=================================================================== RCS file: /home/cvs/OpenXM/doc/install.oxweave,v retrieving revision 1.31 retrieving revision 1.42 diff -u -p -r1.31 -r1.42 --- OpenXM/doc/install.oxweave 2000/04/03 05:59:01 1.31 +++ OpenXM/doc/install.oxweave 2001/12/20 03:44:10 1.42 @@ -1,23 +1,52 @@ -%% $OpenXM: OpenXM/doc/install.oxweave,v 1.30 2000/03/17 03:22:01 takayama Exp $ +%% $OpenXM: OpenXM/doc/install.oxweave,v 1.41 2000/12/22 02:07:55 takayama Exp $ OpenXM/doc/install.oxweave /*&C OpenXM URL : http://www.math.kobe-u.ac.jp/OpenXM + http://www.openxm.org Consult firstly the ERRATA section for your release on this web cite for troubles. OpenXM package : Getting started. +This document is for OpenXM version 1.1.3. (Draft) + + +----------- An instruction for quick installation ----------------- +(cd OpenXM/src ; make configure ; make install) + You will get binaries, libraries, and documents under + OpenXM/bin, OpenXM/lib, OpenXM/doc +(cd OpenXM/misc ; make install) + Shell scripts to start "asir", "sm1", ... will be copied to + /usr/local/bin + +******************************************************************* +(cd OpenXM/src ; make install-kan-ox ; make install-asir-contrib) + You will get only asir (OpenXM version) and kan/sm1. +------------------------------------------------------------------- + */ /*&jp ★ OpenXM GENERIC パッケージの利用方法 この節では, OpenXM package binary distribution のインストール法を説明します. +ソースからインストールする場合は + ★ OpenXM パッケージの Make 法 +を御覧下さい. +RPM, Debian などのパッケージでインストールする場合は + Web ページの説明どうりにパッケージをインストールするだけで + 設定が終了します. + インストールに必要なシステムの仕様については, 動作環境を御覧ください. */ /*&eg ***** HOW TO INSTALL OpenXM GENERIC PACKAGE? In this section, we will explain how to install OpenXM package binary distribution. +If you build from the source, see the section + * How to make OpenXM package? +If you install openxm by using RPM or Debian package, +install the system following the instruction given on our web page. + As to the required environment, see the section "System Requirement" */ /*&jp @@ -123,18 +152,21 @@ If you use only OpenXM clients, skip (3) and (3'). */ /*&jp -(3') bash を利用してる場合, 次の行を ~/.bashrc の最後に加えます. +(3') bash を利用してる場合, 次の行それぞれを ~/.bashrc および ~/.bash_profile +の最後に加えます. */ /*&eg -(3') Append the following line to the end of ~/.bashrc when you are - using bash as your shell. +(3') Append the following lines to the end of ~/.bashrc and ~/.bash_profile + respectively when you are using bash as your shell. */ /*&C - source /xxx/yyy/OpenXM/rc/dot.bashrc + source /xxx/yyy/OpenXM/rc/dot.bashrc (.bashrc) + source ~/.bashrc (.bash_profile) + */ /*&jp @@ -151,36 +183,28 @@ If you use only OpenXM clients, skip (3) and (3'). */ -//&C -//&jp (4) asir の利用には key が必要です. -//&eg (4) You need a key to use asir. -//&C -/*&jp - asir の起動時のメッセージまたは OpenXM/lib/asir/asir_key を - 参照して, key を取得して下さい (数秒しかかかりません). +/*&C - Mail の利用ができて, /var/mail の下にメールを着信できれば, - /xxx/yyy/OpenXM/rc/fetch_asir_key - を実行することにより asir_key を自動で設定できます. + FAQ - FreeBSD の package, Redhat Package manager を利用している - 場合は, /usr/local/OpenXM/lib/asir/asir_key がすでに存在して - いる場合, このファイルは保存されます. - */ +/*&jp +Q. OpenXM の asir OpenXM client を icon でスタートするには? +A. 次の行を, .Xdefaults または, xrdb で読み込むファイルに書いておきます. +*/ /*&eg - Please get the key by following the instruction from asir itself or - that in OpenXM/lib/asir/asir_key (it takes only a few seconds - to get the key). +Q. How to start asir OpenXM clients in the iconic mode? +A. Add the following line to .Xdefaults or a file you read by xrdb. +*/ +/*&C - If you can get your mails under /var/mail, you can automatically set - your key by executing - /xxx/yyy/OpenXM/rc/fetch_asir_key + ox_xterm*iconic: on - If you install the OpenXM package by the pkg_add of FreeBSD or - the redhat package manager, the old key file - /usr/local/OpenXM/lib/asir/asir_key, if exists, is saved. +*/ +/*&C +------------------------------------------------------------- + */ /*&jp @@ -190,9 +214,11 @@ If you use only OpenXM clients, skip (3) and (3'). root になって, pkg_add openxm-version.tgz OpenXM は /usr/local/OpenXM にインストールされます. - あとは, 上の (4) へ. + ここで version は OpenXM の version 番号で, たとえば, 2000, 3/20(Mon) 版は 1.1.2 + pkg_add に失敗した場合は, /var のサイズを大きくしてやりなおして + みて下さい. java および linux emulation が実行に必要です. java が, サーチパスのなかにある必要がありますので, @@ -203,6 +229,16 @@ If you use only OpenXM clients, skip (3) and (3'). インストール終了後のメッセージにしたがい, 必要な設定を おこなって下さい. + jdk は /usr/ports/lang/jdk よりインストールできます. + Linux emulation を有効にするには, + /etc/rc.conf に + linux_enable="YES" + と書き, + /usr/ports/emulators/linux_base を用いて, linux 用の共有ライブラリ等を + インストールしておきます. + (FreeBSD 3.x, 4.x) + + /usr/local にインストールしなかった場合は, (2) を実行して下さい. @@ -216,10 +252,11 @@ If you use only OpenXM clients, skip (3) and (3'). Become the super user and type pkg_add openxm-version.tgz OpenXM will be installed to /usr/local/OpenXM - Go to (4) above. + Here, version is the version number of OpenXM. For example, the version number of the OpenXM of May 20 (Mon), 2000 is 1.1.2 + If you fail "pkd_add", increase the size of /var java and linux emulation are required to run OpenXM packages. Java needs to be in the search path. So, for example, execute pkg_add @@ -227,7 +264,15 @@ If you use only OpenXM clients, skip (3) and (3'). set path=(/usr/local/jdk1.1.8 $path) rehash Following the message of pkg_add after the installation, - set asir_key and path. + set path. + + jdk can be installed by /usr/ports/lang/jdk. + Add the line + linux_enable="YES" + to /etc/rc.conf and install shared libraries for linux + by /usr/ports/emulators/linux_base. + Then, you can emulate linux. + If you do not install under /usr/local, goto (2). @@ -243,16 +288,18 @@ If you use only OpenXM clients, skip (3) and (3'). rpm -i openxm-shared-version-suffix.noarch.rpm rpm -i openxm-binary-version-suffix.i386.rpm OpenXM は /usr/local/OpenXM にインストールされます. - あとは, 上の (4) へ. + ここで version は OpenXM の version 番号で, たとえば, 2000, 3/20(Mon) 版は 1.1.2 suffix は, RPM 版の minor version number. - Debian を利用している場合, コマンド alien で, rpm 形式を deb 形式に - 変換できます. - /usr/local の下へインストールしなかった場合は, (2) を実行して下さい. + libgd のインストールが必要な場合もあります. + libgd がインストールしてない場合, + http://www.redhat.com/downloads へアクセスし, libgd をインストール + して下さい. + */ /*&eg @@ -265,22 +312,28 @@ If you use only OpenXM clients, skip (3) and (3'). rpm -i openxm-shared-version-suffix.noarch.rpm rpm -i openxm-binary-version-suffix.i386.rpm OpenXM will be installed to /usr/local/OpenXM - Go to (4) above. + Here, version is the version number of OpenXM. For example, the version number of the OpenXM of May 20 (Mon), 2000 is 1.1.2 suffix is the minor version number of the package. - If you are using debian, please use the command alien to translate - rpm to deb. - If you do not install under /usr/local, goto (2). + You might need to install libgd. + If it is not installed in your system, access to + http://www.redhat.com/downloads and get libgd. */ /*&C +--------------------------------------------------------- + +*/ + +/*&C + ***** OpenXM client programs under OpenXM/bin or /usr/local/bin: asir oxmath @@ -303,6 +356,15 @@ If you use only OpenXM clients, skip (3) and (3'). 70% OpenXM/bin/ox_math, OpenXM/bin/math2ox OpenXM/bin/sm1, ox_sm1 on Linux libc6. + +**** OpenXM server and client programs (under development) + included only in the source distribution + OpenXM/src/Macaulay2 ( M2 server and client ) + OpenXM/src/ruby ( Ruby client) + +**** Utilities + OpenXM/doc/oxlib ( how to link oxservers as libraries ) + */ /*&C @@ -321,6 +383,10 @@ csh を利用している場合, .cshrc で set path=(/usr/local/jdk1.1.8/bin $path) として, jdk の java, javac をサーチパスにいれます. +jdk の入手先: FreeBSD --- /usr/ports/java/jdk を見てください. + Linux --- http://java.sun.com/products/jdk/1.2/ja + http://java.sun.com/j2se/1.3/ja + 注意: なお, Kaffe 1.0.b4 の java は, class BigInteger に method toByteArray が含まれてないため, OpenMath モジュールでは使用できません. @@ -337,6 +403,12 @@ Bash users put the following line to .bashrc PATH=/usr/local/jdk1.1.8/bin:$PATH export PATH + +Where can I get jdk? : FreeBSD --- see /usr/ports/java/jdk + Linux --- http://java.sun.com/products/jdk/1.2/ja + http://java.sun.com/j2se/1.3/ja + + Remark: The Java interpreter of Kaffe 1.0.b4 does not contain the method toByteArray in the class BigInteger. @@ -345,9 +417,9 @@ So, it cannot be used for the OpenMath module. /*&C +-------------------------------------------------------- - */ /*&jp ★ 動作環境 @@ -359,7 +431,7 @@ So, it cannot be used for the OpenMath module. */ /*&C -OS: FreeBSD 3.3 (Intel CPU), +OS: FreeBSD 3.3, 3.4, 4.x (Intel CPU), Linux systems (Intel CPU): Most Linux with libc5 and with libc6 (glibc 2.x). @@ -421,6 +493,12 @@ The installation is completed. */ +/*&C + +----------------------------------------------------- + +*/ + /*&jp ★ 文書 @@ -548,6 +626,10 @@ OpenXM/Copyright を御覧ください. See OpenXM/Copyright. */ +//&C +//&C ---------------------------------------------- +//&C + /*&eg @@ -559,26 +641,46 @@ See OpenXM/Copyright. ★ OpenXM パッケージの Make 法 - FreeBSD 2.2.8, FreeBSD 3.3, Linux で動作するものと期待してます. - Linux glib6 では, いまのところ, /usr/include/features.h - で #define __FAVOR_BSD 1 してコンパイルする必要がありしたが, + FreeBSD 3.x, FreeBSD 4.x, Linux で動作するものと期待してます. + (Linux glib6 では, いまのところ, /usr/include/features.h + で #define __FAVOR_BSD 1 してコンパイルする必要がありしたが, 一部のソースを -D_BSD_SOURCE option をつけて gcc でコンパイルするように変えてます - (setjmp と sigsetjmp の問題, dirty trick). + (setjmp と sigsetjmp の問題, dirty trick) 現在では問題ありません. ) OpenXM, OpenXM_contrib, OpenXM_contrib2 が必要です. + ftp.math.kobe-u.ac.jp/OpenXM/1.1.3 より + openxm-1.1.3.tar.gz + を get して展開して下さい. + tar xzvf openxm-1.1.3.tar.gz + + openxm-1.1.3/OpenXM openxm-1.1.3/OpenXM_contrib + openxm-1.1.3/OpenXM_contrib2 + が生成されます. + cvs コミッタの場合次のようにしてソースをとりよせます. */ /*&eg * How to make OpenXM package? - We have tested the OpenXM package on FreeBSD 2.2.8, FreeBSD 3.3, Linux. - On Linux glib6, we needed to define + We have tested the OpenXM package on FreeBSD 3.x, FreeBSD 4.x, Linux. + (On Linux glib6, we needed to define #define __FAVOR_BSD 1 in /usr/include/features.h, but now we are compiling some sources with -D_BSD_SOURCE - (setjmp vs sigsetjmp). + (setjmp vs sigsetjmp). So, you do not need to make this change.) Do you have directories OpenXM, OpenXM_contrib, OpenXM_contrib2? + get + openxm-1.1.3.tar.gz + from ftp.math.kobe-u.ac.jp/OpenXM/1.1.3 + Expand it by + tar xzvf openxm-1.1.3.tar.gz + + Then, you will get + openxm-1.1.3/OpenXM openxm-1.1.3/OpenXM_contrib + openxm-1.1.3/OpenXM_contrib2 + + If you are a CVS committer, then you can get all sources as follows: */ //&C rcvs checkout OpenXM OpenXM_contrib OpenXM_contrib2 @@ -598,7 +700,7 @@ OpenXM/src/OpenMath のコンパイルおよび利用には には, jdk (java 環境) が必要です. Documents を生成するには, tex, ptex (ascii 日本語 tex), dvips, texinfo, -texi2html, nkf, +texi2html, nkf, jlatex2html が必要です. 詳しくは Makefiles を見て下さい. Document は, binary distribution の OpenXM/doc, OpenXM/lib より得るのが簡単です. @@ -609,7 +711,7 @@ you need jdk (java environment). In order to generate the full documentation including Japanese documents, you need tex, ptex (ASCII Inc. Japanese tex), dvips, texinfo, texi2html, -nkf. See each Makefile. +nkf, jlatex2html. See each Makefile. The generated documents are in OpenXM/doc and OpenXM/lib in the binary distribution. If you do not like to install Japanese environment such as ptex, @@ -619,30 +721,120 @@ prepare empty shell scripts ptex and nkf. /*&C */ + +/*&eg +To run the system, you need to read OpenXM/rc/dot.cshrc or +OpenXM/rc/dot.bashrc by the source +command for setting proper environmental variable values. + +By the commands + cd OpenXM/rc + make +you can generate dot.cshrc and dot.bashrc. +Read these file by the source command in your .cshrc +or .bashrc (or .bash_profile). +*/ /*&jp - - OpenXM_contrib2/asir2000 の配布を受けてない場合 (ソースライセンスを - 富士通より受ける必要があります), - OpenXM/src/Makefile の各モジュール名 たとえば - make all-kan96xx - などと各モジュール名を指定してコンパイルして下さい. +システムを動かすには, OpenXM/rc/dot.cshrc または +OpenXM/rc/dot.bashrc を source コマンドで +よみこみ環境変数の値を適切に設定する必要があります. - または - OpenXM/src/asir2000 の Makefile を Makefile.forSkip に置き換えて - 下さい. +コマンド + cd OpenXM/rc + make +で dot.cshrc および dot.bashrc が生成されます. +これらのファイルを source コマンドで, +.cshrc または .bashrc (または .bash_profile) より読むようにして下さい. +*/ +/*&C */ + +//&C --------------------------------------------------------- + /*&eg - - If you cannot get a source liscence of OpenXM_contrib2/asir2000 - from Fujitsu labs, - compile each modules independently, e.g., - make all-kan96xx +***** How to generate a subset of the full OpenXM package + from the head branch. + * The souce tarball of the head branch is at + ftp.math.kobe-u.ac.jp/pub/OpenXM/Head/openxm-head.tar.gz + Get this tarball by the ftp command. Extract the directories + OpenXM OpenXM_contrib OpenXM_contrib2 + by + tar xzvf openxm-head.tar.gz +*/ +/*&jp +★ OpenXM package の一部分のみ生成する方法 (head branch より). + * Head ブランチの tarball は + ftp.math.kobe-u.ac.jp/pub/OpenXM/Head/openxm-head.tar.gz + にあります. これを ftp で取得してから + tar xzvf openxm-head.tar.gz + を展開してください. + OpenXM OpenXM_contrib OpenXM_contrib2 が作成されます. +*/ +/*&C - Or, replace Makefile by Makefile.forSkip in OpenXM/src/asir2000. +*/ +/*&eg + [Subpackage asir] If you want to generate only Risa/Asir, + type in as follows. +*/ +/*&jp + [部分パッケージ asir] Risa/Asir のみを生成したい場合は, + つぎのように入力します. +*/ +/*&C + (cd OpenXM/src ; make install-asir) + (cd OpenXM/rc ; make ) + */ +/*&eg + Copy the shell script "asir" at OpenXM/rc in your search path, e.g., + /usr/local/bin or ~/bin + Or, read OpenXM/rc/dot.bashrc or OpenXM/rc/dot.bashrc by the source + command from your ~/.bashrc or ~/.cshrc. +*/ +/*&jp + OpenXM/rc の下のシェルスクリプト "asir" をサーチパスにコピーして + ください (たとえば, /usr/local/bin or ~/bin へ). + または OpenXM/rc/dot.bashrc か OpenXM/rc/dot.cshrc を + source コマンドで ~/.bashrc か ~/.cshrc より読み込んでください. +*/ +/*&C +*/ +/*&eg + [Subpackage kan-ox] If you want to generate only kan/k0, kan/sm1 and asir + type in as follows. +*/ +/*&jp + [部分パッケージ kan-ox] Kan/k0, Kan/sm1, asir のみを生成したい場合は, + つぎのように入力します. +*/ +/*&C + + (cd OpenXM/src ; make install-kan-ox) + (cd OpenXM/rc ; make ) + +*/ +/*&eg + Copy the shell script "asir", "sm1" and "openxm" at OpenXM/rc + to your search path, e.g., + /usr/local/bin or ~/bin + Or, read OpenXM/rc/dot.bashrc or OpenXM/rc/dot.bashrc by the source + command from your ~/.bashrc or ~/.cshrc. +*/ +/*&jp + OpenXM/rc の下のシェルスクリプト "asir", "sm1", "openxm" を + サーチパスにコピーして + ください (たとえば, /usr/local/bin or ~/bin へ). + または OpenXM/rc/dot.bashrc か OpenXM/rc/dot.cshrc を + source コマンドで ~/.bashrc か ~/.cshrc より読み込んでください. +*/ + +//&C +//&C ------------------------------------------------------ +//&C /*&jp [OpenXM 下のファイルの構成メモ]