[BACK]Return to jtexinfo.tex CVS log [TXT][DIR] Up to [local] / OpenXM / src / asir-doc

Annotation of OpenXM/src/asir-doc/jtexinfo.tex, Revision 1.1.1.1

1.1       noro        1: %% TeX macros to handle texinfo files
                      2:
                      3: %   Copyright (C) 1985, 1986, 1988, 1990, 1991 Free Software Foundation, Inc.
                      4:
                      5: %This texinfo.tex file is free software; you can redistribute it and/or
                      6: %modify it under the terms of the GNU General Public License as
                      7: %published by the Free Software Foundation; either version 2, or (at
                      8: %your option) any later version.
                      9:
                     10: %This texinfo.tex file is distributed in the hope that it will be
                     11: %useful, but WITHOUT ANY WARRANTY; without even the implied warranty
                     12: %of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
                     13: %General Public License for more details.
                     14:
                     15: %You should have received a copy of the GNU General Public License
                     16: %along with this texinfo.tex file; see the file COPYING.  If not, write
                     17: %to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
                     18: %USA.
                     19:
                     20:
                     21: %In other words, you are welcome to use, share and improve this program.
                     22: %You are forbidden to forbid anyone else to use, share and improve
                     23: %what you give them.   Help stamp out software-hoarding!
                     24:
                     25: \def\texinfoversion{2.72}
                     26: \message{Loading texinfo package [Version \texinfoversion]:}
                     27: \message{}
                     28:
                     29: %************************************************
                     30: % Patch for ASCII/NTT Jtexinfo by ntp@isl.mei.co.jp, kusumi@isl.mei.co.jp
                     31: % Original patch for NTT Jtexinfo by S. Tomura
                     32: %************************************************
                     33:
                     34: \newif\ifisJTeX
                     35: \newif\ifisASCII
                     36:
                     37: \expandafter\ifx\csname gtfam\endcsname\relax
                     38:   % not ASCIITeX
                     39:   \expandafter\ifx\csname jfont\endcsname\relax
                     40:     % nor NTTTeX
                     41:     \isJTeXfalse
                     42:   \else
                     43:     \isJTeXtrue
                     44:     \isASCIIfalse
                     45:   \fi
                     46: \else
                     47:   \isJTeXtrue
                     48:   \isASCIItrue
                     49: \fi
                     50:
                     51: \ifisJTeX
                     52:   \def\ASCJtexinfoversion{j1.05}
                     53:   \message{  with ASCII/NTT jtexinfo extension [Version \ASCJtexinfoversion]:}
                     54:   \ifisASCII
                     55:     \message{Hmm, Your Japanese-TeX seems to be an ASCII version. Loading.}
                     56:   \else
                     57:     \message{Hmm, Your Japanese-TeX seems to be an NTT version. Loading.}
                     58:   \fi
                     59: \fi
                     60:
                     61:
                     62: % Print the version number if in a .fmt file.
                     63: \everyjob{\message{[Texinfo version \texinfoversion]}\message{}}
                     64:
                     65: % Save some parts of plain tex whose names we will redefine.
                     66:
                     67: \let\ptexlbrace=\{
                     68: \let\ptexrbrace=\}
                     69: \let\ptexdots=\dots
                     70: \let\ptexdot=\.
                     71: \let\ptexstar=\*
                     72: \let\ptexend=\end
                     73: \let\ptexbullet=\bullet
                     74: \let\ptexb=\b
                     75: \let\ptexc=\c
                     76: \let\ptexi=\i
                     77: \let\ptext=\t
                     78: \let\ptexl=\l
                     79: \let\ptexL=\L
                     80:
                     81: \def\tie{\penalty 10000\ }     % Save plain tex definition of ~.
                     82:
                     83: \message{Basics,}
                     84: \chardef\other=12
                     85:
                     86: % If this character appears in an error message or help string, it
                     87: % starts a new line in the output.
                     88: \newlinechar = `^^J
                     89:
                     90: \hyphenation{ap-pen-dix}
                     91: \hyphenation{mini-buf-fer mini-buf-fers}
                     92: \hyphenation{eshell}
                     93:
                     94: % Margin to add to right of even pages, to left of odd pages.
                     95: \newdimen \bindingoffset  \bindingoffset=0pt
                     96: \newdimen \normaloffset   \normaloffset=\hoffset
                     97: \newdimen\pagewidth \newdimen\pageheight
                     98: \pagewidth=\hsize \pageheight=\vsize
                     99:
                    100: % Sometimes it is convenient to have everything in the transcript file
                    101: % and nothing on the terminal.  We don't just call \tracingall here,
                    102: % since that produces some useless output on the terminal.
                    103: %
                    104: \def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
                    105: \def\loggingall{\tracingcommands2 \tracingstats2
                    106:    \tracingpages1 \tracingoutput1 \tracinglostchars1
                    107:    \tracingmacros2 \tracingparagraphs1 \tracingrestores1
                    108:    \showboxbreadth\maxdimen\showboxdepth\maxdimen
                    109: }%
                    110:
                    111: %---------------------Begin change-----------------------
                    112: %
                    113: %%%% For @cropmarks command.
                    114: % Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986
                    115: %
                    116: \newdimen\cornerlong \newdimen\cornerthick
                    117: \newdimen \topandbottommargin
                    118: \newdimen \outerhsize \newdimen \outervsize
                    119: \cornerlong=1pc\cornerthick=.3pt       % These set size of cropmarks
                    120: \outerhsize=7in
                    121: %\outervsize=9.5in
                    122: % Alternative @smallbook page size is 9.25in
                    123: \outervsize=9.25in
                    124: \topandbottommargin=.75in
                    125: %
                    126: %---------------------End change-----------------------
                    127:
                    128: % \onepageout takes a vbox as an argument.  Note that \pagecontents
                    129: % does insertions itself, but you have to call it yourself.
                    130: \chardef\PAGE=255  \output={\onepageout{\pagecontents\PAGE}}
                    131: \def\onepageout#1{\hoffset=\normaloffset
                    132: \ifodd\pageno  \advance\hoffset by \bindingoffset
                    133: \else \advance\hoffset by -\bindingoffset\fi
                    134: {\escapechar=`\\\relax % makes sure backslash is used in output files.
                    135: \shipout\vbox{{\let\hsize=\pagewidth \makeheadline} \pagebody{#1}%
                    136: {\let\hsize=\pagewidth \makefootline}}}%
                    137: \advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
                    138:
                    139: %%%% For @cropmarks command %%%%
                    140:
                    141: % Here is a modification of the main output routine for Near East Publications
                    142: % This provides right-angle cropmarks at all four corners.
                    143: % The contents of the page are centerlined into the cropmarks,
                    144: % and any desired binding offset is added as an \hskip on either
                    145: % site of the centerlined box.  (P. A. MacKay, 12 November, 1986)
                    146: %
                    147: \def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up
                    148:                 \shipout
                    149:                 \vbox to \outervsize{\hsize=\outerhsize
                    150:                  \vbox{\line{\ewtop\hfill\ewtop}}
                    151:                  \nointerlineskip
                    152:                  \line{\vbox{\moveleft\cornerthick\nstop}
                    153:                        \hfill
                    154:                        \vbox{\moveright\cornerthick\nstop}}
                    155:                  \vskip \topandbottommargin
                    156:                  \centerline{\ifodd\pageno\hskip\bindingoffset\fi
                    157:                        \vbox{
                    158:                        {\let\hsize=\pagewidth \makeheadline}
                    159:                        \pagebody{#1}
                    160:                        {\let\hsize=\pagewidth \makefootline}}
                    161:                        \ifodd\pageno\else\hskip\bindingoffset\fi}
                    162:                 \vskip \topandbottommargin plus1fill minus1fill
                    163:                  \boxmaxdepth\cornerthick
                    164:                  \line{\vbox{\moveleft\cornerthick\nsbot}
                    165:                        \hfill
                    166:                        \vbox{\moveright\cornerthick\nsbot}}
                    167:                  \nointerlineskip
                    168:                  \vbox{\line{\ewbot\hfill\ewbot}}
                    169:        }
                    170:   \advancepageno
                    171:   \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
                    172: %
                    173: % Do @cropmarks to get crop marks
                    174: \def\cropmarks{\let\onepageout=\croppageout }
                    175:
                    176: \def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
                    177: {\catcode`\@ =11
                    178: \gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
                    179: \dimen@=\dp#1 \unvbox#1
                    180: \ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
                    181: \ifr@ggedbottom \kern-\dimen@ \vfil \fi}
                    182: }
                    183:
                    184: %
                    185: % Here are the rules for the cropmarks.  Note that they are
                    186: % offset so that the space between them is truly \outerhsize or \outervsize
                    187: % (P. A. MacKay, 12 November, 1986)
                    188: %
                    189: \def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
                    190: \def\nstop{\vbox
                    191:   {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
                    192: \def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
                    193: \def\nsbot{\vbox
                    194:   {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
                    195:
                    196: % Parse an argument, then pass it to #1.
                    197: % The argument can be delimited with [...] or with "..." or braces
                    198: % or it can be a whole line.
                    199: % #1 should be a macro which expects
                    200: % an ordinary undelimited TeX argument.
                    201:
                    202: \def\parsearg #1{\let\next=#1\begingroup\obeylines\futurelet\temp\parseargx}
                    203:
                    204: \def\parseargx{%
                    205: \ifx \obeyedspace\temp \aftergroup\parseargdiscardspace \else%
                    206: \aftergroup \parseargline %
                    207: \fi \endgroup}
                    208:
                    209: {\obeyspaces %
                    210: \gdef\parseargdiscardspace {\begingroup\obeylines\futurelet\temp\parseargx}}
                    211:
                    212: \gdef\obeyedspace{\ }
                    213:
                    214: \def\parseargline{\begingroup \obeylines \parsearglinex}
                    215: {\obeylines %
                    216: \gdef\parsearglinex #1^^M{\endgroup \next {#1}}}
                    217:
                    218: \def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
                    219:
                    220: %% These are used to keep @begin/@end levels from running away
                    221: %% Call \inENV within environments (after a \begingroup)
                    222: \newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
                    223: \def\ENVcheck{%
                    224: \ifENV\errmessage{Still within an environment.  Type Return to continue.}
                    225: \endgroup\fi} % This is not perfect, but it should reduce lossage
                    226:
                    227: % @begin foo  is the same as @foo, for now.
                    228: \newhelp\EMsimple{Type <Return> to continue}
                    229:
                    230: \outer\def\begin{\parsearg\beginxxx}
                    231:
                    232: \def\beginxxx #1{%
                    233: \expandafter\ifx\csname #1\endcsname\relax
                    234: {\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
                    235: \csname #1\endcsname\fi}
                    236:
                    237: %% @end foo executes the definition of \Efoo.
                    238: %% foo can be delimited by doublequotes or brackets.
                    239:
                    240: \def\end{\parsearg\endxxx}
                    241:
                    242: \def\endxxx #1{%
                    243: \expandafter\ifx\csname E#1\endcsname\relax
                    244: \expandafter\ifx\csname #1\endcsname\relax
                    245: \errmessage{Undefined command @end #1}\else
                    246: \errorE{#1}\fi\fi
                    247: \csname E#1\endcsname}
                    248: \def\errorE#1{
                    249: {\errhelp=\EMsimple \errmessage{@end #1 not within #1 environment}}}
                    250:
                    251: % Single-spacing is done by various environments.
                    252:
                    253: \newskip\singlespaceskip \singlespaceskip = \baselineskip
                    254: \def\singlespace{%
                    255: {\advance \baselineskip by -\singlespaceskip
                    256: \kern \baselineskip}%
                    257: \baselineskip=\singlespaceskip
                    258: }
                    259:
                    260: %% Simple single-character @ commands
                    261:
                    262: % @@ prints an @
                    263: % Kludge this until the fonts are right (grr).
                    264: \def\@{{\tt \char '100}}
                    265:
                    266: % Define @` and @' to be the same as ` and '
                    267: % but suppressing ligatures.
                    268: \def\`{{`}}
                    269: \def\'{{'}}
                    270:
                    271: % Used to generate quoted braces.
                    272:
                    273: \def\mylbrace {{\tt \char '173}}
                    274: \def\myrbrace {{\tt \char '175}}
                    275: \let\{=\mylbrace
                    276: \let\}=\myrbrace
                    277:
                    278: % @: forces normal size whitespace following.
                    279: \def\:{\spacefactor=1000 }
                    280:
                    281: % @* forces a line break.
                    282: \def\*{\hfil\break\hbox{}\ignorespaces}
                    283:
                    284: % @. is an end-of-sentence period.
                    285: \def\.{.\spacefactor=3000 }
                    286:
                    287: % @w prevents a word break.  Without the \leavevmode, @w at the
                    288: % beginning of a paragraph, when TeX is still in vertical mode, would
                    289: % produce a whole line of output instead of starting the paragraph.
                    290: \def\w#1{\leavevmode\hbox{#1}}
                    291:
                    292: % @group ... @end group forces ... to be all on one page, by enclosing
                    293: % it in a TeX vbox.  We use \vtop instead of \vbox to construct the box
                    294: % to keep its height that of a normal line.  According to the rules for
                    295: % \topskip (p.114 of the TeXbook), the glue inserted is
                    296: % max (\topskip - \ht (first item), 0).  If that height is large,
                    297: % therefore, no glue is inserted, and the space between the headline and
                    298: % the text is small, which looks bad.
                    299: %
                    300: \def\group{\begingroup
                    301:   \ifnum\catcode13=\active \else
                    302:     \errhelp = \groupinvalidhelp
                    303:     \errmessage{@group invalid in context where filling is enabled}%
                    304:   \fi
                    305:   \def\Egroup{\egroup\endgroup}%
                    306:   \vtop\bgroup
                    307: }
                    308: %
                    309: % TeX puts in an \escapechar (i.e., `@') at the beginning of the help
                    310: % message, so this ends up printing `@group can only ...'.
                    311: %
                    312: \newhelp\groupinvalidhelp{%
                    313: group can only be used in environments such as @example,^^J%
                    314: where each line of input produces a line of output.}
                    315:
                    316: % @need space-in-mils
                    317: % forces a page break if there is not space-in-mils remaining.
                    318:
                    319: \newdimen\mil  \mil=0.001in
                    320:
                    321: \def\need{\parsearg\needx}
                    322:
                    323: % Old definition--didn't work.
                    324: %\def\needx #1{\par %
                    325: %% This method tries to make TeX break the page naturally
                    326: %% if the depth of the box does not fit.
                    327: %{\baselineskip=0pt%
                    328: %\vtop to #1\mil{\vfil}\kern -#1\mil\penalty 10000
                    329: %\prevdepth=-1000pt
                    330: %}}
                    331:
                    332: \def\needx#1{%
                    333:   % Go into vertical mode, so we don't make a big box in the middle of a
                    334:   % paragraph.
                    335:   \par
                    336:   %
                    337:   % Don't add any leading before our big empty box, but allow a page
                    338:   % break, since the best break might be right here.
                    339:   \allowbreak
                    340:   \nointerlineskip
                    341:   \vtop to #1\mil{\vfil}%
                    342:   %
                    343:   % TeX does not even consider page breaks if a penalty added to the
                    344:   % main vertical list is 10000 or more.  But in order to see if the
                    345:   % empty box we just added fits on the page, we must make it consider
                    346:   % page breaks.  On the other hand, we don't want to actually break the
                    347:   % page after the empty box.  So we use a penalty of 9999.
                    348:   %
                    349:   % There is an extremely small chance that TeX will actually break the
                    350:   % page at this \penalty, if there are no other feasible breakpoints in
                    351:   % sight.  (If the user is using lots of big @group commands, which
                    352:   % almost-but-not-quite fill up a page, TeX will have a hard time doing
                    353:   % good page breaking, for example.)  However, I could not construct an
                    354:   % example where a page broke at this \penalty; if it happens in a real
                    355:   % document, then we can reconsider our strategy.
                    356:   \penalty9999
                    357:   %
                    358:   % Back up by the size of the box, whether we did a page break or not.
                    359:   \kern -#1\mil
                    360:   %
                    361:   % Do not allow a page break right after this kern.
                    362:   \nobreak
                    363: }
                    364:
                    365: % @br   forces paragraph break
                    366:
                    367: \let\br = \par
                    368:
                    369: % @dots{}  output some dots
                    370:
                    371: \def\dots{$\ldots$}
                    372:
                    373: % @page    forces the start of a new page
                    374:
                    375: \def\page{\par\vfill\supereject}
                    376:
                    377: % @exdent text....
                    378: % outputs text on separate line in roman font, starting at standard page margin
                    379:
                    380: % This records the amount of indent in the innermost environment.
                    381: % That's how much \exdent should take out.
                    382: \newskip\exdentamount
                    383:
                    384: % This defn is used inside fill environments such as @defun.
                    385: \def\exdent{\parsearg\exdentyyy}
                    386: \def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm\mc #1}}\hfil\break}}
                    387:
                    388: % This defn is used inside nofill environments such as @example.
                    389: \def\nofillexdent{\parsearg\nofillexdentyyy}
                    390: \def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
                    391: \leftline{\hskip\leftskip{\rm\mc #1}}}}
                    392:
                    393: %\hbox{{\rm#1}}\hfil\break}}
                    394:
                    395: % @include file    insert text of that file as input.
                    396:
                    397: \def\include{\parsearg\includezzz}
                    398: \def\includezzz #1{{\def\thisfile{#1}\input #1
                    399: }}
                    400:
                    401: \def\thisfile{}
                    402:
                    403: % @center line   outputs that line, centered
                    404:
                    405: \def\center{\parsearg\centerzzz}
                    406: \def\centerzzz #1{{\advance\hsize by -\leftskip
                    407: \advance\hsize by -\rightskip
                    408: \centerline{#1}}}
                    409:
                    410: % @sp n   outputs n lines of vertical space
                    411:
                    412: \def\sp{\parsearg\spxxx}
                    413: \def\spxxx #1{\par \vskip #1\baselineskip}
                    414:
                    415: % @comment ...line which is ignored...
                    416: % @c is the same as @comment
                    417: % @ignore ... @end ignore  is another way to write a comment
                    418:
                    419: \def\comment{\catcode 64=\other \catcode 123=\other \catcode 125=\other%
                    420: \parsearg \commentxxx}
                    421:
                    422: \def\commentxxx #1{\catcode 64=0 \catcode 123=1 \catcode 125=2 }
                    423:
                    424: \let\c=\comment
                    425:
                    426: % Prevent errors for section commands.
                    427: % Used in @ignore and in failing conditionals.
                    428: \def\ignoresections{%
                    429: \let\chapter=\relax
                    430: \let\unnumbered=\relax
                    431: \let\top=\relax
                    432: \let\unnumberedsec=\relax
                    433: \let\unnumberedsection=\relax
                    434: \let\unnumberedsubsec=\relax
                    435: \let\unnumberedsubsection=\relax
                    436: \let\unnumberedsubsubsec=\relax
                    437: \let\unnumberedsubsubsection=\relax
                    438: \let\section=\relax
                    439: \let\subsec=\relax
                    440: \let\subsubsec=\relax
                    441: \let\subsection=\relax
                    442: \let\subsubsection=\relax
                    443: \let\appendix=\relax
                    444: \let\appendixsec=\relax
                    445: \let\appendixsection=\relax
                    446: \let\appendixsubsec=\relax
                    447: \let\appendixsubsection=\relax
                    448: \let\appendixsubsubsec=\relax
                    449: \let\appendixsubsubsection=\relax
                    450: \let\contents=\relax
                    451: \let\smallbook=\relax
                    452: \let\titlepage=\relax
                    453: }
                    454:
                    455: \def\ignore{\begingroup\ignoresections
                    456: % Make sure that spaces turn into tokens that match what \ignorexxx wants.
                    457: \catcode32=10
                    458: \ignorexxx}
                    459: \long\def\ignorexxx #1\end ignore{\endgroup\ignorespaces}
                    460:
                    461: \def\direntry{\begingroup\direntryxxx}
                    462: \long\def\direntryxxx #1\end direntry{\endgroup\ignorespaces}
                    463:
                    464: % Conditionals to test whether a flag is set.
                    465:
                    466: \def\ifset{\begingroup\ignoresections\parsearg\ifsetxxx}
                    467:
                    468: \def\ifsetxxx #1{\endgroup
                    469: \expandafter\ifx\csname IF#1\endcsname\relax \let\temp=\ifsetfail
                    470: \else \let\temp=\relax \fi
                    471: \temp}
                    472: \def\Eifset{}
                    473: \def\ifsetfail{\begingroup\ignoresections\ifsetfailxxx}
                    474: \long\def\ifsetfailxxx #1\end ifset{\endgroup\ignorespaces}
                    475:
                    476: \def\ifclear{\begingroup\ignoresections\parsearg\ifclearxxx}
                    477:
                    478: \def\ifclearxxx #1{\endgroup
                    479: \expandafter\ifx\csname IF#1\endcsname\relax \let\temp=\relax
                    480: \else \let\temp=\ifclearfail \fi
                    481: \temp}
                    482: \def\Eifclear{}
                    483: \def\ifclearfail{\begingroup\ignoresections\ifclearfailxxx}
                    484: \long\def\ifclearfailxxx #1\end ifclear{\endgroup\ignorespaces}
                    485:
                    486: % @set foo     to set the flag named foo.
                    487: % @clear foo   to clear the flag named foo.
                    488: \def\set{\parsearg\setxxx}
                    489: \def\setxxx #1{
                    490: \expandafter\let\csname IF#1\endcsname=\set}
                    491:
                    492: \def\clear{\parsearg\clearxxx}
                    493: \def\clearxxx #1{
                    494: \expandafter\let\csname IF#1\endcsname=\relax}
                    495:
                    496: % Some texinfo constructs that are trivial in tex
                    497:
                    498: \def\iftex{}
                    499: \def\Eiftex{}
                    500: \def\ifinfo{\begingroup\ignoresections\ifinfoxxx}
                    501: \long\def\ifinfoxxx #1\end ifinfo{\endgroup\ignorespaces}
                    502:
                    503: \long\def\menu #1\end menu{}
                    504: \def\asis#1{#1}
                    505:
                    506: % @math means output in math mode.
                    507: % We don't use $'s directly in the definition of \math because control
                    508: % sequences like \math are expanded when the toc file is written.  Then,
                    509: % we read the toc file back, the $'s will be normal characters (as they
                    510: % should be, according to the definition of Texinfo).  So we must use a
                    511: % control sequence to switch into and out of math mode.
                    512: %
                    513: % This isn't quite enough for @math to work properly in indices, but it
                    514: % seems unlikely it will ever be needed there.
                    515: %
                    516: \let\implicitmath = $
                    517: \def\math#1{\implicitmath #1\implicitmath}
                    518:
                    519: % enhancements of @node by kusumi@isl.mei
                    520: %   to treat following node correctly.(containing '[' and ']' in this order)
                    521: %     @node $[, $], $prev, $upper
                    522: %\def\node{\ENVcheck\parsearg\nodezzz}
                    523: %\def\nodezzz#1{\nodexxx [#1,]}
                    524: %\def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
                    525: \def\node{\ENVcheck\parsearg\nodezzz}
                    526: \def\nodezzz#1{\nodexxx#1,\relax\relax}
                    527: \def\nodexxx#1,#2,\relax\relax{\gdef\lastnode{#1}}
                    528: \let\lastnode=\relax
                    529:
                    530: \def\donoderef{\ifx\lastnode\relax\else
                    531: \expandafter\expandafter\expandafter\setref{\lastnode}\fi
                    532: \let\lastnode=\relax}
                    533:
                    534: \def\unnumbnoderef{\ifx\lastnode\relax\else
                    535: \expandafter\expandafter\expandafter\unnumbsetref{\lastnode}\fi
                    536: \let\lastnode=\relax}
                    537:
                    538: \def\appendixnoderef{\ifx\lastnode\relax\else
                    539: \expandafter\expandafter\expandafter\appendixsetref{\lastnode}\fi
                    540: \let\lastnode=\relax}
                    541:
                    542: \let\refill=\relax
                    543:
                    544: % @setfilename is done at the beginning of every texinfo file.
                    545: % So open here the files we need to have open while reading the input.
                    546: % This makes it possible to make a .fmt file for texinfo.
                    547: \def\setfilename{%
                    548:    \readauxfile
                    549:    \opencontents
                    550:    \openindices
                    551:    \fixbackslash  % Turn off hack to swallow `\input texinfo'.
                    552:    \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
                    553:    \comment % Ignore the actual filename.
                    554: }
                    555:
                    556: \outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
                    557:
                    558: \def\inforef #1{\inforefzzz #1,,,,**}
                    559: \def\inforefzzz #1,#2,#3,#4**{See Info file \file{\losespace#3{}},
                    560:   node \samp{\losespace#1{}}}
                    561: \def\losespace #1{#1}
                    562:
                    563: \message{fonts,}
                    564:
                    565: % Font-change commands.
                    566:
                    567: % Texinfo supports the sans serif font style, which plain TeX does not.
                    568: % So we set up a \sf analogous to plain's \rm, etc.
                    569: \newfam\sffam
                    570: \def\sf{\fam=\sffam \tensf}
                    571: \let\li = \sf % Sometimes we call it \li, not \sf.
                    572:
                    573: %**
                    574: % For NTT TeX, define dummy font families compatible with ASCII.
                    575: % Unfortunately, \newfam in the \if..\fi raise an error, so we should
                    576: % redefine \newfam even with ASCII Japanese TeX.
                    577: %
                    578: \newfam\minfam \def\mc{\fam\minfam\tenmin}%
                    579: \newfam\gtfam \def\gt{\fam\gtfam\tengt}%
                    580: \ifisJTeX\else
                    581: \let\mc=\relax
                    582: \let\gt=\relax
                    583: \fi
                    584: %** by ntp@isl.mei
                    585:
                    586: %% Try out Computer Modern fonts at \magstephalf
                    587: \let\mainmagstep=\magstephalf
                    588:
                    589: \ifx\bigger\relax
                    590: \let\mainmagstep=\magstep1
                    591: \font\textrm=cmr12
                    592: \font\texttt=cmtt12
                    593: \else
                    594: \font\textrm=cmr10 scaled \mainmagstep
                    595: \font\texttt=cmtt10 scaled \mainmagstep
                    596: \fi
                    597: % Instead of cmb10, you many want to use cmbx10.
                    598: % cmbx10 is a prettier font on its own, but cmb10
                    599: % looks better when embedded in a line with cmr10.
                    600: \font\textbf=cmb10 scaled \mainmagstep
                    601: \font\textit=cmti10 scaled \mainmagstep
                    602: \font\textsl=cmsl10 scaled \mainmagstep
                    603: \font\textsf=cmss10 scaled \mainmagstep
                    604: \font\textsc=cmcsc10 scaled \mainmagstep
                    605: \font\texti=cmmi10 scaled \mainmagstep
                    606: \font\textsy=cmsy10 scaled \mainmagstep
                    607: %**
                    608: \ifisJTeX
                    609: \ifisASCII
                    610:   \font\textmin=min10 scaled \mainmagstep
                    611:   \font\textgt=goth10 scaled \mainmagstep
                    612: \else
                    613:   \jfont\textmin=dm10 scaled \mainmagstep
                    614:   \jfont\textgt=dg10 scaled \mainmagstep
                    615: \fi
                    616: \else
                    617:   \let\textmin=\relax
                    618:   \let\textgt=\relax
                    619: \fi
                    620: % ntp@isl.mei.co.jp
                    621: %**
                    622:
                    623: % A few fonts for @defun, etc.
                    624: \font\defbf=cmbx10 scaled \magstep1 %was 1314
                    625: \font\deftt=cmtt10 scaled \magstep1
                    626: %**
                    627: \ifisJTeX
                    628: \ifisASCII
                    629:   \font\defgt=min10 scaled \magstep1
                    630: \else
                    631:   \jfont\defgt=dg10 scaled \magstep1
                    632: \fi
                    633: \else
                    634:   \let\defgt=\relax
                    635: \fi
                    636: \def\df{\let\tentt=\deftt\let\tenbf=\defbf
                    637:         \let\tengt=\defgt \bf\gt} % ntp
                    638:
                    639: % Fonts for indices and small examples.
                    640: % We actually use the slanted font rather than the italic,
                    641: % because texinfo normally uses the slanted fonts for that.
                    642: % Do not make many font distinctions in general in the index, since they
                    643: % aren't very useful.
                    644: \font\ninett=cmtt9
                    645: \font\indrm=cmr9
                    646: \font\indit=cmsl9
                    647: \let\indsl=\indit
                    648: \ifisJTeX
                    649: \ifisASCII
                    650:   \font\indmin=min9
                    651:   \font\indgt=goth9
                    652: \else
                    653:   \jfont\indmin=dm9
                    654:   \jfont\indgt=dg9
                    655: \fi
                    656: \else
                    657:   \let\indmin=\relax
                    658:   \let\indgt=\relax
                    659: \fi
                    660: \let\indmc=\indmin % ntp
                    661:
                    662: \let\indtt=\ninett
                    663: \let\indsf=\indrm
                    664: \let\indbf=\indrm
                    665: \let\indsc=\indrm
                    666: \font\indi=cmmi9
                    667: \font\indsy=cmsy9
                    668:
                    669: % Fonts for headings
                    670: \font\chaprm=cmbx10 scaled \magstep3
                    671: \font\chapit=cmti10 scaled \magstep3
                    672: \font\chapsl=cmsl10 scaled \magstep3
                    673: \font\chaptt=cmtt10 scaled \magstep3
                    674: \font\chapsf=cmss10 scaled \magstep3
                    675: %**
                    676: \ifisJTeX
                    677: \ifisASCII
                    678:   \font\chapmin=goth10 scaled \magstep3
                    679: \else
                    680:   \jfont\chapmin=dg10 scaled \magstep3
                    681: \fi
                    682: \else
                    683:   \let\chapmin=\relax
                    684: \fi
                    685: \let\chapgt=\chapmin
                    686:
                    687: %**
                    688: \let\chapbf=\chaprm
                    689: \font\chapsc=cmcsc10 scaled\magstep3
                    690: %\font\chapi=cmmi12 scaled \magstep2
                    691: \font\chapi=cmmi10 scaled \magstep3 % ntp
                    692: \font\chapsy=cmsy10 scaled \magstep3
                    693:
                    694: \font\secrm=cmbx10 scaled \magstep2
                    695: \font\secit=cmti10 scaled \magstep2
                    696: \font\secsl=cmsl10 scaled \magstep2
                    697: \font\sectt=cmtt10 scaled \magstep2
                    698: \font\secsf=cmss10 scaled \magstep2
                    699: \font\secbf=cmbx10 scaled \magstep2
                    700: %**
                    701: \ifisJTeX
                    702: \ifisASCII
                    703:   \font\secmin=goth10 scaled \magstep2
                    704: \else
                    705:   \jfont\secmin=dg10 scaled \magstep2
                    706: \fi
                    707: \else
                    708:   \let\secmin=\relax
                    709: \fi
                    710: \let\secgt=\secmin
                    711: %**
                    712: \font\secsc=cmcsc10 scaled\magstep2
                    713: %\font\seci=cmmi12 scaled \magstep1
                    714: \font\seci=cmmi10 scaled \magstep2
                    715: \font\secsy=cmsy10 scaled \magstep2
                    716:
                    717: % \font\ssecrm=cmbx10 scaled \magstep1    % This size an font looked bad.
                    718: % \font\ssecit=cmti10 scaled \magstep1    % The letters were too crowded.
                    719: % \font\ssecsl=cmsl10 scaled \magstep1
                    720: % \font\ssectt=cmtt10 scaled \magstep1
                    721: % \font\ssecsf=cmss10 scaled \magstep1
                    722:
                    723: %\font\ssecrm=cmb10 scaled 1315        % Note the use of cmb rather than cmbx.
                    724: %\font\ssecit=cmti10 scaled 1315       % Also, the size is a little larger than
                    725: %\font\ssecsl=cmsl10 scaled 1315       % being scaled magstep1.
                    726: %\font\ssectt=cmtt10 scaled 1315
                    727: %\font\ssecsf=cmss10 scaled 1315
                    728:
                    729:
                    730: %\font\ssecrm=cmbx12 scaled \magstephalf
                    731: %\font\ssecit=cmti12 scaled \magstephalf
                    732: %\font\ssecsl=cmsl12 scaled \magstephalf
                    733: %\font\ssectt=cmtt12 scaled \magstephalf
                    734: %\font\ssecsf=cmss12 scaled \magstephalf
                    735: \font\ssecrm=cmbx10 scaled \magstep1
                    736: \font\ssecit=cmti10 scaled \magstep1
                    737: \font\ssecsl=cmsl10 scaled \magstep1
                    738: \font\ssectt=cmtt10 scaled \magstep1
                    739: \font\ssecsf=cmss10 scaled \magstep1
                    740: \font\ssecsc=cmcsc10 scaled \magstep1
                    741: %\font\sseci=cmmi12 scaled \magstephalf
                    742: \font\sseci=cmmi10 scaled \magstep1
                    743: \font\ssecsy=cmsy10 scaled \magstep1
                    744: %**
                    745: \ifisJTeX
                    746: \ifisASCII
                    747:   \font\ssecmin=goth10 scaled \magstep1
                    748: \else
                    749:   \jfont\ssecmin=dg10 scaled \magstep1
                    750: \fi
                    751: \else
                    752:   \let\ssecmin=\relax
                    753: \fi
                    754: \let\ssecgt=\ssecmin
                    755: %**
                    756:
                    757: \let\ssecbf=\ssecrm
                    758:
                    759: % The smallcaps and symbol fonts should actually be scaled \magstep1.5,
                    760: % but that is not a standard magnification.
                    761:
                    762: % Fonts for title page:
                    763: %\font\titlerm = cmbx12 scaled \magstep3
                    764: \font\titlerm = cmbx10 scaled \magstep4
                    765: \ifisJTeX
                    766: \ifisASCII
                    767:   \font\titlemc=goth10 scaled \magstep4
                    768: \else
                    769:   \jfont\titlemc=dg10 scaled \magstep4
                    770: \fi
                    771: \else
                    772: \let\titlemc=\relax
                    773: \fi
                    774: \let\authorrm = \secrm
                    775: \ifisJTeX
                    776:   \let\authormc=\secmin
                    777: \else
                    778:   \let\authormc=\relax
                    779: \fi
                    780:
                    781: % In order for the font changes to affect most math symbols and letters,
                    782: % we have to define the \textfont of the standard families.  Since
                    783: % texinfo doesn't allow for producing subscripts and superscripts, we
                    784: % don't bother to reset \scriptfont and \scriptscriptfont (which would
                    785: % also require loading a lot more fonts).
                    786: %
                    787: \def\resetmathfonts{%
                    788:   \textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy
                    789:   \textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf
                    790:   \textfont\ttfam = \tentt \textfont\sffam = \tensf
                    791:   \ifisJTeX
                    792:   \ifisASCII
                    793:   \textfont\minfam = \tenmin \textfont\gtfam = \tengt % ntp
                    794:   \fi
                    795:   \fi
                    796: }
                    797:
                    798:
                    799: % The font-changing commands redefine the meanings of \tenSTYLE, instead
                    800: % of just \STYLE.  We do this so that font changes will continue to work
                    801: % in math mode, where it is the current \fam that is relevant in most
                    802: % cases, not the current.  Plain TeX does, for example,
                    803: % \def\bf{\fam=\bffam \tenbf}  By redefining \tenbf, we obviate the need
                    804: % to redefine \bf itself.
                    805: \def\textfonts{%
                    806:   \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
                    807:   \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
                    808:   \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
                    809:   \let\tenmin=\textmin \let\tengt=\textgt % ntp@isl.mei.co.jp
                    810:   \resetmathfonts}
                    811: \def\chapfonts{%
                    812:   \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
                    813:   \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
                    814:   \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
                    815:   \let\tenmin=\chapmin \let\tengt=\chapgt % ntp@isl.mei.co.jp
                    816:   \resetmathfonts}
                    817: \def\secfonts{%
                    818:   \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
                    819:   \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
                    820:   \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
                    821:   \let\tenmin=\secmin \let\tengt=\secgt % ntp@isl.mei.co.jp
                    822:   \resetmathfonts}
                    823: \def\subsecfonts{%
                    824:   \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
                    825:   \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
                    826:   \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
                    827:   \let\tenmin=\ssecmin \let\tengt=\ssecgt % ntp@isl.mei.co.jp
                    828:   \resetmathfonts}
                    829: \def\indexfonts{%
                    830:   \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl
                    831:   \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc
                    832:   \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy
                    833:   \let\tenmin=\indmin \let\tengt=\indgt % ntp@isl.mei.co.jp
                    834:   \resetmathfonts}
                    835:
                    836: % Set up the default fonts, so we can use them for creating boxes.
                    837: %
                    838: \textfonts
                    839:
                    840: % Count depth in font-changes, for error checks
                    841: \newcount\fontdepth \fontdepth=0
                    842:
                    843: % Fonts for short table of contents.
                    844: \font\shortcontrm=cmr12
                    845: %\font\shortcontbf=cmbx12
                    846: %\font\shortcontsl=cmsl12
                    847: \font\shortcontbf=cmbx10 scaled \magstephalf
                    848: \font\shortcontsl=cmsl10 scaled \magstephalf
                    849: %**
                    850: \ifisJTeX
                    851: \ifisASCII
                    852:   \font\shortcontmc=min10
                    853:   \font\shortcontgt=goth10
                    854: \else
                    855:   \jfont\shortcontmc=dm10
                    856:   \jfont\shortcontgt=dg10
                    857: \fi
                    858: \else
                    859:   \let\shortcontmc=\relax
                    860:   \let\shortcontgt=\relax
                    861: \fi
                    862: %**
                    863: %% Add scribe-like font environments, plus @l for inline lisp (usually sans
                    864: %% serif) and @ii for TeX italic
                    865:
                    866: % \smartitalic{ARG} outputs arg in italics, followed by an italic correction
                    867: % unless the following character is such as not to need one.
                    868: \def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi}
                    869: \def\smartitalic#1{{\sl #1}\futurelet\next\smartitalicx}
                    870:
                    871: \let\i=\smartitalic
                    872: \let\var=\smartitalic
                    873: \let\dfn=\smartitalic
                    874: \let\emph=\smartitalic
                    875: \let\cite=\smartitalic
                    876:
                    877: \def\b#1{{\bf #1}}
                    878: \let\strong=\b
                    879:
                    880: \def\t#1{{\tt \exhyphenpenalty=10000\rawbackslash \frenchspacing #1}\null}
                    881: \let\ttfont = \t
                    882: %\def\samp #1{`{\tt \rawbackslash \frenchspacing #1}'\null}
                    883: \def\samp #1{`\tclose{#1}'\null}
                    884: \def\key #1{{\tt \exhyphenpenalty=10000\uppercase{#1}}\null}
                    885: \def\ctrl #1{{\tt \rawbackslash \hat}#1}
                    886:
                    887: \let\file=\samp
                    888:
                    889: % @code is a modification of @t,
                    890: % which makes spaces the same size as normal in the surrounding text.
                    891: \newdimen\tclosesave
                    892: \newdimen\tcloserm
                    893: \def\tclose#1{{\rm\mc \tcloserm=\fontdimen2\font \tt \tclosesave=\fontdimen2\font
                    894: \fontdimen2\font=\tcloserm
                    895: % prevent breaking lines at hyphens.
                    896: \exhyphenpenalty=10000
                    897: \def\ {{\fontdimen2\font=\tclosesave{} }}%
                    898:  \rawbackslash \frenchspacing #1\fontdimen2\font=\tclosesave}\null}
                    899: \let\code=\tclose
                    900: %\let\exp=\tclose  %Was temporary
                    901:
                    902: % @kbd is like @code, except that if the argument is just one @key command,
                    903: % then @kbd has no effect.
                    904:
                    905: \def\xkey{\key}
                    906: \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
                    907: \ifx\one\xkey\ifx\threex\three \key{#2}%
                    908: \else\tclose{\look}\fi
                    909: \else\tclose{\look}\fi}
                    910:
                    911: % Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
                    912: % argument is to make the input look right: @dmn{pt} instead of
                    913: % @dmn{}pt.
                    914: %
                    915: \def\dmn#1{\thinspace #1}
                    916:
                    917: \def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
                    918:
                    919: \def\l#1{{\li #1}\null}                %
                    920:
                    921: \def\r#1{{\rm\mc #1}}          % roman font
                    922: % Use of \lowercase was suggested.
                    923: \def\sc#1{{\smallcaps#1}}      % smallcaps font
                    924: \def\ii#1{{\it #1}}            % italic font
                    925:
                    926: \message{page headings,}
                    927:
                    928: \newskip\titlepagetopglue \titlepagetopglue = 1.5in
                    929: \newskip\titlepagebottomglue \titlepagebottomglue = 2pc
                    930:
                    931: % First the title page.  Must do @settitle before @titlepage.
                    932: \def\titlefont#1{{\titlerm\titlemc #1}}
                    933:
                    934: \newtoks\realeverypar
                    935: \newif\ifseenauthor
                    936: \newif\iffinishedtitlepage
                    937:
                    938: \def\titlepage{\begingroup \parindent=0pt \textfonts
                    939:    \let\subtitlerm=\tenrm
                    940: %**
                    941:    \let\subtitlemc=\tenmin
                    942: %**
                    943: % I deinstalled the following change because \cmr12 is undefined.
                    944: % This change was not in the ChangeLog anyway.  --rms.
                    945: %   \let\subtitlerm=\cmr12
                    946: %   \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
                    947: %**
                    948:    \def\subtitlefont{\subtitlerm \subtitlemc
                    949:                      \normalbaselineskip = 13pt \normalbaselines}%
                    950: %**
                    951:    %
                    952: %   \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}%
                    953: %**
                    954:    \def\authorfont{\authorrm\authormc
                    955:                    \normalbaselineskip = 16pt \normalbaselines}%
                    956: %**
                    957:    %
                    958:    % Leave some space at the very top of the page.
                    959:    \vglue\titlepagetopglue
                    960:    %
                    961:    % Now you can print the title using @title.
                    962:    \def\title{\parsearg\titlezzz}%
                    963:    \def\titlezzz##1{\leftline{\titlefont{##1}}
                    964:                    % print a rule at the page bottom also.
                    965:                    \finishedtitlepagefalse
                    966:                    \vskip4pt \hrule height 4pt \vskip4pt}%
                    967:    % No rule at page bottom unless we print one at the top with @title.
                    968:    \finishedtitlepagetrue
                    969:    %
                    970:    % Now you can put text using @subtitle.
                    971:    \def\subtitle{\parsearg\subtitlezzz}%
                    972:    \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}%
                    973:    \let\subtext=\subtitle
                    974:    %
                    975:    % @author should come last, but may come many times.
                    976:    \def\author{\parsearg\authorzzz}%
                    977:    \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
                    978:       {\authorfont \leftline{##1}}}%
                    979:    %
                    980:    % Most title ``pages'' are actually two pages long, with space
                    981:    % at the top of the second.  We don't want the ragged left on the second.
                    982:    \let\oldpage = \page
                    983:    \def\page{%
                    984:       \iffinishedtitlepage\else
                    985:         \finishtitlepage
                    986:       \fi
                    987:       \oldpage
                    988:       \let\page = \oldpage
                    989:       \hbox{}}%
                    990: %   \def\page{\oldpage \hbox{}}
                    991: }
                    992:
                    993: \let\titlespec=\titlepage
                    994:
                    995: \def\Etitlepage{%
                    996:    \iffinishedtitlepage\else
                    997:       \finishtitlepage
                    998:    \fi
                    999:    % It is important to do the page break before ending the group,
                   1000:    % because the headline and footline are only empty inside the group.
                   1001:    % If we use the new definition of \page, we always get a blank page
                   1002:    % after the title page, which we certainly don't want.
                   1003:    \oldpage
                   1004:    \endgroup
                   1005:    \HEADINGSon
                   1006: }
                   1007:
                   1008: \let\Etitlespec=\Etitlepage
                   1009:
                   1010: \def\finishtitlepage{%
                   1011:    \vskip4pt \hrule height 2pt
                   1012:    \vskip\titlepagebottomglue
                   1013:    \finishedtitlepagetrue
                   1014: }
                   1015:
                   1016: %%% Set up page headings and footings.
                   1017:
                   1018: \let\thispage=\folio
                   1019:
                   1020: \newtoks \evenheadline    % Token sequence for heading line of even pages
                   1021: \newtoks \oddheadline     % Token sequence for heading line of odd pages
                   1022: \newtoks \evenfootline    % Token sequence for footing line of even pages
                   1023: \newtoks \oddfootline     % Token sequence for footing line of odd pages
                   1024:
                   1025: % Now make Tex use those variables
                   1026: \headline={{\textfonts\rm \mc \ifodd\pageno \the\oddheadline
                   1027:                             \else \the\evenheadline \fi}}
                   1028: \footline={{\textfonts\rm \mc \ifodd\pageno \the\oddfootline
                   1029:                             \else \the\evenfootline \fi}\HEADINGShook}
                   1030: \let\HEADINGShook=\relax
                   1031:
                   1032: % Commands to set those variables.
                   1033: % For example, this is what  @headings on  does
                   1034: % @evenheading @thistitle|@thispage|@thischapter
                   1035: % @oddheading @thischapter|@thispage|@thistitle
                   1036: % @evenfooting @thisfile||
                   1037: % @oddfooting ||@thisfile
                   1038:
                   1039: \def\evenheading{\parsearg\evenheadingxxx}
                   1040: \def\oddheading{\parsearg\oddheadingxxx}
                   1041: \def\everyheading{\parsearg\everyheadingxxx}
                   1042:
                   1043: \def\evenfooting{\parsearg\evenfootingxxx}
                   1044: \def\oddfooting{\parsearg\oddfootingxxx}
                   1045: \def\everyfooting{\parsearg\everyfootingxxx}
                   1046:
                   1047: {\catcode`\@=0 %
                   1048:
                   1049: \gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
                   1050: \gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
                   1051: \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
                   1052:
                   1053: \gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
                   1054: \gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
                   1055: \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
                   1056:
                   1057: \gdef\everyheadingxxx #1{\everyheadingyyy #1@|@|@|@|\finish}
                   1058: \gdef\everyheadingyyy #1@|#2@|#3@|#4\finish{%
                   1059: \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
                   1060: \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
                   1061:
                   1062: \gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
                   1063: \gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
                   1064: \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
                   1065:
                   1066: \gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
                   1067: \gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
                   1068: \global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
                   1069:
                   1070: \gdef\everyfootingxxx #1{\everyfootingyyy #1@|@|@|@|\finish}
                   1071: \gdef\everyfootingyyy #1@|#2@|#3@|#4\finish{%
                   1072: \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
                   1073: \global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
                   1074: %
                   1075: }% unbind the catcode of @.
                   1076:
                   1077: % @headings double     turns headings on for double-sided printing.
                   1078: % @headings single     turns headings on for single-sided printing.
                   1079: % @headings off                turns them off.
                   1080: % @headings on         same as @headings double, retained for compatibility.
                   1081: % @headings after      turns on double-sided headings after this page.
                   1082: % @headings doubleafter        turns on double-sided headings after this page.
                   1083: % @headings singleafter turns on single-sided headings after this page.
                   1084: % By default, they are off.
                   1085:
                   1086: \def\headings #1 {\csname HEADINGS#1\endcsname}
                   1087:
                   1088: \def\HEADINGSoff{
                   1089: \global\evenheadline={\hfil} \global\evenfootline={\hfil}
                   1090: \global\oddheadline={\hfil} \global\oddfootline={\hfil}}
                   1091: \HEADINGSoff
                   1092: % When we turn headings on, set the page number to 1.
                   1093: % For double-sided printing, put current file name in lower left corner,
                   1094: % chapter name on inside top of right hand pages, document
                   1095: % title on inside top of left hand pages, and page numbers on outside top
                   1096: % edge of all pages.
                   1097: \def\HEADINGSdouble{
                   1098: %\pagealignmacro
                   1099: \global\pageno=1
                   1100: \global\evenfootline={\hfil}
                   1101: \global\oddfootline={\hfil}
                   1102: \global\evenheadline={\line{\folio\hfil\thistitle}}
                   1103: \global\oddheadline={\line{\thischapter\hfil\folio}}
                   1104: }
                   1105: % For single-sided printing, chapter title goes across top left of page,
                   1106: % page number on top right.
                   1107: \def\HEADINGSsingle{
                   1108: %\pagealignmacro
                   1109: \global\pageno=1
                   1110: \global\evenfootline={\hfil}
                   1111: \global\oddfootline={\hfil}
                   1112: \global\evenheadline={\line{\thischapter\hfil\folio}}
                   1113: \global\oddheadline={\line{\thischapter\hfil\folio}}
                   1114: }
                   1115: \def\HEADINGSon{\HEADINGSdouble}
                   1116:
                   1117: \def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
                   1118: \let\HEADINGSdoubleafter=\HEADINGSafter
                   1119: \def\HEADINGSdoublex{%
                   1120: \global\evenfootline={\hfil}
                   1121: \global\oddfootline={\hfil}
                   1122: \global\evenheadline={\line{\folio\hfil\thistitle}}
                   1123: \global\oddheadline={\line{\thischapter\hfil\folio}}
                   1124: }
                   1125:
                   1126: \def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
                   1127: \def\HEADINGSsinglex{%
                   1128: \global\evenfootline={\hfil}
                   1129: \global\oddfootline={\hfil}
                   1130: \global\evenheadline={\line{\thischapter\hfil\folio}}
                   1131: \global\oddheadline={\line{\thischapter\hfil\folio}}
                   1132: }
                   1133:
                   1134: % Subroutines used in generating headings
                   1135: % Produces Day Month Year style of output.
                   1136: \def\today{\number\day\space
                   1137: \ifcase\month\or
                   1138: January\or February\or March\or April\or May\or June\or
                   1139: July\or August\or September\or October\or November\or December\fi
                   1140: \space\number\year}
                   1141:
                   1142: % Use this if you want the Month Day, Year style of output.
                   1143: %\def\today{\ifcase\month\or
                   1144: %January\or February\or March\or April\or May\or June\or
                   1145: %July\or August\or September\or October\or November\or December\fi
                   1146: %\space\number\day, \number\year}
                   1147:
                   1148: % @settitle line...  specifies the title of the document, for headings
                   1149: % It generates no output of its own
                   1150:
                   1151: \def\thistitle{No Title}
                   1152: \def\settitle{\parsearg\settitlezzz}
                   1153: \def\settitlezzz #1{\gdef\thistitle{#1}}
                   1154:
                   1155: \message{tables,}
                   1156:
                   1157: % @tabs -- simple alignment
                   1158:
                   1159: % These don't work.  For one thing, \+ is defined as outer.
                   1160: % So these macros cannot even be defined.
                   1161:
                   1162: %\def\tabs{\parsearg\tabszzz}
                   1163: %\def\tabszzz #1{\settabs\+#1\cr}
                   1164: %\def\tabline{\parsearg\tablinezzz}
                   1165: %\def\tablinezzz #1{\+#1\cr}
                   1166: %\def\&{&}
                   1167:
                   1168: % Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
                   1169:
                   1170: % default indentation of table text
                   1171: \newdimen\tableindent \tableindent=.8in
                   1172: % default indentation of @itemize and @enumerate text
                   1173: \newdimen\itemindent  \itemindent=.3in
                   1174: % margin between end of table item and start of table text.
                   1175: \newdimen\itemmargin  \itemmargin=.1in
                   1176:
                   1177: % used internally for \itemindent minus \itemmargin
                   1178: \newdimen\itemmax
                   1179:
                   1180: % Note @table, @vtable, and @vtable define @item, @itemx, etc., with
                   1181: % these defs.
                   1182: % They also define \itemindex
                   1183: % to index the item name in whatever manner is desired (perhaps none).
                   1184:
                   1185: \def\internalBitem{\smallbreak \parsearg\itemzzz}
                   1186: \def\internalBitemx{\par \parsearg\itemzzz}
                   1187:
                   1188: \def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
                   1189: \def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \par \parsearg\xitemzzz}
                   1190:
                   1191: \def\internalBkitem{\smallbreak \parsearg\kitemzzz}
                   1192: \def\internalBkitemx{\par \parsearg\kitemzzz}
                   1193:
                   1194: \def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
                   1195:                  \itemzzz {#1}}
                   1196:
                   1197: \def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}%
                   1198:                  \itemzzz {#1}}
                   1199:
                   1200: \def\itemzzz #1{\begingroup %
                   1201:   \advance\hsize by -\rightskip
                   1202:   \advance\hsize by -\tableindent
                   1203:   \setbox0=\hbox{\itemfont{#1}}%
                   1204:   \itemindex{#1}%
                   1205:   \nobreak % This prevents a break before @itemx.
                   1206:   %
                   1207:   % Be sure we are not still in the middle of a paragraph.
                   1208:   \parskip=0in
                   1209:   \par
                   1210:   %
                   1211:   % If the item text does not fit in the space we have, put it on a line
                   1212:   % by itself, and do not allow a page break either before or after that
                   1213:   % line.  We do not start a paragraph here because then if the next
                   1214:   % command is, e.g., @kindex, the whatsit would get put into the
                   1215:   % horizontal list on a line by itself, resulting in extra blank space.
                   1216:   \ifdim \wd0>\itemmax
                   1217:     \setbox0=\hbox{\hskip \leftskip \hskip -\tableindent \unhbox0}\box0
                   1218:     \nobreak
                   1219:   \else
                   1220:     % The item text fits into the space.  Start a paragraph, so that the
                   1221:     % following text (if any) will end up on the same line.  Since that
                   1222:     % text will be indented by \tableindent, we make the item text be in
                   1223:     % a zero-width box.
                   1224:     \noindent
                   1225:     \rlap{\hskip -\tableindent\box0}%
                   1226:   \fi
                   1227:   \endgroup
                   1228: }
                   1229:
                   1230: \def\item{\errmessage{@item while not in a table}}
                   1231: \def\itemx{\errmessage{@itemx while not in a table}}
                   1232: \def\kitem{\errmessage{@kitem while not in a table}}
                   1233: \def\kitemx{\errmessage{@kitemx while not in a table}}
                   1234: \def\xitem{\errmessage{@xitem while not in a table}}
                   1235: \def\xitemx{\errmessage{@xitemx while not in a table}}
                   1236:
                   1237: %% Contains a kludge to get @end[description] to work
                   1238: \def\description{\tablez{\dontindex}{1}{}{}{}{}}
                   1239:
                   1240: \def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
                   1241: {\obeylines\obeyspaces%
                   1242: \gdef\tablex #1^^M{%
                   1243: \tabley\dontindex#1        \endtabley}}
                   1244:
                   1245: \def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
                   1246: {\obeylines\obeyspaces%
                   1247: \gdef\ftablex #1^^M{%
                   1248: \tabley\fnitemindex#1        \endtabley
                   1249: \def\Eftable{\endgraf\endgroup\afterenvbreak}%
                   1250: \let\Etable=\relax}}
                   1251:
                   1252: \def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
                   1253: {\obeylines\obeyspaces%
                   1254: \gdef\vtablex #1^^M{%
                   1255: \tabley\vritemindex#1        \endtabley
                   1256: \def\Evtable{\endgraf\endgroup\afterenvbreak}%
                   1257: \let\Etable=\relax}}
                   1258:
                   1259: \def\dontindex #1{}
                   1260: \def\fnitemindex #1{\doind {fn}{\code{#1}}}%
                   1261: \def\vritemindex #1{\doind {vr}{\code{#1}}}%
                   1262:
                   1263: {\obeyspaces %
                   1264: \gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
                   1265: \tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
                   1266:
                   1267: \def\tablez #1#2#3#4#5#6{%
                   1268: \aboveenvbreak %
                   1269: \begingroup %
                   1270: \def\Edescription{\Etable}% Neccessary kludge.
                   1271: \let\itemindex=#1%
                   1272: \ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
                   1273: \ifnum 0#4>0 \tableindent=#4\mil \fi %
                   1274: \ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
                   1275: \def\itemfont{#2}%
                   1276: \itemmax=\tableindent %
                   1277: \advance \itemmax by -\itemmargin %
                   1278: \advance \leftskip by \tableindent %
                   1279: \exdentamount=\tableindent
                   1280: \parindent = 0pt
                   1281: \parskip = \smallskipamount
                   1282: \ifdim \parskip=0pt \parskip=2pt \fi%
                   1283: \def\Etable{\endgraf\endgroup\afterenvbreak}%
                   1284: \let\item = \internalBitem %
                   1285: \let\itemx = \internalBitemx %
                   1286: \let\kitem = \internalBkitem %
                   1287: \let\kitemx = \internalBkitemx %
                   1288: \let\xitem = \internalBxitem %
                   1289: \let\xitemx = \internalBxitemx %
                   1290: }
                   1291:
                   1292: % This is the counter used by @enumerate, which is really @itemize
                   1293:
                   1294: \newcount \itemno
                   1295:
                   1296: \def\itemize{\parsearg\itemizezzz}
                   1297:
                   1298: \def\itemizezzz #1{%
                   1299:   \begingroup % ended by the @end itemsize
                   1300:   \itemizey {#1}{\Eitemize}
                   1301: }
                   1302:
                   1303: \def\itemizey #1#2{%
                   1304: \aboveenvbreak %
                   1305: \itemmax=\itemindent %
                   1306: \advance \itemmax by -\itemmargin %
                   1307: \advance \leftskip by \itemindent %
                   1308: \exdentamount=\itemindent
                   1309: \parindent = 0pt %
                   1310: \parskip = \smallskipamount %
                   1311: \ifdim \parskip=0pt \parskip=2pt \fi%
                   1312: \def#2{\endgraf\endgroup\afterenvbreak}%
                   1313: \def\itemcontents{#1}%
                   1314: \let\item=\itemizeitem}
                   1315:
                   1316: \def\bullet{$\ptexbullet$}
                   1317: \def\minus{$-$}
                   1318:
                   1319: % Set sfcode to normal for the chars that usually have another value.
                   1320: % These are `.?!:;,'
                   1321: \def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000
                   1322:   \sfcode58=1000 \sfcode59=1000 \sfcode44=1000 }
                   1323:
                   1324: % \splitoff TOKENS\endmark defines \first to be the first token in
                   1325: % TOKENS, and \rest to be the remainder.
                   1326: %
                   1327: \def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
                   1328:
                   1329: % Allow an optional argument of an uppercase letter, lowercase letter,
                   1330: % or number, to specify the first label in the enumerated list.  No
                   1331: % argument is the same as `1'.
                   1332: %
                   1333: \def\enumerate{\parsearg\enumeratezzz}
                   1334: \def\enumeratezzz #1{\enumeratey #1  \endenumeratey}
                   1335: \def\enumeratey #1 #2\endenumeratey{%
                   1336:   \begingroup % ended by the @end enumerate
                   1337:   %
                   1338:   % If we were given no argument, pretend we were given `1'.
                   1339:   \def\thearg{#1}%
                   1340:   \ifx\thearg\empty \def\thearg{1}\fi
                   1341:   %
                   1342:   % Detect if the argument is a single token.  If so, it might be a
                   1343:   % letter.  Otherwise, the only valid thing it can be is a number.
                   1344:   % (We will always have one token, because of the test we just made.
                   1345:   % This is a good thing, since \splitoff doesn't work given nothing at
                   1346:   % all -- the first parameter is undelimited.)
                   1347:   \expandafter\splitoff\thearg\endmark
                   1348:   \ifx\rest\empty
                   1349:     % Only one token in the argument.  It could still be anything.
                   1350:     % A ``lowercase letter'' is one whose \lccode is nonzero.
                   1351:     % An ``uppercase letter'' is one whose \lccode is both nonzero, and
                   1352:     %   not equal to itself.
                   1353:     % Otherwise, we assume it's a number.
                   1354:     %
                   1355:     % We need the \relax at the end of the \ifnum lines to stop TeX from
                   1356:     % continuing to look for a <number>.
                   1357:     %
                   1358:     \ifnum\lccode\expandafter`\thearg=0\relax
                   1359:       \numericenumerate % a number (we hope)
                   1360:     \else
                   1361:       % It's a letter.
                   1362:       \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
                   1363:         \lowercaseenumerate % lowercase letter
                   1364:       \else
                   1365:         \uppercaseenumerate % uppercase letter
                   1366:       \fi
                   1367:     \fi
                   1368:   \else
                   1369:     % Multiple tokens in the argument.  We hope it's a number.
                   1370:     \numericenumerate
                   1371:   \fi
                   1372: }
                   1373:
                   1374: % An @enumerate whose labels are integers.  The starting integer is
                   1375: % given in \thearg.
                   1376: %
                   1377: \def\numericenumerate{%
                   1378:   \itemno = \thearg
                   1379:   \startenumeration{\the\itemno}%
                   1380: }
                   1381:
                   1382: % The starting (lowercase) letter is in \thearg.
                   1383: \def\lowercaseenumerate{%
                   1384:   \itemno = \expandafter`\thearg
                   1385:   \startenumeration{%
                   1386:     % Be sure we're not beyond the end of the alphabet.
                   1387:     \ifnum\itemno=0
                   1388:       \errmessage{No more lowercase letters in @enumerate; get a bigger
                   1389:                   alphabet}%
                   1390:     \fi
                   1391:     \char\lccode\itemno
                   1392:   }%
                   1393: }
                   1394:
                   1395: % The starting (uppercase) letter is in \thearg.
                   1396: \def\uppercaseenumerate{%
                   1397:   \itemno = \expandafter`\thearg
                   1398:   \startenumeration{%
                   1399:     % Be sure we're not beyond the end of the alphabet.
                   1400:     \ifnum\itemno=0
                   1401:       \errmessage{No more uppercase letters in @enumerate; get a bigger
                   1402:                   alphabet}
                   1403:     \fi
                   1404:     \char\uccode\itemno
                   1405:   }%
                   1406: }
                   1407:
                   1408: % Call itemizey, adding a period to the first argument and supplying the
                   1409: % common last two arguments.  Also subtract one from the initial value in
                   1410: % \itemno, since @item increments \itemno.
                   1411: %
                   1412: \def\startenumeration#1{%
                   1413:   \advance\itemno by -1
                   1414:   \itemizey{#1.}\Eenumerate\flushcr
                   1415: }
                   1416:
                   1417: % @alphaenumerate and @capsenumerate are abbreviations for giving an arg
                   1418: % to @enumerate.
                   1419: %
                   1420: \def\alphaenumerate{\enumerate{a}}
                   1421: \def\capsenumerate{\enumerate{A}}
                   1422: \def\Ealphaenumerate{\Eenumerate}
                   1423: \def\Ecapsenumerate{\Eenumerate}
                   1424:
                   1425: % Definition of @item while inside @itemize.
                   1426:
                   1427: \def\itemizeitem{%
                   1428: \advance\itemno by 1
                   1429: {\let\par=\endgraf \smallbreak}%
                   1430: \ifhmode \errmessage{\in hmode at itemizeitem}\fi
                   1431: {\parskip=0in \hskip 0pt
                   1432: \hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
                   1433: \vadjust{\penalty 1200}}%
                   1434: \flushcr}
                   1435:
                   1436: \message{indexing,}
                   1437: % Index generation facilities
                   1438:
                   1439: % Define \newwrite to be identical to plain tex's \newwrite
                   1440: % except not \outer, so it can be used within \newindex.
                   1441: {\catcode`\@=11
                   1442: \gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
                   1443:
                   1444: % \newindex {foo} defines an index named foo.
                   1445: % It automatically defines \fooindex such that
                   1446: % \fooindex ...rest of line... puts an entry in the index foo.
                   1447: % It also defines \fooindfile to be the number of the output channel for
                   1448: % the file that        accumulates this index.  The file's extension is foo.
                   1449: % The name of an index should be no more than 2 characters long
                   1450: % for the sake of vms.
                   1451:
                   1452: \def\newindex #1{
                   1453: \expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
                   1454: \openout \csname#1indfile\endcsname \jobname.#1        % Open the file
                   1455: \expandafter\xdef\csname#1index\endcsname{%    % Define \xxxindex
                   1456: \noexpand\doindex {#1}}
                   1457: }
                   1458:
                   1459: % @defindex foo  ==  \newindex{foo}
                   1460:
                   1461: \def\defindex{\parsearg\newindex}
                   1462:
                   1463: % Define @defcodeindex, like @defindex except put all entries in @code.
                   1464:
                   1465: \def\newcodeindex #1{
                   1466: \expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
                   1467: \openout \csname#1indfile\endcsname \jobname.#1        % Open the file
                   1468: \expandafter\xdef\csname#1index\endcsname{%    % Define \xxxindex
                   1469: \noexpand\docodeindex {#1}}
                   1470: }
                   1471:
                   1472: \def\defcodeindex{\parsearg\newcodeindex}
                   1473:
                   1474: % @synindex foo bar    makes index foo feed into index bar.
                   1475: % Do this instead of @defindex foo if you don't want it as a separate index.
                   1476: \def\synindex #1 #2 {%
                   1477: \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
                   1478: \expandafter\let\csname#1indfile\endcsname=\synindexfoo
                   1479: \expandafter\xdef\csname#1index\endcsname{%    % Define \xxxindex
                   1480: \noexpand\doindex {#2}}%
                   1481: }
                   1482:
                   1483: % @syncodeindex foo bar   similar, but put all entries made for index foo
                   1484: % inside @code.
                   1485: \def\syncodeindex #1 #2 {%
                   1486: \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
                   1487: \expandafter\let\csname#1indfile\endcsname=\synindexfoo
                   1488: \expandafter\xdef\csname#1index\endcsname{%    % Define \xxxindex
                   1489: \noexpand\docodeindex {#2}}%
                   1490: }
                   1491:
                   1492: % Define \doindex, the driver for all \fooindex macros.
                   1493: % Argument #1 is generated by the calling \fooindex macro,
                   1494: %  and it is "foo", the name of the index.
                   1495:
                   1496: % \doindex just uses \parsearg; it calls \doind for the actual work.
                   1497: % This is because \doind is more useful to call from other macros.
                   1498:
                   1499: % There is also \dosubind {index}{topic}{subtopic}
                   1500: % which makes an entry in a two-level index such as the operation index.
                   1501:
                   1502: \def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
                   1503: \def\singleindexer #1{\doind{\indexname}{#1}}
                   1504:
                   1505: %*********************************************
                   1506: %*** For the compat'y with texinfo.tex.ntt
                   1507: %*** jtexinfo patch by S.Tomura 89-Dec-7
                   1508: \def\Jempty{}
                   1509: \def\singleindexer #1{\singleindexerB#1[]\singleindexerA}
                   1510: \def\singleindexerB#1[#2]{\edef\Jone{#1}\edef\Jtwo{#2}%
                   1511: \ifx\Jempty\Jtwo\let\Jnext=\relax\let\singleindexerA=\singleindexerD%
                   1512: \else\let\Jnext=\singleindexerC\let\singleindexerA=\singleindexerE\fi%
                   1513: \Jnext}
                   1514: \def\singleindexerC#1[]{}
                   1515: \def\singleindexerD{\doind{\indexname}{\Jone}}
                   1516: \def\singleindexerE{\Jdoind{\indexname}{\Jone}{\Jtwo}}
                   1517: %**** end of patch
                   1518: %*********************************************
                   1519:
                   1520:
                   1521:
                   1522: % like the previous two, but they put @code around the argument.
                   1523: \def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
                   1524: \def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
                   1525:
                   1526: \def\indexdummies{%
                   1527: \def\_{{\realbackslash _}}%
                   1528: \def\w{\realbackslash w }%
                   1529: \def\bf{\realbackslash bf }%
                   1530: \def\rm{\realbackslash rm }%
                   1531: \def\sl{\realbackslash sl }%
                   1532: \def\sf{\realbackslash sf}%
                   1533: \def\tt{\realbackslash tt}%
                   1534: \def\gtr{\realbackslash gtr}%
                   1535: \def\less{\realbackslash less}%
                   1536: \def\hat{\realbackslash hat}%
                   1537: \def\char{\realbackslash char}%
                   1538: \def\TeX{\realbackslash TeX}%
                   1539: \def\dots{\realbackslash dots }%
                   1540: \def\copyright{\realbackslash copyright }%
                   1541: \def\tclose##1{\realbackslash tclose {##1}}%
                   1542: \def\code##1{\realbackslash code {##1}}%
                   1543: \def\samp##1{\realbackslash samp {##1}}%
                   1544: \def\t##1{\realbackslash r {##1}}%
                   1545: \def\r##1{\realbackslash r {##1}}%
                   1546: \def\i##1{\realbackslash i {##1}}%
                   1547: \def\b##1{\realbackslash b {##1}}%
                   1548: \def\cite##1{\realbackslash cite {##1}}%
                   1549: \def\key##1{\realbackslash key {##1}}%
                   1550: \def\file##1{\realbackslash file {##1}}%
                   1551: \def\var##1{\realbackslash var {##1}}%
                   1552: \def\kbd##1{\realbackslash kbd {##1}}%
                   1553: }
                   1554:
                   1555: % \indexnofonts no-ops all font-change commands.
                   1556: % This is used when outputting the strings to sort the index by.
                   1557: \def\indexdummyfont#1{#1}
                   1558: \def\indexdummytex{TeX}
                   1559: \def\indexdummydots{...}
                   1560:
                   1561: \def\indexnofonts{%
                   1562: \let\w=\indexdummyfont
                   1563: \let\t=\indexdummyfont
                   1564: \let\r=\indexdummyfont
                   1565: \let\i=\indexdummyfont
                   1566: \let\b=\indexdummyfont
                   1567: \let\emph=\indexdummyfont
                   1568: \let\strong=\indexdummyfont
                   1569: \let\cite=\indexdummyfont
                   1570: \let\sc=\indexdummyfont
                   1571: %Don't no-op \tt, since it isn't a user-level command
                   1572: % and is used in the definitions of the active chars like <, >, |...
                   1573: %\let\tt=\indexdummyfont
                   1574: \let\tclose=\indexdummyfont
                   1575: \let\code=\indexdummyfont
                   1576: \let\file=\indexdummyfont
                   1577: \let\samp=\indexdummyfont
                   1578: \let\kbd=\indexdummyfont
                   1579: \let\key=\indexdummyfont
                   1580: \let\var=\indexdummyfont
                   1581: \let\TeX=\indexdummytex
                   1582: \let\dots=\indexdummydots
                   1583: }
                   1584:
                   1585: % To define \realbackslash, we must make \ not be an escape.
                   1586: % We must first make another character (@) an escape
                   1587: % so we do not become unable to do a definition.
                   1588:
                   1589: {\catcode`\@=0 \catcode`\\=\other
                   1590: @gdef@realbackslash{\}}
                   1591:
                   1592: \let\indexbackslash=0  %overridden during \printindex.
                   1593:
                   1594: \def\doind #1#2{%
                   1595: {\count10=\lastpenalty %
                   1596: {\indexdummies % Must do this here, since \bf, etc expand at this stage
                   1597: \escapechar=`\\%
                   1598: {\let\folio=0% Expand all macros now EXCEPT \folio
                   1599: \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
                   1600: % so it will be output as is; and it will print as backslash in the indx.
                   1601: %
                   1602: % Now process the index-string once, with all font commands turned off,
                   1603: % to get the string to sort the index by.
                   1604: {\indexnofonts
                   1605: \xdef\temp1{#2}%
                   1606: }%
                   1607: % Now produce the complete index entry.  We process the index-string again,
                   1608: % this time with font commands expanded, to get what to print in the index.
                   1609: \edef\temp{%
                   1610: \write \csname#1indfile\endcsname{%
                   1611: \realbackslash entry {\temp1}{\folio}{#2}}}%
                   1612: \temp }%
                   1613: }\penalty\count10}}
                   1614:
                   1615: \def\dosubind #1#2#3{%
                   1616: {\count10=\lastpenalty %
                   1617: {\indexdummies % Must do this here, since \bf, etc expand at this stage
                   1618: \escapechar=`\\%
                   1619: {\let\folio=0%
                   1620: \def\rawbackslashxx{\indexbackslash}%
                   1621: %
                   1622: % Now process the index-string once, with all font commands turned off,
                   1623: % to get the string to sort the index by.
                   1624: {\indexnofonts
                   1625: \xdef\temp1{#2 #3}%
                   1626: }%
                   1627: % Now produce the complete index entry.  We process the index-string again,
                   1628: % this time with font commands expanded, to get what to print in the index.
                   1629: \edef\temp{%
                   1630: \write \csname#1indfile\endcsname{%
                   1631: \realbackslash entry {\temp1}{\folio}{#2}{#3}}}%
                   1632: \temp }%
                   1633: }\penalty\count10}}
                   1634:
                   1635: % The index entry written in the file actually looks like
                   1636: %  \entry {sortstring}{page}{topic}
                   1637: % or
                   1638: %  \entry {sortstring}{page}{topic}{subtopic}
                   1639: % The texindex program reads in these files and writes files
                   1640: % containing these kinds of lines:
                   1641: %  \initial {c}
                   1642: %     before the first topic whose initial is c
                   1643: %  \entry {topic}{pagelist}
                   1644: %     for a topic that is used without subtopics
                   1645: %  \primary {topic}
                   1646: %     for the beginning of a topic that is used with subtopics
                   1647: %  \secondary {subtopic}{pagelist}
                   1648: %     for each subtopic.
                   1649:
                   1650: % Define the user-accessible indexing commands
                   1651: % @findex, @vindex, @kindex, @cindex.
                   1652:
                   1653: \def\findex {\fnindex}
                   1654: \def\kindex {\kyindex}
                   1655: \def\cindex {\cpindex}
                   1656: \def\vindex {\vrindex}
                   1657: \def\tindex {\tpindex}
                   1658: \def\pindex {\pgindex}
                   1659:
                   1660: \def\cindexsub {\begingroup\obeylines\cindexsub}
                   1661: {\obeylines %
                   1662: \gdef\cindexsub "#1" #2^^M{\endgroup %
                   1663: \dosubind{cp}{#2}{#1}}}
                   1664:
                   1665:
                   1666: %*********************************************
                   1667: %*** jtexinfo patch  by S.Tomura 89-Nov-23
                   1668: %***
                   1669: \def\Jdoind #1#2#3{%
                   1670: {\indexdummies % Must do this here, since \bf, etc expand at this stage
                   1671: \count10=\lastpenalty %
                   1672: \escapechar=`\\%
                   1673: {\let\folio=0% Expand all macros now EXCEPT \folio
                   1674: \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
                   1675: % so it will be output as is; and it will print as backslash in the indx.
                   1676: %
                   1677: % Now process the index-string once, with all font commands turned off,
                   1678: % to get the string to sort the index by.
                   1679: {\indexnofonts
                   1680: \xdef\temp1{#3}%
                   1681: }%
                   1682: % Now produce the complete index entry.  We process the index-string again,
                   1683: % this time with font commands expanded, to get what to print in the index.
                   1684: \edef\temp{%
                   1685: \write \csname#1indfile\endcsname{%
                   1686: \realbackslash entry {\temp1}{\folio}{#2}}}%
                   1687: \temp }%
                   1688: \penalty\count10}}
                   1689: %*** end of patch
                   1690: %*********************************************
                   1691:
                   1692: % Define the macros used in formatting output of the sorted index material.
                   1693:
                   1694: % This is what you call to cause a particular index to get printed.
                   1695: % Write
                   1696: % @unnumbered Function Index
                   1697: % @printindex fn
                   1698:
                   1699: \def\printindex{\parsearg\doprintindex}
                   1700:
                   1701: \def\doprintindex#1{%
                   1702:   \tex
                   1703:   \dobreak \chapheadingskip {10000}
                   1704:   \catcode`\%=\other\catcode`\&=\other\catcode`\#=\other
                   1705:   \catcode`\$=\other\catcode`\_=\other
                   1706:   \catcode`\~=\other
                   1707:   \catcode`\@ =11% kusumi@isl.mei.co.jp
                   1708:   %
                   1709:   % The following don't help, since the chars were translated
                   1710:   % when the raw index was written, and their fonts were discarded
                   1711:   % due to \indexnofonts.
                   1712:   %\catcode`\"=\active
                   1713:   %\catcode`\^=\active
                   1714:   %\catcode`\_=\active
                   1715:   %\catcode`\|=\active
                   1716:   %\catcode`\<=\active
                   1717:   %\catcode`\>=\active
                   1718:   % %
                   1719:   \def\indexbackslash{\rawbackslashxx}
                   1720:   \indexfonts\rm\mc \tolerance=9500 \advance\baselineskip -1pt
                   1721:   \begindoublecolumns
                   1722:   %
                   1723:   % See if the index file exists and is nonempty.
                   1724:   \openin 1 \jobname.#1s
                   1725:   \ifeof 1
                   1726:     % \enddoublecolumns gets confused if there is no text in the index,
                   1727:     % and it loses the chapter title and the aux file entries for the
                   1728:     % index.  The easiest way to prevent this problem is to make sure
                   1729:     % there is some text.
                   1730:     (Index is nonexistent)
                   1731:     \else
                   1732:     %
                   1733:     % If the index file exists but is empty, then \openin leaves \ifeof
                   1734:     % false.  We have to make TeX try to read something from the file, so
                   1735:     % it can discover if there is anything in it.
                   1736:     \read 1 to \temp
                   1737:     \ifeof 1
                   1738:       (Index is empty)
                   1739:     \else
                   1740:       \input \jobname.#1s
                   1741:     \fi
                   1742:   \fi
                   1743:   \closein 1
                   1744:   \enddoublecolumns
                   1745:   \Etex
                   1746: }
                   1747:
                   1748: % These macros are used by the sorted index file itself.
                   1749: % Change them to control the appearance of the index.
                   1750:
                   1751: % Same as \bigskipamount except no shrink.
                   1752: % \balancecolumns gets confused if there is any shrink.
                   1753: \newskip\initialskipamount \initialskipamount 12pt plus4pt
                   1754:
                   1755: \def\initial #1{%
                   1756: {\let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
                   1757: \ifdim\lastskip<\initialskipamount
                   1758: \removelastskip \penalty-200 \vskip \initialskipamount\fi
                   1759: \line{\secbf\secgt#1\hfill}\kern 2pt\penalty10000}}
                   1760:
                   1761: \def\entry #1#2{\begingroup
                   1762:   \parfillskip=0in \parskip=0in \parindent=0in
                   1763:   %
                   1764:   % \hangindent is only relevant when the page number and the entry text
                   1765:   % don't fit on one line.  In that case, bob suggests starting the dots
                   1766:   % pretty far over on the line.
                   1767:   % \hangafter is reset to 1 at the start of each paragraph.
                   1768:   \hangindent=.75\hsize
                   1769:   \noindent
                   1770:   %
                   1771:   % Don't break the text of the index entry.
                   1772:   \hbox{#1}%
                   1773:   %
                   1774:   % If we must, put the page number on a line of its own, and fill out
                   1775:   % this line with blank space.  (The \hfil is overwhelmed with the
                   1776:   % fill leaders glue in \indexdotfill if the page number does fit.)
                   1777:   \hfil\penalty50
                   1778:   \null\nobreak\indexdotfill % Have leaders before the page number.
                   1779:   %
                   1780:   % The `\ ' here is removed by the implicit \unskip that TeX does as
                   1781:   % part of (the primitive) \par.  Without, a spurious underfull \hbox ensues.
                   1782:   \ #2% The page number ends the paragraph.
                   1783:   \par
                   1784: \endgroup}
                   1785:
                   1786: % Like \dotfill except takes at least 1 em.
                   1787: \def\indexdotfill{\cleaders
                   1788:   \hbox{$\mathsurround=0pt \mkern1.5mu . \mkern1.5mu$}\hskip 1em plus 1fill}
                   1789:
                   1790: \def\primary #1{\line{#1\hfil}}
                   1791:
                   1792: \newskip\secondaryindent \secondaryindent=0.5cm
                   1793:
                   1794: \def\secondary #1#2{
                   1795: {\parfillskip=0in \parskip=0in
                   1796: \hangindent =1in \hangafter=1
                   1797: \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill #2\par
                   1798: }}
                   1799:
                   1800: %% Define two-column mode, which is used in indexes.
                   1801: %% Adapted from the TeXBook, page 416
                   1802: \catcode `\@=11
                   1803:
                   1804: \newbox\partialpage
                   1805:
                   1806: \newdimen\doublecolumnhsize  \doublecolumnhsize = 3.11in
                   1807: \newdimen\doublecolumnvsize  \doublecolumnvsize = 19.1in
                   1808: \newdimen\availdimen@
                   1809:
                   1810: \def\begindoublecolumns{\begingroup
                   1811:   \output={\global\setbox\partialpage=
                   1812:     \vbox{\unvbox255\kern -\topskip \kern \baselineskip}}\eject
                   1813:   \output={\doublecolumnout}%
                   1814:   \hsize=\doublecolumnhsize \vsize=\doublecolumnvsize}
                   1815: \def\enddoublecolumns{\output={\balancecolumns}\eject
                   1816:   \endgroup \pagegoal=\vsize}
                   1817:
                   1818: \def\doublecolumnout{\splittopskip=\topskip \splitmaxdepth=\maxdepth
                   1819:   \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage
                   1820:   \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
                   1821:   \onepageout\pagesofar \unvbox255 \penalty\outputpenalty}
                   1822: \def\pagesofar{\unvbox\partialpage %
                   1823:   \hsize=\doublecolumnhsize % have to restore this since output routine
                   1824: %            changes it to set cropmarks (P. A. MacKay, 12 Nov. 1986)
                   1825:   \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}}
                   1826: \def\balancecolumns{%
                   1827: % Unset the glue.
                   1828:   \setbox255=\vbox{\unvbox255}
                   1829:   \dimen@=\ht255
                   1830:   \advance\dimen@ by\topskip \advance\dimen@ by-\baselineskip
                   1831:   \divide\dimen@ by2
                   1832:   \availdimen@=\pageheight \advance\availdimen@ by-\ht\partialpage
                   1833: % If the remaining data is too big for one page,
                   1834: % output one page normally, then work with what remains.
                   1835:   \ifdim \dimen@>\availdimen@
                   1836:    {
                   1837:      \splittopskip=\topskip \splitmaxdepth=\maxdepth
                   1838:      \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage
                   1839:      \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
                   1840:      \onepageout\pagesofar
                   1841:    }
                   1842: % Recompute size of what remains, in case we just output some of it.
                   1843:   \dimen@=\ht255
                   1844:   \advance\dimen@ by\topskip \advance\dimen@ by-\baselineskip
                   1845:   \divide\dimen@ by2
                   1846:   \fi
                   1847:   \setbox0=\vbox{\unvbox255}
                   1848:   \splittopskip=\topskip
                   1849:   {\vbadness=10000 \loop \global\setbox3=\copy0
                   1850:     \global\setbox1=\vsplit3 to\dimen@
                   1851:     \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt \repeat}
                   1852:   \setbox0=\vbox to\dimen@{\unvbox1}  \setbox2=\vbox to\dimen@{\unvbox3}
                   1853:   \pagesofar}
                   1854:
                   1855: \catcode `\@=\other
                   1856: \message{sectioning,}
                   1857: % Define chapters, sections, etc.
                   1858:
                   1859: \newcount \chapno
                   1860: \newcount \secno        \secno=0
                   1861: \newcount \subsecno     \subsecno=0
                   1862: \newcount \subsubsecno  \subsubsecno=0
                   1863:
                   1864: % This counter is funny since it counts through charcodes of letters A, B, ...
                   1865: \newcount \appendixno  \appendixno = `\@
                   1866: \def\appendixletter{\char\the\appendixno}
                   1867:
                   1868: \newwrite \contentsfile
                   1869: % This is called from \setfilename.
                   1870: \def\opencontents{\openout \contentsfile = \jobname.toc}
                   1871:
                   1872: % Each @chapter defines this as the name of the chapter.
                   1873: % page headings and footings can use it.  @section does likewise
                   1874:
                   1875: \def\thischapter{} \def\thissection{}
                   1876: \def\seccheck#1{\if \pageno<0 %
                   1877: \errmessage{@#1 not allowed after generating table of contents}\fi
                   1878: %
                   1879: }
                   1880:
                   1881: \def\chapternofonts{%
                   1882: \let\rawbackslash=\relax%
                   1883: \let\frenchspacing=\relax%
                   1884: \def\result{\realbackslash result}
                   1885: \def\equiv{\realbackslash equiv}
                   1886: \def\expansion{\realbackslash expansion}
                   1887: \def\print{\realbackslash print}
                   1888: \def\TeX{\realbackslash TeX}
                   1889: \def\dots{\realbackslash dots}
                   1890: \def\copyright{\realbackslash copyright}
                   1891: \def\tt{\realbackslash tt}
                   1892: \def\bf{\realbackslash bf }
                   1893: \def\w{\realbackslash w}
                   1894: \def\less{\realbackslash less}
                   1895: \def\gtr{\realbackslash gtr}
                   1896: \def\hat{\realbackslash hat}
                   1897: \def\char{\realbackslash char}
                   1898: \def\tclose##1{\realbackslash tclose {##1}}
                   1899: \def\code##1{\realbackslash code {##1}}
                   1900: \def\samp##1{\realbackslash samp {##1}}
                   1901: \def\r##1{\realbackslash r {##1}}
                   1902: \def\b##1{\realbackslash b {##1}}
                   1903: \def\key##1{\realbackslash key {##1}}
                   1904: \def\file##1{\realbackslash file {##1}}
                   1905: \def\kbd##1{\realbackslash kbd {##1}}
                   1906: % These are redefined because @smartitalic wouldn't work inside xdef.
                   1907: \def\i##1{\realbackslash i {##1}}
                   1908: \def\cite##1{\realbackslash cite {##1}}
                   1909: \def\var##1{\realbackslash var {##1}}
                   1910: \def\emph##1{\realbackslash emph {##1}}
                   1911: \def\dfn##1{\realbackslash dfn {##1}}
                   1912: }
                   1913:
                   1914: \def\thischaptername{No Chapter Title}
                   1915: \outer\def\chapter{\parsearg\chapterzzz}
                   1916: \def\chapterzzz #1{\seccheck{chapter}%
                   1917: \secno=0 \subsecno=0 \subsubsecno=0
                   1918: \global\advance \chapno by 1 \message{\strchapapp\the\chapno\strchaptail}%
                   1919: \chapmacro {#1}{\the\chapno}%
                   1920: \gdef\thissection{#1}%
                   1921: \gdef\thischaptername{#1}%
                   1922: % We don't substitute the actual chapter name into \thischapter
                   1923: % because we don't want its macros evaluated now.
                   1924: \xdef\thischapter{\strchapapp\the\chapno\strchaptail: \noexpand\thischaptername}%
                   1925: {\chapternofonts%
                   1926: \edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}%
                   1927: \escapechar=`\\%
                   1928: \write \contentsfile \temp  %
                   1929: \donoderef %
                   1930: \global\let\section = \numberedsec
                   1931: \global\let\subsection = \numberedsubsec
                   1932: \global\let\subsubsection = \numberedsubsubsec
                   1933: }}
                   1934:
                   1935: \outer\def\appendix{\parsearg\appendixzzz}
                   1936: \def\appendixzzz #1{\seccheck{appendix}%
                   1937: \secno=0 \subsecno=0 \subsubsecno=0
                   1938: \global\advance \appendixno by 1 \message{\strappendix\appendixletter}%
                   1939: \chapmacro {#1}{\strappendix\appendixletter}%
                   1940: \gdef\thissection{#1}%
                   1941: \gdef\thischaptername{#1}%
                   1942: \xdef\thischapter{\strappendix\appendixletter: \noexpand\thischaptername}%
                   1943: {\chapternofonts%
                   1944: \edef\temp{{\realbackslash chapentry
                   1945:   {#1}{Appendix \appendixletter}{\noexpand\folio}}}%
                   1946: \escapechar=`\\%
                   1947: \write \contentsfile \temp  %
                   1948: \appendixnoderef %
                   1949: \global\let\section = \appendixsec
                   1950: \global\let\subsection = \appendixsubsec
                   1951: \global\let\subsubsection = \appendixsubsubsec
                   1952: }}
                   1953:
                   1954: \outer\def\top{\parsearg\unnumberedzzz}
                   1955: \outer\def\unnumbered{\parsearg\unnumberedzzz}
                   1956: \def\unnumberedzzz #1{\seccheck{unnumbered}%
                   1957: \secno=0 \subsecno=0 \subsubsecno=0 \message{(#1)}
                   1958: \unnumbchapmacro {#1}%
                   1959: \gdef\thischapter{#1}\gdef\thissection{#1}%
                   1960: {\chapternofonts%
                   1961: \edef\temp{{\realbackslash unnumbchapentry {#1}{\noexpand\folio}}}%
                   1962: \escapechar=`\\%
                   1963: \write \contentsfile \temp  %
                   1964: \unnumbnoderef %
                   1965: \global\let\section = \unnumberedsec
                   1966: \global\let\subsection = \unnumberedsubsec
                   1967: \global\let\subsubsection = \unnumberedsubsubsec
                   1968: }}
                   1969:
                   1970: \outer\def\numberedsec{\parsearg\seczzz}
                   1971: \def\seczzz #1{\seccheck{section}%
                   1972: \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
                   1973: \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
                   1974: {\chapternofonts%
                   1975: \edef\temp{{\realbackslash secentry %
                   1976: {#1}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
                   1977: \escapechar=`\\%
                   1978: \write \contentsfile \temp %
                   1979: \donoderef %
                   1980: \penalty 10000 %
                   1981: }}
                   1982:
                   1983: \outer\def\appendixsection{\parsearg\appendixsectionzzz}
                   1984: \outer\def\appendixsec{\parsearg\appendixsectionzzz}
                   1985: \def\appendixsectionzzz #1{\seccheck{appendixsection}%
                   1986: \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
                   1987: \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
                   1988: {\chapternofonts%
                   1989: \edef\temp{{\realbackslash secentry %
                   1990: {#1}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
                   1991: \escapechar=`\\%
                   1992: \write \contentsfile \temp %
                   1993: \appendixnoderef %
                   1994: \penalty 10000 %
                   1995: }}
                   1996:
                   1997: \outer\def\unnumberedsec{\parsearg\unnumberedseczzz}
                   1998: \def\unnumberedseczzz #1{\seccheck{unnumberedsec}%
                   1999: \plainsecheading {#1}\gdef\thissection{#1}%
                   2000: {\chapternofonts%
                   2001: \edef\temp{{\realbackslash unnumbsecentry{#1}{\noexpand\folio}}}%
                   2002: \escapechar=`\\%
                   2003: \write \contentsfile \temp %
                   2004: \unnumbnoderef %
                   2005: \penalty 10000 %
                   2006: }}
                   2007:
                   2008: \outer\def\numberedsubsec{\parsearg\numberedsubseczzz}
                   2009: \def\numberedsubseczzz #1{\seccheck{subsection}%
                   2010: \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
                   2011: \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
                   2012: {\chapternofonts%
                   2013: \edef\temp{{\realbackslash subsecentry %
                   2014: {#1}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
                   2015: \escapechar=`\\%
                   2016: \write \contentsfile \temp %
                   2017: \donoderef %
                   2018: \penalty 10000 %
                   2019: }}
                   2020:
                   2021: \outer\def\appendixsubsec{\parsearg\appendixsubseczzz}
                   2022: \def\appendixsubseczzz #1{\seccheck{appendixsubsec}%
                   2023: \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
                   2024: \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
                   2025: {\chapternofonts%
                   2026: \edef\temp{{\realbackslash subsecentry %
                   2027: {#1}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
                   2028: \escapechar=`\\%
                   2029: \write \contentsfile \temp %
                   2030: \appendixnoderef %
                   2031: \penalty 10000 %
                   2032: }}
                   2033:
                   2034: \outer\def\unnumberedsubsec{\parsearg\unnumberedsubseczzz}
                   2035: \def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}%
                   2036: \plainsecheading {#1}\gdef\thissection{#1}%
                   2037: {\chapternofonts%
                   2038: \edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}%
                   2039: \escapechar=`\\%
                   2040: \write \contentsfile \temp %
                   2041: \unnumbnoderef %
                   2042: \penalty 10000 %
                   2043: }}
                   2044:
                   2045: \outer\def\numberedsubsubsec{\parsearg\numberedsubsubseczzz}
                   2046: \def\numberedsubsubseczzz #1{\seccheck{subsubsection}%
                   2047: \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
                   2048: \subsubsecheading {#1}
                   2049:   {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
                   2050: {\chapternofonts%
                   2051: \edef\temp{{\realbackslash subsubsecentry %
                   2052:   {#1}
                   2053:   {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}
                   2054:   {\noexpand\folio}}}%
                   2055: \escapechar=`\\%
                   2056: \write \contentsfile \temp %
                   2057: \donoderef %
                   2058: \penalty 10000 %
                   2059: }}
                   2060:
                   2061: \outer\def\appendixsubsubsec{\parsearg\appendixsubsubseczzz}
                   2062: \def\appendixsubsubseczzz #1{\seccheck{appendixsubsubsec}%
                   2063: \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
                   2064: \subsubsecheading {#1}
                   2065:   {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
                   2066: {\chapternofonts%
                   2067: \edef\temp{{\realbackslash subsubsecentry{#1}%
                   2068:   {\appendixletter}
                   2069:   {\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%
                   2070: \escapechar=`\\%
                   2071: \write \contentsfile \temp %
                   2072: \appendixnoderef %
                   2073: \penalty 10000 %
                   2074: }}
                   2075:
                   2076: \outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
                   2077: \def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}%
                   2078: \plainsecheading {#1}\gdef\thissection{#1}%
                   2079: {\chapternofonts%
                   2080: \edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}%
                   2081: \escapechar=`\\%
                   2082: \write \contentsfile \temp %
                   2083: \unnumbnoderef %
                   2084: \penalty 10000 %
                   2085: }}
                   2086:
                   2087: % These are variants which are not "outer", so they can appear in @ifinfo.
                   2088: % Actually, they should now be obsolete; ordinary section commands should work.
                   2089: \def\infotop{\parsearg\unnumberedzzz}
                   2090: \def\infounnumbered{\parsearg\unnumberedzzz}
                   2091: \def\infounnumberedsec{\parsearg\unnumberedseczzz}
                   2092: \def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
                   2093: \def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
                   2094:
                   2095: \def\infoappendix{\parsearg\appendixzzz}
                   2096: \def\infoappendixsec{\parsearg\appendixseczzz}
                   2097: \def\infoappendixsubsec{\parsearg\appendixsubseczzz}
                   2098: \def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
                   2099:
                   2100: \def\infochapter{\parsearg\chapterzzz}
                   2101: \def\infosection{\parsearg\sectionzzz}
                   2102: \def\infosubsection{\parsearg\subsectionzzz}
                   2103: \def\infosubsubsection{\parsearg\subsubsectionzzz}
                   2104:
                   2105: % These macros control what the section commands do, according
                   2106: % to what kind of chapter we are in (ordinary, appendix, or unnumbered).
                   2107: % Define them by default for a numbered chapter.
                   2108: \global\let\section = \numberedsec
                   2109: \global\let\subsection = \numberedsubsec
                   2110: \global\let\subsubsection = \numberedsubsubsec
                   2111:
                   2112: % Define @majorheading, @heading and @subheading
                   2113:
                   2114: % NOTE on use of \vbox for chapter headings, section headings, and
                   2115: % such:
                   2116: %      1) We use \vbox rather than the earlier \line to permit
                   2117: %         overlong headings to fold.
                   2118: %      2) \hyphenpenalty is set to 10000 because hyphenation in a
                   2119: %         heading is obnoxious; this forbids it.
                   2120: %       3) Likewise, headings look best if no \parindent is used, and
                   2121: %          if justification is not attempted.  Hence \raggedright.
                   2122:
                   2123:
                   2124: \def\majorheading{\parsearg\majorheadingzzz}
                   2125: \def\majorheadingzzz #1{%
                   2126: {\advance\chapheadingskip by 10pt \chapbreak }%
                   2127: {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                   2128:                   \parindent=0pt\raggedright
                   2129:                   \rm\mc #1\hfill}}\bigskip \par\penalty 200}
                   2130:
                   2131: \def\chapheading{\parsearg\chapheadingzzz}
                   2132: \def\chapheadingzzz #1{\chapbreak %
                   2133: {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                   2134:                   \parindent=0pt\raggedright
                   2135:                   \rm\mc #1\hfill}}\bigskip \par\penalty 200}
                   2136:
                   2137: \def\heading{\parsearg\secheadingi}
                   2138:
                   2139: \def\subheading{\parsearg\subsecheadingi}
                   2140:
                   2141: \def\subsubheading{\parsearg\subsubsecheadingi}
                   2142:
                   2143: % These macros generate a chapter, section, etc. heading only
                   2144: % (including whitespace, linebreaking, etc. around it),
                   2145: % given all the information in convenient, parsed form.
                   2146:
                   2147: %%% Args are the skip and penalty (usually negative)
                   2148: \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
                   2149:
                   2150: \def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
                   2151:
                   2152: %%% Define plain chapter starts, and page on/off switching for it
                   2153: % Parameter controlling skip before chapter headings (if needed)
                   2154:
                   2155: \newskip \chapheadingskip \chapheadingskip = 30pt plus 8pt minus 4pt
                   2156:
                   2157: \def\chapbreak{\dobreak \chapheadingskip {-4000}}
                   2158: \def\chappager{\par\vfill\supereject}
                   2159: \def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
                   2160:
                   2161: \def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
                   2162:
                   2163: \def\CHAPPAGoff{
                   2164: \global\let\pchapsepmacro=\chapbreak
                   2165: \global\let\pagealignmacro=\chappager}
                   2166:
                   2167: \def\CHAPPAGon{
                   2168: \global\let\pchapsepmacro=\chappager
                   2169: \global\let\pagealignmacro=\chappager
                   2170: \global\def\HEADINGSon{\HEADINGSsingle}}
                   2171:
                   2172: \def\CHAPPAGodd{
                   2173: \global\let\pchapsepmacro=\chapoddpage
                   2174: \global\let\pagealignmacro=\chapoddpage
                   2175: \global\def\HEADINGSon{\HEADINGSdouble}}
                   2176:
                   2177: \CHAPPAGon
                   2178:
                   2179: \def\CHAPFplain{
                   2180: \global\let\chapmacro=\chfplain
                   2181: \global\let\unnumbchapmacro=\unnchfplain}
                   2182:
                   2183: \def\chfplain #1#2{%
                   2184:   \pchapsepmacro
                   2185:   {%
                   2186:     \chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                   2187:                      \parindent=0pt\raggedright
                   2188:                      \rm\mc #2\enspace #1}%
                   2189:   }%
                   2190:   \bigskip
                   2191:   \penalty5000
                   2192: }
                   2193:
                   2194: \def\unnchfplain #1{%
                   2195: \pchapsepmacro %
                   2196: {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                   2197:                   \parindent=0pt\raggedright
                   2198:                   \rm\mc #1\hfill}}\bigskip \par\penalty 10000 %
                   2199: }
                   2200: \CHAPFplain % The default
                   2201:
                   2202: \def\unnchfopen #1{%
                   2203: \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                   2204:                        \parindent=0pt\raggedright
                   2205:                        \rm\mc #1\hfill}}\bigskip \par\penalty 10000 %
                   2206: }
                   2207:
                   2208: \def\chfopen #1#2{\chapoddpage {\chapfonts
                   2209: \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
                   2210: \par\penalty 5000 %
                   2211: }
                   2212:
                   2213: \def\CHAPFopen{
                   2214: \global\let\chapmacro=\chfopen
                   2215: \global\let\unnumbchapmacro=\unnchfopen}
                   2216:
                   2217: % Parameter controlling skip before section headings.
                   2218:
                   2219: \newskip \subsecheadingskip  \subsecheadingskip = 17pt plus 8pt minus 4pt
                   2220: \def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
                   2221:
                   2222: \newskip \secheadingskip  \secheadingskip = 21pt plus 8pt minus 4pt
                   2223: \def\secheadingbreak{\dobreak \secheadingskip {-1000}}
                   2224:
                   2225: % @paragraphindent  is defined for the Info formatting commands only.
                   2226: \let\paragraphindent=\comment
                   2227:
                   2228: % Section fonts are the base font at magstep2, which produces
                   2229: % a size a bit more than 14 points in the default situation.
                   2230:
                   2231: \def\secheading #1#2#3{\secheadingi {#2.#3\enspace #1}}
                   2232: \def\plainsecheading #1{\secheadingi {#1}}
                   2233: \def\secheadingi #1{{\advance \secheadingskip by \parskip %
                   2234: \secheadingbreak}%
                   2235: {\secfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                   2236:                  \parindent=0pt\raggedright
                   2237:                  \rm\mc #1\hfill}}%
                   2238: \ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 }
                   2239:
                   2240:
                   2241: % Subsection fonts are the base font at magstep1,
                   2242: % which produces a size of 12 points.
                   2243:
                   2244: \def\subsecheading #1#2#3#4{\subsecheadingi {#2.#3.#4\enspace #1}}
                   2245: \def\subsecheadingi #1{{\advance \subsecheadingskip by \parskip %
                   2246: \subsecheadingbreak}%
                   2247: {\subsecfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                   2248:                      \parindent=0pt\raggedright
                   2249:                      \rm\mc #1\hfill}}%
                   2250: \ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 }
                   2251:
                   2252: \def\subsubsecfonts{\subsecfonts} % Maybe this should change:
                   2253:                                  % Perhaps make sssec fonts scaled
                   2254:                                  % magstep half
                   2255: \def\subsubsecheading #1#2#3#4#5{\subsubsecheadingi {#2.#3.#4.#5\enspace #1}}
                   2256: \def\subsubsecheadingi #1{{\advance \subsecheadingskip by \parskip %
                   2257: \subsecheadingbreak}%
                   2258: {\subsubsecfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                   2259:                        \parindent=0pt\raggedright
                   2260:                        \rm\mc #1\hfill}}%
                   2261: \ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000}
                   2262:
                   2263:
                   2264: \message{toc printing,}
                   2265:
                   2266: % Finish up the main text and prepare to read what we've written
                   2267: % to \contentsfile.
                   2268:
                   2269: \newskip\contentsrightmargin \contentsrightmargin=1in
                   2270: \def\startcontents#1{%
                   2271:    \ifnum \pageno>0
                   2272:       \pageno = -1             % Request roman numbered pages.
                   2273:    \fi
                   2274:    \pagealignmacro
                   2275:    \immediate\closeout \contentsfile
                   2276:    % Don't need to put `Contents' or `Short Contents' in the headline.
                   2277:    % It is abundantly clear what they are.
                   2278:    \unnumbchapmacro{#1}\def\thischapter{}%
                   2279:    \begingroup                 % Set up to handle contents files properly.
                   2280:       \catcode`\\=0  \catcode`\{=1  \catcode`\}=2  \catcode`\@=11
                   2281:       \raggedbottom             % Worry more about breakpoints than the bottom.
                   2282:       \advance\hsize by -\contentsrightmargin % Don't use the full line length.
                   2283: }
                   2284:
                   2285:
                   2286: % Normal (long) toc.
                   2287: \outer\def\contents{%
                   2288:    \startcontents{\strtoc}%
                   2289:       \input \jobname.toc
                   2290:    \endgroup
                   2291:    \vfill \eject
                   2292: }
                   2293:
                   2294: % And just the chapters.
                   2295: \outer\def\summarycontents{%
                   2296:    \startcontents{\strstoc}%
                   2297:       %
                   2298:       \let\chapentry = \shortchapentry
                   2299:       \let\unnumbchapentry = \shortunnumberedentry
                   2300:       % We want a true roman here for the page numbers.
                   2301:       \secfonts
                   2302:       \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl
                   2303:       \let\mc=\shortcontmc \let\gt=\shortcontgt
                   2304:       \rm\mc
                   2305:       \advance\baselineskip by 1pt % Open it up a little.
                   2306:       \def\secentry ##1##2##3##4{}
                   2307:       \def\unnumbsecentry ##1##2{}
                   2308:       \def\subsecentry ##1##2##3##4##5{}
                   2309:       \def\unnumbsubsecentry ##1##2{}
                   2310:       \def\subsubsecentry ##1##2##3##4##5##6{}
                   2311:       \def\unnumbsubsubsecentry ##1##2{}
                   2312:       \input \jobname.toc
                   2313:    \endgroup
                   2314:    \vfill \eject
                   2315: }
                   2316: \let\shortcontents = \summarycontents
                   2317:
                   2318: % These macros generate individual entries in the table of contents.
                   2319: % The first argument is the chapter or section name.
                   2320: % The last argument is the page number.
                   2321: % The arguments in between are the chapter number, section number, ...
                   2322:
                   2323: % Chapter-level things, for both the long and short contents.
                   2324: \def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}}
                   2325:
                   2326: % See comments in \dochapentry re vbox and related settings
                   2327: \def\shortchapentry#1#2#3{%
                   2328:    \vbox{\hyphenpenalty=10000\tolerance=5000
                   2329:     \parindent=0pt\strut\raggedright
                   2330:     {#2\labelspace #1}\dotfill\doshortpageno{#3}}%
                   2331: }
                   2332:
                   2333: \def\unnumbchapentry#1#2{\dochapentry{#1}{#2}}
                   2334: \def\shortunnumberedentry#1#2{%
                   2335:    \vbox{\hyphenpenalty=10000\tolerance=5000
                   2336:     \parindent=0pt\strut\raggedright
                   2337:     #1\dotfill\doshortpageno{#2}}%
                   2338: }
                   2339:
                   2340: % Sections.
                   2341: \def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
                   2342: \def\unnumbsecentry#1#2{\dosecentry{#1}{#2}}
                   2343:
                   2344: % Subsections.
                   2345: \def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}}
                   2346: \def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}}
                   2347:
                   2348: % And subsubsections.
                   2349: \def\subsubsecentry#1#2#3#4#5#6{%
                   2350:   \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
                   2351: \def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}}
                   2352:
                   2353:
                   2354: % This parameter controls the indentation of the various levels.
                   2355: \newdimen\tocindent \tocindent = 3pc
                   2356:
                   2357: % Now for the actual typesetting. In all these, #1 is the text and #2 is the
                   2358: % page number.
                   2359: %
                   2360: % If the toc has to be broken over pages, we would want to be at chapters
                   2361: % if at all possible; hence the \penalty.
                   2362: \def\dochapentry#1#2{%
                   2363:    \penalty-300 \vskip\baselineskip
                   2364:    % This \vbox (and similar ones in dosecentry etc.) used to be a
                   2365:    % \line; changed to permit linebreaks for long headings.  See
                   2366:    % comments above \majorheading.  Here we also use \strut to
                   2367:    % keep the top end of the vbox from jamming up against the previous
                   2368:    % entry in the table of contents.
                   2369:    \vbox{\chapentryfonts
                   2370:      \hyphenpenalty=10000\tolerance=5000 % this line and next introduced
                   2371:      \parindent=0pt\strut\raggedright    % with \line -> \vbox change
                   2372:      #1\dotfill
                   2373:      \dopageno{#2}}%
                   2374:    \nobreak\vskip .25\baselineskip
                   2375: }
                   2376:
                   2377: \def\dosecentry#1#2{%
                   2378:    \vbox{\secentryfonts \leftskip=\tocindent
                   2379:     \hyphenpenalty=10000\tolerance=5000
                   2380:     \parindent=0pt\strut\raggedright #1\dotfill
                   2381:     \dopageno{#2}}%
                   2382: }
                   2383:
                   2384: \def\dosubsecentry#1#2{%
                   2385:    \vbox{\subsecentryfonts \leftskip=2\tocindent
                   2386:     \hyphenpenalty=10000\tolerance=5000
                   2387:     \parindent=0pt\strut\raggedright #1\dotfill
                   2388:     \dopageno{#2}}%
                   2389: }
                   2390:
                   2391: \def\dosubsubsecentry#1#2{%
                   2392:    \vbox{\subsubsecentryfonts \leftskip=3\tocindent
                   2393:     \hyphenpenalty=10000\tolerance=5000
                   2394:     \parindent=0pt\strut\raggedright #1\dotfill
                   2395:     \dopageno{#2}}%
                   2396: }
                   2397:
                   2398: % Space between chapter (or whatever) number and the title.
                   2399: \def\labelspace{\hskip1em \relax}
                   2400:
                   2401: \def\dopageno#1{{\rm\mc #1}}
                   2402: \def\doshortpageno#1{{\rm\mc #1}}
                   2403:
                   2404: \def\chapentryfonts{\secfonts \rm\mc}
                   2405: \def\secentryfonts{\textfonts}
                   2406: \let\subsecentryfonts = \textfonts
                   2407: \let\subsubsecentryfonts = \textfonts
                   2408:
                   2409:
                   2410: \message{environments,}
                   2411:
                   2412: % Since these characters are used in examples, it should be an even number of
                   2413: % \tt widths. Each \tt character is 1en, so two makes it 1em.
                   2414: % Furthermore, these definitions must come after we define our fonts.
                   2415: \newbox\dblarrowbox    \newbox\longdblarrowbox
                   2416: \newbox\pushcharbox    \newbox\bullbox
                   2417: \newbox\equivbox       \newbox\errorbox
                   2418:
                   2419: \let\ptexequiv = \equiv
                   2420:
                   2421: %{\tentt
                   2422: %\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil}
                   2423: %\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil}
                   2424: %\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil}
                   2425: %\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil}
                   2426: % Adapted from the manmac format (p.420 of TeXbook)
                   2427: %\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex
                   2428: %                                      depth .1ex\hfil}
                   2429: %}
                   2430:
                   2431: \def\point{$\star$}
                   2432:
                   2433: \def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
                   2434: \def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
                   2435: \def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
                   2436:
                   2437: \def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
                   2438:
                   2439: % Adapted from the TeXbook's \boxit.
                   2440: {\tentt \global\dimen0 = 3em}% Width of the box.
                   2441: \dimen2 = .55pt % Thickness of rules
                   2442: % The text. (`r' is open on the right, `e' somewhat less so on the left.)
                   2443: \setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
                   2444:
                   2445: \global\setbox\errorbox=\hbox to \dimen0{\hfil
                   2446:    \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
                   2447:    \advance\hsize by -2\dimen2 % Rules.
                   2448:    \vbox{
                   2449:       \hrule height\dimen2
                   2450:       \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
                   2451:          \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
                   2452:          \kern3pt\vrule width\dimen2}% Space to right.
                   2453:       \hrule height\dimen2}
                   2454:     \hfil}
                   2455:
                   2456: % The @error{} command.
                   2457: \def\error{\leavevmode\lower.7ex\copy\errorbox}
                   2458:
                   2459: % @tex ... @end tex    escapes into raw Tex temporarily.
                   2460: % One exception: @ is still an escape character, so that @end tex works.
                   2461: % But \@ or @@ will get a plain tex @ character.
                   2462:
                   2463: \def\tex{\begingroup
                   2464: \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
                   2465: \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
                   2466: \catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
                   2467: \catcode `\%=14
                   2468: \catcode 43=12
                   2469: \catcode`\"=12
                   2470: \catcode`\==12
                   2471: \catcode`\|=12
                   2472: \catcode`\<=12
                   2473: \catcode`\>=12
                   2474: \escapechar=`\\
                   2475: %
                   2476: \let\{=\ptexlbrace
                   2477: \let\}=\ptexrbrace
                   2478: \let\.=\ptexdot
                   2479: \let\*=\ptexstar
                   2480: \let\dots=\ptexdots
                   2481: \def\@{@}%
                   2482: \let\bullet=\ptexbullet
                   2483: \let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext \let\l=\ptexl
                   2484: \let\L=\ptexL
                   2485: %
                   2486: \let\Etex=\endgroup}
                   2487:
                   2488: % Define @lisp ... @endlisp.
                   2489: % @lisp does a \begingroup so it can rebind things,
                   2490: % including the definition of @endlisp (which normally is erroneous).
                   2491:
                   2492: % Amount to narrow the margins by for @lisp.
                   2493: \newskip\lispnarrowing \lispnarrowing=0.4in
                   2494:
                   2495: % This is the definition that ^M gets inside @lisp
                   2496: % phr: changed space to \null, to avoid overfull hbox problems.
                   2497: {\obeyspaces%
                   2498: \gdef\lisppar{\null\endgraf}}
                   2499:
                   2500: % Cause \obeyspaces to make each Space cause a word-separation
                   2501: % rather than the default which is that it acts punctuation.
                   2502: % This is because space in tt font looks funny.
                   2503: {\obeyspaces %
                   2504: \gdef\sepspaces{\def {\ }}}
                   2505:
                   2506: \newskip\aboveenvskipamount \aboveenvskipamount= 0pt
                   2507: \def\aboveenvbreak{{\advance\aboveenvskipamount by \parskip
                   2508: \endgraf \ifdim\lastskip<\aboveenvskipamount
                   2509: \removelastskip \penalty-50 \vskip\aboveenvskipamount \fi}}
                   2510:
                   2511: \def\afterenvbreak{\endgraf \ifdim\lastskip<\aboveenvskipamount
                   2512: \removelastskip \penalty-50 \vskip\aboveenvskipamount \fi}
                   2513:
                   2514: % \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins.
                   2515: \let\nonarrowing=\relax
                   2516:
                   2517: %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
                   2518: % \cartouche: draw rectangle w/rounded corners around argument
                   2519: \font\circle=lcircle10
                   2520: \newdimen\circthick
                   2521: \newdimen\cartouter\newdimen\cartinner
                   2522: \newskip\normbskip\newskip\normpskip\newskip\normlskip
                   2523: \circthick=\fontdimen8\circle
                   2524: %
                   2525: \def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
                   2526: \def\ctr{{\hskip 6pt\circle\char'010}}
                   2527: \def\cbl{{\circle\char'012\hskip -6pt}}
                   2528: \def\cbr{{\hskip 6pt\circle\char'011}}
                   2529: \def\carttop{\hbox to \cartouter{\hskip\lskip
                   2530:        \ctl\leaders\hrule height\circthick\hfil\ctr
                   2531:        \hskip\rskip}}
                   2532: \def\cartbot{\hbox to \cartouter{\hskip\lskip
                   2533:        \cbl\leaders\hrule height\circthick\hfil\cbr
                   2534:        \hskip\rskip}}
                   2535: %
                   2536: \newskip\lskip\newskip\rskip
                   2537:
                   2538: \long\def\cartouche{%
                   2539: \begingroup
                   2540:        \lskip=\leftskip \rskip=\rightskip
                   2541:        \leftskip=0pt\rightskip=0pt %we want these *outside*.
                   2542:        \cartinner=\hsize \advance\cartinner by-\lskip
                   2543:                          \advance\cartinner by-\rskip
                   2544:        \cartouter=\hsize
                   2545:        \advance\cartouter by 18pt % allow for 3pt kerns on either
                   2546: %                                   side, and for 6pt waste from
                   2547: %                                   each corner char
                   2548:        \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
                   2549:        % Flag to tell @lisp, etc., not to narrow margin.
                   2550:        \let\nonarrowing=\comment
                   2551:        \vbox\bgroup
                   2552:                \baselineskip=0pt\parskip=0pt\lineskip=0pt
                   2553:                \carttop
                   2554:                \hbox\bgroup
                   2555:                        \hskip\lskip
                   2556:                        \vrule\kern3pt
                   2557:                        \vbox\bgroup
                   2558:                                \hsize=\cartinner
                   2559:                                \kern3pt
                   2560:                                \begingroup
                   2561:                                        \baselineskip=\normbskip
                   2562:                                        \lineskip=\normlskip
                   2563:                                        \parskip=\normpskip
                   2564:                                        \vskip -\parskip
                   2565: \def\Ecartouche{%
                   2566:                                \endgroup
                   2567:                                \kern3pt
                   2568:                        \egroup
                   2569:                        \kern3pt\vrule
                   2570:                        \hskip\rskip
                   2571:                \egroup
                   2572:                \cartbot
                   2573:        \egroup
                   2574: \endgroup
                   2575: }}
                   2576:
                   2577: \def\lisp{\aboveenvbreak
                   2578: \begingroup\inENV % This group ends at the end of the @lisp body
                   2579: \hfuzz=12truept % Don't be fussy
                   2580: % Make spaces be word-separators rather than space tokens.
                   2581: \sepspaces %
                   2582: % Single space lines
                   2583: \singlespace %
                   2584: % The following causes blank lines not to be ignored
                   2585: % by adding a space to the end of each line.
                   2586: \let\par=\lisppar
                   2587: \def\Elisp{\endgroup\afterenvbreak}%
                   2588: \parskip=0pt
                   2589: % @cartouche defines \nonarrowing to inhibit narrowing
                   2590: % at next level down.
                   2591: \ifx\nonarrowing\relax
                   2592: \advance \leftskip by \lispnarrowing
                   2593: \exdentamount=\lispnarrowing
                   2594: \let\exdent=\nofillexdent
                   2595: \let\nonarrowing=\relax
                   2596: \fi
                   2597: \parindent=0pt
                   2598: \obeyspaces \obeylines \tt \rawbackslash
                   2599: \def\next##1{}\next}
                   2600:
                   2601:
                   2602: \let\example=\lisp
                   2603: \def\Eexample{\Elisp}
                   2604:
                   2605: \let\smallexample=\lisp
                   2606: \def\Esmallexample{\Elisp}
                   2607:
                   2608: % Macro for 9 pt. examples, necessary to print with 5" lines.
                   2609: % From Pavel@xerox.  This is not really used unless the
                   2610: % @smallbook command is given.
                   2611:
                   2612: \def\smalllispx{\aboveenvbreak\begingroup\inENV
                   2613: %                      This group ends at the end of the @lisp body
                   2614: \hfuzz=12truept % Don't be fussy
                   2615: % Make spaces be word-separators rather than space tokens.
                   2616: \sepspaces %
                   2617: % Single space lines
                   2618: \singlespace %
                   2619: % The following causes blank lines not to be ignored
                   2620: % by adding a space to the end of each line.
                   2621: \let\par=\lisppar
                   2622: \def\Esmalllisp{\endgroup\afterenvbreak}%
                   2623: %%%% Smaller baseline skip for small examples.
                   2624: \baselineskip 10pt
                   2625: \parskip=0pt
                   2626: % @cartouche defines \nonarrowing to inhibit narrowing
                   2627: % at next level down.
                   2628: \ifx\nonarrowing\relax
                   2629: \advance \leftskip by \lispnarrowing
                   2630: \exdentamount=\lispnarrowing
                   2631: \let\exdent=\nofillexdent
                   2632: \let\nonarrowing=\relax
                   2633: \fi
                   2634: \parindent=0pt
                   2635: \obeyspaces \obeylines \ninett \indexfonts \rawbackslash
                   2636: \def\next##1{}\next}
                   2637:
                   2638: % This is @display; same as @lisp except use roman font.
                   2639:
                   2640: \def\display{\begingroup\inENV %This group ends at the end of the @display body
                   2641: \aboveenvbreak
                   2642: % Make spaces be word-separators rather than space tokens.
                   2643: \sepspaces %
                   2644: % Single space lines
                   2645: \singlespace %
                   2646: % The following causes blank lines not to be ignored
                   2647: % by adding a space to the end of each line.
                   2648: \let\par=\lisppar
                   2649: \def\Edisplay{\endgroup\afterenvbreak}%
                   2650: \parskip=0pt
                   2651: % @cartouche defines \nonarrowing to inhibit narrowing
                   2652: % at next level down.
                   2653: \ifx\nonarrowing\relax
                   2654: \advance \leftskip by \lispnarrowing
                   2655: \exdentamount=\lispnarrowing
                   2656: \let\exdent=\nofillexdent
                   2657: \let\nonarrowing=\relax
                   2658: \fi
                   2659: \parindent=0pt
                   2660: \obeyspaces \obeylines
                   2661: \def\next##1{}\next}
                   2662:
                   2663: % This is @format; same as @lisp except use roman font and don't narrow margins
                   2664:
                   2665: \def\format{\begingroup\inENV %This group ends at the end of the @format body
                   2666: \aboveenvbreak
                   2667: % Make spaces be word-separators rather than space tokens.
                   2668: \sepspaces %
                   2669: \singlespace %
                   2670: % The following causes blank lines not to be ignored
                   2671: % by adding a space to the end of each line.
                   2672: \let\par=\lisppar
                   2673: \def\Eformat{\endgroup\afterenvbreak}
                   2674: \parskip=0pt \parindent=0pt
                   2675: \obeyspaces \obeylines
                   2676: \def\next##1{}\next}
                   2677:
                   2678: % @flushleft and @flushright
                   2679:
                   2680: \def\flushleft{%
                   2681: \begingroup\inENV %This group ends at the end of the @format body
                   2682: \aboveenvbreak
                   2683: % Make spaces be word-separators rather than space tokens.
                   2684: \sepspaces %
                   2685: % The following causes blank lines not to be ignored
                   2686: % by adding a space to the end of each line.
                   2687: % This also causes @ to work when the directive name
                   2688: % is terminated by end of line.
                   2689: \let\par=\lisppar
                   2690: \def\Eflushleft{\endgroup\afterenvbreak}%
                   2691: \parskip=0pt \parindent=0pt
                   2692: \obeyspaces \obeylines
                   2693: \def\next##1{}\next}
                   2694:
                   2695: \def\flushright{%
                   2696: \begingroup\inENV %This group ends at the end of the @format body
                   2697: \aboveenvbreak
                   2698: % Make spaces be word-separators rather than space tokens.
                   2699: \sepspaces %
                   2700: % The following causes blank lines not to be ignored
                   2701: % by adding a space to the end of each line.
                   2702: % This also causes @ to work when the directive name
                   2703: % is terminated by end of line.
                   2704: \let\par=\lisppar
                   2705: \def\Eflushright{\endgroup\afterenvbreak}%
                   2706: \parskip=0pt \parindent=0pt
                   2707: \advance \leftskip by 0pt plus 1fill
                   2708: \obeyspaces \obeylines
                   2709: \def\next##1{}\next}
                   2710:
                   2711: % @quotation - narrow the margins.
                   2712:
                   2713: \def\quotation{%
                   2714: \begingroup\inENV %This group ends at the end of the @quotation body
                   2715: {\parskip=0pt  % because we will skip by \parskip too, later
                   2716: \aboveenvbreak}%
                   2717: \singlespace
                   2718: \parindent=0pt
                   2719: \def\Equotation{\par\endgroup\afterenvbreak}%
                   2720: % @cartouche defines \nonarrowing to inhibit narrowing
                   2721: % at next level down.
                   2722: \ifx\nonarrowing\relax
                   2723: \advance \leftskip by \lispnarrowing
                   2724: \advance \rightskip by \lispnarrowing
                   2725: \exdentamount=\lispnarrowing
                   2726: \let\nonarrowing=\relax
                   2727: \fi}
                   2728:
                   2729: \message{defuns,}
                   2730: % Define formatter for defuns
                   2731: % First, allow user to change definition object font (\df) internally
                   2732: \def\setdeffont #1 {\csname DEF#1\endcsname}
                   2733:
                   2734: \newskip\defbodyindent \defbodyindent=.4in
                   2735: \newskip\defargsindent \defargsindent=50pt
                   2736: \newskip\deftypemargin \deftypemargin=12pt
                   2737: \newskip\deflastargmargin \deflastargmargin=18pt
                   2738:
                   2739: \newcount\parencount
                   2740: % define \functionparens, which makes ( and ) and & do special things.
                   2741: % \functionparens affects the group it is contained in.
                   2742: \def\activeparens{%
                   2743: \catcode`\(=\active \catcode`\)=\active \catcode`\&=\active
                   2744: \catcode`\[=\active \catcode`\]=\active}
                   2745: {\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
                   2746: \gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
                   2747: \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
                   2748:
                   2749: % Definitions of (, ) and & used in args for functions.
                   2750: % This is the definition of ( outside of all parentheses.
                   2751: \gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested %
                   2752: \global\advance\parencount by 1 }
                   2753: %
                   2754: % This is the definition of ( when already inside a level of parens.
                   2755: \gdef\opnested{\char`\(\global\advance\parencount by 1 }
                   2756: %
                   2757: \gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
                   2758: % also in that case restore the outer-level definition of (.
                   2759: \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
                   2760: \global\advance \parencount by -1 }
                   2761: % If we encounter &foo, then turn on ()-hacking afterwards
                   2762: \gdef\amprm#1 {{\rm\&#1}\let(=\oprm \let)=\clrm\ }
                   2763: %
                   2764: \gdef\normalparens{\boldbrax\let&=\ampnr}
                   2765: } % End of definition inside \activeparens
                   2766: %% These parens (in \boldbrax) actually are a little bolder than the
                   2767: %% contained text.  This is especially needed for [ and ]
                   2768: \def\opnr{{\sf\char`\(}} \def\clnr{{\sf\char`\)}} \def\ampnr{\&}
                   2769: \def\lbrb{{\bf\char`\[}} \def\rbrb{{\bf\char`\]}}
                   2770:
                   2771: % First, defname, which formats the header line itself.
                   2772: % #1 should be the function name.
                   2773: % #2 should be the type of definition, such as "Function".
                   2774:
                   2775: \def\defname #1#2{%
                   2776: % Get the values of \leftskip and \rightskip as they were
                   2777: % outside the @def...
                   2778: \dimen2=\leftskip
                   2779: \advance\dimen2 by -\defbodyindent
                   2780: \dimen3=\rightskip
                   2781: \advance\dimen3 by -\defbodyindent
                   2782: \noindent        %
                   2783: \setbox0=\hbox{\hskip \deflastargmargin{\rm\mc #2}\hskip \deftypemargin}%
                   2784: \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
                   2785: \dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations
                   2786: \parshape 2 0in \dimen0 \defargsindent \dimen1     %
                   2787: % Now output arg 2 ("Function" or some such)
                   2788: % ending at \deftypemargin from the right margin,
                   2789: % but stuck inside a box of width 0 so it does not interfere with linebreaking
                   2790: {% Adjust \hsize to exclude the ambient margins,
                   2791: % so that \rightline will obey them.
                   2792: \advance \hsize by -\dimen2 \advance \hsize by -\dimen3
                   2793: \rlap{\rightline{{\rm\mc #2}\hskip \deftypemargin}}}%
                   2794: % Make all lines underfull and no complaints:
                   2795: \tolerance=10000 \hbadness=10000
                   2796: \advance\leftskip by -\defbodyindent
                   2797: \exdentamount=\defbodyindent
                   2798: {\df #1}\enskip        % Generate function name
                   2799: }
                   2800:
                   2801: % Actually process the body of a definition
                   2802: % #1 should be the terminating control sequence, such as \Edefun.
                   2803: % #2 should be the "another name" control sequence, such as \defunx.
                   2804: % #3 should be the control sequence that actually processes the header,
                   2805: %    such as \defunheader.
                   2806:
                   2807: \def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
                   2808: \medbreak %
                   2809: % Define the end token that this defining construct specifies
                   2810: % so that it will exit this group.
                   2811: \def#1{\endgraf\endgroup\medbreak}%
                   2812: \def#2{\begingroup\obeylines\activeparens\spacesplit#3}%
                   2813: \parindent=0in
                   2814: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
                   2815: \exdentamount=\defbodyindent
                   2816: \begingroup %
                   2817: \catcode 61=\active %
                   2818: \obeylines\activeparens\spacesplit#3}
                   2819:
                   2820: \def\defmethparsebody #1#2#3#4 {\begingroup\inENV %
                   2821: \medbreak %
                   2822: % Define the end token that this defining construct specifies
                   2823: % so that it will exit this group.
                   2824: \def#1{\endgraf\endgroup\medbreak}%
                   2825: \def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}%
                   2826: \parindent=0in
                   2827: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
                   2828: \exdentamount=\defbodyindent
                   2829: \begingroup\obeylines\activeparens\spacesplit{#3{#4}}}
                   2830:
                   2831: \def\defopparsebody #1#2#3#4#5 {\begingroup\inENV %
                   2832: \medbreak %
                   2833: % Define the end token that this defining construct specifies
                   2834: % so that it will exit this group.
                   2835: \def#1{\endgraf\endgroup\medbreak}%
                   2836: \def#2##1 ##2 {\def#4{##1}%
                   2837: \begingroup\obeylines\activeparens\spacesplit{#3{##2}}}%
                   2838: \parindent=0in
                   2839: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
                   2840: \exdentamount=\defbodyindent
                   2841: \begingroup\obeylines\activeparens\spacesplit{#3{#5}}}
                   2842:
                   2843: % These parsing functions are similar to the preceding ones
                   2844: % except that they do not make parens into active characters.
                   2845: % These are used for "variables" since they have no arguments.
                   2846:
                   2847: \def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
                   2848: \medbreak %
                   2849: % Define the end token that this defining construct specifies
                   2850: % so that it will exit this group.
                   2851: \def#1{\endgraf\endgroup\medbreak}%
                   2852: \def#2{\begingroup\obeylines\spacesplit#3}%
                   2853: \parindent=0in
                   2854: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
                   2855: \exdentamount=\defbodyindent
                   2856: \begingroup %
                   2857: \catcode 61=\active %
                   2858: \obeylines\spacesplit#3}
                   2859:
                   2860: \def\defvrparsebody #1#2#3#4 {\begingroup\inENV %
                   2861: \medbreak %
                   2862: % Define the end token that this defining construct specifies
                   2863: % so that it will exit this group.
                   2864: \def#1{\endgraf\endgroup\medbreak}%
                   2865: \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}%
                   2866: \parindent=0in
                   2867: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
                   2868: \exdentamount=\defbodyindent
                   2869: \begingroup\obeylines\spacesplit{#3{#4}}}
                   2870:
                   2871: \def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV %
                   2872: \medbreak %
                   2873: % Define the end token that this defining construct specifies
                   2874: % so that it will exit this group.
                   2875: \def#1{\endgraf\endgroup\medbreak}%
                   2876: \def#2##1 ##2 {\def#4{##1}%
                   2877: \begingroup\obeylines\spacesplit{#3{##2}}}%
                   2878: \parindent=0in
                   2879: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
                   2880: \exdentamount=\defbodyindent
                   2881: \begingroup\obeylines\spacesplit{#3{#5}}}
                   2882:
                   2883: % Split up #2 at the first space token.
                   2884: % call #1 with two arguments:
                   2885: %  the first is all of #2 before the space token,
                   2886: %  the second is all of #2 after that space token.
                   2887: % If #2 contains no space token, all of it is passed as the first arg
                   2888: % and the second is passed as empty.
                   2889:
                   2890: {\obeylines
                   2891: \gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}%
                   2892: \long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{%
                   2893: \ifx\relax #3%
                   2894: #1{#2}{}\else #1{#2}{#3#4}\fi}}
                   2895:
                   2896: % So much for the things common to all kinds of definitions.
                   2897:
                   2898: % Define @defun.
                   2899:
                   2900: % First, define the processing that is wanted for arguments of \defun
                   2901: % Use this to expand the args and terminate the paragraph they make up
                   2902:
                   2903: \def\defunargs #1{\functionparens \sl
                   2904: % Expand, preventing hyphenation at `-' chars.
                   2905: % Note that groups don't affect changes in \hyphenchar.
                   2906: \hyphenchar\tensl=0
                   2907: #1%
                   2908: \hyphenchar\tensl=45
                   2909: \ifnum\parencount=0 \else \errmessage{unbalanced parens in @def arguments}\fi%
                   2910: \interlinepenalty=10000
                   2911: \advance\rightskip by 0pt plus 1fil
                   2912: \endgraf\penalty 10000\vskip -\parskip\penalty 10000%
                   2913: }
                   2914:
                   2915: \def\deftypefunargs #1{%
                   2916: % Expand, preventing hyphenation at `-' chars.
                   2917: % Note that groups don't affect changes in \hyphenchar.
                   2918: \functionparens
                   2919: \code{#1}%
                   2920: \interlinepenalty=10000
                   2921: \advance\rightskip by 0pt plus 1fil
                   2922: \endgraf\penalty 10000\vskip -\parskip\penalty 10000%
                   2923: }
                   2924:
                   2925: % Do complete processing of one @defun or @defunx line already parsed.
                   2926:
                   2927: % @deffn Command forward-char nchars
                   2928:
                   2929: \def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
                   2930:
                   2931: \def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
                   2932: \begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
                   2933: \catcode 61=\other % Turn off change made in \defparsebody
                   2934: }
                   2935:
                   2936: % @defun == @deffn Function
                   2937:
                   2938: \def\defun{\defparsebody\Edefun\defunx\defunheader}
                   2939:
                   2940: \def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
                   2941: \begingroup\defname {#1}{Function}%
                   2942: \defunargs {#2}\endgroup %
                   2943: \catcode 61=\other % Turn off change made in \defparsebody
                   2944: }
                   2945:
                   2946: % @deftypefun int foobar (int @var{foo}, float @var{bar})
                   2947:
                   2948: \def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader}
                   2949:
                   2950: % #1 is the data type.  #2 is the name and args.
                   2951: \def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax}
                   2952: % #1 is the data type, #2 the name, #3 the args.
                   2953: \def\deftypefunheaderx #1#2 #3\relax{%
                   2954: \doind {fn}{\code{#2}}% Make entry in function index
                   2955: \begingroup\defname {\code{#1} #2}{Function}%
                   2956: \deftypefunargs {#3}\endgroup %
                   2957: \catcode 61=\other % Turn off change made in \defparsebody
                   2958: }
                   2959:
                   2960: % @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
                   2961:
                   2962: \def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
                   2963:
                   2964: % #1 is the classification.  #2 is the data type.  #3 is the name and args.
                   2965: \def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
                   2966: % #1 is the classification, #2 the data type, #3 the name, #4 the args.
                   2967: \def\deftypefnheaderx #1#2#3 #4\relax{%
                   2968: \doind {fn}{\code{#3}}% Make entry in function index
                   2969: \begingroup\defname {\code{#2} #3}{#1}%
                   2970: \deftypefunargs {#4}\endgroup %
                   2971: \catcode 61=\other % Turn off change made in \defparsebody
                   2972: }
                   2973:
                   2974: % @defmac == @deffn Macro
                   2975:
                   2976: \def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
                   2977:
                   2978: \def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
                   2979: \begingroup\defname {#1}{Macro}%
                   2980: \defunargs {#2}\endgroup %
                   2981: \catcode 61=\other % Turn off change made in \defparsebody
                   2982: }
                   2983:
                   2984: % @defspec == @deffn Special Form
                   2985:
                   2986: \def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
                   2987:
                   2988: \def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
                   2989: \begingroup\defname {#1}{Special Form}%
                   2990: \defunargs {#2}\endgroup %
                   2991: \catcode 61=\other % Turn off change made in \defparsebody
                   2992: }
                   2993:
                   2994: % This definition is run if you use @defunx
                   2995: % anywhere other than immediately after a @defun or @defunx.
                   2996:
                   2997: \def\deffnx #1 {\errmessage{@deffnx in invalid context}}
                   2998: \def\defunx #1 {\errmessage{@defunx in invalid context}}
                   2999: \def\defmacx #1 {\errmessage{@defmacx in invalid context}}
                   3000: \def\defspecx #1 {\errmessage{@defspecx in invalid context}}
                   3001: \def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}}
                   3002: \def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}}
                   3003:
                   3004: % @defmethod, and so on
                   3005:
                   3006: % @defop {Funny Method} foo-class frobnicate argument
                   3007:
                   3008: \def\defop #1 {\def\defoptype{#1}%
                   3009: \defopparsebody\Edefop\defopx\defopheader\defoptype}
                   3010:
                   3011: \def\defopheader #1#2#3{%
                   3012: \dosubind {fn}{\code{#2}}{on #1}% Make entry in function index
                   3013: \begingroup\defname {#2}{\defoptype{} on #1}%
                   3014: \defunargs {#3}\endgroup %
                   3015: }
                   3016:
                   3017: % @defmethod == @defop Method
                   3018:
                   3019: \def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
                   3020:
                   3021: \def\defmethodheader #1#2#3{%
                   3022: \dosubind {fn}{\code{#2}}{on #1}% entry in function index
                   3023: \begingroup\defname {#2}{Method on #1}%
                   3024: \defunargs {#3}\endgroup %
                   3025: }
                   3026:
                   3027: % @defcv {Class Option} foo-class foo-flag
                   3028:
                   3029: \def\defcv #1 {\def\defcvtype{#1}%
                   3030: \defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
                   3031:
                   3032: \def\defcvarheader #1#2#3{%
                   3033: \dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
                   3034: \begingroup\defname {#2}{\defcvtype{} of #1}%
                   3035: \defvarargs {#3}\endgroup %
                   3036: }
                   3037:
                   3038: % @defivar == @defcv {Instance Variable}
                   3039:
                   3040: \def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
                   3041:
                   3042: \def\defivarheader #1#2#3{%
                   3043: \dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
                   3044: \begingroup\defname {#2}{Instance Variable of #1}%
                   3045: \defvarargs {#3}\endgroup %
                   3046: }
                   3047:
                   3048: % These definitions are run if you use @defmethodx, etc.,
                   3049: % anywhere other than immediately after a @defmethod, etc.
                   3050:
                   3051: \def\defopx #1 {\errmessage{@defopx in invalid context}}
                   3052: \def\defmethodx #1 {\errmessage{@defmethodx in invalid context}}
                   3053: \def\defcvx #1 {\errmessage{@defcvx in invalid context}}
                   3054: \def\defivarx #1 {\errmessage{@defivarx in invalid context}}
                   3055:
                   3056: % Now @defvar
                   3057:
                   3058: % First, define the processing that is wanted for arguments of @defvar.
                   3059: % This is actually simple: just print them in roman.
                   3060: % This must expand the args and terminate the paragraph they make up
                   3061: \def\defvarargs #1{\normalparens #1%
                   3062: \interlinepenalty=10000
                   3063: \endgraf\penalty 10000\vskip -\parskip\penalty 10000}
                   3064:
                   3065: % @defvr Counter foo-count
                   3066:
                   3067: \def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
                   3068:
                   3069: \def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
                   3070: \begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
                   3071:
                   3072: % @defvar == @defvr Variable
                   3073:
                   3074: \def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
                   3075:
                   3076: \def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
                   3077: \begingroup\defname {#1}{Variable}%
                   3078: \defvarargs {#2}\endgroup %
                   3079: }
                   3080:
                   3081: % @defopt == @defvr {User Option}
                   3082:
                   3083: \def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
                   3084:
                   3085: \def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
                   3086: \begingroup\defname {#1}{User Option}%
                   3087: \defvarargs {#2}\endgroup %
                   3088: }
                   3089:
                   3090: % @deftypevar int foobar
                   3091:
                   3092: \def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
                   3093:
                   3094: % #1 is the data type.  #2 is the name.
                   3095: \def\deftypevarheader #1#2{%
                   3096: \doind {vr}{\code{#2}}% Make entry in variables index
                   3097: \begingroup\defname {\code{#1} #2}{Variable}%
                   3098: \interlinepenalty=10000
                   3099: \endgraf\penalty 10000\vskip -\parskip\penalty 10000
                   3100: \endgroup}
                   3101:
                   3102: % @deftypevr {Global Flag} int enable
                   3103:
                   3104: \def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
                   3105:
                   3106: \def\deftypevrheader #1#2#3{\doind {vr}{\code{#3}}%
                   3107: \begingroup\defname {\code{#2} #3}{#1}
                   3108: \interlinepenalty=10000
                   3109: \endgraf\penalty 10000\vskip -\parskip\penalty 10000
                   3110: \endgroup}
                   3111:
                   3112: % This definition is run if you use @defvarx
                   3113: % anywhere other than immediately after a @defvar or @defvarx.
                   3114:
                   3115: \def\defvrx #1 {\errmessage{@defvrx in invalid context}}
                   3116: \def\defvarx #1 {\errmessage{@defvarx in invalid context}}
                   3117: \def\defoptx #1 {\errmessage{@defoptx in invalid context}}
                   3118: \def\deftypevarx #1 {\errmessage{@deftypevarx in invalid context}}
                   3119: \def\deftypevrx #1 {\errmessage{@deftypevrx in invalid context}}
                   3120:
                   3121: % Now define @deftp
                   3122: % Args are printed in bold, a slight difference from @defvar.
                   3123:
                   3124: \def\deftpargs #1{\bf \defvarargs{#1}}
                   3125:
                   3126: % @deftp Class window height width ...
                   3127:
                   3128: \def\deftp{\defvrparsebody\Edeftp\deftpx\deftpheader}
                   3129:
                   3130: \def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
                   3131: \begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
                   3132:
                   3133: % This definition is run if you use @deftpx, etc
                   3134: % anywhere other than immediately after a @deftp, etc.
                   3135:
                   3136: \def\deftpx #1 {\errmessage{@deftpx in invalid context}}
                   3137:
                   3138: \message{cross reference,}
                   3139: % Define cross-reference macros
                   3140: \newwrite \auxfile
                   3141:
                   3142: \newif\ifhavexrefs  % True if xref values are known.
                   3143: \newif\ifwarnedxrefs  % True if we warned once that they aren't known.
                   3144:
                   3145: % \setref{foo} defines a cross-reference point named foo.
                   3146:
                   3147: \def\setref#1{%
                   3148: %\dosetq{#1-title}{Ytitle}%
                   3149: \dosetq{#1-pg}{Ypagenumber}%
                   3150: \dosetq{#1-snt}{Ysectionnumberandtype}}
                   3151:
                   3152: \def\unnumbsetref#1{%
                   3153: %\dosetq{#1-title}{Ytitle}%
                   3154: \dosetq{#1-pg}{Ypagenumber}%
                   3155: \dosetq{#1-snt}{Ynothing}}
                   3156:
                   3157: \def\appendixsetref#1{%
                   3158: %\dosetq{#1-title}{Ytitle}%
                   3159: \dosetq{#1-pg}{Ypagenumber}%
                   3160: \dosetq{#1-snt}{Yappendixletterandtype}}
                   3161:
                   3162: % \xref, \pxref, and \ref generate cross-references to specified points.
                   3163: % For \xrefX, #1 is the node name, #2 the name of the Info
                   3164: % cross-reference, #3 the printed node name, #4 the name of the Info
                   3165: % file, #5 the name of the printed manual.  All but the node name can be
                   3166: % omitted.
                   3167: %
                   3168: \def\pxref#1{\strseeapp\xrefX[#1,,,,,,,]\strseetail}
                   3169: \def\xref#1{\strSeeapp\xrefX[#1,,,,,,,]\strseetail}
                   3170: \def\ref#1{\xrefX[#1,,,,,,,]}
                   3171: \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup%
                   3172: \def\printedmanual{\ignorespaces #5}%
                   3173: \def\printednodename{\ignorespaces #3}%
                   3174: %
                   3175: \setbox1=\hbox{\printedmanual}%
                   3176: \setbox0=\hbox{\printednodename}%
                   3177: \ifdim \wd0=0pt%
                   3178: \def\printednodename{\ignorespaces #1}%
                   3179: %%% Uncommment the following line to make the actual chapter or section title
                   3180: %%% appear inside the square brackets.
                   3181: %\def\printednodename{#1-title}%
                   3182: \fi%
                   3183: %
                   3184: %
                   3185: % If we use \unhbox0 and \unhbox1 to print the node names, TeX does
                   3186: % not insert empty discretionaries after hyphens, which means that it
                   3187: % will not find a line break at a hyphen in a node names.  Since some
                   3188: % manuals are best written with fairly long node names, containing
                   3189: % hyphens, this is a loss.  Therefore, we simply give the text of
                   3190: % the node name again, so it is as if TeX is seeing it for the first
                   3191: % time.
                   3192: \ifdim \wd1>0pt
                   3193: \strsecref
                   3194: \else%
                   3195: \turnoffactive%
                   3196: \refx{#1-snt}{} [\printednodename], \strpageapp\tie\refx{#1-pg}{}\strpagetail%
                   3197: \fi
                   3198: \endgroup}
                   3199:
                   3200: % \dosetq is the interface for calls from other macros
                   3201:
                   3202: % Use \turnoffactive so that punctuation chars such as underscore
                   3203: % work in node names.
                   3204: \def\dosetq #1#2{{\let\folio=0 \turnoffactive%
                   3205: \edef\next{\write\auxfile{\internalsetq {#1}{#2}}}%
                   3206: \next}}
                   3207:
                   3208: % \internalsetq {foo}{page} expands into
                   3209: % CHARACTERS 'xrdef {foo}{...expansion of \Ypage...}
                   3210: % When the aux file is read, ' is the escape character
                   3211:
                   3212: \def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}}
                   3213:
                   3214: % Things to be expanded by \internalsetq
                   3215:
                   3216: \def\Ypagenumber{\folio}
                   3217:
                   3218: \def\Ytitle{\thischapter}
                   3219:
                   3220: \def\Ynothing{}
                   3221:
                   3222: \def\Ysectionnumberandtype{%
                   3223: \ifnum\secno=0 \strchapapp\xreftie\the\chapno\strchaptail %
                   3224: \else \ifnum \subsecno=0 \strsecapp\xreftie\the\chapno.\the\secno\strsectail %
                   3225: \else \ifnum \subsubsecno=0 %
                   3226: \strsecapp\xreftie\the\chapno.\the\secno.\the\subsecno\strsectail %
                   3227: \else %
                   3228: \strsecapp\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno\strsectail %
                   3229: \fi \fi \fi }
                   3230:
                   3231: \def\Yappendixletterandtype{%
                   3232: \ifnum\secno=0 \strappendix\xreftie'char\the\appendixno{}%
                   3233: \else \ifnum \subsecno=0 \strsecapp\xreftie'char\the\appendixno.\the\secno\strsectail %
                   3234: \else \ifnum \subsubsecno=0 %
                   3235: \strsecapp\xreftie'char\the\appendixno.\the\secno.\the\subsecno\strsectail %
                   3236: \else %
                   3237: \strsecapp\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno\strsectail %
                   3238: \fi \fi \fi }
                   3239:
                   3240: \gdef\xreftie{'tie}
                   3241:
                   3242: % Use TeX 3.0's \inputlineno to get the line number, for better error
                   3243: % messages, but if we're using an old version of TeX, don't do anything.
                   3244: %
                   3245: \ifx\inputlineno\thisisundefined
                   3246:   \let\linenumber = \empty % Non-3.0.
                   3247: \else
                   3248:   \def\linenumber{\the\inputlineno:\space}
                   3249: \fi
                   3250:
                   3251: % Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
                   3252: % If its value is nonempty, SUFFIX is output afterward.
                   3253:
                   3254: \def\refx#1#2{%
                   3255:   \expandafter\ifx\csname X#1\endcsname\relax
                   3256:     % If not defined, say something at least.
                   3257:     $\langle$un\-de\-fined$\rangle$%
                   3258:     \ifhavexrefs
                   3259:       \message{\linenumber Undefined cross reference `#1'.}%
                   3260:     \else
                   3261:       \ifwarnedxrefs\else
                   3262:         \global\warnedxrefstrue
                   3263:         \message{Cross reference values unknown; you must run TeX again.}%
                   3264:       \fi
                   3265:     \fi
                   3266:   \else
                   3267:     % It's defined, so just use it.
                   3268:     \csname X#1\endcsname
                   3269:   \fi
                   3270:   #2% Output the suffix in any case.
                   3271: }
                   3272:
                   3273: % Read the last existing aux file, if any.  No error if none exists.
                   3274:
                   3275: % This is the macro invoked by entries in the aux file.
                   3276: \def\xrdef #1#2{
                   3277: {\catcode`\'=\other\expandafter \gdef \csname X#1\endcsname {#2}}}
                   3278:
                   3279: \def\readauxfile{%
                   3280: \begingroup
                   3281: \catcode `\^^@=\other
                   3282: \catcode `\&=\other
                   3283: \catcode `\=\other
                   3284: \catcode `\^^C=\other
                   3285: \catcode `\^^D=\other
                   3286: \catcode `\^^E=\other
                   3287: \catcode `\^^F=\other
                   3288: \catcode `\^^G=\other
                   3289: \catcode `\^^H=\other
                   3290: \catcode `\=\other
                   3291: \catcode `\^^L=\other
                   3292: \catcode `\=\other
                   3293: \catcode `\=\other
                   3294: \catcode `\=\other
                   3295: \catcode `\=\other
                   3296: \catcode `\=\other
                   3297: \catcode `\=\other
                   3298: \catcode `\=\other
                   3299: \catcode `\=\other
                   3300: \catcode `\=\other
                   3301: \catcode `\=\other
                   3302: \catcode `\=\other
                   3303: \catcode `\=\other
                   3304: \catcode 26=\other
                   3305: \catcode `\^^[=\other
                   3306: \catcode `\^^\=\other
                   3307: \catcode `\^^]=\other
                   3308: \catcode `\^^^=\other
                   3309: \catcode `\^^_=\other
                   3310: \catcode `\@=\other
                   3311: \catcode `\^=\other
                   3312: \catcode `\~=\other
                   3313: \catcode `\[=\other
                   3314: \catcode `\]=\other
                   3315: \catcode`\"=\other
                   3316: \catcode`\_=\other
                   3317: \catcode`\|=\other
                   3318: \catcode`\<=\other
                   3319: \catcode`\>=\other
                   3320: \catcode `\$=\other
                   3321: \catcode `\#=\other
                   3322: \catcode `\&=\other
                   3323: % the aux file uses ' as the escape.
                   3324: % Turn off \ as an escape so we do not lose on
                   3325: % entries which were dumped with control sequences in their names.
                   3326: % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
                   3327: % Reference to such entries still does not work the way one would wish,
                   3328: % but at least they do not bomb out when the aux file is read in.
                   3329: \catcode `\{=1 \catcode `\}=2
                   3330: \catcode `\%=\other
                   3331: \catcode `\'=0
                   3332: \catcode `\\=\other
                   3333: \openin 1 \jobname.aux
                   3334: \ifeof 1 \else \closein 1 \input \jobname.aux \global\havexrefstrue
                   3335: \fi
                   3336: % Open the new aux file.  Tex will close it automatically at exit.
                   3337: \openout \auxfile=\jobname.aux
                   3338: \endgroup}
                   3339:
                   3340:
                   3341: % Footnotes.
                   3342:
                   3343: \newcount \footnoteno
                   3344:
                   3345: % The trailing space in the following definition for supereject is
                   3346: % vital for proper filling; pages come out unaligned when you do a
                   3347: % pagealignmacro call if that space before the closing brace is
                   3348: % removed.
                   3349: \def\supereject{\par\penalty -20000\footnoteno =0 }
                   3350:
                   3351: % @footnotestyle is meaningful for info output only..
                   3352: \let\footnotestyle=\comment
                   3353:
                   3354: \let\ptexfootnote=\footnote
                   3355:
                   3356: {\catcode `\@=11
                   3357: \long\gdef\footnote #1{\global\advance \footnoteno by \@ne
                   3358: \unskip
                   3359: \edef\thisfootno{$^{\the\footnoteno}$}%
                   3360: \let\@sf\empty
                   3361: \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi
                   3362: \thisfootno\@sf \footnotezzz{#1}}
                   3363: % \parsearg\footnotezzz}
                   3364:
                   3365: \long\gdef\footnotezzz #1{\insert\footins{
                   3366: \interlinepenalty\interfootnotelinepenalty
                   3367: \splittopskip\ht\strutbox % top baseline for broken footnotes
                   3368: \splitmaxdepth\dp\strutbox \floatingpenalty\@MM
                   3369: \leftskip\z@skip \rightskip\z@skip \spaceskip\z@skip \xspaceskip\z@skip
                   3370: \footstrut\parindent=\defaultparindent\hang\textindent{\thisfootno}#1\strut}}
                   3371:
                   3372: }%end \catcode `\@=11
                   3373:
                   3374: % End of control word definitions.
                   3375:
                   3376: \message{and turning on texinfo input format.}
                   3377:
                   3378: \def\openindices{%
                   3379:    \newindex{cp}%
                   3380:    \newcodeindex{fn}%
                   3381:    \newcodeindex{vr}%
                   3382:    \newcodeindex{tp}%
                   3383:    \newcodeindex{ky}%
                   3384:    \newcodeindex{pg}%
                   3385: }
                   3386:
                   3387: % Set some numeric style parameters, for 8.5 x 11 format.
                   3388:
                   3389: %\hsize = 6.5in
                   3390: \newdimen\defaultparindent \defaultparindent = 15pt
                   3391: \parindent = \defaultparindent
                   3392: \parskip 18pt plus 1pt
                   3393: \baselineskip 15pt
                   3394: \advance\topskip by 1.2cm
                   3395:
                   3396: % Prevent underfull vbox error messages.
                   3397: \vbadness=10000
                   3398:
                   3399: % Following George Bush, just get rid of widows and orphans.
                   3400: \widowpenalty=10000
                   3401: \clubpenalty=10000
                   3402:
                   3403: % Use TeX 3.0's \emergencystretch to help line breaking, but if we're
                   3404: % using an old version of TeX, don't do anything.  We want the amount of
                   3405: % stretch added to depend on the line length, hence the dependence on
                   3406: % \hsize.  This makes it come to about 9pt for the 8.5x11 format.
                   3407: %
                   3408: \ifx\emergencystretch\thisisundefined \else
                   3409:   \emergencystretch = \hsize
                   3410:   \divide\emergencystretch by 45
                   3411: \fi
                   3412:
                   3413: % Use @smallbook to reset parameters for 7x9.5 format  (or else 7x9.25)
                   3414: \def\smallbook{
                   3415: \global\lispnarrowing = 0.3in
                   3416: \global\baselineskip 12pt
                   3417: \advance\topskip by -1cm
                   3418: \global\parskip 3pt plus 1pt
                   3419: \global\hsize = 5in
                   3420: \global\doublecolumnhsize=2.4in \global\doublecolumnvsize=15.0in
                   3421: \global\vsize=7.5in
                   3422: \global\tolerance=700
                   3423: \global\hfuzz=1pt
                   3424: \global\contentsrightmargin=0pt
                   3425:
                   3426: \global\pagewidth=\hsize
                   3427: \global\pageheight=\vsize
                   3428:
                   3429: \global\let\smalllisp=\smalllispx
                   3430: \global\let\smallexample=\smalllispx
                   3431: \global\def\Esmallexample{\Esmalllisp}
                   3432: }
                   3433:
                   3434: % Use @afourpaper to print on European A4 paper.
                   3435: \def\afourpaper{
                   3436: \global\tolerance=700
                   3437: \global\hfuzz=1pt
                   3438: \global\baselineskip=12pt
                   3439: \global\parskip 15pt plus 1pt
                   3440:
                   3441: \global\vsize= 53\baselineskip
                   3442: \advance\vsize by \topskip
                   3443: %\global\hsize=   5.85in     % A4 wide 10pt
                   3444: \global\hsize=  6.5in
                   3445: \global\outerhsize=\hsize
                   3446: \global\advance\outerhsize by 0.5in
                   3447: \global\outervsize=\vsize
                   3448: \global\advance\outervsize by 0.6in
                   3449: \global\doublecolumnhsize=\hsize
                   3450: \global\divide\doublecolumnhsize by 2
                   3451: \global\advance\doublecolumnhsize by -0.1in
                   3452: \global\doublecolumnvsize=\vsize
                   3453: \global\multiply\doublecolumnvsize by 2
                   3454: \global\advance\doublecolumnvsize by 0.1in
                   3455:
                   3456: \global\pagewidth=\hsize
                   3457: \global\pageheight=\vsize
                   3458: }
                   3459:
                   3460: \ifisJTeX % a4 is common alson in Japan
                   3461:  \afourpaper
                   3462:  \def\smallbook{\message{@smallbook is disabled in jtexinfo mode}}
                   3463:  \input texinfo-js.tex
                   3464: \else
                   3465:   \def\strappendix{Appendix }
                   3466:   \def\strchapapp{Chapter }
                   3467:   \def\strchaptail{}
                   3468:   \def\strsecapp{Section}
                   3469:   \def\strsectail{}
                   3470:   \def\strsecref{section ``\printednodename'' in \cite{\printedmanual}}
                   3471:   \def\strseeapp{see }
                   3472:   \def\strseetail{}
                   3473:   \def\strSeeapp{See }
                   3474:   \def\strSeetail{}
                   3475:   \def\strpageapp{page}
                   3476:   \def\strpagetail{}
                   3477:   \def\strtoc{Table Of Contents}
                   3478:   \def\strstoc{Short Contents}
                   3479: \fi
                   3480:
                   3481: %% For a final copy, take out the rectangles
                   3482: %% that mark overfull boxes (in case you have decided
                   3483: %% that the text looks ok even though it passes the margin).
                   3484: \def\finalout{\overfullrule=0pt}
                   3485:
                   3486: % Define macros to output various characters with catcode for normal text.
                   3487: \catcode`\"=\other
                   3488: \catcode`\~=\other
                   3489: \catcode`\^=\other
                   3490: \catcode`\_=\other
                   3491: \catcode`\|=\other
                   3492: \catcode`\<=\other
                   3493: \catcode`\>=\other
                   3494: \catcode`\+=\other
                   3495: \def\normaldoublequote{"}
                   3496: \def\normaltilde{~}
                   3497: \def\normalcaret{^}
                   3498: \def\normalunderscore{_}
                   3499: \def\normalverticalbar{|}
                   3500: \def\normalless{<}
                   3501: \def\normalgreater{>}
                   3502: \def\normalplus{+}
                   3503:
                   3504: % This macro is used to make a character print one way in ttfont
                   3505: % where it can probably just be output, and another way in other fonts,
                   3506: % where something hairier probably needs to be done.
                   3507: %
                   3508: % #1 is what to print if we are indeed using \tt; #2 is what to print
                   3509: % otherwise.  Since all the Computer Modern typewriter fonts have zero
                   3510: % interword stretch (and shrink), and it is reasonable to expect all
                   3511: % typewriter fonts to have this, we can check that font parameter.
                   3512: %
                   3513: \def\ifusingtt#1#2{\ifdim \fontdimen3\the\font=0pt #1\else #2\fi}
                   3514:
                   3515: % Turn off all special characters except @
                   3516: % (and those which the user can use as if they were ordinary).
                   3517: % Most of these we simply print from the \tt font, but for some, we can
                   3518: % use math or other variants that look better in normal text.
                   3519:
                   3520: \catcode`\"=\active
                   3521: \def\activedoublequote{{\tt \char '042}}
                   3522: \let"=\activedoublequote
                   3523: \catcode`\~=\active
                   3524: \def~{{\tt \char '176}}
                   3525: \chardef\hat=`\^
                   3526: \catcode`\^=\active
                   3527: \def^{{\tt \hat}}
                   3528:
                   3529: \catcode`\_=\active
                   3530: \def_{\ifusingtt\normalunderscore\_}
                   3531: % Subroutine for the previous macro.
                   3532: \def\_{\lvvmode \kern.06em \vbox{\hrule width.3em height.1ex}}
                   3533:
                   3534: % \lvvmode is equivalent in function to \leavevmode.
                   3535: % Using \leavevmode runs into trouble when written out to
                   3536: % an index file due to the expansion of \leavevmode into ``\unhbox
                   3537: % \voidb@x'' ---which looks to TeX like ``\unhbox \voidb\x'' due to our
                   3538: % magic tricks with @.
                   3539: \def\lvvmode{\vbox to 0pt{}}
                   3540:
                   3541: \catcode`\|=\active
                   3542: \def|{{\tt \char '174}}
                   3543: \chardef \less=`\<
                   3544: \catcode`\<=\active
                   3545: \def<{{\tt \less}}
                   3546: \chardef \gtr=`\>
                   3547: \catcode`\>=\active
                   3548: \def>{{\tt \gtr}}
                   3549: \catcode`\+=\active
                   3550: \def+{{\tt \char 43}}
                   3551: %\catcode 27=\active
                   3552: %\def^^[{$\diamondsuit$}
                   3553:
                   3554: % Used sometimes to turn off (effectively) the active characters
                   3555: % even after parsing them.
                   3556: \def\turnoffactive{\let"=\normaldoublequote
                   3557: \let~=\normaltilde
                   3558: \let^=\normalcaret
                   3559: \let_=\normalunderscore
                   3560: \let|=\normalverticalbar
                   3561: \let<=\normalless
                   3562: \let>=\normalgreater
                   3563: \let+=\normalplus}
                   3564:
                   3565: % Set up an active definition for =, but don't enable it most of the time.
                   3566: {\catcode`\==\active
                   3567: \global\def={{\tt \char 61}}}
                   3568:
                   3569: \catcode`\@=0
                   3570:
                   3571: % \rawbackslashxx output one backslash character in current font
                   3572: \global\chardef\rawbackslashxx=`\\
                   3573: %{\catcode`\\=\other
                   3574: %@gdef@rawbackslashxx{\}}
                   3575:
                   3576: % \rawbackslash redefines \ as input to do \rawbackslashxx.
                   3577: {\catcode`\\=\active
                   3578: @gdef@rawbackslash{@let\=@rawbackslashxx }}
                   3579:
                   3580: % \normalbackslash outputs one backslash in fixed width font.
                   3581: \def\normalbackslash{{\tt\rawbackslashxx}}
                   3582:
                   3583: % Say @foo, not \foo, in error messages.
                   3584: \escapechar=`\@
                   3585:
                   3586: % \catcode 17=0   % Define control-q
                   3587: \catcode`\\=\active
                   3588:
                   3589: % If a .fmt file is being used, we don't want the `\input texinfo' to show up.
                   3590: % That is what \eatinput is for; after that, the `\' should revert to printing
                   3591: % a backslash.
                   3592: %
                   3593: @gdef@eatinput input texinfo{@fixbackslash}
                   3594: @global@let\ = @eatinput
                   3595:
                   3596: % On the other hand, perhaps the file did not have a `\input texinfo'. Then
                   3597: % the first `\{ in the file would cause an error. This macro tries to fix
                   3598: % that, assuming it is called before the first `\' could plausibly occur.
                   3599: %
                   3600: @gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi}
                   3601:
                   3602: %% These look ok in all fonts, so just make them not special.  The @rm below
                   3603: %% makes sure that the current font starts out as the newly loaded cmr10
                   3604: @catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other
                   3605:
                   3606: @textfonts
                   3607: @rm
                   3608:
                   3609: @c Local variables:
                   3610: @c page-delimiter: "^\\\\message"
                   3611: @c End:

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>