Annotation of OpenXM/src/kan96xx/gc-4.14/Makefile.dj, Revision 1.1
1.1 ! maekawa 1: # Primary targets:
! 2: # gc.a - builds basic library
! 3: # libgc.a - builds library for use with g++ "-fgc-keyword" extension
! 4: # c++ - adds C++ interface to library
! 5: # cords - adds cords (heavyweight strings) to library
! 6: # test - prints porting information, then builds basic version of gc.a,
! 7: # and runs some tests of collector and cords. Does not add cords or
! 8: # c++ interface to gc.a
! 9: # cord/de$(EXE_SUFFIX) - builds dumb editor based on cords.
! 10: ABI_FLAG=
! 11: CC=gcc $(ABI_FLAG)
! 12: CXX=gxx $(ABI_FLAG)
! 13: AS=gcc -c -x assembler-with-cpp $(ABI_FLAG)
! 14: # The above doesn't work with gas, which doesn't run cpp.
! 15: # Define AS as `gcc -c -x assembler-with-cpp' instead.
! 16: # Under Irix 6, you will have to specify the ABI (-o32, -n32, or -64)
! 17: # if you use something other than the default ABI on your machine.
! 18:
! 19: # special defines for DJGPP
! 20: CXXLD=gxx $(ABI_FLAG)
! 21: EXE_SUFFIX=.exe
! 22:
! 23: CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DALL_INTERIOR_POINTERS -DNO_EXECUTE_PERMISSION -DSILENT
! 24:
! 25: # For dynamic library builds, it may be necessary to add flags to generate
! 26: # PIC code, e.g. -fPIC on Linux.
! 27:
! 28: # Setjmp_test may yield overly optimistic results when compiled
! 29: # without optimization.
! 30: # -DSILENT disables statistics printing, and improves performance.
! 31: # -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
! 32: # altered stubborn objects, at substantial performance cost.
! 33: # Use only for incremental collector debugging.
! 34: # -DFIND_LEAK causes the collector to assume that all inaccessible
! 35: # objects should have been explicitly deallocated, and reports exceptions.
! 36: # Finalization and the test program are not usable in this mode.
! 37: # -DSOLARIS_THREADS enables support for Solaris (thr_) threads.
! 38: # (Clients should also define SOLARIS_THREADS and then include
! 39: # gc.h before performing thr_ or dl* or GC_ operations.)
! 40: # Must also define -D_REENTRANT.
! 41: # -D_SOLARIS_PTHREADS enables support for Solaris pthreads.
! 42: # Define SOLARIS_THREADS as well.
! 43: # -DIRIX_THREADS enables support for Irix pthreads. See README.irix.
! 44: # -DLINUX_THREADS enables support for Xavier Leroy's Linux threads.
! 45: # see README.linux. -D_REENTRANT may also be required.
! 46: # -DALL_INTERIOR_POINTERS allows all pointers to the interior
! 47: # of objects to be recognized. (See gc_priv.h for consequences.)
! 48: # -DSMALL_CONFIG tries to tune the collector for small heap sizes,
! 49: # usually causing it to use less space in such situations.
! 50: # Incremental collection no longer works in this case.
! 51: # -DLARGE_CONFIG tunes the collector for unusually large heaps.
! 52: # Necessary for heaps larger than about 500 MB on most machines.
! 53: # Recommended for heaps larger than about 64 MB.
! 54: # -DDONT_ADD_BYTE_AT_END is meaningful only with
! 55: # -DALL_INTERIOR_POINTERS. Normally -DALL_INTERIOR_POINTERS
! 56: # causes all objects to be padded so that pointers just past the end of
! 57: # an object can be recognized. This can be expensive. (The padding
! 58: # is normally more than one byte due to alignment constraints.)
! 59: # -DDONT_ADD_BYTE_AT_END disables the padding.
! 60: # -DNO_SIGNALS does not disable signals during critical parts of
! 61: # the GC process. This is no less correct than many malloc
! 62: # implementations, and it sometimes has a significant performance
! 63: # impact. However, it is dangerous for many not-quite-ANSI C
! 64: # programs that call things like printf in asynchronous signal handlers.
! 65: # -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not
! 66: # have execute permission, i.e. it may be impossible to execute
! 67: # code from the heap. Currently this only affects the incremental
! 68: # collector on UNIX machines. It may greatly improve its performance,
! 69: # since this may avoid some expensive cache synchronization.
! 70: # -DOPERATOR_NEW_ARRAY declares that the C++ compiler supports the
! 71: # new syntax "operator new[]" for allocating and deleting arrays.
! 72: # See gc_cpp.h for details. No effect on the C part of the collector.
! 73: # This is defined implicitly in a few environments.
! 74: # -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be defined
! 75: # as aliases for X, GC_realloc, and GC_free, respectively.
! 76: # Calloc is redefined in terms of the new malloc. X should
! 77: # be either GC_malloc or GC_malloc_uncollectable.
! 78: # The former is occasionally useful for working around leaks in code
! 79: # you don't want to (or can't) look at. It may not work for
! 80: # existing code, but it often does. Neither works on all platforms,
! 81: # since some ports use malloc or calloc to obtain system memory.
! 82: # (Probably works for UNIX, and win32.)
! 83: # -DIGNORE_FREE turns calls to free into a noop. Only useful with
! 84: # -DREDIRECT_MALLOC.
! 85: # -DNO_DEBUGGING removes GC_dump and the debugging routines it calls.
! 86: # Reduces code size slightly at the expense of debuggability.
! 87: # -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of
! 88: # order by specifying a nonstandard finalization mark procedure (see
! 89: # finalize.c). Objects reachable from finalizable objects will be marked
! 90: # in a sepearte postpass, and hence their memory won't be reclaimed.
! 91: # Not recommended unless you are implementing a language that specifies
! 92: # these semantics.
! 93: # -DFINALIZE_ON_DEMAND causes finalizers to be run only in response
! 94: # to explicit GC_invoke_finalizers() calls.
! 95: # -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.
! 96: # This is useful if either the vendor malloc implementation is poor,
! 97: # or if REDIRECT_MALLOC is used.
! 98: # -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly
! 99: # sets the heap block size. Each heap block is devoted to a single size and
! 100: # kind of object. For the incremental collector it makes sense to match
! 101: # the most likely page size. Otherwise large values result in more
! 102: # fragmentation, but generally better performance for large heaps.
! 103: # -DUSE_MMAP use MMAP instead of sbrk to get new memory.
! 104: # Works for Solaris and Irix.
! 105: # -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than
! 106: # GC_scratch_alloc() to get stack memory.
! 107: # -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever
! 108: # the garbage collector detects a value that looks almost, but not quite,
! 109: # like a pointer, print both the address containing the value, and the
! 110: # value of the near-bogus-pointer. Can be used to identifiy regions of
! 111: # memory that are likely to contribute misidentified pointers.
! 112: # -DOLD_BLOCK_ALLOC Use the old, possibly faster, large block
! 113: # allocation strategy. The new strategy tries harder to minimize
! 114: # fragmentation, sometimes at the expense of spending more time in the
! 115: # large block allocator and/or collecting more frequently.
! 116: # If you expect the allocator to promtly use an explicitly expanded
! 117: # heap, this is highly recommended.
! 118: #
! 119:
! 120:
! 121:
! 122: LIBGC_CFLAGS= -O -DNO_SIGNALS -DSILENT \
! 123: -DREDIRECT_MALLOC=GC_malloc_uncollectable \
! 124: -DDONT_ADD_BYTE_AT_END -DALL_INTERIOR_POINTERS
! 125: # Flags for building libgc.a -- the last two are required.
! 126:
! 127: CXXFLAGS= $(CFLAGS) -DOPERATOR_NEW_ARRAY
! 128: AR= ar
! 129: RANLIB= ranlib
! 130:
! 131:
! 132: # Redefining srcdir allows object code for the nonPCR version of the collector
! 133: # to be generated in different directories. In this case, the destination directory
! 134: # should contain a copy of the original include directory.
! 135: srcdir = .
! 136: VPATH = $(srcdir)
! 137:
! 138: OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o
! 139:
! 140: CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c
! 141:
! 142: CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c cord/cord.h cord/ec.h cord/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC cord/SCOPTIONS.amiga cord/SMakefile.amiga
! 143:
! 144: CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
! 145:
! 146: SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.s \
! 147: sparc_mach_dep.s gc.h gc_typed.h gc_hdrs.h gc_priv.h gc_private.h \
! 148: gcconfig.h gc_mark.h include/gc_inl.h include/gc_inline.h gc.man \
! 149: threadlibs.c if_mach.c if_not_there.c gc_cpp.cc gc_cpp.h weakpointer.h \
! 150: gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h gc_alloc.h \
! 151: include/new_gc_alloc.h include/javaxfc.h sparc_sunos4_mach_dep.s \
! 152: solaris_threads.h $(CORD_SRCS)
! 153:
! 154: OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAKEFILE BCC_MAKEFILE \
! 155: README test.c test_cpp.cc setjmp_t.c SMakefile.amiga \
! 156: SCoptions.amiga README.amiga README.win32 cord/README \
! 157: cord/gc.h include/gc.h include/gc_typed.h include/cord.h \
! 158: include/ec.h include/private/cord_pos.h include/private/gcconfig.h \
! 159: include/private/gc_hdrs.h include/private/gc_priv.h \
! 160: include/gc_cpp.h README.rs6000 \
! 161: include/weakpointer.h README.QUICK callprocs pc_excludes \
! 162: barrett_diagram README.OS2 README.Mac MacProjects.sit.hqx \
! 163: MacOS.c EMX_MAKEFILE makefile.depend README.debugging \
! 164: include/gc_cpp.h Mac_files/datastart.c Mac_files/dataend.c \
! 165: Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
! 166: add_gc_prefix.c README.solaris2 README.sgi README.hp README.uts \
! 167: win32_threads.c NT_THREADS_MAKEFILE gc.mak README.dj Makefile.dj \
! 168: README.alpha README.linux version.h Makefile.DLLs \
! 169: WCC_MAKEFILE
! 170:
! 171: CORD_INCLUDE_FILES= $(srcdir)/gc.h $(srcdir)/cord/cord.h $(srcdir)/cord/ec.h \
! 172: $(srcdir)/cord/private/cord_pos.h
! 173:
! 174: UTILS= if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX)
! 175:
! 176: # Libraries needed for curses applications. Only needed for de.
! 177: CURSES= -lcurses -ltermlib
! 178:
! 179: # The following is irrelevant on most systems. But a few
! 180: # versions of make otherwise fork the shell specified in
! 181: # the SHELL environment variable.
! 182: SHELL= /bin/sh
! 183:
! 184: SPECIALCFLAGS =
! 185: # Alternative flags to the C compiler for mach_dep.c.
! 186: # Mach_dep.c often doesn't like optimization, and it's
! 187: # not time-critical anyway.
! 188: # Set SPECIALCFLAGS to -q nodirect_code on Encore.
! 189:
! 190: all: gc.a gctest$(EXE_SUFFIX)
! 191:
! 192: pcr: PCR-Makefile gc_private.h gc_hdrs.h gc.h gcconfig.h mach_dep.o $(SRCS)
! 193: make -f PCR-Makefile depend
! 194: make -f PCR-Makefile
! 195:
! 196: $(OBJS) test.o dyn_load.o dyn_load_sunos53.o: $(srcdir)/gc_priv.h $(srcdir)/gc_hdrs.h $(srcdir)/gc.h \
! 197: $(srcdir)/gcconfig.h $(srcdir)/gc_typed.h Makefile
! 198: # The dependency on Makefile is needed. Changing
! 199: # options such as -DSILENT affects the size of GC_arrays,
! 200: # invalidating all .o files that rely on gc_priv.h
! 201:
! 202: mark.o typd_mlc.o finalize.o: $(srcdir)/gc_mark.h
! 203:
! 204: base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
! 205: echo > base_lib
! 206: rm -f on_sparc_sunos5_1
! 207: ./if_mach SPARC SUNOS5 touch on_sparc_sunos5_1
! 208: ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o
! 209: ./if_not_there on_sparc_sunos5_1 $(AR) ru gc.a $(OBJS) dyn_load.o
! 210: -./if_not_there on_sparc_sunos5_1 $(RANLIB) gc.a
! 211: # ignore ranlib failure; that usually means it doesn't exist, and isn't needed
! 212:
! 213: cords: $(CORD_OBJS) cord/cordtest$(EXE_SUFFIX) $(UTILS)
! 214: rm -f on_sparc_sunos5_3
! 215: ./if_mach SPARC SUNOS5 touch on_sparc_sunos5_3
! 216: ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS)
! 217: ./if_not_there on_sparc_sunos5_3 $(AR) ru gc.a $(CORD_OBJS)
! 218: -./if_not_there on_sparc_sunos5_3 $(RANLIB) gc.a
! 219:
! 220: gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/gc_cpp.h $(srcdir)/gc.h Makefile
! 221: $(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
! 222:
! 223: test_cpp$(EXE_SUFFIX): $(srcdir)/test_cpp.cc $(srcdir)/gc_cpp.h gc_cpp.o $(srcdir)/gc.h \
! 224: base_lib $(UTILS)
! 225: rm -f test_cpp test_cpp$(EXE_SUFFIX)
! 226: ./if_mach HP_PA "" $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a -ldld
! 227: ./if_not_there test_cpp$(EXE_SUFFIX) $(CXXLD) $(CXXFLAGS) -o test_cpp$(EXE_SUFFIX) $(srcdir)/test_cpp.cc gc_cpp.o gc.a
! 228: rm -f test_cpp
! 229:
! 230: c++: gc_cpp.o $(srcdir)/gc_cpp.h test_cpp$(EXE_SUFFIX)
! 231: rm -f on_sparc_sunos5_4
! 232: ./if_mach SPARC SUNOS5 touch on_sparc_sunos5_4
! 233: ./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o
! 234: ./if_not_there on_sparc_sunos5_4 $(AR) ru gc.a gc_cpp.o
! 235: -./if_not_there on_sparc_sunos5_4 $(RANLIB) gc.a
! 236: ./test_cpp$(EXE_SUFFIX) 1
! 237: echo > c++
! 238:
! 239: dyn_load_sunos53.o: dyn_load.c
! 240: $(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
! 241:
! 242: # SunOS5 shared library version of the collector
! 243: sunos5gc.so: $(OBJS) dyn_load_sunos53.o
! 244: $(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o -ldl
! 245: ln sunos5gc.so libgc.so
! 246:
! 247: # Alpha/OSF shared library version of the collector
! 248: libalphagc.so: $(OBJS)
! 249: ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
! 250: ln libalphagc.so libgc.so
! 251:
! 252: # IRIX shared library version of the collector
! 253: libirixgc.so: $(OBJS) dyn_load.o
! 254: ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
! 255: ln libirixgc.so libgc.so
! 256:
! 257: # Linux shared library version of the collector
! 258: liblinuxgc.so: $(OBJS) dyn_load.o
! 259: gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o -lo
! 260: ln liblinuxgc.so libgc.so
! 261:
! 262: mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s $(srcdir)/mips_ultrix_mach_dep.s $(srcdir)/rs6000_mach_dep.s $(UTILS)
! 263: rm -f mach_dep.o
! 264: ./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.s
! 265: ./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
! 266: ./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
! 267: ./if_mach RS6000 "" $(AS) -o mach_dep.o $(srcdir)/rs6000_mach_dep.s
! 268: ./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.s
! 269: ./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.s
! 270: ./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
! 271: ./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
! 272:
! 273: mark_rts.o: $(srcdir)/mark_rts.c if_mach if_not_there $(UTILS)
! 274: rm -f mark_rts.o
! 275: -./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
! 276: ./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
! 277: # Work-around for DEC optimizer tail recursion elimination bug.
! 278: # The ALPHA-specific line should be removed if gcc is used.
! 279:
! 280: alloc.o: version.h
! 281:
! 282: cord/cordbscs.o: $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
! 283: $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
! 284: mv cordbscs.o cord/cordbscs.o
! 285: # not all compilers understand -o filename
! 286:
! 287: cord/cordxtra.o: $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
! 288: $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
! 289: mv cordxtra.o cord/cordxtra.o
! 290:
! 291: cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
! 292: $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
! 293: mv cordprnt.o cord/cordprnt.o
! 294:
! 295: cord/cordtest$(EXE_SUFFIX): $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS) /tmp
! 296: rm -f cord/cordtest$(EXE_SUFFIX)
! 297: ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest$(EXE_SUFFIX) $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
! 298: ./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/cordtest$(EXE_SUFFIX) $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld
! 299: ./if_not_there cord/cordtest$(EXE_SUFFIX) $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a
! 300: rm -f cord/cordtest cordtest
! 301: -mv cordtest$(EXE_SUFFIX) cord/
! 302:
! 303: /tmp: $(UTILS)
! 304: ./if_not_there /tmp mkdir /tmp
! 305:
! 306: cord/de$(EXE_SUFFIX): $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
! 307: rm -f cord/de cord/de$(EXE_SUFFIX)
! 308: ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
! 309: ./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld
! 310: ./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
! 311: ./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
! 312: ./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
! 313: ./if_not_there cord/de$(EXE_SUFFIX) $(CC) $(CFLAGS) -o cord/de$(EXE_SUFFIX) $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES)
! 314:
! 315: if_mach$(EXE_SUFFIX): $(srcdir)/if_mach.c $(srcdir)/gcconfig.h
! 316: rm -f if_mach if_mach$(EXE_SUFFIX)
! 317: $(CC) $(CFLAGS) -o if_mach $(srcdir)/if_mach.c
! 318: rm -f if_mach
! 319:
! 320: threadlibs$(EXE_SUFFIX): $(srcdir)/threadlibs.c $(srcdir)/gcconfig.h Makefile
! 321: rm -f threadlibs threadlibs$(EXE_SUFFIX)
! 322: $(CC) $(CFLAGS) -o threadlibs $(srcdir)/threadlibs.c
! 323: rm -f threadlibs
! 324:
! 325: if_not_there$(EXE_SUFFIX): $(srcdir)/if_not_there.c
! 326: rm -f if_not_there if_not_there$(EXE_SUFFIX)
! 327: $(CC) $(CFLAGS) -o if_not_there $(srcdir)/if_not_there.c
! 328: rm -f if_not_there
! 329:
! 330: # Clean removes *.o several times,
! 331: # because as the first one doesn't seem to get them all!
! 332: clean:
! 333: rm -f gc.a *.o
! 334: rm -f *.o
! 335: rm -f *.o
! 336: rm -f cord/*.o
! 337: rm -f gctest gctest_dyn_link test_cpp
! 338: rm -f setjmp_test mon.out gmon.out a.out core if_not_there if_mach
! 339: rm -f threadlibs $(CORD_OBJS) cordtest cord/cordtest de cord/de
! 340: rm -f gctest$(EXE_SUFFIX) gctest_dyn_link$(EXE_SUFFIX) test_cpp$(EXE_SUFFIX)
! 341: rm -f setjmp_test$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX) if_mach$(EXE_SUFFIX)
! 342: rm -f threadlibs$(EXE_SUFFIX) cord/cordtest$(EXE_SUFFIX)
! 343: -rm -f *~
! 344:
! 345: gctest$(EXE_SUFFIX): test.o gc.a if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX)
! 346: rm -f gctest gctest$(EXE_SUFFIX)
! 347: ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest test.o gc.a -lucb
! 348: ./if_mach HP_PA "" $(CC) $(CFLAGS) -o gctest test.o gc.a -ldld
! 349: ./if_not_there gctest$(EXE_SUFFIX) $(CC) $(CFLAGS) -o gctest$(EXE_SUFFIX) test.o gc.a
! 350: rm -f gctest
! 351:
! 352: # If an optimized setjmp_test generates a segmentation fault,
! 353: # odds are your compiler is broken. Gctest may still work.
! 354: # Try compiling setjmp_t.c unoptimized.
! 355: setjmp_test$(EXE_SUFFIX): $(srcdir)/setjmp_t.c $(srcdir)/gc.h \
! 356: if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX)
! 357: rm -f setjmp_test$(EXE_SUFFIX)
! 358: $(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c
! 359: rm -f setjmp_test
! 360:
! 361: test: KandRtest cord/cordtest$(EXE_SUFFIX)
! 362: ./cord/cordtest$(EXE_SUFFIX)
! 363:
! 364: # Those tests that work even with a K&R C compiler:
! 365: KandRtest: setjmp_test$(EXE_SUFFIX) gctest$(EXE_SUFFIX)
! 366: ./setjmp_test$(EXE_SUFFIX)
! 367: ./gctest$(EXE_SUFFIX)
! 368:
! 369: add_gc_prefix$(EXE_SUFFIX): add_gc_prefix.c
! 370: $(CC) -o add_gc_prefix$(EXE_SUFFIX) $(srcdir)/add_gc_prefix.c
! 371: rm -f add_gc_prefix
! 372:
! 373: gc.tar: $(SRCS) $(OTHER_FILES) add_gc_prefix
! 374: ./add_gc_prefix$(EXE_SUFFIX) $(SRCS) $(OTHER_FILES) > /tmp/gc.tar-files
! 375: (cd $(srcdir)/.. ; tar cvfh - `cat /tmp/gc.tar-files`) > gc.tar
! 376:
! 377: pc_gc.tar: $(SRCS) $(OTHER_FILES)
! 378: tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES)
! 379:
! 380: floppy: pc_gc.tar
! 381: -mmd a:/cord
! 382: -mmd a:/cord/private
! 383: -mmd a:/include
! 384: -mmd a:/include/private
! 385: mkdir /tmp/pc_gc
! 386: cat pc_gc.tar | (cd /tmp/pc_gc; tar xvf -)
! 387: -mcopy -tmn /tmp/pc_gc/* a:
! 388: -mcopy -tmn /tmp/pc_gc/cord/* a:/cord
! 389: -mcopy -mn /tmp/pc_gc/cord/de_win.ICO a:/cord
! 390: -mcopy -tmn /tmp/pc_gc/cord/private/* a:/cord/private
! 391: -mcopy -tmn /tmp/pc_gc/include/* a:/include
! 392: -mcopy -tmn /tmp/pc_gc/include/private/* a:/include/private
! 393: rm -r /tmp/pc_gc
! 394:
! 395: gc.tar.Z: gc.tar
! 396: compress gc.tar
! 397:
! 398: gc.tar.gz: gc.tar
! 399: gzip gc.tar
! 400:
! 401: lint: $(CSRCS) test.c
! 402: lint -DLINT $(CSRCS) test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall"
! 403:
! 404: # BTL: added to test shared library version of collector.
! 405: # Currently works only under SunOS5. Requires GC_INIT call from statically
! 406: # loaded client code.
! 407: ABSDIR = `pwd`
! 408: gctest_dyn_link: test.o libgc.so
! 409: $(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link test.o -lgc -ldl -lthread
! 410:
! 411: gctest_irix_dyn_link: test.o libirixgc.so
! 412: $(CC) -L$(ABSDIR) -o gctest_irix_dyn_link test.o -lirixgc
! 413:
! 414: test_dll.o: test.c libgc_globals.h
! 415: $(CC) $(CFLAGS) -DGC_USE_DLL -c test.c -o test_dll.o
! 416:
! 417: test_dll: test_dll.o libgc_dll.a libgc.dll
! 418: $(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll
! 419:
! 420: SYM_PREFIX-libgc=GC
! 421:
! 422: # Uncomment the following line to build a GNU win32 DLL
! 423: # include Makefile.DLLs
! 424:
! 425: reserved_namespace: $(SRCS)
! 426: for file in $(SRCS) test.c test_cpp.cc; do \
! 427: sed s/GC_/_GC_/g < $$file > tmp; \
! 428: cp tmp $$file; \
! 429: done
! 430:
! 431: user_namespace: $(SRCS)
! 432: for file in $(SRCS) test.c test_cpp.cc; do \
! 433: sed s/_GC_/GC_/g < $$file > tmp; \
! 434: cp tmp $$file; \
! 435: done
! 436:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>