Annotation of OpenXM/src/kan96xx/gmp-2.0.2/gmp.info-2, Revision 1.1
1.1 ! maekawa 1: This is Info file gmp.info, produced by Makeinfo-1.64 from the input
! 2: file gmp.texi.
! 3:
! 4: START-INFO-DIR-ENTRY
! 5: * gmp: (gmp.info). GNU Multiple Precision Arithmetic Library.
! 6: END-INFO-DIR-ENTRY
! 7:
! 8: This file documents GNU MP, a library for arbitrary-precision
! 9: arithmetic.
! 10:
! 11: Copyright (C) 1991, 1993, 1994, 1995, 1996 Free Software Foundation,
! 12: Inc.
! 13:
! 14: Permission is granted to make and distribute verbatim copies of this
! 15: manual provided the copyright notice and this permission notice are
! 16: preserved on all copies.
! 17:
! 18: Permission is granted to copy and distribute modified versions of
! 19: this manual under the conditions for verbatim copying, provided that
! 20: the entire resulting derived work is distributed under the terms of a
! 21: permission notice identical to this one.
! 22:
! 23: Permission is granted to copy and distribute translations of this
! 24: manual into another language, under the above conditions for modified
! 25: versions, except that this permission notice may be stated in a
! 26: translation approved by the Foundation.
! 27:
! 28:
! 29: File: gmp.info, Node: Floating-point Functions, Next: Low-level Functions, Prev: Rational Number Functions, Up: Top
! 30:
! 31: Floating-point Functions
! 32: ************************
! 33:
! 34: This is a description of the *preliminary* interface for
! 35: floating-point arithmetic in GNU MP 2.
! 36:
! 37: The floating-point functions expect arguments of type `mpf_t'.
! 38:
! 39: The MP floating-point functions have an interface that is similar to
! 40: the MP integer functions. The function prefix for floating-point
! 41: operations is `mpf_'.
! 42:
! 43: There is one significant characteristic of floating-point numbers
! 44: that has motivated a difference between this function class and other
! 45: MP function classes: the inherent inexactness of floating point
! 46: arithmetic. The user has to specify the precision of each variable. A
! 47: computation that assigns a variable will take place with the precision
! 48: of the assigned variable; the precision of variables used as input is
! 49: ignored.
! 50:
! 51: The precision of a calculation is defined as follows: Compute the
! 52: requested operation exactly (with "infinite precision"), and truncate
! 53: the result to the destination variable precision. Even if the user has
! 54: asked for a very high precision, MP will not calculate with superfluous
! 55: digits. For example, if two low-precision numbers of nearly equal
! 56: magnitude are added, the precision of the result will be limited to
! 57: what is required to represent the result accurately.
! 58:
! 59: The MP floating-point functions are *not* intended as a smooth
! 60: extension to the IEEE P754 arithmetic. Specifically, the results
! 61: obtained on one computer often differs from the results obtained on a
! 62: computer with a different word size.
! 63:
! 64: * Menu:
! 65:
! 66: * Initializing Floats::
! 67: * Assigning Floats::
! 68: * Simultaneous Float Init & Assign::
! 69: * Converting Floats::
! 70: * Float Arithmetic::
! 71: * Float Comparison::
! 72: * I/O of Floats::
! 73: * Miscellaneous Float Functions::
! 74:
! 75:
! 76: File: gmp.info, Node: Initializing Floats, Next: Assigning Floats, Up: Floating-point Functions
! 77:
! 78: Initialization and Assignment Functions
! 79: =======================================
! 80:
! 81: - Function: void mpf_set_default_prec (unsigned long int PREC)
! 82: Set the default precision to be *at least* PREC bits. All
! 83: subsequent calls to `mpf_init' will use this precision, but
! 84: previously initialized variables are unaffected.
! 85:
! 86: An `mpf_t' object must be initialized before storing the first value
! 87: in it. The functions `mpf_init' and `mpf_init2' are used for that
! 88: purpose.
! 89:
! 90: - Function: void mpf_init (mpf_t X)
! 91: Initialize X to 0. Normally, a variable should be initialized
! 92: once only or at least be cleared, using `mpf_clear', between
! 93: initializations. The precision of X is undefined unless a default
! 94: precision has already been established by a call to
! 95: `mpf_set_default_prec'.
! 96:
! 97: - Function: void mpf_init2 (mpf_t X, unsigned long int PREC)
! 98: Initialize X to 0 and set its precision to be *at least* PREC
! 99: bits. Normally, a variable should be initialized once only or at
! 100: least be cleared, using `mpf_clear', between initializations.
! 101:
! 102: - Function: void mpf_clear (mpf_t X)
! 103: Free the space occupied by X. Make sure to call this function for
! 104: all `mpf_t' variables when you are done with them.
! 105:
! 106: Here is an example on how to initialize floating-point variables:
! 107: {
! 108: mpf_t x, y;
! 109: mpf_init (x); /* use default precision */
! 110: mpf_init2 (y, 256); /* precision *at least* 256 bits */
! 111: ...
! 112: /* Unless the program is about to exit, do ... */
! 113: mpf_clear (x);
! 114: mpf_clear (y);
! 115: }
! 116:
! 117: The following three functions are useful for changing the precision
! 118: during a calculation. A typical use would be for adjusting the
! 119: precision gradually in iterative algorithms like Newton-Raphson, making
! 120: the computation precision closely match the actual accurate part of the
! 121: numbers.
! 122:
! 123: - Function: void mpf_set_prec (mpf_t ROP, unsigned long int PREC)
! 124: Set the precision of ROP to be *at least* PREC bits. Since
! 125: changing the precision involves calls to `realloc', this routine
! 126: should not be called in a tight loop.
! 127:
! 128: - Function: unsigned long int mpf_get_prec (mpf_t OP)
! 129: Return the precision actually used for assignments of OP.
! 130:
! 131: - Function: void mpf_set_prec_raw (mpf_t ROP, unsigned long int PREC)
! 132: Set the precision of ROP to be *at least* PREC bits. This is a
! 133: low-level function that does not change the allocation. The PREC
! 134: argument must not be larger that the precision previously returned
! 135: by `mpf_get_prec'. It is crucial that the precision of ROP is
! 136: ultimately reset to exactly the value returned by `mpf_get_prec'.
! 137:
! 138:
! 139: File: gmp.info, Node: Assigning Floats, Next: Simultaneous Float Init & Assign, Prev: Initializing Floats, Up: Floating-point Functions
! 140:
! 141: Assignment Functions
! 142: --------------------
! 143:
! 144: These functions assign new values to already initialized floats
! 145: (*note Initializing Floats::.).
! 146:
! 147: - Function: void mpf_set (mpf_t ROP, mpf_t OP)
! 148: - Function: void mpf_set_ui (mpf_t ROP, unsigned long int OP)
! 149: - Function: void mpf_set_si (mpf_t ROP, signed long int OP)
! 150: - Function: void mpf_set_d (mpf_t ROP, double OP)
! 151: - Function: void mpf_set_z (mpf_t ROP, mpz_t OP)
! 152: - Function: void mpf_set_q (mpf_t ROP, mpq_t OP)
! 153: Set the value of ROP from OP.
! 154:
! 155: - Function: int mpf_set_str (mpf_t ROP, char *STR, int BASE)
! 156: Set the value of ROP from the string in STR. The string is of the
! 157: form `M@N' or, if the base is 10 or less, alternatively `MeN'.
! 158: `M' is the mantissa and `N' is the exponent. The mantissa is
! 159: always in the specified base. The exponent is either in the
! 160: specified base or, if BASE is negative, in decimal.
! 161:
! 162: The argument BASE may be in the ranges 2 to 36, or -36 to -2.
! 163: Negative values are used to specify that the exponent is in
! 164: decimal.
! 165:
! 166: Unlike the corresponding `mpz' function, the base will not be
! 167: determined from the leading characters of the string if BASE is 0.
! 168: This is so that numbers like `0.23' are not interpreted as octal.
! 169:
! 170: White space is allowed in the string, and is simply ignored.
! 171:
! 172: This function returns 0 if the entire string up to the '\0' is a
! 173: valid number in base BASE. Otherwise it returns -1.
! 174:
! 175:
! 176: File: gmp.info, Node: Simultaneous Float Init & Assign, Next: Converting Floats, Prev: Assigning Floats, Up: Floating-point Functions
! 177:
! 178: Combined Initialization and Assignment Functions
! 179: ------------------------------------------------
! 180:
! 181: For convenience, MP provides a parallel series of initialize-and-set
! 182: functions which initialize the output and then store the value there.
! 183: These functions' names have the form `mpf_init_set...'
! 184:
! 185: Once the float has been initialized by any of the `mpf_init_set...'
! 186: functions, it can be used as the source or destination operand for the
! 187: ordinary float functions. Don't use an initialize-and-set function on
! 188: a variable already initialized!
! 189:
! 190: - Function: void mpf_init_set (mpf_t ROP, mpf_t OP)
! 191: - Function: void mpf_init_set_ui (mpf_t ROP, unsigned long int OP)
! 192: - Function: void mpf_init_set_si (mpf_t ROP, signed long int OP)
! 193: - Function: void mpf_init_set_d (mpf_t ROP, double OP)
! 194: Initialize ROP and set its value from OP.
! 195:
! 196: The precision of ROP will be taken from the active default
! 197: precision, as set by `mpf_set_default_prec'.
! 198:
! 199: - Function: int mpf_init_set_str (mpf_t ROP, char *STR, int BASE)
! 200: Initialize ROP and set its value from the string in STR. See
! 201: `mpf_set_str' above for details on the assignment operation.
! 202:
! 203: Note that ROP is initialized even if an error occurs. (I.e., you
! 204: have to call `mpf_clear' for it.)
! 205:
! 206: The precision of ROP will be taken from the active default
! 207: precision, as set by `mpf_set_default_prec'.
! 208:
! 209:
! 210: File: gmp.info, Node: Converting Floats, Next: Float Arithmetic, Prev: Simultaneous Float Init & Assign, Up: Floating-point Functions
! 211:
! 212: Conversion Functions
! 213: ====================
! 214:
! 215: - Function: double mpf_get_d (mpf_t OP)
! 216: Convert OP to a double.
! 217:
! 218: - Function: char * mpf_get_str (char *STR, mp_exp_t *EXPPTR, int BASE,
! 219: size_t N_DIGITS, mpf_t OP)
! 220: Convert OP to a string of digits in base BASE. The base may vary
! 221: from 2 to 36. Generate at most N_DIGITS significant digits, or if
! 222: N_DIGITS is 0, the maximum number of digits accurately
! 223: representable by OP.
! 224:
! 225: If STR is NULL, space for the mantissa is allocated using the
! 226: default allocation function, and a pointer to the string is
! 227: returned.
! 228:
! 229: If STR is not NULL, it should point to a block of storage enough
! 230: large for the mantissa, i.e., N_DIGITS + 2. The two extra bytes
! 231: are for a possible minus sign, and for the terminating null
! 232: character.
! 233:
! 234: The exponent is written through the pointer EXPPTR.
! 235:
! 236: If N_DIGITS is 0, the maximum number of digits meaningfully
! 237: achievable from the precision of OP will be generated. Note that
! 238: the space requirements for STR in this case will be impossible for
! 239: the user to predetermine. Therefore, you need to pass NULL for
! 240: the string argument whenever N_DIGITS is 0.
! 241:
! 242: The generated string is a fraction, with an implicit radix point
! 243: immediately to the left of the first digit. For example, the
! 244: number 3.1416 would be returned as "31416" in the string and 1
! 245: written at EXPPTR.
! 246:
! 247:
! 248: File: gmp.info, Node: Float Arithmetic, Next: Float Comparison, Prev: Converting Floats, Up: Floating-point Functions
! 249:
! 250: Arithmetic Functions
! 251: ====================
! 252:
! 253: - Function: void mpf_add (mpf_t ROP, mpf_t OP1, mpf_t OP2)
! 254: - Function: void mpf_add_ui (mpf_t ROP, mpf_t OP1, unsigned long int
! 255: OP2)
! 256: Set ROP to OP1 + OP2.
! 257:
! 258: - Function: void mpf_sub (mpf_t ROP, mpf_t OP1, mpf_t OP2)
! 259: - Function: void mpf_ui_sub (mpf_t ROP, unsigned long int OP1, mpf_t
! 260: OP2)
! 261: - Function: void mpf_sub_ui (mpf_t ROP, mpf_t OP1, unsigned long int
! 262: OP2)
! 263: Set ROP to OP1 - OP2.
! 264:
! 265: - Function: void mpf_mul (mpf_t ROP, mpf_t OP1, mpf_t OP2)
! 266: - Function: void mpf_mul_ui (mpf_t ROP, mpf_t OP1, unsigned long int
! 267: OP2)
! 268: Set ROP to OP1 times OP2.
! 269:
! 270: Division is undefined if the divisor is zero, and passing a zero
! 271: divisor to the divide functions will make these functions intentionally
! 272: divide by zero. This gives the user the possibility to handle
! 273: arithmetic exceptions in these functions in the same manner as other
! 274: arithmetic exceptions.
! 275:
! 276: - Function: void mpf_div (mpf_t ROP, mpf_t OP1, mpf_t OP2)
! 277: - Function: void mpf_ui_div (mpf_t ROP, unsigned long int OP1, mpf_t
! 278: OP2)
! 279: - Function: void mpf_div_ui (mpf_t ROP, mpf_t OP1, unsigned long int
! 280: OP2)
! 281: Set ROP to OP1/OP2.
! 282:
! 283: - Function: void mpf_sqrt (mpf_t ROP, mpf_t OP)
! 284: - Function: void mpf_sqrt_ui (mpf_t ROP, unsigned long int OP)
! 285: Set ROP to the square root of OP.
! 286:
! 287: - Function: void mpf_neg (mpf_t ROP, mpf_t OP)
! 288: Set ROP to -OP.
! 289:
! 290: - Function: void mpf_abs (mpf_t ROP, mpf_t OP)
! 291: Set ROP to the absolute value of OP.
! 292:
! 293: - Function: void mpf_mul_2exp (mpf_t ROP, mpf_t OP1, unsigned long int
! 294: OP2)
! 295: Set ROP to OP1 times 2 raised to OP2.
! 296:
! 297: - Function: void mpf_div_2exp (mpf_t ROP, mpf_t OP1, unsigned long int
! 298: OP2)
! 299: Set ROP to OP1 divided by 2 raised to OP2.
! 300:
! 301:
! 302: File: gmp.info, Node: Float Comparison, Next: I/O of Floats, Prev: Float Arithmetic, Up: Floating-point Functions
! 303:
! 304: Comparison Functions
! 305: ====================
! 306:
! 307: - Function: int mpf_cmp (mpf_t OP1, mpf_t OP2)
! 308: - Function: int mpf_cmp_ui (mpf_t OP1, unsigned long int OP2)
! 309: - Function: int mpf_cmp_si (mpf_t OP1, signed long int OP2)
! 310: Compare OP1 and OP2. Return a positive value if OP1 > OP2, zero
! 311: if OP1 = OP2, and a negative value if OP1 < OP2.
! 312:
! 313: - Function: int mpf_eq (mpf_t OP1, mpf_t OP2, unsigned long int op3)
! 314: Return non-zero if the first OP3 bits of OP1 and OP2 are equal,
! 315: zero otherwise. I.e., test of OP1 and OP2 are approximately equal.
! 316:
! 317: - Function: void mpf_reldiff (mpf_t ROP, mpf_t OP1, mpf_t OP2)
! 318: Compute the relative difference between OP1 and OP2 and store the
! 319: result in ROP.
! 320:
! 321: - Macro: int mpf_sgn (mpf_t OP)
! 322: Return +1 if OP > 0, 0 if OP = 0, and -1 if OP < 0.
! 323:
! 324: This function is actually implemented as a macro. It evaluates its
! 325: arguments multiple times.
! 326:
! 327:
! 328: File: gmp.info, Node: I/O of Floats, Next: Miscellaneous Float Functions, Prev: Float Comparison, Up: Floating-point Functions
! 329:
! 330: Input and Output Functions
! 331: ==========================
! 332:
! 333: Functions that perform input from a stdio stream, and functions that
! 334: output to a stdio stream. Passing a NULL pointer for a STREAM argument
! 335: to any of these functions will make them read from `stdin' and write to
! 336: `stdout', respectively.
! 337:
! 338: When using any of these functions, it is a good idea to include
! 339: `stdio.h' before `gmp.h', since that will allow `gmp.h' to define
! 340: prototypes for these functions.
! 341:
! 342: - Function: size_t mpf_out_str (FILE *STREAM, int BASE, size_t
! 343: N_DIGITS, mpf_t OP)
! 344: Output OP on stdio stream STREAM, as a string of digits in base
! 345: BASE. The base may vary from 2 to 36. Print at most N_DIGITS
! 346: significant digits, or if N_DIGITS is 0, the maximum number of
! 347: digits accurately representable by OP.
! 348:
! 349: In addition to the significant digits, a leading `0.' and a
! 350: trailing exponent, in the form `eNNN', are printed. If BASE is
! 351: greater than 10, `@' will be used instead of `e' as exponent
! 352: delimiter.
! 353:
! 354: Return the number of bytes written, or if an error occurred,
! 355: return 0.
! 356:
! 357: - Function: size_t mpf_inp_str (mpf_t ROP, FILE *STREAM, int BASE)
! 358: Input a string in base BASE from stdio stream STREAM, and put the
! 359: read float in ROP. The string is of the form `M@N' or, if the
! 360: base is 10 or less, alternatively `MeN'. `M' is the mantissa and
! 361: `N' is the exponent. The mantissa is always in the specified
! 362: base. The exponent is either in the specified base or, if BASE is
! 363: negative, in decimal.
! 364:
! 365: The argument BASE may be in the ranges 2 to 36, or -36 to -2.
! 366: Negative values are used to specify that the exponent is in
! 367: decimal.
! 368:
! 369: Unlike the corresponding `mpz' function, the base will not be
! 370: determined from the leading characters of the string if BASE is 0.
! 371: This is so that numbers like `0.23' are not interpreted as octal.
! 372:
! 373: Return the number of bytes read, or if an error occurred, return 0.
! 374:
! 375:
! 376: File: gmp.info, Node: Miscellaneous Float Functions, Prev: I/O of Floats, Up: Floating-point Functions
! 377:
! 378: Miscellaneous Functions
! 379: =======================
! 380:
! 381: - Function: void mpf_random2 (mpf_t ROP, mp_size_t MAX_SIZE, mp_exp_t
! 382: MAX_EXP)
! 383: Generate a random float of at most MAX_SIZE limbs, with long
! 384: strings of zeros and ones in the binary representation. The
! 385: exponent of the number is in the interval -EXP to EXP. This
! 386: function is useful for testing functions and algorithms, since
! 387: this kind of random numbers have proven to be more likely to
! 388: trigger corner-case bugs. Negative random numbers are generated
! 389: when MAX_SIZE is negative.
! 390:
! 391:
! 392: File: gmp.info, Node: Low-level Functions, Next: BSD Compatible Functions, Prev: Floating-point Functions, Up: Top
! 393:
! 394: Low-level Functions
! 395: *******************
! 396:
! 397: This chapter describes low-level MP functions, used to implement the
! 398: high-level MP functions, but also intended for time-critical user code.
! 399:
! 400: These functions start with the prefix `mpn_'.
! 401:
! 402: The `mpn' functions are designed to be as fast as possible, *not* to
! 403: provide a coherent calling interface. The different functions have
! 404: somewhat similar interfaces, but there are variations that make them
! 405: hard to use. These functions do as little as possible apart from the
! 406: real multiple precision computation, so that no time is spent on things
! 407: that not all callers need.
! 408:
! 409: A source operand is specified by a pointer to the least significant
! 410: limb and a limb count. A destination operand is specified by just a
! 411: pointer. It is the responsibility of the caller to ensure that the
! 412: destination has enough space for storing the result.
! 413:
! 414: With this way of specifying operands, it is possible to perform
! 415: computations on subranges of an argument, and store the result into a
! 416: subrange of a destination.
! 417:
! 418: A common requirement for all functions is that each source area
! 419: needs at least one limb. No size argument may be zero.
! 420:
! 421: The `mpn' functions is the base for the implementation of the `mpz_',
! 422: `mpf_', and `mpq_' functions.
! 423:
! 424: This example adds the number beginning at SRC1_PTR and the number
! 425: beginning at SRC2_PTR and writes the sum at DEST_PTR. All areas have
! 426: SIZE limbs.
! 427:
! 428: cy = mpn_add_n (dest_ptr, src1_ptr, src2_ptr, size)
! 429:
! 430: In the notation used here, a source operand is identified by the
! 431: pointer to the least significant limb, and the limb count in braces.
! 432: For example, {s1_ptr, s1_size}.
! 433:
! 434: - Function: mp_limb_t mpn_add_n (mp_limb_t * DEST_PTR, const mp_limb_t
! 435: * SRC1_PTR, const mp_limb_t * SRC2_PTR, mp_size_t SIZE)
! 436: Add {SRC1_PTR, SIZE} and {SRC2_PTR, SIZE}, and write the SIZE
! 437: least significant limbs of the result to DEST_PTR. Return carry,
! 438: either 0 or 1.
! 439:
! 440: This is the lowest-level function for addition. It is the
! 441: preferred function for addition, since it is written in assembly
! 442: for most targets. For addition of a variable to itself (i.e.,
! 443: SRC1_PTR equals SRC2_PTR, use `mpn_lshift' with a count of 1 for
! 444: optimal speed.
! 445:
! 446: - Function: mp_limb_t mpn_add_1 (mp_limb_t * DEST_PTR, const mp_limb_t
! 447: * SRC1_PTR, mp_size_t SIZE, mp_limb_t SRC2_LIMB)
! 448: Add {SRC1_PTR, SIZE} and SRC2_LIMB, and write the SIZE least
! 449: significant limbs of the result to DEST_PTR. Return carry, either
! 450: 0 or 1.
! 451:
! 452: - Function: mp_limb_t mpn_add (mp_limb_t * DEST_PTR, const mp_limb_t *
! 453: SRC1_PTR, mp_size_t SRC1_SIZE, const mp_limb_t * SRC2_PTR,
! 454: mp_size_t SRC2_SIZE)
! 455: Add {SRC1_PTR, SRC1_SIZE} and {SRC2_PTR, SRC2_SIZE}, and write the
! 456: SRC1_SIZE least significant limbs of the result to DEST_PTR.
! 457: Return carry, either 0 or 1.
! 458:
! 459: This function requires that SRC1_SIZE is greater than or equal to
! 460: SRC2_SIZE.
! 461:
! 462: - Function: mp_limb_t mpn_sub_n (mp_limb_t * DEST_PTR, const mp_limb_t
! 463: * SRC1_PTR, const mp_limb_t * SRC2_PTR, mp_size_t SIZE)
! 464: Subtract {SRC2_PTR, SRC2_SIZE} from {SRC1_PTR, SIZE}, and write
! 465: the SIZE least significant limbs of the result to DEST_PTR.
! 466: Return borrow, either 0 or 1.
! 467:
! 468: This is the lowest-level function for subtraction. It is the
! 469: preferred function for subtraction, since it is written in
! 470: assembly for most targets.
! 471:
! 472: - Function: mp_limb_t mpn_sub_1 (mp_limb_t * DEST_PTR, const mp_limb_t
! 473: * SRC1_PTR, mp_size_t SIZE, mp_limb_t SRC2_LIMB)
! 474: Subtract SRC2_LIMB from {SRC1_PTR, SIZE}, and write the SIZE least
! 475: significant limbs of the result to DEST_PTR. Return borrow,
! 476: either 0 or 1.
! 477:
! 478: - Function: mp_limb_t mpn_sub (mp_limb_t * DEST_PTR, const mp_limb_t *
! 479: SRC1_PTR, mp_size_t SRC1_SIZE, const mp_limb_t * SRC2_PTR,
! 480: mp_size_t SRC2_SIZE)
! 481: Subtract {SRC2_PTR, SRC2_SIZE} from {SRC1_PTR, SRC1_SIZE}, and
! 482: write the SRC1_SIZE least significant limbs of the result to
! 483: DEST_PTR. Return borrow, either 0 or 1.
! 484:
! 485: This function requires that SRC1_SIZE is greater than or equal to
! 486: SRC2_SIZE.
! 487:
! 488: - Function: void mpn_mul_n (mp_limb_t * DEST_PTR, const mp_limb_t *
! 489: SRC1_PTR, const mp_limb_t * SRC2_PTR, mp_size_t SIZE)
! 490: Multiply {SRC1_PTR, SIZE} and {SRC2_PTR, SIZE}, and write the
! 491: *entire* result to DEST_PTR.
! 492:
! 493: The destination has to have space for 2SIZE limbs, even if the
! 494: significant result might be one limb smaller.
! 495:
! 496: - Function: mp_limb_t mpn_mul_1 (mp_limb_t * DEST_PTR, const mp_limb_t
! 497: * SRC1_PTR, mp_size_t SIZE, mp_limb_t SRC2_LIMB)
! 498: Multiply {SRC1_PTR, SIZE} and SRC2_LIMB, and write the SIZE least
! 499: significant limbs of the product to DEST_PTR. Return the most
! 500: significant limb of the product.
! 501:
! 502: This is a low-level function that is a building block for general
! 503: multiplication as well as other operations in MP. It is written
! 504: in assembly for most targets.
! 505:
! 506: Don't call this function if SRC2_LIMB is a power of 2; use
! 507: `mpn_lshift' with a count equal to the logarithm of SRC2_LIMB
! 508: instead, for optimal speed.
! 509:
! 510: - Function: mp_limb_t mpn_addmul_1 (mp_limb_t * DEST_PTR, const
! 511: mp_limb_t * SRC1_PTR, mp_size_t SIZE, mp_limb_t SRC2_LIMB)
! 512: Multiply {SRC1_PTR, SIZE} and SRC2_LIMB, and add the SIZE least
! 513: significant limbs of the product to {DEST_PTR, SIZE} and write the
! 514: result to DEST_PTR DEST_PTR. Return the most significant limb of
! 515: the product, plus carry-out from the addition.
! 516:
! 517: This is a low-level function that is a building block for general
! 518: multiplication as well as other operations in MP. It is written
! 519: in assembly for most targets.
! 520:
! 521: - Function: mp_limb_t mpn_submul_1 (mp_limb_t * DEST_PTR, const
! 522: mp_limb_t * SRC1_PTR, mp_size_t SIZE, mp_limb_t SRC2_LIMB)
! 523: Multiply {SRC1_PTR, SIZE} and SRC2_LIMB, and subtract the SIZE
! 524: least significant limbs of the product from {DEST_PTR, SIZE} and
! 525: write the result to DEST_PTR. Return the most significant limb of
! 526: the product, minus borrow-out from the subtraction.
! 527:
! 528: This is a low-level function that is a building block for general
! 529: multiplication and division as well as other operations in MP. It
! 530: is written in assembly for most targets.
! 531:
! 532: - Function: mp_limb_t mpn_mul (mp_limb_t * DEST_PTR, const mp_limb_t *
! 533: SRC1_PTR, mp_size_t SRC1_SIZE, const mp_limb_t * SRC2_PTR,
! 534: mp_size_t SRC2_SIZE)
! 535: Multiply {SRC1_PTR, SRC1_SIZE} and {SRC2_PTR, SRC2_SIZE}, and
! 536: write the result to DEST_PTR. Return the most significant limb of
! 537: the result.
! 538:
! 539: The destination has to have space for SRC1_SIZE + SRC1_SIZE limbs,
! 540: even if the result might be one limb smaller.
! 541:
! 542: This function requires that SRC1_SIZE is greater than or equal to
! 543: SRC2_SIZE. The destination must be distinct from either input
! 544: operands.
! 545:
! 546: - Function: mp_size_t mpn_divrem (mp_limb_t * R1P, mp_size_t XSIZE,
! 547: mp_limb_t * RS2P, mp_size_t RS2SIZE, const mp_limb_t * S3P,
! 548: mp_size_t S3SIZE)
! 549: Divide {RS2P, RS2SIZE} by {S3P, S3SIZE}, and write the quotient at
! 550: R1P, with the exception of the most significant limb, which is
! 551: returned. The remainder replaces the dividend at RS2P.
! 552:
! 553: In addition to an integer quotient, XSIZE fraction limbs are
! 554: developed, and stored after the integral limbs. For most usages,
! 555: XSIZE will be zero.
! 556:
! 557: It is required that RS2SIZE is greater than or equal to S3SIZE.
! 558: It is required that the most significant bit of the divisor is set.
! 559:
! 560: If the quotient is not needed, pass RS2P + S3SIZE as R1P. Aside
! 561: from that special case, no overlap between arguments is permitted.
! 562:
! 563: Return the most significant limb of the quotient, either 0 or 1.
! 564:
! 565: The area at R1P needs to be RS2SIZE - S3SIZE + XSIZE limbs large.
! 566:
! 567: - Function: mp_limb_t mpn_divrem_1 (mp_limb_t * R1P, mp_size_t XSIZE,
! 568: mp_limb_t * S2P, mp_size_t S2SIZE, mp_limb_t S3LIMB)
! 569: Divide {S2P, S2SIZE} by S3LIMB, and write the quotient at R1P.
! 570: Return the remainder.
! 571:
! 572: In addition to an integer quotient, XSIZE fraction limbs are
! 573: developed, and stored after the integral limbs. For most usages,
! 574: XSIZE will be zero.
! 575:
! 576: The areas at R1P and S2P have to be identical or completely
! 577: separate, not partially overlapping.
! 578:
! 579: - Function: mp_size_t mpn_divmod (mp_limb_t * R1P, mp_limb_t * RS2P,
! 580: mp_size_t RS2SIZE, const mp_limb_t * S3P, mp_size_t S3SIZE)
! 581: *This interface is obsolete. It will disappear from future
! 582: releases. Use `mpn_divrem' in its stead.*
! 583:
! 584: - Function: mp_limb_t mpn_divmod_1 (mp_limb_t * R1P, mp_limb_t * S2P,
! 585: mp_size_t S2SIZE, mp_limb_t S3LIMB)
! 586: *This interface is obsolete. It will disappear from future
! 587: releases. Use `mpn_divrem_1' in its stead.*
! 588:
! 589: - Function: mp_limb_t mpn_mod_1 (mp_limb_t * S1P, mp_size_t S1SIZE,
! 590: mp_limb_t S2LIMB)
! 591: Divide {S1P, S1SIZE} by S2LIMB, and return the remainder.
! 592:
! 593: - Function: mp_limb_t mpn_preinv_mod_1 (mp_limb_t * S1P, mp_size_t
! 594: S1SIZE, mp_limb_t S2LIMB, mp_limb_t S3LIMB)
! 595: *This interface is obsolete. It will disappear from future
! 596: releases. Use `mpn_mod_1' in its stead.*
! 597:
! 598: - Function: mp_limb_t mpn_bdivmod (mp_limb_t * DEST_PTR, mp_limb_t *
! 599: S1P, mp_size_t S1SIZE, const mp_limb_t * S2P, mp_size_t
! 600: S2SIZE, unsigned long int D)
! 601: The function puts the low [D/BITS_PER_MP_LIMB] limbs of Q = {S1P,
! 602: S1SIZE}/{S2P, S2SIZE} mod 2^D at DEST_PTR, and returns the high D
! 603: mod BITS_PER_MP_LIMB bits of Q.
! 604:
! 605: {S1P, S1SIZE} - Q * {S2P, S2SIZE} mod 2^(S1SIZE*BITS_PER_MP_LIMB)
! 606: is placed at S1P. Since the low [D/BITS_PER_MP_LIMB] limbs of
! 607: this difference are zero, it is possible to overwrite the low
! 608: limbs at S1P with this difference, provided DEST_PTR <= S1P.
! 609:
! 610: This function requires that S1SIZE * BITS_PER_MP_LIMB >= D, and
! 611: that {S2P, S2SIZE} is odd.
! 612:
! 613: *This interface is preliminary. It might change incompatibly in
! 614: future revisions.*
! 615:
! 616: - Function: mp_limb_t mpn_lshift (mp_limb_t * DEST_PTR, const
! 617: mp_limb_t * SRC_PTR, mp_size_t SRC_SIZE, unsigned long int
! 618: COUNT)
! 619: Shift {SRC_PTR, SRC_SIZE} COUNT bits to the left, and write the
! 620: SRC_SIZE least significant limbs of the result to DEST_PTR. COUNT
! 621: might be in the range 1 to n - 1, on an n-bit machine. The bits
! 622: shifted out to the left are returned.
! 623:
! 624: Overlapping of the destination space and the source space is
! 625: allowed in this function, provided DEST_PTR >= SRC_PTR.
! 626:
! 627: This function is written in assembly for most targets.
! 628:
! 629: - Function: mp_limp_t mpn_rshift (mp_limb_t * DEST_PTR, const
! 630: mp_limb_t * SRC_PTR, mp_size_t SRC_SIZE, unsigned long int
! 631: COUNT)
! 632: Shift {SRC_PTR, SRC_SIZE} COUNT bits to the right, and write the
! 633: SRC_SIZE most significant limbs of the result to DEST_PTR. COUNT
! 634: might be in the range 1 to n - 1, on an n-bit machine. The bits
! 635: shifted out to the right are returned.
! 636:
! 637: Overlapping of the destination space and the source space is
! 638: allowed in this function, provided DEST_PTR <= SRC_PTR.
! 639:
! 640: This function is written in assembly for most targets.
! 641:
! 642: - Function: int mpn_cmp (const mp_limb_t * SRC1_PTR, const mp_limb_t *
! 643: SRC2_PTR, mp_size_t SIZE)
! 644: Compare {SRC1_PTR, SIZE} and {SRC2_PTR, SIZE} and return a
! 645: positive value if src1 > src2, 0 of they are equal, and a negative
! 646: value if src1 < src2.
! 647:
! 648: - Function: mp_size_t mpn_gcd (mp_limb_t * DEST_PTR, mp_limb_t *
! 649: SRC1_PTR, mp_size_t SRC1_SIZE, mp_limb_t * SRC2_PTR,
! 650: mp_size_t SRC2_SIZE)
! 651: Puts at DEST_PTR the greatest common divisor of {SRC1_PTR,
! 652: SRC1_SIZE} and {SRC2_PTR, SRC2_SIZE}; both source operands are
! 653: destroyed by the operation. The size in limbs of the greatest
! 654: common divisor is returned.
! 655:
! 656: {SRC1_PTR, SRC1_SIZE} must be odd, and {SRC2_PTR, SRC2_SIZE} must
! 657: have at least as many bits as {SRC1_PTR, SRC1_SIZE}.
! 658:
! 659: *This interface is preliminary. It might change incompatibly in
! 660: future revisions.*
! 661:
! 662: - Function: mp_limb_t mpn_gcd_1 (const mp_limb_t * SRC1_PTR, mp_size_t
! 663: SRC1_SIZE, mp_limb_t SRC2_LIMB)
! 664: Return the greatest common divisor of {SRC1_PTR, SRC1_SIZE} and
! 665: SRC2_LIMB, where SRC2_LIMB (as well as SRC1_SIZE) must be
! 666: different from 0.
! 667:
! 668: - Function: mp_size_t mpn_gcdext (mp_limb_t * R1P, mp_limb_t * R2P,
! 669: mp_limb_t * S1P, mp_size_t S1SIZE, mp_limb_t * S2P, mp_size_t
! 670: S2SIZE)
! 671: Puts at R1P the greatest common divisor of {S1P, S1SIZE} and {S2P,
! 672: S2SIZE}. The first cofactor is written at R2P. Both source
! 673: operands are destroyed by the operation. The size in limbs of the
! 674: greatest common divisor is returned.
! 675:
! 676: *This interface is preliminary. It might change incompatibly in
! 677: future revisions.*
! 678:
! 679: - Function: mp_size_t mpn_sqrtrem (mp_limb_t * R1P, mp_limb_t * R2P,
! 680: const mp_limb_t * SP, mp_size_t SIZE)
! 681: Compute the square root of {SP, SIZE} and put the result at R1P.
! 682: Write the remainder at R2P, unless R2P is NULL.
! 683:
! 684: Return the size of the remainder, whether R2P was NULL or non-NULL.
! 685: Iff the operand was a perfect square, the return value will be 0.
! 686:
! 687: The areas at R1P and SP have to be distinct. The areas at R2P and
! 688: SP have to be identical or completely separate, not partially
! 689: overlapping.
! 690:
! 691: The area at R1P needs to have space for ceil(SIZE/2) limbs. The
! 692: area at R2P needs to be SIZE limbs large.
! 693:
! 694: *This interface is preliminary. It might change incompatibly in
! 695: future revisions.*
! 696:
! 697: - Function: mp_size_t mpn_get_str (unsigned char *STR, int BASE,
! 698: mp_limb_t * S1P, mp_size_t S1SIZE)
! 699: Convert {S1P, S1SIZE} to a raw unsigned char array in base BASE.
! 700: The string is not in ASCII; to convert it to printable format, add
! 701: the ASCII codes for `0' or `A', depending on the base and range.
! 702: There may be leading zeros in the string.
! 703:
! 704: The area at S1P is clobbered.
! 705:
! 706: Return the number of characters in STR.
! 707:
! 708: The area at STR has to have space for the largest possible number
! 709: represented by a S1SIZE long limb array, plus one extra character.
! 710:
! 711: - Function: mp_size_t mpn_set_str (mp_limb_t * R1P, const char *STR,
! 712: size_t strsize, int BASE)
! 713: Convert the raw unsigned char array at STR of length STRSIZE to a
! 714: limb array {S1P, S1SIZE}. The base of STR is BASE.
! 715:
! 716: Return the number of limbs stored in R1P.
! 717:
! 718: - Function: unsigned long int mpn_scan0 (const mp_limb_t * S1P,
! 719: unsigned long int BIT)
! 720: Scan S1P from bit position BIT for the next clear bit.
! 721:
! 722: It is required that there be a clear bit within the area at S1P at
! 723: or beyond bit position BIT, so that the function has something to
! 724: return.
! 725:
! 726: *This interface is preliminary. It might change incompatibly in
! 727: future revisions.*
! 728:
! 729: - Function: unsigned long int mpn_scan1 (const mp_limb_t * S1P,
! 730: unsigned long int BIT)
! 731: Scan S1P from bit position BIT for the next set bit.
! 732:
! 733: It is required that there be a set bit within the area at S1P at or
! 734: beyond bit position BIT, so that the function has something to
! 735: return.
! 736:
! 737: *This interface is preliminary. It might change incompatibly in
! 738: future revisions.*
! 739:
! 740: - Function: void mpn_random2 (mp_limb_t * R1P, mp_size_t R1SIZE)
! 741: Generate a random number of length R1SIZE with long strings of
! 742: zeros and ones in the binary representation, and store it at R1P.
! 743:
! 744: The generated random numbers are intended for testing the
! 745: correctness of the implementation of the `mpn' routines.
! 746:
! 747: - Function: unsigned long int mpn_popcount (const mp_limb_t * S1P,
! 748: unsigned long int SIZE)
! 749: Count the number of set bits in {S1P, SIZE}.
! 750:
! 751: - Function: unsigned long int mpn_hamdist (const mp_limb_t * S1P,
! 752: const mp_limb_t * S2P, unsigned long int SIZE)
! 753: Compute the hamming distance between {S1P, SIZE} and {S2P, SIZE}.
! 754:
! 755: - Function: int mpn_perfect_square_p (const mp_limb_t * S1P, mp_size_t
! 756: SIZE)
! 757: Return non-zero iff {S1P, SIZE} is a perfect square.
! 758:
! 759:
! 760: File: gmp.info, Node: BSD Compatible Functions, Next: Custom Allocation, Prev: Low-level Functions, Up: Top
! 761:
! 762: Berkeley MP Compatible Functions
! 763: ********************************
! 764:
! 765: These functions are intended to be fully compatible with the
! 766: Berkeley MP library which is available on many BSD derived U*ix systems.
! 767:
! 768: The original Berkeley MP library has a usage restriction: you cannot
! 769: use the same variable as both source and destination in a single
! 770: function call. The compatible functions in GNU MP do not share this
! 771: restriction--inputs and outputs may overlap.
! 772:
! 773: It is not recommended that new programs are written using these
! 774: functions. Apart from the incomplete set of functions, the interface
! 775: for initializing `MINT' objects is more error prone, and the `pow'
! 776: function collides with `pow' in `libm.a'.
! 777:
! 778: Include the header `mp.h' to get the definition of the necessary
! 779: types and functions. If you are on a BSD derived system, make sure to
! 780: include GNU `mp.h' if you are going to link the GNU `libmp.a' to you
! 781: program. This means that you probably need to give the -I<dir> option
! 782: to the compiler, where <dir> is the directory where you have GNU `mp.h'.
! 783:
! 784: - Function: MINT * itom (signed short int INITIAL_VALUE)
! 785: Allocate an integer consisting of a `MINT' object and dynamic limb
! 786: space. Initialize the integer to INITIAL_VALUE. Return a pointer
! 787: to the `MINT' object.
! 788:
! 789: - Function: MINT * xtom (char *INITIAL_VALUE)
! 790: Allocate an integer consisting of a `MINT' object and dynamic limb
! 791: space. Initialize the integer from INITIAL_VALUE, a hexadecimal,
! 792: '\0'-terminate C string. Return a pointer to the `MINT' object.
! 793:
! 794: - Function: void move (MINT *SRC, MINT *DEST)
! 795: Set DEST to SRC by copying. Both variables must be previously
! 796: initialized.
! 797:
! 798: - Function: void madd (MINT *SRC_1, MINT *SRC_2, MINT *DESTINATION)
! 799: Add SRC_1 and SRC_2 and put the sum in DESTINATION.
! 800:
! 801: - Function: void msub (MINT *SRC_1, MINT *SRC_2, MINT *DESTINATION)
! 802: Subtract SRC_2 from SRC_1 and put the difference in DESTINATION.
! 803:
! 804: - Function: void mult (MINT *SRC_1, MINT *SRC_2, MINT *DESTINATION)
! 805: Multiply SRC_1 and SRC_2 and put the product in DESTINATION.
! 806:
! 807: - Function: void mdiv (MINT *DIVIDEND, MINT *DIVISOR, MINT *QUOTIENT,
! 808: MINT *REMAINDER)
! 809: - Function: void sdiv (MINT *DIVIDEND, signed short int DIVISOR, MINT
! 810: *QUOTIENT, signed short int *REMAINDER)
! 811: Set QUOTIENT to DIVIDEND/DIVISOR, and REMAINDER to DIVIDEND mod
! 812: DIVISOR. The quotient is rounded towards zero; the remainder has
! 813: the same sign as the dividend unless it is zero.
! 814:
! 815: Some implementations of these functions work differently--or not
! 816: at all--for negative arguments.
! 817:
! 818: - Function: void msqrt (MINT *OPERAND, MINT *ROOT, MINT *REMAINDER)
! 819: Set ROOT to the truncated integer part of the square root of
! 820: OPERAND. Set REMAINDER to OPERAND-ROOT*ROOT, (i.e., zero if
! 821: OPERAND is a perfect square).
! 822:
! 823: If ROOT and REMAINDER are the same variable, the results are
! 824: undefined.
! 825:
! 826: - Function: void pow (MINT *BASE, MINT *EXP, MINT *MOD, MINT *DEST)
! 827: Set DEST to (BASE raised to EXP) modulo MOD.
! 828:
! 829: - Function: void rpow (MINT *BASE, signed short int EXP, MINT *DEST)
! 830: Set DEST to BASE raised to EXP.
! 831:
! 832: - Function: void gcd (MINT *OPERAND1, MINT *OPERAND2, MINT *RES)
! 833: Set RES to the greatest common divisor of OPERAND1 and OPERAND2.
! 834:
! 835: - Function: int mcmp (MINT *OPERAND1, MINT *OPERAND2)
! 836: Compare OPERAND1 and OPERAND2. Return a positive value if
! 837: OPERAND1 > OPERAND2, zero if OPERAND1 = OPERAND2, and a negative
! 838: value if OPERAND1 < OPERAND2.
! 839:
! 840: - Function: void min (MINT *DEST)
! 841: Input a decimal string from `stdin', and put the read integer in
! 842: DEST. SPC and TAB are allowed in the number string, and are
! 843: ignored.
! 844:
! 845: - Function: void mout (MINT *SRC)
! 846: Output SRC to `stdout', as a decimal string. Also output a
! 847: newline.
! 848:
! 849: - Function: char * mtox (MINT *OPERAND)
! 850: Convert OPERAND to a hexadecimal string, and return a pointer to
! 851: the string. The returned string is allocated using the default
! 852: memory allocation function, `malloc' by default.
! 853:
! 854: - Function: void mfree (MINT *OPERAND)
! 855: De-allocate, the space used by OPERAND. *This function should
! 856: only be passed a value returned by `itom' or `xtom'.*
! 857:
! 858:
! 859: File: gmp.info, Node: Custom Allocation, Next: Contributors, Prev: BSD Compatible Functions, Up: Top
! 860:
! 861: Custom Allocation
! 862: *****************
! 863:
! 864: By default, the MP functions use `malloc', `realloc', and `free' for
! 865: memory allocation. If `malloc' or `realloc' fails, the MP library
! 866: terminates execution after printing a fatal error message to standard
! 867: error.
! 868:
! 869: For some applications, you may wish to allocate memory in other
! 870: ways, or you may not want to have a fatal error when there is no more
! 871: memory available. To accomplish this, you can specify alternative
! 872: memory allocation functions.
! 873:
! 874: - Function: void mp_set_memory_functions (
! 875: void *(*ALLOC_FUNC_PTR) (size_t),
! 876: void *(*REALLOC_FUNC_PTR) (void *, size_t, size_t),
! 877: void (*FREE_FUNC_PTR) (void *, size_t))
! 878: Replace the current allocation functions from the arguments. If
! 879: an argument is NULL, the corresponding default function is
! 880: retained.
! 881:
! 882: *Make sure to call this function in such a way that there are no
! 883: active MP objects that were allocated using the previously active
! 884: allocation function! Usually, that means that you have to call
! 885: this function before any other MP function.*
! 886:
! 887: The functions you supply should fit the following declarations:
! 888:
! 889: - Function: void * allocate_function (size_t ALLOC_SIZE)
! 890: This function should return a pointer to newly allocated space
! 891: with at least ALLOC_SIZE storage units.
! 892:
! 893: - Function: void * reallocate_function (void *PTR, size_t OLD_SIZE,
! 894: size_t NEW_SIZE)
! 895: This function should return a pointer to newly allocated space of
! 896: at least NEW_SIZE storage units, after copying at least the first
! 897: OLD_SIZE storage units from PTR. It should also de-allocate the
! 898: space at PTR.
! 899:
! 900: You can assume that the space at PTR was formerly returned from
! 901: `allocate_function' or `reallocate_function', for a request for
! 902: OLD_SIZE storage units.
! 903:
! 904: - Function: void deallocate_function (void *PTR, size_t SIZE)
! 905: De-allocate the space pointed to by PTR.
! 906:
! 907: You can assume that the space at PTR was formerly returned from
! 908: `allocate_function' or `reallocate_function', for a request for
! 909: SIZE storage units.
! 910:
! 911: (A "storage unit" is the unit in which the `sizeof' operator returns
! 912: the size of an object, normally an 8 bit byte.)
! 913:
! 914:
! 915: File: gmp.info, Node: Contributors, Next: References, Prev: Custom Allocation, Up: Top
! 916:
! 917: Contributors
! 918: ************
! 919:
! 920: I would like to thank Gunnar Sjoedin and Hans Riesel for their help
! 921: with mathematical problems, Richard Stallman for his help with design
! 922: issues and for revising the first version of this manual, Brian Beuning
! 923: and Doug Lea for their testing of early versions of the library.
! 924:
! 925: John Amanatides of York University in Canada contributed the function
! 926: `mpz_probab_prime_p'.
! 927:
! 928: Paul Zimmermann of Inria sparked the development of GMP 2, with his
! 929: comparisons between bignum packages.
! 930:
! 931: Ken Weber (Kent State University, Universidade Federal do Rio Grande
! 932: do Sul) contributed `mpz_gcd', `mpz_divexact', `mpn_gcd', and
! 933: `mpn_bdivmod', partially supported by CNPq (Brazil) grant 301314194-2.
! 934:
! 935: Per Bothner of Cygnus Support helped to set up MP to use Cygnus'
! 936: configure. He has also made valuable suggestions and tested numerous
! 937: intermediary releases.
! 938:
! 939: Joachim Hollman was involved in the design of the `mpf' interface,
! 940: and in the `mpz' design revisions for version 2.
! 941:
! 942: Bennet Yee contributed the functions `mpz_jacobi' and `mpz_legendre'.
! 943:
! 944: Andreas Schwab contributed the files `mpn/m68k/lshift.S' and
! 945: `mpn/m68k/rshift.S'.
! 946:
! 947: The development of floating point functions of GNU MP 2, were
! 948: supported in part by the ESPRIT-BRA (Basic Research Activities) 6846
! 949: project POSSO (POlynomial System SOlving).
! 950:
! 951: GNU MP 2 was finished and released by TMG Datakonsult,
! 952: Sodermannagatan 5, 116 23 STOCKHOLM, SWEDEN, in cooperation with the
! 953: IDA Center for Computing Sciences, USA.
! 954:
! 955:
! 956: File: gmp.info, Node: References, Prev: Contributors, Up: Top
! 957:
! 958: References
! 959: **********
! 960:
! 961: * Donald E. Knuth, "The Art of Computer Programming", vol 2,
! 962: "Seminumerical Algorithms", 2nd edition, Addison-Wesley, 1981.
! 963:
! 964: * John D. Lipson, "Elements of Algebra and Algebraic Computing", The
! 965: Benjamin Cummings Publishing Company Inc, 1981.
! 966:
! 967: * Richard M. Stallman, "Using and Porting GCC", Free Software
! 968: Foundation, 1995.
! 969:
! 970: * Peter L. Montgomery, "Modular Multiplication Without Trial
! 971: Division", in Mathematics of Computation, volume 44, number 170,
! 972: April 1985.
! 973:
! 974: * Torbjorn Granlund and Peter L. Montgomery, "Division by Invariant
! 975: Integers using Multiplication", in Proceedings of the SIGPLAN
! 976: PLDI'94 Conference, June 1994.
! 977:
! 978: * Tudor Jebelean, "An algorithm for exact division", Journal of
! 979: Symbolic Computation, v. 15, 1993, pp. 169-180.
! 980:
! 981: * Kenneth Weber, "The accelerated integer GCD algorithm", ACM
! 982: Transactions on Mathematical Software, v. 21 (March), 1995, pp.
! 983: 111-122.
! 984:
! 985:
! 986: File: gmp.info, Node: Concept Index, Up: Top
! 987:
! 988: Concept Index
! 989: *************
! 990:
! 991: * Menu:
! 992:
! 993: * gmp.h: MP Basics.
! 994: * mp.h: BSD Compatible Functions.
! 995: * Arithmetic functions <1>: Float Arithmetic.
! 996: * Arithmetic functions: Integer Arithmetic.
! 997: * Bit manipulation functions: Integer Logic and Bit Fiddling.
! 998: * BSD MP compatible functions: BSD Compatible Functions.
! 999: * Comparison functions: Float Comparison.
! 1000: * Conditions for copying GNU MP: Copying.
! 1001: * Conversion functions <1>: Converting Integers.
! 1002: * Conversion functions: Converting Floats.
! 1003: * Copying conditions: Copying.
! 1004: * Float arithmetic functions: Float Arithmetic.
! 1005: * Float assignment functions: Assigning Floats.
! 1006: * Float comparisons functions: Float Comparison.
! 1007: * Float functions: Floating-point Functions.
! 1008: * Float input and output functions: I/O of Floats.
! 1009: * Floating-point functions: Floating-point Functions.
! 1010: * Floating-point number: MP Basics.
! 1011: * I/O functions <1>: I/O of Floats.
! 1012: * I/O functions: I/O of Integers.
! 1013: * Initialization and assignment functions <1>: Simultaneous Float Init & Assign.
! 1014: * Initialization and assignment functions: Simultaneous Integer Init & Assign.
! 1015: * Input functions <1>: I/O of Integers.
! 1016: * Input functions: I/O of Floats.
! 1017: * Installation: Installing MP.
! 1018: * Integer: MP Basics.
! 1019: * Integer arithmetic functions: Integer Arithmetic.
! 1020: * Integer assignment functions: Assigning Integers.
! 1021: * Integer conversion functions: Converting Integers.
! 1022: * Integer functions: Integer Functions.
! 1023: * Integer input and output functions: I/O of Integers.
! 1024: * Limb: MP Basics.
! 1025: * Logical functions: Integer Logic and Bit Fiddling.
! 1026: * Low-level functions: Low-level Functions.
! 1027: * Miscellaneous float functions: Miscellaneous Float Functions.
! 1028: * Miscellaneous integer functions: Miscellaneous Integer Functions.
! 1029: * Output functions <1>: I/O of Floats.
! 1030: * Output functions: I/O of Integers.
! 1031: * Rational number: MP Basics.
! 1032: * Rational number functions: Rational Number Functions.
! 1033: * Reporting bugs: Reporting Bugs.
! 1034: * User-defined precision: Floating-point Functions.
! 1035:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to gmp.info-2 CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM / src / kan96xx / gmp-2.0.2