[BACK]Return to Makefile.in CVS log [TXT][DIR] Up to [local] / OpenXM / src / ox_toolkit

Diff for /OpenXM/src/ox_toolkit/Makefile.in between version 1.11 and 1.24

version 1.11, 2000/11/30 18:10:50 version 1.24, 2015/08/04 07:14:46
Line 1 
Line 1 
   # Makefile.in generated by automake 1.11.1 from Makefile.am.
   # @configure_input@
   
   # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   # Inc.
   # This Makefile.in is free software; the Free Software Foundation
   # gives unlimited permission to copy and/or distribute it,
   # with or without modifications, as long as this notice is preserved.
   
   # This program is distributed in the hope that it will be useful,
   # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
   # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
   # PARTICULAR PURPOSE.
   
   @SET_MAKE@
   
 # -*- mode: Makefile -*-  # -*- mode: Makefile -*-
 # $OpenXM: OpenXM/src/ox_toolkit/Makefile.in,v 1.10 2000/11/18 05:48:12 ohara Exp $  
   
 OpenXM_HOME = ../..  
 OXWEAVE     = ${OpenXM_HOME}/bin/oxweave  
 CC          = @CC@  
 CFLAGS      = -g -Wall -O2 -DDEBUG -I${OpenXM_HOME}/include -finline-functions  
 OBJS        = ox.o cmo.o parse.o mysocket.o mathcap.o dump.o cmolen.o print.o oxf.o oxf_old.o  
 BINARIES    = bconv testclient sample1 sample2 zclient  
 DOCUMENTS   = readme-en.txt readme-ja.txt bnf-en.txt bnf-ja.txt  
 X11INC      = @X_CFLAGS@  
 X11LIB      = @X_LIBS@ @X_PRE_LIBS@ -lX11 @X_EXTRA_LIBS@  
 RANLIB      = @RANLIB@  
 LIBS        = @LIBS@ -L${OpenXM_HOME}/lib -L. -lox -lgmp  
 INSTALL_DATA= cp -f  
 OXOBJS      = ${OBJS} bconv.o testclinet.o ox_Xsample.o sample1.o sample2.o  
   
 all: libox.a ${BINARIES} ${DOCUMENTS}  
   
 all2: all ox_Xsample  
   
 ox.o mysocket.o: mysocket.h  VPATH = @srcdir@
 ox.o parse.o:    parse.h  pkgdatadir = $(datadir)/@PACKAGE@
 ${OXOBJS}:       ox_toolkit.h  pkgincludedir = $(includedir)/@PACKAGE@
   pkglibdir = $(libdir)/@PACKAGE@
   pkglibexecdir = $(libexecdir)/@PACKAGE@
   am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
   install_sh_DATA = $(install_sh) -c -m 644
   install_sh_PROGRAM = $(install_sh) -c
   install_sh_SCRIPT = $(install_sh) -c
   INSTALL_HEADER = $(INSTALL_DATA)
   transform = $(program_transform_name)
   NORMAL_INSTALL = :
   PRE_INSTALL = :
   POST_INSTALL = :
   NORMAL_UNINSTALL = :
   PRE_UNINSTALL = :
   POST_UNINSTALL = :
   build_triplet = @build@
   host_triplet = @host@
   target_triplet = @target@
   noinst_PROGRAMS = bconv$(EXEEXT) testclient$(EXEEXT) sample1$(EXEEXT) \
           sample2$(EXEEXT) zclient$(EXEEXT) ox_Xsample$(EXEEXT)
   subdir = .
   DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
           $(noinst_HEADERS) $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
           $(top_srcdir)/configure compile config.guess config.sub \
           install-sh ltconfig ltmain.sh missing mkinstalldirs
   ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
   am__aclocal_m4_deps = $(top_srcdir)/configure.in
   am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
           $(ACLOCAL_M4)
   am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
    configure.lineno config.status.lineno
   mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
   CONFIG_CLEAN_FILES =
   CONFIG_CLEAN_VPATH_FILES =
   am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
   am__vpath_adj = case $$p in \
       $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
       *) f=$$p;; \
     esac;
   am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
   am__install_max = 40
   am__nobase_strip_setup = \
     srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
   am__nobase_strip = \
     for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
   am__nobase_list = $(am__nobase_strip_setup); \
     for p in $$list; do echo "$$p $$p"; done | \
     sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
     $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
       if (++n[$$2] == $(am__install_max)) \
         { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
       END { for (dir in files) print dir, files[dir] }'
   am__base_list = \
     sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
     sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
   am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)" \
           "$(DESTDIR)$(includedir)"
   LTLIBRARIES = $(lib_LTLIBRARIES)
   libox_la_LIBADD =
   am_libox_la_OBJECTS = ox.lo cmo.lo parse.lo mysocket.lo mathcap.lo \
           dump.lo cmolen.lo print.lo oxf.lo oxf_old.lo
   libox_la_OBJECTS = $(am_libox_la_OBJECTS)
   libox_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
           --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libox_la_LDFLAGS) \
           $(LDFLAGS) -o $@
   PROGRAMS = $(noinst_PROGRAMS)
   am_bconv_OBJECTS = bconv.$(OBJEXT)
   bconv_OBJECTS = $(am_bconv_OBJECTS)
   am__DEPENDENCIES_1 = ./libox.la
   bconv_DEPENDENCIES = $(am__DEPENDENCIES_1)
   am_ox_Xsample_OBJECTS = ox_Xsample.$(OBJEXT) glib.$(OBJEXT)
   ox_Xsample_OBJECTS = $(am_ox_Xsample_OBJECTS)
   am__DEPENDENCIES_2 =
   am__DEPENDENCIES_3 = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_2) \
           $(am__DEPENDENCIES_2)
   ox_Xsample_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_3)
   am_sample1_OBJECTS = sample1.$(OBJEXT)
   sample1_OBJECTS = $(am_sample1_OBJECTS)
   sample1_DEPENDENCIES = $(am__DEPENDENCIES_1)
   am_sample2_OBJECTS = sample2.$(OBJEXT)
   sample2_OBJECTS = $(am_sample2_OBJECTS)
   sample2_DEPENDENCIES = $(am__DEPENDENCIES_1)
   am_testclient_OBJECTS = testclient.$(OBJEXT)
   testclient_OBJECTS = $(am_testclient_OBJECTS)
   testclient_DEPENDENCIES = $(am__DEPENDENCIES_1)
   am_zclient_OBJECTS = zclient.$(OBJEXT)
   zclient_OBJECTS = $(am_zclient_OBJECTS)
   zclient_DEPENDENCIES = $(am__DEPENDENCIES_1)
   DEFAULT_INCLUDES = -I.@am__isrc@
   depcomp =
   am__depfiles_maybe =
   COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
           $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
   LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
           --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
           $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
   CCLD = $(CC)
   LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
           --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
           $(LDFLAGS) -o $@
   SOURCES = $(libox_la_SOURCES) $(bconv_SOURCES) $(ox_Xsample_SOURCES) \
           $(sample1_SOURCES) $(sample2_SOURCES) $(testclient_SOURCES) \
           $(zclient_SOURCES)
   DIST_SOURCES = $(libox_la_SOURCES) $(bconv_SOURCES) \
           $(ox_Xsample_SOURCES) $(sample1_SOURCES) $(sample2_SOURCES) \
           $(testclient_SOURCES) $(zclient_SOURCES)
   DATA = $(doc_DATA)
   HEADERS = $(include_HEADERS) $(noinst_HEADERS)
   ETAGS = etags
   CTAGS = ctags
   DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
   distdir = $(PACKAGE)-$(VERSION)
   top_distdir = $(distdir)
   am__remove_distdir = \
     { test ! -d "$(distdir)" \
       || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
            && rm -fr "$(distdir)"; }; }
   DIST_ARCHIVES = $(distdir).tar.gz
   GZIP_ENV = --best
   distuninstallcheck_listfiles = find . -type f -print
   distcleancheck_listfiles = find . -type f -print
   ACLOCAL = @ACLOCAL@
   AMTAR = @AMTAR@
   AR = @AR@
   AUTOCONF = @AUTOCONF@
   AUTOHEADER = @AUTOHEADER@
   AUTOMAKE = @AUTOMAKE@
   AWK = @AWK@
   CC = @CC@
   CCDEPMODE = @CCDEPMODE@
   CFLAGS = @CFLAGS@
   CPP = @CPP@
   CPPFLAGS = @CPPFLAGS@
   CYGPATH_W = @CYGPATH_W@
   DEFS = @DEFS@
   DEPDIR = @DEPDIR@
   DLLTOOL = @DLLTOOL@
   DSYMUTIL = @DSYMUTIL@
   DUMPBIN = @DUMPBIN@
   ECHO_C = @ECHO_C@
   ECHO_N = @ECHO_N@
   ECHO_T = @ECHO_T@
   EGREP = @EGREP@
   EXEEXT = @EXEEXT@
   FGREP = @FGREP@
   GREP = @GREP@
   INSTALL = @INSTALL@
   INSTALL_DATA = @INSTALL_DATA@
   INSTALL_PROGRAM = @INSTALL_PROGRAM@
   INSTALL_SCRIPT = @INSTALL_SCRIPT@
   INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
   LD = @LD@
   LDFLAGS = @LDFLAGS@
   LIBOBJS = @LIBOBJS@
   LIBS = @LIBS@
   LIBTOOL = @LIBTOOL@
   LIPO = @LIPO@
   LN_S = @LN_S@
   LTLIBOBJS = @LTLIBOBJS@
   MAINT = @MAINT@
   MAKEINFO = @MAKEINFO@
   MANIFEST_TOOL = @MANIFEST_TOOL@
   MKDIR_P = @MKDIR_P@
   NM = @NM@
   NMEDIT = @NMEDIT@
   OBJDUMP = @OBJDUMP@
   OBJEXT = @OBJEXT@
   OTOOL = @OTOOL@
   OTOOL64 = @OTOOL64@
   PACKAGE = @PACKAGE@
   PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
   PACKAGE_NAME = @PACKAGE_NAME@
   PACKAGE_STRING = @PACKAGE_STRING@
   PACKAGE_TARNAME = @PACKAGE_TARNAME@
   PACKAGE_URL = @PACKAGE_URL@
   PACKAGE_VERSION = @PACKAGE_VERSION@
   PATH_SEPARATOR = @PATH_SEPARATOR@
   RANLIB = @RANLIB@
   SED = @SED@
   SET_MAKE = @SET_MAKE@
   SHELL = @SHELL@
   STRIP = @STRIP@
   VERSION = @VERSION@
   XMKMF = @XMKMF@
   X_CFLAGS = @X_CFLAGS@
   X_EXTRA_LIBS = @X_EXTRA_LIBS@
   X_LIBS = @X_LIBS@
   X_PRE_LIBS = @X_PRE_LIBS@
   abs_builddir = @abs_builddir@
   abs_srcdir = @abs_srcdir@
   abs_top_builddir = @abs_top_builddir@
   abs_top_srcdir = @abs_top_srcdir@
   ac_ct_AR = @ac_ct_AR@
   ac_ct_CC = @ac_ct_CC@
   ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
   am__include = @am__include@
   am__leading_dot = @am__leading_dot@
   am__quote = @am__quote@
   am__tar = @am__tar@
   am__untar = @am__untar@
   bindir = @bindir@
   build = @build@
   build_alias = @build_alias@
   build_cpu = @build_cpu@
   build_os = @build_os@
   build_vendor = @build_vendor@
   builddir = @builddir@
   datadir = @datadir@
   datarootdir = @datarootdir@
   docdir = ${prefix}/doc/ox_toolkit
   dvidir = @dvidir@
   exec_prefix = @exec_prefix@
   host = @host@
   host_alias = @host_alias@
   host_cpu = @host_cpu@
   host_os = @host_os@
   host_vendor = @host_vendor@
   htmldir = @htmldir@
   includedir = @includedir@
   infodir = @infodir@
   install_sh = @install_sh@
   libdir = @libdir@
   libexecdir = @libexecdir@
   localedir = @localedir@
   localstatedir = @localstatedir@
   mandir = @mandir@
   mkdir_p = @mkdir_p@
   oldincludedir = @oldincludedir@
   pdfdir = @pdfdir@
   prefix = @prefix@
   program_transform_name = @program_transform_name@
   psdir = @psdir@
   sbindir = @sbindir@
   sharedstatedir = @sharedstatedir@
   srcdir = @srcdir@
   sysconfdir = @sysconfdir@
   target = @target@
   target_alias = @target_alias@
   target_cpu = @target_cpu@
   target_os = @target_os@
   target_vendor = @target_vendor@
   top_build_prefix = @top_build_prefix@
   top_builddir = @top_builddir@
   top_srcdir = @top_srcdir@
   AUTOMAKE_OPTIONS = foreign no-dependencies 1.5
   OXWEAVE = ${prefix}/bin/oxweave
   INCLUDES = @X_CFLAGS@ -I${prefix}/include
   OXLIBS = -L${prefix}/lib ./libox.la -lgc -lmpfr -lgmp
   XLIBS = ${X_LIBS} ${X_PRE_LIBS} -lX11 ${X_EXTRA_LIBS}
   DOCUMENTS = readme-en.txt readme-ja.txt bnf-en.txt bnf-ja.txt
   CLEANFILES = ${DOCUMENTS}
   DISTCLEANFILES = .configure_done
   doc_DATA = ${DOCUMENTS}
   include_HEADERS = ox_toolkit.h
   noinst_HEADERS = mysocket.h parse.h
   bconv_SOURCES = bconv.c ox_toolkit.h
   sample1_SOURCES = sample1.c ox_toolkit.h
   sample2_SOURCES = sample2.c ox_toolkit.h
   zclient_SOURCES = zclient.c ox_toolkit.h
   testclient_SOURCES = testclient.c ox_toolkit.h
   ox_Xsample_SOURCES = ox_Xsample.c glib.c ox_toolkit.h
   bconv_LDADD = ${OXLIBS}
   sample1_LDADD = ${OXLIBS}
   sample2_LDADD = ${OXLIBS}
   zclient_LDADD = ${OXLIBS}
   testclient_LDADD = ${OXLIBS}
   ox_Xsample_LDADD = ${OXLIBS} ${XLIBS}
   lib_LTLIBRARIES = libox.la
   libox_la_LDFLAGS = --version-info 0:0:0
   libox_la_SOURCES = ox.c cmo.c parse.c mysocket.c mathcap.c dump.c \
                        cmolen.c print.c oxf.c oxf_old.c \
                        ox_toolkit.h mysocket.h parse.h
   
 libox.a: ${OBJS}  all: all-am
         -rm -f $@  
         ar -rc $@ ${OBJS}  
         ${RANLIB} $@  
   
 bconv: bconv.o libox.a  .SUFFIXES:
         ${CC} ${CFLAGS} -o $@ bconv.o ${LIBS}  .SUFFIXES: .c .lo .o .obj
   am--refresh:
           @:
   $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
           @for dep in $?; do \
             case '$(am__configure_deps)' in \
               *$$dep*) \
                 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
                 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
                   && exit 0; \
                 exit 1;; \
             esac; \
           done; \
           echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
           $(am__cd) $(top_srcdir) && \
             $(AUTOMAKE) --foreign Makefile
   .PRECIOUS: Makefile
   Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
           @case '$?' in \
             *config.status*) \
               echo ' $(SHELL) ./config.status'; \
               $(SHELL) ./config.status;; \
             *) \
               echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
               cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
           esac;
   
 testclient: testclient.o libox.a  $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
         ${CC} ${CFLAGS} -o $@ testclient.o ${LIBS}          $(SHELL) ./config.status --recheck
   
 zclient: zclient.o libox.a  $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
         ${CC} ${CFLAGS} -o $@ zclient.o ${LIBS}          $(am__cd) $(srcdir) && $(AUTOCONF)
   $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
           $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
   $(am__aclocal_m4_deps):
   install-libLTLIBRARIES: $(lib_LTLIBRARIES)
           @$(NORMAL_INSTALL)
           test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
           @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
           list2=; for p in $$list; do \
             if test -f $$p; then \
               list2="$$list2 $$p"; \
             else :; fi; \
           done; \
           test -z "$$list2" || { \
             echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
             $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
           }
   
 sample1: sample1.o libox.a  uninstall-libLTLIBRARIES:
         ${CC} ${CFLAGS} -o $@ sample1.o ${LIBS}          @$(NORMAL_UNINSTALL)
           @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
           for p in $$list; do \
             $(am__strip_dir) \
             echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
             $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
           done
   
 sample2: sample2.o libox.a  clean-libLTLIBRARIES:
         ${CC} ${CFLAGS} -o $@ sample2.o ${LIBS}          -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
           @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
             dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
             test "$$dir" != "$$p" || dir=.; \
             echo "rm -f \"$${dir}/so_locations\""; \
             rm -f "$${dir}/so_locations"; \
           done
   libox.la: $(libox_la_OBJECTS) $(libox_la_DEPENDENCIES)
           $(libox_la_LINK) -rpath $(libdir) $(libox_la_OBJECTS) $(libox_la_LIBADD) $(LIBS)
   
 ox_Xsample: ox_Xsample.o glib.c libox.a  clean-noinstPROGRAMS:
         ${CC} ${CFLAGS} ${X11INC} -o $@ ox_Xsample.o glib.c ${LIBS} ${X11LIB}          @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
           echo " rm -f" $$list; \
           rm -f $$list || exit $$?; \
           test -n "$(EXEEXT)" || exit 0; \
           list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
           echo " rm -f" $$list; \
           rm -f $$list
   bconv$(EXEEXT): $(bconv_OBJECTS) $(bconv_DEPENDENCIES)
           @rm -f bconv$(EXEEXT)
           $(LINK) $(bconv_OBJECTS) $(bconv_LDADD) $(LIBS)
   ox_Xsample$(EXEEXT): $(ox_Xsample_OBJECTS) $(ox_Xsample_DEPENDENCIES)
           @rm -f ox_Xsample$(EXEEXT)
           $(LINK) $(ox_Xsample_OBJECTS) $(ox_Xsample_LDADD) $(LIBS)
   sample1$(EXEEXT): $(sample1_OBJECTS) $(sample1_DEPENDENCIES)
           @rm -f sample1$(EXEEXT)
           $(LINK) $(sample1_OBJECTS) $(sample1_LDADD) $(LIBS)
   sample2$(EXEEXT): $(sample2_OBJECTS) $(sample2_DEPENDENCIES)
           @rm -f sample2$(EXEEXT)
           $(LINK) $(sample2_OBJECTS) $(sample2_LDADD) $(LIBS)
   testclient$(EXEEXT): $(testclient_OBJECTS) $(testclient_DEPENDENCIES)
           @rm -f testclient$(EXEEXT)
           $(LINK) $(testclient_OBJECTS) $(testclient_LDADD) $(LIBS)
   zclient$(EXEEXT): $(zclient_OBJECTS) $(zclient_DEPENDENCIES)
           @rm -f zclient$(EXEEXT)
           $(LINK) $(zclient_OBJECTS) $(zclient_LDADD) $(LIBS)
   
 mctest: mctest.o libox.a  mostlyclean-compile:
         ${CC} ${CFLAGS} -o $@ mctest.o ${LIBS}          -rm -f *.$(OBJEXT)
   
 readme-ja.txt: README  distclean-compile:
         ${OXWEAVE} ja common < README > readme-ja.txt          -rm -f *.tab.c
   
 readme-en.txt: README  .c.o:
         ${OXWEAVE} en common < README > readme-en.txt          $(COMPILE) -c $<
   
 bnf-ja.txt: bnf.oxweave  .c.obj:
         ${OXWEAVE} ja common < bnf.oxweave > bnf-ja.txt          $(COMPILE) -c `$(CYGPATH_W) '$<'`
   
 bnf-en.txt: bnf.oxweave  .c.lo:
         ${OXWEAVE} en common < bnf.oxweave > bnf-en.txt          $(LTCOMPILE) -c -o $@ $<
   
 install: install-document install-binary  mostlyclean-libtool:
           -rm -f *.lo
   
 install-binary: libox.a ox_toolkit.h  clean-libtool:
         -if [ ! -d ${OpenXM_HOME}/lib ]; then \          -rm -rf .libs _libs
                 mkdir -p ${OpenXM_HOME}/lib ;\  
   distclean-libtool:
           -rm -f libtool config.lt
   install-docDATA: $(doc_DATA)
           @$(NORMAL_INSTALL)
           test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
           @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
           for p in $$list; do \
             if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
             echo "$$d$$p"; \
           done | $(am__base_list) | \
           while read files; do \
             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
             $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
           done
   
   uninstall-docDATA:
           @$(NORMAL_UNINSTALL)
           @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
           files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
           test -n "$$files" || exit 0; \
           echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \
           cd "$(DESTDIR)$(docdir)" && rm -f $$files
   install-includeHEADERS: $(include_HEADERS)
           @$(NORMAL_INSTALL)
           test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
           @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
           for p in $$list; do \
             if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
             echo "$$d$$p"; \
           done | $(am__base_list) | \
           while read files; do \
             echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
             $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
           done
   
   uninstall-includeHEADERS:
           @$(NORMAL_UNINSTALL)
           @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
           files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
           test -n "$$files" || exit 0; \
           echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
           cd "$(DESTDIR)$(includedir)" && rm -f $$files
   
   ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
           list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
           unique=`for i in $$list; do \
               if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
             done | \
             $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
                 END { if (nonempty) { for (i in files) print i; }; }'`; \
           mkid -fID $$unique
   tags: TAGS
   
   TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                   $(TAGS_FILES) $(LISP)
           set x; \
           here=`pwd`; \
           list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
           unique=`for i in $$list; do \
               if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
             done | \
             $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
                 END { if (nonempty) { for (i in files) print i; }; }'`; \
           shift; \
           if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
             test -n "$$unique" || unique=$$empty_fix; \
             if test $$# -gt 0; then \
               $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
                 "$$@" $$unique; \
             else \
               $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
                 $$unique; \
             fi; \
         fi          fi
         -if [ ! -d ${OpenXM_HOME}/include ]; then \  ctags: CTAGS
                 mkdir -p ${OpenXM_HOME}/include ;\  CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                   $(TAGS_FILES) $(LISP)
           list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
           unique=`for i in $$list; do \
               if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
             done | \
             $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
                 END { if (nonempty) { for (i in files) print i; }; }'`; \
           test -z "$(CTAGS_ARGS)$$unique" \
             || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
                $$unique
   
   GTAGS:
           here=`$(am__cd) $(top_builddir) && pwd` \
             && $(am__cd) $(top_srcdir) \
             && gtags -i $(GTAGS_ARGS) "$$here"
   
   distclean-tags:
           -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
   
   distdir: $(DISTFILES)
           $(am__remove_distdir)
           test -d "$(distdir)" || mkdir "$(distdir)"
           @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
           topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
           list='$(DISTFILES)'; \
             dist_files=`for file in $$list; do echo $$file; done | \
             sed -e "s|^$$srcdirstrip/||;t" \
                 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
           case $$dist_files in \
             */*) $(MKDIR_P) `echo "$$dist_files" | \
                              sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
                              sort -u` ;; \
           esac; \
           for file in $$dist_files; do \
             if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
             if test -d $$d/$$file; then \
               dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
               if test -d "$(distdir)/$$file"; then \
                 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
               fi; \
               if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
                 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
                 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
               fi; \
               cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
             else \
               test -f "$(distdir)/$$file" \
               || cp -p $$d/$$file "$(distdir)/$$file" \
               || exit 1; \
             fi; \
           done
           -test -n "$(am__skip_mode_fix)" \
           || find "$(distdir)" -type d ! -perm -755 \
                   -exec chmod u+rwx,go+rx {} \; -o \
             ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
             ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
             ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
           || chmod -R a+r "$(distdir)"
   dist-gzip: distdir
           tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
           $(am__remove_distdir)
   
   dist-bzip2: distdir
           tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
           $(am__remove_distdir)
   
   dist-lzma: distdir
           tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
           $(am__remove_distdir)
   
   dist-xz: distdir
           tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
           $(am__remove_distdir)
   
   dist-tarZ: distdir
           tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
           $(am__remove_distdir)
   
   dist-shar: distdir
           shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
           $(am__remove_distdir)
   
   dist-zip: distdir
           -rm -f $(distdir).zip
           zip -rq $(distdir).zip $(distdir)
           $(am__remove_distdir)
   
   dist dist-all: distdir
           tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
           $(am__remove_distdir)
   
   # This target untars the dist file and tries a VPATH configuration.  Then
   # it guarantees that the distribution is self-contained by making another
   # tarfile.
   distcheck: dist
           case '$(DIST_ARCHIVES)' in \
           *.tar.gz*) \
             GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
           *.tar.bz2*) \
             bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
           *.tar.lzma*) \
             lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
           *.tar.xz*) \
             xz -dc $(distdir).tar.xz | $(am__untar) ;;\
           *.tar.Z*) \
             uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
           *.shar.gz*) \
             GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
           *.zip*) \
             unzip $(distdir).zip ;;\
           esac
           chmod -R a-w $(distdir); chmod a+w $(distdir)
           mkdir $(distdir)/_build
           mkdir $(distdir)/_inst
           chmod a-w $(distdir)
           test -d $(distdir)/_build || exit 0; \
           dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
             && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
             && am__cwd=`pwd` \
             && $(am__cd) $(distdir)/_build \
             && ../configure --srcdir=.. --prefix="$$dc_install_base" \
               $(DISTCHECK_CONFIGURE_FLAGS) \
             && $(MAKE) $(AM_MAKEFLAGS) \
             && $(MAKE) $(AM_MAKEFLAGS) dvi \
             && $(MAKE) $(AM_MAKEFLAGS) check \
             && $(MAKE) $(AM_MAKEFLAGS) install \
             && $(MAKE) $(AM_MAKEFLAGS) installcheck \
             && $(MAKE) $(AM_MAKEFLAGS) uninstall \
             && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
                   distuninstallcheck \
             && chmod -R a-w "$$dc_install_base" \
             && ({ \
                  (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
                  && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
                  && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
                  && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
                       distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
                 } || { rm -rf "$$dc_destdir"; exit 1; }) \
             && rm -rf "$$dc_destdir" \
             && $(MAKE) $(AM_MAKEFLAGS) dist \
             && rm -rf $(DIST_ARCHIVES) \
             && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
             && cd "$$am__cwd" \
             || exit 1
           $(am__remove_distdir)
           @(echo "$(distdir) archives ready for distribution: "; \
             list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
             sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
   distuninstallcheck:
           @$(am__cd) '$(distuninstallcheck_dir)' \
           && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
              || { echo "ERROR: files left after uninstall:" ; \
                   if test -n "$(DESTDIR)"; then \
                     echo "  (check DESTDIR support)"; \
                   fi ; \
                   $(distuninstallcheck_listfiles) ; \
                   exit 1; } >&2
   distcleancheck: distclean
           @if test '$(srcdir)' = . ; then \
             echo "ERROR: distcleancheck can only run from a VPATH build" ; \
             exit 1 ; \
         fi          fi
         ${INSTALL_DATA} libox.a ${OpenXM_HOME}/lib          @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
         ${INSTALL_DATA} ox_toolkit.h ${OpenXM_HOME}/include            || { echo "ERROR: files left in build directory after distclean:" ; \
                  $(distcleancheck_listfiles) ; \
                  exit 1; } >&2
   check-am: all-am
   check: check-am
   all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(DATA) $(HEADERS)
   installdirs:
           for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(includedir)"; do \
             test -z "$$dir" || $(MKDIR_P) "$$dir"; \
           done
   install: install-am
   install-exec: install-exec-am
   install-data: install-data-am
   uninstall: uninstall-am
   
 install-for-debug:  install-am: all-am
         @echo "No binaries are installed."          @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
   
 install-document: ${DOCUMENTS}  installcheck: installcheck-am
         -mkdir ${OpenXM_HOME}/doc/ox_toolkit  install-strip:
         ${INSTALL_DATA} ${DOCUMENTS} ${OpenXM_HOME}/doc/ox_toolkit          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
             `test -z '$(STRIP)' || \
               echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
   mostlyclean-generic:
   
 clean-document:  clean-generic:
         -rm -f ${DOCUMENTS}          -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
   
 clean-binary:  distclean-generic:
         -rm -f *.o *~ libox.a ${BINARIES} ox_Xsample core a.out          -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
           -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
           -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
   
 clean: clean-document clean-binary  maintainer-clean-generic:
           @echo "This command is intended for maintainers to use"
           @echo "it deletes files that may require special tools to rebuild."
   clean: clean-am
   
 distclean: clean  clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
         -rm -f .configure_done configure config.cache config.log config.status Makefile          clean-noinstPROGRAMS mostlyclean-am
   
   distclean: distclean-am
           -rm -f $(am__CONFIG_DISTCLEAN_FILES)
           -rm -f Makefile
   distclean-am: clean-am distclean-compile distclean-generic \
           distclean-libtool distclean-tags
   
   dvi: dvi-am
   
   dvi-am:
   
   html: html-am
   
   html-am:
   
   info: info-am
   
   info-am:
   
   install-data-am: install-docDATA install-includeHEADERS
   
   install-dvi: install-dvi-am
   
   install-dvi-am:
   
   install-exec-am: install-libLTLIBRARIES
   
   install-html: install-html-am
   
   install-html-am:
   
   install-info: install-info-am
   
   install-info-am:
   
   install-man:
   
   install-pdf: install-pdf-am
   
   install-pdf-am:
   
   install-ps: install-ps-am
   
   install-ps-am:
   
   installcheck-am:
   
   maintainer-clean: maintainer-clean-am
           -rm -f $(am__CONFIG_DISTCLEAN_FILES)
           -rm -rf $(top_srcdir)/autom4te.cache
           -rm -f Makefile
   maintainer-clean-am: distclean-am maintainer-clean-generic
   
   mostlyclean: mostlyclean-am
   
   mostlyclean-am: mostlyclean-compile mostlyclean-generic \
           mostlyclean-libtool
   
   pdf: pdf-am
   
   pdf-am:
   
   ps: ps-am
   
   ps-am:
   
   uninstall-am: uninstall-docDATA uninstall-includeHEADERS \
           uninstall-libLTLIBRARIES
   
   .MAKE: install-am install-strip
   
   .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
           clean-generic clean-libLTLIBRARIES clean-libtool \
           clean-noinstPROGRAMS ctags dist dist-all dist-bzip2 dist-gzip \
           dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
           distclean distclean-compile distclean-generic \
           distclean-libtool distclean-tags distcleancheck distdir \
           distuninstallcheck dvi dvi-am html html-am info info-am \
           install install-am install-data install-data-am \
           install-docDATA install-dvi install-dvi-am install-exec \
           install-exec-am install-html install-html-am \
           install-includeHEADERS install-info install-info-am \
           install-libLTLIBRARIES install-man install-pdf install-pdf-am \
           install-ps install-ps-am install-strip installcheck \
           installcheck-am installdirs maintainer-clean \
           maintainer-clean-generic mostlyclean mostlyclean-compile \
           mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
           tags uninstall uninstall-am uninstall-docDATA \
           uninstall-includeHEADERS uninstall-libLTLIBRARIES
   
   
   readme-ja.txt: README
           ${OXWEAVE} ja common < README > readme-ja.txt
   
   readme-en.txt: README
           ${OXWEAVE} en common < README > readme-en.txt
   
   bnf-ja.txt: bnf.oxweave
           ${OXWEAVE} ja common < bnf.oxweave > bnf-ja.txt
   
   bnf-en.txt: bnf.oxweave
           ${OXWEAVE} en common < bnf.oxweave > bnf-en.txt
   
   # Tell versions [3.59,3.63) of GNU make to not export all variables.
   # Otherwise a system limit (for SysV at least) may be exceeded.
   .NOEXPORT:

Legend:
Removed from v.1.11  
changed lines
  Added in v.1.24

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>