Annotation of OpenXM/src/ox_toolkit/Makefile.in, Revision 1.22
1.22 ! ohara 1: # Makefile.in generated by automake 1.10 from Makefile.am.
! 2: # @configure_input@
1.1 ohara 3:
1.22 ! ohara 4: # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
! 5: # 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
1.18 ohara 6: # This Makefile.in is free software; the Free Software Foundation
7: # gives unlimited permission to copy and/or distribute it,
8: # with or without modifications, as long as this notice is preserved.
9:
10: # This program is distributed in the hope that it will be useful,
11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13: # PARTICULAR PURPOSE.
1.17 ohara 14:
1.18 ohara 15: @SET_MAKE@
1.17 ohara 16:
1.18 ohara 17: # -*- mode: Makefile -*-
1.1 ohara 18:
19:
1.22 ! ohara 20:
! 21:
1.18 ohara 22: VPATH = @srcdir@
23: pkgdatadir = $(datadir)/@PACKAGE@
24: pkglibdir = $(libdir)/@PACKAGE@
25: pkgincludedir = $(includedir)/@PACKAGE@
1.22 ! ohara 26: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 27: install_sh_DATA = $(install_sh) -c -m 644
! 28: install_sh_PROGRAM = $(install_sh) -c
! 29: install_sh_SCRIPT = $(install_sh) -c
1.18 ohara 30: INSTALL_HEADER = $(INSTALL_DATA)
1.22 ! ohara 31: transform = $(program_transform_name)
1.18 ohara 32: NORMAL_INSTALL = :
33: PRE_INSTALL = :
34: POST_INSTALL = :
35: NORMAL_UNINSTALL = :
36: PRE_UNINSTALL = :
37: POST_UNINSTALL = :
38: build_triplet = @build@
39: host_triplet = @host@
40: target_triplet = @target@
1.22 ! ohara 41: noinst_PROGRAMS = bconv$(EXEEXT) testclient$(EXEEXT) sample1$(EXEEXT) \
! 42: sample2$(EXEEXT) zclient$(EXEEXT) ox_Xsample$(EXEEXT)
! 43: subdir = .
! 44: DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
! 45: $(noinst_HEADERS) $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
! 46: $(top_srcdir)/configure config.guess config.sub install-sh \
! 47: ltmain.sh missing
! 48: ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
! 49: am__aclocal_m4_deps = $(top_srcdir)/configure.in
! 50: am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
! 51: $(ACLOCAL_M4)
! 52: am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
! 53: configure.lineno config.status.lineno
! 54: mkinstalldirs = $(install_sh) -d
! 55: CONFIG_CLEAN_FILES =
! 56: am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
! 57: am__vpath_adj = case $$p in \
! 58: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
! 59: *) f=$$p;; \
! 60: esac;
! 61: am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
! 62: am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)" \
! 63: "$(DESTDIR)$(includedir)"
! 64: libLTLIBRARIES_INSTALL = $(INSTALL)
! 65: LTLIBRARIES = $(lib_LTLIBRARIES)
! 66: libox_la_LIBADD =
! 67: am_libox_la_OBJECTS = ox.lo cmo.lo parse.lo mysocket.lo mathcap.lo \
! 68: dump.lo cmolen.lo print.lo oxf.lo oxf_old.lo
! 69: libox_la_OBJECTS = $(am_libox_la_OBJECTS)
! 70: libox_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
! 71: --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libox_la_LDFLAGS) \
! 72: $(LDFLAGS) -o $@
! 73: PROGRAMS = $(noinst_PROGRAMS)
! 74: am_bconv_OBJECTS = bconv.$(OBJEXT)
! 75: bconv_OBJECTS = $(am_bconv_OBJECTS)
! 76: am__DEPENDENCIES_1 = ./libox.la
! 77: bconv_DEPENDENCIES = $(am__DEPENDENCIES_1)
! 78: am_ox_Xsample_OBJECTS = ox_Xsample.$(OBJEXT) glib.$(OBJEXT)
! 79: ox_Xsample_OBJECTS = $(am_ox_Xsample_OBJECTS)
! 80: am__DEPENDENCIES_2 =
! 81: am__DEPENDENCIES_3 = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_2) \
! 82: $(am__DEPENDENCIES_2)
! 83: ox_Xsample_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_3)
! 84: am_sample1_OBJECTS = sample1.$(OBJEXT)
! 85: sample1_OBJECTS = $(am_sample1_OBJECTS)
! 86: sample1_DEPENDENCIES = $(am__DEPENDENCIES_1)
! 87: am_sample2_OBJECTS = sample2.$(OBJEXT)
! 88: sample2_OBJECTS = $(am_sample2_OBJECTS)
! 89: sample2_DEPENDENCIES = $(am__DEPENDENCIES_1)
! 90: am_testclient_OBJECTS = testclient.$(OBJEXT)
! 91: testclient_OBJECTS = $(am_testclient_OBJECTS)
! 92: testclient_DEPENDENCIES = $(am__DEPENDENCIES_1)
! 93: am_zclient_OBJECTS = zclient.$(OBJEXT)
! 94: zclient_OBJECTS = $(am_zclient_OBJECTS)
! 95: zclient_DEPENDENCIES = $(am__DEPENDENCIES_1)
! 96: DEFAULT_INCLUDES = -I.@am__isrc@
! 97: depcomp =
! 98: am__depfiles_maybe =
! 99: COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
! 100: $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
! 101: LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
! 102: --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
! 103: $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
! 104: CCLD = $(CC)
! 105: LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
! 106: --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
! 107: $(LDFLAGS) -o $@
! 108: SOURCES = $(libox_la_SOURCES) $(bconv_SOURCES) $(ox_Xsample_SOURCES) \
! 109: $(sample1_SOURCES) $(sample2_SOURCES) $(testclient_SOURCES) \
! 110: $(zclient_SOURCES)
! 111: DIST_SOURCES = $(libox_la_SOURCES) $(bconv_SOURCES) \
! 112: $(ox_Xsample_SOURCES) $(sample1_SOURCES) $(sample2_SOURCES) \
! 113: $(testclient_SOURCES) $(zclient_SOURCES)
! 114: docDATA_INSTALL = $(INSTALL_DATA)
! 115: DATA = $(doc_DATA)
! 116: includeHEADERS_INSTALL = $(INSTALL_HEADER)
! 117: HEADERS = $(include_HEADERS) $(noinst_HEADERS)
! 118: ETAGS = etags
! 119: CTAGS = ctags
! 120: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 121: distdir = $(PACKAGE)-$(VERSION)
! 122: top_distdir = $(distdir)
! 123: am__remove_distdir = \
! 124: { test ! -d $(distdir) \
! 125: || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
! 126: && rm -fr $(distdir); }; }
! 127: DIST_ARCHIVES = $(distdir).tar.gz
! 128: GZIP_ENV = --best
! 129: distuninstallcheck_listfiles = find . -type f -print
! 130: distcleancheck_listfiles = find . -type f -print
! 131: ACLOCAL = @ACLOCAL@
1.18 ohara 132: AMTAR = @AMTAR@
1.22 ! ohara 133: AR = @AR@
! 134: AUTOCONF = @AUTOCONF@
! 135: AUTOHEADER = @AUTOHEADER@
! 136: AUTOMAKE = @AUTOMAKE@
1.18 ohara 137: AWK = @AWK@
138: CC = @CC@
1.22 ! ohara 139: CCDEPMODE = @CCDEPMODE@
! 140: CFLAGS = @CFLAGS@
! 141: CPP = @CPP@
! 142: CPPFLAGS = @CPPFLAGS@
! 143: CXX = @CXX@
! 144: CXXCPP = @CXXCPP@
! 145: CXXDEPMODE = @CXXDEPMODE@
! 146: CXXFLAGS = @CXXFLAGS@
! 147: CYGPATH_W = @CYGPATH_W@
! 148: DEFS = @DEFS@
1.18 ohara 149: DEPDIR = @DEPDIR@
1.22 ! ohara 150: ECHO = @ECHO@
! 151: ECHO_C = @ECHO_C@
! 152: ECHO_N = @ECHO_N@
! 153: ECHO_T = @ECHO_T@
! 154: EGREP = @EGREP@
1.18 ohara 155: EXEEXT = @EXEEXT@
1.22 ! ohara 156: F77 = @F77@
! 157: FFLAGS = @FFLAGS@
! 158: GREP = @GREP@
! 159: INSTALL = @INSTALL@
! 160: INSTALL_DATA = @INSTALL_DATA@
! 161: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 162: INSTALL_SCRIPT = @INSTALL_SCRIPT@
1.18 ohara 163: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
1.22 ! ohara 164: LDFLAGS = @LDFLAGS@
! 165: LIBOBJS = @LIBOBJS@
! 166: LIBS = @LIBS@
1.18 ohara 167: LIBTOOL = @LIBTOOL@
168: LN_S = @LN_S@
1.22 ! ohara 169: LTLIBOBJS = @LTLIBOBJS@
1.18 ohara 170: MAINT = @MAINT@
1.22 ! ohara 171: MAKEINFO = @MAKEINFO@
! 172: MKDIR_P = @MKDIR_P@
1.18 ohara 173: OBJEXT = @OBJEXT@
174: PACKAGE = @PACKAGE@
1.22 ! ohara 175: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
! 176: PACKAGE_NAME = @PACKAGE_NAME@
! 177: PACKAGE_STRING = @PACKAGE_STRING@
! 178: PACKAGE_TARNAME = @PACKAGE_TARNAME@
! 179: PACKAGE_VERSION = @PACKAGE_VERSION@
! 180: PATH_SEPARATOR = @PATH_SEPARATOR@
1.18 ohara 181: RANLIB = @RANLIB@
1.22 ! ohara 182: SET_MAKE = @SET_MAKE@
! 183: SHELL = @SHELL@
! 184: STRIP = @STRIP@
1.18 ohara 185: VERSION = @VERSION@
1.22 ! ohara 186: XMKMF = @XMKMF@
1.18 ohara 187: X_CFLAGS = @X_CFLAGS@
188: X_EXTRA_LIBS = @X_EXTRA_LIBS@
189: X_LIBS = @X_LIBS@
190: X_PRE_LIBS = @X_PRE_LIBS@
1.22 ! ohara 191: abs_builddir = @abs_builddir@
! 192: abs_srcdir = @abs_srcdir@
! 193: abs_top_builddir = @abs_top_builddir@
! 194: abs_top_srcdir = @abs_top_srcdir@
! 195: ac_ct_CC = @ac_ct_CC@
! 196: ac_ct_CXX = @ac_ct_CXX@
! 197: ac_ct_F77 = @ac_ct_F77@
1.18 ohara 198: am__include = @am__include@
1.22 ! ohara 199: am__leading_dot = @am__leading_dot@
1.18 ohara 200: am__quote = @am__quote@
1.22 ! ohara 201: am__tar = @am__tar@
! 202: am__untar = @am__untar@
! 203: bindir = @bindir@
! 204: build = @build@
! 205: build_alias = @build_alias@
! 206: build_cpu = @build_cpu@
! 207: build_os = @build_os@
! 208: build_vendor = @build_vendor@
! 209: builddir = @builddir@
! 210: datadir = @datadir@
! 211: datarootdir = @datarootdir@
! 212: docdir = ${prefix}/doc/ox_toolkit
! 213: dvidir = @dvidir@
! 214: exec_prefix = @exec_prefix@
! 215: host = @host@
! 216: host_alias = @host_alias@
! 217: host_cpu = @host_cpu@
! 218: host_os = @host_os@
! 219: host_vendor = @host_vendor@
! 220: htmldir = @htmldir@
! 221: includedir = @includedir@
! 222: infodir = @infodir@
1.18 ohara 223: install_sh = @install_sh@
1.22 ! ohara 224: libdir = @libdir@
! 225: libexecdir = @libexecdir@
! 226: localedir = @localedir@
! 227: localstatedir = @localstatedir@
! 228: mandir = @mandir@
! 229: mkdir_p = @mkdir_p@
! 230: oldincludedir = @oldincludedir@
! 231: pdfdir = @pdfdir@
! 232: prefix = @prefix@
! 233: program_transform_name = @program_transform_name@
! 234: psdir = @psdir@
! 235: sbindir = @sbindir@
! 236: sharedstatedir = @sharedstatedir@
! 237: srcdir = @srcdir@
! 238: sysconfdir = @sysconfdir@
! 239: target = @target@
! 240: target_alias = @target_alias@
! 241: target_cpu = @target_cpu@
! 242: target_os = @target_os@
! 243: target_vendor = @target_vendor@
! 244: top_builddir = @top_builddir@
! 245: top_srcdir = @top_srcdir@
1.18 ohara 246: AUTOMAKE_OPTIONS = foreign no-dependencies 1.5
247: OXWEAVE = ${prefix}/bin/oxweave
248: INCLUDES = @X_CFLAGS@ -I${prefix}/include
1.21 ohara 249: OXLIBS = -L${prefix}/lib ./libox.la -lgc -lgmp
1.18 ohara 250: XLIBS = ${X_LIBS} ${X_PRE_LIBS} -lX11 ${X_EXTRA_LIBS}
251: DOCUMENTS = readme-en.txt readme-ja.txt bnf-en.txt bnf-ja.txt
252: CLEANFILES = ${DOCUMENTS}
253: DISTCLEANFILES = .configure_done
254: doc_DATA = ${DOCUMENTS}
1.21 ohara 255: include_HEADERS = ox_toolkit.h
1.18 ohara 256: noinst_HEADERS = mysocket.h parse.h
1.21 ohara 257: bconv_SOURCES = bconv.c ox_toolkit.h
258: sample1_SOURCES = sample1.c ox_toolkit.h
259: sample2_SOURCES = sample2.c ox_toolkit.h
260: zclient_SOURCES = zclient.c ox_toolkit.h
261: testclient_SOURCES = testclient.c ox_toolkit.h
262: ox_Xsample_SOURCES = ox_Xsample.c glib.c ox_toolkit.h
1.18 ohara 263: bconv_LDADD = ${OXLIBS}
264: sample1_LDADD = ${OXLIBS}
265: sample2_LDADD = ${OXLIBS}
266: zclient_LDADD = ${OXLIBS}
267: testclient_LDADD = ${OXLIBS}
268: ox_Xsample_LDADD = ${OXLIBS} ${XLIBS}
269: lib_LTLIBRARIES = libox.la
270: libox_la_LDFLAGS = --version-info 0:0:0
271: libox_la_SOURCES = ox.c cmo.c parse.c mysocket.c mathcap.c dump.c \
272: cmolen.c print.c oxf.c oxf_old.c \
1.21 ohara 273: ox_toolkit.h mysocket.h parse.h
1.18 ohara 274:
275: all: all-am
276:
277: .SUFFIXES:
278: .SUFFIXES: .c .lo .o .obj
1.22 ! ohara 279: am--refresh:
! 280: @:
! 281: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
! 282: @for dep in $?; do \
! 283: case '$(am__configure_deps)' in \
! 284: *$$dep*) \
! 285: echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
! 286: cd $(srcdir) && $(AUTOMAKE) --foreign \
! 287: && exit 0; \
! 288: exit 1;; \
! 289: esac; \
! 290: done; \
! 291: echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
1.18 ohara 292: cd $(top_srcdir) && \
293: $(AUTOMAKE) --foreign Makefile
1.22 ! ohara 294: .PRECIOUS: Makefile
! 295: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! 296: @case '$?' in \
! 297: *config.status*) \
! 298: echo ' $(SHELL) ./config.status'; \
! 299: $(SHELL) ./config.status;; \
! 300: *) \
! 301: echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
! 302: cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
! 303: esac;
1.18 ohara 304:
1.22 ! ohara 305: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
1.18 ohara 306: $(SHELL) ./config.status --recheck
1.22 ! ohara 307:
! 308: $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
1.18 ohara 309: cd $(srcdir) && $(AUTOCONF)
1.22 ! ohara 310: $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
1.18 ohara 311: cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
312: install-libLTLIBRARIES: $(lib_LTLIBRARIES)
313: @$(NORMAL_INSTALL)
1.22 ! ohara 314: test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
1.18 ohara 315: @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
316: if test -f $$p; then \
1.22 ! ohara 317: f=$(am__strip_dir) \
! 318: echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
! 319: $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
1.18 ohara 320: else :; fi; \
321: done
322:
323: uninstall-libLTLIBRARIES:
324: @$(NORMAL_UNINSTALL)
325: @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
1.22 ! ohara 326: p=$(am__strip_dir) \
! 327: echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
! 328: $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
1.18 ohara 329: done
330:
331: clean-libLTLIBRARIES:
332: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
1.22 ! ohara 333: @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
! 334: dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
! 335: test "$$dir" != "$$p" || dir=.; \
! 336: echo "rm -f \"$${dir}/so_locations\""; \
! 337: rm -f "$${dir}/so_locations"; \
! 338: done
1.18 ohara 339: libox.la: $(libox_la_OBJECTS) $(libox_la_DEPENDENCIES)
1.22 ! ohara 340: $(libox_la_LINK) -rpath $(libdir) $(libox_la_OBJECTS) $(libox_la_LIBADD) $(LIBS)
1.18 ohara 341:
342: clean-noinstPROGRAMS:
1.22 ! ohara 343: @list='$(noinst_PROGRAMS)'; for p in $$list; do \
! 344: f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
! 345: echo " rm -f $$p $$f"; \
! 346: rm -f $$p $$f ; \
! 347: done
1.18 ohara 348: bconv$(EXEEXT): $(bconv_OBJECTS) $(bconv_DEPENDENCIES)
349: @rm -f bconv$(EXEEXT)
1.22 ! ohara 350: $(LINK) $(bconv_OBJECTS) $(bconv_LDADD) $(LIBS)
1.18 ohara 351: ox_Xsample$(EXEEXT): $(ox_Xsample_OBJECTS) $(ox_Xsample_DEPENDENCIES)
352: @rm -f ox_Xsample$(EXEEXT)
1.22 ! ohara 353: $(LINK) $(ox_Xsample_OBJECTS) $(ox_Xsample_LDADD) $(LIBS)
1.18 ohara 354: sample1$(EXEEXT): $(sample1_OBJECTS) $(sample1_DEPENDENCIES)
355: @rm -f sample1$(EXEEXT)
1.22 ! ohara 356: $(LINK) $(sample1_OBJECTS) $(sample1_LDADD) $(LIBS)
1.18 ohara 357: sample2$(EXEEXT): $(sample2_OBJECTS) $(sample2_DEPENDENCIES)
358: @rm -f sample2$(EXEEXT)
1.22 ! ohara 359: $(LINK) $(sample2_OBJECTS) $(sample2_LDADD) $(LIBS)
1.18 ohara 360: testclient$(EXEEXT): $(testclient_OBJECTS) $(testclient_DEPENDENCIES)
361: @rm -f testclient$(EXEEXT)
1.22 ! ohara 362: $(LINK) $(testclient_OBJECTS) $(testclient_LDADD) $(LIBS)
1.18 ohara 363: zclient$(EXEEXT): $(zclient_OBJECTS) $(zclient_DEPENDENCIES)
364: @rm -f zclient$(EXEEXT)
1.22 ! ohara 365: $(LINK) $(zclient_OBJECTS) $(zclient_LDADD) $(LIBS)
1.18 ohara 366:
367: mostlyclean-compile:
1.22 ! ohara 368: -rm -f *.$(OBJEXT)
1.1 ohara 369:
1.18 ohara 370: distclean-compile:
371: -rm -f *.tab.c
1.17 ohara 372:
1.18 ohara 373: .c.o:
1.22 ! ohara 374: $(COMPILE) -c $<
1.17 ohara 375:
1.18 ohara 376: .c.obj:
1.22 ! ohara 377: $(COMPILE) -c `$(CYGPATH_W) '$<'`
1.1 ohara 378:
1.18 ohara 379: .c.lo:
1.22 ! ohara 380: $(LTCOMPILE) -c -o $@ $<
! 381:
! 382: mostlyclean-libtool:
! 383: -rm -f *.lo
! 384:
! 385: clean-libtool:
! 386: -rm -rf .libs _libs
! 387:
! 388: distclean-libtool:
! 389: -rm -f libtool
1.18 ohara 390: install-docDATA: $(doc_DATA)
391: @$(NORMAL_INSTALL)
1.22 ! ohara 392: test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
1.18 ohara 393: @list='$(doc_DATA)'; for p in $$list; do \
394: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
1.22 ! ohara 395: f=$(am__strip_dir) \
! 396: echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
! 397: $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
1.18 ohara 398: done
399:
400: uninstall-docDATA:
401: @$(NORMAL_UNINSTALL)
402: @list='$(doc_DATA)'; for p in $$list; do \
1.22 ! ohara 403: f=$(am__strip_dir) \
! 404: echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
! 405: rm -f "$(DESTDIR)$(docdir)/$$f"; \
1.18 ohara 406: done
407: install-includeHEADERS: $(include_HEADERS)
408: @$(NORMAL_INSTALL)
1.22 ! ohara 409: test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
1.18 ohara 410: @list='$(include_HEADERS)'; for p in $$list; do \
411: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
1.22 ! ohara 412: f=$(am__strip_dir) \
! 413: echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
! 414: $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
1.18 ohara 415: done
416:
417: uninstall-includeHEADERS:
418: @$(NORMAL_UNINSTALL)
419: @list='$(include_HEADERS)'; for p in $$list; do \
1.22 ! ohara 420: f=$(am__strip_dir) \
! 421: echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
! 422: rm -f "$(DESTDIR)$(includedir)/$$f"; \
1.18 ohara 423: done
424:
425: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
1.22 ! ohara 426: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
1.18 ohara 427: unique=`for i in $$list; do \
428: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
429: done | \
430: $(AWK) ' { files[$$0] = 1; } \
431: END { for (i in files) print i; }'`; \
1.22 ! ohara 432: mkid -fID $$unique
! 433: tags: TAGS
1.18 ohara 434:
435: TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
436: $(TAGS_FILES) $(LISP)
437: tags=; \
438: here=`pwd`; \
1.22 ! ohara 439: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
1.18 ohara 440: unique=`for i in $$list; do \
441: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
442: done | \
443: $(AWK) ' { files[$$0] = 1; } \
444: END { for (i in files) print i; }'`; \
1.22 ! ohara 445: if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
! 446: test -n "$$unique" || unique=$$empty_fix; \
! 447: $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
! 448: $$tags $$unique; \
! 449: fi
! 450: ctags: CTAGS
! 451: CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
! 452: $(TAGS_FILES) $(LISP)
! 453: tags=; \
! 454: here=`pwd`; \
! 455: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
! 456: unique=`for i in $$list; do \
! 457: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! 458: done | \
! 459: $(AWK) ' { files[$$0] = 1; } \
! 460: END { for (i in files) print i; }'`; \
! 461: test -z "$(CTAGS_ARGS)$$tags$$unique" \
! 462: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
! 463: $$tags $$unique
1.18 ohara 464:
465: GTAGS:
1.22 ! ohara 466: here=`$(am__cd) $(top_builddir) && pwd` \
1.18 ohara 467: && cd $(top_srcdir) \
468: && gtags -i $(GTAGS_ARGS) $$here
469:
470: distclean-tags:
1.22 ! ohara 471: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
1.18 ohara 472:
473: distdir: $(DISTFILES)
1.22 ! ohara 474: $(am__remove_distdir)
! 475: test -d $(distdir) || mkdir $(distdir)
! 476: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 477: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
! 478: list='$(DISTFILES)'; \
! 479: dist_files=`for file in $$list; do echo $$file; done | \
! 480: sed -e "s|^$$srcdirstrip/||;t" \
! 481: -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
! 482: case $$dist_files in \
! 483: */*) $(MKDIR_P) `echo "$$dist_files" | \
! 484: sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
! 485: sort -u` ;; \
! 486: esac; \
! 487: for file in $$dist_files; do \
! 488: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
1.18 ohara 489: if test -d $$d/$$file; then \
1.22 ! ohara 490: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
! 491: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 492: cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
! 493: fi; \
! 494: cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
1.18 ohara 495: else \
496: test -f $(distdir)/$$file \
497: || cp -p $$d/$$file $(distdir)/$$file \
498: || exit 1; \
499: fi; \
500: done
501: -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
502: ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
503: ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
1.22 ! ohara 504: ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
1.18 ohara 505: || chmod -R a+r $(distdir)
1.22 ! ohara 506: dist-gzip: distdir
! 507: tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
! 508: $(am__remove_distdir)
! 509:
! 510: dist-bzip2: distdir
! 511: tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
! 512: $(am__remove_distdir)
! 513:
! 514: dist-tarZ: distdir
! 515: tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
! 516: $(am__remove_distdir)
! 517:
! 518: dist-shar: distdir
! 519: shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
! 520: $(am__remove_distdir)
! 521:
! 522: dist-zip: distdir
! 523: -rm -f $(distdir).zip
! 524: zip -rq $(distdir).zip $(distdir)
! 525: $(am__remove_distdir)
! 526:
! 527: dist dist-all: distdir
! 528: tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
! 529: $(am__remove_distdir)
1.18 ohara 530:
531: # This target untars the dist file and tries a VPATH configuration. Then
532: # it guarantees that the distribution is self-contained by making another
533: # tarfile.
534: distcheck: dist
1.22 ! ohara 535: case '$(DIST_ARCHIVES)' in \
! 536: *.tar.gz*) \
! 537: GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
! 538: *.tar.bz2*) \
! 539: bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
! 540: *.tar.Z*) \
! 541: uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
! 542: *.shar.gz*) \
! 543: GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
! 544: *.zip*) \
! 545: unzip $(distdir).zip ;;\
! 546: esac
1.18 ohara 547: chmod -R a-w $(distdir); chmod a+w $(distdir)
1.22 ! ohara 548: mkdir $(distdir)/_build
! 549: mkdir $(distdir)/_inst
1.18 ohara 550: chmod a-w $(distdir)
1.22 ! ohara 551: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
! 552: && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
! 553: && cd $(distdir)/_build \
! 554: && ../configure --srcdir=.. --prefix="$$dc_install_base" \
! 555: $(DISTCHECK_CONFIGURE_FLAGS) \
1.18 ohara 556: && $(MAKE) $(AM_MAKEFLAGS) \
557: && $(MAKE) $(AM_MAKEFLAGS) dvi \
558: && $(MAKE) $(AM_MAKEFLAGS) check \
559: && $(MAKE) $(AM_MAKEFLAGS) install \
560: && $(MAKE) $(AM_MAKEFLAGS) installcheck \
561: && $(MAKE) $(AM_MAKEFLAGS) uninstall \
1.22 ! ohara 562: && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
! 563: distuninstallcheck \
! 564: && chmod -R a-w "$$dc_install_base" \
! 565: && ({ \
! 566: (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
! 567: && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
! 568: && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
! 569: && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
! 570: distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
! 571: } || { rm -rf "$$dc_destdir"; exit 1; }) \
! 572: && rm -rf "$$dc_destdir" \
1.18 ohara 573: && $(MAKE) $(AM_MAKEFLAGS) dist \
1.22 ! ohara 574: && rm -rf $(DIST_ARCHIVES) \
! 575: && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
! 576: $(am__remove_distdir)
! 577: @(echo "$(distdir) archives ready for distribution: "; \
! 578: list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
! 579: sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
! 580: distuninstallcheck:
! 581: @cd $(distuninstallcheck_dir) \
! 582: && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
! 583: || { echo "ERROR: files left after uninstall:" ; \
! 584: if test -n "$(DESTDIR)"; then \
! 585: echo " (check DESTDIR support)"; \
! 586: fi ; \
! 587: $(distuninstallcheck_listfiles) ; \
! 588: exit 1; } >&2
! 589: distcleancheck: distclean
! 590: @if test '$(srcdir)' = . ; then \
! 591: echo "ERROR: distcleancheck can only run from a VPATH build" ; \
! 592: exit 1 ; \
! 593: fi
! 594: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
! 595: || { echo "ERROR: files left in build directory after distclean:" ; \
! 596: $(distcleancheck_listfiles) ; \
! 597: exit 1; } >&2
1.18 ohara 598: check-am: all-am
599: check: check-am
600: all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(DATA) $(HEADERS)
601: installdirs:
1.22 ! ohara 602: for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(includedir)"; do \
! 603: test -z "$$dir" || $(MKDIR_P) "$$dir"; \
! 604: done
1.18 ohara 605: install: install-am
606: install-exec: install-exec-am
607: install-data: install-data-am
608: uninstall: uninstall-am
609:
610: install-am: all-am
611: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
612:
613: installcheck: installcheck-am
614: install-strip:
615: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1.22 ! ohara 616: install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1.18 ohara 617: `test -z '$(STRIP)' || \
618: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
619: mostlyclean-generic:
620:
621: clean-generic:
622: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
623:
624: distclean-generic:
1.22 ! ohara 625: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1.18 ohara 626: -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
627:
628: maintainer-clean-generic:
629: @echo "This command is intended for maintainers to use"
630: @echo "it deletes files that may require special tools to rebuild."
631: clean: clean-am
632:
633: clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
634: clean-noinstPROGRAMS mostlyclean-am
635:
636: distclean: distclean-am
1.22 ! ohara 637: -rm -f $(am__CONFIG_DISTCLEAN_FILES)
! 638: -rm -f Makefile
1.18 ohara 639: distclean-am: clean-am distclean-compile distclean-generic \
640: distclean-libtool distclean-tags
641:
642: dvi: dvi-am
643:
644: dvi-am:
645:
1.22 ! ohara 646: html: html-am
! 647:
1.18 ohara 648: info: info-am
649:
650: info-am:
651:
652: install-data-am: install-docDATA install-includeHEADERS
653:
1.22 ! ohara 654: install-dvi: install-dvi-am
! 655:
1.18 ohara 656: install-exec-am: install-libLTLIBRARIES
657:
1.22 ! ohara 658: install-html: install-html-am
! 659:
1.18 ohara 660: install-info: install-info-am
661:
662: install-man:
663:
1.22 ! ohara 664: install-pdf: install-pdf-am
! 665:
! 666: install-ps: install-ps-am
! 667:
1.18 ohara 668: installcheck-am:
669:
670: maintainer-clean: maintainer-clean-am
1.22 ! ohara 671: -rm -f $(am__CONFIG_DISTCLEAN_FILES)
! 672: -rm -rf $(top_srcdir)/autom4te.cache
! 673: -rm -f Makefile
1.18 ohara 674: maintainer-clean-am: distclean-am maintainer-clean-generic
675:
676: mostlyclean: mostlyclean-am
677:
678: mostlyclean-am: mostlyclean-compile mostlyclean-generic \
679: mostlyclean-libtool
680:
1.22 ! ohara 681: pdf: pdf-am
! 682:
! 683: pdf-am:
! 684:
! 685: ps: ps-am
! 686:
! 687: ps-am:
! 688:
1.18 ohara 689: uninstall-am: uninstall-docDATA uninstall-includeHEADERS \
1.22 ! ohara 690: uninstall-libLTLIBRARIES
! 691:
! 692: .MAKE: install-am install-strip
1.18 ohara 693:
1.22 ! ohara 694: .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
! 695: clean-generic clean-libLTLIBRARIES clean-libtool \
! 696: clean-noinstPROGRAMS ctags dist dist-all dist-bzip2 dist-gzip \
! 697: dist-shar dist-tarZ dist-zip distcheck distclean \
! 698: distclean-compile distclean-generic distclean-libtool \
! 699: distclean-tags distcleancheck distdir distuninstallcheck dvi \
! 700: dvi-am html html-am info info-am install install-am \
! 701: install-data install-data-am install-docDATA install-dvi \
! 702: install-dvi-am install-exec install-exec-am install-html \
! 703: install-html-am install-includeHEADERS install-info \
! 704: install-info-am install-libLTLIBRARIES install-man install-pdf \
! 705: install-pdf-am install-ps install-ps-am install-strip \
! 706: installcheck installcheck-am installdirs maintainer-clean \
1.18 ohara 707: maintainer-clean-generic mostlyclean mostlyclean-compile \
1.22 ! ohara 708: mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
! 709: tags uninstall uninstall-am uninstall-docDATA \
! 710: uninstall-includeHEADERS uninstall-libLTLIBRARIES
1.1 ohara 711:
1.10 ohara 712:
1.11 ohara 713: readme-ja.txt: README
714: ${OXWEAVE} ja common < README > readme-ja.txt
1.1 ohara 715:
1.11 ohara 716: readme-en.txt: README
717: ${OXWEAVE} en common < README > readme-en.txt
1.1 ohara 718:
1.11 ohara 719: bnf-ja.txt: bnf.oxweave
720: ${OXWEAVE} ja common < bnf.oxweave > bnf-ja.txt
1.1 ohara 721:
1.11 ohara 722: bnf-en.txt: bnf.oxweave
723: ${OXWEAVE} en common < bnf.oxweave > bnf-en.txt
1.18 ohara 724: # Tell versions [3.59,3.63) of GNU make to not export all variables.
725: # Otherwise a system limit (for SysV at least) may be exceeded.
726: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM / src / ox_toolkit