Annotation of OpenXM/src/ox_toolkit/aclocal.m4, Revision 1.2
1.2 ! ohara 1: # generated automatically by aclocal 1.10 -*- Autoconf -*-
1.1 ohara 2:
1.2 ! ohara 3: # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
! 4: # 2005, 2006 Free Software Foundation, Inc.
1.1 ohara 5: # This file is free software; the Free Software Foundation
6: # gives unlimited permission to copy and/or distribute it,
7: # with or without modifications, as long as this notice is preserved.
8:
9: # This program is distributed in the hope that it will be useful,
10: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
11: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
12: # PARTICULAR PURPOSE.
13:
1.2 ! ohara 14: m4_if(m4_PACKAGE_VERSION, [2.61],,
! 15: [m4_fatal([this file was generated for autoconf 2.61.
! 16: You have another version of autoconf. If you want to use that,
! 17: you should regenerate the build system entirely.], [63])])
1.1 ohara 18:
1.2 ! ohara 19: # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
1.1 ohara 20:
1.2 ! ohara 21: # serial 48 AC_PROG_LIBTOOL
1.1 ohara 22:
23:
24: # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
25: # -----------------------------------------------------------
26: # If this macro is not defined by Autoconf, define it here.
1.2 ! ohara 27: m4_ifdef([AC_PROVIDE_IFELSE],
! 28: [],
! 29: [m4_define([AC_PROVIDE_IFELSE],
! 30: [m4_ifdef([AC_PROVIDE_$1],
! 31: [$2], [$3])])])
1.1 ohara 32:
33:
1.2 ! ohara 34: # AC_PROG_LIBTOOL
! 35: # ---------------
! 36: AC_DEFUN([AC_PROG_LIBTOOL],
! 37: [AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
! 38: dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
! 39: dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
! 40: AC_PROVIDE_IFELSE([AC_PROG_CXX],
! 41: [AC_LIBTOOL_CXX],
! 42: [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
! 43: ])])
! 44: dnl And a similar setup for Fortran 77 support
! 45: AC_PROVIDE_IFELSE([AC_PROG_F77],
! 46: [AC_LIBTOOL_F77],
! 47: [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
! 48: ])])
! 49:
! 50: dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
! 51: dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
! 52: dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
! 53: AC_PROVIDE_IFELSE([AC_PROG_GCJ],
! 54: [AC_LIBTOOL_GCJ],
! 55: [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
! 56: [AC_LIBTOOL_GCJ],
! 57: [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
! 58: [AC_LIBTOOL_GCJ],
! 59: [ifdef([AC_PROG_GCJ],
! 60: [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
! 61: ifdef([A][M_PROG_GCJ],
! 62: [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
! 63: ifdef([LT_AC_PROG_GCJ],
! 64: [define([LT_AC_PROG_GCJ],
! 65: defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
! 66: ])])# AC_PROG_LIBTOOL
! 67:
! 68:
! 69: # _AC_PROG_LIBTOOL
! 70: # ----------------
! 71: AC_DEFUN([_AC_PROG_LIBTOOL],
! 72: [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
! 73: AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
! 74: AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
! 75: AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
1.1 ohara 76:
1.2 ! ohara 77: # This can be used to rebuild libtool when needed
! 78: LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
1.1 ohara 79:
1.2 ! ohara 80: # Always use our own libtool.
! 81: LIBTOOL='$(SHELL) $(top_builddir)/libtool'
! 82: AC_SUBST(LIBTOOL)dnl
1.1 ohara 83:
1.2 ! ohara 84: # Prevent multiple expansion
! 85: define([AC_PROG_LIBTOOL], [])
! 86: ])# _AC_PROG_LIBTOOL
1.1 ohara 87:
88:
1.2 ! ohara 89: # AC_LIBTOOL_SETUP
! 90: # ----------------
! 91: AC_DEFUN([AC_LIBTOOL_SETUP],
! 92: [AC_PREREQ(2.50)dnl
! 93: AC_REQUIRE([AC_ENABLE_SHARED])dnl
! 94: AC_REQUIRE([AC_ENABLE_STATIC])dnl
! 95: AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
! 96: AC_REQUIRE([AC_CANONICAL_HOST])dnl
! 97: AC_REQUIRE([AC_CANONICAL_BUILD])dnl
! 98: AC_REQUIRE([AC_PROG_CC])dnl
! 99: AC_REQUIRE([AC_PROG_LD])dnl
! 100: AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
! 101: AC_REQUIRE([AC_PROG_NM])dnl
1.1 ohara 102:
1.2 ! ohara 103: AC_REQUIRE([AC_PROG_LN_S])dnl
! 104: AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
! 105: # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
! 106: AC_REQUIRE([AC_OBJEXT])dnl
! 107: AC_REQUIRE([AC_EXEEXT])dnl
! 108: dnl
1.1 ohara 109:
1.2 ! ohara 110: AC_LIBTOOL_SYS_MAX_CMD_LEN
! 111: AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
! 112: AC_LIBTOOL_OBJDIR
! 113:
! 114: AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
! 115: _LT_AC_PROG_ECHO_BACKSLASH
! 116:
! 117: case $host_os in
! 118: aix3*)
! 119: # AIX sometimes has problems with the GCC collect2 program. For some
! 120: # reason, if we set the COLLECT_NAMES environment variable, the problems
! 121: # vanish in a puff of smoke.
! 122: if test "X${COLLECT_NAMES+set}" != Xset; then
! 123: COLLECT_NAMES=
! 124: export COLLECT_NAMES
! 125: fi
! 126: ;;
! 127: esac
1.1 ohara 128:
1.2 ! ohara 129: # Sed substitution that helps us do robust quoting. It backslashifies
! 130: # metacharacters that are still active within double-quoted strings.
! 131: Xsed='sed -e 1s/^X//'
! 132: [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
! 133:
! 134: # Same as above, but do not quote variable references.
! 135: [double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
! 136:
! 137: # Sed substitution to delay expansion of an escaped shell variable in a
! 138: # double_quote_subst'ed string.
! 139: delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
! 140:
! 141: # Sed substitution to avoid accidental globbing in evaled expressions
! 142: no_glob_subst='s/\*/\\\*/g'
! 143:
! 144: # Constants:
! 145: rm="rm -f"
! 146:
! 147: # Global variables:
! 148: default_ofile=libtool
! 149: can_build_shared=yes
! 150:
! 151: # All known linkers require a `.a' archive for static linking (except MSVC,
! 152: # which needs '.lib').
! 153: libext=a
! 154: ltmain="$ac_aux_dir/ltmain.sh"
! 155: ofile="$default_ofile"
! 156: with_gnu_ld="$lt_cv_prog_gnu_ld"
! 157:
! 158: AC_CHECK_TOOL(AR, ar, false)
! 159: AC_CHECK_TOOL(RANLIB, ranlib, :)
! 160: AC_CHECK_TOOL(STRIP, strip, :)
! 161:
! 162: old_CC="$CC"
! 163: old_CFLAGS="$CFLAGS"
! 164:
! 165: # Set sane defaults for various variables
! 166: test -z "$AR" && AR=ar
! 167: test -z "$AR_FLAGS" && AR_FLAGS=cru
! 168: test -z "$AS" && AS=as
! 169: test -z "$CC" && CC=cc
! 170: test -z "$LTCC" && LTCC=$CC
! 171: test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
! 172: test -z "$DLLTOOL" && DLLTOOL=dlltool
! 173: test -z "$LD" && LD=ld
! 174: test -z "$LN_S" && LN_S="ln -s"
! 175: test -z "$MAGIC_CMD" && MAGIC_CMD=file
! 176: test -z "$NM" && NM=nm
! 177: test -z "$SED" && SED=sed
! 178: test -z "$OBJDUMP" && OBJDUMP=objdump
! 179: test -z "$RANLIB" && RANLIB=:
! 180: test -z "$STRIP" && STRIP=:
! 181: test -z "$ac_objext" && ac_objext=o
! 182:
! 183: # Determine commands to create old-style static archives.
! 184: old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
! 185: old_postinstall_cmds='chmod 644 $oldlib'
! 186: old_postuninstall_cmds=
! 187:
! 188: if test -n "$RANLIB"; then
! 189: case $host_os in
! 190: openbsd*)
! 191: old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
! 192: ;;
! 193: *)
! 194: old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
! 195: ;;
! 196: esac
! 197: old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
1.1 ohara 198: fi
199:
1.2 ! ohara 200: _LT_CC_BASENAME([$compiler])
! 201:
! 202: # Only perform the check for file, if the check method requires it
! 203: case $deplibs_check_method in
! 204: file_magic*)
! 205: if test "$file_magic_cmd" = '$MAGIC_CMD'; then
! 206: AC_PATH_MAGIC
! 207: fi
! 208: ;;
! 209: esac
1.1 ohara 210:
1.2 ! ohara 211: AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
! 212: AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
! 213: enable_win32_dll=yes, enable_win32_dll=no)
! 214:
! 215: AC_ARG_ENABLE([libtool-lock],
! 216: [AC_HELP_STRING([--disable-libtool-lock],
! 217: [avoid locking (might break parallel builds)])])
! 218: test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
! 219:
! 220: AC_ARG_WITH([pic],
! 221: [AC_HELP_STRING([--with-pic],
! 222: [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
! 223: [pic_mode="$withval"],
! 224: [pic_mode=default])
! 225: test -z "$pic_mode" && pic_mode=default
! 226:
! 227: # Use C for the default configuration in the libtool script
! 228: tagname=
! 229: AC_LIBTOOL_LANG_C_CONFIG
! 230: _LT_AC_TAGCONFIG
! 231: ])# AC_LIBTOOL_SETUP
! 232:
! 233:
! 234: # _LT_AC_SYS_COMPILER
! 235: # -------------------
! 236: AC_DEFUN([_LT_AC_SYS_COMPILER],
! 237: [AC_REQUIRE([AC_PROG_CC])dnl
! 238:
! 239: # If no C compiler was specified, use CC.
! 240: LTCC=${LTCC-"$CC"}
! 241:
! 242: # If no C compiler flags were specified, use CFLAGS.
! 243: LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
! 244:
! 245: # Allow CC to be a program name with arguments.
! 246: compiler=$CC
! 247: ])# _LT_AC_SYS_COMPILER
! 248:
! 249:
! 250: # _LT_CC_BASENAME(CC)
! 251: # -------------------
! 252: # Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
! 253: AC_DEFUN([_LT_CC_BASENAME],
! 254: [for cc_temp in $1""; do
! 255: case $cc_temp in
! 256: compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
! 257: distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
! 258: \-*) ;;
! 259: *) break;;
! 260: esac
! 261: done
! 262: cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
! 263: ])
1.1 ohara 264:
265:
1.2 ! ohara 266: # _LT_COMPILER_BOILERPLATE
! 267: # ------------------------
! 268: # Check for compiler boilerplate output or warnings with
! 269: # the simple compiler test code.
! 270: AC_DEFUN([_LT_COMPILER_BOILERPLATE],
! 271: [ac_outfile=conftest.$ac_objext
! 272: printf "$lt_simple_compile_test_code" >conftest.$ac_ext
! 273: eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
! 274: _lt_compiler_boilerplate=`cat conftest.err`
! 275: $rm conftest*
! 276: ])# _LT_COMPILER_BOILERPLATE
! 277:
! 278:
! 279: # _LT_LINKER_BOILERPLATE
! 280: # ----------------------
! 281: # Check for linker boilerplate output or warnings with
! 282: # the simple link test code.
! 283: AC_DEFUN([_LT_LINKER_BOILERPLATE],
! 284: [ac_outfile=conftest.$ac_objext
! 285: printf "$lt_simple_link_test_code" >conftest.$ac_ext
! 286: eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
! 287: _lt_linker_boilerplate=`cat conftest.err`
! 288: $rm conftest*
! 289: ])# _LT_LINKER_BOILERPLATE
! 290:
! 291:
! 292: # _LT_AC_SYS_LIBPATH_AIX
! 293: # ----------------------
! 294: # Links a minimal program and checks the executable
! 295: # for the system default hardcoded library path. In most cases,
! 296: # this is /usr/lib:/lib, but when the MPI compilers are used
! 297: # the location of the communication and MPI libs are included too.
! 298: # If we don't find anything, use the default library path according
! 299: # to the aix ld manual.
! 300: AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
! 301: [AC_LINK_IFELSE(AC_LANG_PROGRAM,[
! 302: aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
! 303: }'`
! 304: # Check for a 64-bit object if we didn't find anything.
! 305: if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
! 306: }'`; fi],[])
! 307: if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
! 308: ])# _LT_AC_SYS_LIBPATH_AIX
! 309:
! 310:
! 311: # _LT_AC_SHELL_INIT(ARG)
! 312: # ----------------------
! 313: AC_DEFUN([_LT_AC_SHELL_INIT],
! 314: [ifdef([AC_DIVERSION_NOTICE],
! 315: [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
! 316: [AC_DIVERT_PUSH(NOTICE)])
! 317: $1
! 318: AC_DIVERT_POP
! 319: ])# _LT_AC_SHELL_INIT
! 320:
! 321:
! 322: # _LT_AC_PROG_ECHO_BACKSLASH
! 323: # --------------------------
! 324: # Add some code to the start of the generated configure script which
! 325: # will find an echo command which doesn't interpret backslashes.
! 326: AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
! 327: [_LT_AC_SHELL_INIT([
! 328: # Check that we are running under the correct shell.
! 329: SHELL=${CONFIG_SHELL-/bin/sh}
! 330:
! 331: case X$ECHO in
! 332: X*--fallback-echo)
! 333: # Remove one level of quotation (which was required for Make).
! 334: ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
! 335: ;;
! 336: esac
1.1 ohara 337:
1.2 ! ohara 338: echo=${ECHO-echo}
! 339: if test "X[$]1" = X--no-reexec; then
! 340: # Discard the --no-reexec flag, and continue.
! 341: shift
! 342: elif test "X[$]1" = X--fallback-echo; then
! 343: # Avoid inline document here, it may be left over
! 344: :
! 345: elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
! 346: # Yippee, $echo works!
! 347: :
1.1 ohara 348: else
1.2 ! ohara 349: # Restart under the correct shell.
! 350: exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
1.1 ohara 351: fi
352:
1.2 ! ohara 353: if test "X[$]1" = X--fallback-echo; then
! 354: # used as fallback echo
! 355: shift
! 356: cat <<EOF
! 357: [$]*
! 358: EOF
! 359: exit 0
! 360: fi
1.1 ohara 361:
1.2 ! ohara 362: # The HP-UX ksh and POSIX shell print the target directory to stdout
! 363: # if CDPATH is set.
! 364: (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
! 365:
! 366: if test -z "$ECHO"; then
! 367: if test "X${echo_test_string+set}" != Xset; then
! 368: # find a string as large as possible, as long as the shell can cope with it
! 369: for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
! 370: # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
! 371: if (echo_test_string=`eval $cmd`) 2>/dev/null &&
! 372: echo_test_string=`eval $cmd` &&
! 373: (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
! 374: then
! 375: break
! 376: fi
! 377: done
! 378: fi
1.1 ohara 379:
1.2 ! ohara 380: if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
! 381: echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
! 382: test "X$echo_testing_string" = "X$echo_test_string"; then
! 383: :
! 384: else
! 385: # The Solaris, AIX, and Digital Unix default echo programs unquote
! 386: # backslashes. This makes it impossible to quote backslashes using
! 387: # echo "$something" | sed 's/\\/\\\\/g'
! 388: #
! 389: # So, first we look for a working echo in the user's PATH.
! 390:
! 391: lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
! 392: for dir in $PATH /usr/ucb; do
! 393: IFS="$lt_save_ifs"
! 394: if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
! 395: test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
! 396: echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
! 397: test "X$echo_testing_string" = "X$echo_test_string"; then
! 398: echo="$dir/echo"
! 399: break
! 400: fi
! 401: done
! 402: IFS="$lt_save_ifs"
1.1 ohara 403:
1.2 ! ohara 404: if test "X$echo" = Xecho; then
! 405: # We didn't find a better echo, so look for alternatives.
! 406: if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
! 407: echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
! 408: test "X$echo_testing_string" = "X$echo_test_string"; then
! 409: # This shell has a builtin print -r that does the trick.
! 410: echo='print -r'
! 411: elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
! 412: test "X$CONFIG_SHELL" != X/bin/ksh; then
! 413: # If we have ksh, try running configure again with it.
! 414: ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
! 415: export ORIGINAL_CONFIG_SHELL
! 416: CONFIG_SHELL=/bin/ksh
! 417: export CONFIG_SHELL
! 418: exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
! 419: else
! 420: # Try using printf.
! 421: echo='printf %s\n'
! 422: if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
! 423: echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
! 424: test "X$echo_testing_string" = "X$echo_test_string"; then
! 425: # Cool, printf works
! 426: :
! 427: elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
! 428: test "X$echo_testing_string" = 'X\t' &&
! 429: echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
! 430: test "X$echo_testing_string" = "X$echo_test_string"; then
! 431: CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
! 432: export CONFIG_SHELL
! 433: SHELL="$CONFIG_SHELL"
! 434: export SHELL
! 435: echo="$CONFIG_SHELL [$]0 --fallback-echo"
! 436: elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
! 437: test "X$echo_testing_string" = 'X\t' &&
! 438: echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
! 439: test "X$echo_testing_string" = "X$echo_test_string"; then
! 440: echo="$CONFIG_SHELL [$]0 --fallback-echo"
! 441: else
! 442: # maybe with a smaller string...
! 443: prev=:
1.1 ohara 444:
1.2 ! ohara 445: for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
! 446: if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
! 447: then
! 448: break
! 449: fi
! 450: prev="$cmd"
! 451: done
! 452:
! 453: if test "$prev" != 'sed 50q "[$]0"'; then
! 454: echo_test_string=`eval $prev`
! 455: export echo_test_string
! 456: exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
! 457: else
! 458: # Oops. We lost completely, so just stick with echo.
! 459: echo=echo
! 460: fi
! 461: fi
! 462: fi
! 463: fi
! 464: fi
! 465: fi
1.1 ohara 466:
1.2 ! ohara 467: # Copy echo and quote the copy suitably for passing to libtool from
! 468: # the Makefile, instead of quoting the original, which is used later.
! 469: ECHO=$echo
! 470: if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
! 471: ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
! 472: fi
1.1 ohara 473:
1.2 ! ohara 474: AC_SUBST(ECHO)
! 475: ])])# _LT_AC_PROG_ECHO_BACKSLASH
1.1 ohara 476:
477:
1.2 ! ohara 478: # _LT_AC_LOCK
! 479: # -----------
! 480: AC_DEFUN([_LT_AC_LOCK],
! 481: [AC_ARG_ENABLE([libtool-lock],
! 482: [AC_HELP_STRING([--disable-libtool-lock],
! 483: [avoid locking (might break parallel builds)])])
! 484: test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
1.1 ohara 485:
1.2 ! ohara 486: # Some flags need to be propagated to the compiler or linker for good
! 487: # libtool support.
! 488: case $host in
! 489: ia64-*-hpux*)
! 490: # Find out which ABI we are using.
! 491: echo 'int i;' > conftest.$ac_ext
! 492: if AC_TRY_EVAL(ac_compile); then
! 493: case `/usr/bin/file conftest.$ac_objext` in
! 494: *ELF-32*)
! 495: HPUX_IA64_MODE="32"
! 496: ;;
! 497: *ELF-64*)
! 498: HPUX_IA64_MODE="64"
! 499: ;;
! 500: esac
! 501: fi
! 502: rm -rf conftest*
! 503: ;;
! 504: *-*-irix6*)
! 505: # Find out which ABI we are using.
! 506: echo '[#]line __oline__ "configure"' > conftest.$ac_ext
! 507: if AC_TRY_EVAL(ac_compile); then
! 508: if test "$lt_cv_prog_gnu_ld" = yes; then
! 509: case `/usr/bin/file conftest.$ac_objext` in
! 510: *32-bit*)
! 511: LD="${LD-ld} -melf32bsmip"
! 512: ;;
! 513: *N32*)
! 514: LD="${LD-ld} -melf32bmipn32"
! 515: ;;
! 516: *64-bit*)
! 517: LD="${LD-ld} -melf64bmip"
! 518: ;;
! 519: esac
! 520: else
! 521: case `/usr/bin/file conftest.$ac_objext` in
! 522: *32-bit*)
! 523: LD="${LD-ld} -32"
! 524: ;;
! 525: *N32*)
! 526: LD="${LD-ld} -n32"
! 527: ;;
! 528: *64-bit*)
! 529: LD="${LD-ld} -64"
! 530: ;;
! 531: esac
! 532: fi
! 533: fi
! 534: rm -rf conftest*
! 535: ;;
1.1 ohara 536:
1.2 ! ohara 537: x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
! 538: # Find out which ABI we are using.
! 539: echo 'int i;' > conftest.$ac_ext
! 540: if AC_TRY_EVAL(ac_compile); then
! 541: case `/usr/bin/file conftest.o` in
! 542: *32-bit*)
! 543: case $host in
! 544: x86_64-*linux*)
! 545: LD="${LD-ld} -m elf_i386"
! 546: ;;
! 547: ppc64-*linux*|powerpc64-*linux*)
! 548: LD="${LD-ld} -m elf32ppclinux"
! 549: ;;
! 550: s390x-*linux*)
! 551: LD="${LD-ld} -m elf_s390"
! 552: ;;
! 553: sparc64-*linux*)
! 554: LD="${LD-ld} -m elf32_sparc"
! 555: ;;
! 556: esac
! 557: ;;
! 558: *64-bit*)
! 559: case $host in
! 560: x86_64-*linux*)
! 561: LD="${LD-ld} -m elf_x86_64"
! 562: ;;
! 563: ppc*-*linux*|powerpc*-*linux*)
! 564: LD="${LD-ld} -m elf64ppc"
! 565: ;;
! 566: s390*-*linux*)
! 567: LD="${LD-ld} -m elf64_s390"
! 568: ;;
! 569: sparc*-*linux*)
! 570: LD="${LD-ld} -m elf64_sparc"
! 571: ;;
! 572: esac
! 573: ;;
! 574: esac
! 575: fi
! 576: rm -rf conftest*
! 577: ;;
1.1 ohara 578:
1.2 ! ohara 579: *-*-sco3.2v5*)
! 580: # On SCO OpenServer 5, we need -belf to get full-featured binaries.
! 581: SAVE_CFLAGS="$CFLAGS"
! 582: CFLAGS="$CFLAGS -belf"
! 583: AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
! 584: [AC_LANG_PUSH(C)
! 585: AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
! 586: AC_LANG_POP])
! 587: if test x"$lt_cv_cc_needs_belf" != x"yes"; then
! 588: # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
! 589: CFLAGS="$SAVE_CFLAGS"
! 590: fi
! 591: ;;
! 592: sparc*-*solaris*)
! 593: # Find out which ABI we are using.
! 594: echo 'int i;' > conftest.$ac_ext
! 595: if AC_TRY_EVAL(ac_compile); then
! 596: case `/usr/bin/file conftest.o` in
! 597: *64-bit*)
! 598: case $lt_cv_prog_gnu_ld in
! 599: yes*) LD="${LD-ld} -m elf64_sparc" ;;
! 600: *) LD="${LD-ld} -64" ;;
! 601: esac
! 602: ;;
! 603: esac
! 604: fi
! 605: rm -rf conftest*
! 606: ;;
! 607:
! 608: AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
! 609: [*-*-cygwin* | *-*-mingw* | *-*-pw32*)
! 610: AC_CHECK_TOOL(DLLTOOL, dlltool, false)
! 611: AC_CHECK_TOOL(AS, as, false)
! 612: AC_CHECK_TOOL(OBJDUMP, objdump, false)
! 613: ;;
! 614: ])
! 615: esac
1.1 ohara 616:
1.2 ! ohara 617: need_locks="$enable_libtool_lock"
1.1 ohara 618:
1.2 ! ohara 619: ])# _LT_AC_LOCK
1.1 ohara 620:
621:
1.2 ! ohara 622: # AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
! 623: # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
! 624: # ----------------------------------------------------------------
! 625: # Check whether the given compiler option works
! 626: AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
! 627: [AC_REQUIRE([LT_AC_PROG_SED])
! 628: AC_CACHE_CHECK([$1], [$2],
! 629: [$2=no
! 630: ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
! 631: printf "$lt_simple_compile_test_code" > conftest.$ac_ext
! 632: lt_compiler_flag="$3"
! 633: # Insert the option either (1) after the last *FLAGS variable, or
! 634: # (2) before a word containing "conftest.", or (3) at the end.
! 635: # Note that $ac_compile itself does not contain backslashes and begins
! 636: # with a dollar sign (not a hyphen), so the echo should work correctly.
! 637: # The option is referenced via a variable to avoid confusing sed.
! 638: lt_compile=`echo "$ac_compile" | $SED \
! 639: -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
! 640: -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
! 641: -e 's:$: $lt_compiler_flag:'`
! 642: (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
! 643: (eval "$lt_compile" 2>conftest.err)
! 644: ac_status=$?
! 645: cat conftest.err >&AS_MESSAGE_LOG_FD
! 646: echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
! 647: if (exit $ac_status) && test -s "$ac_outfile"; then
! 648: # The compiler can only warn and ignore the option if not recognized
! 649: # So say no if there are warnings other than the usual output.
! 650: $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
! 651: $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
! 652: if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
! 653: $2=yes
! 654: fi
! 655: fi
! 656: $rm conftest*
! 657: ])
1.1 ohara 658:
1.2 ! ohara 659: if test x"[$]$2" = xyes; then
! 660: ifelse([$5], , :, [$5])
1.1 ohara 661: else
1.2 ! ohara 662: ifelse([$6], , :, [$6])
1.1 ohara 663: fi
1.2 ! ohara 664: ])# AC_LIBTOOL_COMPILER_OPTION
! 665:
! 666:
! 667: # AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
! 668: # [ACTION-SUCCESS], [ACTION-FAILURE])
! 669: # ------------------------------------------------------------
! 670: # Check whether the given compiler option works
! 671: AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
! 672: [AC_CACHE_CHECK([$1], [$2],
! 673: [$2=no
! 674: save_LDFLAGS="$LDFLAGS"
! 675: LDFLAGS="$LDFLAGS $3"
! 676: printf "$lt_simple_link_test_code" > conftest.$ac_ext
! 677: if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
! 678: # The linker can only warn and ignore the option if not recognized
! 679: # So say no if there are warnings
! 680: if test -s conftest.err; then
! 681: # Append any errors to the config.log.
! 682: cat conftest.err 1>&AS_MESSAGE_LOG_FD
! 683: $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
! 684: $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
! 685: if diff conftest.exp conftest.er2 >/dev/null; then
! 686: $2=yes
! 687: fi
! 688: else
! 689: $2=yes
! 690: fi
! 691: fi
! 692: $rm conftest*
! 693: LDFLAGS="$save_LDFLAGS"
1.1 ohara 694: ])
695:
1.2 ! ohara 696: if test x"[$]$2" = xyes; then
! 697: ifelse([$4], , :, [$4])
! 698: else
! 699: ifelse([$5], , :, [$5])
! 700: fi
! 701: ])# AC_LIBTOOL_LINKER_OPTION
! 702:
! 703:
! 704: # AC_LIBTOOL_SYS_MAX_CMD_LEN
! 705: # --------------------------
! 706: AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
! 707: [# find the maximum length of command line arguments
! 708: AC_MSG_CHECKING([the maximum length of command line arguments])
! 709: AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
! 710: i=0
! 711: teststring="ABCD"
! 712:
! 713: case $build_os in
! 714: msdosdjgpp*)
! 715: # On DJGPP, this test can blow up pretty badly due to problems in libc
! 716: # (any single argument exceeding 2000 bytes causes a buffer overrun
! 717: # during glob expansion). Even if it were fixed, the result of this
! 718: # check would be larger than it should be.
! 719: lt_cv_sys_max_cmd_len=12288; # 12K is about right
! 720: ;;
! 721:
! 722: gnu*)
! 723: # Under GNU Hurd, this test is not required because there is
! 724: # no limit to the length of command line arguments.
! 725: # Libtool will interpret -1 as no limit whatsoever
! 726: lt_cv_sys_max_cmd_len=-1;
! 727: ;;
! 728:
! 729: cygwin* | mingw*)
! 730: # On Win9x/ME, this test blows up -- it succeeds, but takes
! 731: # about 5 minutes as the teststring grows exponentially.
! 732: # Worse, since 9x/ME are not pre-emptively multitasking,
! 733: # you end up with a "frozen" computer, even though with patience
! 734: # the test eventually succeeds (with a max line length of 256k).
! 735: # Instead, let's just punt: use the minimum linelength reported by
! 736: # all of the supported platforms: 8192 (on NT/2K/XP).
! 737: lt_cv_sys_max_cmd_len=8192;
! 738: ;;
! 739:
! 740: amigaos*)
! 741: # On AmigaOS with pdksh, this test takes hours, literally.
! 742: # So we just punt and use a minimum line length of 8192.
! 743: lt_cv_sys_max_cmd_len=8192;
! 744: ;;
! 745:
! 746: netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
! 747: # This has been around since 386BSD, at least. Likely further.
! 748: if test -x /sbin/sysctl; then
! 749: lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
! 750: elif test -x /usr/sbin/sysctl; then
! 751: lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
! 752: else
! 753: lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
! 754: fi
! 755: # And add a safety zone
! 756: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
! 757: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
! 758: ;;
! 759:
! 760: interix*)
! 761: # We know the value 262144 and hardcode it with a safety zone (like BSD)
! 762: lt_cv_sys_max_cmd_len=196608
! 763: ;;
1.1 ohara 764:
1.2 ! ohara 765: osf*)
! 766: # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
! 767: # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
! 768: # nice to cause kernel panics so lets avoid the loop below.
! 769: # First set a reasonable default.
! 770: lt_cv_sys_max_cmd_len=16384
! 771: #
! 772: if test -x /sbin/sysconfig; then
! 773: case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
! 774: *1*) lt_cv_sys_max_cmd_len=-1 ;;
! 775: esac
! 776: fi
! 777: ;;
! 778: sco3.2v5*)
! 779: lt_cv_sys_max_cmd_len=102400
! 780: ;;
! 781: sysv5* | sco5v6* | sysv4.2uw2*)
! 782: kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
! 783: if test -n "$kargmax"; then
! 784: lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
! 785: else
! 786: lt_cv_sys_max_cmd_len=32768
! 787: fi
! 788: ;;
! 789: *)
! 790: # If test is not a shell built-in, we'll probably end up computing a
! 791: # maximum length that is only half of the actual maximum length, but
! 792: # we can't tell.
! 793: SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
! 794: while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
! 795: = "XX$teststring") >/dev/null 2>&1 &&
! 796: new_result=`expr "X$teststring" : ".*" 2>&1` &&
! 797: lt_cv_sys_max_cmd_len=$new_result &&
! 798: test $i != 17 # 1/2 MB should be enough
! 799: do
! 800: i=`expr $i + 1`
! 801: teststring=$teststring$teststring
! 802: done
! 803: teststring=
! 804: # Add a significant safety factor because C++ compilers can tack on massive
! 805: # amounts of additional arguments before passing them to the linker.
! 806: # It appears as though 1/2 is a usable value.
! 807: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
! 808: ;;
! 809: esac
! 810: ])
! 811: if test -n $lt_cv_sys_max_cmd_len ; then
! 812: AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
1.1 ohara 813: else
1.2 ! ohara 814: AC_MSG_RESULT(none)
1.1 ohara 815: fi
1.2 ! ohara 816: ])# AC_LIBTOOL_SYS_MAX_CMD_LEN
1.1 ohara 817:
818:
1.2 ! ohara 819: # _LT_AC_CHECK_DLFCN
! 820: # ------------------
! 821: AC_DEFUN([_LT_AC_CHECK_DLFCN],
! 822: [AC_CHECK_HEADERS(dlfcn.h)dnl
! 823: ])# _LT_AC_CHECK_DLFCN
1.1 ohara 824:
825:
1.2 ! ohara 826: # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
! 827: # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
! 828: # ---------------------------------------------------------------------
! 829: AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
! 830: [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
! 831: if test "$cross_compiling" = yes; then :
! 832: [$4]
! 833: else
! 834: lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
! 835: lt_status=$lt_dlunknown
! 836: cat > conftest.$ac_ext <<EOF
! 837: [#line __oline__ "configure"
! 838: #include "confdefs.h"
! 839:
! 840: #if HAVE_DLFCN_H
! 841: #include <dlfcn.h>
! 842: #endif
! 843:
! 844: #include <stdio.h>
! 845:
! 846: #ifdef RTLD_GLOBAL
! 847: # define LT_DLGLOBAL RTLD_GLOBAL
! 848: #else
! 849: # ifdef DL_GLOBAL
! 850: # define LT_DLGLOBAL DL_GLOBAL
! 851: # else
! 852: # define LT_DLGLOBAL 0
! 853: # endif
! 854: #endif
! 855:
! 856: /* We may have to define LT_DLLAZY_OR_NOW in the command line if we
! 857: find out it does not work in some platform. */
! 858: #ifndef LT_DLLAZY_OR_NOW
! 859: # ifdef RTLD_LAZY
! 860: # define LT_DLLAZY_OR_NOW RTLD_LAZY
! 861: # else
! 862: # ifdef DL_LAZY
! 863: # define LT_DLLAZY_OR_NOW DL_LAZY
! 864: # else
! 865: # ifdef RTLD_NOW
! 866: # define LT_DLLAZY_OR_NOW RTLD_NOW
! 867: # else
! 868: # ifdef DL_NOW
! 869: # define LT_DLLAZY_OR_NOW DL_NOW
! 870: # else
! 871: # define LT_DLLAZY_OR_NOW 0
! 872: # endif
! 873: # endif
! 874: # endif
! 875: # endif
! 876: #endif
! 877:
! 878: #ifdef __cplusplus
! 879: extern "C" void exit (int);
! 880: #endif
! 881:
! 882: void fnord() { int i=42;}
! 883: int main ()
! 884: {
! 885: void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
! 886: int status = $lt_dlunknown;
! 887:
! 888: if (self)
! 889: {
! 890: if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
! 891: else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
! 892: /* dlclose (self); */
1.1 ohara 893: }
1.2 ! ohara 894: else
! 895: puts (dlerror ());
1.1 ohara 896:
1.2 ! ohara 897: exit (status);
! 898: }]
! 899: EOF
! 900: if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
! 901: (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
! 902: lt_status=$?
! 903: case x$lt_status in
! 904: x$lt_dlno_uscore) $1 ;;
! 905: x$lt_dlneed_uscore) $2 ;;
! 906: x$lt_dlunknown|x*) $3 ;;
! 907: esac
! 908: else :
! 909: # compilation failed
! 910: $3
! 911: fi
1.1 ohara 912: fi
1.2 ! ohara 913: rm -fr conftest*
! 914: ])# _LT_AC_TRY_DLOPEN_SELF
1.1 ohara 915:
916:
1.2 ! ohara 917: # AC_LIBTOOL_DLOPEN_SELF
! 918: # ----------------------
! 919: AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
! 920: [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
! 921: if test "x$enable_dlopen" != xyes; then
! 922: enable_dlopen=unknown
! 923: enable_dlopen_self=unknown
! 924: enable_dlopen_self_static=unknown
1.1 ohara 925: else
1.2 ! ohara 926: lt_cv_dlopen=no
! 927: lt_cv_dlopen_libs=
! 928:
! 929: case $host_os in
! 930: beos*)
! 931: lt_cv_dlopen="load_add_on"
! 932: lt_cv_dlopen_libs=
! 933: lt_cv_dlopen_self=yes
! 934: ;;
! 935:
! 936: mingw* | pw32*)
! 937: lt_cv_dlopen="LoadLibrary"
! 938: lt_cv_dlopen_libs=
! 939: ;;
! 940:
! 941: cygwin*)
! 942: lt_cv_dlopen="dlopen"
! 943: lt_cv_dlopen_libs=
! 944: ;;
! 945:
! 946: darwin*)
! 947: # if libdl is installed we need to link against it
! 948: AC_CHECK_LIB([dl], [dlopen],
! 949: [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
! 950: lt_cv_dlopen="dyld"
! 951: lt_cv_dlopen_libs=
! 952: lt_cv_dlopen_self=yes
! 953: ])
! 954: ;;
1.1 ohara 955:
1.2 ! ohara 956: *)
! 957: AC_CHECK_FUNC([shl_load],
! 958: [lt_cv_dlopen="shl_load"],
! 959: [AC_CHECK_LIB([dld], [shl_load],
! 960: [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
! 961: [AC_CHECK_FUNC([dlopen],
! 962: [lt_cv_dlopen="dlopen"],
! 963: [AC_CHECK_LIB([dl], [dlopen],
! 964: [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
! 965: [AC_CHECK_LIB([svld], [dlopen],
! 966: [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
! 967: [AC_CHECK_LIB([dld], [dld_link],
! 968: [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
! 969: ])
! 970: ])
! 971: ])
! 972: ])
! 973: ])
! 974: ;;
! 975: esac
1.1 ohara 976:
1.2 ! ohara 977: if test "x$lt_cv_dlopen" != xno; then
! 978: enable_dlopen=yes
! 979: else
! 980: enable_dlopen=no
! 981: fi
1.1 ohara 982:
1.2 ! ohara 983: case $lt_cv_dlopen in
! 984: dlopen)
! 985: save_CPPFLAGS="$CPPFLAGS"
! 986: test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
! 987:
! 988: save_LDFLAGS="$LDFLAGS"
! 989: wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
! 990:
! 991: save_LIBS="$LIBS"
! 992: LIBS="$lt_cv_dlopen_libs $LIBS"
! 993:
! 994: AC_CACHE_CHECK([whether a program can dlopen itself],
! 995: lt_cv_dlopen_self, [dnl
! 996: _LT_AC_TRY_DLOPEN_SELF(
! 997: lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
! 998: lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
! 999: ])
! 1000:
! 1001: if test "x$lt_cv_dlopen_self" = xyes; then
! 1002: wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
! 1003: AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
! 1004: lt_cv_dlopen_self_static, [dnl
! 1005: _LT_AC_TRY_DLOPEN_SELF(
! 1006: lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
! 1007: lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
! 1008: ])
! 1009: fi
1.1 ohara 1010:
1.2 ! ohara 1011: CPPFLAGS="$save_CPPFLAGS"
! 1012: LDFLAGS="$save_LDFLAGS"
! 1013: LIBS="$save_LIBS"
! 1014: ;;
! 1015: esac
1.1 ohara 1016:
1.2 ! ohara 1017: case $lt_cv_dlopen_self in
! 1018: yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
! 1019: *) enable_dlopen_self=unknown ;;
! 1020: esac
1.1 ohara 1021:
1.2 ! ohara 1022: case $lt_cv_dlopen_self_static in
! 1023: yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
! 1024: *) enable_dlopen_self_static=unknown ;;
! 1025: esac
! 1026: fi
! 1027: ])# AC_LIBTOOL_DLOPEN_SELF
1.1 ohara 1028:
1029:
1.2 ! ohara 1030: # AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
! 1031: # ---------------------------------
! 1032: # Check to see if options -c and -o are simultaneously supported by compiler
! 1033: AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
! 1034: [AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
! 1035: AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
! 1036: [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
! 1037: [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
! 1038: $rm -r conftest 2>/dev/null
! 1039: mkdir conftest
! 1040: cd conftest
! 1041: mkdir out
! 1042: printf "$lt_simple_compile_test_code" > conftest.$ac_ext
! 1043:
! 1044: lt_compiler_flag="-o out/conftest2.$ac_objext"
! 1045: # Insert the option either (1) after the last *FLAGS variable, or
! 1046: # (2) before a word containing "conftest.", or (3) at the end.
! 1047: # Note that $ac_compile itself does not contain backslashes and begins
! 1048: # with a dollar sign (not a hyphen), so the echo should work correctly.
! 1049: lt_compile=`echo "$ac_compile" | $SED \
! 1050: -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
! 1051: -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
! 1052: -e 's:$: $lt_compiler_flag:'`
! 1053: (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
! 1054: (eval "$lt_compile" 2>out/conftest.err)
! 1055: ac_status=$?
! 1056: cat out/conftest.err >&AS_MESSAGE_LOG_FD
! 1057: echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
! 1058: if (exit $ac_status) && test -s out/conftest2.$ac_objext
! 1059: then
! 1060: # The compiler can only warn and ignore the option if not recognized
! 1061: # So say no if there are warnings
! 1062: $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
! 1063: $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
! 1064: if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
! 1065: _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
! 1066: fi
! 1067: fi
! 1068: chmod u+w . 2>&AS_MESSAGE_LOG_FD
! 1069: $rm conftest*
! 1070: # SGI C++ compiler will create directory out/ii_files/ for
! 1071: # template instantiation
! 1072: test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
! 1073: $rm out/* && rmdir out
! 1074: cd ..
! 1075: rmdir conftest
! 1076: $rm conftest*
! 1077: ])
! 1078: ])# AC_LIBTOOL_PROG_CC_C_O
1.1 ohara 1079:
1080:
1.2 ! ohara 1081: # AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
! 1082: # -----------------------------------------
! 1083: # Check to see if we can do hard links to lock some files if needed
! 1084: AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
! 1085: [AC_REQUIRE([_LT_AC_LOCK])dnl
! 1086:
! 1087: hard_links="nottested"
! 1088: if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
! 1089: # do not overwrite the value of need_locks provided by the user
! 1090: AC_MSG_CHECKING([if we can lock with hard links])
! 1091: hard_links=yes
! 1092: $rm conftest*
! 1093: ln conftest.a conftest.b 2>/dev/null && hard_links=no
! 1094: touch conftest.a
! 1095: ln conftest.a conftest.b 2>&5 || hard_links=no
! 1096: ln conftest.a conftest.b 2>/dev/null && hard_links=no
! 1097: AC_MSG_RESULT([$hard_links])
! 1098: if test "$hard_links" = no; then
! 1099: AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
! 1100: need_locks=warn
! 1101: fi
! 1102: else
! 1103: need_locks=no
! 1104: fi
! 1105: ])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
1.1 ohara 1106:
1107:
1.2 ! ohara 1108: # AC_LIBTOOL_OBJDIR
! 1109: # -----------------
! 1110: AC_DEFUN([AC_LIBTOOL_OBJDIR],
! 1111: [AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
! 1112: [rm -f .libs 2>/dev/null
! 1113: mkdir .libs 2>/dev/null
! 1114: if test -d .libs; then
! 1115: lt_cv_objdir=.libs
! 1116: else
! 1117: # MS-DOS does not allow filenames that begin with a dot.
! 1118: lt_cv_objdir=_libs
! 1119: fi
! 1120: rmdir .libs 2>/dev/null])
! 1121: objdir=$lt_cv_objdir
! 1122: ])# AC_LIBTOOL_OBJDIR
1.1 ohara 1123:
1124:
1.2 ! ohara 1125: # AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
! 1126: # ----------------------------------------------
! 1127: # Check hardcoding attributes.
! 1128: AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
! 1129: [AC_MSG_CHECKING([how to hardcode library paths into programs])
! 1130: _LT_AC_TAGVAR(hardcode_action, $1)=
! 1131: if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
! 1132: test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
! 1133: test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
! 1134:
! 1135: # We can hardcode non-existant directories.
! 1136: if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
! 1137: # If the only mechanism to avoid hardcoding is shlibpath_var, we
! 1138: # have to relink, otherwise we might link with an installed library
! 1139: # when we should be linking with a yet-to-be-installed one
! 1140: ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
! 1141: test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
! 1142: # Linking always hardcodes the temporary library directory.
! 1143: _LT_AC_TAGVAR(hardcode_action, $1)=relink
! 1144: else
! 1145: # We can link without hardcoding, and we can hardcode nonexisting dirs.
! 1146: _LT_AC_TAGVAR(hardcode_action, $1)=immediate
! 1147: fi
! 1148: else
! 1149: # We cannot hardcode anything, or else we can only hardcode existing
! 1150: # directories.
! 1151: _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
! 1152: fi
! 1153: AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
! 1154:
! 1155: if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
! 1156: # Fast installation is not supported
! 1157: enable_fast_install=no
! 1158: elif test "$shlibpath_overrides_runpath" = yes ||
! 1159: test "$enable_shared" = no; then
! 1160: # Fast installation is not necessary
! 1161: enable_fast_install=needless
! 1162: fi
! 1163: ])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
! 1164:
! 1165:
! 1166: # AC_LIBTOOL_SYS_LIB_STRIP
! 1167: # ------------------------
! 1168: AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
! 1169: [striplib=
! 1170: old_striplib=
! 1171: AC_MSG_CHECKING([whether stripping libraries is possible])
! 1172: if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
! 1173: test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
! 1174: test -z "$striplib" && striplib="$STRIP --strip-unneeded"
! 1175: AC_MSG_RESULT([yes])
! 1176: else
! 1177: # FIXME - insert some real tests, host_os isn't really good enough
! 1178: case $host_os in
! 1179: darwin*)
! 1180: if test -n "$STRIP" ; then
! 1181: striplib="$STRIP -x"
! 1182: AC_MSG_RESULT([yes])
! 1183: else
! 1184: AC_MSG_RESULT([no])
! 1185: fi
! 1186: ;;
! 1187: *)
! 1188: AC_MSG_RESULT([no])
! 1189: ;;
! 1190: esac
! 1191: fi
! 1192: ])# AC_LIBTOOL_SYS_LIB_STRIP
! 1193:
! 1194:
! 1195: # AC_LIBTOOL_SYS_DYNAMIC_LINKER
! 1196: # -----------------------------
! 1197: # PORTME Fill in your ld.so characteristics
! 1198: AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
! 1199: [AC_MSG_CHECKING([dynamic linker characteristics])
! 1200: library_names_spec=
! 1201: libname_spec='lib$name'
! 1202: soname_spec=
! 1203: shrext_cmds=".so"
! 1204: postinstall_cmds=
! 1205: postuninstall_cmds=
! 1206: finish_cmds=
! 1207: finish_eval=
! 1208: shlibpath_var=
! 1209: shlibpath_overrides_runpath=unknown
! 1210: version_type=none
! 1211: dynamic_linker="$host_os ld.so"
! 1212: sys_lib_dlsearch_path_spec="/lib /usr/lib"
! 1213: if test "$GCC" = yes; then
! 1214: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
! 1215: if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
! 1216: # if the path contains ";" then we assume it to be the separator
! 1217: # otherwise default to the standard path separator (i.e. ":") - it is
! 1218: # assumed that no part of a normal pathname contains ";" but that should
! 1219: # okay in the real world where ";" in dirpaths is itself problematic.
! 1220: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
! 1221: else
! 1222: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
! 1223: fi
! 1224: else
! 1225: sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
! 1226: fi
! 1227: need_lib_prefix=unknown
! 1228: hardcode_into_libs=no
! 1229:
! 1230: # when you set need_version to no, make sure it does not cause -set_version
! 1231: # flags to be left without arguments
! 1232: need_version=unknown
! 1233:
! 1234: case $host_os in
! 1235: aix3*)
! 1236: version_type=linux
! 1237: library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
! 1238: shlibpath_var=LIBPATH
! 1239:
! 1240: # AIX 3 has no versioning support, so we append a major version to the name.
! 1241: soname_spec='${libname}${release}${shared_ext}$major'
! 1242: ;;
! 1243:
! 1244: aix4* | aix5*)
! 1245: version_type=linux
! 1246: need_lib_prefix=no
! 1247: need_version=no
! 1248: hardcode_into_libs=yes
! 1249: if test "$host_cpu" = ia64; then
! 1250: # AIX 5 supports IA64
! 1251: library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
! 1252: shlibpath_var=LD_LIBRARY_PATH
! 1253: else
! 1254: # With GCC up to 2.95.x, collect2 would create an import file
! 1255: # for dependence libraries. The import file would start with
! 1256: # the line `#! .'. This would cause the generated library to
! 1257: # depend on `.', always an invalid library. This was fixed in
! 1258: # development snapshots of GCC prior to 3.0.
! 1259: case $host_os in
! 1260: aix4 | aix4.[[01]] | aix4.[[01]].*)
! 1261: if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
! 1262: echo ' yes '
! 1263: echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
! 1264: :
! 1265: else
! 1266: can_build_shared=no
! 1267: fi
! 1268: ;;
! 1269: esac
! 1270: # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
! 1271: # soname into executable. Probably we can add versioning support to
! 1272: # collect2, so additional links can be useful in future.
! 1273: if test "$aix_use_runtimelinking" = yes; then
! 1274: # If using run time linking (on AIX 4.2 or later) use lib<name>.so
! 1275: # instead of lib<name>.a to let people know that these are not
! 1276: # typical AIX shared libraries.
! 1277: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1278: else
! 1279: # We preserve .a as extension for shared libraries through AIX4.2
! 1280: # and later when we are not doing run time linking.
! 1281: library_names_spec='${libname}${release}.a $libname.a'
! 1282: soname_spec='${libname}${release}${shared_ext}$major'
! 1283: fi
! 1284: shlibpath_var=LIBPATH
! 1285: fi
! 1286: ;;
! 1287:
! 1288: amigaos*)
! 1289: library_names_spec='$libname.ixlibrary $libname.a'
! 1290: # Create ${libname}_ixlibrary.a entries in /sys/libs.
! 1291: finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
! 1292: ;;
! 1293:
! 1294: beos*)
! 1295: library_names_spec='${libname}${shared_ext}'
! 1296: dynamic_linker="$host_os ld.so"
! 1297: shlibpath_var=LIBRARY_PATH
! 1298: ;;
! 1299:
! 1300: bsdi[[45]]*)
! 1301: version_type=linux
! 1302: need_version=no
! 1303: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1304: soname_spec='${libname}${release}${shared_ext}$major'
! 1305: finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
! 1306: shlibpath_var=LD_LIBRARY_PATH
! 1307: sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
! 1308: sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
! 1309: # the default ld.so.conf also contains /usr/contrib/lib and
! 1310: # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
! 1311: # libtool to hard-code these into programs
! 1312: ;;
! 1313:
! 1314: cygwin* | mingw* | pw32*)
! 1315: version_type=windows
! 1316: shrext_cmds=".dll"
! 1317: need_version=no
! 1318: need_lib_prefix=no
! 1319:
! 1320: case $GCC,$host_os in
! 1321: yes,cygwin* | yes,mingw* | yes,pw32*)
! 1322: library_names_spec='$libname.dll.a'
! 1323: # DLL is installed to $(libdir)/../bin by postinstall_cmds
! 1324: postinstall_cmds='base_file=`basename \${file}`~
! 1325: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
! 1326: dldir=$destdir/`dirname \$dlpath`~
! 1327: test -d \$dldir || mkdir -p \$dldir~
! 1328: $install_prog $dir/$dlname \$dldir/$dlname~
! 1329: chmod a+x \$dldir/$dlname'
! 1330: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
! 1331: dlpath=$dir/\$dldll~
! 1332: $rm \$dlpath'
! 1333: shlibpath_overrides_runpath=yes
! 1334:
! 1335: case $host_os in
! 1336: cygwin*)
! 1337: # Cygwin DLLs use 'cyg' prefix rather than 'lib'
! 1338: soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
! 1339: sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
! 1340: ;;
! 1341: mingw*)
! 1342: # MinGW DLLs use traditional 'lib' prefix
! 1343: soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
! 1344: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
! 1345: if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
! 1346: # It is most probably a Windows format PATH printed by
! 1347: # mingw gcc, but we are running on Cygwin. Gcc prints its search
! 1348: # path with ; separators, and with drive letters. We can handle the
! 1349: # drive letters (cygwin fileutils understands them), so leave them,
! 1350: # especially as we might pass files found there to a mingw objdump,
! 1351: # which wouldn't understand a cygwinified path. Ahh.
! 1352: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
! 1353: else
! 1354: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
! 1355: fi
! 1356: ;;
! 1357: pw32*)
! 1358: # pw32 DLLs use 'pw' prefix rather than 'lib'
! 1359: library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
! 1360: ;;
! 1361: esac
! 1362: ;;
! 1363:
! 1364: *)
! 1365: library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
! 1366: ;;
! 1367: esac
! 1368: dynamic_linker='Win32 ld.exe'
! 1369: # FIXME: first we should search . and the directory the executable is in
! 1370: shlibpath_var=PATH
! 1371: ;;
! 1372:
! 1373: darwin* | rhapsody*)
! 1374: dynamic_linker="$host_os dyld"
! 1375: version_type=darwin
! 1376: need_lib_prefix=no
! 1377: need_version=no
! 1378: library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
! 1379: soname_spec='${libname}${release}${major}$shared_ext'
! 1380: shlibpath_overrides_runpath=yes
! 1381: shlibpath_var=DYLD_LIBRARY_PATH
! 1382: shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
! 1383: # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
! 1384: if test "$GCC" = yes; then
! 1385: sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
! 1386: else
! 1387: sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
! 1388: fi
! 1389: sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
! 1390: ;;
! 1391:
! 1392: dgux*)
! 1393: version_type=linux
! 1394: need_lib_prefix=no
! 1395: need_version=no
! 1396: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
! 1397: soname_spec='${libname}${release}${shared_ext}$major'
! 1398: shlibpath_var=LD_LIBRARY_PATH
! 1399: ;;
! 1400:
! 1401: freebsd1*)
! 1402: dynamic_linker=no
! 1403: ;;
! 1404:
! 1405: kfreebsd*-gnu)
! 1406: version_type=linux
! 1407: need_lib_prefix=no
! 1408: need_version=no
! 1409: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
! 1410: soname_spec='${libname}${release}${shared_ext}$major'
! 1411: shlibpath_var=LD_LIBRARY_PATH
! 1412: shlibpath_overrides_runpath=no
! 1413: hardcode_into_libs=yes
! 1414: dynamic_linker='GNU ld.so'
! 1415: ;;
! 1416:
! 1417: freebsd* | dragonfly*)
! 1418: # DragonFly does not have aout. When/if they implement a new
! 1419: # versioning mechanism, adjust this.
! 1420: if test -x /usr/bin/objformat; then
! 1421: objformat=`/usr/bin/objformat`
! 1422: else
! 1423: case $host_os in
! 1424: freebsd[[123]]*) objformat=aout ;;
! 1425: *) objformat=elf ;;
! 1426: esac
! 1427: fi
! 1428: version_type=freebsd-$objformat
! 1429: case $version_type in
! 1430: freebsd-elf*)
! 1431: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
! 1432: need_version=no
! 1433: need_lib_prefix=no
! 1434: ;;
! 1435: freebsd-*)
! 1436: library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
! 1437: need_version=yes
! 1438: ;;
! 1439: esac
! 1440: shlibpath_var=LD_LIBRARY_PATH
! 1441: case $host_os in
! 1442: freebsd2*)
! 1443: shlibpath_overrides_runpath=yes
! 1444: ;;
! 1445: freebsd3.[[01]]* | freebsdelf3.[[01]]*)
! 1446: shlibpath_overrides_runpath=yes
! 1447: hardcode_into_libs=yes
! 1448: ;;
! 1449: freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
! 1450: freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
! 1451: shlibpath_overrides_runpath=no
! 1452: hardcode_into_libs=yes
! 1453: ;;
! 1454: freebsd*) # from 4.6 on
! 1455: shlibpath_overrides_runpath=yes
! 1456: hardcode_into_libs=yes
! 1457: ;;
! 1458: esac
! 1459: ;;
! 1460:
! 1461: gnu*)
! 1462: version_type=linux
! 1463: need_lib_prefix=no
! 1464: need_version=no
! 1465: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
! 1466: soname_spec='${libname}${release}${shared_ext}$major'
! 1467: shlibpath_var=LD_LIBRARY_PATH
! 1468: hardcode_into_libs=yes
! 1469: ;;
! 1470:
! 1471: hpux9* | hpux10* | hpux11*)
! 1472: # Give a soname corresponding to the major version so that dld.sl refuses to
! 1473: # link against other versions.
! 1474: version_type=sunos
! 1475: need_lib_prefix=no
! 1476: need_version=no
! 1477: case $host_cpu in
! 1478: ia64*)
! 1479: shrext_cmds='.so'
! 1480: hardcode_into_libs=yes
! 1481: dynamic_linker="$host_os dld.so"
! 1482: shlibpath_var=LD_LIBRARY_PATH
! 1483: shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
! 1484: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1485: soname_spec='${libname}${release}${shared_ext}$major'
! 1486: if test "X$HPUX_IA64_MODE" = X32; then
! 1487: sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
! 1488: else
! 1489: sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
! 1490: fi
! 1491: sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
! 1492: ;;
! 1493: hppa*64*)
! 1494: shrext_cmds='.sl'
! 1495: hardcode_into_libs=yes
! 1496: dynamic_linker="$host_os dld.sl"
! 1497: shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
! 1498: shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
! 1499: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1500: soname_spec='${libname}${release}${shared_ext}$major'
! 1501: sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
! 1502: sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
! 1503: ;;
! 1504: *)
! 1505: shrext_cmds='.sl'
! 1506: dynamic_linker="$host_os dld.sl"
! 1507: shlibpath_var=SHLIB_PATH
! 1508: shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
! 1509: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1510: soname_spec='${libname}${release}${shared_ext}$major'
! 1511: ;;
! 1512: esac
! 1513: # HP-UX runs *really* slowly unless shared libraries are mode 555.
! 1514: postinstall_cmds='chmod 555 $lib'
! 1515: ;;
! 1516:
! 1517: interix3*)
! 1518: version_type=linux
! 1519: need_lib_prefix=no
! 1520: need_version=no
! 1521: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
! 1522: soname_spec='${libname}${release}${shared_ext}$major'
! 1523: dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
! 1524: shlibpath_var=LD_LIBRARY_PATH
! 1525: shlibpath_overrides_runpath=no
! 1526: hardcode_into_libs=yes
! 1527: ;;
! 1528:
! 1529: irix5* | irix6* | nonstopux*)
! 1530: case $host_os in
! 1531: nonstopux*) version_type=nonstopux ;;
! 1532: *)
! 1533: if test "$lt_cv_prog_gnu_ld" = yes; then
! 1534: version_type=linux
! 1535: else
! 1536: version_type=irix
! 1537: fi ;;
! 1538: esac
! 1539: need_lib_prefix=no
! 1540: need_version=no
! 1541: soname_spec='${libname}${release}${shared_ext}$major'
! 1542: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
! 1543: case $host_os in
! 1544: irix5* | nonstopux*)
! 1545: libsuff= shlibsuff=
! 1546: ;;
! 1547: *)
! 1548: case $LD in # libtool.m4 will add one of these switches to LD
! 1549: *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
! 1550: libsuff= shlibsuff= libmagic=32-bit;;
! 1551: *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
! 1552: libsuff=32 shlibsuff=N32 libmagic=N32;;
! 1553: *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
! 1554: libsuff=64 shlibsuff=64 libmagic=64-bit;;
! 1555: *) libsuff= shlibsuff= libmagic=never-match;;
! 1556: esac
! 1557: ;;
! 1558: esac
! 1559: shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
! 1560: shlibpath_overrides_runpath=no
! 1561: sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
! 1562: sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
! 1563: hardcode_into_libs=yes
! 1564: ;;
! 1565:
! 1566: # No shared lib support for Linux oldld, aout, or coff.
! 1567: linux*oldld* | linux*aout* | linux*coff*)
! 1568: dynamic_linker=no
! 1569: ;;
! 1570:
! 1571: # This must be Linux ELF.
! 1572: linux*)
! 1573: version_type=linux
! 1574: need_lib_prefix=no
! 1575: need_version=no
! 1576: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1577: soname_spec='${libname}${release}${shared_ext}$major'
! 1578: finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
! 1579: shlibpath_var=LD_LIBRARY_PATH
! 1580: shlibpath_overrides_runpath=no
! 1581: # This implies no fast_install, which is unacceptable.
! 1582: # Some rework will be needed to allow for fast_install
! 1583: # before this can be enabled.
! 1584: hardcode_into_libs=yes
! 1585:
! 1586: # Append ld.so.conf contents to the search path
! 1587: if test -f /etc/ld.so.conf; then
! 1588: lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
! 1589: sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
! 1590: fi
! 1591:
! 1592: # We used to test for /lib/ld.so.1 and disable shared libraries on
! 1593: # powerpc, because MkLinux only supported shared libraries with the
! 1594: # GNU dynamic linker. Since this was broken with cross compilers,
! 1595: # most powerpc-linux boxes support dynamic linking these days and
! 1596: # people can always --disable-shared, the test was removed, and we
! 1597: # assume the GNU/Linux dynamic linker is in use.
! 1598: dynamic_linker='GNU/Linux ld.so'
! 1599: ;;
! 1600:
! 1601: knetbsd*-gnu)
! 1602: version_type=linux
! 1603: need_lib_prefix=no
! 1604: need_version=no
! 1605: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
! 1606: soname_spec='${libname}${release}${shared_ext}$major'
! 1607: shlibpath_var=LD_LIBRARY_PATH
! 1608: shlibpath_overrides_runpath=no
! 1609: hardcode_into_libs=yes
! 1610: dynamic_linker='GNU ld.so'
! 1611: ;;
! 1612:
! 1613: netbsd*)
! 1614: version_type=sunos
! 1615: need_lib_prefix=no
! 1616: need_version=no
! 1617: if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
! 1618: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
! 1619: finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
! 1620: dynamic_linker='NetBSD (a.out) ld.so'
! 1621: else
! 1622: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
! 1623: soname_spec='${libname}${release}${shared_ext}$major'
! 1624: dynamic_linker='NetBSD ld.elf_so'
! 1625: fi
! 1626: shlibpath_var=LD_LIBRARY_PATH
! 1627: shlibpath_overrides_runpath=yes
! 1628: hardcode_into_libs=yes
! 1629: ;;
! 1630:
! 1631: newsos6)
! 1632: version_type=linux
! 1633: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1634: shlibpath_var=LD_LIBRARY_PATH
! 1635: shlibpath_overrides_runpath=yes
! 1636: ;;
! 1637:
! 1638: nto-qnx*)
! 1639: version_type=linux
! 1640: need_lib_prefix=no
! 1641: need_version=no
! 1642: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1643: soname_spec='${libname}${release}${shared_ext}$major'
! 1644: shlibpath_var=LD_LIBRARY_PATH
! 1645: shlibpath_overrides_runpath=yes
! 1646: ;;
! 1647:
! 1648: openbsd*)
! 1649: version_type=sunos
! 1650: sys_lib_dlsearch_path_spec="/usr/lib"
! 1651: need_lib_prefix=no
! 1652: # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
! 1653: case $host_os in
! 1654: openbsd3.3 | openbsd3.3.*) need_version=yes ;;
! 1655: *) need_version=no ;;
! 1656: esac
! 1657: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
! 1658: finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
! 1659: shlibpath_var=LD_LIBRARY_PATH
! 1660: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
! 1661: case $host_os in
! 1662: openbsd2.[[89]] | openbsd2.[[89]].*)
! 1663: shlibpath_overrides_runpath=no
! 1664: ;;
! 1665: *)
! 1666: shlibpath_overrides_runpath=yes
! 1667: ;;
! 1668: esac
! 1669: else
! 1670: shlibpath_overrides_runpath=yes
! 1671: fi
! 1672: ;;
! 1673:
! 1674: os2*)
! 1675: libname_spec='$name'
! 1676: shrext_cmds=".dll"
! 1677: need_lib_prefix=no
! 1678: library_names_spec='$libname${shared_ext} $libname.a'
! 1679: dynamic_linker='OS/2 ld.exe'
! 1680: shlibpath_var=LIBPATH
! 1681: ;;
! 1682:
! 1683: osf3* | osf4* | osf5*)
! 1684: version_type=osf
! 1685: need_lib_prefix=no
! 1686: need_version=no
! 1687: soname_spec='${libname}${release}${shared_ext}$major'
! 1688: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1689: shlibpath_var=LD_LIBRARY_PATH
! 1690: sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
! 1691: sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
! 1692: ;;
! 1693:
! 1694: solaris*)
! 1695: version_type=linux
! 1696: need_lib_prefix=no
! 1697: need_version=no
! 1698: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1699: soname_spec='${libname}${release}${shared_ext}$major'
! 1700: shlibpath_var=LD_LIBRARY_PATH
! 1701: shlibpath_overrides_runpath=yes
! 1702: hardcode_into_libs=yes
! 1703: # ldd complains unless libraries are executable
! 1704: postinstall_cmds='chmod +x $lib'
! 1705: ;;
! 1706:
! 1707: sunos4*)
! 1708: version_type=sunos
! 1709: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
! 1710: finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
! 1711: shlibpath_var=LD_LIBRARY_PATH
! 1712: shlibpath_overrides_runpath=yes
! 1713: if test "$with_gnu_ld" = yes; then
! 1714: need_lib_prefix=no
! 1715: fi
! 1716: need_version=yes
! 1717: ;;
! 1718:
! 1719: sysv4 | sysv4.3*)
! 1720: version_type=linux
! 1721: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1722: soname_spec='${libname}${release}${shared_ext}$major'
! 1723: shlibpath_var=LD_LIBRARY_PATH
! 1724: case $host_vendor in
! 1725: sni)
! 1726: shlibpath_overrides_runpath=no
! 1727: need_lib_prefix=no
! 1728: export_dynamic_flag_spec='${wl}-Blargedynsym'
! 1729: runpath_var=LD_RUN_PATH
! 1730: ;;
! 1731: siemens)
! 1732: need_lib_prefix=no
! 1733: ;;
! 1734: motorola)
! 1735: need_lib_prefix=no
! 1736: need_version=no
! 1737: shlibpath_overrides_runpath=no
! 1738: sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
! 1739: ;;
! 1740: esac
! 1741: ;;
! 1742:
! 1743: sysv4*MP*)
! 1744: if test -d /usr/nec ;then
! 1745: version_type=linux
! 1746: library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
! 1747: soname_spec='$libname${shared_ext}.$major'
! 1748: shlibpath_var=LD_LIBRARY_PATH
1.1 ohara 1749: fi
1750: ;;
1751:
1.2 ! ohara 1752: sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
! 1753: version_type=freebsd-elf
! 1754: need_lib_prefix=no
! 1755: need_version=no
! 1756: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
! 1757: soname_spec='${libname}${release}${shared_ext}$major'
! 1758: shlibpath_var=LD_LIBRARY_PATH
! 1759: hardcode_into_libs=yes
! 1760: if test "$with_gnu_ld" = yes; then
! 1761: sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
! 1762: shlibpath_overrides_runpath=no
! 1763: else
! 1764: sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
! 1765: shlibpath_overrides_runpath=yes
! 1766: case $host_os in
! 1767: sco3.2v5*)
! 1768: sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
! 1769: ;;
! 1770: esac
1.1 ohara 1771: fi
1.2 ! ohara 1772: sys_lib_dlsearch_path_spec='/usr/lib'
! 1773: ;;
! 1774:
! 1775: uts4*)
! 1776: version_type=linux
! 1777: library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
! 1778: soname_spec='${libname}${release}${shared_ext}$major'
! 1779: shlibpath_var=LD_LIBRARY_PATH
1.1 ohara 1780: ;;
1781:
1.2 ! ohara 1782: *)
! 1783: dynamic_linker=no
1.1 ohara 1784: ;;
1785: esac
1.2 ! ohara 1786: AC_MSG_RESULT([$dynamic_linker])
! 1787: test "$dynamic_linker" = no && can_build_shared=no
! 1788:
! 1789: variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
! 1790: if test "$GCC" = yes; then
! 1791: variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
! 1792: fi
! 1793: ])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
! 1794:
! 1795:
! 1796: # _LT_AC_TAGCONFIG
! 1797: # ----------------
! 1798: AC_DEFUN([_LT_AC_TAGCONFIG],
! 1799: [AC_ARG_WITH([tags],
! 1800: [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
! 1801: [include additional configurations @<:@automatic@:>@])],
! 1802: [tagnames="$withval"])
! 1803:
! 1804: if test -f "$ltmain" && test -n "$tagnames"; then
! 1805: if test ! -f "${ofile}"; then
! 1806: AC_MSG_WARN([output file `$ofile' does not exist])
! 1807: fi
! 1808:
! 1809: if test -z "$LTCC"; then
! 1810: eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
! 1811: if test -z "$LTCC"; then
! 1812: AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
! 1813: else
! 1814: AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
! 1815: fi
! 1816: fi
! 1817: if test -z "$LTCFLAGS"; then
! 1818: eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
! 1819: fi
! 1820:
! 1821: # Extract list of available tagged configurations in $ofile.
! 1822: # Note that this assumes the entire list is on one line.
! 1823: available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
! 1824:
! 1825: lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
! 1826: for tagname in $tagnames; do
! 1827: IFS="$lt_save_ifs"
! 1828: # Check whether tagname contains only valid characters
! 1829: case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
! 1830: "") ;;
! 1831: *) AC_MSG_ERROR([invalid tag name: $tagname])
! 1832: ;;
! 1833: esac
! 1834:
! 1835: if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
! 1836: then
! 1837: AC_MSG_ERROR([tag name \"$tagname\" already exists])
! 1838: fi
! 1839:
! 1840: # Update the list of available tags.
! 1841: if test -n "$tagname"; then
! 1842: echo appending configuration tag \"$tagname\" to $ofile
! 1843:
! 1844: case $tagname in
! 1845: CXX)
! 1846: if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
! 1847: ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
! 1848: (test "X$CXX" != "Xg++"))) ; then
! 1849: AC_LIBTOOL_LANG_CXX_CONFIG
! 1850: else
! 1851: tagname=""
! 1852: fi
! 1853: ;;
! 1854:
! 1855: F77)
! 1856: if test -n "$F77" && test "X$F77" != "Xno"; then
! 1857: AC_LIBTOOL_LANG_F77_CONFIG
! 1858: else
! 1859: tagname=""
! 1860: fi
! 1861: ;;
! 1862:
! 1863: GCJ)
! 1864: if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
! 1865: AC_LIBTOOL_LANG_GCJ_CONFIG
! 1866: else
! 1867: tagname=""
! 1868: fi
! 1869: ;;
! 1870:
! 1871: RC)
! 1872: AC_LIBTOOL_LANG_RC_CONFIG
! 1873: ;;
! 1874:
! 1875: *)
! 1876: AC_MSG_ERROR([Unsupported tag name: $tagname])
! 1877: ;;
! 1878: esac
! 1879:
! 1880: # Append the new tag name to the list of available tags.
! 1881: if test -n "$tagname" ; then
! 1882: available_tags="$available_tags $tagname"
! 1883: fi
! 1884: fi
! 1885: done
! 1886: IFS="$lt_save_ifs"
! 1887:
! 1888: # Now substitute the updated list of available tags.
! 1889: if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
! 1890: mv "${ofile}T" "$ofile"
! 1891: chmod +x "$ofile"
! 1892: else
! 1893: rm -f "${ofile}T"
! 1894: AC_MSG_ERROR([unable to update list of available tagged configurations.])
! 1895: fi
! 1896: fi
! 1897: ])# _LT_AC_TAGCONFIG
! 1898:
! 1899:
! 1900: # AC_LIBTOOL_DLOPEN
! 1901: # -----------------
! 1902: # enable checks for dlopen support
! 1903: AC_DEFUN([AC_LIBTOOL_DLOPEN],
! 1904: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
! 1905: ])# AC_LIBTOOL_DLOPEN
! 1906:
! 1907:
! 1908: # AC_LIBTOOL_WIN32_DLL
! 1909: # --------------------
! 1910: # declare package support for building win32 DLLs
! 1911: AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
! 1912: [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
! 1913: ])# AC_LIBTOOL_WIN32_DLL
! 1914:
! 1915:
! 1916: # AC_ENABLE_SHARED([DEFAULT])
! 1917: # ---------------------------
! 1918: # implement the --enable-shared flag
! 1919: # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
! 1920: AC_DEFUN([AC_ENABLE_SHARED],
! 1921: [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
! 1922: AC_ARG_ENABLE([shared],
! 1923: [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
! 1924: [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
! 1925: [p=${PACKAGE-default}
! 1926: case $enableval in
! 1927: yes) enable_shared=yes ;;
! 1928: no) enable_shared=no ;;
! 1929: *)
! 1930: enable_shared=no
! 1931: # Look at the argument we got. We use all the common list separators.
! 1932: lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
! 1933: for pkg in $enableval; do
! 1934: IFS="$lt_save_ifs"
! 1935: if test "X$pkg" = "X$p"; then
! 1936: enable_shared=yes
! 1937: fi
! 1938: done
! 1939: IFS="$lt_save_ifs"
! 1940: ;;
! 1941: esac],
! 1942: [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
! 1943: ])# AC_ENABLE_SHARED
! 1944:
! 1945:
! 1946: # AC_DISABLE_SHARED
! 1947: # -----------------
! 1948: # set the default shared flag to --disable-shared
! 1949: AC_DEFUN([AC_DISABLE_SHARED],
! 1950: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
! 1951: AC_ENABLE_SHARED(no)
! 1952: ])# AC_DISABLE_SHARED
! 1953:
! 1954:
! 1955: # AC_ENABLE_STATIC([DEFAULT])
! 1956: # ---------------------------
! 1957: # implement the --enable-static flag
! 1958: # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
! 1959: AC_DEFUN([AC_ENABLE_STATIC],
! 1960: [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
! 1961: AC_ARG_ENABLE([static],
! 1962: [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
! 1963: [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
! 1964: [p=${PACKAGE-default}
! 1965: case $enableval in
! 1966: yes) enable_static=yes ;;
! 1967: no) enable_static=no ;;
! 1968: *)
! 1969: enable_static=no
! 1970: # Look at the argument we got. We use all the common list separators.
! 1971: lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
! 1972: for pkg in $enableval; do
! 1973: IFS="$lt_save_ifs"
! 1974: if test "X$pkg" = "X$p"; then
! 1975: enable_static=yes
! 1976: fi
! 1977: done
! 1978: IFS="$lt_save_ifs"
! 1979: ;;
! 1980: esac],
! 1981: [enable_static=]AC_ENABLE_STATIC_DEFAULT)
! 1982: ])# AC_ENABLE_STATIC
! 1983:
1.1 ohara 1984:
1.2 ! ohara 1985: # AC_DISABLE_STATIC
! 1986: # -----------------
! 1987: # set the default static flag to --disable-static
! 1988: AC_DEFUN([AC_DISABLE_STATIC],
! 1989: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
! 1990: AC_ENABLE_STATIC(no)
! 1991: ])# AC_DISABLE_STATIC
! 1992:
! 1993:
! 1994: # AC_ENABLE_FAST_INSTALL([DEFAULT])
! 1995: # ---------------------------------
! 1996: # implement the --enable-fast-install flag
! 1997: # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
! 1998: AC_DEFUN([AC_ENABLE_FAST_INSTALL],
! 1999: [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
! 2000: AC_ARG_ENABLE([fast-install],
! 2001: [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
! 2002: [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
! 2003: [p=${PACKAGE-default}
! 2004: case $enableval in
! 2005: yes) enable_fast_install=yes ;;
! 2006: no) enable_fast_install=no ;;
! 2007: *)
! 2008: enable_fast_install=no
! 2009: # Look at the argument we got. We use all the common list separators.
! 2010: lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
! 2011: for pkg in $enableval; do
! 2012: IFS="$lt_save_ifs"
! 2013: if test "X$pkg" = "X$p"; then
! 2014: enable_fast_install=yes
! 2015: fi
! 2016: done
! 2017: IFS="$lt_save_ifs"
! 2018: ;;
! 2019: esac],
! 2020: [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
! 2021: ])# AC_ENABLE_FAST_INSTALL
! 2022:
! 2023:
! 2024: # AC_DISABLE_FAST_INSTALL
! 2025: # -----------------------
! 2026: # set the default to --disable-fast-install
! 2027: AC_DEFUN([AC_DISABLE_FAST_INSTALL],
! 2028: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
! 2029: AC_ENABLE_FAST_INSTALL(no)
! 2030: ])# AC_DISABLE_FAST_INSTALL
! 2031:
! 2032:
! 2033: # AC_LIBTOOL_PICMODE([MODE])
! 2034: # --------------------------
! 2035: # implement the --with-pic flag
! 2036: # MODE is either `yes' or `no'. If omitted, it defaults to `both'.
! 2037: AC_DEFUN([AC_LIBTOOL_PICMODE],
! 2038: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
! 2039: pic_mode=ifelse($#,1,$1,default)
! 2040: ])# AC_LIBTOOL_PICMODE
1.1 ohara 2041:
2042:
1.2 ! ohara 2043: # AC_PROG_EGREP
! 2044: # -------------
! 2045: # This is predefined starting with Autoconf 2.54, so this conditional
! 2046: # definition can be removed once we require Autoconf 2.54 or later.
! 2047: m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
! 2048: [AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
! 2049: [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
! 2050: then ac_cv_prog_egrep='grep -E'
! 2051: else ac_cv_prog_egrep='egrep'
! 2052: fi])
! 2053: EGREP=$ac_cv_prog_egrep
! 2054: AC_SUBST([EGREP])
! 2055: ])])
! 2056:
! 2057:
! 2058: # AC_PATH_TOOL_PREFIX
! 2059: # -------------------
! 2060: # find a file program which can recognise shared library
! 2061: AC_DEFUN([AC_PATH_TOOL_PREFIX],
! 2062: [AC_REQUIRE([AC_PROG_EGREP])dnl
! 2063: AC_MSG_CHECKING([for $1])
! 2064: AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
! 2065: [case $MAGIC_CMD in
! 2066: [[\\/*] | ?:[\\/]*])
! 2067: lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
! 2068: ;;
1.1 ohara 2069: *)
1.2 ! ohara 2070: lt_save_MAGIC_CMD="$MAGIC_CMD"
! 2071: lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
! 2072: dnl $ac_dummy forces splitting on constant user-supplied paths.
! 2073: dnl POSIX.2 word splitting is done only on the output of word expansions,
! 2074: dnl not every word. This closes a longstanding sh security hole.
! 2075: ac_dummy="ifelse([$2], , $PATH, [$2])"
! 2076: for ac_dir in $ac_dummy; do
! 2077: IFS="$lt_save_ifs"
! 2078: test -z "$ac_dir" && ac_dir=.
! 2079: if test -f $ac_dir/$1; then
! 2080: lt_cv_path_MAGIC_CMD="$ac_dir/$1"
! 2081: if test -n "$file_magic_test_file"; then
! 2082: case $deplibs_check_method in
! 2083: "file_magic "*)
! 2084: file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
! 2085: MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
! 2086: if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
! 2087: $EGREP "$file_magic_regex" > /dev/null; then
! 2088: :
! 2089: else
! 2090: cat <<EOF 1>&2
! 2091:
! 2092: *** Warning: the command libtool uses to detect shared libraries,
! 2093: *** $file_magic_cmd, produces output that libtool cannot recognize.
! 2094: *** The result is that libtool may fail to recognize shared libraries
! 2095: *** as such. This will affect the creation of libtool libraries that
! 2096: *** depend on shared libraries, but programs linked with such libtool
! 2097: *** libraries will work regardless of this problem. Nevertheless, you
! 2098: *** may want to report the problem to your system manager and/or to
! 2099: *** bug-libtool@gnu.org
! 2100:
! 2101: EOF
! 2102: fi ;;
! 2103: esac
! 2104: fi
! 2105: break
1.1 ohara 2106: fi
2107: done
1.2 ! ohara 2108: IFS="$lt_save_ifs"
! 2109: MAGIC_CMD="$lt_save_MAGIC_CMD"
1.1 ohara 2110: ;;
1.2 ! ohara 2111: esac])
! 2112: MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
! 2113: if test -n "$MAGIC_CMD"; then
! 2114: AC_MSG_RESULT($MAGIC_CMD)
! 2115: else
! 2116: AC_MSG_RESULT(no)
! 2117: fi
! 2118: ])# AC_PATH_TOOL_PREFIX
! 2119:
! 2120:
! 2121: # AC_PATH_MAGIC
! 2122: # -------------
! 2123: # find a file program which can recognise a shared library
! 2124: AC_DEFUN([AC_PATH_MAGIC],
! 2125: [AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
! 2126: if test -z "$lt_cv_path_MAGIC_CMD"; then
! 2127: if test -n "$ac_tool_prefix"; then
! 2128: AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
! 2129: else
! 2130: MAGIC_CMD=:
! 2131: fi
! 2132: fi
! 2133: ])# AC_PATH_MAGIC
1.1 ohara 2134:
2135:
1.2 ! ohara 2136: # AC_PROG_LD
! 2137: # ----------
! 2138: # find the pathname to the GNU or non-GNU linker
! 2139: AC_DEFUN([AC_PROG_LD],
! 2140: [AC_ARG_WITH([gnu-ld],
! 2141: [AC_HELP_STRING([--with-gnu-ld],
! 2142: [assume the C compiler uses GNU ld @<:@default=no@:>@])],
! 2143: [test "$withval" = no || with_gnu_ld=yes],
! 2144: [with_gnu_ld=no])
! 2145: AC_REQUIRE([LT_AC_PROG_SED])dnl
1.1 ohara 2146: AC_REQUIRE([AC_PROG_CC])dnl
2147: AC_REQUIRE([AC_CANONICAL_HOST])dnl
2148: AC_REQUIRE([AC_CANONICAL_BUILD])dnl
2149: ac_prog=ld
1.2 ! ohara 2150: if test "$GCC" = yes; then
1.1 ohara 2151: # Check if gcc -print-prog-name=ld gives a path.
1.2 ! ohara 2152: AC_MSG_CHECKING([for ld used by $CC])
! 2153: case $host in
! 2154: *-*-mingw*)
! 2155: # gcc leaves a trailing carriage return which upsets mingw
! 2156: ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
! 2157: *)
! 2158: ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
! 2159: esac
! 2160: case $ac_prog in
1.1 ohara 2161: # Accept absolute paths.
1.2 ! ohara 2162: [[\\/]]* | ?:[[\\/]]*)
! 2163: re_direlt='/[[^/]][[^/]]*/\.\./'
! 2164: # Canonicalize the pathname of ld
! 2165: ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
1.1 ohara 2166: while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
1.2 ! ohara 2167: ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
1.1 ohara 2168: done
2169: test -z "$LD" && LD="$ac_prog"
2170: ;;
2171: "")
2172: # If it fails, then pretend we aren't using GCC.
2173: ac_prog=ld
2174: ;;
2175: *)
2176: # If it is relative, then search for the first ld in PATH.
2177: with_gnu_ld=unknown
2178: ;;
2179: esac
2180: elif test "$with_gnu_ld" = yes; then
2181: AC_MSG_CHECKING([for GNU ld])
2182: else
2183: AC_MSG_CHECKING([for non-GNU ld])
2184: fi
1.2 ! ohara 2185: AC_CACHE_VAL(lt_cv_path_LD,
1.1 ohara 2186: [if test -z "$LD"; then
1.2 ! ohara 2187: lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
1.1 ohara 2188: for ac_dir in $PATH; do
1.2 ! ohara 2189: IFS="$lt_save_ifs"
1.1 ohara 2190: test -z "$ac_dir" && ac_dir=.
2191: if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
1.2 ! ohara 2192: lt_cv_path_LD="$ac_dir/$ac_prog"
1.1 ohara 2193: # Check to see if the program is GNU ld. I'd rather use --version,
1.2 ! ohara 2194: # but apparently some variants of GNU ld only accept -v.
1.1 ohara 2195: # Break only if it was the GNU/non-GNU ld that we prefer.
1.2 ! ohara 2196: case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
! 2197: *GNU* | *'with BFD'*)
1.1 ohara 2198: test "$with_gnu_ld" != no && break
1.2 ! ohara 2199: ;;
! 2200: *)
1.1 ohara 2201: test "$with_gnu_ld" != yes && break
1.2 ! ohara 2202: ;;
! 2203: esac
1.1 ohara 2204: fi
2205: done
1.2 ! ohara 2206: IFS="$lt_save_ifs"
1.1 ohara 2207: else
1.2 ! ohara 2208: lt_cv_path_LD="$LD" # Let the user override the test with a path.
1.1 ohara 2209: fi])
1.2 ! ohara 2210: LD="$lt_cv_path_LD"
1.1 ohara 2211: if test -n "$LD"; then
2212: AC_MSG_RESULT($LD)
2213: else
2214: AC_MSG_RESULT(no)
2215: fi
2216: test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
2217: AC_PROG_LD_GNU
1.2 ! ohara 2218: ])# AC_PROG_LD
1.1 ohara 2219:
2220:
1.2 ! ohara 2221: # AC_PROG_LD_GNU
! 2222: # --------------
! 2223: AC_DEFUN([AC_PROG_LD_GNU],
! 2224: [AC_REQUIRE([AC_PROG_EGREP])dnl
! 2225: AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
! 2226: [# I'd rather use --version here, but apparently some GNU lds only accept -v.
! 2227: case `$LD -v 2>&1 </dev/null` in
! 2228: *GNU* | *'with BFD'*)
! 2229: lt_cv_prog_gnu_ld=yes
! 2230: ;;
! 2231: *)
! 2232: lt_cv_prog_gnu_ld=no
! 2233: ;;
! 2234: esac])
! 2235: with_gnu_ld=$lt_cv_prog_gnu_ld
! 2236: ])# AC_PROG_LD_GNU
! 2237:
! 2238:
! 2239: # AC_PROG_LD_RELOAD_FLAG
! 2240: # ----------------------
! 2241: # find reload flag for linker
! 2242: # -- PORTME Some linkers may need a different reload flag.
! 2243: AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
! 2244: [AC_CACHE_CHECK([for $LD option to reload object files],
! 2245: lt_cv_ld_reload_flag,
! 2246: [lt_cv_ld_reload_flag='-r'])
! 2247: reload_flag=$lt_cv_ld_reload_flag
! 2248: case $reload_flag in
! 2249: "" | " "*) ;;
! 2250: *) reload_flag=" $reload_flag" ;;
! 2251: esac
! 2252: reload_cmds='$LD$reload_flag -o $output$reload_objs'
! 2253: case $host_os in
! 2254: darwin*)
! 2255: if test "$GCC" = yes; then
! 2256: reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
! 2257: else
! 2258: reload_cmds='$LD$reload_flag -o $output$reload_objs'
1.1 ohara 2259: fi
1.2 ! ohara 2260: ;;
! 2261: esac
! 2262: ])# AC_PROG_LD_RELOAD_FLAG
! 2263:
! 2264:
! 2265: # AC_DEPLIBS_CHECK_METHOD
! 2266: # -----------------------
! 2267: # how to check for library dependencies
! 2268: # -- PORTME fill in with the dynamic library characteristics
! 2269: AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
! 2270: [AC_CACHE_CHECK([how to recognise dependent libraries],
! 2271: lt_cv_deplibs_check_method,
! 2272: [lt_cv_file_magic_cmd='$MAGIC_CMD'
! 2273: lt_cv_file_magic_test_file=
! 2274: lt_cv_deplibs_check_method='unknown'
! 2275: # Need to set the preceding variable on all platforms that support
! 2276: # interlibrary dependencies.
! 2277: # 'none' -- dependencies not supported.
! 2278: # `unknown' -- same as none, but documents that we really don't know.
! 2279: # 'pass_all' -- all dependencies passed with no checks.
! 2280: # 'test_compile' -- check by making test program.
! 2281: # 'file_magic [[regex]]' -- check by looking for files in library path
! 2282: # which responds to the $file_magic_cmd with a given extended regex.
! 2283: # If you have `file' or equivalent on your system and you're not sure
! 2284: # whether `pass_all' will *always* work, you probably want this one.
! 2285:
! 2286: case $host_os in
! 2287: aix4* | aix5*)
! 2288: lt_cv_deplibs_check_method=pass_all
! 2289: ;;
! 2290:
! 2291: beos*)
! 2292: lt_cv_deplibs_check_method=pass_all
! 2293: ;;
! 2294:
! 2295: bsdi[[45]]*)
! 2296: lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
! 2297: lt_cv_file_magic_cmd='/usr/bin/file -L'
! 2298: lt_cv_file_magic_test_file=/shlib/libc.so
! 2299: ;;
! 2300:
! 2301: cygwin*)
! 2302: # func_win32_libid is a shell function defined in ltmain.sh
! 2303: lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
! 2304: lt_cv_file_magic_cmd='func_win32_libid'
! 2305: ;;
! 2306:
! 2307: mingw* | pw32*)
! 2308: # Base MSYS/MinGW do not provide the 'file' command needed by
! 2309: # func_win32_libid shell function, so use a weaker test based on 'objdump'.
! 2310: lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
! 2311: lt_cv_file_magic_cmd='$OBJDUMP -f'
! 2312: ;;
1.1 ohara 2313:
1.2 ! ohara 2314: darwin* | rhapsody*)
! 2315: lt_cv_deplibs_check_method=pass_all
1.1 ohara 2316: ;;
1.2 ! ohara 2317:
! 2318: freebsd* | kfreebsd*-gnu | dragonfly*)
! 2319: if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
! 2320: case $host_cpu in
! 2321: i*86 )
! 2322: # Not sure whether the presence of OpenBSD here was a mistake.
! 2323: # Let's accept both of them until this is cleared up.
! 2324: lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
! 2325: lt_cv_file_magic_cmd=/usr/bin/file
! 2326: lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
! 2327: ;;
! 2328: esac
! 2329: else
! 2330: lt_cv_deplibs_check_method=pass_all
! 2331: fi
1.1 ohara 2332: ;;
1.2 ! ohara 2333:
! 2334: gnu*)
! 2335: lt_cv_deplibs_check_method=pass_all
1.1 ohara 2336: ;;
2337:
1.2 ! ohara 2338: hpux10.20* | hpux11*)
! 2339: lt_cv_file_magic_cmd=/usr/bin/file
! 2340: case $host_cpu in
! 2341: ia64*)
! 2342: lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
! 2343: lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
! 2344: ;;
! 2345: hppa*64*)
! 2346: [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
! 2347: lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
! 2348: ;;
! 2349: *)
! 2350: lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
! 2351: lt_cv_file_magic_test_file=/usr/lib/libc.sl
! 2352: ;;
! 2353: esac
! 2354: ;;
! 2355:
! 2356: interix3*)
! 2357: # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
! 2358: lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
! 2359: ;;
! 2360:
! 2361: irix5* | irix6* | nonstopux*)
! 2362: case $LD in
! 2363: *-32|*"-32 ") libmagic=32-bit;;
! 2364: *-n32|*"-n32 ") libmagic=N32;;
! 2365: *-64|*"-64 ") libmagic=64-bit;;
! 2366: *) libmagic=never-match;;
! 2367: esac
! 2368: lt_cv_deplibs_check_method=pass_all
! 2369: ;;
! 2370:
! 2371: # This must be Linux ELF.
! 2372: linux*)
! 2373: lt_cv_deplibs_check_method=pass_all
! 2374: ;;
! 2375:
! 2376: netbsd*)
! 2377: if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
! 2378: lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
! 2379: else
! 2380: lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
! 2381: fi
! 2382: ;;
! 2383:
! 2384: newos6*)
! 2385: lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
! 2386: lt_cv_file_magic_cmd=/usr/bin/file
! 2387: lt_cv_file_magic_test_file=/usr/lib/libnls.so
! 2388: ;;
! 2389:
! 2390: nto-qnx*)
! 2391: lt_cv_deplibs_check_method=unknown
! 2392: ;;
! 2393:
! 2394: openbsd*)
! 2395: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
! 2396: lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
! 2397: else
! 2398: lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
! 2399: fi
! 2400: ;;
! 2401:
! 2402: osf3* | osf4* | osf5*)
! 2403: lt_cv_deplibs_check_method=pass_all
! 2404: ;;
! 2405:
! 2406: solaris*)
! 2407: lt_cv_deplibs_check_method=pass_all
! 2408: ;;
! 2409:
! 2410: sysv4 | sysv4.3*)
! 2411: case $host_vendor in
! 2412: motorola)
! 2413: lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
! 2414: lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
! 2415: ;;
! 2416: ncr)
! 2417: lt_cv_deplibs_check_method=pass_all
! 2418: ;;
! 2419: sequent)
! 2420: lt_cv_file_magic_cmd='/bin/file'
! 2421: lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
! 2422: ;;
! 2423: sni)
! 2424: lt_cv_file_magic_cmd='/bin/file'
! 2425: lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
! 2426: lt_cv_file_magic_test_file=/lib/libc.so
! 2427: ;;
! 2428: siemens)
! 2429: lt_cv_deplibs_check_method=pass_all
! 2430: ;;
! 2431: pc)
! 2432: lt_cv_deplibs_check_method=pass_all
! 2433: ;;
! 2434: esac
! 2435: ;;
! 2436:
! 2437: sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
! 2438: lt_cv_deplibs_check_method=pass_all
! 2439: ;;
! 2440: esac
! 2441: ])
! 2442: file_magic_cmd=$lt_cv_file_magic_cmd
! 2443: deplibs_check_method=$lt_cv_deplibs_check_method
! 2444: test -z "$deplibs_check_method" && deplibs_check_method=unknown
! 2445: ])# AC_DEPLIBS_CHECK_METHOD
! 2446:
! 2447:
! 2448: # AC_PROG_NM
! 2449: # ----------
! 2450: # find the pathname to a BSD-compatible name lister
! 2451: AC_DEFUN([AC_PROG_NM],
! 2452: [AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
! 2453: [if test -n "$NM"; then
! 2454: # Let the user override the test.
! 2455: lt_cv_path_NM="$NM"
! 2456: else
! 2457: lt_nm_to_check="${ac_tool_prefix}nm"
! 2458: if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
! 2459: lt_nm_to_check="$lt_nm_to_check nm"
! 2460: fi
! 2461: for lt_tmp_nm in $lt_nm_to_check; do
! 2462: lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
! 2463: for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
! 2464: IFS="$lt_save_ifs"
! 2465: test -z "$ac_dir" && ac_dir=.
! 2466: tmp_nm="$ac_dir/$lt_tmp_nm"
! 2467: if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
! 2468: # Check to see if the nm accepts a BSD-compat flag.
! 2469: # Adding the `sed 1q' prevents false positives on HP-UX, which says:
! 2470: # nm: unknown option "B" ignored
! 2471: # Tru64's nm complains that /dev/null is an invalid object file
! 2472: case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
! 2473: */dev/null* | *'Invalid file or object type'*)
! 2474: lt_cv_path_NM="$tmp_nm -B"
! 2475: break
! 2476: ;;
! 2477: *)
! 2478: case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
! 2479: */dev/null*)
! 2480: lt_cv_path_NM="$tmp_nm -p"
! 2481: break
! 2482: ;;
! 2483: *)
! 2484: lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
! 2485: continue # so that we can try to find one that supports BSD flags
! 2486: ;;
! 2487: esac
! 2488: ;;
! 2489: esac
! 2490: fi
! 2491: done
! 2492: IFS="$lt_save_ifs"
! 2493: done
! 2494: test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
! 2495: fi])
! 2496: NM="$lt_cv_path_NM"
! 2497: ])# AC_PROG_NM
! 2498:
! 2499:
! 2500: # AC_CHECK_LIBM
! 2501: # -------------
! 2502: # check for math library
! 2503: AC_DEFUN([AC_CHECK_LIBM],
! 2504: [AC_REQUIRE([AC_CANONICAL_HOST])dnl
! 2505: LIBM=
! 2506: case $host in
! 2507: *-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
! 2508: # These system don't have libm, or don't need it
! 2509: ;;
! 2510: *-ncr-sysv4.3*)
! 2511: AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
! 2512: AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
! 2513: ;;
! 2514: *)
! 2515: AC_CHECK_LIB(m, cos, LIBM="-lm")
! 2516: ;;
! 2517: esac
! 2518: ])# AC_CHECK_LIBM
! 2519:
! 2520:
! 2521: # AC_LIBLTDL_CONVENIENCE([DIRECTORY])
! 2522: # -----------------------------------
! 2523: # sets LIBLTDL to the link flags for the libltdl convenience library and
! 2524: # LTDLINCL to the include flags for the libltdl header and adds
! 2525: # --enable-ltdl-convenience to the configure arguments. Note that
! 2526: # AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
! 2527: # it is assumed to be `libltdl'. LIBLTDL will be prefixed with
! 2528: # '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
! 2529: # (note the single quotes!). If your package is not flat and you're not
! 2530: # using automake, define top_builddir and top_srcdir appropriately in
! 2531: # the Makefiles.
! 2532: AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
! 2533: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
! 2534: case $enable_ltdl_convenience in
! 2535: no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
! 2536: "") enable_ltdl_convenience=yes
! 2537: ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
1.1 ohara 2538: esac
2539: LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
1.2 ! ohara 2540: LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
! 2541: # For backwards non-gettext consistent compatibility...
! 2542: INCLTDL="$LTDLINCL"
! 2543: ])# AC_LIBLTDL_CONVENIENCE
! 2544:
1.1 ohara 2545:
1.2 ! ohara 2546: # AC_LIBLTDL_INSTALLABLE([DIRECTORY])
! 2547: # -----------------------------------
! 2548: # sets LIBLTDL to the link flags for the libltdl installable library and
! 2549: # LTDLINCL to the include flags for the libltdl header and adds
! 2550: # --enable-ltdl-install to the configure arguments. Note that
! 2551: # AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
! 2552: # and an installed libltdl is not found, it is assumed to be `libltdl'.
! 2553: # LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
! 2554: # '${top_srcdir}/' (note the single quotes!). If your package is not
! 2555: # flat and you're not using automake, define top_builddir and top_srcdir
! 2556: # appropriately in the Makefiles.
1.1 ohara 2557: # In the future, this macro may have to be called after AC_PROG_LIBTOOL.
1.2 ! ohara 2558: AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
! 2559: [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
! 2560: AC_CHECK_LIB(ltdl, lt_dlinit,
1.1 ohara 2561: [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
2562: [if test x"$enable_ltdl_install" = xno; then
2563: AC_MSG_WARN([libltdl not installed, but installation disabled])
2564: else
2565: enable_ltdl_install=yes
2566: fi
2567: ])
2568: if test x"$enable_ltdl_install" = x"yes"; then
2569: ac_configure_args="$ac_configure_args --enable-ltdl-install"
2570: LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
1.2 ! ohara 2571: LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
1.1 ohara 2572: else
2573: ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
2574: LIBLTDL="-lltdl"
1.2 ! ohara 2575: LTDLINCL=
! 2576: fi
! 2577: # For backwards non-gettext consistent compatibility...
! 2578: INCLTDL="$LTDLINCL"
! 2579: ])# AC_LIBLTDL_INSTALLABLE
! 2580:
! 2581:
! 2582: # AC_LIBTOOL_CXX
! 2583: # --------------
! 2584: # enable support for C++ libraries
! 2585: AC_DEFUN([AC_LIBTOOL_CXX],
! 2586: [AC_REQUIRE([_LT_AC_LANG_CXX])
! 2587: ])# AC_LIBTOOL_CXX
! 2588:
! 2589:
! 2590: # _LT_AC_LANG_CXX
! 2591: # ---------------
! 2592: AC_DEFUN([_LT_AC_LANG_CXX],
! 2593: [AC_REQUIRE([AC_PROG_CXX])
! 2594: AC_REQUIRE([_LT_AC_PROG_CXXCPP])
! 2595: _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
! 2596: ])# _LT_AC_LANG_CXX
! 2597:
! 2598: # _LT_AC_PROG_CXXCPP
! 2599: # ------------------
! 2600: AC_DEFUN([_LT_AC_PROG_CXXCPP],
! 2601: [
! 2602: AC_REQUIRE([AC_PROG_CXX])
! 2603: if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
! 2604: ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
! 2605: (test "X$CXX" != "Xg++"))) ; then
! 2606: AC_PROG_CXXCPP
! 2607: fi
! 2608: ])# _LT_AC_PROG_CXXCPP
! 2609:
! 2610: # AC_LIBTOOL_F77
! 2611: # --------------
! 2612: # enable support for Fortran 77 libraries
! 2613: AC_DEFUN([AC_LIBTOOL_F77],
! 2614: [AC_REQUIRE([_LT_AC_LANG_F77])
! 2615: ])# AC_LIBTOOL_F77
! 2616:
! 2617:
! 2618: # _LT_AC_LANG_F77
! 2619: # ---------------
! 2620: AC_DEFUN([_LT_AC_LANG_F77],
! 2621: [AC_REQUIRE([AC_PROG_F77])
! 2622: _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
! 2623: ])# _LT_AC_LANG_F77
! 2624:
! 2625:
! 2626: # AC_LIBTOOL_GCJ
! 2627: # --------------
! 2628: # enable support for GCJ libraries
! 2629: AC_DEFUN([AC_LIBTOOL_GCJ],
! 2630: [AC_REQUIRE([_LT_AC_LANG_GCJ])
! 2631: ])# AC_LIBTOOL_GCJ
! 2632:
! 2633:
! 2634: # _LT_AC_LANG_GCJ
! 2635: # ---------------
! 2636: AC_DEFUN([_LT_AC_LANG_GCJ],
! 2637: [AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
! 2638: [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
! 2639: [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
! 2640: [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
! 2641: [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
! 2642: [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
! 2643: _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
! 2644: ])# _LT_AC_LANG_GCJ
! 2645:
! 2646:
! 2647: # AC_LIBTOOL_RC
! 2648: # -------------
! 2649: # enable support for Windows resource files
! 2650: AC_DEFUN([AC_LIBTOOL_RC],
! 2651: [AC_REQUIRE([LT_AC_PROG_RC])
! 2652: _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
! 2653: ])# AC_LIBTOOL_RC
! 2654:
! 2655:
! 2656: # AC_LIBTOOL_LANG_C_CONFIG
! 2657: # ------------------------
! 2658: # Ensure that the configuration vars for the C compiler are
! 2659: # suitably defined. Those variables are subsequently used by
! 2660: # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
! 2661: AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
! 2662: AC_DEFUN([_LT_AC_LANG_C_CONFIG],
! 2663: [lt_save_CC="$CC"
! 2664: AC_LANG_PUSH(C)
! 2665:
! 2666: # Source file extension for C test sources.
! 2667: ac_ext=c
! 2668:
! 2669: # Object file extension for compiled C test sources.
! 2670: objext=o
! 2671: _LT_AC_TAGVAR(objext, $1)=$objext
! 2672:
! 2673: # Code to be used in simple compile tests
! 2674: lt_simple_compile_test_code="int some_variable = 0;\n"
! 2675:
! 2676: # Code to be used in simple link tests
! 2677: lt_simple_link_test_code='int main(){return(0);}\n'
! 2678:
! 2679: _LT_AC_SYS_COMPILER
! 2680:
! 2681: # save warnings/boilerplate of simple test code
! 2682: _LT_COMPILER_BOILERPLATE
! 2683: _LT_LINKER_BOILERPLATE
! 2684:
! 2685: AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
! 2686: AC_LIBTOOL_PROG_COMPILER_PIC($1)
! 2687: AC_LIBTOOL_PROG_CC_C_O($1)
! 2688: AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
! 2689: AC_LIBTOOL_PROG_LD_SHLIBS($1)
! 2690: AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
! 2691: AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
! 2692: AC_LIBTOOL_SYS_LIB_STRIP
! 2693: AC_LIBTOOL_DLOPEN_SELF
! 2694:
! 2695: # Report which library types will actually be built
! 2696: AC_MSG_CHECKING([if libtool supports shared libraries])
! 2697: AC_MSG_RESULT([$can_build_shared])
! 2698:
! 2699: AC_MSG_CHECKING([whether to build shared libraries])
! 2700: test "$can_build_shared" = "no" && enable_shared=no
! 2701:
! 2702: # On AIX, shared libraries and static libraries use the same namespace, and
! 2703: # are all built from PIC.
! 2704: case $host_os in
! 2705: aix3*)
! 2706: test "$enable_shared" = yes && enable_static=no
! 2707: if test -n "$RANLIB"; then
! 2708: archive_cmds="$archive_cmds~\$RANLIB \$lib"
! 2709: postinstall_cmds='$RANLIB $lib'
! 2710: fi
! 2711: ;;
! 2712:
! 2713: aix4* | aix5*)
! 2714: if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
! 2715: test "$enable_shared" = yes && enable_static=no
! 2716: fi
! 2717: ;;
! 2718: esac
! 2719: AC_MSG_RESULT([$enable_shared])
! 2720:
! 2721: AC_MSG_CHECKING([whether to build static libraries])
! 2722: # Make sure either enable_shared or enable_static is yes.
! 2723: test "$enable_shared" = yes || enable_static=yes
! 2724: AC_MSG_RESULT([$enable_static])
! 2725:
! 2726: AC_LIBTOOL_CONFIG($1)
! 2727:
! 2728: AC_LANG_POP
! 2729: CC="$lt_save_CC"
! 2730: ])# AC_LIBTOOL_LANG_C_CONFIG
! 2731:
! 2732:
! 2733: # AC_LIBTOOL_LANG_CXX_CONFIG
! 2734: # --------------------------
! 2735: # Ensure that the configuration vars for the C compiler are
! 2736: # suitably defined. Those variables are subsequently used by
! 2737: # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
! 2738: AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
! 2739: AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
! 2740: [AC_LANG_PUSH(C++)
! 2741: AC_REQUIRE([AC_PROG_CXX])
! 2742: AC_REQUIRE([_LT_AC_PROG_CXXCPP])
! 2743:
! 2744: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 2745: _LT_AC_TAGVAR(allow_undefined_flag, $1)=
! 2746: _LT_AC_TAGVAR(always_export_symbols, $1)=no
! 2747: _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
! 2748: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
! 2749: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 2750: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
! 2751: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
! 2752: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
! 2753: _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
! 2754: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
! 2755: _LT_AC_TAGVAR(hardcode_automatic, $1)=no
! 2756: _LT_AC_TAGVAR(module_cmds, $1)=
! 2757: _LT_AC_TAGVAR(module_expsym_cmds, $1)=
! 2758: _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
! 2759: _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
! 2760: _LT_AC_TAGVAR(no_undefined_flag, $1)=
! 2761: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
! 2762: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
! 2763:
! 2764: # Dependencies to place before and after the object being linked:
! 2765: _LT_AC_TAGVAR(predep_objects, $1)=
! 2766: _LT_AC_TAGVAR(postdep_objects, $1)=
! 2767: _LT_AC_TAGVAR(predeps, $1)=
! 2768: _LT_AC_TAGVAR(postdeps, $1)=
! 2769: _LT_AC_TAGVAR(compiler_lib_search_path, $1)=
! 2770:
! 2771: # Source file extension for C++ test sources.
! 2772: ac_ext=cpp
! 2773:
! 2774: # Object file extension for compiled C++ test sources.
! 2775: objext=o
! 2776: _LT_AC_TAGVAR(objext, $1)=$objext
! 2777:
! 2778: # Code to be used in simple compile tests
! 2779: lt_simple_compile_test_code="int some_variable = 0;\n"
! 2780:
! 2781: # Code to be used in simple link tests
! 2782: lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n'
! 2783:
! 2784: # ltmain only uses $CC for tagged configurations so make sure $CC is set.
! 2785: _LT_AC_SYS_COMPILER
! 2786:
! 2787: # save warnings/boilerplate of simple test code
! 2788: _LT_COMPILER_BOILERPLATE
! 2789: _LT_LINKER_BOILERPLATE
! 2790:
! 2791: # Allow CC to be a program name with arguments.
! 2792: lt_save_CC=$CC
! 2793: lt_save_LD=$LD
! 2794: lt_save_GCC=$GCC
! 2795: GCC=$GXX
! 2796: lt_save_with_gnu_ld=$with_gnu_ld
! 2797: lt_save_path_LD=$lt_cv_path_LD
! 2798: if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
! 2799: lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
! 2800: else
! 2801: $as_unset lt_cv_prog_gnu_ld
! 2802: fi
! 2803: if test -n "${lt_cv_path_LDCXX+set}"; then
! 2804: lt_cv_path_LD=$lt_cv_path_LDCXX
! 2805: else
! 2806: $as_unset lt_cv_path_LD
! 2807: fi
! 2808: test -z "${LDCXX+set}" || LD=$LDCXX
! 2809: CC=${CXX-"c++"}
! 2810: compiler=$CC
! 2811: _LT_AC_TAGVAR(compiler, $1)=$CC
! 2812: _LT_CC_BASENAME([$compiler])
! 2813:
! 2814: # We don't want -fno-exception wen compiling C++ code, so set the
! 2815: # no_builtin_flag separately
! 2816: if test "$GXX" = yes; then
! 2817: _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
! 2818: else
! 2819: _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
! 2820: fi
! 2821:
! 2822: if test "$GXX" = yes; then
! 2823: # Set up default GNU C++ configuration
! 2824:
! 2825: AC_PROG_LD
! 2826:
! 2827: # Check if GNU C++ uses GNU ld as the underlying linker, since the
! 2828: # archiving commands below assume that GNU ld is being used.
! 2829: if test "$with_gnu_ld" = yes; then
! 2830: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 2831: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
! 2832:
! 2833: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
! 2834: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
! 2835:
! 2836: # If archive_cmds runs LD, not CC, wlarc should be empty
! 2837: # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
! 2838: # investigate it a little bit more. (MM)
! 2839: wlarc='${wl}'
! 2840:
! 2841: # ancient GNU ld didn't support --whole-archive et. al.
! 2842: if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
! 2843: grep 'no-whole-archive' > /dev/null; then
! 2844: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
! 2845: else
! 2846: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
! 2847: fi
! 2848: else
! 2849: with_gnu_ld=no
! 2850: wlarc=
! 2851:
! 2852: # A generic and very simple default shared library creation
! 2853: # command for GNU C++ for the case where it uses the native
! 2854: # linker, instead of GNU ld. If possible, this setting should
! 2855: # overridden to take advantage of the native linker features on
! 2856: # the platform it is being used on.
! 2857: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
1.1 ohara 2858: fi
1.2 ! ohara 2859:
! 2860: # Commands to make compiler produce verbose output that lists
! 2861: # what "hidden" libraries, object files and flags are used when
! 2862: # linking a shared library.
! 2863: output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
! 2864:
! 2865: else
! 2866: GXX=no
! 2867: with_gnu_ld=no
! 2868: wlarc=
! 2869: fi
! 2870:
! 2871: # PORTME: fill in a description of your system's C++ link characteristics
! 2872: AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
! 2873: _LT_AC_TAGVAR(ld_shlibs, $1)=yes
! 2874: case $host_os in
! 2875: aix3*)
! 2876: # FIXME: insert proper C++ library support
! 2877: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 2878: ;;
! 2879: aix4* | aix5*)
! 2880: if test "$host_cpu" = ia64; then
! 2881: # On IA64, the linker does run time linking by default, so we don't
! 2882: # have to do anything special.
! 2883: aix_use_runtimelinking=no
! 2884: exp_sym_flag='-Bexport'
! 2885: no_entry_flag=""
! 2886: else
! 2887: aix_use_runtimelinking=no
! 2888:
! 2889: # Test if we are trying to use run time linking or normal
! 2890: # AIX style linking. If -brtl is somewhere in LDFLAGS, we
! 2891: # need to do runtime linking.
! 2892: case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
! 2893: for ld_flag in $LDFLAGS; do
! 2894: case $ld_flag in
! 2895: *-brtl*)
! 2896: aix_use_runtimelinking=yes
! 2897: break
! 2898: ;;
! 2899: esac
! 2900: done
! 2901: ;;
! 2902: esac
! 2903:
! 2904: exp_sym_flag='-bexport'
! 2905: no_entry_flag='-bnoentry'
! 2906: fi
! 2907:
! 2908: # When large executables or shared objects are built, AIX ld can
! 2909: # have problems creating the table of contents. If linking a library
! 2910: # or program results in "error TOC overflow" add -mminimal-toc to
! 2911: # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
! 2912: # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
! 2913:
! 2914: _LT_AC_TAGVAR(archive_cmds, $1)=''
! 2915: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 2916: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
! 2917: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 2918:
! 2919: if test "$GXX" = yes; then
! 2920: case $host_os in aix4.[[012]]|aix4.[[012]].*)
! 2921: # We only want to do this on AIX 4.2 and lower, the check
! 2922: # below for broken collect2 doesn't work under 4.3+
! 2923: collect2name=`${CC} -print-prog-name=collect2`
! 2924: if test -f "$collect2name" && \
! 2925: strings "$collect2name" | grep resolve_lib_name >/dev/null
! 2926: then
! 2927: # We have reworked collect2
! 2928: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 2929: else
! 2930: # We have old collect2
! 2931: _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
! 2932: # It fails to find uninstalled libraries when the uninstalled
! 2933: # path is not listed in the libpath. Setting hardcode_minus_L
! 2934: # to unsupported forces relinking
! 2935: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 2936: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 2937: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
! 2938: fi
! 2939: ;;
! 2940: esac
! 2941: shared_flag='-shared'
! 2942: if test "$aix_use_runtimelinking" = yes; then
! 2943: shared_flag="$shared_flag "'${wl}-G'
! 2944: fi
! 2945: else
! 2946: # not using gcc
! 2947: if test "$host_cpu" = ia64; then
! 2948: # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
! 2949: # chokes on -Wl,-G. The following line is correct:
! 2950: shared_flag='-G'
! 2951: else
! 2952: if test "$aix_use_runtimelinking" = yes; then
! 2953: shared_flag='${wl}-G'
! 2954: else
! 2955: shared_flag='${wl}-bM:SRE'
! 2956: fi
! 2957: fi
! 2958: fi
! 2959:
! 2960: # It seems that -bexpall does not export symbols beginning with
! 2961: # underscore (_), so it is better to generate a list of symbols to export.
! 2962: _LT_AC_TAGVAR(always_export_symbols, $1)=yes
! 2963: if test "$aix_use_runtimelinking" = yes; then
! 2964: # Warning - without using the other runtime loading flags (-brtl),
! 2965: # -berok will link without error, but may produce a broken library.
! 2966: _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
! 2967: # Determine the default libpath from the value encoded in an empty executable.
! 2968: _LT_AC_SYS_LIBPATH_AIX
! 2969: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
! 2970:
! 2971: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
! 2972: else
! 2973: if test "$host_cpu" = ia64; then
! 2974: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
! 2975: _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
! 2976: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
! 2977: else
! 2978: # Determine the default libpath from the value encoded in an empty executable.
! 2979: _LT_AC_SYS_LIBPATH_AIX
! 2980: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
! 2981: # Warning - without using the other run time loading flags,
! 2982: # -berok will link without error, but may produce a broken library.
! 2983: _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
! 2984: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
! 2985: # Exported symbols can be pulled into shared objects from archives
! 2986: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
! 2987: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
! 2988: # This is similar to how AIX traditionally builds its shared libraries.
! 2989: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
! 2990: fi
! 2991: fi
! 2992: ;;
! 2993:
! 2994: beos*)
! 2995: if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
! 2996: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 2997: # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
! 2998: # support --undefined. This deserves some investigation. FIXME
! 2999: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 3000: else
! 3001: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3002: fi
! 3003: ;;
! 3004:
! 3005: chorus*)
! 3006: case $cc_basename in
! 3007: *)
! 3008: # FIXME: insert proper C++ library support
! 3009: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3010: ;;
! 3011: esac
! 3012: ;;
! 3013:
! 3014: cygwin* | mingw* | pw32*)
! 3015: # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
! 3016: # as there is no search path for DLLs.
! 3017: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 3018: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 3019: _LT_AC_TAGVAR(always_export_symbols, $1)=no
! 3020: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
! 3021:
! 3022: if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
! 3023: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
! 3024: # If the export-symbols file already is a .def file (1st line
! 3025: # is EXPORTS), use it as is; otherwise, prepend...
! 3026: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
! 3027: cp $export_symbols $output_objdir/$soname.def;
! 3028: else
! 3029: echo EXPORTS > $output_objdir/$soname.def;
! 3030: cat $export_symbols >> $output_objdir/$soname.def;
! 3031: fi~
! 3032: $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
! 3033: else
! 3034: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3035: fi
! 3036: ;;
! 3037: darwin* | rhapsody*)
! 3038: case $host_os in
! 3039: rhapsody* | darwin1.[[012]])
! 3040: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
! 3041: ;;
! 3042: *) # Darwin 1.3 on
! 3043: if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
! 3044: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
! 3045: else
! 3046: case ${MACOSX_DEPLOYMENT_TARGET} in
! 3047: 10.[[012]])
! 3048: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
! 3049: ;;
! 3050: 10.*)
! 3051: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
! 3052: ;;
! 3053: esac
! 3054: fi
! 3055: ;;
! 3056: esac
! 3057: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 3058: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 3059: _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
! 3060: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
! 3061: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
! 3062: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 3063:
! 3064: if test "$GXX" = yes ; then
! 3065: lt_int_apple_cc_single_mod=no
! 3066: output_verbose_link_cmd='echo'
! 3067: if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
! 3068: lt_int_apple_cc_single_mod=yes
! 3069: fi
! 3070: if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
! 3071: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
! 3072: else
! 3073: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
! 3074: fi
! 3075: _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
! 3076: # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
! 3077: if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
! 3078: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 3079: else
! 3080: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 3081: fi
! 3082: _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 3083: else
! 3084: case $cc_basename in
! 3085: xlc*)
! 3086: output_verbose_link_cmd='echo'
! 3087: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
! 3088: _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
! 3089: # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
! 3090: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 3091: _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 3092: ;;
! 3093: *)
! 3094: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3095: ;;
! 3096: esac
! 3097: fi
! 3098: ;;
! 3099:
! 3100: dgux*)
! 3101: case $cc_basename in
! 3102: ec++*)
! 3103: # FIXME: insert proper C++ library support
! 3104: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3105: ;;
! 3106: ghcx*)
! 3107: # Green Hills C++ Compiler
! 3108: # FIXME: insert proper C++ library support
! 3109: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3110: ;;
! 3111: *)
! 3112: # FIXME: insert proper C++ library support
! 3113: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3114: ;;
! 3115: esac
! 3116: ;;
! 3117: freebsd[[12]]*)
! 3118: # C++ shared libraries reported to be fairly broken before switch to ELF
! 3119: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3120: ;;
! 3121: freebsd-elf*)
! 3122: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 3123: ;;
! 3124: freebsd* | kfreebsd*-gnu | dragonfly*)
! 3125: # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
! 3126: # conventions
! 3127: _LT_AC_TAGVAR(ld_shlibs, $1)=yes
! 3128: ;;
! 3129: gnu*)
! 3130: ;;
! 3131: hpux9*)
! 3132: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
! 3133: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3134: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 3135: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 3136: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
! 3137: # but as the default
! 3138: # location of the library.
! 3139:
! 3140: case $cc_basename in
! 3141: CC*)
! 3142: # FIXME: insert proper C++ library support
! 3143: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3144: ;;
! 3145: aCC*)
! 3146: _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
! 3147: # Commands to make compiler produce verbose output that lists
! 3148: # what "hidden" libraries, object files and flags are used when
! 3149: # linking a shared library.
! 3150: #
! 3151: # There doesn't appear to be a way to prevent this compiler from
! 3152: # explicitly linking system object files so we need to strip them
! 3153: # from the output so that they don't get included in the library
! 3154: # dependencies.
! 3155: output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
! 3156: ;;
! 3157: *)
! 3158: if test "$GXX" = yes; then
! 3159: _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
! 3160: else
! 3161: # FIXME: insert proper C++ library support
! 3162: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3163: fi
! 3164: ;;
! 3165: esac
! 3166: ;;
! 3167: hpux10*|hpux11*)
! 3168: if test $with_gnu_ld = no; then
! 3169: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
! 3170: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3171:
! 3172: case $host_cpu in
! 3173: hppa*64*|ia64*)
! 3174: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
! 3175: ;;
! 3176: *)
! 3177: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 3178: ;;
! 3179: esac
! 3180: fi
! 3181: case $host_cpu in
! 3182: hppa*64*|ia64*)
! 3183: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 3184: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3185: ;;
! 3186: *)
! 3187: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 3188: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
! 3189: # but as the default
! 3190: # location of the library.
! 3191: ;;
! 3192: esac
! 3193:
! 3194: case $cc_basename in
! 3195: CC*)
! 3196: # FIXME: insert proper C++ library support
! 3197: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3198: ;;
! 3199: aCC*)
! 3200: case $host_cpu in
! 3201: hppa*64*)
! 3202: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3203: ;;
! 3204: ia64*)
! 3205: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3206: ;;
! 3207: *)
! 3208: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3209: ;;
! 3210: esac
! 3211: # Commands to make compiler produce verbose output that lists
! 3212: # what "hidden" libraries, object files and flags are used when
! 3213: # linking a shared library.
! 3214: #
! 3215: # There doesn't appear to be a way to prevent this compiler from
! 3216: # explicitly linking system object files so we need to strip them
! 3217: # from the output so that they don't get included in the library
! 3218: # dependencies.
! 3219: output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
! 3220: ;;
! 3221: *)
! 3222: if test "$GXX" = yes; then
! 3223: if test $with_gnu_ld = no; then
! 3224: case $host_cpu in
! 3225: hppa*64*)
! 3226: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3227: ;;
! 3228: ia64*)
! 3229: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3230: ;;
! 3231: *)
! 3232: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3233: ;;
! 3234: esac
! 3235: fi
! 3236: else
! 3237: # FIXME: insert proper C++ library support
! 3238: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3239: fi
! 3240: ;;
! 3241: esac
! 3242: ;;
! 3243: interix3*)
! 3244: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 3245: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3246: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 3247: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 3248: # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
! 3249: # Instead, shared libraries are loaded at an image base (0x10000000 by
! 3250: # default) and relocated if they conflict, which is a slow very memory
! 3251: # consuming and fragmenting process. To avoid this, we pick a random,
! 3252: # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
! 3253: # time. Moving up from 0x10000000 also allows more sbrk(2) space.
! 3254: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
! 3255: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
! 3256: ;;
! 3257: irix5* | irix6*)
! 3258: case $cc_basename in
! 3259: CC*)
! 3260: # SGI C++
! 3261: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
! 3262:
! 3263: # Archives containing C++ object files must be created using
! 3264: # "CC -ar", where "CC" is the IRIX C++ compiler. This is
! 3265: # necessary to make sure instantiated templates are included
! 3266: # in the archive.
! 3267: _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
! 3268: ;;
! 3269: *)
! 3270: if test "$GXX" = yes; then
! 3271: if test "$with_gnu_ld" = no; then
! 3272: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
! 3273: else
! 3274: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
! 3275: fi
! 3276: fi
! 3277: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 3278: ;;
! 3279: esac
! 3280: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 3281: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3282: ;;
! 3283: linux*)
! 3284: case $cc_basename in
! 3285: KCC*)
! 3286: # Kuck and Associates, Inc. (KAI) C++ Compiler
! 3287:
! 3288: # KCC will only create a shared library if the output file
! 3289: # ends with ".so" (or ".sl" for HP-UX), so rename the library
! 3290: # to its proper name (with version) after linking.
! 3291: _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
! 3292: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
! 3293: # Commands to make compiler produce verbose output that lists
! 3294: # what "hidden" libraries, object files and flags are used when
! 3295: # linking a shared library.
! 3296: #
! 3297: # There doesn't appear to be a way to prevent this compiler from
! 3298: # explicitly linking system object files so we need to strip them
! 3299: # from the output so that they don't get included in the library
! 3300: # dependencies.
! 3301: output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
! 3302:
! 3303: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
! 3304: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
! 3305:
! 3306: # Archives containing C++ object files must be created using
! 3307: # "CC -Bstatic", where "CC" is the KAI C++ compiler.
! 3308: _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
! 3309: ;;
! 3310: icpc*)
! 3311: # Intel C++
! 3312: with_gnu_ld=yes
! 3313: # version 8.0 and above of icpc choke on multiply defined symbols
! 3314: # if we add $predep_objects and $postdep_objects, however 7.1 and
! 3315: # earlier do not add the objects themselves.
! 3316: case `$CC -V 2>&1` in
! 3317: *"Version 7."*)
! 3318: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 3319: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
! 3320: ;;
! 3321: *) # Version 8.0 or newer
! 3322: tmp_idyn=
! 3323: case $host_cpu in
! 3324: ia64*) tmp_idyn=' -i_dynamic';;
! 3325: esac
! 3326: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 3327: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
! 3328: ;;
! 3329: esac
! 3330: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 3331: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 3332: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
! 3333: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
! 3334: ;;
! 3335: pgCC*)
! 3336: # Portland Group C++ compiler
! 3337: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
! 3338: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
! 3339:
! 3340: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
! 3341: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
! 3342: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
! 3343: ;;
! 3344: cxx*)
! 3345: # Compaq C++
! 3346: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 3347: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
! 3348:
! 3349: runpath_var=LD_RUN_PATH
! 3350: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
! 3351: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3352:
! 3353: # Commands to make compiler produce verbose output that lists
! 3354: # what "hidden" libraries, object files and flags are used when
! 3355: # linking a shared library.
! 3356: #
! 3357: # There doesn't appear to be a way to prevent this compiler from
! 3358: # explicitly linking system object files so we need to strip them
! 3359: # from the output so that they don't get included in the library
! 3360: # dependencies.
! 3361: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
! 3362: ;;
! 3363: esac
! 3364: ;;
! 3365: lynxos*)
! 3366: # FIXME: insert proper C++ library support
! 3367: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3368: ;;
! 3369: m88k*)
! 3370: # FIXME: insert proper C++ library support
! 3371: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3372: ;;
! 3373: mvs*)
! 3374: case $cc_basename in
! 3375: cxx*)
! 3376: # FIXME: insert proper C++ library support
! 3377: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3378: ;;
! 3379: *)
! 3380: # FIXME: insert proper C++ library support
! 3381: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3382: ;;
! 3383: esac
! 3384: ;;
! 3385: netbsd*)
! 3386: if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
! 3387: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
! 3388: wlarc=
! 3389: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 3390: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 3391: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3392: fi
! 3393: # Workaround some broken pre-1.5 toolchains
! 3394: output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
! 3395: ;;
! 3396: openbsd2*)
! 3397: # C++ shared libraries are fairly broken
! 3398: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3399: ;;
! 3400: openbsd*)
! 3401: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 3402: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3403: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
! 3404: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 3405: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
! 3406: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
! 3407: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 3408: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
! 3409: fi
! 3410: output_verbose_link_cmd='echo'
! 3411: ;;
! 3412: osf3*)
! 3413: case $cc_basename in
! 3414: KCC*)
! 3415: # Kuck and Associates, Inc. (KAI) C++ Compiler
! 3416:
! 3417: # KCC will only create a shared library if the output file
! 3418: # ends with ".so" (or ".sl" for HP-UX), so rename the library
! 3419: # to its proper name (with version) after linking.
! 3420: _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
! 3421:
! 3422: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 3423: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3424:
! 3425: # Archives containing C++ object files must be created using
! 3426: # "CC -Bstatic", where "CC" is the KAI C++ compiler.
! 3427: _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
! 3428:
! 3429: ;;
! 3430: RCC*)
! 3431: # Rational C++ 2.4.1
! 3432: # FIXME: insert proper C++ library support
! 3433: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3434: ;;
! 3435: cxx*)
! 3436: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
! 3437: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
! 3438:
! 3439: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 3440: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3441:
! 3442: # Commands to make compiler produce verbose output that lists
! 3443: # what "hidden" libraries, object files and flags are used when
! 3444: # linking a shared library.
! 3445: #
! 3446: # There doesn't appear to be a way to prevent this compiler from
! 3447: # explicitly linking system object files so we need to strip them
! 3448: # from the output so that they don't get included in the library
! 3449: # dependencies.
! 3450: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
! 3451: ;;
! 3452: *)
! 3453: if test "$GXX" = yes && test "$with_gnu_ld" = no; then
! 3454: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
! 3455: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
! 3456:
! 3457: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 3458: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3459:
! 3460: # Commands to make compiler produce verbose output that lists
! 3461: # what "hidden" libraries, object files and flags are used when
! 3462: # linking a shared library.
! 3463: output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
! 3464:
! 3465: else
! 3466: # FIXME: insert proper C++ library support
! 3467: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3468: fi
! 3469: ;;
! 3470: esac
! 3471: ;;
! 3472: osf4* | osf5*)
! 3473: case $cc_basename in
! 3474: KCC*)
! 3475: # Kuck and Associates, Inc. (KAI) C++ Compiler
! 3476:
! 3477: # KCC will only create a shared library if the output file
! 3478: # ends with ".so" (or ".sl" for HP-UX), so rename the library
! 3479: # to its proper name (with version) after linking.
! 3480: _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
! 3481:
! 3482: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 3483: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3484:
! 3485: # Archives containing C++ object files must be created using
! 3486: # the KAI C++ compiler.
! 3487: _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
! 3488: ;;
! 3489: RCC*)
! 3490: # Rational C++ 2.4.1
! 3491: # FIXME: insert proper C++ library support
! 3492: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3493: ;;
! 3494: cxx*)
! 3495: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
! 3496: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
! 3497: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
! 3498: echo "-hidden">> $lib.exp~
! 3499: $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
! 3500: $rm $lib.exp'
! 3501:
! 3502: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
! 3503: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3504:
! 3505: # Commands to make compiler produce verbose output that lists
! 3506: # what "hidden" libraries, object files and flags are used when
! 3507: # linking a shared library.
! 3508: #
! 3509: # There doesn't appear to be a way to prevent this compiler from
! 3510: # explicitly linking system object files so we need to strip them
! 3511: # from the output so that they don't get included in the library
! 3512: # dependencies.
! 3513: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
! 3514: ;;
! 3515: *)
! 3516: if test "$GXX" = yes && test "$with_gnu_ld" = no; then
! 3517: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
! 3518: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
! 3519:
! 3520: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 3521: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 3522:
! 3523: # Commands to make compiler produce verbose output that lists
! 3524: # what "hidden" libraries, object files and flags are used when
! 3525: # linking a shared library.
! 3526: output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
! 3527:
! 3528: else
! 3529: # FIXME: insert proper C++ library support
! 3530: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3531: fi
! 3532: ;;
! 3533: esac
! 3534: ;;
! 3535: psos*)
! 3536: # FIXME: insert proper C++ library support
! 3537: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3538: ;;
! 3539: sunos4*)
! 3540: case $cc_basename in
! 3541: CC*)
! 3542: # Sun C++ 4.x
! 3543: # FIXME: insert proper C++ library support
! 3544: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3545: ;;
! 3546: lcc*)
! 3547: # Lucid
! 3548: # FIXME: insert proper C++ library support
! 3549: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3550: ;;
! 3551: *)
! 3552: # FIXME: insert proper C++ library support
! 3553: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3554: ;;
! 3555: esac
! 3556: ;;
! 3557: solaris*)
! 3558: case $cc_basename in
! 3559: CC*)
! 3560: # Sun C++ 4.2, 5.x and Centerline C++
! 3561: _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
! 3562: _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
! 3563: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
! 3564: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
! 3565: $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
! 3566:
! 3567: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 3568: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3569: case $host_os in
! 3570: solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
! 3571: *)
! 3572: # The C++ compiler is used as linker so we must use $wl
! 3573: # flag to pass the commands to the underlying system
! 3574: # linker. We must also pass each convience library through
! 3575: # to the system linker between allextract/defaultextract.
! 3576: # The C++ compiler will combine linker options so we
! 3577: # cannot just pass the convience library names through
! 3578: # without $wl.
! 3579: # Supported since Solaris 2.6 (maybe 2.5.1?)
! 3580: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
! 3581: ;;
! 3582: esac
! 3583: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 3584:
! 3585: output_verbose_link_cmd='echo'
! 3586:
! 3587: # Archives containing C++ object files must be created using
! 3588: # "CC -xar", where "CC" is the Sun C++ compiler. This is
! 3589: # necessary to make sure instantiated templates are included
! 3590: # in the archive.
! 3591: _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
! 3592: ;;
! 3593: gcx*)
! 3594: # Green Hills C++ Compiler
! 3595: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
! 3596:
! 3597: # The C++ compiler must be used to create the archive.
! 3598: _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
! 3599: ;;
! 3600: *)
! 3601: # GNU C++ compiler with Solaris linker
! 3602: if test "$GXX" = yes && test "$with_gnu_ld" = no; then
! 3603: _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
! 3604: if $CC --version | grep -v '^2\.7' > /dev/null; then
! 3605: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
! 3606: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
! 3607: $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
! 3608:
! 3609: # Commands to make compiler produce verbose output that lists
! 3610: # what "hidden" libraries, object files and flags are used when
! 3611: # linking a shared library.
! 3612: output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
! 3613: else
! 3614: # g++ 2.7 appears to require `-G' NOT `-shared' on this
! 3615: # platform.
! 3616: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
! 3617: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
! 3618: $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
! 3619:
! 3620: # Commands to make compiler produce verbose output that lists
! 3621: # what "hidden" libraries, object files and flags are used when
! 3622: # linking a shared library.
! 3623: output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
! 3624: fi
! 3625:
! 3626: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
! 3627: fi
! 3628: ;;
! 3629: esac
! 3630: ;;
! 3631: sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
! 3632: _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
! 3633: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 3634: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3635: runpath_var='LD_RUN_PATH'
! 3636:
! 3637: case $cc_basename in
! 3638: CC*)
! 3639: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3640: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3641: ;;
! 3642: *)
! 3643: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3644: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3645: ;;
! 3646: esac
! 3647: ;;
! 3648: sysv5* | sco3.2v5* | sco5v6*)
! 3649: # Note: We can NOT use -z defs as we might desire, because we do not
! 3650: # link with -lc, and that would cause any symbols used from libc to
! 3651: # always be unresolved, which means just about no library would
! 3652: # ever link correctly. If we're not using GNU ld we use -z text
! 3653: # though, which does catch some bad symbols but isn't as heavy-handed
! 3654: # as -z defs.
! 3655: # For security reasons, it is highly recommended that you always
! 3656: # use absolute paths for naming shared libraries, and exclude the
! 3657: # DT_RUNPATH tag from executables and libraries. But doing so
! 3658: # requires that you compile everything twice, which is a pain.
! 3659: # So that behaviour is only enabled if SCOABSPATH is set to a
! 3660: # non-empty value in the environment. Most likely only useful for
! 3661: # creating official distributions of packages.
! 3662: # This is a hack until libtool officially supports absolute path
! 3663: # names for shared libraries.
! 3664: _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
! 3665: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
! 3666: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 3667: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 3668: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
! 3669: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
! 3670: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 3671: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
! 3672: runpath_var='LD_RUN_PATH'
! 3673:
! 3674: case $cc_basename in
! 3675: CC*)
! 3676: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3677: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3678: ;;
! 3679: *)
! 3680: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3681: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 3682: ;;
! 3683: esac
! 3684: ;;
! 3685: tandem*)
! 3686: case $cc_basename in
! 3687: NCC*)
! 3688: # NonStop-UX NCC 3.20
! 3689: # FIXME: insert proper C++ library support
! 3690: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3691: ;;
! 3692: *)
! 3693: # FIXME: insert proper C++ library support
! 3694: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3695: ;;
! 3696: esac
! 3697: ;;
! 3698: vxworks*)
! 3699: # FIXME: insert proper C++ library support
! 3700: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3701: ;;
! 3702: *)
! 3703: # FIXME: insert proper C++ library support
! 3704: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 3705: ;;
! 3706: esac
! 3707: AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
! 3708: test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
! 3709:
! 3710: _LT_AC_TAGVAR(GCC, $1)="$GXX"
! 3711: _LT_AC_TAGVAR(LD, $1)="$LD"
! 3712:
! 3713: AC_LIBTOOL_POSTDEP_PREDEP($1)
! 3714: AC_LIBTOOL_PROG_COMPILER_PIC($1)
! 3715: AC_LIBTOOL_PROG_CC_C_O($1)
! 3716: AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
! 3717: AC_LIBTOOL_PROG_LD_SHLIBS($1)
! 3718: AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
! 3719: AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
! 3720:
! 3721: AC_LIBTOOL_CONFIG($1)
! 3722:
! 3723: AC_LANG_POP
! 3724: CC=$lt_save_CC
! 3725: LDCXX=$LD
! 3726: LD=$lt_save_LD
! 3727: GCC=$lt_save_GCC
! 3728: with_gnu_ldcxx=$with_gnu_ld
! 3729: with_gnu_ld=$lt_save_with_gnu_ld
! 3730: lt_cv_path_LDCXX=$lt_cv_path_LD
! 3731: lt_cv_path_LD=$lt_save_path_LD
! 3732: lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
! 3733: lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
! 3734: ])# AC_LIBTOOL_LANG_CXX_CONFIG
! 3735:
! 3736: # AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
! 3737: # ------------------------------------
! 3738: # Figure out "hidden" library dependencies from verbose
! 3739: # compiler output when linking a shared library.
! 3740: # Parse the compiler output and extract the necessary
! 3741: # objects, libraries and library flags.
! 3742: AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
! 3743: dnl we can't use the lt_simple_compile_test_code here,
! 3744: dnl because it contains code intended for an executable,
! 3745: dnl not a library. It's possible we should let each
! 3746: dnl tag define a new lt_????_link_test_code variable,
! 3747: dnl but it's only used here...
! 3748: ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
! 3749: int a;
! 3750: void foo (void) { a = 0; }
! 3751: EOF
! 3752: ],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
! 3753: class Foo
! 3754: {
! 3755: public:
! 3756: Foo (void) { a = 0; }
! 3757: private:
! 3758: int a;
! 3759: };
! 3760: EOF
! 3761: ],[$1],[F77],[cat > conftest.$ac_ext <<EOF
! 3762: subroutine foo
! 3763: implicit none
! 3764: integer*4 a
! 3765: a=0
! 3766: return
! 3767: end
! 3768: EOF
! 3769: ],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
! 3770: public class foo {
! 3771: private int a;
! 3772: public void bar (void) {
! 3773: a = 0;
! 3774: }
! 3775: };
! 3776: EOF
! 3777: ])
! 3778: dnl Parse the compiler output and extract the necessary
! 3779: dnl objects, libraries and library flags.
! 3780: if AC_TRY_EVAL(ac_compile); then
! 3781: # Parse the compiler output and extract the necessary
! 3782: # objects, libraries and library flags.
! 3783:
! 3784: # Sentinel used to keep track of whether or not we are before
! 3785: # the conftest object file.
! 3786: pre_test_object_deps_done=no
! 3787:
! 3788: # The `*' in the case matches for architectures that use `case' in
! 3789: # $output_verbose_cmd can trigger glob expansion during the loop
! 3790: # eval without this substitution.
! 3791: output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
! 3792:
! 3793: for p in `eval $output_verbose_link_cmd`; do
! 3794: case $p in
! 3795:
! 3796: -L* | -R* | -l*)
! 3797: # Some compilers place space between "-{L,R}" and the path.
! 3798: # Remove the space.
! 3799: if test $p = "-L" \
! 3800: || test $p = "-R"; then
! 3801: prev=$p
! 3802: continue
! 3803: else
! 3804: prev=
! 3805: fi
! 3806:
! 3807: if test "$pre_test_object_deps_done" = no; then
! 3808: case $p in
! 3809: -L* | -R*)
! 3810: # Internal compiler library paths should come after those
! 3811: # provided the user. The postdeps already come after the
! 3812: # user supplied libs so there is no need to process them.
! 3813: if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
! 3814: _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
! 3815: else
! 3816: _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
! 3817: fi
! 3818: ;;
! 3819: # The "-l" case would never come before the object being
! 3820: # linked, so don't bother handling this case.
! 3821: esac
! 3822: else
! 3823: if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
! 3824: _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
! 3825: else
! 3826: _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
! 3827: fi
! 3828: fi
! 3829: ;;
! 3830:
! 3831: *.$objext)
! 3832: # This assumes that the test object file only shows up
! 3833: # once in the compiler output.
! 3834: if test "$p" = "conftest.$objext"; then
! 3835: pre_test_object_deps_done=yes
! 3836: continue
! 3837: fi
! 3838:
! 3839: if test "$pre_test_object_deps_done" = no; then
! 3840: if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
! 3841: _LT_AC_TAGVAR(predep_objects, $1)="$p"
! 3842: else
! 3843: _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
! 3844: fi
! 3845: else
! 3846: if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
! 3847: _LT_AC_TAGVAR(postdep_objects, $1)="$p"
! 3848: else
! 3849: _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
! 3850: fi
! 3851: fi
! 3852: ;;
! 3853:
! 3854: *) ;; # Ignore the rest.
! 3855:
! 3856: esac
! 3857: done
! 3858:
! 3859: # Clean up.
! 3860: rm -f a.out a.exe
! 3861: else
! 3862: echo "libtool.m4: error: problem compiling $1 test program"
! 3863: fi
! 3864:
! 3865: $rm -f confest.$objext
! 3866:
! 3867: # PORTME: override above test on systems where it is broken
! 3868: ifelse([$1],[CXX],
! 3869: [case $host_os in
! 3870: interix3*)
! 3871: # Interix 3.5 installs completely hosed .la files for C++, so rather than
! 3872: # hack all around it, let's just trust "g++" to DTRT.
! 3873: _LT_AC_TAGVAR(predep_objects,$1)=
! 3874: _LT_AC_TAGVAR(postdep_objects,$1)=
! 3875: _LT_AC_TAGVAR(postdeps,$1)=
! 3876: ;;
! 3877:
! 3878: solaris*)
! 3879: case $cc_basename in
! 3880: CC*)
! 3881: # Adding this requires a known-good setup of shared libraries for
! 3882: # Sun compiler versions before 5.6, else PIC objects from an old
! 3883: # archive will be linked into the output, leading to subtle bugs.
! 3884: _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
! 3885: ;;
! 3886: esac
! 3887: ;;
! 3888: esac
1.1 ohara 3889: ])
3890:
1.2 ! ohara 3891: case " $_LT_AC_TAGVAR(postdeps, $1) " in
! 3892: *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
! 3893: esac
! 3894: ])# AC_LIBTOOL_POSTDEP_PREDEP
! 3895:
! 3896: # AC_LIBTOOL_LANG_F77_CONFIG
! 3897: # --------------------------
! 3898: # Ensure that the configuration vars for the C compiler are
! 3899: # suitably defined. Those variables are subsequently used by
! 3900: # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
! 3901: AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
! 3902: AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
! 3903: [AC_REQUIRE([AC_PROG_F77])
! 3904: AC_LANG_PUSH(Fortran 77)
! 3905:
! 3906: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 3907: _LT_AC_TAGVAR(allow_undefined_flag, $1)=
! 3908: _LT_AC_TAGVAR(always_export_symbols, $1)=no
! 3909: _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
! 3910: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
! 3911: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 3912: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
! 3913: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
! 3914: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
! 3915: _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
! 3916: _LT_AC_TAGVAR(hardcode_automatic, $1)=no
! 3917: _LT_AC_TAGVAR(module_cmds, $1)=
! 3918: _LT_AC_TAGVAR(module_expsym_cmds, $1)=
! 3919: _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
! 3920: _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
! 3921: _LT_AC_TAGVAR(no_undefined_flag, $1)=
! 3922: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
! 3923: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
! 3924:
! 3925: # Source file extension for f77 test sources.
! 3926: ac_ext=f
! 3927:
! 3928: # Object file extension for compiled f77 test sources.
! 3929: objext=o
! 3930: _LT_AC_TAGVAR(objext, $1)=$objext
! 3931:
! 3932: # Code to be used in simple compile tests
! 3933: lt_simple_compile_test_code=" subroutine t\n return\n end\n"
! 3934:
! 3935: # Code to be used in simple link tests
! 3936: lt_simple_link_test_code=" program t\n end\n"
! 3937:
! 3938: # ltmain only uses $CC for tagged configurations so make sure $CC is set.
! 3939: _LT_AC_SYS_COMPILER
! 3940:
! 3941: # save warnings/boilerplate of simple test code
! 3942: _LT_COMPILER_BOILERPLATE
! 3943: _LT_LINKER_BOILERPLATE
! 3944:
! 3945: # Allow CC to be a program name with arguments.
! 3946: lt_save_CC="$CC"
! 3947: CC=${F77-"f77"}
! 3948: compiler=$CC
! 3949: _LT_AC_TAGVAR(compiler, $1)=$CC
! 3950: _LT_CC_BASENAME([$compiler])
! 3951:
! 3952: AC_MSG_CHECKING([if libtool supports shared libraries])
! 3953: AC_MSG_RESULT([$can_build_shared])
! 3954:
! 3955: AC_MSG_CHECKING([whether to build shared libraries])
! 3956: test "$can_build_shared" = "no" && enable_shared=no
! 3957:
! 3958: # On AIX, shared libraries and static libraries use the same namespace, and
! 3959: # are all built from PIC.
! 3960: case $host_os in
! 3961: aix3*)
! 3962: test "$enable_shared" = yes && enable_static=no
! 3963: if test -n "$RANLIB"; then
! 3964: archive_cmds="$archive_cmds~\$RANLIB \$lib"
! 3965: postinstall_cmds='$RANLIB $lib'
! 3966: fi
! 3967: ;;
! 3968: aix4* | aix5*)
! 3969: if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
! 3970: test "$enable_shared" = yes && enable_static=no
! 3971: fi
! 3972: ;;
! 3973: esac
! 3974: AC_MSG_RESULT([$enable_shared])
! 3975:
! 3976: AC_MSG_CHECKING([whether to build static libraries])
! 3977: # Make sure either enable_shared or enable_static is yes.
! 3978: test "$enable_shared" = yes || enable_static=yes
! 3979: AC_MSG_RESULT([$enable_static])
! 3980:
! 3981: _LT_AC_TAGVAR(GCC, $1)="$G77"
! 3982: _LT_AC_TAGVAR(LD, $1)="$LD"
! 3983:
! 3984: AC_LIBTOOL_PROG_COMPILER_PIC($1)
! 3985: AC_LIBTOOL_PROG_CC_C_O($1)
! 3986: AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
! 3987: AC_LIBTOOL_PROG_LD_SHLIBS($1)
! 3988: AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
! 3989: AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
! 3990:
! 3991: AC_LIBTOOL_CONFIG($1)
! 3992:
! 3993: AC_LANG_POP
! 3994: CC="$lt_save_CC"
! 3995: ])# AC_LIBTOOL_LANG_F77_CONFIG
! 3996:
! 3997:
! 3998: # AC_LIBTOOL_LANG_GCJ_CONFIG
! 3999: # --------------------------
! 4000: # Ensure that the configuration vars for the C compiler are
! 4001: # suitably defined. Those variables are subsequently used by
! 4002: # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
! 4003: AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
! 4004: AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
! 4005: [AC_LANG_SAVE
! 4006:
! 4007: # Source file extension for Java test sources.
! 4008: ac_ext=java
! 4009:
! 4010: # Object file extension for compiled Java test sources.
! 4011: objext=o
! 4012: _LT_AC_TAGVAR(objext, $1)=$objext
! 4013:
! 4014: # Code to be used in simple compile tests
! 4015: lt_simple_compile_test_code="class foo {}\n"
! 4016:
! 4017: # Code to be used in simple link tests
! 4018: lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
! 4019:
! 4020: # ltmain only uses $CC for tagged configurations so make sure $CC is set.
! 4021: _LT_AC_SYS_COMPILER
! 4022:
! 4023: # save warnings/boilerplate of simple test code
! 4024: _LT_COMPILER_BOILERPLATE
! 4025: _LT_LINKER_BOILERPLATE
! 4026:
! 4027: # Allow CC to be a program name with arguments.
! 4028: lt_save_CC="$CC"
! 4029: CC=${GCJ-"gcj"}
! 4030: compiler=$CC
! 4031: _LT_AC_TAGVAR(compiler, $1)=$CC
! 4032: _LT_CC_BASENAME([$compiler])
! 4033:
! 4034: # GCJ did not exist at the time GCC didn't implicitly link libc in.
! 4035: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 4036:
! 4037: _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
! 4038:
! 4039: AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
! 4040: AC_LIBTOOL_PROG_COMPILER_PIC($1)
! 4041: AC_LIBTOOL_PROG_CC_C_O($1)
! 4042: AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
! 4043: AC_LIBTOOL_PROG_LD_SHLIBS($1)
! 4044: AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
! 4045: AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
! 4046:
! 4047: AC_LIBTOOL_CONFIG($1)
! 4048:
! 4049: AC_LANG_RESTORE
! 4050: CC="$lt_save_CC"
! 4051: ])# AC_LIBTOOL_LANG_GCJ_CONFIG
! 4052:
! 4053:
! 4054: # AC_LIBTOOL_LANG_RC_CONFIG
! 4055: # -------------------------
! 4056: # Ensure that the configuration vars for the Windows resource compiler are
! 4057: # suitably defined. Those variables are subsequently used by
! 4058: # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
! 4059: AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
! 4060: AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
! 4061: [AC_LANG_SAVE
! 4062:
! 4063: # Source file extension for RC test sources.
! 4064: ac_ext=rc
! 4065:
! 4066: # Object file extension for compiled RC test sources.
! 4067: objext=o
! 4068: _LT_AC_TAGVAR(objext, $1)=$objext
! 4069:
! 4070: # Code to be used in simple compile tests
! 4071: lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
! 4072:
! 4073: # Code to be used in simple link tests
! 4074: lt_simple_link_test_code="$lt_simple_compile_test_code"
! 4075:
! 4076: # ltmain only uses $CC for tagged configurations so make sure $CC is set.
! 4077: _LT_AC_SYS_COMPILER
! 4078:
! 4079: # save warnings/boilerplate of simple test code
! 4080: _LT_COMPILER_BOILERPLATE
! 4081: _LT_LINKER_BOILERPLATE
! 4082:
! 4083: # Allow CC to be a program name with arguments.
! 4084: lt_save_CC="$CC"
! 4085: CC=${RC-"windres"}
! 4086: compiler=$CC
! 4087: _LT_AC_TAGVAR(compiler, $1)=$CC
! 4088: _LT_CC_BASENAME([$compiler])
! 4089: _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
! 4090:
! 4091: AC_LIBTOOL_CONFIG($1)
! 4092:
! 4093: AC_LANG_RESTORE
! 4094: CC="$lt_save_CC"
! 4095: ])# AC_LIBTOOL_LANG_RC_CONFIG
! 4096:
! 4097:
! 4098: # AC_LIBTOOL_CONFIG([TAGNAME])
! 4099: # ----------------------------
! 4100: # If TAGNAME is not passed, then create an initial libtool script
! 4101: # with a default configuration from the untagged config vars. Otherwise
! 4102: # add code to config.status for appending the configuration named by
! 4103: # TAGNAME from the matching tagged config vars.
! 4104: AC_DEFUN([AC_LIBTOOL_CONFIG],
! 4105: [# The else clause should only fire when bootstrapping the
! 4106: # libtool distribution, otherwise you forgot to ship ltmain.sh
! 4107: # with your package, and you will get complaints that there are
! 4108: # no rules to generate ltmain.sh.
! 4109: if test -f "$ltmain"; then
! 4110: # See if we are running on zsh, and set the options which allow our commands through
! 4111: # without removal of \ escapes.
! 4112: if test -n "${ZSH_VERSION+set}" ; then
! 4113: setopt NO_GLOB_SUBST
! 4114: fi
! 4115: # Now quote all the things that may contain metacharacters while being
! 4116: # careful not to overquote the AC_SUBSTed values. We take copies of the
! 4117: # variables and quote the copies for generation of the libtool script.
! 4118: for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
! 4119: SED SHELL STRIP \
! 4120: libname_spec library_names_spec soname_spec extract_expsyms_cmds \
! 4121: old_striplib striplib file_magic_cmd finish_cmds finish_eval \
! 4122: deplibs_check_method reload_flag reload_cmds need_locks \
! 4123: lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
! 4124: lt_cv_sys_global_symbol_to_c_name_address \
! 4125: sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
! 4126: old_postinstall_cmds old_postuninstall_cmds \
! 4127: _LT_AC_TAGVAR(compiler, $1) \
! 4128: _LT_AC_TAGVAR(CC, $1) \
! 4129: _LT_AC_TAGVAR(LD, $1) \
! 4130: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
! 4131: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
! 4132: _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
! 4133: _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
! 4134: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
! 4135: _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
! 4136: _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
! 4137: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
! 4138: _LT_AC_TAGVAR(old_archive_cmds, $1) \
! 4139: _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
! 4140: _LT_AC_TAGVAR(predep_objects, $1) \
! 4141: _LT_AC_TAGVAR(postdep_objects, $1) \
! 4142: _LT_AC_TAGVAR(predeps, $1) \
! 4143: _LT_AC_TAGVAR(postdeps, $1) \
! 4144: _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
! 4145: _LT_AC_TAGVAR(archive_cmds, $1) \
! 4146: _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
! 4147: _LT_AC_TAGVAR(postinstall_cmds, $1) \
! 4148: _LT_AC_TAGVAR(postuninstall_cmds, $1) \
! 4149: _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
! 4150: _LT_AC_TAGVAR(allow_undefined_flag, $1) \
! 4151: _LT_AC_TAGVAR(no_undefined_flag, $1) \
! 4152: _LT_AC_TAGVAR(export_symbols_cmds, $1) \
! 4153: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
! 4154: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
! 4155: _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
! 4156: _LT_AC_TAGVAR(hardcode_automatic, $1) \
! 4157: _LT_AC_TAGVAR(module_cmds, $1) \
! 4158: _LT_AC_TAGVAR(module_expsym_cmds, $1) \
! 4159: _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
! 4160: _LT_AC_TAGVAR(exclude_expsyms, $1) \
! 4161: _LT_AC_TAGVAR(include_expsyms, $1); do
! 4162:
! 4163: case $var in
! 4164: _LT_AC_TAGVAR(old_archive_cmds, $1) | \
! 4165: _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
! 4166: _LT_AC_TAGVAR(archive_cmds, $1) | \
! 4167: _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
! 4168: _LT_AC_TAGVAR(module_cmds, $1) | \
! 4169: _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
! 4170: _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
! 4171: _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
! 4172: extract_expsyms_cmds | reload_cmds | finish_cmds | \
! 4173: postinstall_cmds | postuninstall_cmds | \
! 4174: old_postinstall_cmds | old_postuninstall_cmds | \
! 4175: sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
! 4176: # Double-quote double-evaled strings.
! 4177: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
! 4178: ;;
! 4179: *)
! 4180: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
! 4181: ;;
! 4182: esac
! 4183: done
! 4184:
! 4185: case $lt_echo in
! 4186: *'\[$]0 --fallback-echo"')
! 4187: lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
! 4188: ;;
! 4189: esac
! 4190:
! 4191: ifelse([$1], [],
! 4192: [cfgfile="${ofile}T"
! 4193: trap "$rm \"$cfgfile\"; exit 1" 1 2 15
! 4194: $rm -f "$cfgfile"
! 4195: AC_MSG_NOTICE([creating $ofile])],
! 4196: [cfgfile="$ofile"])
! 4197:
! 4198: cat <<__EOF__ >> "$cfgfile"
! 4199: ifelse([$1], [],
! 4200: [#! $SHELL
! 4201:
! 4202: # `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
! 4203: # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
! 4204: # NOTE: Changes made to this file will be lost: look at ltmain.sh.
! 4205: #
! 4206: # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
! 4207: # Free Software Foundation, Inc.
! 4208: #
! 4209: # This file is part of GNU Libtool:
! 4210: # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
! 4211: #
! 4212: # This program is free software; you can redistribute it and/or modify
! 4213: # it under the terms of the GNU General Public License as published by
! 4214: # the Free Software Foundation; either version 2 of the License, or
! 4215: # (at your option) any later version.
! 4216: #
! 4217: # This program is distributed in the hope that it will be useful, but
! 4218: # WITHOUT ANY WARRANTY; without even the implied warranty of
! 4219: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
! 4220: # General Public License for more details.
! 4221: #
! 4222: # You should have received a copy of the GNU General Public License
! 4223: # along with this program; if not, write to the Free Software
! 4224: # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
! 4225: #
! 4226: # As a special exception to the GNU General Public License, if you
! 4227: # distribute this file as part of a program that contains a
! 4228: # configuration script generated by Autoconf, you may include it under
! 4229: # the same distribution terms that you use for the rest of that program.
! 4230:
! 4231: # A sed program that does not truncate output.
! 4232: SED=$lt_SED
! 4233:
! 4234: # Sed that helps us avoid accidentally triggering echo(1) options like -n.
! 4235: Xsed="$SED -e 1s/^X//"
! 4236:
! 4237: # The HP-UX ksh and POSIX shell print the target directory to stdout
! 4238: # if CDPATH is set.
! 4239: (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
! 4240:
! 4241: # The names of the tagged configurations supported by this script.
! 4242: available_tags=
! 4243:
! 4244: # ### BEGIN LIBTOOL CONFIG],
! 4245: [# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
! 4246:
! 4247: # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
! 4248:
! 4249: # Shell to use when invoking shell scripts.
! 4250: SHELL=$lt_SHELL
! 4251:
! 4252: # Whether or not to build shared libraries.
! 4253: build_libtool_libs=$enable_shared
! 4254:
! 4255: # Whether or not to build static libraries.
! 4256: build_old_libs=$enable_static
! 4257:
! 4258: # Whether or not to add -lc for building shared libraries.
! 4259: build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
! 4260:
! 4261: # Whether or not to disallow shared libs when runtime libs are static
! 4262: allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
! 4263:
! 4264: # Whether or not to optimize for fast installation.
! 4265: fast_install=$enable_fast_install
! 4266:
! 4267: # The host system.
! 4268: host_alias=$host_alias
! 4269: host=$host
! 4270: host_os=$host_os
! 4271:
! 4272: # The build system.
! 4273: build_alias=$build_alias
! 4274: build=$build
! 4275: build_os=$build_os
! 4276:
! 4277: # An echo program that does not interpret backslashes.
! 4278: echo=$lt_echo
! 4279:
! 4280: # The archiver.
! 4281: AR=$lt_AR
! 4282: AR_FLAGS=$lt_AR_FLAGS
! 4283:
! 4284: # A C compiler.
! 4285: LTCC=$lt_LTCC
! 4286:
! 4287: # LTCC compiler flags.
! 4288: LTCFLAGS=$lt_LTCFLAGS
! 4289:
! 4290: # A language-specific compiler.
! 4291: CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
! 4292:
! 4293: # Is the compiler the GNU C compiler?
! 4294: with_gcc=$_LT_AC_TAGVAR(GCC, $1)
! 4295:
! 4296: # An ERE matcher.
! 4297: EGREP=$lt_EGREP
! 4298:
! 4299: # The linker used to build libraries.
! 4300: LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
! 4301:
! 4302: # Whether we need hard or soft links.
! 4303: LN_S=$lt_LN_S
! 4304:
! 4305: # A BSD-compatible nm program.
! 4306: NM=$lt_NM
! 4307:
! 4308: # A symbol stripping program
! 4309: STRIP=$lt_STRIP
! 4310:
! 4311: # Used to examine libraries when file_magic_cmd begins "file"
! 4312: MAGIC_CMD=$MAGIC_CMD
! 4313:
! 4314: # Used on cygwin: DLL creation program.
! 4315: DLLTOOL="$DLLTOOL"
! 4316:
! 4317: # Used on cygwin: object dumper.
! 4318: OBJDUMP="$OBJDUMP"
! 4319:
! 4320: # Used on cygwin: assembler.
! 4321: AS="$AS"
! 4322:
! 4323: # The name of the directory that contains temporary libtool files.
! 4324: objdir=$objdir
! 4325:
! 4326: # How to create reloadable object files.
! 4327: reload_flag=$lt_reload_flag
! 4328: reload_cmds=$lt_reload_cmds
! 4329:
! 4330: # How to pass a linker flag through the compiler.
! 4331: wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
! 4332:
! 4333: # Object file suffix (normally "o").
! 4334: objext="$ac_objext"
! 4335:
! 4336: # Old archive suffix (normally "a").
! 4337: libext="$libext"
! 4338:
! 4339: # Shared library suffix (normally ".so").
! 4340: shrext_cmds='$shrext_cmds'
! 4341:
! 4342: # Executable file suffix (normally "").
! 4343: exeext="$exeext"
! 4344:
! 4345: # Additional compiler flags for building library objects.
! 4346: pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
! 4347: pic_mode=$pic_mode
! 4348:
! 4349: # What is the maximum length of a command?
! 4350: max_cmd_len=$lt_cv_sys_max_cmd_len
! 4351:
! 4352: # Does compiler simultaneously support -c and -o options?
! 4353: compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
! 4354:
! 4355: # Must we lock files when doing compilation?
! 4356: need_locks=$lt_need_locks
! 4357:
! 4358: # Do we need the lib prefix for modules?
! 4359: need_lib_prefix=$need_lib_prefix
! 4360:
! 4361: # Do we need a version for libraries?
! 4362: need_version=$need_version
! 4363:
! 4364: # Whether dlopen is supported.
! 4365: dlopen_support=$enable_dlopen
! 4366:
! 4367: # Whether dlopen of programs is supported.
! 4368: dlopen_self=$enable_dlopen_self
! 4369:
! 4370: # Whether dlopen of statically linked programs is supported.
! 4371: dlopen_self_static=$enable_dlopen_self_static
! 4372:
! 4373: # Compiler flag to prevent dynamic linking.
! 4374: link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
! 4375:
! 4376: # Compiler flag to turn off builtin functions.
! 4377: no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
! 4378:
! 4379: # Compiler flag to allow reflexive dlopens.
! 4380: export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
! 4381:
! 4382: # Compiler flag to generate shared objects directly from archives.
! 4383: whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
! 4384:
! 4385: # Compiler flag to generate thread-safe objects.
! 4386: thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
! 4387:
! 4388: # Library versioning type.
! 4389: version_type=$version_type
! 4390:
! 4391: # Format of library name prefix.
! 4392: libname_spec=$lt_libname_spec
! 4393:
! 4394: # List of archive names. First name is the real one, the rest are links.
! 4395: # The last name is the one that the linker finds with -lNAME.
! 4396: library_names_spec=$lt_library_names_spec
! 4397:
! 4398: # The coded name of the library, if different from the real name.
! 4399: soname_spec=$lt_soname_spec
! 4400:
! 4401: # Commands used to build and install an old-style archive.
! 4402: RANLIB=$lt_RANLIB
! 4403: old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
! 4404: old_postinstall_cmds=$lt_old_postinstall_cmds
! 4405: old_postuninstall_cmds=$lt_old_postuninstall_cmds
! 4406:
! 4407: # Create an old-style archive from a shared archive.
! 4408: old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
! 4409:
! 4410: # Create a temporary old-style archive to link instead of a shared archive.
! 4411: old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
! 4412:
! 4413: # Commands used to build and install a shared archive.
! 4414: archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
! 4415: archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
! 4416: postinstall_cmds=$lt_postinstall_cmds
! 4417: postuninstall_cmds=$lt_postuninstall_cmds
! 4418:
! 4419: # Commands used to build a loadable module (assumed same as above if empty)
! 4420: module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
! 4421: module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
! 4422:
! 4423: # Commands to strip libraries.
! 4424: old_striplib=$lt_old_striplib
! 4425: striplib=$lt_striplib
! 4426:
! 4427: # Dependencies to place before the objects being linked to create a
! 4428: # shared library.
! 4429: predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
! 4430:
! 4431: # Dependencies to place after the objects being linked to create a
! 4432: # shared library.
! 4433: postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
! 4434:
! 4435: # Dependencies to place before the objects being linked to create a
! 4436: # shared library.
! 4437: predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
! 4438:
! 4439: # Dependencies to place after the objects being linked to create a
! 4440: # shared library.
! 4441: postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
! 4442:
! 4443: # The library search path used internally by the compiler when linking
! 4444: # a shared library.
! 4445: compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
! 4446:
! 4447: # Method to check whether dependent libraries are shared objects.
! 4448: deplibs_check_method=$lt_deplibs_check_method
! 4449:
! 4450: # Command to use when deplibs_check_method == file_magic.
! 4451: file_magic_cmd=$lt_file_magic_cmd
! 4452:
! 4453: # Flag that allows shared libraries with undefined symbols to be built.
! 4454: allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
! 4455:
! 4456: # Flag that forces no undefined symbols.
! 4457: no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
! 4458:
! 4459: # Commands used to finish a libtool library installation in a directory.
! 4460: finish_cmds=$lt_finish_cmds
! 4461:
! 4462: # Same as above, but a single script fragment to be evaled but not shown.
! 4463: finish_eval=$lt_finish_eval
! 4464:
! 4465: # Take the output of nm and produce a listing of raw symbols and C names.
! 4466: global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
! 4467:
! 4468: # Transform the output of nm in a proper C declaration
! 4469: global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
! 4470:
! 4471: # Transform the output of nm in a C name address pair
! 4472: global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
! 4473:
! 4474: # This is the shared library runtime path variable.
! 4475: runpath_var=$runpath_var
! 4476:
! 4477: # This is the shared library path variable.
! 4478: shlibpath_var=$shlibpath_var
! 4479:
! 4480: # Is shlibpath searched before the hard-coded library search path?
! 4481: shlibpath_overrides_runpath=$shlibpath_overrides_runpath
! 4482:
! 4483: # How to hardcode a shared library path into an executable.
! 4484: hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
! 4485:
! 4486: # Whether we should hardcode library paths into libraries.
! 4487: hardcode_into_libs=$hardcode_into_libs
! 4488:
! 4489: # Flag to hardcode \$libdir into a binary during linking.
! 4490: # This must work even if \$libdir does not exist.
! 4491: hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
! 4492:
! 4493: # If ld is used when linking, flag to hardcode \$libdir into
! 4494: # a binary during linking. This must work even if \$libdir does
! 4495: # not exist.
! 4496: hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
! 4497:
! 4498: # Whether we need a single -rpath flag with a separated argument.
! 4499: hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
! 4500:
! 4501: # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
! 4502: # resulting binary.
! 4503: hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
! 4504:
! 4505: # Set to yes if using the -LDIR flag during linking hardcodes DIR into the
! 4506: # resulting binary.
! 4507: hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
! 4508:
! 4509: # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
! 4510: # the resulting binary.
! 4511: hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
! 4512:
! 4513: # Set to yes if building a shared library automatically hardcodes DIR into the library
! 4514: # and all subsequent libraries and executables linked against it.
! 4515: hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
! 4516:
! 4517: # Variables whose values should be saved in libtool wrapper scripts and
! 4518: # restored at relink time.
! 4519: variables_saved_for_relink="$variables_saved_for_relink"
! 4520:
! 4521: # Whether libtool must link a program against all its dependency libraries.
! 4522: link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
! 4523:
! 4524: # Compile-time system search path for libraries
! 4525: sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
! 4526:
! 4527: # Run-time system search path for libraries
! 4528: sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
! 4529:
! 4530: # Fix the shell variable \$srcfile for the compiler.
! 4531: fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
! 4532:
! 4533: # Set to yes if exported symbols are required.
! 4534: always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
! 4535:
! 4536: # The commands to list exported symbols.
! 4537: export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
! 4538:
! 4539: # The commands to extract the exported symbol list from a shared archive.
! 4540: extract_expsyms_cmds=$lt_extract_expsyms_cmds
! 4541:
! 4542: # Symbols that should not be listed in the preloaded symbols.
! 4543: exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
! 4544:
! 4545: # Symbols that must always be exported.
! 4546: include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
! 4547:
! 4548: ifelse([$1],[],
! 4549: [# ### END LIBTOOL CONFIG],
! 4550: [# ### END LIBTOOL TAG CONFIG: $tagname])
! 4551:
! 4552: __EOF__
! 4553:
! 4554: ifelse([$1],[], [
! 4555: case $host_os in
! 4556: aix3*)
! 4557: cat <<\EOF >> "$cfgfile"
! 4558:
! 4559: # AIX sometimes has problems with the GCC collect2 program. For some
! 4560: # reason, if we set the COLLECT_NAMES environment variable, the problems
! 4561: # vanish in a puff of smoke.
! 4562: if test "X${COLLECT_NAMES+set}" != Xset; then
! 4563: COLLECT_NAMES=
! 4564: export COLLECT_NAMES
! 4565: fi
! 4566: EOF
! 4567: ;;
! 4568: esac
! 4569:
! 4570: # We use sed instead of cat because bash on DJGPP gets confused if
! 4571: # if finds mixed CR/LF and LF-only lines. Since sed operates in
! 4572: # text mode, it properly converts lines to CR/LF. This bash problem
! 4573: # is reportedly fixed, but why not run on old versions too?
! 4574: sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
! 4575:
! 4576: mv -f "$cfgfile" "$ofile" || \
! 4577: (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
! 4578: chmod +x "$ofile"
! 4579: ])
! 4580: else
! 4581: # If there is no Makefile yet, we rely on a make rule to execute
! 4582: # `config.status --recheck' to rerun these tests and create the
! 4583: # libtool script then.
! 4584: ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
! 4585: if test -f "$ltmain_in"; then
! 4586: test -f Makefile && make "$ltmain"
! 4587: fi
! 4588: fi
! 4589: ])# AC_LIBTOOL_CONFIG
! 4590:
! 4591:
! 4592: # AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
! 4593: # -------------------------------------------
! 4594: AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
! 4595: [AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
! 4596:
! 4597: _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
! 4598:
! 4599: if test "$GCC" = yes; then
! 4600: _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
! 4601:
! 4602: AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
! 4603: lt_cv_prog_compiler_rtti_exceptions,
! 4604: [-fno-rtti -fno-exceptions], [],
! 4605: [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
! 4606: fi
! 4607: ])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
! 4608:
! 4609:
! 4610: # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
! 4611: # ---------------------------------
! 4612: AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
! 4613: [AC_REQUIRE([AC_CANONICAL_HOST])
! 4614: AC_REQUIRE([AC_PROG_NM])
! 4615: AC_REQUIRE([AC_OBJEXT])
! 4616: # Check for command to grab the raw symbol name followed by C symbol from nm.
! 4617: AC_MSG_CHECKING([command to parse $NM output from $compiler object])
! 4618: AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
! 4619: [
! 4620: # These are sane defaults that work on at least a few old systems.
! 4621: # [They come from Ultrix. What could be older than Ultrix?!! ;)]
! 4622:
! 4623: # Character class describing NM global symbol codes.
! 4624: symcode='[[BCDEGRST]]'
! 4625:
! 4626: # Regexp to match symbols that can be accessed directly from C.
! 4627: sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
! 4628:
! 4629: # Transform an extracted symbol line into a proper C declaration
! 4630: lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
! 4631:
! 4632: # Transform an extracted symbol line into symbol name and symbol address
! 4633: lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
! 4634:
! 4635: # Define system-specific variables.
! 4636: case $host_os in
! 4637: aix*)
! 4638: symcode='[[BCDT]]'
! 4639: ;;
! 4640: cygwin* | mingw* | pw32*)
! 4641: symcode='[[ABCDGISTW]]'
! 4642: ;;
! 4643: hpux*) # Its linker distinguishes data from code symbols
! 4644: if test "$host_cpu" = ia64; then
! 4645: symcode='[[ABCDEGRST]]'
! 4646: fi
! 4647: lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
! 4648: lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
! 4649: ;;
! 4650: linux*)
! 4651: if test "$host_cpu" = ia64; then
! 4652: symcode='[[ABCDGIRSTW]]'
! 4653: lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
! 4654: lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
! 4655: fi
! 4656: ;;
! 4657: irix* | nonstopux*)
! 4658: symcode='[[BCDEGRST]]'
! 4659: ;;
! 4660: osf*)
! 4661: symcode='[[BCDEGQRST]]'
! 4662: ;;
! 4663: solaris*)
! 4664: symcode='[[BDRT]]'
! 4665: ;;
! 4666: sco3.2v5*)
! 4667: symcode='[[DT]]'
! 4668: ;;
! 4669: sysv4.2uw2*)
! 4670: symcode='[[DT]]'
! 4671: ;;
! 4672: sysv5* | sco5v6* | unixware* | OpenUNIX*)
! 4673: symcode='[[ABDT]]'
! 4674: ;;
! 4675: sysv4)
! 4676: symcode='[[DFNSTU]]'
! 4677: ;;
! 4678: esac
! 4679:
! 4680: # Handle CRLF in mingw tool chain
! 4681: opt_cr=
! 4682: case $build_os in
! 4683: mingw*)
! 4684: opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
! 4685: ;;
! 4686: esac
! 4687:
! 4688: # If we're using GNU nm, then use its standard symbol codes.
! 4689: case `$NM -V 2>&1` in
! 4690: *GNU* | *'with BFD'*)
! 4691: symcode='[[ABCDGIRSTW]]' ;;
! 4692: esac
! 4693:
! 4694: # Try without a prefix undercore, then with it.
! 4695: for ac_symprfx in "" "_"; do
! 4696:
! 4697: # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
! 4698: symxfrm="\\1 $ac_symprfx\\2 \\2"
! 4699:
! 4700: # Write the raw and C identifiers.
! 4701: lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
! 4702:
! 4703: # Check to see that the pipe works correctly.
! 4704: pipe_works=no
! 4705:
! 4706: rm -f conftest*
! 4707: cat > conftest.$ac_ext <<EOF
! 4708: #ifdef __cplusplus
! 4709: extern "C" {
! 4710: #endif
! 4711: char nm_test_var;
! 4712: void nm_test_func(){}
! 4713: #ifdef __cplusplus
! 4714: }
! 4715: #endif
! 4716: int main(){nm_test_var='a';nm_test_func();return(0);}
! 4717: EOF
! 4718:
! 4719: if AC_TRY_EVAL(ac_compile); then
! 4720: # Now try to grab the symbols.
! 4721: nlist=conftest.nm
! 4722: if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
! 4723: # Try sorting and uniquifying the output.
! 4724: if sort "$nlist" | uniq > "$nlist"T; then
! 4725: mv -f "$nlist"T "$nlist"
! 4726: else
! 4727: rm -f "$nlist"T
! 4728: fi
! 4729:
! 4730: # Make sure that we snagged all the symbols we need.
! 4731: if grep ' nm_test_var$' "$nlist" >/dev/null; then
! 4732: if grep ' nm_test_func$' "$nlist" >/dev/null; then
! 4733: cat <<EOF > conftest.$ac_ext
! 4734: #ifdef __cplusplus
! 4735: extern "C" {
! 4736: #endif
! 4737:
! 4738: EOF
! 4739: # Now generate the symbol file.
! 4740: eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
! 4741:
! 4742: cat <<EOF >> conftest.$ac_ext
! 4743: #if defined (__STDC__) && __STDC__
! 4744: # define lt_ptr_t void *
! 4745: #else
! 4746: # define lt_ptr_t char *
! 4747: # define const
! 4748: #endif
! 4749:
! 4750: /* The mapping between symbol names and symbols. */
! 4751: const struct {
! 4752: const char *name;
! 4753: lt_ptr_t address;
! 4754: }
! 4755: lt_preloaded_symbols[[]] =
! 4756: {
! 4757: EOF
! 4758: $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
! 4759: cat <<\EOF >> conftest.$ac_ext
! 4760: {0, (lt_ptr_t) 0}
! 4761: };
! 4762:
! 4763: #ifdef __cplusplus
! 4764: }
! 4765: #endif
! 4766: EOF
! 4767: # Now try linking the two files.
! 4768: mv conftest.$ac_objext conftstm.$ac_objext
! 4769: lt_save_LIBS="$LIBS"
! 4770: lt_save_CFLAGS="$CFLAGS"
! 4771: LIBS="conftstm.$ac_objext"
! 4772: CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
! 4773: if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
! 4774: pipe_works=yes
! 4775: fi
! 4776: LIBS="$lt_save_LIBS"
! 4777: CFLAGS="$lt_save_CFLAGS"
! 4778: else
! 4779: echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
! 4780: fi
! 4781: else
! 4782: echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
! 4783: fi
! 4784: else
! 4785: echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
! 4786: fi
! 4787: else
! 4788: echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
! 4789: cat conftest.$ac_ext >&5
! 4790: fi
! 4791: rm -f conftest* conftst*
! 4792:
! 4793: # Do not use the global_symbol_pipe unless it works.
! 4794: if test "$pipe_works" = yes; then
! 4795: break
! 4796: else
! 4797: lt_cv_sys_global_symbol_pipe=
! 4798: fi
! 4799: done
! 4800: ])
! 4801: if test -z "$lt_cv_sys_global_symbol_pipe"; then
! 4802: lt_cv_sys_global_symbol_to_cdecl=
! 4803: fi
! 4804: if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
! 4805: AC_MSG_RESULT(failed)
! 4806: else
! 4807: AC_MSG_RESULT(ok)
! 4808: fi
! 4809: ]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
! 4810:
! 4811:
! 4812: # AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
! 4813: # ---------------------------------------
! 4814: AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
! 4815: [_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
! 4816: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
! 4817: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
! 4818:
! 4819: AC_MSG_CHECKING([for $compiler option to produce PIC])
! 4820: ifelse([$1],[CXX],[
! 4821: # C++ specific cases for pic, static, wl, etc.
! 4822: if test "$GXX" = yes; then
! 4823: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4824: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
! 4825:
! 4826: case $host_os in
! 4827: aix*)
! 4828: # All AIX code is PIC.
! 4829: if test "$host_cpu" = ia64; then
! 4830: # AIX 5 now supports IA64 processor
! 4831: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 4832: fi
! 4833: ;;
! 4834: amigaos*)
! 4835: # FIXME: we need at least 68020 code to build shared libraries, but
! 4836: # adding the `-m68020' flag to GCC prevents building anything better,
! 4837: # like `-m68040'.
! 4838: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
! 4839: ;;
! 4840: beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
! 4841: # PIC is the default for these OSes.
! 4842: ;;
! 4843: mingw* | os2* | pw32*)
! 4844: # This hack is so that the source file can tell whether it is being
! 4845: # built for inclusion in a dll (and should export symbols for example).
! 4846: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
! 4847: ;;
! 4848: darwin* | rhapsody*)
! 4849: # PIC is the default on this platform
! 4850: # Common symbols not allowed in MH_DYLIB files
! 4851: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
! 4852: ;;
! 4853: *djgpp*)
! 4854: # DJGPP does not support shared libraries at all
! 4855: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
! 4856: ;;
! 4857: interix3*)
! 4858: # Interix 3.x gcc -fpic/-fPIC options generate broken code.
! 4859: # Instead, we relocate shared libraries at runtime.
! 4860: ;;
! 4861: sysv4*MP*)
! 4862: if test -d /usr/nec; then
! 4863: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
! 4864: fi
! 4865: ;;
! 4866: hpux*)
! 4867: # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
! 4868: # not for PA HP-UX.
! 4869: case $host_cpu in
! 4870: hppa*64*|ia64*)
! 4871: ;;
! 4872: *)
! 4873: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
! 4874: ;;
! 4875: esac
! 4876: ;;
! 4877: *)
! 4878: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
! 4879: ;;
! 4880: esac
! 4881: else
! 4882: case $host_os in
! 4883: aix4* | aix5*)
! 4884: # All AIX code is PIC.
! 4885: if test "$host_cpu" = ia64; then
! 4886: # AIX 5 now supports IA64 processor
! 4887: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 4888: else
! 4889: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
! 4890: fi
! 4891: ;;
! 4892: chorus*)
! 4893: case $cc_basename in
! 4894: cxch68*)
! 4895: # Green Hills C++ Compiler
! 4896: # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
! 4897: ;;
! 4898: esac
! 4899: ;;
! 4900: darwin*)
! 4901: # PIC is the default on this platform
! 4902: # Common symbols not allowed in MH_DYLIB files
! 4903: case $cc_basename in
! 4904: xlc*)
! 4905: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
! 4906: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4907: ;;
! 4908: esac
! 4909: ;;
! 4910: dgux*)
! 4911: case $cc_basename in
! 4912: ec++*)
! 4913: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 4914: ;;
! 4915: ghcx*)
! 4916: # Green Hills C++ Compiler
! 4917: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
! 4918: ;;
! 4919: *)
! 4920: ;;
! 4921: esac
! 4922: ;;
! 4923: freebsd* | kfreebsd*-gnu | dragonfly*)
! 4924: # FreeBSD uses GNU C++
! 4925: ;;
! 4926: hpux9* | hpux10* | hpux11*)
! 4927: case $cc_basename in
! 4928: CC*)
! 4929: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4930: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
! 4931: if test "$host_cpu" != ia64; then
! 4932: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
! 4933: fi
! 4934: ;;
! 4935: aCC*)
! 4936: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4937: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
! 4938: case $host_cpu in
! 4939: hppa*64*|ia64*)
! 4940: # +Z the default
! 4941: ;;
! 4942: *)
! 4943: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
! 4944: ;;
! 4945: esac
! 4946: ;;
! 4947: *)
! 4948: ;;
! 4949: esac
! 4950: ;;
! 4951: interix*)
! 4952: # This is c89, which is MS Visual C++ (no shared libs)
! 4953: # Anyone wants to do a port?
! 4954: ;;
! 4955: irix5* | irix6* | nonstopux*)
! 4956: case $cc_basename in
! 4957: CC*)
! 4958: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4959: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
! 4960: # CC pic flag -KPIC is the default.
! 4961: ;;
! 4962: *)
! 4963: ;;
! 4964: esac
! 4965: ;;
! 4966: linux*)
! 4967: case $cc_basename in
! 4968: KCC*)
! 4969: # KAI C++ Compiler
! 4970: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
! 4971: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
! 4972: ;;
! 4973: icpc* | ecpc*)
! 4974: # Intel C++
! 4975: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4976: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 4977: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
! 4978: ;;
! 4979: pgCC*)
! 4980: # Portland Group C++ compiler.
! 4981: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 4982: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
! 4983: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 4984: ;;
! 4985: cxx*)
! 4986: # Compaq C++
! 4987: # Make sure the PIC flag is empty. It appears that all Alpha
! 4988: # Linux and Compaq Tru64 Unix objects are PIC.
! 4989: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
! 4990: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
! 4991: ;;
! 4992: *)
! 4993: ;;
! 4994: esac
! 4995: ;;
! 4996: lynxos*)
! 4997: ;;
! 4998: m88k*)
! 4999: ;;
! 5000: mvs*)
! 5001: case $cc_basename in
! 5002: cxx*)
! 5003: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
! 5004: ;;
! 5005: *)
! 5006: ;;
! 5007: esac
! 5008: ;;
! 5009: netbsd*)
! 5010: ;;
! 5011: osf3* | osf4* | osf5*)
! 5012: case $cc_basename in
! 5013: KCC*)
! 5014: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
! 5015: ;;
! 5016: RCC*)
! 5017: # Rational C++ 2.4.1
! 5018: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
! 5019: ;;
! 5020: cxx*)
! 5021: # Digital/Compaq C++
! 5022: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5023: # Make sure the PIC flag is empty. It appears that all Alpha
! 5024: # Linux and Compaq Tru64 Unix objects are PIC.
! 5025: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
! 5026: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
! 5027: ;;
! 5028: *)
! 5029: ;;
! 5030: esac
! 5031: ;;
! 5032: psos*)
! 5033: ;;
! 5034: solaris*)
! 5035: case $cc_basename in
! 5036: CC*)
! 5037: # Sun C++ 4.2, 5.x and Centerline C++
! 5038: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5039: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5040: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
! 5041: ;;
! 5042: gcx*)
! 5043: # Green Hills C++ Compiler
! 5044: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
! 5045: ;;
! 5046: *)
! 5047: ;;
! 5048: esac
! 5049: ;;
! 5050: sunos4*)
! 5051: case $cc_basename in
! 5052: CC*)
! 5053: # Sun C++ 4.x
! 5054: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
! 5055: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5056: ;;
! 5057: lcc*)
! 5058: # Lucid
! 5059: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
! 5060: ;;
! 5061: *)
! 5062: ;;
! 5063: esac
! 5064: ;;
! 5065: tandem*)
! 5066: case $cc_basename in
! 5067: NCC*)
! 5068: # NonStop-UX NCC 3.20
! 5069: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5070: ;;
! 5071: *)
! 5072: ;;
! 5073: esac
! 5074: ;;
! 5075: sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
! 5076: case $cc_basename in
! 5077: CC*)
! 5078: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5079: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5080: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5081: ;;
! 5082: esac
! 5083: ;;
! 5084: vxworks*)
! 5085: ;;
! 5086: *)
! 5087: _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
! 5088: ;;
! 5089: esac
! 5090: fi
! 5091: ],
! 5092: [
! 5093: if test "$GCC" = yes; then
! 5094: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5095: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
! 5096:
! 5097: case $host_os in
! 5098: aix*)
! 5099: # All AIX code is PIC.
! 5100: if test "$host_cpu" = ia64; then
! 5101: # AIX 5 now supports IA64 processor
! 5102: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5103: fi
! 5104: ;;
! 5105:
! 5106: amigaos*)
! 5107: # FIXME: we need at least 68020 code to build shared libraries, but
! 5108: # adding the `-m68020' flag to GCC prevents building anything better,
! 5109: # like `-m68040'.
! 5110: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
! 5111: ;;
! 5112:
! 5113: beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
! 5114: # PIC is the default for these OSes.
! 5115: ;;
! 5116:
! 5117: mingw* | pw32* | os2*)
! 5118: # This hack is so that the source file can tell whether it is being
! 5119: # built for inclusion in a dll (and should export symbols for example).
! 5120: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
! 5121: ;;
! 5122:
! 5123: darwin* | rhapsody*)
! 5124: # PIC is the default on this platform
! 5125: # Common symbols not allowed in MH_DYLIB files
! 5126: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
! 5127: ;;
! 5128:
! 5129: interix3*)
! 5130: # Interix 3.x gcc -fpic/-fPIC options generate broken code.
! 5131: # Instead, we relocate shared libraries at runtime.
! 5132: ;;
! 5133:
! 5134: msdosdjgpp*)
! 5135: # Just because we use GCC doesn't mean we suddenly get shared libraries
! 5136: # on systems that don't support them.
! 5137: _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
! 5138: enable_shared=no
! 5139: ;;
! 5140:
! 5141: sysv4*MP*)
! 5142: if test -d /usr/nec; then
! 5143: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
! 5144: fi
! 5145: ;;
! 5146:
! 5147: hpux*)
! 5148: # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
! 5149: # not for PA HP-UX.
! 5150: case $host_cpu in
! 5151: hppa*64*|ia64*)
! 5152: # +Z the default
! 5153: ;;
! 5154: *)
! 5155: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
! 5156: ;;
! 5157: esac
! 5158: ;;
! 5159:
! 5160: *)
! 5161: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
! 5162: ;;
! 5163: esac
! 5164: else
! 5165: # PORTME Check for flag to pass linker flags through the system compiler.
! 5166: case $host_os in
! 5167: aix*)
! 5168: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5169: if test "$host_cpu" = ia64; then
! 5170: # AIX 5 now supports IA64 processor
! 5171: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5172: else
! 5173: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
! 5174: fi
! 5175: ;;
! 5176: darwin*)
! 5177: # PIC is the default on this platform
! 5178: # Common symbols not allowed in MH_DYLIB files
! 5179: case $cc_basename in
! 5180: xlc*)
! 5181: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
! 5182: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5183: ;;
! 5184: esac
! 5185: ;;
! 5186:
! 5187: mingw* | pw32* | os2*)
! 5188: # This hack is so that the source file can tell whether it is being
! 5189: # built for inclusion in a dll (and should export symbols for example).
! 5190: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
! 5191: ;;
! 5192:
! 5193: hpux9* | hpux10* | hpux11*)
! 5194: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5195: # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
! 5196: # not for PA HP-UX.
! 5197: case $host_cpu in
! 5198: hppa*64*|ia64*)
! 5199: # +Z the default
! 5200: ;;
! 5201: *)
! 5202: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
! 5203: ;;
! 5204: esac
! 5205: # Is there a better lt_prog_compiler_static that works with the bundled CC?
! 5206: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
! 5207: ;;
! 5208:
! 5209: irix5* | irix6* | nonstopux*)
! 5210: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5211: # PIC (with -KPIC) is the default.
! 5212: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
! 5213: ;;
! 5214:
! 5215: newsos6)
! 5216: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5217: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5218: ;;
! 5219:
! 5220: linux*)
! 5221: case $cc_basename in
! 5222: icc* | ecc*)
! 5223: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5224: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5225: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
! 5226: ;;
! 5227: pgcc* | pgf77* | pgf90* | pgf95*)
! 5228: # Portland Group compilers (*not* the Pentium gcc compiler,
! 5229: # which looks to be a dead project)
! 5230: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5231: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
! 5232: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5233: ;;
! 5234: ccc*)
! 5235: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5236: # All Alpha code is PIC.
! 5237: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
! 5238: ;;
! 5239: esac
! 5240: ;;
! 5241:
! 5242: osf3* | osf4* | osf5*)
! 5243: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5244: # All OSF/1 code is PIC.
! 5245: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
! 5246: ;;
! 5247:
! 5248: solaris*)
! 5249: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5250: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5251: case $cc_basename in
! 5252: f77* | f90* | f95*)
! 5253: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
! 5254: *)
! 5255: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
! 5256: esac
! 5257: ;;
! 5258:
! 5259: sunos4*)
! 5260: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
! 5261: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
! 5262: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5263: ;;
! 5264:
! 5265: sysv4 | sysv4.2uw2* | sysv4.3*)
! 5266: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5267: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5268: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5269: ;;
! 5270:
! 5271: sysv4*MP*)
! 5272: if test -d /usr/nec ;then
! 5273: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
! 5274: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5275: fi
! 5276: ;;
! 5277:
! 5278: sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
! 5279: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5280: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
! 5281: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5282: ;;
! 5283:
! 5284: unicos*)
! 5285: _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
! 5286: _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
! 5287: ;;
! 5288:
! 5289: uts4*)
! 5290: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
! 5291: _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
! 5292: ;;
! 5293:
! 5294: *)
! 5295: _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
! 5296: ;;
! 5297: esac
! 5298: fi
! 5299: ])
! 5300: AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
! 5301:
! 5302: #
! 5303: # Check to make sure the PIC flag actually works.
! 5304: #
! 5305: if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
! 5306: AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
! 5307: _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
! 5308: [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
! 5309: [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
! 5310: "" | " "*) ;;
! 5311: *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
! 5312: esac],
! 5313: [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
! 5314: _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
! 5315: fi
! 5316: case $host_os in
! 5317: # For platforms which do not support PIC, -DPIC is meaningless:
! 5318: *djgpp*)
! 5319: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
! 5320: ;;
! 5321: *)
! 5322: _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
! 5323: ;;
! 5324: esac
! 5325:
! 5326: #
! 5327: # Check to make sure the static flag actually works.
! 5328: #
! 5329: wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
! 5330: AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
! 5331: _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
! 5332: $lt_tmp_static_flag,
! 5333: [],
! 5334: [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
! 5335: ])
! 5336:
! 5337:
! 5338: # AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
! 5339: # ------------------------------------
! 5340: # See if the linker supports building shared libraries.
! 5341: AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
! 5342: [AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
! 5343: ifelse([$1],[CXX],[
! 5344: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
! 5345: case $host_os in
! 5346: aix4* | aix5*)
! 5347: # If we're using GNU nm, then we don't want the "-C" option.
! 5348: # -C means demangle to AIX nm, but means don't demangle with GNU nm
! 5349: if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
! 5350: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
! 5351: else
! 5352: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
! 5353: fi
! 5354: ;;
! 5355: pw32*)
! 5356: _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
! 5357: ;;
! 5358: cygwin* | mingw*)
! 5359: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
! 5360: ;;
! 5361: *)
! 5362: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
! 5363: ;;
! 5364: esac
! 5365: ],[
! 5366: runpath_var=
! 5367: _LT_AC_TAGVAR(allow_undefined_flag, $1)=
! 5368: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
! 5369: _LT_AC_TAGVAR(archive_cmds, $1)=
! 5370: _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
! 5371: _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
! 5372: _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
! 5373: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
! 5374: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
! 5375: _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
! 5376: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
! 5377: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
! 5378: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
! 5379: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 5380: _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
! 5381: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
! 5382: _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
! 5383: _LT_AC_TAGVAR(hardcode_automatic, $1)=no
! 5384: _LT_AC_TAGVAR(module_cmds, $1)=
! 5385: _LT_AC_TAGVAR(module_expsym_cmds, $1)=
! 5386: _LT_AC_TAGVAR(always_export_symbols, $1)=no
! 5387: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
! 5388: # include_expsyms should be a list of space-separated symbols to be *always*
! 5389: # included in the symbol list
! 5390: _LT_AC_TAGVAR(include_expsyms, $1)=
! 5391: # exclude_expsyms can be an extended regexp of symbols to exclude
! 5392: # it will be wrapped by ` (' and `)$', so one must not match beginning or
! 5393: # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
! 5394: # as well as any symbol that contains `d'.
! 5395: _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
! 5396: # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
! 5397: # platforms (ab)use it in PIC code, but their linkers get confused if
! 5398: # the symbol is explicitly referenced. Since portable code cannot
! 5399: # rely on this symbol name, it's probably fine to never include it in
! 5400: # preloaded symbol tables.
! 5401: extract_expsyms_cmds=
! 5402: # Just being paranoid about ensuring that cc_basename is set.
! 5403: _LT_CC_BASENAME([$compiler])
! 5404: case $host_os in
! 5405: cygwin* | mingw* | pw32*)
! 5406: # FIXME: the MSVC++ port hasn't been tested in a loooong time
! 5407: # When not using gcc, we currently assume that we are using
! 5408: # Microsoft Visual C++.
! 5409: if test "$GCC" != yes; then
! 5410: with_gnu_ld=no
! 5411: fi
! 5412: ;;
! 5413: interix*)
! 5414: # we just hope/assume this is gcc and not c89 (= MSVC++)
! 5415: with_gnu_ld=yes
! 5416: ;;
! 5417: openbsd*)
! 5418: with_gnu_ld=no
! 5419: ;;
! 5420: esac
! 5421:
! 5422: _LT_AC_TAGVAR(ld_shlibs, $1)=yes
! 5423: if test "$with_gnu_ld" = yes; then
! 5424: # If archive_cmds runs LD, not CC, wlarc should be empty
! 5425: wlarc='${wl}'
! 5426:
! 5427: # Set some defaults for GNU ld with shared library support. These
! 5428: # are reset later if shared libraries are not supported. Putting them
! 5429: # here allows them to be overridden if necessary.
! 5430: runpath_var=LD_RUN_PATH
! 5431: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
! 5432: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
! 5433: # ancient GNU ld didn't support --whole-archive et. al.
! 5434: if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
! 5435: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
! 5436: else
! 5437: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
! 5438: fi
! 5439: supports_anon_versioning=no
! 5440: case `$LD -v 2>/dev/null` in
! 5441: *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
! 5442: *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
! 5443: *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
! 5444: *\ 2.11.*) ;; # other 2.11 versions
! 5445: *) supports_anon_versioning=yes ;;
! 5446: esac
! 5447:
! 5448: # See if GNU ld supports shared libraries.
! 5449: case $host_os in
! 5450: aix3* | aix4* | aix5*)
! 5451: # On AIX/PPC, the GNU linker is very broken
! 5452: if test "$host_cpu" != ia64; then
! 5453: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5454: cat <<EOF 1>&2
! 5455:
! 5456: *** Warning: the GNU linker, at least up to release 2.9.1, is reported
! 5457: *** to be unable to reliably create shared libraries on AIX.
! 5458: *** Therefore, libtool is disabling shared libraries support. If you
! 5459: *** really care for shared libraries, you may want to modify your PATH
! 5460: *** so that a non-GNU linker is found, and then restart.
! 5461:
! 5462: EOF
! 5463: fi
! 5464: ;;
! 5465:
! 5466: amigaos*)
! 5467: _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
! 5468: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 5469: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5470:
! 5471: # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
! 5472: # that the semantics of dynamic libraries on AmigaOS, at least up
! 5473: # to version 4, is to share data among multiple programs linked
! 5474: # with the same dynamic library. Since this doesn't match the
! 5475: # behavior of shared libraries on other platforms, we can't use
! 5476: # them.
! 5477: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5478: ;;
! 5479:
! 5480: beos*)
! 5481: if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
! 5482: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 5483: # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
! 5484: # support --undefined. This deserves some investigation. FIXME
! 5485: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 5486: else
! 5487: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5488: fi
! 5489: ;;
! 5490:
! 5491: cygwin* | mingw* | pw32*)
! 5492: # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
! 5493: # as there is no search path for DLLs.
! 5494: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 5495: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 5496: _LT_AC_TAGVAR(always_export_symbols, $1)=no
! 5497: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
! 5498: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
! 5499:
! 5500: if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
! 5501: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
! 5502: # If the export-symbols file already is a .def file (1st line
! 5503: # is EXPORTS), use it as is; otherwise, prepend...
! 5504: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
! 5505: cp $export_symbols $output_objdir/$soname.def;
! 5506: else
! 5507: echo EXPORTS > $output_objdir/$soname.def;
! 5508: cat $export_symbols >> $output_objdir/$soname.def;
! 5509: fi~
! 5510: $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
! 5511: else
! 5512: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5513: fi
! 5514: ;;
! 5515:
! 5516: interix3*)
! 5517: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 5518: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5519: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 5520: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 5521: # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
! 5522: # Instead, shared libraries are loaded at an image base (0x10000000 by
! 5523: # default) and relocated if they conflict, which is a slow very memory
! 5524: # consuming and fragmenting process. To avoid this, we pick a random,
! 5525: # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
! 5526: # time. Moving up from 0x10000000 also allows more sbrk(2) space.
! 5527: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
! 5528: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
! 5529: ;;
! 5530:
! 5531: linux*)
! 5532: if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
! 5533: tmp_addflag=
! 5534: case $cc_basename,$host_cpu in
! 5535: pgcc*) # Portland Group C compiler
! 5536: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
! 5537: tmp_addflag=' $pic_flag'
! 5538: ;;
! 5539: pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
! 5540: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
! 5541: tmp_addflag=' $pic_flag -Mnomain' ;;
! 5542: ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
! 5543: tmp_addflag=' -i_dynamic' ;;
! 5544: efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
! 5545: tmp_addflag=' -i_dynamic -nofor_main' ;;
! 5546: ifc* | ifort*) # Intel Fortran compiler
! 5547: tmp_addflag=' -nofor_main' ;;
! 5548: esac
! 5549: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 5550:
! 5551: if test $supports_anon_versioning = yes; then
! 5552: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
! 5553: cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
! 5554: $echo "local: *; };" >> $output_objdir/$libname.ver~
! 5555: $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
! 5556: fi
! 5557: else
! 5558: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5559: fi
! 5560: ;;
! 5561:
! 5562: netbsd*)
! 5563: if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
! 5564: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
! 5565: wlarc=
! 5566: else
! 5567: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 5568: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
! 5569: fi
! 5570: ;;
! 5571:
! 5572: solaris*)
! 5573: if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
! 5574: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5575: cat <<EOF 1>&2
! 5576:
! 5577: *** Warning: The releases 2.8.* of the GNU linker cannot reliably
! 5578: *** create shared libraries on Solaris systems. Therefore, libtool
! 5579: *** is disabling shared libraries support. We urge you to upgrade GNU
! 5580: *** binutils to release 2.9.1 or newer. Another option is to modify
! 5581: *** your PATH or compiler configuration so that the native linker is
! 5582: *** used, and then restart.
! 5583:
! 5584: EOF
! 5585: elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
! 5586: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 5587: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
! 5588: else
! 5589: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5590: fi
! 5591: ;;
! 5592:
! 5593: sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
! 5594: case `$LD -v 2>&1` in
! 5595: *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
! 5596: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5597: cat <<_LT_EOF 1>&2
! 5598:
! 5599: *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
! 5600: *** reliably create shared libraries on SCO systems. Therefore, libtool
! 5601: *** is disabling shared libraries support. We urge you to upgrade GNU
! 5602: *** binutils to release 2.16.91.0.3 or newer. Another option is to modify
! 5603: *** your PATH or compiler configuration so that the native linker is
! 5604: *** used, and then restart.
! 5605:
! 5606: _LT_EOF
! 5607: ;;
! 5608: *)
! 5609: if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
! 5610: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
! 5611: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
! 5612: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
! 5613: else
! 5614: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5615: fi
! 5616: ;;
! 5617: esac
! 5618: ;;
! 5619:
! 5620: sunos4*)
! 5621: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
! 5622: wlarc=
! 5623: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5624: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5625: ;;
! 5626:
! 5627: *)
! 5628: if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
! 5629: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
! 5630: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
! 5631: else
! 5632: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5633: fi
! 5634: ;;
! 5635: esac
! 5636:
! 5637: if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
! 5638: runpath_var=
! 5639: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
! 5640: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
! 5641: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
! 5642: fi
! 5643: else
! 5644: # PORTME fill in a description of your system's linker (not GNU ld)
! 5645: case $host_os in
! 5646: aix3*)
! 5647: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 5648: _LT_AC_TAGVAR(always_export_symbols, $1)=yes
! 5649: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
! 5650: # Note: this linker hardcodes the directories in LIBPATH if there
! 5651: # are no directories specified by -L.
! 5652: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5653: if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
! 5654: # Neither direct hardcoding nor static linking is supported with a
! 5655: # broken collect2.
! 5656: _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
! 5657: fi
! 5658: ;;
! 5659:
! 5660: aix4* | aix5*)
! 5661: if test "$host_cpu" = ia64; then
! 5662: # On IA64, the linker does run time linking by default, so we don't
! 5663: # have to do anything special.
! 5664: aix_use_runtimelinking=no
! 5665: exp_sym_flag='-Bexport'
! 5666: no_entry_flag=""
! 5667: else
! 5668: # If we're using GNU nm, then we don't want the "-C" option.
! 5669: # -C means demangle to AIX nm, but means don't demangle with GNU nm
! 5670: if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
! 5671: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
! 5672: else
! 5673: _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
! 5674: fi
! 5675: aix_use_runtimelinking=no
! 5676:
! 5677: # Test if we are trying to use run time linking or normal
! 5678: # AIX style linking. If -brtl is somewhere in LDFLAGS, we
! 5679: # need to do runtime linking.
! 5680: case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
! 5681: for ld_flag in $LDFLAGS; do
! 5682: if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
! 5683: aix_use_runtimelinking=yes
! 5684: break
! 5685: fi
! 5686: done
! 5687: ;;
! 5688: esac
! 5689:
! 5690: exp_sym_flag='-bexport'
! 5691: no_entry_flag='-bnoentry'
! 5692: fi
! 5693:
! 5694: # When large executables or shared objects are built, AIX ld can
! 5695: # have problems creating the table of contents. If linking a library
! 5696: # or program results in "error TOC overflow" add -mminimal-toc to
! 5697: # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
! 5698: # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
! 5699:
! 5700: _LT_AC_TAGVAR(archive_cmds, $1)=''
! 5701: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5702: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
! 5703: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 5704:
! 5705: if test "$GCC" = yes; then
! 5706: case $host_os in aix4.[[012]]|aix4.[[012]].*)
! 5707: # We only want to do this on AIX 4.2 and lower, the check
! 5708: # below for broken collect2 doesn't work under 4.3+
! 5709: collect2name=`${CC} -print-prog-name=collect2`
! 5710: if test -f "$collect2name" && \
! 5711: strings "$collect2name" | grep resolve_lib_name >/dev/null
! 5712: then
! 5713: # We have reworked collect2
! 5714: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5715: else
! 5716: # We have old collect2
! 5717: _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
! 5718: # It fails to find uninstalled libraries when the uninstalled
! 5719: # path is not listed in the libpath. Setting hardcode_minus_L
! 5720: # to unsupported forces relinking
! 5721: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5722: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 5723: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
! 5724: fi
! 5725: ;;
! 5726: esac
! 5727: shared_flag='-shared'
! 5728: if test "$aix_use_runtimelinking" = yes; then
! 5729: shared_flag="$shared_flag "'${wl}-G'
! 5730: fi
! 5731: else
! 5732: # not using gcc
! 5733: if test "$host_cpu" = ia64; then
! 5734: # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
! 5735: # chokes on -Wl,-G. The following line is correct:
! 5736: shared_flag='-G'
! 5737: else
! 5738: if test "$aix_use_runtimelinking" = yes; then
! 5739: shared_flag='${wl}-G'
! 5740: else
! 5741: shared_flag='${wl}-bM:SRE'
! 5742: fi
! 5743: fi
! 5744: fi
! 5745:
! 5746: # It seems that -bexpall does not export symbols beginning with
! 5747: # underscore (_), so it is better to generate a list of symbols to export.
! 5748: _LT_AC_TAGVAR(always_export_symbols, $1)=yes
! 5749: if test "$aix_use_runtimelinking" = yes; then
! 5750: # Warning - without using the other runtime loading flags (-brtl),
! 5751: # -berok will link without error, but may produce a broken library.
! 5752: _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
! 5753: # Determine the default libpath from the value encoded in an empty executable.
! 5754: _LT_AC_SYS_LIBPATH_AIX
! 5755: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
! 5756: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
! 5757: else
! 5758: if test "$host_cpu" = ia64; then
! 5759: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
! 5760: _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
! 5761: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
! 5762: else
! 5763: # Determine the default libpath from the value encoded in an empty executable.
! 5764: _LT_AC_SYS_LIBPATH_AIX
! 5765: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
! 5766: # Warning - without using the other run time loading flags,
! 5767: # -berok will link without error, but may produce a broken library.
! 5768: _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
! 5769: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
! 5770: # Exported symbols can be pulled into shared objects from archives
! 5771: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
! 5772: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
! 5773: # This is similar to how AIX traditionally builds its shared libraries.
! 5774: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
! 5775: fi
! 5776: fi
! 5777: ;;
! 5778:
! 5779: amigaos*)
! 5780: _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
! 5781: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 5782: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5783: # see comment about different semantics on the GNU ld section
! 5784: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5785: ;;
! 5786:
! 5787: bsdi[[45]]*)
! 5788: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
! 5789: ;;
! 5790:
! 5791: cygwin* | mingw* | pw32*)
! 5792: # When not using gcc, we currently assume that we are using
! 5793: # Microsoft Visual C++.
! 5794: # hardcode_libdir_flag_spec is actually meaningless, as there is
! 5795: # no search path for DLLs.
! 5796: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
! 5797: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 5798: # Tell ltmain to make .lib files, not .a files.
! 5799: libext=lib
! 5800: # Tell ltmain to make .dll files, not .so files.
! 5801: shrext_cmds=".dll"
! 5802: # FIXME: Setting linknames here is a bad hack.
! 5803: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
! 5804: # The linker will automatically build a .lib file if we build a DLL.
! 5805: _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
! 5806: # FIXME: Should let the user specify the lib program.
! 5807: _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
! 5808: _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
! 5809: _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
! 5810: ;;
! 5811:
! 5812: darwin* | rhapsody*)
! 5813: case $host_os in
! 5814: rhapsody* | darwin1.[[012]])
! 5815: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
! 5816: ;;
! 5817: *) # Darwin 1.3 on
! 5818: if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
! 5819: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
! 5820: else
! 5821: case ${MACOSX_DEPLOYMENT_TARGET} in
! 5822: 10.[[012]])
! 5823: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
! 5824: ;;
! 5825: 10.*)
! 5826: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
! 5827: ;;
! 5828: esac
! 5829: fi
! 5830: ;;
! 5831: esac
! 5832: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 5833: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 5834: _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
! 5835: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
! 5836: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
! 5837: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 5838: if test "$GCC" = yes ; then
! 5839: output_verbose_link_cmd='echo'
! 5840: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
! 5841: _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
! 5842: # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
! 5843: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 5844: _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 5845: else
! 5846: case $cc_basename in
! 5847: xlc*)
! 5848: output_verbose_link_cmd='echo'
! 5849: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
! 5850: _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
! 5851: # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
! 5852: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 5853: _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
! 5854: ;;
! 5855: *)
! 5856: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5857: ;;
! 5858: esac
! 5859: fi
! 5860: ;;
! 5861:
! 5862: dgux*)
! 5863: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 5864: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 5865: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5866: ;;
! 5867:
! 5868: freebsd1*)
! 5869: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 5870: ;;
! 5871:
! 5872: # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
! 5873: # support. Future versions do this automatically, but an explicit c++rt0.o
! 5874: # does not break anything, and helps significantly (at the cost of a little
! 5875: # extra space).
! 5876: freebsd2.2*)
! 5877: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
! 5878: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 5879: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5880: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5881: ;;
! 5882:
! 5883: # Unfortunately, older versions of FreeBSD 2 do not have this feature.
! 5884: freebsd2*)
! 5885: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
! 5886: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5887: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5888: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5889: ;;
! 5890:
! 5891: # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
! 5892: freebsd* | kfreebsd*-gnu | dragonfly*)
! 5893: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
! 5894: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 5895: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5896: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5897: ;;
! 5898:
! 5899: hpux9*)
! 5900: if test "$GCC" = yes; then
! 5901: _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
! 5902: else
! 5903: _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
! 5904: fi
! 5905: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
! 5906: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 5907: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5908:
! 5909: # hardcode_minus_L: Not really in the search PATH,
! 5910: # but as the default location of the library.
! 5911: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5912: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 5913: ;;
! 5914:
! 5915: hpux10*)
! 5916: if test "$GCC" = yes -a "$with_gnu_ld" = no; then
! 5917: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
! 5918: else
! 5919: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
! 5920: fi
! 5921: if test "$with_gnu_ld" = no; then
! 5922: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
! 5923: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 5924:
! 5925: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5926: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 5927:
! 5928: # hardcode_minus_L: Not really in the search PATH,
! 5929: # but as the default location of the library.
! 5930: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5931: fi
! 5932: ;;
! 5933:
! 5934: hpux11*)
! 5935: if test "$GCC" = yes -a "$with_gnu_ld" = no; then
! 5936: case $host_cpu in
! 5937: hppa*64*)
! 5938: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 5939: ;;
! 5940: ia64*)
! 5941: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
! 5942: ;;
! 5943: *)
! 5944: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
! 5945: ;;
! 5946: esac
! 5947: else
! 5948: case $host_cpu in
! 5949: hppa*64*)
! 5950: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 5951: ;;
! 5952: ia64*)
! 5953: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
! 5954: ;;
! 5955: *)
! 5956: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
! 5957: ;;
! 5958: esac
! 5959: fi
! 5960: if test "$with_gnu_ld" = no; then
! 5961: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
! 5962: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 5963:
! 5964: case $host_cpu in
! 5965: hppa*64*|ia64*)
! 5966: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
! 5967: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 5968: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 5969: ;;
! 5970: *)
! 5971: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 5972: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 5973:
! 5974: # hardcode_minus_L: Not really in the search PATH,
! 5975: # but as the default location of the library.
! 5976: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 5977: ;;
! 5978: esac
! 5979: fi
! 5980: ;;
! 5981:
! 5982: irix5* | irix6* | nonstopux*)
! 5983: if test "$GCC" = yes; then
! 5984: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
! 5985: else
! 5986: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
! 5987: _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
! 5988: fi
! 5989: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 5990: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 5991: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 5992: ;;
! 5993:
! 5994: netbsd*)
! 5995: if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
! 5996: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
! 5997: else
! 5998: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
! 5999: fi
! 6000: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 6001: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 6002: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6003: ;;
! 6004:
! 6005: newsos6)
! 6006: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6007: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 6008: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 6009: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 6010: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6011: ;;
! 6012:
! 6013: openbsd*)
! 6014: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 6015: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6016: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
! 6017: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
! 6018: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
! 6019: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 6020: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
! 6021: else
! 6022: case $host_os in
! 6023: openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
! 6024: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
! 6025: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 6026: ;;
! 6027: *)
! 6028: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
! 6029: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
! 6030: ;;
! 6031: esac
! 6032: fi
! 6033: ;;
! 6034:
! 6035: os2*)
! 6036: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 6037: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 6038: _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
! 6039: _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
! 6040: _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
! 6041: ;;
! 6042:
! 6043: osf3*)
! 6044: if test "$GCC" = yes; then
! 6045: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
! 6046: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
! 6047: else
! 6048: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
! 6049: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
! 6050: fi
! 6051: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 6052: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 6053: ;;
! 6054:
! 6055: osf4* | osf5*) # as osf3* with the addition of -msym flag
! 6056: if test "$GCC" = yes; then
! 6057: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
! 6058: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
! 6059: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
! 6060: else
! 6061: _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
! 6062: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
! 6063: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
! 6064: $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
! 6065:
! 6066: # Both c and cxx compiler support -rpath directly
! 6067: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
! 6068: fi
! 6069: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
! 6070: ;;
! 6071:
! 6072: solaris*)
! 6073: _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
! 6074: if test "$GCC" = yes; then
! 6075: wlarc='${wl}'
! 6076: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6077: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
! 6078: $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
! 6079: else
! 6080: wlarc=''
! 6081: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6082: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
! 6083: $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
! 6084: fi
! 6085: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
! 6086: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6087: case $host_os in
! 6088: solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
! 6089: *)
! 6090: # The compiler driver will combine linker options so we
! 6091: # cannot just pass the convience library names through
! 6092: # without $wl, iff we do not link with $LD.
! 6093: # Luckily, gcc supports the same syntax we need for Sun Studio.
! 6094: # Supported since Solaris 2.6 (maybe 2.5.1?)
! 6095: case $wlarc in
! 6096: '')
! 6097: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
! 6098: *)
! 6099: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
! 6100: esac ;;
! 6101: esac
! 6102: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 6103: ;;
! 6104:
! 6105: sunos4*)
! 6106: if test "x$host_vendor" = xsequent; then
! 6107: # Use $CC to link under sequent, because it throws in some extra .o
! 6108: # files that make .init and .fini sections work.
! 6109: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
! 6110: else
! 6111: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
! 6112: fi
! 6113: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 6114: _LT_AC_TAGVAR(hardcode_direct, $1)=yes
! 6115: _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
! 6116: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6117: ;;
! 6118:
! 6119: sysv4)
! 6120: case $host_vendor in
! 6121: sni)
! 6122: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6123: _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
! 6124: ;;
! 6125: siemens)
! 6126: ## LD is ld it makes a PLAMLIB
! 6127: ## CC just makes a GrossModule.
! 6128: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
! 6129: _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
! 6130: _LT_AC_TAGVAR(hardcode_direct, $1)=no
! 6131: ;;
! 6132: motorola)
! 6133: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6134: _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
! 6135: ;;
! 6136: esac
! 6137: runpath_var='LD_RUN_PATH'
! 6138: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6139: ;;
! 6140:
! 6141: sysv4.3*)
! 6142: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6143: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6144: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
! 6145: ;;
! 6146:
! 6147: sysv4*MP*)
! 6148: if test -d /usr/nec; then
! 6149: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6150: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6151: runpath_var=LD_RUN_PATH
! 6152: hardcode_runpath_var=yes
! 6153: _LT_AC_TAGVAR(ld_shlibs, $1)=yes
! 6154: fi
! 6155: ;;
! 6156:
! 6157: sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*)
! 6158: _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
! 6159: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 6160: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6161: runpath_var='LD_RUN_PATH'
! 6162:
! 6163: if test "$GCC" = yes; then
! 6164: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6165: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6166: else
! 6167: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6168: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6169: fi
! 6170: ;;
! 6171:
! 6172: sysv5* | sco3.2v5* | sco5v6*)
! 6173: # Note: We can NOT use -z defs as we might desire, because we do not
! 6174: # link with -lc, and that would cause any symbols used from libc to
! 6175: # always be unresolved, which means just about no library would
! 6176: # ever link correctly. If we're not using GNU ld we use -z text
! 6177: # though, which does catch some bad symbols but isn't as heavy-handed
! 6178: # as -z defs.
! 6179: _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
! 6180: _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
! 6181: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 6182: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6183: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
! 6184: _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
! 6185: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
! 6186: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
! 6187: runpath_var='LD_RUN_PATH'
! 6188:
! 6189: if test "$GCC" = yes; then
! 6190: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6191: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6192: else
! 6193: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6194: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
! 6195: fi
! 6196: ;;
! 6197:
! 6198: uts4*)
! 6199: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
! 6200: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
! 6201: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
! 6202: ;;
! 6203:
! 6204: *)
! 6205: _LT_AC_TAGVAR(ld_shlibs, $1)=no
! 6206: ;;
! 6207: esac
! 6208: fi
! 6209: ])
! 6210: AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
! 6211: test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
! 6212:
! 6213: #
! 6214: # Do we need to explicitly link libc?
! 6215: #
! 6216: case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
! 6217: x|xyes)
! 6218: # Assume -lc should be added
! 6219: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
! 6220:
! 6221: if test "$enable_shared" = yes && test "$GCC" = yes; then
! 6222: case $_LT_AC_TAGVAR(archive_cmds, $1) in
! 6223: *'~'*)
! 6224: # FIXME: we may have to deal with multi-command sequences.
! 6225: ;;
! 6226: '$CC '*)
! 6227: # Test whether the compiler implicitly links with -lc since on some
! 6228: # systems, -lgcc has to come before -lc. If gcc already passes -lc
! 6229: # to ld, don't add -lc before -lgcc.
! 6230: AC_MSG_CHECKING([whether -lc should be explicitly linked in])
! 6231: $rm conftest*
! 6232: printf "$lt_simple_compile_test_code" > conftest.$ac_ext
! 6233:
! 6234: if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
! 6235: soname=conftest
! 6236: lib=conftest
! 6237: libobjs=conftest.$ac_objext
! 6238: deplibs=
! 6239: wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
! 6240: pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
! 6241: compiler_flags=-v
! 6242: linker_flags=-v
! 6243: verstring=
! 6244: output_objdir=.
! 6245: libname=conftest
! 6246: lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
! 6247: _LT_AC_TAGVAR(allow_undefined_flag, $1)=
! 6248: if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
! 6249: then
! 6250: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
! 6251: else
! 6252: _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
! 6253: fi
! 6254: _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
! 6255: else
! 6256: cat conftest.err 1>&5
! 6257: fi
! 6258: $rm conftest*
! 6259: AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
! 6260: ;;
! 6261: esac
! 6262: fi
! 6263: ;;
! 6264: esac
! 6265: ])# AC_LIBTOOL_PROG_LD_SHLIBS
! 6266:
! 6267:
! 6268: # _LT_AC_FILE_LTDLL_C
! 6269: # -------------------
! 6270: # Be careful that the start marker always follows a newline.
! 6271: AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
! 6272: # /* ltdll.c starts here */
! 6273: # #define WIN32_LEAN_AND_MEAN
! 6274: # #include <windows.h>
! 6275: # #undef WIN32_LEAN_AND_MEAN
! 6276: # #include <stdio.h>
! 6277: #
! 6278: # #ifndef __CYGWIN__
! 6279: # # ifdef __CYGWIN32__
! 6280: # # define __CYGWIN__ __CYGWIN32__
! 6281: # # endif
! 6282: # #endif
! 6283: #
! 6284: # #ifdef __cplusplus
! 6285: # extern "C" {
! 6286: # #endif
! 6287: # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
! 6288: # #ifdef __cplusplus
! 6289: # }
! 6290: # #endif
! 6291: #
! 6292: # #ifdef __CYGWIN__
! 6293: # #include <cygwin/cygwin_dll.h>
! 6294: # DECLARE_CYGWIN_DLL( DllMain );
! 6295: # #endif
! 6296: # HINSTANCE __hDllInstance_base;
! 6297: #
! 6298: # BOOL APIENTRY
! 6299: # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
! 6300: # {
! 6301: # __hDllInstance_base = hInst;
! 6302: # return TRUE;
! 6303: # }
! 6304: # /* ltdll.c ends here */
! 6305: ])# _LT_AC_FILE_LTDLL_C
! 6306:
! 6307:
! 6308: # _LT_AC_TAGVAR(VARNAME, [TAGNAME])
! 6309: # ---------------------------------
! 6310: AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
! 6311:
! 6312:
! 6313: # old names
! 6314: AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
! 6315: AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
! 6316: AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
! 6317: AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
! 6318: AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
! 6319: AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
! 6320: AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
! 6321:
! 6322: # This is just to silence aclocal about the macro not being used
! 6323: ifelse([AC_DISABLE_FAST_INSTALL])
! 6324:
! 6325: AC_DEFUN([LT_AC_PROG_GCJ],
! 6326: [AC_CHECK_TOOL(GCJ, gcj, no)
! 6327: test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
! 6328: AC_SUBST(GCJFLAGS)
! 6329: ])
! 6330:
! 6331: AC_DEFUN([LT_AC_PROG_RC],
! 6332: [AC_CHECK_TOOL(RC, windres, no)
! 6333: ])
! 6334:
! 6335: # NOTE: This macro has been submitted for inclusion into #
! 6336: # GNU Autoconf as AC_PROG_SED. When it is available in #
! 6337: # a released version of Autoconf we should remove this #
! 6338: # macro and use it instead. #
! 6339: # LT_AC_PROG_SED
! 6340: # --------------
! 6341: # Check for a fully-functional sed program, that truncates
! 6342: # as few characters as possible. Prefer GNU sed if found.
! 6343: AC_DEFUN([LT_AC_PROG_SED],
! 6344: [AC_MSG_CHECKING([for a sed that does not truncate output])
! 6345: AC_CACHE_VAL(lt_cv_path_SED,
! 6346: [# Loop through the user's path and test for sed and gsed.
! 6347: # Then use that list of sed's as ones to test for truncation.
! 6348: as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
! 6349: for as_dir in $PATH
! 6350: do
! 6351: IFS=$as_save_IFS
! 6352: test -z "$as_dir" && as_dir=.
! 6353: for lt_ac_prog in sed gsed; do
! 6354: for ac_exec_ext in '' $ac_executable_extensions; do
! 6355: if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
! 6356: lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
! 6357: fi
! 6358: done
! 6359: done
! 6360: done
! 6361: lt_ac_max=0
! 6362: lt_ac_count=0
! 6363: # Add /usr/xpg4/bin/sed as it is typically found on Solaris
! 6364: # along with /bin/sed that truncates output.
! 6365: for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
! 6366: test ! -f $lt_ac_sed && continue
! 6367: cat /dev/null > conftest.in
! 6368: lt_ac_count=0
! 6369: echo $ECHO_N "0123456789$ECHO_C" >conftest.in
! 6370: # Check for GNU sed and select it if it is found.
! 6371: if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
! 6372: lt_cv_path_SED=$lt_ac_sed
! 6373: break
! 6374: fi
! 6375: while true; do
! 6376: cat conftest.in conftest.in >conftest.tmp
! 6377: mv conftest.tmp conftest.in
! 6378: cp conftest.in conftest.nl
! 6379: echo >>conftest.nl
! 6380: $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
! 6381: cmp -s conftest.out conftest.nl || break
! 6382: # 10000 chars as input seems more than enough
! 6383: test $lt_ac_count -gt 10 && break
! 6384: lt_ac_count=`expr $lt_ac_count + 1`
! 6385: if test $lt_ac_count -gt $lt_ac_max; then
! 6386: lt_ac_max=$lt_ac_count
! 6387: lt_cv_path_SED=$lt_ac_sed
! 6388: fi
! 6389: done
! 6390: done
! 6391: ])
! 6392: SED=$lt_cv_path_SED
! 6393: AC_MSG_RESULT([$SED])
! 6394: ])
! 6395:
! 6396: # Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
! 6397: #
! 6398: # This file is free software; the Free Software Foundation
! 6399: # gives unlimited permission to copy and/or distribute it,
! 6400: # with or without modifications, as long as this notice is preserved.
! 6401:
! 6402: # AM_AUTOMAKE_VERSION(VERSION)
! 6403: # ----------------------------
! 6404: # Automake X.Y traces this macro to ensure aclocal.m4 has been
! 6405: # generated from the m4 files accompanying Automake X.Y.
! 6406: # (This private macro should not be called outside this file.)
! 6407: AC_DEFUN([AM_AUTOMAKE_VERSION],
! 6408: [am__api_version='1.10'
! 6409: dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
! 6410: dnl require some minimum version. Point them to the right macro.
! 6411: m4_if([$1], [1.10], [],
! 6412: [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
! 6413: ])
! 6414:
! 6415: # _AM_AUTOCONF_VERSION(VERSION)
! 6416: # -----------------------------
! 6417: # aclocal traces this macro to find the Autoconf version.
! 6418: # This is a private macro too. Using m4_define simplifies
! 6419: # the logic in aclocal, which can simply ignore this definition.
! 6420: m4_define([_AM_AUTOCONF_VERSION], [])
! 6421:
! 6422: # AM_SET_CURRENT_AUTOMAKE_VERSION
! 6423: # -------------------------------
! 6424: # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
! 6425: # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
! 6426: AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
! 6427: [AM_AUTOMAKE_VERSION([1.10])dnl
! 6428: _AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
! 6429:
! 6430: # AM_AUX_DIR_EXPAND -*- Autoconf -*-
! 6431:
! 6432: # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
! 6433: #
! 6434: # This file is free software; the Free Software Foundation
! 6435: # gives unlimited permission to copy and/or distribute it,
! 6436: # with or without modifications, as long as this notice is preserved.
! 6437:
! 6438: # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
! 6439: # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
! 6440: # `$srcdir', `$srcdir/..', or `$srcdir/../..'.
! 6441: #
! 6442: # Of course, Automake must honor this variable whenever it calls a
! 6443: # tool from the auxiliary directory. The problem is that $srcdir (and
! 6444: # therefore $ac_aux_dir as well) can be either absolute or relative,
! 6445: # depending on how configure is run. This is pretty annoying, since
! 6446: # it makes $ac_aux_dir quite unusable in subdirectories: in the top
! 6447: # source directory, any form will work fine, but in subdirectories a
! 6448: # relative path needs to be adjusted first.
! 6449: #
! 6450: # $ac_aux_dir/missing
! 6451: # fails when called from a subdirectory if $ac_aux_dir is relative
! 6452: # $top_srcdir/$ac_aux_dir/missing
! 6453: # fails if $ac_aux_dir is absolute,
! 6454: # fails when called from a subdirectory in a VPATH build with
! 6455: # a relative $ac_aux_dir
! 6456: #
! 6457: # The reason of the latter failure is that $top_srcdir and $ac_aux_dir
! 6458: # are both prefixed by $srcdir. In an in-source build this is usually
! 6459: # harmless because $srcdir is `.', but things will broke when you
! 6460: # start a VPATH build or use an absolute $srcdir.
! 6461: #
! 6462: # So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
! 6463: # iff we strip the leading $srcdir from $ac_aux_dir. That would be:
! 6464: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
! 6465: # and then we would define $MISSING as
! 6466: # MISSING="\${SHELL} $am_aux_dir/missing"
! 6467: # This will work as long as MISSING is not called from configure, because
! 6468: # unfortunately $(top_srcdir) has no meaning in configure.
! 6469: # However there are other variables, like CC, which are often used in
! 6470: # configure, and could therefore not use this "fixed" $ac_aux_dir.
! 6471: #
! 6472: # Another solution, used here, is to always expand $ac_aux_dir to an
! 6473: # absolute PATH. The drawback is that using absolute paths prevent a
! 6474: # configured tree to be moved without reconfiguration.
! 6475:
! 6476: AC_DEFUN([AM_AUX_DIR_EXPAND],
! 6477: [dnl Rely on autoconf to set up CDPATH properly.
! 6478: AC_PREREQ([2.50])dnl
! 6479: # expand $ac_aux_dir to an absolute path
! 6480: am_aux_dir=`cd $ac_aux_dir && pwd`
! 6481: ])
! 6482:
! 6483: # AM_CONDITIONAL -*- Autoconf -*-
! 6484:
! 6485: # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
! 6486: # Free Software Foundation, Inc.
! 6487: #
! 6488: # This file is free software; the Free Software Foundation
! 6489: # gives unlimited permission to copy and/or distribute it,
! 6490: # with or without modifications, as long as this notice is preserved.
! 6491:
! 6492: # serial 8
! 6493:
! 6494: # AM_CONDITIONAL(NAME, SHELL-CONDITION)
! 6495: # -------------------------------------
! 6496: # Define a conditional.
! 6497: AC_DEFUN([AM_CONDITIONAL],
! 6498: [AC_PREREQ(2.52)dnl
! 6499: ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
! 6500: [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
! 6501: AC_SUBST([$1_TRUE])dnl
! 6502: AC_SUBST([$1_FALSE])dnl
! 6503: _AM_SUBST_NOTMAKE([$1_TRUE])dnl
! 6504: _AM_SUBST_NOTMAKE([$1_FALSE])dnl
! 6505: if $2; then
! 6506: $1_TRUE=
! 6507: $1_FALSE='#'
! 6508: else
! 6509: $1_TRUE='#'
! 6510: $1_FALSE=
! 6511: fi
! 6512: AC_CONFIG_COMMANDS_PRE(
! 6513: [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
! 6514: AC_MSG_ERROR([[conditional "$1" was never defined.
! 6515: Usually this means the macro was only invoked conditionally.]])
! 6516: fi])])
! 6517:
! 6518: # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
! 6519: # Free Software Foundation, Inc.
! 6520: #
! 6521: # This file is free software; the Free Software Foundation
! 6522: # gives unlimited permission to copy and/or distribute it,
! 6523: # with or without modifications, as long as this notice is preserved.
! 6524:
! 6525: # serial 9
! 6526:
! 6527: # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
! 6528: # written in clear, in which case automake, when reading aclocal.m4,
! 6529: # will think it sees a *use*, and therefore will trigger all it's
! 6530: # C support machinery. Also note that it means that autoscan, seeing
! 6531: # CC etc. in the Makefile, will ask for an AC_PROG_CC use...
! 6532:
! 6533:
! 6534: # _AM_DEPENDENCIES(NAME)
! 6535: # ----------------------
! 6536: # See how the compiler implements dependency checking.
! 6537: # NAME is "CC", "CXX", "GCJ", or "OBJC".
! 6538: # We try a few techniques and use that to set a single cache variable.
! 6539: #
! 6540: # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
! 6541: # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
! 6542: # dependency, and given that the user is not expected to run this macro,
! 6543: # just rely on AC_PROG_CC.
! 6544: AC_DEFUN([_AM_DEPENDENCIES],
! 6545: [AC_REQUIRE([AM_SET_DEPDIR])dnl
! 6546: AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
! 6547: AC_REQUIRE([AM_MAKE_INCLUDE])dnl
! 6548: AC_REQUIRE([AM_DEP_TRACK])dnl
! 6549:
! 6550: ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
! 6551: [$1], CXX, [depcc="$CXX" am_compiler_list=],
! 6552: [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
! 6553: [$1], UPC, [depcc="$UPC" am_compiler_list=],
! 6554: [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
! 6555: [depcc="$$1" am_compiler_list=])
! 6556:
! 6557: AC_CACHE_CHECK([dependency style of $depcc],
! 6558: [am_cv_$1_dependencies_compiler_type],
! 6559: [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
! 6560: # We make a subdir and do the tests there. Otherwise we can end up
! 6561: # making bogus files that we don't know about and never remove. For
! 6562: # instance it was reported that on HP-UX the gcc test will end up
! 6563: # making a dummy file named `D' -- because `-MD' means `put the output
! 6564: # in D'.
! 6565: mkdir conftest.dir
! 6566: # Copy depcomp to subdir because otherwise we won't find it if we're
! 6567: # using a relative directory.
! 6568: cp "$am_depcomp" conftest.dir
! 6569: cd conftest.dir
! 6570: # We will build objects and dependencies in a subdirectory because
! 6571: # it helps to detect inapplicable dependency modes. For instance
! 6572: # both Tru64's cc and ICC support -MD to output dependencies as a
! 6573: # side effect of compilation, but ICC will put the dependencies in
! 6574: # the current directory while Tru64 will put them in the object
! 6575: # directory.
! 6576: mkdir sub
! 6577:
! 6578: am_cv_$1_dependencies_compiler_type=none
! 6579: if test "$am_compiler_list" = ""; then
! 6580: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
! 6581: fi
! 6582: for depmode in $am_compiler_list; do
! 6583: # Setup a source with many dependencies, because some compilers
! 6584: # like to wrap large dependency lists on column 80 (with \), and
! 6585: # we should not choose a depcomp mode which is confused by this.
! 6586: #
! 6587: # We need to recreate these files for each test, as the compiler may
! 6588: # overwrite some of them when testing with obscure command lines.
! 6589: # This happens at least with the AIX C compiler.
! 6590: : > sub/conftest.c
! 6591: for i in 1 2 3 4 5 6; do
! 6592: echo '#include "conftst'$i'.h"' >> sub/conftest.c
! 6593: # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
! 6594: # Solaris 8's {/usr,}/bin/sh.
! 6595: touch sub/conftst$i.h
! 6596: done
! 6597: echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
! 6598:
! 6599: case $depmode in
! 6600: nosideeffect)
! 6601: # after this tag, mechanisms are not by side-effect, so they'll
! 6602: # only be used when explicitly requested
! 6603: if test "x$enable_dependency_tracking" = xyes; then
! 6604: continue
! 6605: else
! 6606: break
! 6607: fi
! 6608: ;;
! 6609: none) break ;;
! 6610: esac
! 6611: # We check with `-c' and `-o' for the sake of the "dashmstdout"
! 6612: # mode. It turns out that the SunPro C++ compiler does not properly
! 6613: # handle `-M -o', and we need to detect this.
! 6614: if depmode=$depmode \
! 6615: source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
! 6616: depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
! 6617: $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
! 6618: >/dev/null 2>conftest.err &&
! 6619: grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
! 6620: grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
! 6621: grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
! 6622: ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
! 6623: # icc doesn't choke on unknown options, it will just issue warnings
! 6624: # or remarks (even with -Werror). So we grep stderr for any message
! 6625: # that says an option was ignored or not supported.
! 6626: # When given -MP, icc 7.0 and 7.1 complain thusly:
! 6627: # icc: Command line warning: ignoring option '-M'; no argument required
! 6628: # The diagnosis changed in icc 8.0:
! 6629: # icc: Command line remark: option '-MP' not supported
! 6630: if (grep 'ignoring option' conftest.err ||
! 6631: grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
! 6632: am_cv_$1_dependencies_compiler_type=$depmode
! 6633: break
! 6634: fi
! 6635: fi
! 6636: done
! 6637:
! 6638: cd ..
! 6639: rm -rf conftest.dir
! 6640: else
! 6641: am_cv_$1_dependencies_compiler_type=none
! 6642: fi
! 6643: ])
! 6644: AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
! 6645: AM_CONDITIONAL([am__fastdep$1], [
! 6646: test "x$enable_dependency_tracking" != xno \
! 6647: && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
! 6648: ])
! 6649:
! 6650:
! 6651: # AM_SET_DEPDIR
! 6652: # -------------
! 6653: # Choose a directory name for dependency files.
! 6654: # This macro is AC_REQUIREd in _AM_DEPENDENCIES
! 6655: AC_DEFUN([AM_SET_DEPDIR],
! 6656: [AC_REQUIRE([AM_SET_LEADING_DOT])dnl
! 6657: AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
! 6658: ])
! 6659:
! 6660:
! 6661: # AM_DEP_TRACK
! 6662: # ------------
! 6663: AC_DEFUN([AM_DEP_TRACK],
! 6664: [AC_ARG_ENABLE(dependency-tracking,
! 6665: [ --disable-dependency-tracking speeds up one-time build
! 6666: --enable-dependency-tracking do not reject slow dependency extractors])
! 6667: if test "x$enable_dependency_tracking" != xno; then
! 6668: am_depcomp="$ac_aux_dir/depcomp"
! 6669: AMDEPBACKSLASH='\'
! 6670: fi
! 6671: AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
! 6672: AC_SUBST([AMDEPBACKSLASH])dnl
! 6673: _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
! 6674: ])
! 6675:
! 6676: # Generate code to set up dependency tracking. -*- Autoconf -*-
! 6677:
! 6678: # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
! 6679: # Free Software Foundation, Inc.
! 6680: #
! 6681: # This file is free software; the Free Software Foundation
! 6682: # gives unlimited permission to copy and/or distribute it,
! 6683: # with or without modifications, as long as this notice is preserved.
! 6684:
! 6685: #serial 3
! 6686:
! 6687: # _AM_OUTPUT_DEPENDENCY_COMMANDS
! 6688: # ------------------------------
! 6689: AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
! 6690: [for mf in $CONFIG_FILES; do
! 6691: # Strip MF so we end up with the name of the file.
! 6692: mf=`echo "$mf" | sed -e 's/:.*$//'`
! 6693: # Check whether this is an Automake generated Makefile or not.
! 6694: # We used to match only the files named `Makefile.in', but
! 6695: # some people rename them; so instead we look at the file content.
! 6696: # Grep'ing the first line is not enough: some people post-process
! 6697: # each Makefile.in and add a new line on top of each file to say so.
! 6698: # Grep'ing the whole file is not good either: AIX grep has a line
! 6699: # limit of 2048, but all sed's we know have understand at least 4000.
! 6700: if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
! 6701: dirpart=`AS_DIRNAME("$mf")`
! 6702: else
! 6703: continue
! 6704: fi
! 6705: # Extract the definition of DEPDIR, am__include, and am__quote
! 6706: # from the Makefile without running `make'.
! 6707: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
! 6708: test -z "$DEPDIR" && continue
! 6709: am__include=`sed -n 's/^am__include = //p' < "$mf"`
! 6710: test -z "am__include" && continue
! 6711: am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
! 6712: # When using ansi2knr, U may be empty or an underscore; expand it
! 6713: U=`sed -n 's/^U = //p' < "$mf"`
! 6714: # Find all dependency output files, they are included files with
! 6715: # $(DEPDIR) in their names. We invoke sed twice because it is the
! 6716: # simplest approach to changing $(DEPDIR) to its actual value in the
! 6717: # expansion.
! 6718: for file in `sed -n "
! 6719: s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
! 6720: sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
! 6721: # Make sure the directory exists.
! 6722: test -f "$dirpart/$file" && continue
! 6723: fdir=`AS_DIRNAME(["$file"])`
! 6724: AS_MKDIR_P([$dirpart/$fdir])
! 6725: # echo "creating $dirpart/$file"
! 6726: echo '# dummy' > "$dirpart/$file"
! 6727: done
! 6728: done
! 6729: ])# _AM_OUTPUT_DEPENDENCY_COMMANDS
! 6730:
! 6731:
! 6732: # AM_OUTPUT_DEPENDENCY_COMMANDS
! 6733: # -----------------------------
! 6734: # This macro should only be invoked once -- use via AC_REQUIRE.
! 6735: #
! 6736: # This code is only required when automatic dependency tracking
! 6737: # is enabled. FIXME. This creates each `.P' file that we will
! 6738: # need in order to bootstrap the dependency handling code.
! 6739: AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
! 6740: [AC_CONFIG_COMMANDS([depfiles],
! 6741: [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
! 6742: [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
! 6743: ])
! 6744:
! 6745: # Do all the work for Automake. -*- Autoconf -*-
! 6746:
! 6747: # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
! 6748: # 2005, 2006 Free Software Foundation, Inc.
! 6749: #
! 6750: # This file is free software; the Free Software Foundation
! 6751: # gives unlimited permission to copy and/or distribute it,
! 6752: # with or without modifications, as long as this notice is preserved.
! 6753:
! 6754: # serial 12
! 6755:
! 6756: # This macro actually does too much. Some checks are only needed if
! 6757: # your package does certain things. But this isn't really a big deal.
! 6758:
! 6759: # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
! 6760: # AM_INIT_AUTOMAKE([OPTIONS])
! 6761: # -----------------------------------------------
! 6762: # The call with PACKAGE and VERSION arguments is the old style
! 6763: # call (pre autoconf-2.50), which is being phased out. PACKAGE
! 6764: # and VERSION should now be passed to AC_INIT and removed from
! 6765: # the call to AM_INIT_AUTOMAKE.
! 6766: # We support both call styles for the transition. After
! 6767: # the next Automake release, Autoconf can make the AC_INIT
! 6768: # arguments mandatory, and then we can depend on a new Autoconf
! 6769: # release and drop the old call support.
! 6770: AC_DEFUN([AM_INIT_AUTOMAKE],
! 6771: [AC_PREREQ([2.60])dnl
! 6772: dnl Autoconf wants to disallow AM_ names. We explicitly allow
! 6773: dnl the ones we care about.
! 6774: m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
! 6775: AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
! 6776: AC_REQUIRE([AC_PROG_INSTALL])dnl
! 6777: if test "`cd $srcdir && pwd`" != "`pwd`"; then
! 6778: # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
! 6779: # is not polluted with repeated "-I."
! 6780: AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
! 6781: # test to see if srcdir already configured
! 6782: if test -f $srcdir/config.status; then
! 6783: AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
! 6784: fi
! 6785: fi
! 6786:
! 6787: # test whether we have cygpath
! 6788: if test -z "$CYGPATH_W"; then
! 6789: if (cygpath --version) >/dev/null 2>/dev/null; then
! 6790: CYGPATH_W='cygpath -w'
! 6791: else
! 6792: CYGPATH_W=echo
! 6793: fi
! 6794: fi
! 6795: AC_SUBST([CYGPATH_W])
! 6796:
! 6797: # Define the identity of the package.
! 6798: dnl Distinguish between old-style and new-style calls.
! 6799: m4_ifval([$2],
! 6800: [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
! 6801: AC_SUBST([PACKAGE], [$1])dnl
! 6802: AC_SUBST([VERSION], [$2])],
! 6803: [_AM_SET_OPTIONS([$1])dnl
! 6804: dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
! 6805: m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
! 6806: [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
! 6807: AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
! 6808: AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
! 6809:
! 6810: _AM_IF_OPTION([no-define],,
! 6811: [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
! 6812: AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
! 6813:
! 6814: # Some tools Automake needs.
! 6815: AC_REQUIRE([AM_SANITY_CHECK])dnl
! 6816: AC_REQUIRE([AC_ARG_PROGRAM])dnl
! 6817: AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
! 6818: AM_MISSING_PROG(AUTOCONF, autoconf)
! 6819: AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
! 6820: AM_MISSING_PROG(AUTOHEADER, autoheader)
! 6821: AM_MISSING_PROG(MAKEINFO, makeinfo)
! 6822: AM_PROG_INSTALL_SH
! 6823: AM_PROG_INSTALL_STRIP
! 6824: AC_REQUIRE([AM_PROG_MKDIR_P])dnl
! 6825: # We need awk for the "check" target. The system "awk" is bad on
! 6826: # some platforms.
! 6827: AC_REQUIRE([AC_PROG_AWK])dnl
! 6828: AC_REQUIRE([AC_PROG_MAKE_SET])dnl
! 6829: AC_REQUIRE([AM_SET_LEADING_DOT])dnl
! 6830: _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
! 6831: [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
! 6832: [_AM_PROG_TAR([v7])])])
! 6833: _AM_IF_OPTION([no-dependencies],,
! 6834: [AC_PROVIDE_IFELSE([AC_PROG_CC],
! 6835: [_AM_DEPENDENCIES(CC)],
! 6836: [define([AC_PROG_CC],
! 6837: defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
! 6838: AC_PROVIDE_IFELSE([AC_PROG_CXX],
! 6839: [_AM_DEPENDENCIES(CXX)],
! 6840: [define([AC_PROG_CXX],
! 6841: defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
! 6842: AC_PROVIDE_IFELSE([AC_PROG_OBJC],
! 6843: [_AM_DEPENDENCIES(OBJC)],
! 6844: [define([AC_PROG_OBJC],
! 6845: defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
! 6846: ])
! 6847: ])
! 6848:
! 6849:
! 6850: # When config.status generates a header, we must update the stamp-h file.
! 6851: # This file resides in the same directory as the config header
! 6852: # that is generated. The stamp files are numbered to have different names.
! 6853:
! 6854: # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
! 6855: # loop where config.status creates the headers, so we can generate
! 6856: # our stamp files there.
! 6857: AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
! 6858: [# Compute $1's index in $config_headers.
! 6859: _am_stamp_count=1
! 6860: for _am_header in $config_headers :; do
! 6861: case $_am_header in
! 6862: $1 | $1:* )
! 6863: break ;;
! 6864: * )
! 6865: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
! 6866: esac
! 6867: done
! 6868: echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
! 6869:
! 6870: # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
! 6871: #
! 6872: # This file is free software; the Free Software Foundation
! 6873: # gives unlimited permission to copy and/or distribute it,
! 6874: # with or without modifications, as long as this notice is preserved.
! 6875:
! 6876: # AM_PROG_INSTALL_SH
! 6877: # ------------------
! 6878: # Define $install_sh.
! 6879: AC_DEFUN([AM_PROG_INSTALL_SH],
! 6880: [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
! 6881: install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
! 6882: AC_SUBST(install_sh)])
! 6883:
! 6884: # Copyright (C) 2003, 2005 Free Software Foundation, Inc.
! 6885: #
! 6886: # This file is free software; the Free Software Foundation
! 6887: # gives unlimited permission to copy and/or distribute it,
! 6888: # with or without modifications, as long as this notice is preserved.
! 6889:
! 6890: # serial 2
! 6891:
! 6892: # Check whether the underlying file-system supports filenames
! 6893: # with a leading dot. For instance MS-DOS doesn't.
! 6894: AC_DEFUN([AM_SET_LEADING_DOT],
! 6895: [rm -rf .tst 2>/dev/null
! 6896: mkdir .tst 2>/dev/null
! 6897: if test -d .tst; then
! 6898: am__leading_dot=.
! 6899: else
! 6900: am__leading_dot=_
! 6901: fi
! 6902: rmdir .tst 2>/dev/null
! 6903: AC_SUBST([am__leading_dot])])
! 6904:
! 6905: # Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
! 6906: # From Jim Meyering
! 6907:
! 6908: # Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
! 6909: # Free Software Foundation, Inc.
! 6910: #
! 6911: # This file is free software; the Free Software Foundation
! 6912: # gives unlimited permission to copy and/or distribute it,
! 6913: # with or without modifications, as long as this notice is preserved.
! 6914:
! 6915: # serial 4
! 6916:
! 6917: AC_DEFUN([AM_MAINTAINER_MODE],
! 6918: [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
! 6919: dnl maintainer-mode is disabled by default
! 6920: AC_ARG_ENABLE(maintainer-mode,
! 6921: [ --enable-maintainer-mode enable make rules and dependencies not useful
! 6922: (and sometimes confusing) to the casual installer],
! 6923: USE_MAINTAINER_MODE=$enableval,
! 6924: USE_MAINTAINER_MODE=no)
! 6925: AC_MSG_RESULT([$USE_MAINTAINER_MODE])
! 6926: AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
! 6927: MAINT=$MAINTAINER_MODE_TRUE
! 6928: AC_SUBST(MAINT)dnl
! 6929: ]
! 6930: )
! 6931:
! 6932: AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
! 6933:
! 6934: # Check to see how 'make' treats includes. -*- Autoconf -*-
! 6935:
! 6936: # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
! 6937: #
! 6938: # This file is free software; the Free Software Foundation
! 6939: # gives unlimited permission to copy and/or distribute it,
! 6940: # with or without modifications, as long as this notice is preserved.
! 6941:
! 6942: # serial 3
! 6943:
! 6944: # AM_MAKE_INCLUDE()
! 6945: # -----------------
! 6946: # Check to see how make treats includes.
! 6947: AC_DEFUN([AM_MAKE_INCLUDE],
! 6948: [am_make=${MAKE-make}
! 6949: cat > confinc << 'END'
! 6950: am__doit:
! 6951: @echo done
! 6952: .PHONY: am__doit
! 6953: END
! 6954: # If we don't find an include directive, just comment out the code.
! 6955: AC_MSG_CHECKING([for style of include used by $am_make])
! 6956: am__include="#"
! 6957: am__quote=
! 6958: _am_result=none
! 6959: # First try GNU make style include.
! 6960: echo "include confinc" > confmf
! 6961: # We grep out `Entering directory' and `Leaving directory'
! 6962: # messages which can occur if `w' ends up in MAKEFLAGS.
! 6963: # In particular we don't look at `^make:' because GNU make might
! 6964: # be invoked under some other name (usually "gmake"), in which
! 6965: # case it prints its new name instead of `make'.
! 6966: if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
! 6967: am__include=include
! 6968: am__quote=
! 6969: _am_result=GNU
! 6970: fi
! 6971: # Now try BSD make style include.
! 6972: if test "$am__include" = "#"; then
! 6973: echo '.include "confinc"' > confmf
! 6974: if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
! 6975: am__include=.include
! 6976: am__quote="\""
! 6977: _am_result=BSD
! 6978: fi
! 6979: fi
! 6980: AC_SUBST([am__include])
! 6981: AC_SUBST([am__quote])
! 6982: AC_MSG_RESULT([$_am_result])
! 6983: rm -f confinc confmf
! 6984: ])
! 6985:
! 6986: # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
! 6987:
! 6988: # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
! 6989: # Free Software Foundation, Inc.
! 6990: #
! 6991: # This file is free software; the Free Software Foundation
! 6992: # gives unlimited permission to copy and/or distribute it,
! 6993: # with or without modifications, as long as this notice is preserved.
! 6994:
! 6995: # serial 5
! 6996:
! 6997: # AM_MISSING_PROG(NAME, PROGRAM)
! 6998: # ------------------------------
! 6999: AC_DEFUN([AM_MISSING_PROG],
! 7000: [AC_REQUIRE([AM_MISSING_HAS_RUN])
! 7001: $1=${$1-"${am_missing_run}$2"}
! 7002: AC_SUBST($1)])
! 7003:
! 7004:
! 7005: # AM_MISSING_HAS_RUN
! 7006: # ------------------
! 7007: # Define MISSING if not defined so far and test if it supports --run.
! 7008: # If it does, set am_missing_run to use it, otherwise, to nothing.
! 7009: AC_DEFUN([AM_MISSING_HAS_RUN],
! 7010: [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
! 7011: AC_REQUIRE_AUX_FILE([missing])dnl
! 7012: test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
! 7013: # Use eval to expand $SHELL
! 7014: if eval "$MISSING --run true"; then
! 7015: am_missing_run="$MISSING --run "
! 7016: else
! 7017: am_missing_run=
! 7018: AC_MSG_WARN([`missing' script is too old or missing])
! 7019: fi
! 7020: ])
! 7021:
! 7022: # Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
! 7023: #
! 7024: # This file is free software; the Free Software Foundation
! 7025: # gives unlimited permission to copy and/or distribute it,
! 7026: # with or without modifications, as long as this notice is preserved.
! 7027:
! 7028: # AM_PROG_MKDIR_P
! 7029: # ---------------
! 7030: # Check for `mkdir -p'.
! 7031: AC_DEFUN([AM_PROG_MKDIR_P],
! 7032: [AC_PREREQ([2.60])dnl
! 7033: AC_REQUIRE([AC_PROG_MKDIR_P])dnl
! 7034: dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
! 7035: dnl while keeping a definition of mkdir_p for backward compatibility.
! 7036: dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
! 7037: dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
! 7038: dnl Makefile.ins that do not define MKDIR_P, so we do our own
! 7039: dnl adjustment using top_builddir (which is defined more often than
! 7040: dnl MKDIR_P).
! 7041: AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
! 7042: case $mkdir_p in
! 7043: [[\\/$]]* | ?:[[\\/]]*) ;;
! 7044: */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
! 7045: esac
! 7046: ])
! 7047:
! 7048: # Helper functions for option handling. -*- Autoconf -*-
! 7049:
! 7050: # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
! 7051: #
! 7052: # This file is free software; the Free Software Foundation
! 7053: # gives unlimited permission to copy and/or distribute it,
! 7054: # with or without modifications, as long as this notice is preserved.
! 7055:
! 7056: # serial 3
! 7057:
! 7058: # _AM_MANGLE_OPTION(NAME)
! 7059: # -----------------------
! 7060: AC_DEFUN([_AM_MANGLE_OPTION],
! 7061: [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
! 7062:
! 7063: # _AM_SET_OPTION(NAME)
! 7064: # ------------------------------
! 7065: # Set option NAME. Presently that only means defining a flag for this option.
! 7066: AC_DEFUN([_AM_SET_OPTION],
! 7067: [m4_define(_AM_MANGLE_OPTION([$1]), 1)])
! 7068:
! 7069: # _AM_SET_OPTIONS(OPTIONS)
! 7070: # ----------------------------------
! 7071: # OPTIONS is a space-separated list of Automake options.
! 7072: AC_DEFUN([_AM_SET_OPTIONS],
! 7073: [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
! 7074:
! 7075: # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
! 7076: # -------------------------------------------
! 7077: # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
! 7078: AC_DEFUN([_AM_IF_OPTION],
! 7079: [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
! 7080:
! 7081: # Check to make sure that the build environment is sane. -*- Autoconf -*-
! 7082:
! 7083: # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
! 7084: # Free Software Foundation, Inc.
! 7085: #
! 7086: # This file is free software; the Free Software Foundation
! 7087: # gives unlimited permission to copy and/or distribute it,
! 7088: # with or without modifications, as long as this notice is preserved.
! 7089:
! 7090: # serial 4
! 7091:
! 7092: # AM_SANITY_CHECK
! 7093: # ---------------
! 7094: AC_DEFUN([AM_SANITY_CHECK],
! 7095: [AC_MSG_CHECKING([whether build environment is sane])
! 7096: # Just in case
! 7097: sleep 1
! 7098: echo timestamp > conftest.file
! 7099: # Do `set' in a subshell so we don't clobber the current shell's
! 7100: # arguments. Must try -L first in case configure is actually a
! 7101: # symlink; some systems play weird games with the mod time of symlinks
! 7102: # (eg FreeBSD returns the mod time of the symlink's containing
! 7103: # directory).
! 7104: if (
! 7105: set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
! 7106: if test "$[*]" = "X"; then
! 7107: # -L didn't work.
! 7108: set X `ls -t $srcdir/configure conftest.file`
! 7109: fi
! 7110: rm -f conftest.file
! 7111: if test "$[*]" != "X $srcdir/configure conftest.file" \
! 7112: && test "$[*]" != "X conftest.file $srcdir/configure"; then
! 7113:
! 7114: # If neither matched, then we have a broken ls. This can happen
! 7115: # if, for instance, CONFIG_SHELL is bash and it inherits a
! 7116: # broken ls alias from the environment. This has actually
! 7117: # happened. Such a system could not be considered "sane".
! 7118: AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
! 7119: alias in your environment])
! 7120: fi
! 7121:
! 7122: test "$[2]" = conftest.file
! 7123: )
! 7124: then
! 7125: # Ok.
! 7126: :
! 7127: else
! 7128: AC_MSG_ERROR([newly created file is older than distributed files!
! 7129: Check your system clock])
! 7130: fi
! 7131: AC_MSG_RESULT(yes)])
! 7132:
! 7133: # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
! 7134: #
! 7135: # This file is free software; the Free Software Foundation
! 7136: # gives unlimited permission to copy and/or distribute it,
! 7137: # with or without modifications, as long as this notice is preserved.
! 7138:
! 7139: # AM_PROG_INSTALL_STRIP
! 7140: # ---------------------
! 7141: # One issue with vendor `install' (even GNU) is that you can't
! 7142: # specify the program used to strip binaries. This is especially
! 7143: # annoying in cross-compiling environments, where the build's strip
! 7144: # is unlikely to handle the host's binaries.
! 7145: # Fortunately install-sh will honor a STRIPPROG variable, so we
! 7146: # always use install-sh in `make install-strip', and initialize
! 7147: # STRIPPROG with the value of the STRIP variable (set by the user).
! 7148: AC_DEFUN([AM_PROG_INSTALL_STRIP],
! 7149: [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
! 7150: # Installed binaries are usually stripped using `strip' when the user
! 7151: # run `make install-strip'. However `strip' might not be the right
! 7152: # tool to use in cross-compilation environments, therefore Automake
! 7153: # will honor the `STRIP' environment variable to overrule this program.
! 7154: dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
! 7155: if test "$cross_compiling" != no; then
! 7156: AC_CHECK_TOOL([STRIP], [strip], :)
! 7157: fi
! 7158: INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
! 7159: AC_SUBST([INSTALL_STRIP_PROGRAM])])
! 7160:
! 7161: # Copyright (C) 2006 Free Software Foundation, Inc.
! 7162: #
! 7163: # This file is free software; the Free Software Foundation
! 7164: # gives unlimited permission to copy and/or distribute it,
! 7165: # with or without modifications, as long as this notice is preserved.
! 7166:
! 7167: # _AM_SUBST_NOTMAKE(VARIABLE)
! 7168: # ---------------------------
! 7169: # Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
! 7170: # This macro is traced by Automake.
! 7171: AC_DEFUN([_AM_SUBST_NOTMAKE])
! 7172:
! 7173: # Check how to create a tarball. -*- Autoconf -*-
! 7174:
! 7175: # Copyright (C) 2004, 2005 Free Software Foundation, Inc.
! 7176: #
! 7177: # This file is free software; the Free Software Foundation
! 7178: # gives unlimited permission to copy and/or distribute it,
! 7179: # with or without modifications, as long as this notice is preserved.
! 7180:
! 7181: # serial 2
! 7182:
! 7183: # _AM_PROG_TAR(FORMAT)
! 7184: # --------------------
! 7185: # Check how to create a tarball in format FORMAT.
! 7186: # FORMAT should be one of `v7', `ustar', or `pax'.
! 7187: #
! 7188: # Substitute a variable $(am__tar) that is a command
! 7189: # writing to stdout a FORMAT-tarball containing the directory
! 7190: # $tardir.
! 7191: # tardir=directory && $(am__tar) > result.tar
! 7192: #
! 7193: # Substitute a variable $(am__untar) that extract such
! 7194: # a tarball read from stdin.
! 7195: # $(am__untar) < result.tar
! 7196: AC_DEFUN([_AM_PROG_TAR],
! 7197: [# Always define AMTAR for backward compatibility.
! 7198: AM_MISSING_PROG([AMTAR], [tar])
! 7199: m4_if([$1], [v7],
! 7200: [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
! 7201: [m4_case([$1], [ustar],, [pax],,
! 7202: [m4_fatal([Unknown tar format])])
! 7203: AC_MSG_CHECKING([how to create a $1 tar archive])
! 7204: # Loop over all known methods to create a tar archive until one works.
! 7205: _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
! 7206: _am_tools=${am_cv_prog_tar_$1-$_am_tools}
! 7207: # Do not fold the above two line into one, because Tru64 sh and
! 7208: # Solaris sh will not grok spaces in the rhs of `-'.
! 7209: for _am_tool in $_am_tools
! 7210: do
! 7211: case $_am_tool in
! 7212: gnutar)
! 7213: for _am_tar in tar gnutar gtar;
! 7214: do
! 7215: AM_RUN_LOG([$_am_tar --version]) && break
! 7216: done
! 7217: am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
! 7218: am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
! 7219: am__untar="$_am_tar -xf -"
! 7220: ;;
! 7221: plaintar)
! 7222: # Must skip GNU tar: if it does not support --format= it doesn't create
! 7223: # ustar tarball either.
! 7224: (tar --version) >/dev/null 2>&1 && continue
! 7225: am__tar='tar chf - "$$tardir"'
! 7226: am__tar_='tar chf - "$tardir"'
! 7227: am__untar='tar xf -'
! 7228: ;;
! 7229: pax)
! 7230: am__tar='pax -L -x $1 -w "$$tardir"'
! 7231: am__tar_='pax -L -x $1 -w "$tardir"'
! 7232: am__untar='pax -r'
! 7233: ;;
! 7234: cpio)
! 7235: am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
! 7236: am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
! 7237: am__untar='cpio -i -H $1 -d'
! 7238: ;;
! 7239: none)
! 7240: am__tar=false
! 7241: am__tar_=false
! 7242: am__untar=false
! 7243: ;;
! 7244: esac
! 7245:
! 7246: # If the value was cached, stop now. We just wanted to have am__tar
! 7247: # and am__untar set.
! 7248: test -n "${am_cv_prog_tar_$1}" && break
! 7249:
! 7250: # tar/untar a dummy directory, and stop if the command works
! 7251: rm -rf conftest.dir
! 7252: mkdir conftest.dir
! 7253: echo GrepMe > conftest.dir/file
! 7254: AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
! 7255: rm -rf conftest.dir
! 7256: if test -s conftest.tar; then
! 7257: AM_RUN_LOG([$am__untar <conftest.tar])
! 7258: grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
! 7259: fi
! 7260: done
! 7261: rm -rf conftest.dir
1.1 ohara 7262:
1.2 ! ohara 7263: AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
! 7264: AC_MSG_RESULT([$am_cv_prog_tar_$1])])
! 7265: AC_SUBST([am__tar])
! 7266: AC_SUBST([am__untar])
! 7267: ]) # _AM_PROG_TAR
1.1 ohara 7268:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>