[BACK]Return to configure CVS log [TXT][DIR] Up to [local] / OpenXM / src / ox_toolkit

Diff for /OpenXM/src/ox_toolkit/configure between version 1.6 and 1.8

version 1.6, 2004/02/28 23:39:38 version 1.8, 2005/03/03 04:40:51
Line 776  _ACEOF
Line 776  _ACEOF
   
   cat <<\_ACEOF    cat <<\_ACEOF
   
   Program names:
     --program-prefix=PREFIX            prepend PREFIX to installed program names
     --program-suffix=SUFFIX            append SUFFIX to installed program names
     --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
   
 X features:  X features:
   --x-includes=DIR    X include files are in DIR    --x-includes=DIR    X include files are in DIR
   --x-libraries=DIR   X library files are in DIR    --x-libraries=DIR   X library files are in DIR
Line 791  if test -n "$ac_init_help"; then
Line 796  if test -n "$ac_init_help"; then
   
   cat <<\_ACEOF    cat <<\_ACEOF
   
   Optional Features:
     --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
     --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
     --disable-dependency-tracking Speeds up one-time builds
     --enable-dependency-tracking  Do not reject slow dependency extractors
     --enable-maintainer-mode enable make rules and dependencies not useful
                             (and sometimes confusing) to the casual installer
     --enable-shared=PKGS  build shared libraries default=yes
     --enable-static=PKGS  build static libraries default=yes
     --enable-fast-install=PKGS  optimize for fast installation default=yes
     --disable-libtool-lock  avoid locking (might break parallel builds)
   
 Optional Packages:  Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]    --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)    --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
     --with-gnu-ld           assume the C compiler uses GNU ld default=no
   --with-x                use the X Window System    --with-x                use the X Window System
   --with-gmp              with the GNU MP library [no]  
   
 Some influential environment variables:  Some influential environment variables:
   CC          C compiler command    CC          C compiler command
Line 1154  ac_compiler_gnu=$ac_cv_c_compiler_gnu
Line 1171  ac_compiler_gnu=$ac_cv_c_compiler_gnu
   
   
   
   
 ac_aux_dir=  ac_aux_dir=
 for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
   if test -f $ac_dir/install-sh; then    if test -f $ac_dir/install-sh; then
Line 1179  ac_config_guess="$SHELL $ac_aux_dir/config.guess"
Line 1197  ac_config_guess="$SHELL $ac_aux_dir/config.guess"
 ac_config_sub="$SHELL $ac_aux_dir/config.sub"  ac_config_sub="$SHELL $ac_aux_dir/config.sub"
 ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.  ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
   
   # Find a good install program.  We prefer a C program (faster),
   # so one script is as good as another.  But avoid the broken or
   # incompatible versions:
   # SysV /etc/install, /usr/sbin/install
   # SunOS /usr/etc/install
   # IRIX /sbin/install
   # AIX /bin/install
   # AmigaOS /C/install, which installs bootblocks on floppy discs
   # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
   # AFS /usr/afsws/bin/install, which mishandles nonexistent args
   # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
   # ./install, which can be erroneously created by make from ./install.sh.
   echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
   echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
   if test -z "$INSTALL"; then
   if test "${ac_cv_path_install+set}" = set; then
     echo $ECHO_N "(cached) $ECHO_C" >&6
   else
     as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
   for as_dir in $PATH
   do
     IFS=$as_save_IFS
     test -z "$as_dir" && as_dir=.
     # Account for people who put trailing slashes in PATH elements.
   case $as_dir/ in
     ./ | .// | /cC/* | \
     /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
     /usr/ucb/* ) ;;
     *)
       # OSF1 and SCO ODT 3.0 have their own names for install.
       # Don't use installbsd from OSF since it installs stuff as root
       # by default.
       for ac_prog in ginstall scoinst install; do
         for ac_exec_ext in '' $ac_executable_extensions; do
           if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
             if test $ac_prog = install &&
               grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
               # AIX install.  It has an incompatible calling convention.
               :
             elif test $ac_prog = install &&
               grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
               # program-specific install script used by HP pwplus--don't use.
               :
             else
               ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
               break 3
             fi
           fi
         done
       done
       ;;
   esac
   done
   
   
   fi
     if test "${ac_cv_path_install+set}" = set; then
       INSTALL=$ac_cv_path_install
     else
       # As a last resort, use the slow shell script.  We don't cache a
       # path for INSTALL within a source directory, because that will
       # break other packages using the cache if that directory is
       # removed, or if the path is relative.
       INSTALL=$ac_install_sh
     fi
   fi
   echo "$as_me:$LINENO: result: $INSTALL" >&5
   echo "${ECHO_T}$INSTALL" >&6
   
   # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
   # It thinks the first close brace ends the variable substitution.
   test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
   
   test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
   
   test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
   
   echo "$as_me:$LINENO: checking whether build environment is sane" >&5
   echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
   # Just in case
   sleep 1
   echo timestamp > conftest.file
   # Do `set' in a subshell so we don't clobber the current shell's
   # arguments.  Must try -L first in case configure is actually a
   # symlink; some systems play weird games with the mod time of symlinks
   # (eg FreeBSD returns the mod time of the symlink's containing
   # directory).
   if (
      set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
      if test "$*" = "X"; then
         # -L didn't work.
         set X `ls -t $srcdir/configure conftest.file`
      fi
      rm -f conftest.file
      if test "$*" != "X $srcdir/configure conftest.file" \
         && test "$*" != "X conftest.file $srcdir/configure"; then
   
         # If neither matched, then we have a broken ls.  This can happen
         # if, for instance, CONFIG_SHELL is bash and it inherits a
         # broken ls alias from the environment.  This has actually
         # happened.  Such a system could not be considered "sane".
         { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
   alias in your environment" >&5
   echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
   alias in your environment" >&2;}
      { (exit 1); exit 1; }; }
      fi
   
      test "$2" = conftest.file
      )
   then
      # Ok.
      :
   else
      { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
   Check your system clock" >&5
   echo "$as_me: error: newly created file is older than distributed files!
   Check your system clock" >&2;}
      { (exit 1); exit 1; }; }
   fi
   echo "$as_me:$LINENO: result: yes" >&5
   echo "${ECHO_T}yes" >&6
   test "$program_prefix" != NONE &&
     program_transform_name="s,^,$program_prefix,;$program_transform_name"
   # Use a double $ so make ignores it.
   test "$program_suffix" != NONE &&
     program_transform_name="s,\$,$program_suffix,;$program_transform_name"
   # Double any \ or $.  echo might interpret backslashes.
   # By default was `s,x,x', remove it if useless.
   cat <<\_ACEOF >conftest.sed
   s/[\\$]/&&/g;s/;s,x,x,$//
   _ACEOF
   program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
   rm conftest.sed
   
   
   # expand $ac_aux_dir to an absolute path
   am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd`
   
   test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
   # Use eval to expand $SHELL
   if eval "$MISSING --run true"; then
     am_missing_run="$MISSING --run "
   else
     am_missing_run=
     am_backtick='`'
     { echo "$as_me:$LINENO: WARNING: ${am_backtick}missing' script is too old or missing" >&5
   echo "$as_me: WARNING: ${am_backtick}missing' script is too old or missing" >&2;}
   fi
   
   for ac_prog in gawk mawk nawk awk
   do
     # Extract the first word of "$ac_prog", so it can be a program name with args.
   set dummy $ac_prog; ac_word=$2
   echo "$as_me:$LINENO: checking for $ac_word" >&5
   echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
   if test "${ac_cv_prog_AWK+set}" = set; then
     echo $ECHO_N "(cached) $ECHO_C" >&6
   else
     if test -n "$AWK"; then
     ac_cv_prog_AWK="$AWK" # Let the user override the test.
   else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
   for as_dir in $PATH
   do
     IFS=$as_save_IFS
     test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
     if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
       ac_cv_prog_AWK="$ac_prog"
       echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
       break 2
     fi
   done
   done
   
   fi
   fi
   AWK=$ac_cv_prog_AWK
   if test -n "$AWK"; then
     echo "$as_me:$LINENO: result: $AWK" >&5
   echo "${ECHO_T}$AWK" >&6
   else
     echo "$as_me:$LINENO: result: no" >&5
   echo "${ECHO_T}no" >&6
   fi
   
     test -n "$AWK" && break
   done
   
   echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5
   echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
   set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
   if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
     echo $ECHO_N "(cached) $ECHO_C" >&6
   else
     cat >conftest.make <<\_ACEOF
   all:
           @echo 'ac_maketemp="${MAKE}"'
   _ACEOF
   # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
   eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
   if test -n "$ac_maketemp"; then
     eval ac_cv_prog_make_${ac_make}_set=yes
   else
     eval ac_cv_prog_make_${ac_make}_set=no
   fi
   rm -f conftest.make
   fi
   if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
     echo "$as_me:$LINENO: result: yes" >&5
   echo "${ECHO_T}yes" >&6
     SET_MAKE=
   else
     echo "$as_me:$LINENO: result: no" >&5
   echo "${ECHO_T}no" >&6
     SET_MAKE="MAKE=${MAKE-make}"
   fi
   
   # Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
   if test "${enable_dependency_tracking+set}" = set; then
     enableval="$enable_dependency_tracking"
   
   fi;
   if test "x$enable_dependency_tracking" != xno; then
     am_depcomp="$ac_aux_dir/depcomp"
     AMDEPBACKSLASH='\'
   fi
   
   
   if test "x$enable_dependency_tracking" != xno; then
     AMDEP_TRUE=
     AMDEP_FALSE='#'
   else
     AMDEP_TRUE='#'
     AMDEP_FALSE=
   fi
   
   
   
   
   rm -f .deps 2>/dev/null
   mkdir .deps 2>/dev/null
   if test -d .deps; then
     DEPDIR=.deps
   else
     # MS-DOS does not allow filenames that begin with a dot.
     DEPDIR=_deps
   fi
   rmdir .deps 2>/dev/null
   
   
   # test to see if srcdir already configured
   if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" &&
      test -f $srcdir/config.status; then
     { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
   echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
      { (exit 1); exit 1; }; }
   fi
   
   # Define the identity of the package.
   PACKAGE=ox_toolkit
   VERSION=20040628
   
   cat >>confdefs.h <<_ACEOF
   #define PACKAGE "$PACKAGE"
   _ACEOF
   
   
   cat >>confdefs.h <<_ACEOF
   #define VERSION "$VERSION"
   _ACEOF
   
   
   # Autoconf 2.50 wants to disallow AM_ names.  We explicitly allow
   # the ones we care about.
   
   # Autoconf 2.50 always computes EXEEXT.  However we need to be
   # compatible with 2.13, for now.  So we always define EXEEXT, but we
   # don't compute it.
   
   # Similar for OBJEXT -- only we only use OBJEXT if the user actually
   # requests that it be used.  This is a bit dumb.
   : ${OBJEXT=o}
   
   
   # Some tools Automake needs.
   
   ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal"}
   
   
   AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
   
   
   AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake"}
   
   
   AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
   
   
   MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
   
   
   AMTAR=${AMTAR-"${am_missing_run}tar"}
   
   install_sh=${install_sh-"$am_aux_dir/install-sh"}
   
   INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
   
   # We need awk for the "check" target.  The system "awk" is bad on
   # some platforms.
   
   echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
   echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
       # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
   if test "${enable_maintainer_mode+set}" = set; then
     enableval="$enable_maintainer_mode"
     USE_MAINTAINER_MODE=$enableval
   else
     USE_MAINTAINER_MODE=no
   fi;
     echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
   echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
   
   
   if test $USE_MAINTAINER_MODE = yes; then
     MAINTAINER_MODE_TRUE=
     MAINTAINER_MODE_FALSE='#'
   else
     MAINTAINER_MODE_TRUE='#'
     MAINTAINER_MODE_FALSE=
   fi
     MAINT=$MAINTAINER_MODE_TRUE
   
   
 # Make sure we can run config.sub.  # Make sure we can run config.sub.
 $ac_config_sub sun4 >/dev/null 2>&1 ||  $ac_config_sub sun4 >/dev/null 2>&1 ||
   { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5    { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
Line 2019  ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext 
Line 2372  ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext 
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'  ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu  ac_compiler_gnu=$ac_cv_c_compiler_gnu
   
   ac_config_commands="$ac_config_commands default-1"
   
   am_make=${MAKE-make}
   cat > confinc << 'END'
   doit:
           @echo done
   END
   # If we don't find an include directive, just comment out the code.
   echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
   echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
   am__include='#'
   am__quote=
   _am_result=none
   # First try GNU make style include.
   echo "include confinc" > confmf
   # We grep out `Entering directory' and `Leaving directory'
   # messages which can occur if `w' ends up in MAKEFLAGS.
   # In particular we don't look at `^make:' because GNU make might
   # be invoked under some other name (usually "gmake"), in which
   # case it prints its new name instead of `make'.
   if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
      am__include=include
      am__quote=
      _am_result=GNU
   fi
   # Now try BSD make style include.
   if test "$am__include" = "#"; then
      echo '.include "confinc"' > confmf
      if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
         am__include=.include
         am__quote='"'
         _am_result=BSD
      fi
   fi
   
   
   echo "$as_me:$LINENO: result: $_am_result" >&5
   echo "${ECHO_T}$_am_result" >&6
   rm -f confinc confmf
   
   
   depcc="$CC"   am_compiler_list=
   
   echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
   echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
   if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
     echo $ECHO_N "(cached) $ECHO_C" >&6
   else
     if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
     # We make a subdir and do the tests there.  Otherwise we can end up
     # making bogus files that we don't know about and never remove.  For
     # instance it was reported that on HP-UX the gcc test will end up
     # making a dummy file named `D' -- because `-MD' means `put the output
     # in D'.
     mkdir conftest.dir
     # Copy depcomp to subdir because otherwise we won't find it if we're
     # using a relative directory.
     cp "$am_depcomp" conftest.dir
     cd conftest.dir
   
     am_cv_CC_dependencies_compiler_type=none
     if test "$am_compiler_list" = ""; then
        am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
     fi
     for depmode in $am_compiler_list; do
       # We need to recreate these files for each test, as the compiler may
       # overwrite some of them when testing with obscure command lines.
       # This happens at least with the AIX C compiler.
       echo '#include "conftest.h"' > conftest.c
       echo 'int i;' > conftest.h
       echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
   
       case $depmode in
       nosideeffect)
         # after this tag, mechanisms are not by side-effect, so they'll
         # only be used when explicitly requested
         if test "x$enable_dependency_tracking" = xyes; then
           continue
         else
           break
         fi
         ;;
       none) break ;;
       esac
       # We check with `-c' and `-o' for the sake of the "dashmstdout"
       # mode.  It turns out that the SunPro C++ compiler does not properly
       # handle `-M -o', and we need to detect this.
       if depmode=$depmode \
          source=conftest.c object=conftest.o \
          depfile=conftest.Po tmpdepfile=conftest.TPo \
          $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
          grep conftest.h conftest.Po > /dev/null 2>&1 &&
          ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
         am_cv_CC_dependencies_compiler_type=$depmode
         break
       fi
     done
   
     cd ..
     rm -rf conftest.dir
   else
     am_cv_CC_dependencies_compiler_type=none
   fi
   
   fi
   echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
   echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
   CCDEPMODE="depmode=$am_cv_CC_dependencies_compiler_type"
   
   
 # Find a good install program.  We prefer a C program (faster),  # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or  # so one script is as good as another.  But avoid the broken or
 # incompatible versions:  # incompatible versions:
Line 2096  test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL
Line 2559  test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL
   
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'  test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
   
   # Check whether --enable-shared or --disable-shared was given.
   if test "${enable_shared+set}" = set; then
     enableval="$enable_shared"
     p=${PACKAGE-default}
   case "$enableval" in
   yes) enable_shared=yes ;;
   no) enable_shared=no ;;
   *)
     enable_shared=no
     # Look at the argument we got.  We use all the common list separators.
     IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
     for pkg in $enableval; do
       if test "X$pkg" = "X$p"; then
         enable_shared=yes
       fi
     done
     IFS="$ac_save_ifs"
     ;;
   esac
   else
     enable_shared=yes
   fi;
   # Check whether --enable-static or --disable-static was given.
   if test "${enable_static+set}" = set; then
     enableval="$enable_static"
     p=${PACKAGE-default}
   case "$enableval" in
   yes) enable_static=yes ;;
   no) enable_static=no ;;
   *)
     enable_static=no
     # Look at the argument we got.  We use all the common list separators.
     IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
     for pkg in $enableval; do
       if test "X$pkg" = "X$p"; then
         enable_static=yes
       fi
     done
     IFS="$ac_save_ifs"
     ;;
   esac
   else
     enable_static=yes
   fi;
   # Check whether --enable-fast-install or --disable-fast-install was given.
   if test "${enable_fast_install+set}" = set; then
     enableval="$enable_fast_install"
     p=${PACKAGE-default}
   case "$enableval" in
   yes) enable_fast_install=yes ;;
   no) enable_fast_install=no ;;
   *)
     enable_fast_install=no
     # Look at the argument we got.  We use all the common list separators.
     IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
     for pkg in $enableval; do
       if test "X$pkg" = "X$p"; then
         enable_fast_install=yes
       fi
     done
     IFS="$ac_save_ifs"
     ;;
   esac
   else
     enable_fast_install=yes
   fi;
 if test -n "$ac_tool_prefix"; then  if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.    # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2  set dummy ${ac_tool_prefix}ranlib; ac_word=$2
Line 2177  else
Line 2706  else
 fi  fi
   
   
   # Check whether --with-gnu-ld or --without-gnu-ld was given.
   if test "${with_gnu_ld+set}" = set; then
     withval="$with_gnu_ld"
     test "$withval" = no || with_gnu_ld=yes
   else
     with_gnu_ld=no
   fi;
   ac_prog=ld
   if test "$ac_cv_c_compiler_gnu" = yes; then
     # Check if gcc -print-prog-name=ld gives a path.
     echo "$as_me:$LINENO: checking for ld used by GCC" >&5
   echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
     ac_prog=`($CC -print-prog-name=ld) 2>&5`
     case "$ac_prog" in
       # Accept absolute paths.
       [\\/]* | [A-Za-z]:[\\/]*)
         re_direlt='/[^/][^/]*/\.\./'
         # Canonicalize the path of ld
         ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
         while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
           ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
         done
         test -z "$LD" && LD="$ac_prog"
         ;;
     "")
       # If it fails, then pretend we aren't using GCC.
       ac_prog=ld
       ;;
     *)
       # If it is relative, then search for the first ld in PATH.
       with_gnu_ld=unknown
       ;;
     esac
   elif test "$with_gnu_ld" = yes; then
     echo "$as_me:$LINENO: checking for GNU ld" >&5
   echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
   else
     echo "$as_me:$LINENO: checking for non-GNU ld" >&5
   echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
   fi
   if test "${ac_cv_path_LD+set}" = set; then
     echo $ECHO_N "(cached) $ECHO_C" >&6
   else
     if test -z "$LD"; then
     IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
     for ac_dir in $PATH; do
       test -z "$ac_dir" && ac_dir=.
       if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
         ac_cv_path_LD="$ac_dir/$ac_prog"
         # Check to see if the program is GNU ld.  I'd rather use --version,
         # but apparently some GNU ld's only accept -v.
         # Break only if it was the GNU/non-GNU ld that we prefer.
         if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
           test "$with_gnu_ld" != no && break
         else
           test "$with_gnu_ld" != yes && break
         fi
       fi
     done
     IFS="$ac_save_ifs"
   else
     ac_cv_path_LD="$LD" # Let the user override the test with a path.
   fi
   fi
   
   LD="$ac_cv_path_LD"
   if test -n "$LD"; then
     echo "$as_me:$LINENO: result: $LD" >&5
   echo "${ECHO_T}$LD" >&6
   else
     echo "$as_me:$LINENO: result: no" >&5
   echo "${ECHO_T}no" >&6
   fi
   test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
   echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
      { (exit 1); exit 1; }; }
   echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
   echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
   if test "${ac_cv_prog_gnu_ld+set}" = set; then
     echo $ECHO_N "(cached) $ECHO_C" >&6
   else
     # I'd rather use --version here, but apparently some GNU ld's only accept -v.
   if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
     ac_cv_prog_gnu_ld=yes
   else
     ac_cv_prog_gnu_ld=no
   fi
   fi
   echo "$as_me:$LINENO: result: $ac_cv_prog_gnu_ld" >&5
   echo "${ECHO_T}$ac_cv_prog_gnu_ld" >&6
   
   
   echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
   echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
   if test "${ac_cv_path_NM+set}" = set; then
     echo $ECHO_N "(cached) $ECHO_C" >&6
   else
     if test -n "$NM"; then
     # Let the user override the test.
     ac_cv_path_NM="$NM"
   else
     IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
     for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
       test -z "$ac_dir" && ac_dir=.
       if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
         # Check to see if the nm accepts a BSD-compat flag.
         # Adding the `sed 1q' prevents false positives on HP-UX, which says:
         #   nm: unknown option "B" ignored
         if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
           ac_cv_path_NM="$ac_dir/nm -B"
           break
         elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
           ac_cv_path_NM="$ac_dir/nm -p"
           break
         else
           ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
           continue # so that we can try to find one that supports BSD flags
         fi
       fi
     done
     IFS="$ac_save_ifs"
     test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
   fi
   fi
   
   NM="$ac_cv_path_NM"
   echo "$as_me:$LINENO: result: $NM" >&5
   echo "${ECHO_T}$NM" >&6
   
   echo "$as_me:$LINENO: checking whether ln -s works" >&5
   echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
   LN_S=$as_ln_s
   if test "$LN_S" = "ln -s"; then
     echo "$as_me:$LINENO: result: yes" >&5
   echo "${ECHO_T}yes" >&6
   else
     echo "$as_me:$LINENO: result: no, using $LN_S" >&5
   echo "${ECHO_T}no, using $LN_S" >&6
   fi
   
   
   
   case "$target" in
   NONE) lt_target="$host" ;;
   *) lt_target="$target" ;;
   esac
   
   # Check for any special flags to pass to ltconfig.
   libtool_flags="--cache-file=$cache_file"
   test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
   test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
   test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
   test "$ac_cv_c_compiler_gnu" = yes && libtool_flags="$libtool_flags --with-gcc"
   test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
   
   
   # Check whether --enable-libtool-lock or --disable-libtool-lock was given.
   if test "${enable_libtool_lock+set}" = set; then
     enableval="$enable_libtool_lock"
   
   fi;
   test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
   test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
   
   # Some flags need to be propagated to the compiler or linker for good
   # libtool support.
   case "$lt_target" in
   *-*-irix6*)
     # Find out which ABI we are using.
     echo '#line 2878 "configure"' > conftest.$ac_ext
     if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
     (eval $ac_compile) 2>&5
     ac_status=$?
     echo "$as_me:$LINENO: \$? = $ac_status" >&5
     (exit $ac_status); }; then
       case "`/usr/bin/file conftest.o`" in
       *32-bit*)
         LD="${LD-ld} -32"
         ;;
       *N32*)
         LD="${LD-ld} -n32"
         ;;
       *64-bit*)
         LD="${LD-ld} -64"
         ;;
       esac
     fi
     rm -rf conftest*
     ;;
   
   *-*-sco3.2v5*)
     # On SCO OpenServer 5, we need -belf to get full-featured binaries.
     SAVE_CFLAGS="$CFLAGS"
     CFLAGS="$CFLAGS -belf"
     echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
   echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
   if test "${lt_cv_cc_needs_belf+set}" = set; then
     echo $ECHO_N "(cached) $ECHO_C" >&6
   else
     cat >conftest.$ac_ext <<_ACEOF
   #line $LINENO "configure"
   #include "confdefs.h"
   
   #ifdef F77_DUMMY_MAIN
   #  ifdef __cplusplus
        extern "C"
   #  endif
      int F77_DUMMY_MAIN() { return 1; }
   #endif
   int
   main ()
   {
   
     ;
     return 0;
   }
   _ACEOF
   rm -f conftest.$ac_objext conftest$ac_exeext
   if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
     (eval $ac_link) 2>&5
     ac_status=$?
     echo "$as_me:$LINENO: \$? = $ac_status" >&5
     (exit $ac_status); } &&
            { ac_try='test -s conftest$ac_exeext'
     { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
     (eval $ac_try) 2>&5
     ac_status=$?
     echo "$as_me:$LINENO: \$? = $ac_status" >&5
     (exit $ac_status); }; }; then
     lt_cv_cc_needs_belf=yes
   else
     echo "$as_me: failed program was:" >&5
   cat conftest.$ac_ext >&5
   lt_cv_cc_needs_belf=no
   fi
   rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
   fi
   echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
   echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
     if test x"$lt_cv_cc_needs_belf" != x"yes"; then
       # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
       CFLAGS="$SAVE_CFLAGS"
     fi
     ;;
   
   
   esac
   
   
   # Save cache, so that ltconfig can load it
   cat >confcache <<\_ACEOF
   # This file is a shell script that caches the results of configure
   # tests run on this system so they can be shared between configure
   # scripts and configure runs, see configure's option --config-cache.
   # It is not useful on other systems.  If it contains results you don't
   # want to keep, you may remove or edit it.
   #
   # config.status only pays attention to the cache file if you give it
   # the --recheck option to rerun configure.
   #
   # `ac_cv_env_foo' variables (set or unset) will be overriden when
   # loading this file, other *unset* `ac_cv_foo' will be assigned the
   # following values.
   
   _ACEOF
   
   # The following way of writing the cache mishandles newlines in values,
   # but we know of no workaround that is simple, portable, and efficient.
   # So, don't put newlines in cache variables' values.
   # Ultrix sh set writes to stderr and can't be redirected directly,
   # and sets the high bit in the cache file unless we assign to the vars.
   {
     (set) 2>&1 |
       case `(ac_space=' '; set | grep ac_space) 2>&1` in
       *ac_space=\ *)
         # `set' does not quote correctly, so add quotes (double-quote
         # substitution turns \\\\ into \\, and sed turns \\ into \).
         sed -n \
           "s/'/'\\\\''/g;
             s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
         ;;
       *)
         # `set' quotes correctly as required by POSIX, so do not add quotes.
         sed -n \
           "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
         ;;
       esac;
   } |
     sed '
        t clear
        : clear
        s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
        t end
        /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
        : end' >>confcache
   if cmp -s $cache_file confcache; then :; else
     if test -w $cache_file; then
       test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
       cat confcache >$cache_file
     else
       echo "not updating unwritable cache $cache_file"
     fi
   fi
   rm -f confcache
   
   # Actually configure libtool.  ac_aux_dir is where install-sh is found.
   CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
   LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
   LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
   DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
   ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
   $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
   || { { echo "$as_me:$LINENO: error: libtool configure failed" >&5
   echo "$as_me: error: libtool configure failed" >&2;}
      { (exit 1); exit 1; }; }
   
   # Reload cache, that may have been modified by ltconfig
   if test -r "$cache_file"; then
     # Some versions of bash will fail to source /dev/null (special
     # files actually), so we avoid doing that.
     if test -f "$cache_file"; then
       { echo "$as_me:$LINENO: loading cache $cache_file" >&5
   echo "$as_me: loading cache $cache_file" >&6;}
       case $cache_file in
         [\\/]* | ?:[\\/]* ) . $cache_file;;
         *)                      . ./$cache_file;;
       esac
     fi
   else
     { echo "$as_me:$LINENO: creating cache $cache_file" >&5
   echo "$as_me: creating cache $cache_file" >&6;}
     >$cache_file
   fi
   
   
   # This can be used to rebuild libtool when needed
   LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
   
   # Always use our own libtool.
   LIBTOOL='$(SHELL) $(top_builddir)/libtool'
   
   # Redirect the config.log output again, so that the ltconfig log is not
   # clobbered by the next message.
   exec 5>>./config.log
   
 ac_ext=c  ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'  ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'  ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
Line 3550  fi
Line 4424  fi
 fi  fi
   
   
   if test "${ac_test_CFLAGS}" != set -a "${GCC}" = yes ; then
 # Check whether --with-gmp or --without-gmp was given.      CFLAGS="${CFLAGS} -finline-functions"
 if test "${with_gmp+set}" = set; then  
   withval="$with_gmp"  
   with_gmp=yes  
 else  
   with_gmp=no  
 fi;  
   
 if test ${with_gmp:=no} != no ; then  
     cat >>confdefs.h <<\_ACEOF  
 #define WITH_GMP 1  
 _ACEOF  
   
     GMPLIB="-lgmp"  
     USE_GMP='#'  
 fi  fi
   
   
   
 case "${host}" in  case "${host}" in
 i[3-6]86-*-interix*)  i[3-6]86-*-interix*)
     cat >>confdefs.h <<\_ACEOF      cat >>confdefs.h <<\_ACEOF
Line 4390  Usage: $0 [OPTIONS] [FILE]...
Line 5248  Usage: $0 [OPTIONS] [FILE]...
 Configuration files:  Configuration files:
 $config_files  $config_files
   
   Configuration commands:
   $config_commands
   
 Report bugs to <bug-autoconf@gnu.org>."  Report bugs to <bug-autoconf@gnu.org>."
 _ACEOF  _ACEOF
   
Line 4473  done
Line 5334  done
   
 _ACEOF  _ACEOF
   
   cat >>$CONFIG_STATUS <<_ACEOF
   #
   # INIT-COMMANDS section.
   #
   
   AMDEP_TRUE="$AMDEP_TRUE"
   ac_aux_dir="$ac_aux_dir"
   
   _ACEOF
   
   
   
 cat >>$CONFIG_STATUS <<\_ACEOF  cat >>$CONFIG_STATUS <<\_ACEOF
 for ac_config_target in $ac_config_targets  for ac_config_target in $ac_config_targets
 do  do
   case "$ac_config_target" in    case "$ac_config_target" in
   # Handling of arguments.    # Handling of arguments.
   "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;    "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
     "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
   *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5    *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}  echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;     { (exit 1); exit 1; }; };;
Line 4495  done
Line 5365  done
 # bizarre bug on SunOS 4.1.3.  # bizarre bug on SunOS 4.1.3.
 if $ac_need_defaults; then  if $ac_need_defaults; then
   test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files    test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
     test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
 fi  fi
   
 # Create a temporary directory, and hook for its removal unless debugging.  # Create a temporary directory, and hook for its removal unless debugging.
Line 4563  s,@ECHO_C@,$ECHO_C,;t t
Line 5434  s,@ECHO_C@,$ECHO_C,;t t
 s,@ECHO_N@,$ECHO_N,;t t  s,@ECHO_N@,$ECHO_N,;t t
 s,@ECHO_T@,$ECHO_T,;t t  s,@ECHO_T@,$ECHO_T,;t t
 s,@LIBS@,$LIBS,;t t  s,@LIBS@,$LIBS,;t t
   s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
   s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
   s,@INSTALL_DATA@,$INSTALL_DATA,;t t
   s,@PACKAGE@,$PACKAGE,;t t
   s,@VERSION@,$VERSION,;t t
   s,@EXEEXT@,$EXEEXT,;t t
   s,@OBJEXT@,$OBJEXT,;t t
   s,@ACLOCAL@,$ACLOCAL,;t t
   s,@AUTOCONF@,$AUTOCONF,;t t
   s,@AUTOMAKE@,$AUTOMAKE,;t t
   s,@AUTOHEADER@,$AUTOHEADER,;t t
   s,@MAKEINFO@,$MAKEINFO,;t t
   s,@AMTAR@,$AMTAR,;t t
   s,@install_sh@,$install_sh,;t t
   s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
   s,@AWK@,$AWK,;t t
   s,@SET_MAKE@,$SET_MAKE,;t t
   s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
   s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
   s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
   s,@DEPDIR@,$DEPDIR,;t t
   s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
   s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
   s,@MAINT@,$MAINT,;t t
 s,@build@,$build,;t t  s,@build@,$build,;t t
 s,@build_cpu@,$build_cpu,;t t  s,@build_cpu@,$build_cpu,;t t
 s,@build_vendor@,$build_vendor,;t t  s,@build_vendor@,$build_vendor,;t t
Line 4580  s,@CFLAGS@,$CFLAGS,;t t
Line 5475  s,@CFLAGS@,$CFLAGS,;t t
 s,@LDFLAGS@,$LDFLAGS,;t t  s,@LDFLAGS@,$LDFLAGS,;t t
 s,@CPPFLAGS@,$CPPFLAGS,;t t  s,@CPPFLAGS@,$CPPFLAGS,;t t
 s,@ac_ct_CC@,$ac_ct_CC,;t t  s,@ac_ct_CC@,$ac_ct_CC,;t t
 s,@EXEEXT@,$EXEEXT,;t t  s,@am__include@,$am__include,;t t
 s,@OBJEXT@,$OBJEXT,;t t  s,@am__quote@,$am__quote,;t t
 s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t  s,@CCDEPMODE@,$CCDEPMODE,;t t
 s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t  
 s,@INSTALL_DATA@,$INSTALL_DATA,;t t  
 s,@RANLIB@,$RANLIB,;t t  s,@RANLIB@,$RANLIB,;t t
 s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t  s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
   s,@LN_S@,$LN_S,;t t
   s,@LIBTOOL@,$LIBTOOL,;t t
 s,@CPP@,$CPP,;t t  s,@CPP@,$CPP,;t t
 s,@X_CFLAGS@,$X_CFLAGS,;t t  s,@X_CFLAGS@,$X_CFLAGS,;t t
 s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t  s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t
 s,@X_LIBS@,$X_LIBS,;t t  s,@X_LIBS@,$X_LIBS,;t t
 s,@X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t  s,@X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t
 s,@GMPLIB@,$GMPLIB,;t t  
 s,@USE_GMP@,$USE_GMP,;t t  
 CEOF  CEOF
   
 _ACEOF  _ACEOF
Line 4792  s,@INSTALL@,$ac_INSTALL,;t t
Line 5685  s,@INSTALL@,$ac_INSTALL,;t t
     rm -f $tmp/out      rm -f $tmp/out
   fi    fi
   
   done
   _ACEOF
   cat >>$CONFIG_STATUS <<\_ACEOF
   
   #
   # CONFIG_COMMANDS section.
   #
   for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
     ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
     ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
     ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
   $as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
            X"$ac_dest" : 'X\(//\)[^/]' \| \
            X"$ac_dest" : 'X\(//\)$' \| \
            X"$ac_dest" : 'X\(/\)' \| \
            .     : '\(.\)' 2>/dev/null ||
   echo X"$ac_dest" |
       sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
             /^X\(\/\/\)[^/].*/{ s//\1/; q; }
             /^X\(\/\/\)$/{ s//\1/; q; }
             /^X\(\/\).*/{ s//\1/; q; }
             s/.*/./; q'`
     ac_builddir=.
   
   if test "$ac_dir" != .; then
     ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
     # A "../" for each directory in $ac_dir_suffix.
     ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
   else
     ac_dir_suffix= ac_top_builddir=
   fi
   
   case $srcdir in
     .)  # No --srcdir option.  We are building in place.
       ac_srcdir=.
       if test -z "$ac_top_builddir"; then
          ac_top_srcdir=.
       else
          ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
       fi ;;
     [\\/]* | ?:[\\/]* )  # Absolute path.
       ac_srcdir=$srcdir$ac_dir_suffix;
       ac_top_srcdir=$srcdir ;;
     *) # Relative path.
       ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
       ac_top_srcdir=$ac_top_builddir$srcdir ;;
   esac
   # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
   # absolute.
   ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
   ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
   ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
   ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
   
   
     { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
   echo "$as_me: executing $ac_dest commands" >&6;}
     case $ac_dest in
       default-1 )
   test x"$AMDEP_TRUE" != x"" ||
   for mf in $CONFIG_FILES; do
     case "$mf" in
     Makefile) dirpart=.;;
     */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;;
     *) continue;;
     esac
     grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
     # Extract the definition of DEP_FILES from the Makefile without
     # running `make'.
     DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
     test -z "$DEPDIR" && continue
     # When using ansi2knr, U may be empty or an underscore; expand it
     U=`sed -n -e '/^U = / s///p' < "$mf"`
     test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
     # We invoke sed twice because it is the simplest approach to
     # changing $(DEPDIR) to its actual value in the expansion.
     for file in `sed -n -e '
       /^DEP_FILES = .*\\\\$/ {
         s/^DEP_FILES = //
         :loop
           s/\\\\$//
           p
           n
           /\\\\$/ b loop
         p
       }
       /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
          sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
       # Make sure the directory exists.
       test -f "$dirpart/$file" && continue
       fdir=`echo "$file" | sed -e 's|/[^/]*$||'`
       $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1
       # echo "creating $dirpart/$file"
       echo '# dummy' > "$dirpart/$file"
     done
   done
    ;;
     esac
 done  done
 _ACEOF  _ACEOF
   

Legend:
Removed from v.1.6  
changed lines
  Added in v.1.8

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>