===================================================================
RCS file: /home/cvs/OpenXM/src/ox_toolkit/configure,v
retrieving revision 1.11
retrieving revision 1.13
diff -u -p -r1.11 -r1.13
--- OpenXM/src/ox_toolkit/configure	2015/07/02 02:57:30	1.11
+++ OpenXM/src/ox_toolkit/configure	2015/08/26 21:00:13	1.13
@@ -1,11 +1,9 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68.
+# Generated by GNU Autoconf 2.69 for ox_toolkit 20150825.
 #
 #
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
 #
 #
 # This configure script is free software; the Free Software Foundation
@@ -134,6 +132,31 @@ export LANGUAGE
 # CDPATH.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
 if test "x$CONFIG_SHELL" = x; then
   as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
@@ -167,7 +190,8 @@ if ( set x; as_fn_ret_success y && test x = \"\$1\" );
 else
   exitcode=1; echo positional parameters were not saved.
 fi
-test x\$exitcode = x0 || exit 1"
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
   as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
   as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
   eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
@@ -220,21 +244,25 @@ IFS=$as_save_IFS
 
 
       if test "x$CONFIG_SHELL" != x; then :
-  # We cannot yet assume a decent shell, so we have to provide a
-	# neutralization value for shells without unset; and this also
-	# works around shells that cannot unset nonexistent variables.
-	# Preserve -v and -x to the replacement shell.
-	BASH_ENV=/dev/null
-	ENV=/dev/null
-	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-	export CONFIG_SHELL
-	case $- in # ((((
-	  *v*x* | *x*v* ) as_opts=-vx ;;
-	  *v* ) as_opts=-v ;;
-	  *x* ) as_opts=-x ;;
-	  * ) as_opts= ;;
-	esac
-	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
 fi
 
     if test x$as_have_required = xno; then :
@@ -336,6 +364,14 @@ $as_echo X"$as_dir" |
 
 
 } # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
 # as_fn_append VAR VALUE
 # ----------------------
 # Append the text in VALUE to the end of the definition contained in VAR. Take
@@ -457,6 +493,10 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
   chmod +x "$as_me.lineno" ||
     { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
   # original and so on.  Autoconf is especially sensitive to this).
@@ -491,16 +531,16 @@ if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -512,28 +552,8 @@ else
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -565,12 +585,12 @@ MFLAGS=
 MAKEFLAGS=
 
 # Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-PACKAGE_URL=
+PACKAGE_NAME='ox_toolkit'
+PACKAGE_TARNAME='ox_toolkit'
+PACKAGE_VERSION='20150825'
+PACKAGE_STRING='ox_toolkit 20150825'
+PACKAGE_BUGREPORT=''
+PACKAGE_URL=''
 
 ac_unique_file="mysocket.c"
 # Factoring default headers for most tests.
@@ -619,6 +639,7 @@ X_PRE_LIBS
 X_CFLAGS
 XMKMF
 CPP
+LT_SYS_LIBRARY_PATH
 OTOOL64
 OTOOL
 LIPO
@@ -643,6 +664,7 @@ LIBTOOL
 am__fastdepCC_FALSE
 am__fastdepCC_TRUE
 CCDEPMODE
+am__nodep
 AMDEPBACKSLASH
 AMDEP_FALSE
 AMDEP_TRUE
@@ -656,21 +678,13 @@ CPPFLAGS
 LDFLAGS
 CFLAGS
 CC
-target_os
-target_vendor
-target_cpu
-target
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
 MAINT
 MAINTAINER_MODE_FALSE
 MAINTAINER_MODE_TRUE
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
 am__untar
 am__tar
 AMTAR
@@ -694,6 +708,18 @@ am__isrc
 INSTALL_DATA
 INSTALL_SCRIPT
 INSTALL_PROGRAM
+target_os
+target_vendor
+target_cpu
+target
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
 target_alias
 host_alias
 build_alias
@@ -735,12 +761,14 @@ SHELL'
 ac_subst_files=''
 ac_user_opts='
 enable_option_checking
+enable_silent_rules
 enable_maintainer_mode
 enable_dependency_tracking
 enable_shared
 enable_static
 with_pic
 enable_fast_install
+with_aix_soname
 with_gnu_ld
 with_sysroot
 enable_libtool_lock
@@ -754,6 +782,7 @@ CFLAGS
 LDFLAGS
 LIBS
 CPPFLAGS
+LT_SYS_LIBRARY_PATH
 CPP
 XMKMF'
 
@@ -796,7 +825,7 @@ sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE}'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
 infodir='${datarootdir}/info'
 htmldir='${docdir}'
 dvidir='${docdir}'
@@ -1211,8 +1240,6 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used" >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
   fi
@@ -1298,7 +1325,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
+\`configure' configures ox_toolkit 20150825 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1346,7 +1373,7 @@ Fine tuning of the installation directories:
   --infodir=DIR           info documentation [DATAROOTDIR/info]
   --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
   --mandir=DIR            man documentation [DATAROOTDIR/man]
-  --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/ox_toolkit]
   --htmldir=DIR           html documentation [DOCDIR]
   --dvidir=DIR            dvi documentation [DOCDIR]
   --pdfdir=DIR            pdf documentation [DOCDIR]
@@ -1372,17 +1399,24 @@ _ACEOF
 fi
 
 if test -n "$ac_init_help"; then
-
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of ox_toolkit 20150825:";;
+   esac
   cat <<\_ACEOF
 
 Optional Features:
   --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --enable-maintainer-mode  enable make rules and dependencies not useful
-			  (and sometimes confusing) to the casual installer
-  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-silent-rules   less verbose build output (undo: "make V=1")
+  --disable-silent-rules  verbose build output (undo: "make V=0")
+  --enable-maintainer-mode
+                          enable make rules and dependencies not useful (and
+                          sometimes confusing) to the casual installer
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
   --enable-shared[=PKGS]  build shared libraries [default=yes]
   --enable-static[=PKGS]  build static libraries [default=yes]
   --enable-fast-install[=PKGS]
@@ -1394,9 +1428,12 @@ Optional Packages:
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
   --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
                           both]
+  --with-aix-soname=aix|svr4|both
+                          shared library versioning (aka "SONAME") variant to
+                          provide on AIX, [default=aix].
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
-  --with-sysroot=DIR Search for dependent libraries within DIR
-                        (or the compiler's sysroot if not specified).
+  --with-sysroot[=DIR]    Search for dependent libraries within DIR (or the
+                          compiler's sysroot if not specified).
   --with-x                use the X Window System
 
 Some influential environment variables:
@@ -1407,6 +1444,8 @@ Some influential environment variables:
   LIBS        libraries to pass to the linker, e.g. -l<library>
   CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
               you have headers in a nonstandard directory <include dir>
+  LT_SYS_LIBRARY_PATH
+              User-defined run-time library search path.
   CPP         C preprocessor
   XMKMF       Path to xmkmf, Makefile generator for X Window System
 
@@ -1476,10 +1515,10 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-configure
-generated by GNU Autoconf 2.68
+ox_toolkit configure 20150825
+generated by GNU Autoconf 2.69
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1555,7 +1594,7 @@ $as_echo "$ac_try_echo"; } >&5
 	 test ! -s conftest.err
        } && test -s conftest$ac_exeext && {
 	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
+	 test -x conftest$ac_exeext
        }; then :
   ac_retval=0
 else
@@ -1750,12 +1789,195 @@ $as_echo "$ac_res" >&6; }
   eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
 
 } # ac_fn_c_check_func
+
+# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
+# --------------------------------------------
+# Tries to find the compile-time value of EXPR in a program that includes
+# INCLUDES, setting VAR accordingly. Returns whether the value could be
+# computed
+ac_fn_c_compute_int ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if test "$cross_compiling" = yes; then
+    # Depending upon the size, compute the lo and hi bounds.
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= 0)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_lo=0 ac_mid=0
+  while :; do
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=$ac_mid; break
+else
+  as_fn_arith $ac_mid + 1 && ac_lo=$as_val
+			if test $ac_lo -le $ac_mid; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) < 0)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=-1 ac_mid=-1
+  while :; do
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_lo=$ac_mid; break
+else
+  as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
+			if test $ac_mid -le $ac_hi; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  ac_lo= ac_hi=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+  as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=$ac_mid
+else
+  as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in #((
+?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
+'') ac_retval=1 ;;
+esac
+  else
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+static long int longval () { return $2; }
+static unsigned long int ulongval () { return $2; }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+  FILE *f = fopen ("conftest.val", "w");
+  if (! f)
+    return 1;
+  if (($2) < 0)
+    {
+      long int i = longval ();
+      if (i != ($2))
+	return 1;
+      fprintf (f, "%ld", i);
+    }
+  else
+    {
+      unsigned long int i = ulongval ();
+      if (i != ($2))
+	return 1;
+      fprintf (f, "%lu", i);
+    }
+  /* Do not output a trailing newline, as this causes \r\n confusion
+     on some platforms.  */
+  return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  echo >>conftest.val; read $3 <conftest.val; ac_retval=0
+else
+  ac_retval=1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+rm -f conftest.val
+
+  fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_compute_int
 cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by $as_me, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
+It was created by ox_toolkit $as_me 20150825, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
 
@@ -2103,7 +2325,6 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
-am__api_version='1.11'
 
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
@@ -2134,6 +2355,118 @@ ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Pleas
 ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 
 
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
+$as_echo_n "checking target system type... " >&6; }
+if ${ac_cv_target+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$target_alias" = x; then
+  ac_cv_target=$ac_cv_host
+else
+  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
+$as_echo "$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
+esac
+target=$ac_cv_target
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+am__api_version='1.15'
+
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
 # incompatible versions:
@@ -2171,7 +2504,7 @@ case $as_dir/ in #((
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -2229,9 +2562,6 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
 $as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
 # Reject unsafe characters in $srcdir or the absolute working directory
 # name.  Accept space and tab only in the latter.
 am_lf='
@@ -2242,32 +2572,40 @@ case `pwd` in
 esac
 case $srcdir in
   *[\\\"\#\$\&\'\`$am_lf\ \	]*)
-    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
 esac
 
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$*" != "X $srcdir/configure conftest.file" \
-      && test "$*" != "X conftest.file $srcdir/configure"; then
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
 
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" "$LINENO" 5
-   fi
-
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
    test "$2" = conftest.file
    )
 then
@@ -2279,6 +2617,16 @@ Check your system clock" "$LINENO" 5
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
@@ -2289,8 +2637,8 @@ test "$program_suffix" != NONE &&
 ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
 program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
 
 if test x"${MISSING+set}" != xset; then
   case $am_aux_dir in
@@ -2301,15 +2649,15 @@ if test x"${MISSING+set}" != xset; then
   esac
 fi
 # Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
 else
   am_missing_run=
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi
 
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
   case $am_aux_dir in
   *\ * | *\	*)
     install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -2318,10 +2666,10 @@ if test x"${install_sh}" != xset; then
   esac
 fi
 
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
 # tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
+# will honor the 'STRIP' environment variable to overrule this program.
 if test "$cross_compiling" != no; then
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
@@ -2340,7 +2688,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2380,7 +2728,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_STRIP="strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2431,7 +2779,7 @@ do
   test -z "$as_dir" && as_dir=.
     for ac_prog in mkdir gmkdir; do
 	 for ac_exec_ext in '' $ac_executable_extensions; do
-	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
 	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
 	     'mkdir (GNU coreutils) '* | \
 	     'mkdir (coreutils) '* | \
@@ -2460,12 +2808,6 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
 $as_echo "$MKDIR_P" >&6; }
 
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
-  [\\/$]* | ?:[\\/]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
 for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
@@ -2484,7 +2826,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_AWK="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2548,6 +2890,45 @@ else
 fi
 rmdir .tst 2>/dev/null
 
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
 if test "`cd $srcdir && pwd`" != "`pwd`"; then
   # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
   # is not polluted with repeated "-I."
@@ -2569,8 +2950,8 @@ fi
 
 
 # Define the identity of the package.
- PACKAGE=ox_toolkit
- VERSION=20040628
+ PACKAGE='ox_toolkit'
+ VERSION='20150825'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2598,19 +2979,72 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility.
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
 
-AMTAR=${AMTAR-"${am_missing_run}tar"}
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
 
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
 
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar  pax cpio none'
 
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
 
 
 
 
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
+
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
     # Check whether --enable-maintainer-mode was given.
@@ -2633,117 +3067,6 @@ fi
   MAINT=$MAINTAINER_MODE_TRUE
 
 
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
-  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
-  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$host_alias" = x; then
-  ac_cv_host=$ac_cv_build
-else
-  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
-$as_echo_n "checking target system type... " >&6; }
-if ${ac_cv_target+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$target_alias" = x; then
-  ac_cv_target=$ac_cv_host
-else
-  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
-    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
-$as_echo "$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
-esac
-target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -2766,7 +3089,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2806,7 +3129,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2859,7 +3182,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2900,7 +3223,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
@@ -2958,7 +3281,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3002,7 +3325,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3448,8 +3771,7 @@ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdarg.h>
 #include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
+struct stat;
 /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
 struct buf { int x; };
 FILE * (*rcsopen) (struct buf *, struct stat *, int);
@@ -3533,6 +3855,65 @@ ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
 DEPDIR="${am__leading_dot}deps"
 
 ac_config_commands="$ac_config_commands depfiles"
@@ -3552,7 +3933,7 @@ am__quote=
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
+# Ignore all kinds of additional output from 'make'.
 case `$am_make -s -f confmf 2> /dev/null` in #(
 *the\ am__doit\ target*)
   am__include=include
@@ -3585,6 +3966,7 @@ fi
 if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
+  am__nodep='_no'
 fi
  if test "x$enable_dependency_tracking" != xno; then
   AMDEP_TRUE=
@@ -3607,8 +3989,9 @@ else
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
   # using a relative directory.
@@ -3642,16 +4025,16 @@ else
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -3660,16 +4043,16 @@ else
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
 	break
       fi
       ;;
-    msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -3732,8 +4115,8 @@ esac
 
 
 
-macro_version='2.4.2'
-macro_revision='1.3337'
+macro_version='2.4.6'
+macro_revision='2.4.6'
 
 
 
@@ -3747,7 +4130,7 @@ macro_revision='1.3337'
 
 
 
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
 
 # Backslashify metacharacters that are still active within
 # double-quoted strings.
@@ -3796,7 +4179,7 @@ func_echo_all ()
     $ECHO ""
 }
 
-case "$ECHO" in
+case $ECHO in
   printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
 $as_echo "printf" >&6; } ;;
   print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
@@ -3840,7 +4223,7 @@ do
     for ac_prog in sed gsed; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+      as_fn_executable_p "$ac_path_SED" || continue
 # Check for GNU ac_path_SED and select it if it is found.
   # Check for GNU $ac_path_SED
 case `"$ac_path_SED" --version 2>&1` in
@@ -3916,7 +4299,7 @@ do
     for ac_prog in grep ggrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+      as_fn_executable_p "$ac_path_GREP" || continue
 # Check for GNU ac_path_GREP and select it if it is found.
   # Check for GNU $ac_path_GREP
 case `"$ac_path_GREP" --version 2>&1` in
@@ -3982,7 +4365,7 @@ do
     for ac_prog in egrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+      as_fn_executable_p "$ac_path_EGREP" || continue
 # Check for GNU ac_path_EGREP and select it if it is found.
   # Check for GNU $ac_path_EGREP
 case `"$ac_path_EGREP" --version 2>&1` in
@@ -4049,7 +4432,7 @@ do
     for ac_prog in fgrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+      as_fn_executable_p "$ac_path_FGREP" || continue
 # Check for GNU ac_path_FGREP and select it if it is found.
   # Check for GNU $ac_path_FGREP
 case `"$ac_path_FGREP" --version 2>&1` in
@@ -4119,19 +4502,19 @@ test -z "$GREP" && GREP=grep
 
 # Check whether --with-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then :
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+  withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
 else
   with_gnu_ld=no
 fi
 
 ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   # Check if gcc -print-prog-name=ld gives a path.
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
 $as_echo_n "checking for ld used by $CC... " >&6; }
   case $host in
   *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
+    # gcc leaves a trailing carriage return, which upsets mingw
     ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
   *)
     ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -4145,7 +4528,7 @@ $as_echo_n "checking for ld used by $CC... " >&6; }
       while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
 	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
-      test -z "$LD" && LD="$ac_prog"
+      test -z "$LD" && LD=$ac_prog
       ;;
   "")
     # If it fails, then pretend we aren't using GCC.
@@ -4156,7 +4539,7 @@ $as_echo_n "checking for ld used by $CC... " >&6; }
     with_gnu_ld=unknown
     ;;
   esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
 $as_echo_n "checking for GNU ld... " >&6; }
 else
@@ -4167,32 +4550,32 @@ if ${lt_cv_path_LD+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
+      lt_cv_path_LD=$ac_dir/$ac_prog
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
+	test no != "$with_gnu_ld" && break
 	;;
       *)
-	test "$with_gnu_ld" != yes && break
+	test yes != "$with_gnu_ld" && break
 	;;
       esac
     fi
   done
-  IFS="$lt_save_ifs"
+  IFS=$lt_save_ifs
 else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
 fi
 fi
 
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
 if test -n "$LD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
 $as_echo "$LD" >&6; }
@@ -4235,33 +4618,38 @@ if ${lt_cv_path_NM+:} false; then :
 else
   if test -n "$NM"; then
   # Let the user override the test.
-  lt_cv_path_NM="$NM"
+  lt_cv_path_NM=$NM
 else
-  lt_nm_to_check="${ac_tool_prefix}nm"
+  lt_nm_to_check=${ac_tool_prefix}nm
   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
     lt_nm_to_check="$lt_nm_to_check nm"
   fi
   for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
     for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+      tmp_nm=$ac_dir/$lt_tmp_nm
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
 	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
 	#   nm: unknown option "B" ignored
 	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
+	# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+	case $build_os in
+	mingw*) lt_bad_file=conftest.nm/nofile ;;
+	*) lt_bad_file=/dev/null ;;
+	esac
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+	*$lt_bad_file* | *'Invalid file or object type'*)
 	  lt_cv_path_NM="$tmp_nm -B"
-	  break
+	  break 2
 	  ;;
 	*)
 	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
 	  */dev/null*)
 	    lt_cv_path_NM="$tmp_nm -p"
-	    break
+	    break 2
 	    ;;
 	  *)
 	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -4272,15 +4660,15 @@ else
 	esac
       fi
     done
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
   done
   : ${lt_cv_path_NM=no}
 fi
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+  NM=$lt_cv_path_NM
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
   if test -n "$DUMPBIN"; then :
@@ -4305,7 +4693,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -4349,7 +4737,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -4386,9 +4774,9 @@ esac
   fi
 fi
 
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
     *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
+      DUMPBIN="$DUMPBIN -symbols -headers"
       ;;
     *)
       DUMPBIN=:
@@ -4396,8 +4784,8 @@ fi
     esac
   fi
 
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
+  if test : != "$DUMPBIN"; then
+    NM=$DUMPBIN
   fi
 fi
 test -z "$NM" && NM=nm
@@ -4448,7 +4836,7 @@ if ${lt_cv_sys_max_cmd_len+:} false; then :
   $as_echo_n "(cached) " >&6
 else
     i=0
-  teststring="ABCD"
+  teststring=ABCD
 
   case $build_os in
   msdosdjgpp*)
@@ -4488,7 +4876,7 @@ else
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+  bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
     # This has been around since 386BSD, at least.  Likely further.
     if test -x /sbin/sysctl; then
       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -4538,22 +4926,23 @@ else
     ;;
   *)
     lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+       test undefined != "$lt_cv_sys_max_cmd_len"; then
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else
       # Make teststring a little bigger before we do anything with it.
       # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
+      for i in 1 2 3 4 5 6 7 8; do
         teststring=$teststring$teststring
       done
       SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+      while { test X`env echo "$teststring$teststring" 2>/dev/null` \
 	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
-	      test $i != 17 # 1/2 MB should be enough
+	      test 17 != "$i" # 1/2 MB should be enough
       do
         i=`expr $i + 1`
         teststring=$teststring$teststring
@@ -4571,7 +4960,7 @@ else
 
 fi
 
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
 $as_echo "$lt_cv_sys_max_cmd_len" >&6; }
 else
@@ -4589,30 +4978,6 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
 : ${MV="mv -f"}
 : ${RM="rm -f"}
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,b/c, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
   lt_unset=unset
 else
@@ -4735,13 +5100,13 @@ esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 case $host_os in
   cygwin* | mingw* | pw32* | cegcc*)
-    if test "$GCC" != yes; then
+    if test yes != "$GCC"; then
       reload_cmds=false
     fi
     ;;
   darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    if test yes = "$GCC"; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
     else
       reload_cmds='$LD$reload_flag -o $output$reload_objs'
     fi
@@ -4773,7 +5138,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -4813,7 +5178,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_OBJDUMP="objdump"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -4869,13 +5234,13 @@ lt_cv_deplibs_check_method='unknown'
 # Need to set the preceding variable on all platforms that support
 # interlibrary dependencies.
 # 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
 # 'pass_all' -- all dependencies passed with no checks.
 # 'test_compile' -- check by making test program.
 # 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
 
 case $host_os in
 aix[4-9]*)
@@ -4902,8 +5267,7 @@ mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+  if ( file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
@@ -4939,10 +5303,6 @@ freebsd* | dragonfly*)
   fi
   ;;
 
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
 haiku*)
   lt_cv_deplibs_check_method=pass_all
   ;;
@@ -4981,7 +5341,7 @@ irix5* | irix6* | nonstopux*)
   ;;
 
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -5003,8 +5363,8 @@ newos6*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
@@ -5057,6 +5417,9 @@ sysv4 | sysv4.3*)
 tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
+os2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 esac
 
 fi
@@ -5119,7 +5482,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5159,7 +5522,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_DLLTOOL="dlltool"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5214,8 +5577,8 @@ else
 
 case $host_os in
 cygwin* | mingw* | pw32* | cegcc*)
-  # two different shell functions defined in ltmain.sh
-  # decide which to use based on capabilities of $DLLTOOL
+  # two different shell functions defined in ltmain.sh;
+  # decide which one to use based on capabilities of $DLLTOOL
   case `$DLLTOOL --help 2>&1` in
   *--identify-strict*)
     lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
@@ -5227,7 +5590,7 @@ cygwin* | mingw* | pw32* | cegcc*)
   ;;
 *)
   # fallback: assume linklib IS sharedlib
-  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  lt_cv_sharedlib_from_linklib_cmd=$ECHO
   ;;
 esac
 
@@ -5263,7 +5626,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5307,7 +5670,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_AR="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5382,7 +5745,7 @@ if ac_fn_c_try_compile "$LINENO"; then :
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
-      if test "$ac_status" -eq 0; then
+      if test 0 -eq "$ac_status"; then
 	# Ensure the archiver fails upon bogus file names.
 	rm -f conftest.$ac_objext libconftest.a
 	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
@@ -5390,7 +5753,7 @@ if ac_fn_c_try_compile "$LINENO"; then :
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
-	if test "$ac_status" -ne 0; then
+	if test 0 -ne "$ac_status"; then
           lt_cv_ar_at_file=@
         fi
       fi
@@ -5403,7 +5766,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
 $as_echo "$lt_cv_ar_at_file" >&6; }
 
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
   archiver_list_spec=
 else
   archiver_list_spec=$lt_cv_ar_at_file
@@ -5432,7 +5795,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5472,7 +5835,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_STRIP="strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5531,7 +5894,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5571,7 +5934,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_RANLIB="ranlib"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -5620,7 +5983,7 @@ old_postuninstall_cmds=
 
 if test -n "$RANLIB"; then
   case $host_os in
-  openbsd*)
+  bitrig* | openbsd*)
     old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
     ;;
   *)
@@ -5710,7 +6073,7 @@ cygwin* | mingw* | pw32* | cegcc*)
   symcode='[ABCDGISTW]'
   ;;
 hpux*)
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     symcode='[ABCDEGRST]'
   fi
   ;;
@@ -5743,15 +6106,45 @@ case `$NM -V 2>&1` in
   symcode='[ABCDGIRSTW]' ;;
 esac
 
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  # Gets list of data symbols to import.
+  lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+  # Adjust the below global symbol transforms to fixup imported variables.
+  lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+  lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
+  lt_c_name_lib_hook="\
+  -e 's/^I .* \(lib.*\)$/  {\"\1\", (void *) 0},/p'\
+  -e 's/^I .* \(.*\)$/  {\"lib\1\", (void *) 0},/p'"
+else
+  # Disable hooks by default.
+  lt_cv_sys_global_symbol_to_import=
+  lt_cdecl_hook=
+  lt_c_name_hook=
+  lt_c_name_lib_hook=
+fi
+
 # Transform an extracted symbol line into a proper C declaration.
 # Some systems (esp. on ia64) link data and code symbols differently,
 # so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"
 
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"lib\1\", (void *) \&\1},/p'"
+
 # Handle CRLF in mingw tool chain
 opt_cr=
 case $build_os in
@@ -5768,21 +6161,24 @@ for ac_symprfx in "" "_"; do
 
   # Write the raw and C identifiers.
   if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
+    # Fake it for dumpbin and say T for any non-static function,
+    # D for any global variable and I for any imported variable.
     # Also find C++ and __fastcall symbols from MSVC++,
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK '"\
 "     {last_section=section; section=\$ 3};"\
 "     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
 "     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+"     /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+"     /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
 "     \$ 0!~/External *\|/{next};"\
 "     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
 "     {if(hide[section]) next};"\
-"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
-"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+"     {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+"     s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
 "     ' prfx=^$ac_symprfx"
   else
     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
@@ -5830,11 +6226,11 @@ _LT_EOF
 	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
 	  cat <<_LT_EOF > conftest.$ac_ext
 /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
    relocations are performed -- see ld's documentation on pseudo-relocs.  */
 # define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
 /* This system does not cope well with relocations in const data.  */
 # define LT_DLSYM_CONST
 #else
@@ -5860,7 +6256,7 @@ lt__PROGRAM__LTX_preloaded_symbols[] =
 {
   { "@PROGRAM@", (void *) 0 },
 _LT_EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  $SED "s/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
 	  cat <<\_LT_EOF >> conftest.$ac_ext
   {0, (void *) 0}
 };
@@ -5880,13 +6276,13 @@ _LT_EOF
 	  mv conftest.$ac_objext conftstm.$ac_objext
 	  lt_globsym_save_LIBS=$LIBS
 	  lt_globsym_save_CFLAGS=$CFLAGS
-	  LIBS="conftstm.$ac_objext"
+	  LIBS=conftstm.$ac_objext
 	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
 	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
   (eval $ac_link) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+  test $ac_status = 0; } && test -s conftest$ac_exeext; then
 	    pipe_works=yes
 	  fi
 	  LIBS=$lt_globsym_save_LIBS
@@ -5907,7 +6303,7 @@ _LT_EOF
   rm -rf conftest* conftst*
 
   # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
+  if test yes = "$pipe_works"; then
     break
   else
     lt_cv_sys_global_symbol_pipe=
@@ -5960,6 +6356,16 @@ fi
 
 
 
+
+
+
+
+
+
+
+
+
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
 $as_echo_n "checking for sysroot... " >&6; }
 
@@ -5972,9 +6378,9 @@ fi
 
 
 lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
  yes)
-   if test "$GCC" = yes; then
+   if test yes = "$GCC"; then
      lt_sysroot=`$CC --print-sysroot 2>/dev/null`
    fi
    ;; #(
@@ -5984,8 +6390,8 @@ case ${with_sysroot} in #(
  no|'')
    ;; #(
  *)
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
-$as_echo "${with_sysroot}" >&6; }
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
    as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
    ;;
 esac
@@ -5997,18 +6403,99 @@ $as_echo "${lt_sysroot:-no}" >&6; }
 
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+  ac_path_lt_DD_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in dd; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+      $ac_path_lt_DD_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_lt_DD"; then
+    :
+  fi
+else
+  ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
 # Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then :
   enableval=$enable_libtool_lock;
 fi
 
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
 case $host in
 ia64-*-hpux*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set mode
+  # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
@@ -6017,24 +6504,25 @@ ia64-*-hpux*)
   test $ac_status = 0; }; then
     case `/usr/bin/file conftest.$ac_objext` in
       *ELF-32*)
-	HPUX_IA64_MODE="32"
+	HPUX_IA64_MODE=32
 	;;
       *ELF-64*)
-	HPUX_IA64_MODE="64"
+	HPUX_IA64_MODE=64
 	;;
     esac
   fi
   rm -rf conftest*
   ;;
 *-*-irix6*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
   echo '#line '$LINENO' "configure"' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
+    if test yes = "$lt_cv_prog_gnu_ld"; then
       case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -melf32bsmip"
@@ -6063,9 +6551,50 @@ ia64-*-hpux*)
   rm -rf conftest*
   ;;
 
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    emul=elf
+    case `/usr/bin/file conftest.$ac_objext` in
+      *32-bit*)
+	emul="${emul}32"
+	;;
+      *64-bit*)
+	emul="${emul}64"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *MSB*)
+	emul="${emul}btsmip"
+	;;
+      *LSB*)
+	emul="${emul}ltsmip"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *N32*)
+	emul="${emul}n32"
+	;;
+    esac
+    LD="${LD-ld} -m $emul"
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
 s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.  Note that the listed cases only cover the
+  # situations where additional linker options are needed (such as when
+  # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+  # vice versa); the common cases where no linker options are needed do
+  # not appear in the list.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
@@ -6079,9 +6608,19 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
+		LD="${LD-ld} -m elf_i386"
+		;;
+	    esac
 	    ;;
-	  ppc64-*linux*|powerpc64-*linux*)
+	  powerpc64le-*linux*)
+	    LD="${LD-ld} -m elf32lppclinux"
+	    ;;
+	  powerpc64-*linux*)
 	    LD="${LD-ld} -m elf32ppclinux"
 	    ;;
 	  s390x-*linux*)
@@ -6100,7 +6639,10 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
 	  x86_64-*linux*)
 	    LD="${LD-ld} -m elf_x86_64"
 	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
+	  powerpcle-*linux*)
+	    LD="${LD-ld} -m elf64lppc"
+	    ;;
+	  powerpc-*linux*)
 	    LD="${LD-ld} -m elf64ppc"
 	    ;;
 	  s390*-*linux*|s390*-*tpf*)
@@ -6118,7 +6660,7 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
 
 *-*-sco3.2v5*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
+  SAVE_CFLAGS=$CFLAGS
   CFLAGS="$CFLAGS -belf"
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
 $as_echo_n "checking whether the C compiler needs -belf... " >&6; }
@@ -6158,13 +6700,14 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
 $as_echo "$lt_cv_cc_needs_belf" >&6; }
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+  if test yes != "$lt_cv_cc_needs_belf"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
+    CFLAGS=$SAVE_CFLAGS
   fi
   ;;
 *-*solaris*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
@@ -6176,7 +6719,7 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; }
       case $lt_cv_prog_gnu_ld in
       yes*)
         case $host in
-        i?86-*-solaris*)
+        i?86-*-solaris*|x86_64-*-solaris*)
           LD="${LD-ld} -m elf_x86_64"
           ;;
         sparc*-*-solaris*)
@@ -6185,7 +6728,7 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; }
         esac
         # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
         if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
-          LD="${LD-ld}_sol2"
+          LD=${LD-ld}_sol2
         fi
         ;;
       *)
@@ -6201,7 +6744,7 @@ $as_echo "$lt_cv_cc_needs_belf" >&6; }
   ;;
 esac
 
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
 
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
@@ -6220,7 +6763,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6260,7 +6803,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6312,7 +6855,7 @@ else
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
 $as_echo "$lt_cv_path_mainfest_tool" >&6; }
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
   MANIFEST_TOOL=:
 fi
 
@@ -6340,7 +6883,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6380,7 +6923,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6432,7 +6975,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6472,7 +7015,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_NMEDIT="nmedit"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6524,7 +7067,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6564,7 +7107,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_LIPO="lipo"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6616,7 +7159,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6656,7 +7199,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_OTOOL="otool"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6708,7 +7251,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6748,7 +7291,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_OTOOL64="otool64"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6815,7 +7358,7 @@ if ${lt_cv_apple_cc_single_mod+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
+      if test -z "$LT_MULTI_MODULE"; then
 	# By default we will add the -single_module flag. You can override
 	# by either setting the environment variable LT_MULTI_MODULE
 	# non-empty at configure time, or by adding -multi_module to the
@@ -6833,7 +7376,7 @@ else
 	  cat conftest.err >&5
 	# Otherwise, if the output was created with a 0 exit code from
 	# the compiler, it worked.
-	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
 	  lt_cv_apple_cc_single_mod=yes
 	else
 	  cat conftest.err >&5
@@ -6872,7 +7415,7 @@ else
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-	LDFLAGS="$save_LDFLAGS"
+	LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
@@ -6901,7 +7444,7 @@ _LT_EOF
       _lt_result=$?
       if test -s conftest.err && $GREP force_load conftest.err; then
 	cat conftest.err >&5
-      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+      elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
 	lt_cv_ld_force_load=yes
       else
 	cat conftest.err >&5
@@ -6914,32 +7457,32 @@ fi
 $as_echo "$lt_cv_ld_force_load" >&6; }
     case $host_os in
     rhapsody* | darwin1.[012])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+      _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
     darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+      _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
     darwin*) # darwin 5.x on
       # if running on 10.5 or later, the deployment target defaults
       # to the OS version, if on x86, and 10.4, the deployment
       # target defaults to 10.4. Don't you love it?
       case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
 	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-	10.[012]*)
-	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+	10.[012][,.]*)
+	  _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
 	10.*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+    if test yes = "$lt_cv_apple_cc_single_mod"; then
       _lt_dar_single_mod='$single_module'
     fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    if test yes = "$lt_cv_ld_exported_symbols_list"; then
+      _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
     else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
     fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+    if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -6947,6 +7490,41 @@ $as_echo "$lt_cv_ld_force_load" >&6; }
     ;;
   esac
 
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -7250,14 +7828,14 @@ if test "${enable_shared+set}" = set; then :
     *)
       enable_shared=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_shared=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -7281,14 +7859,14 @@ if test "${enable_static+set}" = set; then :
     *)
      enable_static=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_static=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -7312,14 +7890,14 @@ if test "${with_pic+set}" = set; then :
     *)
       pic_mode=default
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for lt_pkg in $withval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$lt_pkg" = "X$lt_p"; then
 	  pic_mode=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -7327,14 +7905,12 @@ else
 fi
 
 
-test -z "$pic_mode" && pic_mode=default
 
 
 
 
 
 
-
   # Check whether --enable-fast-install was given.
 if test "${enable_fast_install+set}" = set; then :
   enableval=$enable_fast_install; p=${PACKAGE-default}
@@ -7344,14 +7920,14 @@ if test "${enable_fast_install+set}" = set; then :
     *)
       enable_fast_install=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_fast_install=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -7365,11 +7941,63 @@ fi
 
 
 
+  shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
 
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+  withval=$with_aix_soname; case $withval in
+    aix|svr4|both)
+      ;;
+    *)
+      as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+      ;;
+    esac
+    lt_cv_with_aix_soname=$with_aix_soname
+else
+  if ${lt_cv_with_aix_soname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_with_aix_soname=aix
+fi
 
+    with_aix_soname=$lt_cv_with_aix_soname
+fi
 
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+  if test aix != "$with_aix_soname"; then
+    # For the AIX way of multilib, we name the shared archive member
+    # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+    # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+    # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+    # the AIX toolchain works better with OBJECT_MODE set (default 32).
+    if test 64 = "${OBJECT_MODE-32}"; then
+      shared_archive_member_spec=shr_64
+    else
+      shared_archive_member_spec=shr
+    fi
+  fi
+  ;;
+*)
+  with_aix_soname=aix
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -7418,7 +8046,7 @@ test -z "$LN_S" && LN_S="ln -s"
 
 
 
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
    setopt NO_GLOB_SUBST
 fi
 
@@ -7457,7 +8085,7 @@ aix3*)
   # AIX sometimes has problems with the GCC collect2 program.  For some
   # reason, if we set the COLLECT_NAMES environment variable, the problems
   # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
+  if test set != "${COLLECT_NAMES+set}"; then
     COLLECT_NAMES=
     export COLLECT_NAMES
   fi
@@ -7468,14 +8096,14 @@ esac
 ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
 
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
 
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
 
 # Set sane defaults for various variables
 test -z "$CC" && CC=cc
@@ -7484,15 +8112,8 @@ test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
 test -z "$LD" && LD=ld
 test -z "$ac_objext" && ac_objext=o
 
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
 
 
 # Only perform the check for file, if the check method requires it
@@ -7507,22 +8128,22 @@ if ${lt_cv_path_MAGIC_CMD+:} false; then :
 else
   case $MAGIC_CMD in
 [\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
   ;;
 *)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
   for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+    if test -f "$ac_dir/${ac_tool_prefix}file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
 	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
@@ -7545,13 +8166,13 @@ _LT_EOF
       break
     fi
   done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
   ;;
 esac
 fi
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 if test -n "$MAGIC_CMD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
 $as_echo "$MAGIC_CMD" >&6; }
@@ -7573,22 +8194,22 @@ if ${lt_cv_path_MAGIC_CMD+:} false; then :
 else
   case $MAGIC_CMD in
 [\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
   ;;
 *)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
   for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+    if test -f "$ac_dir/file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"file"
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
 	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
@@ -7611,13 +8232,13 @@ _LT_EOF
       break
     fi
   done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
   ;;
 esac
 fi
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 if test -n "$MAGIC_CMD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
 $as_echo "$MAGIC_CMD" >&6; }
@@ -7638,7 +8259,7 @@ esac
 
 # Use C for the default configuration in the libtool script
 
-lt_save_CC="$CC"
+lt_save_CC=$CC
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -7696,7 +8317,7 @@ if test -n "$compiler"; then
 
 lt_prog_compiler_no_builtin_flag=
 
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   case $cc_basename in
   nvcc*)
     lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
@@ -7712,7 +8333,7 @@ else
   lt_cv_prog_compiler_rtti_exceptions=no
    ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   lt_compiler_flag="-fno-rtti -fno-exceptions"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -7742,7 +8363,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
     lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
 else
     :
@@ -7760,17 +8381,18 @@ lt_prog_compiler_pic=
 lt_prog_compiler_static=
 
 
-  if test "$GCC" = yes; then
+  if test yes = "$GCC"; then
     lt_prog_compiler_wl='-Wl,'
     lt_prog_compiler_static='-static'
 
     case $host_os in
       aix*)
       # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	lt_prog_compiler_static='-Bstatic'
       fi
+      lt_prog_compiler_pic='-fPIC'
       ;;
 
     amigaos*)
@@ -7781,8 +8403,8 @@ lt_prog_compiler_static=
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
             lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
@@ -7798,6 +8420,11 @@ lt_prog_compiler_static=
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
       lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
       ;;
 
     darwin* | rhapsody*)
@@ -7868,7 +8495,7 @@ lt_prog_compiler_static=
     case $host_os in
     aix*)
       lt_prog_compiler_wl='-Wl,'
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	lt_prog_compiler_static='-Bstatic'
       else
@@ -7876,10 +8503,29 @@ lt_prog_compiler_static=
       fi
       ;;
 
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      case $cc_basename in
+      nagfor*)
+        # NAG Fortran compiler
+        lt_prog_compiler_wl='-Wl,-Wl,,'
+        lt_prog_compiler_pic='-PIC'
+        lt_prog_compiler_static='-Bstatic'
+        ;;
+      esac
+      ;;
+
     mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
       ;;
 
     hpux9* | hpux10* | hpux11*)
@@ -7895,7 +8541,7 @@ lt_prog_compiler_static=
 	;;
       esac
       # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      lt_prog_compiler_static='$wl-a ${wl}archive'
       ;;
 
     irix5* | irix6* | nonstopux*)
@@ -7904,9 +8550,9 @@ lt_prog_compiler_static=
       lt_prog_compiler_static='-non_shared'
       ;;
 
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
       case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
+      # old Intel for x86_64, which still supported -KPIC.
       ecc*)
 	lt_prog_compiler_wl='-Wl,'
 	lt_prog_compiler_pic='-KPIC'
@@ -7931,6 +8577,12 @@ lt_prog_compiler_static=
 	lt_prog_compiler_pic='-PIC'
 	lt_prog_compiler_static='-Bstatic'
 	;;
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
@@ -8028,7 +8680,7 @@ lt_prog_compiler_static=
       ;;
 
     sysv4*MP*)
-      if test -d /usr/nec ;then
+      if test -d /usr/nec; then
 	lt_prog_compiler_pic='-Kconform_pic'
 	lt_prog_compiler_static='-Bstatic'
       fi
@@ -8057,7 +8709,7 @@ lt_prog_compiler_static=
   fi
 
 case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
+  # For platforms that do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic=
     ;;
@@ -8089,7 +8741,7 @@ else
   lt_cv_prog_compiler_pic_works=no
    ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -8119,7 +8771,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
 
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
     case $lt_prog_compiler_pic in
      "" | " "*) ;;
      *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
@@ -8151,7 +8803,7 @@ if ${lt_cv_prog_compiler_static_works+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_static_works=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -8170,13 +8822,13 @@ else
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
 $as_echo "$lt_cv_prog_compiler_static_works" >&6; }
 
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works"; then
     :
 else
     lt_prog_compiler_static=
@@ -8296,8 +8948,8 @@ $as_echo "$lt_cv_prog_compiler_c_o" >&6; }
 
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
   # do not overwrite the value of need_locks provided by the user
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
 $as_echo_n "checking if we can lock with hard links... " >&6; }
@@ -8309,9 +8961,9 @@ $as_echo_n "checking if we can lock with hard links...
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
 $as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+  if test no = "$hard_links"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
     need_locks=warn
   fi
 else
@@ -8354,9 +9006,9 @@ $as_echo_n "checking whether the $compiler linker ($LD
   # included in the symbol list
   include_expsyms=
   # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
+  # it will be wrapped by ' (' and ')$', so one must not match beginning or
+  # end of line.  Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+  # as well as any symbol that contains 'd'.
   exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
@@ -8371,7 +9023,7 @@ $as_echo_n "checking whether the $compiler linker ($LD
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
-    if test "$GCC" != yes; then
+    if test yes != "$GCC"; then
       with_gnu_ld=no
     fi
     ;;
@@ -8379,7 +9031,7 @@ $as_echo_n "checking whether the $compiler linker ($LD
     # we just hope/assume this is gcc and not c89 (= MSVC++)
     with_gnu_ld=yes
     ;;
-  openbsd*)
+  openbsd* | bitrig*)
     with_gnu_ld=no
     ;;
   esac
@@ -8389,7 +9041,7 @@ $as_echo_n "checking whether the $compiler linker ($LD
   # On some targets, GNU ld is compatible enough with the native linker
   # that we're better off using the native interface for both.
   lt_use_gnu_ld_interface=no
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     case $host_os in
       aix*)
 	# The AIX port of GNU ld has always aspired to compatibility
@@ -8411,24 +9063,24 @@ $as_echo_n "checking whether the $compiler linker ($LD
     esac
   fi
 
-  if test "$lt_use_gnu_ld_interface" = yes; then
+  if test yes = "$lt_use_gnu_ld_interface"; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
+    wlarc='$wl'
 
     # Set some defaults for GNU ld with shared library support. These
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
+    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+    export_dynamic_flag_spec='$wl--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
     if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
     else
       whole_archive_flag_spec=
     fi
     supports_anon_versioning=no
-    case `$LD -v 2>&1` in
+    case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
       *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -8441,7 +9093,7 @@ $as_echo_n "checking whether the $compiler linker ($LD
     case $host_os in
     aix[3-9]*)
       # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
+      if test ia64 != "$host_cpu"; then
 	ld_shlibs=no
 	cat <<_LT_EOF 1>&2
 
@@ -8460,7 +9112,7 @@ _LT_EOF
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             archive_expsym_cmds=''
         ;;
       m68k)
@@ -8476,7 +9128,7 @@ _LT_EOF
 	allow_undefined_flag=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -8486,7 +9138,7 @@ _LT_EOF
       # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
       # as there is no search path for DLLs.
       hardcode_libdir_flag_spec='-L$libdir'
-      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      export_dynamic_flag_spec='$wl--export-all-symbols'
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
@@ -8494,61 +9146,89 @@ _LT_EOF
       exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file, use it as
+	# is; otherwise, prepend EXPORTS...
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+          cp $export_symbols $output_objdir/$soname.def;
+        else
+          echo EXPORTS > $output_objdir/$soname.def;
+          cat $export_symbols >> $output_objdir/$soname.def;
+        fi~
+        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
 	ld_shlibs=no
       fi
       ;;
 
     haiku*)
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       link_all_deplibs=yes
       ;;
 
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
+      ;;
+
     interix[3-9]*)
       hardcode_direct=no
       hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
+      hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+      export_dynamic_flag_spec='$wl-E'
       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
       # Instead, shared libraries are loaded at an image base (0x10000000 by
       # default) and relocated if they conflict, which is a slow very memory
       # consuming and fragmenting process.  To avoid this, we pick a random,
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
       tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
+      if test linux-dietlibc = "$host_os"; then
 	case $cc_basename in
 	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
 	esac
       fi
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-	 && test "$tmp_diet" = no
+	 && test no = "$tmp_diet"
       then
 	tmp_addflag=' $pic_flag'
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95* | pgfortran*)
 					# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -8559,42 +9239,47 @@ _LT_EOF
 	lf95*)				# Lahey Fortran 8.1
 	  whole_archive_flag_spec=
 	  tmp_sharedflag='--shared' ;;
+        nagfor*)                        # NAGFOR 5.3
+          tmp_sharedflag='-Wl,-shared' ;;
 	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
 	nvcc*)	# Cuda Compiler Driver 2.2
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  compiler_needs_object=yes
 	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  compiler_needs_object=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
 	  tmp_sharedflag='-G' ;;
 	esac
-	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
 
-        if test "x$supports_anon_versioning" = xyes; then
+        if test yes = "$supports_anon_versioning"; then
           archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	    echo "local: *; };" >> $output_objdir/$libname.ver~
-	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            echo "local: *; };" >> $output_objdir/$libname.ver~
+            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
         fi
 
 	case $cc_basename in
+	tcc*)
+	  export_dynamic_flag_spec='-rdynamic'
+	  ;;
 	xlf* | bgf* | bgxlf* | mpixlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
-	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
 	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
-	  if test "x$supports_anon_versioning" = xyes; then
+	  if test yes = "$supports_anon_versioning"; then
 	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              echo "local: *; };" >> $output_objdir/$libname.ver~
+              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -8608,8 +9293,8 @@ _LT_EOF
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
@@ -8627,8 +9312,8 @@ _LT_EOF
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -8640,7 +9325,7 @@ _LT_EOF
 	ld_shlibs=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
 *** reliably create shared libraries on SCO systems.  Therefore, libtool
 *** is disabling shared libraries support.  We urge you to upgrade GNU
 *** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
@@ -8655,9 +9340,9 @@ _LT_EOF
 	  # DT_RUNPATH tag from executables and libraries.  But doing so
 	  # requires that you compile everything twice, which is a pain.
 	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
 	    ld_shlibs=no
 	  fi
@@ -8674,15 +9359,15 @@ _LT_EOF
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
       ;;
     esac
 
-    if test "$ld_shlibs" = no; then
+    if test no = "$ld_shlibs"; then
       runpath_var=
       hardcode_libdir_flag_spec=
       export_dynamic_flag_spec=
@@ -8698,7 +9383,7 @@ _LT_EOF
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       hardcode_minus_L=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+      if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	hardcode_direct=unsupported
@@ -8706,34 +9391,57 @@ _LT_EOF
       ;;
 
     aix[4-9]*)
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
 	aix_use_runtimelinking=no
 	exp_sym_flag='-Bexport'
-	no_entry_flag=""
+	no_entry_flag=
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
+	# -C means demangle to GNU nm, but means don't demangle to AIX nm.
+	# Without the "-l" option, or with the "-B" option, AIX nm treats
+	# weak defined symbols like other global defined symbols, whereas
+	# GNU nm marks them as "W".
+	# While the 'weak' keyword is ignored in the Export File, we need
+	# it in the Import File for the 'aix-soname' feature, so we have
+	# to replace the "-B" option with "-P" for AIX nm.
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
 	else
-	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
+	# have runtime linking enabled, and use it for executables.
+	# For shared libraries, we enable/disable runtime linking
+	# depending on the kind of the shared library created -
+	# when "with_aix_soname,aix_use_runtimelinking" is:
+	# "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "aix,yes"  lib.so          shared, rtl:yes, for executables
+	#            lib.a           static archive
+	# "both,no"  lib.so.V(shr.o) shared, rtl:yes
+	#            lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a(lib.so.V) shared, rtl:no
+	# "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a           static archive
 	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 	  for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	  if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
 	    aix_use_runtimelinking=yes
 	    break
 	  fi
 	  done
+	  if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	    # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	    # so we don't have lib.a shared libs to link our executables.
+	    # We have to force runtime linking in this case.
+	    aix_use_runtimelinking=yes
+	    LDFLAGS="$LDFLAGS -Wl,-brtl"
+	  fi
 	  ;;
 	esac
 
@@ -8752,13 +9460,21 @@ _LT_EOF
       hardcode_direct_absolute=yes
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
-      file_list_spec='${wl}-f,'
+      file_list_spec='$wl-f,'
+      case $with_aix_soname,$aix_use_runtimelinking in
+      aix,*) ;; # traditional, no import file
+      svr4,* | *,yes) # use import file
+	# The Import File defines what to hardcode.
+	hardcode_direct=no
+	hardcode_direct_absolute=no
+	;;
+      esac
 
-      if test "$GCC" = yes; then
+      if test yes = "$GCC"; then
 	case $host_os in aix4.[012]|aix4.[012].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
+	  collect2name=`$CC -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
@@ -8777,35 +9493,42 @@ _LT_EOF
 	  ;;
 	esac
 	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
+	if test yes = "$aix_use_runtimelinking"; then
+	  shared_flag="$shared_flag "'$wl-G'
 	fi
+	# Need to ensure runtime linking is disabled for the traditional
+	# shared library, or the linker may eventually find shared libraries
+	# /with/ Import File - we do not want to mix them.
+	shared_flag_aix='-shared'
+	shared_flag_svr4='-shared $wl-G'
       else
 	# not using gcc
-	if test "$host_cpu" = ia64; then
+	if test ia64 = "$host_cpu"; then
 	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag='$wl-G'
 	  else
-	    shared_flag='${wl}-bM:SRE'
+	    shared_flag='$wl-bM:SRE'
 	  fi
+	  shared_flag_aix='$wl-bM:SRE'
+	  shared_flag_svr4='$wl-G'
 	fi
       fi
 
-      export_dynamic_flag_spec='${wl}-bexpall'
+      export_dynamic_flag_spec='$wl-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
       always_export_symbols=yes
-      if test "$aix_use_runtimelinking" = yes; then
+      if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
 	allow_undefined_flag='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
-        if test "${lt_cv_aix_libpath+set}" = set; then
+        if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath_+:} false; then :
@@ -8840,7 +9563,7 @@ fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath_"; then
-    lt_cv_aix_libpath_="/usr/lib:/lib"
+    lt_cv_aix_libpath_=/usr/lib:/lib
   fi
 
 fi
@@ -8848,17 +9571,17 @@ fi
   aix_libpath=$lt_cv_aix_libpath_
 fi
 
-        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	if test ia64 = "$host_cpu"; then
+	  hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag="-z nodefs"
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
-	 if test "${lt_cv_aix_libpath+set}" = set; then
+	 if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath_+:} false; then :
@@ -8893,7 +9616,7 @@ fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath_"; then
-    lt_cv_aix_libpath_="/usr/lib:/lib"
+    lt_cv_aix_libpath_=/usr/lib:/lib
   fi
 
 fi
@@ -8901,21 +9624,33 @@ fi
   aix_libpath=$lt_cv_aix_libpath_
 fi
 
-	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	 hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag=' ${wl}-bernotok'
-	  allow_undefined_flag=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
+	  no_undefined_flag=' $wl-bernotok'
+	  allow_undefined_flag=' $wl-berok'
+	  if test yes = "$with_gnu_ld"; then
 	    # We only use this code for GNU lds that support --whole-archive.
-	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
 	  else
 	    # Exported symbols can be pulled into shared objects from archives
 	    whole_archive_flag_spec='$convenience'
 	  fi
 	  archive_cmds_need_lc=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	  # -brtl affects multiple linker settings, -berok does not and is overridden later
+	  compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+	  if test svr4 != "$with_aix_soname"; then
+	    # This is similar to how AIX traditionally builds its shared libraries.
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	  fi
+	  if test aix != "$with_aix_soname"; then
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	  else
+	    # used by -dlpreopen to get the symbols
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	  fi
+	  archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
 	fi
       fi
       ;;
@@ -8924,7 +9659,7 @@ fi
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             archive_expsym_cmds=''
         ;;
       m68k)
@@ -8954,16 +9689,17 @@ fi
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
-	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	  else
-	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	  fi~
-	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	  linknames='
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+            cp "$export_symbols" "$output_objdir/$soname.def";
+            echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+          else
+            $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+          fi~
+          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+          linknames='
 	# The linker will not automatically build a static lib if we build a DLL.
 	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
 	enable_shared_with_static_runtimes=yes
@@ -8972,18 +9708,18 @@ fi
 	# Don't use ranlib
 	old_postinstall_cmds='chmod 644 $oldlib'
 	postlink_cmds='lt_outputfile="@OUTPUT@"~
-	  lt_tool_outputfile="@TOOL_OUTPUT@"~
-	  case $lt_outputfile in
-	    *.exe|*.EXE) ;;
-	    *)
-	      lt_outputfile="$lt_outputfile.exe"
-	      lt_tool_outputfile="$lt_tool_outputfile.exe"
-	      ;;
-	  esac~
-	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	    $RM "$lt_outputfile.manifest";
-	  fi'
+          lt_tool_outputfile="@TOOL_OUTPUT@"~
+          case $lt_outputfile in
+            *.exe|*.EXE) ;;
+            *)
+              lt_outputfile=$lt_outputfile.exe
+              lt_tool_outputfile=$lt_tool_outputfile.exe
+              ;;
+          esac~
+          if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+            $RM "$lt_outputfile.manifest";
+          fi'
 	;;
       *)
 	# Assume MSVC wrapper
@@ -8992,7 +9728,7 @@ fi
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
 	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
 	# The linker will automatically build a .lib file if we build a DLL.
@@ -9011,24 +9747,24 @@ fi
   hardcode_direct=no
   hardcode_automatic=yes
   hardcode_shlibpath_var=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
 
   else
     whole_archive_flag_spec=''
   fi
   link_all_deplibs=yes
-  allow_undefined_flag="$_lt_dar_allow_undefined"
+  allow_undefined_flag=$_lt_dar_allow_undefined
   case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
      *) _lt_dar_can_shared=$GCC ;;
   esac
-  if test "$_lt_dar_can_shared" = "yes"; then
+  if test yes = "$_lt_dar_can_shared"; then
     output_verbose_link_cmd=func_echo_all
-    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
 
   else
   ld_shlibs=no
@@ -9070,33 +9806,33 @@ fi
       ;;
 
     hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      if test yes = "$GCC"; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       else
-	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       fi
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl+b $wl$libdir'
       hardcode_libdir_separator=:
       hardcode_direct=yes
 
       # hardcode_minus_L: Not really in the search PATH,
       # but as the default location of the library.
       hardcode_minus_L=yes
-      export_dynamic_flag_spec='${wl}-E'
+      export_dynamic_flag_spec='$wl-E'
       ;;
 
     hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
 	hardcode_libdir_separator=:
 	hardcode_direct=yes
 	hardcode_direct_absolute=yes
-	export_dynamic_flag_spec='${wl}-E'
+	export_dynamic_flag_spec='$wl-E'
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
 	hardcode_minus_L=yes
@@ -9104,25 +9840,25 @@ fi
       ;;
 
     hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test yes,no = "$GCC,$with_gnu_ld"; then
 	case $host_cpu in
 	hppa*64*)
-	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
 	case $host_cpu in
 	hppa*64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
 
@@ -9134,7 +9870,7 @@ if ${lt_cv_prog_compiler__b+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler__b=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS -b"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -9153,14 +9889,14 @@ else
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
 $as_echo "$lt_cv_prog_compiler__b" >&6; }
 
-if test x"$lt_cv_prog_compiler__b" = xyes; then
-    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+if test yes = "$lt_cv_prog_compiler__b"; then
+    archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 else
     archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
 fi
@@ -9168,8 +9904,8 @@ fi
 	  ;;
 	esac
       fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
 	hardcode_libdir_separator=:
 
 	case $host_cpu in
@@ -9180,7 +9916,7 @@ fi
 	*)
 	  hardcode_direct=yes
 	  hardcode_direct_absolute=yes
-	  export_dynamic_flag_spec='${wl}-E'
+	  export_dynamic_flag_spec='$wl-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
 	  # but as the default location of the library.
@@ -9191,8 +9927,8 @@ fi
       ;;
 
     irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
@@ -9202,8 +9938,8 @@ $as_echo_n "checking whether the $host_os linker accep
 if ${lt_cv_irix_exported_symbol+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  save_LDFLAGS="$LDFLAGS"
-	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+  save_LDFLAGS=$LDFLAGS
+	   LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
 	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 int foo (void) { return 0; }
@@ -9215,24 +9951,34 @@ else
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-           LDFLAGS="$save_LDFLAGS"
+           LDFLAGS=$save_LDFLAGS
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
 $as_echo "$lt_cv_irix_exported_symbol" >&6; }
-	if test "$lt_cv_irix_exported_symbol" = yes; then
-          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	if test yes = "$lt_cv_irix_exported_symbol"; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
 	fi
       else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
       fi
       archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       hardcode_libdir_separator=:
       inherit_rpath=yes
       link_all_deplibs=yes
       ;;
 
+    linux*)
+      case $cc_basename in
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	ld_shlibs=yes
+	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      esac
+      ;;
+
     netbsd*)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
@@ -9247,7 +9993,7 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
     newsos6)
       archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
       hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       hardcode_libdir_separator=:
       hardcode_shlibpath_var=no
       ;;
@@ -9255,27 +10001,19 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
     *nto* | *qnx*)
       ;;
 
-    openbsd*)
+    openbsd* | bitrig*)
       if test -f /usr/libexec/ld.so; then
 	hardcode_direct=yes
 	hardcode_shlibpath_var=no
 	hardcode_direct_absolute=yes
-	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
 	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec='${wl}-E'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+	  export_dynamic_flag_spec='$wl-E'
 	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	     ;;
-	  esac
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
 	fi
       else
 	ld_shlibs=no
@@ -9286,33 +10024,53 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       hardcode_libdir_flag_spec='-L$libdir'
       hardcode_minus_L=yes
       allow_undefined_flag=unsupported
-      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
       ;;
 
     osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
       fi
       archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       hardcode_libdir_separator=:
       ;;
 
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+          $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec='-rpath $libdir'
@@ -9323,24 +10081,24 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
 
     solaris*)
       no_undefined_flag=' -z defs'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	wlarc='$wl'
+	archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+          $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
 	case `$CC -V 2>&1` in
 	*"Compilers 5.0"*)
 	  wlarc=''
-	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+            $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
 	  ;;
 	*)
-	  wlarc='${wl}'
-	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  wlarc='$wl'
+	  archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
 	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+            $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
 	  ;;
 	esac
       fi
@@ -9350,11 +10108,11 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       solaris2.[0-5] | solaris2.[0-5].*) ;;
       *)
 	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but understands '-z linker_flag'.  GCC discards it without '$wl',
 	# but is careful enough not to reorder.
 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	if test yes = "$GCC"; then
+	  whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
 	else
 	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
 	fi
@@ -9364,10 +10122,10 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       ;;
 
     sunos4*)
-      if test "x$host_vendor" = xsequent; then
+      if test sequent = "$host_vendor"; then
 	# Use $CC to link under sequent, because it throws in some extra .o
 	# files that make .init and .fini sections work.
-	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
       fi
@@ -9416,43 +10174,43 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag='${wl}-z,text'
+      no_undefined_flag='$wl-z,text'
       archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
     sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
+      # Note: We CANNOT use -z defs as we might desire, because we do not
       # link with -lc, and that would cause any symbols used from libc to
       # always be unresolved, which means just about no library would
       # ever link correctly.  If we're not using GNU ld we use -z text
       # though, which does catch some bad symbols but isn't as heavy-handed
       # as -z defs.
-      no_undefined_flag='${wl}-z,text'
-      allow_undefined_flag='${wl}-z,nodefs'
+      no_undefined_flag='$wl-z,text'
+      allow_undefined_flag='$wl-z,nodefs'
       archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_flag_spec='$wl-R,$libdir'
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
-      export_dynamic_flag_spec='${wl}-Bexport'
+      export_dynamic_flag_spec='$wl-Bexport'
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
@@ -9467,10 +10225,10 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       ;;
     esac
 
-    if test x$host_vendor = xsni; then
+    if test sni = "$host_vendor"; then
       case $host in
       sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	export_dynamic_flag_spec='$wl-Blargedynsym'
 	;;
       esac
     fi
@@ -9478,7 +10236,7 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
 $as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
+test no = "$ld_shlibs" && can_build_shared=no
 
 with_gnu_ld=$with_gnu_ld
 
@@ -9504,7 +10262,7 @@ x|xyes)
   # Assume -lc should be added
   archive_cmds_need_lc=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
+  if test yes,yes = "$GCC,$enable_shared"; then
     case $archive_cmds in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
@@ -9719,14 +10477,14 @@ esac
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
 $as_echo_n "checking dynamic linker characteristics... " >&6; }
 
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
+    darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+    *) lt_awk_arg='/^libraries:/' ;;
   esac
   case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
+    mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+    *) lt_sed_strip_eq='s|=/|/|g' ;;
   esac
   lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
   case $lt_search_path_spec in
@@ -9742,28 +10500,35 @@ if test "$GCC" = yes; then
     ;;
   esac
   # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
+  # and add multilib dir if necessary...
   lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  # ...but if some path component already ends with the multilib dir we assume
+  # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+  case "$lt_multi_os_dir; $lt_search_path_spec " in
+  "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+    lt_multi_os_dir=
+    ;;
+  esac
   for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
+    if test -d "$lt_sys_path$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+    elif test -n "$lt_multi_os_dir"; then
       test -d "$lt_sys_path" && \
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
   lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+  lt_foo = "";
+  lt_count = 0;
   for (lt_i = NF; lt_i > 0; lt_i--) {
     if ($lt_i != "" && $lt_i != ".") {
       if ($lt_i == "..") {
         lt_count++;
       } else {
         if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
+          lt_foo = "/" $lt_i lt_foo;
         } else {
           lt_count--;
         }
@@ -9777,7 +10542,7 @@ BEGIN {RS=" "; FS="/|\n";} {
   # for these hosts.
   case $host_os in
     mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+      $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
   esac
   sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
 else
@@ -9786,7 +10551,7 @@ fi
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -9803,14 +10568,16 @@ hardcode_into_libs=no
 # flags to be left without arguments
 need_version=unknown
 
+
+
 case $host_os in
 aix3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
   # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
+  soname_spec='$libname$release$shared_ext$major'
   ;;
 
 aix[4-9]*)
@@ -9818,41 +10585,91 @@ aix[4-9]*)
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
     shlibpath_var=LD_LIBRARY_PATH
   else
     # With GCC up to 2.95.x, collect2 would create an import file
     # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
     # development snapshots of GCC prior to 3.0.
     case $host_os in
       aix4 | aix4.[01] | aix4.[01].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
       fi
       ;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
     # soname into executable. Probably we can add versioning support to
     # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
       # instead of lib<name>.a to let people know that these are not
       # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
       # We preserve .a as extension for shared libraries through AIX4.2
       # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
     shlibpath_var=LIBPATH
   fi
   ;;
@@ -9862,18 +10679,18 @@ amigaos*)
   powerpc)
     # Since July 2007 AmigaOS4 officially supports .so libraries.
     # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
     ;;
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
 
 beos*)
-  library_names_spec='${libname}${shared_ext}'
+  library_names_spec='$libname$shared_ext'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
   ;;
@@ -9881,8 +10698,8 @@ beos*)
 bsdi[45]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -9894,7 +10711,7 @@ bsdi[45]*)
 
 cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext_cmds=.dll
   need_version=no
   need_lib_prefix=no
 
@@ -9903,8 +10720,8 @@ cygwin* | mingw* | pw32* | cegcc*)
     # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
@@ -9920,17 +10737,17 @@ cygwin* | mingw* | pw32* | cegcc*)
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
 
       sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
@@ -9939,8 +10756,8 @@ cygwin* | mingw* | pw32* | cegcc*)
   *,cl*)
     # Native MSVC
     libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
+    soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
 
     case $build_os in
     mingw*)
@@ -9967,7 +10784,7 @@ cygwin* | mingw* | pw32* | cegcc*)
       sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
       ;;
     *)
-      sys_lib_search_path_spec="$LIB"
+      sys_lib_search_path_spec=$LIB
       if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
         # It is most probably a Windows format PATH.
         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -9980,8 +10797,8 @@ cygwin* | mingw* | pw32* | cegcc*)
     esac
 
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname'
@@ -9994,7 +10811,7 @@ cygwin* | mingw* | pw32* | cegcc*)
 
   *)
     # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
   esac
@@ -10007,8 +10824,8 @@ darwin* | rhapsody*)
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -10021,8 +10838,8 @@ dgux*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -10040,12 +10857,13 @@ freebsd* | dragonfly*)
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
       need_version=no
       need_lib_prefix=no
       ;;
     freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
       need_version=yes
       ;;
   esac
@@ -10070,26 +10888,15 @@ freebsd* | dragonfly*)
   esac
   ;;
 
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
 haiku*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
   sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
@@ -10107,14 +10914,15 @@ hpux9* | hpux10* | hpux11*)
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
       sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
     else
       sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   hppa*64*)
     shrext_cmds='.sl'
@@ -10122,8 +10930,8 @@ hpux9* | hpux10* | hpux11*)
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
@@ -10132,8 +10940,8 @@ hpux9* | hpux10* | hpux11*)
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     ;;
   esac
   # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -10146,8 +10954,8 @@ interix[3-9]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -10158,7 +10966,7 @@ irix5* | irix6* | nonstopux*)
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
     *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
+	if test yes = "$lt_cv_prog_gnu_ld"; then
 		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
@@ -10166,8 +10974,8 @@ irix5* | irix6* | nonstopux*)
   esac
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
   case $host_os in
   irix5* | nonstopux*)
     libsuff= shlibsuff=
@@ -10186,8 +10994,8 @@ irix5* | irix6* | nonstopux*)
   esac
   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
   shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
   hardcode_into_libs=yes
   ;;
 
@@ -10196,13 +11004,33 @@ linux*oldld* | linux*aout* | linux*coff*)
   dynamic_linker=no
   ;;
 
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec='-L$libdir'
+  ;;
+
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -10246,7 +11074,12 @@ fi
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Append ld.so.conf contents to the search path
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -10266,12 +11099,12 @@ netbsd*)
   need_lib_prefix=no
   need_version=no
   if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
   shlibpath_var=LD_LIBRARY_PATH
@@ -10281,7 +11114,7 @@ netbsd*)
 
 newsos6)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   ;;
@@ -10290,58 +11123,68 @@ newsos6)
   version_type=qnx
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   dynamic_linker='ldqnx.so'
   ;;
 
-openbsd*)
+openbsd* | bitrig*)
   version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
+  sys_lib_dlsearch_path_spec=/usr/lib
   need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
   else
-    shlibpath_overrides_runpath=yes
+    need_version=yes
   fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   ;;
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
   need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
   dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
   ;;
 
 osf3* | osf4* | osf5*)
   version_type=osf
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
   ;;
 
 rdos*)
@@ -10352,8 +11195,8 @@ solaris*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
@@ -10363,11 +11206,11 @@ solaris*)
 
 sunos4*)
   version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     need_lib_prefix=no
   fi
   need_version=yes
@@ -10375,8 +11218,8 @@ sunos4*)
 
 sysv4 | sysv4.3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   case $host_vendor in
     sni)
@@ -10397,24 +11240,24 @@ sysv4 | sysv4.3*)
   ;;
 
 sysv4*MP*)
-  if test -d /usr/nec ;then
+  if test -d /usr/nec; then
     version_type=linux # correct to gnu/linux during the next big refactor
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
     shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
 sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
+  version_type=sco
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -10432,7 +11275,7 @@ tpf*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
@@ -10440,8 +11283,8 @@ tpf*)
 
 uts4*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -10451,22 +11294,29 @@ uts4*)
 esac
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
 $as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
 fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
 fi
 
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
 
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
 
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
 
 
 
@@ -10556,20 +11406,28 @@ fi
 
 
 
+
+
+
+
+
+
+
+
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
 $as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 hardcode_action=
 if test -n "$hardcode_libdir_flag_spec" ||
    test -n "$runpath_var" ||
-   test "X$hardcode_automatic" = "Xyes" ; then
+   test yes = "$hardcode_automatic"; then
 
   # We can hardcode non-existent directories.
-  if test "$hardcode_direct" != no &&
+  if test no != "$hardcode_direct" &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
-     test "$hardcode_minus_L" != no; then
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+     test no != "$hardcode_minus_L"; then
     # Linking always hardcodes the temporary library directory.
     hardcode_action=relink
   else
@@ -10584,12 +11442,12 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
 $as_echo "$hardcode_action" >&6; }
 
-if test "$hardcode_action" = relink ||
-   test "$inherit_rpath" = yes; then
+if test relink = "$hardcode_action" ||
+   test yes = "$inherit_rpath"; then
   # Fast installation is not supported
   enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
@@ -10599,7 +11457,7 @@ fi
 
 
 
-  if test "x$enable_dlopen" != xyes; then
+  if test yes != "$enable_dlopen"; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
   enable_dlopen_self_static=unknown
@@ -10609,23 +11467,23 @@ else
 
   case $host_os in
   beos*)
-    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen=load_add_on
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ;;
 
   mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen=LoadLibrary
     lt_cv_dlopen_libs=
     ;;
 
   cygwin*)
-    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen=dlopen
     lt_cv_dlopen_libs=
     ;;
 
   darwin*)
-  # if libdl is installed we need to link against it
+    # if libdl is installed we need to link against it
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
 if ${ac_cv_lib_dl_dlopen+:} false; then :
@@ -10663,10 +11521,10 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
 if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
 else
 
-    lt_cv_dlopen="dyld"
+    lt_cv_dlopen=dyld
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
 
@@ -10674,10 +11532,18 @@ fi
 
     ;;
 
+  tpf*)
+    # Don't try to run any link tests for TPF.  We know it's impossible
+    # because TPF is a cross-compiler, and we know how we open DSOs.
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=no
+    ;;
+
   *)
     ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
 if test "x$ac_cv_func_shl_load" = xyes; then :
-  lt_cv_dlopen="shl_load"
+  lt_cv_dlopen=shl_load
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
 $as_echo_n "checking for shl_load in -ldld... " >&6; }
@@ -10716,11 +11582,11 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
 $as_echo "$ac_cv_lib_dld_shl_load" >&6; }
 if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+  lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
 else
   ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
 if test "x$ac_cv_func_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen"
+  lt_cv_dlopen=dlopen
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
@@ -10759,7 +11625,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
 if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
 $as_echo_n "checking for dlopen in -lsvld... " >&6; }
@@ -10798,7 +11664,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
 $as_echo "$ac_cv_lib_svld_dlopen" >&6; }
 if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
 $as_echo_n "checking for dld_link in -ldld... " >&6; }
@@ -10837,7 +11703,7 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
 $as_echo "$ac_cv_lib_dld_dld_link" >&6; }
 if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+  lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
 fi
 
 
@@ -10858,21 +11724,21 @@ fi
     ;;
   esac
 
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
+  if test no = "$lt_cv_dlopen"; then
     enable_dlopen=no
+  else
+    enable_dlopen=yes
   fi
 
   case $lt_cv_dlopen in
   dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+    save_CPPFLAGS=$CPPFLAGS
+    test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
-    save_LDFLAGS="$LDFLAGS"
+    save_LDFLAGS=$LDFLAGS
     wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
-    save_LIBS="$LIBS"
+    save_LIBS=$LIBS
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
@@ -10880,7 +11746,7 @@ $as_echo_n "checking whether a program can dlopen itse
 if ${lt_cv_dlopen_self+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  	  if test "$cross_compiling" = yes; then :
+  	  if test yes = "$cross_compiling"; then :
   lt_cv_dlopen_self=cross
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -10927,9 +11793,9 @@ else
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
    correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
 int fnord () __attribute__((visibility("default")));
 #endif
 
@@ -10959,7 +11825,7 @@ _LT_EOF
   (eval $ac_link) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -10979,14 +11845,14 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
 $as_echo "$lt_cv_dlopen_self" >&6; }
 
-    if test "x$lt_cv_dlopen_self" = xyes; then
+    if test yes = "$lt_cv_dlopen_self"; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
 if ${lt_cv_dlopen_self_static+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  	  if test "$cross_compiling" = yes; then :
+  	  if test yes = "$cross_compiling"; then :
   lt_cv_dlopen_self_static=cross
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -11033,9 +11899,9 @@ else
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
    correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
 int fnord () __attribute__((visibility("default")));
 #endif
 
@@ -11065,7 +11931,7 @@ _LT_EOF
   (eval $ac_link) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -11086,9 +11952,9 @@ fi
 $as_echo "$lt_cv_dlopen_self_static" >&6; }
     fi
 
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
+    CPPFLAGS=$save_CPPFLAGS
+    LDFLAGS=$save_LDFLAGS
+    LIBS=$save_LIBS
     ;;
   esac
 
@@ -11132,7 +11998,7 @@ else
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
   darwin*)
-    if test -n "$STRIP" ; then
+    if test -n "$STRIP"; then
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
       { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -11160,7 +12026,7 @@ fi
 
 
 
-  # Report which library types will actually be built
+  # Report what library types will actually be built
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
 $as_echo_n "checking if libtool supports shared libraries... " >&6; }
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
@@ -11168,13 +12034,13 @@ $as_echo "$can_build_shared" >&6; }
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
 $as_echo_n "checking whether to build shared libraries... " >&6; }
-  test "$can_build_shared" = "no" && enable_shared=no
+  test no = "$can_build_shared" && enable_shared=no
 
   # On AIX, shared libraries and static libraries use the same namespace, and
   # are all built from PIC.
   case $host_os in
   aix3*)
-    test "$enable_shared" = yes && enable_static=no
+    test yes = "$enable_shared" && enable_static=no
     if test -n "$RANLIB"; then
       archive_cmds="$archive_cmds~\$RANLIB \$lib"
       postinstall_cmds='$RANLIB $lib'
@@ -11182,8 +12048,12 @@ $as_echo_n "checking whether to build shared libraries
     ;;
 
   aix[4-9]*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
+    if test ia64 != "$host_cpu"; then
+      case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+      yes,aix,yes) ;;			# shared object as lib.so file only
+      yes,svr4,*) ;;			# shared object as lib.so archive member only
+      yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+      esac
     fi
     ;;
   esac
@@ -11193,7 +12063,7 @@ $as_echo "$enable_shared" >&6; }
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
 $as_echo_n "checking whether to build static libraries... " >&6; }
   # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
+  test yes = "$enable_shared" || enable_static=yes
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
 $as_echo "$enable_static" >&6; }
 
@@ -11207,7 +12077,7 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext 
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-CC="$lt_save_CC"
+CC=$lt_save_CC
 
 
 
@@ -11306,7 +12176,6 @@ ac_x_header_dirs='
 /usr/include/X11R5
 /usr/include/X11R4
 
-/opt/X11/include
 /usr/local/X11/include
 /usr/local/X11R7/include
 /usr/local/X11R6/include
@@ -12083,6 +12952,39 @@ fi
 fi
 
 
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5
+$as_echo_n "checking size of long... " >&6; }
+if ${ac_cv_sizeof_long+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_long" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (long)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_long=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5
+$as_echo "$ac_cv_sizeof_long" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG $ac_cv_sizeof_long
+_ACEOF
+
+
 ac_config_files="$ac_config_files Makefile"
 
 cat >confcache <<\_ACEOF
@@ -12230,6 +13132,14 @@ LIBOBJS=$ac_libobjs
 LTLIBOBJS=$ac_ltlibobjs
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
  if test -n "$EXEEXT"; then
   am__EXEEXT_TRUE=
   am__EXEEXT_FALSE='#'
@@ -12548,16 +13458,16 @@ if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -12617,29 +13527,17 @@ else
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
 
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 
@@ -12659,8 +13557,8 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
+This file was extended by ox_toolkit $as_me 20150825, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -12716,11 +13614,11 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.68,
+ox_toolkit config.status 20150825
+configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -12800,7 +13698,7 @@ fi
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
   shift
   \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
   CONFIG_SHELL='$SHELL'
@@ -12840,6 +13738,7 @@ enable_shared='`$ECHO "$enable_shared" | $SED "$delay_
 enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
 pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
 enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
 SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
 ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
 PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
@@ -12889,10 +13788,13 @@ compiler='`$ECHO "$compiler" | $SED "$delay_single_quo
 GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
 nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
 lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
 objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
 MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
 lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
@@ -12957,7 +13859,8 @@ finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_sing
 finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
 hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
 sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
 hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
 enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
 enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
@@ -13008,9 +13911,12 @@ CFLAGS \
 compiler \
 lt_cv_sys_global_symbol_pipe \
 lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
 lt_cv_sys_global_symbol_to_c_name_address \
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
 nm_file_list_spec \
+lt_cv_truncate_bin \
 lt_prog_compiler_no_builtin_flag \
 lt_prog_compiler_pic \
 lt_prog_compiler_wl \
@@ -13045,7 +13951,7 @@ old_striplib \
 striplib; do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -13072,10 +13978,11 @@ postinstall_cmds \
 postuninstall_cmds \
 finish_cmds \
 sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec; do
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path; do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -13084,19 +13991,16 @@ sys_lib_dlsearch_path_spec; do
 done
 
 ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
 
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
 # commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
    setopt NO_GLOB_SUBST
 fi
 
 
     PACKAGE='$PACKAGE'
     VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
     RM='$RM'
     ofile='$ofile'
 
@@ -13544,7 +14448,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
 
   case $ac_file$ac_mode in
     "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # Older Autoconf quotes --file arguments for eval, but not when files
   # are listed without --file.  Let's play safe and only enable the eval
   # if we detect the quoting.
   case $CONFIG_FILES in
@@ -13557,7 +14461,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
     # Strip MF so we end up with the name of the file.
     mf=`echo "$mf" | sed -e 's/:.*$//'`
     # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
+    # We used to match only the files named 'Makefile.in', but
     # some people rename them; so instead we look at the file content.
     # Grep'ing the first line is not enough: some people post-process
     # each Makefile.in and add a new line on top of each file to say so.
@@ -13591,21 +14495,19 @@ $as_echo X"$mf" |
       continue
     fi
     # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
+    # from the Makefile without running 'make'.
     DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
     test -z "$DEPDIR" && continue
     am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "am__include" && continue
+    test -z "$am__include" && continue
     am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
     # Find all dependency output files, they are included files with
     # $(DEPDIR) in their names.  We invoke sed twice because it is the
     # simplest approach to changing $(DEPDIR) to its actual value in the
     # expansion.
     for file in `sed -n "
       s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
       # Make sure the directory exists.
       test -f "$dirpart/$file" && continue
       fdir=`$as_dirname -- "$file" ||
@@ -13640,56 +14542,54 @@ $as_echo X"$file" |
  ;;
     "libtool":C)
 
-    # See if we are running on zsh, and set the options which allow our
+    # See if we are running on zsh, and set the options that allow our
     # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
+    if test -n "${ZSH_VERSION+set}"; then
       setopt NO_GLOB_SUBST
     fi
 
-    cfgfile="${ofile}T"
+    cfgfile=${ofile}T
     trap "$RM \"$cfgfile\"; exit 1" 1 2 15
     $RM "$cfgfile"
 
     cat <<_LT_EOF >> "$cfgfile"
 #! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Generated automatically by $as_me ($PACKAGE) $VERSION
 # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
 #
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the  same
+# distribution terms that you use for the rest of that program.
 #
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 # The names of the tagged configurations supported by this script.
-available_tags=""
+available_tags=''
 
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
 # ### BEGIN LIBTOOL CONFIG
 
 # Which release of libtool.m4 was used?
@@ -13708,6 +14608,9 @@ pic_mode=$pic_mode
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
 
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
 # Shell to use when invoking shell scripts.
 SHELL=$lt_SHELL
 
@@ -13825,18 +14728,27 @@ global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 # Transform the output of nm in a proper C declaration.
 global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
 # Transform the output of nm in a C name address pair.
 global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
 # Transform the output of nm in a C name address pair when lib prefix is needed.
 global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
 
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
 # Specify filename containing input files for \$NM.
 nm_file_list_spec=$lt_nm_file_list_spec
 
-# The root where to search for dependent libraries,and in which our libraries should be installed.
+# The root where to search for dependent libraries,and where our libraries should be installed.
 lt_sysroot=$lt_sysroot
 
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
 # The name of the directory that contains temporary libtool files.
 objdir=$objdir
 
@@ -13927,9 +14839,12 @@ hardcode_into_libs=$hardcode_into_libs
 # Compile-time system search path for libraries.
 sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
 
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
+
 # Whether dlopen is supported.
 dlopen_support=$enable_dlopen
 
@@ -14021,13 +14936,13 @@ hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spe
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary.
 hardcode_direct=$hardcode_direct
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
 # library is relocated.
 hardcode_direct_absolute=$hardcode_direct_absolute
 
@@ -14079,13 +14994,72 @@ hardcode_action=$hardcode_action
 
 _LT_EOF
 
+    cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
   case $host_os in
   aix3*)
     cat <<\_LT_EOF >> "$cfgfile"
 # AIX sometimes has problems with the GCC collect2 program.  For some
 # reason, if we set the COLLECT_NAMES environment variable, the problems
 # vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
   COLLECT_NAMES=
   export COLLECT_NAMES
 fi
@@ -14094,7 +15068,7 @@ _LT_EOF
   esac
 
 
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
 
 
   # We use sed instead of cat because bash on DJGPP gets confused if
@@ -14103,165 +15077,6 @@ ltmain="$ac_aux_dir/ltmain.sh"
   # is reportedly fixed, but why not run on old versions too?
   sed '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
-
-  if test x"$xsi_shell" = xyes; then
-  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-func_dirname ()\
-{\
-\    case ${1} in\
-\      */*) func_dirname_result="${1%/*}${2}" ;;\
-\      *  ) func_dirname_result="${3}" ;;\
-\    esac\
-} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_basename ()$/,/^} # func_basename /c\
-func_basename ()\
-{\
-\    func_basename_result="${1##*/}"\
-} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-func_dirname_and_basename ()\
-{\
-\    case ${1} in\
-\      */*) func_dirname_result="${1%/*}${2}" ;;\
-\      *  ) func_dirname_result="${3}" ;;\
-\    esac\
-\    func_basename_result="${1##*/}"\
-} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-func_stripname ()\
-{\
-\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-\    # positional parameters, so assign one to ordinary parameter first.\
-\    func_stripname_result=${3}\
-\    func_stripname_result=${func_stripname_result#"${1}"}\
-\    func_stripname_result=${func_stripname_result%"${2}"}\
-} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-func_split_long_opt ()\
-{\
-\    func_split_long_opt_name=${1%%=*}\
-\    func_split_long_opt_arg=${1#*=}\
-} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-func_split_short_opt ()\
-{\
-\    func_split_short_opt_arg=${1#??}\
-\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-func_lo2o ()\
-{\
-\    case ${1} in\
-\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-\      *)    func_lo2o_result=${1} ;;\
-\    esac\
-} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_xform ()$/,/^} # func_xform /c\
-func_xform ()\
-{\
-    func_xform_result=${1%.*}.lo\
-} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_arith ()$/,/^} # func_arith /c\
-func_arith ()\
-{\
-    func_arith_result=$(( $* ))\
-} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_len ()$/,/^} # func_len /c\
-func_len ()\
-{\
-    func_len_result=${#1}\
-} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-fi
-
-if test x"$lt_shell_append" = xyes; then
-  sed -e '/^func_append ()$/,/^} # func_append /c\
-func_append ()\
-{\
-    eval "${1}+=\\${2}"\
-} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-func_append_quoted ()\
-{\
-\    func_quote_for_eval "${2}"\
-\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  # Save a `func_append' function call where possible by direct use of '+='
-  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-else
-  # Save a `func_append' function call even when '+=' is not available
-  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-fi
-
 
    mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")