Annotation of OpenXM/src/ox_toolkit/missing, Revision 1.1
1.1 ! ohara 1: #! /bin/sh
! 2: # Common stub for a few missing GNU programs while installing.
! 3: # Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
! 4: # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
! 5:
! 6: # This program is free software; you can redistribute it and/or modify
! 7: # it under the terms of the GNU General Public License as published by
! 8: # the Free Software Foundation; either version 2, or (at your option)
! 9: # any later version.
! 10:
! 11: # This program is distributed in the hope that it will be useful,
! 12: # but WITHOUT ANY WARRANTY; without even the implied warranty of
! 13: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
! 14: # GNU General Public License for more details.
! 15:
! 16: # You should have received a copy of the GNU General Public License
! 17: # along with this program; if not, write to the Free Software
! 18: # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
! 19: # 02111-1307, USA.
! 20:
! 21: # As a special exception to the GNU General Public License, if you
! 22: # distribute this file as part of a program that contains a
! 23: # configuration script generated by Autoconf, you may include it under
! 24: # the same distribution terms that you use for the rest of that program.
! 25:
! 26: if test $# -eq 0; then
! 27: echo 1>&2 "Try \`$0 --help' for more information"
! 28: exit 1
! 29: fi
! 30:
! 31: run=:
! 32:
! 33: # In the cases where this matters, `missing' is being run in the
! 34: # srcdir already.
! 35: if test -f configure.ac; then
! 36: configure_ac=configure.ac
! 37: else
! 38: configure_ac=configure.in
! 39: fi
! 40:
! 41: case "$1" in
! 42: --run)
! 43: # Try to run requested program, and just exit if it succeeds.
! 44: run=
! 45: shift
! 46: "$@" && exit 0
! 47: ;;
! 48: esac
! 49:
! 50: # If it does not exist, or fails to run (possibly an outdated version),
! 51: # try to emulate it.
! 52: case "$1" in
! 53:
! 54: -h|--h|--he|--hel|--help)
! 55: echo "\
! 56: $0 [OPTION]... PROGRAM [ARGUMENT]...
! 57:
! 58: Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
! 59: error status if there is no known handling for PROGRAM.
! 60:
! 61: Options:
! 62: -h, --help display this help and exit
! 63: -v, --version output version information and exit
! 64: --run try to run the given command, and emulate it if it fails
! 65:
! 66: Supported PROGRAM values:
! 67: aclocal touch file \`aclocal.m4'
! 68: autoconf touch file \`configure'
! 69: autoheader touch file \`config.h.in'
! 70: automake touch all \`Makefile.in' files
! 71: bison create \`y.tab.[ch]', if possible, from existing .[ch]
! 72: flex create \`lex.yy.c', if possible, from existing .c
! 73: help2man touch the output file
! 74: lex create \`lex.yy.c', if possible, from existing .c
! 75: makeinfo touch the output file
! 76: tar try tar, gnutar, gtar, then tar without non-portable flags
! 77: yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
! 78: ;;
! 79:
! 80: -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
! 81: echo "missing 0.3 - GNU automake"
! 82: ;;
! 83:
! 84: -*)
! 85: echo 1>&2 "$0: Unknown \`$1' option"
! 86: echo 1>&2 "Try \`$0 --help' for more information"
! 87: exit 1
! 88: ;;
! 89:
! 90: aclocal)
! 91: echo 1>&2 "\
! 92: WARNING: \`$1' is missing on your system. You should only need it if
! 93: you modified \`acinclude.m4' or \`${configure_ac}'. You might want
! 94: to install the \`Automake' and \`Perl' packages. Grab them from
! 95: any GNU archive site."
! 96: touch aclocal.m4
! 97: ;;
! 98:
! 99: autoconf)
! 100: echo 1>&2 "\
! 101: WARNING: \`$1' is missing on your system. You should only need it if
! 102: you modified \`${configure_ac}'. You might want to install the
! 103: \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
! 104: archive site."
! 105: touch configure
! 106: ;;
! 107:
! 108: autoheader)
! 109: echo 1>&2 "\
! 110: WARNING: \`$1' is missing on your system. You should only need it if
! 111: you modified \`acconfig.h' or \`${configure_ac}'. You might want
! 112: to install the \`Autoconf' and \`GNU m4' packages. Grab them
! 113: from any GNU archive site."
! 114: files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
! 115: test -z "$files" && files="config.h"
! 116: touch_files=
! 117: for f in $files; do
! 118: case "$f" in
! 119: *:*) touch_files="$touch_files "`echo "$f" |
! 120: sed -e 's/^[^:]*://' -e 's/:.*//'`;;
! 121: *) touch_files="$touch_files $f.in";;
! 122: esac
! 123: done
! 124: touch $touch_files
! 125: ;;
! 126:
! 127: automake)
! 128: echo 1>&2 "\
! 129: WARNING: \`$1' is missing on your system. You should only need it if
! 130: you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
! 131: You might want to install the \`Automake' and \`Perl' packages.
! 132: Grab them from any GNU archive site."
! 133: find . -type f -name Makefile.am -print |
! 134: sed 's/\.am$/.in/' |
! 135: while read f; do touch "$f"; done
! 136: ;;
! 137:
! 138: bison|yacc)
! 139: echo 1>&2 "\
! 140: WARNING: \`$1' is missing on your system. You should only need it if
! 141: you modified a \`.y' file. You may need the \`Bison' package
! 142: in order for those modifications to take effect. You can get
! 143: \`Bison' from any GNU archive site."
! 144: rm -f y.tab.c y.tab.h
! 145: if [ $# -ne 1 ]; then
! 146: eval LASTARG="\${$#}"
! 147: case "$LASTARG" in
! 148: *.y)
! 149: SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
! 150: if [ -f "$SRCFILE" ]; then
! 151: cp "$SRCFILE" y.tab.c
! 152: fi
! 153: SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
! 154: if [ -f "$SRCFILE" ]; then
! 155: cp "$SRCFILE" y.tab.h
! 156: fi
! 157: ;;
! 158: esac
! 159: fi
! 160: if [ ! -f y.tab.h ]; then
! 161: echo >y.tab.h
! 162: fi
! 163: if [ ! -f y.tab.c ]; then
! 164: echo 'main() { return 0; }' >y.tab.c
! 165: fi
! 166: ;;
! 167:
! 168: lex|flex)
! 169: echo 1>&2 "\
! 170: WARNING: \`$1' is missing on your system. You should only need it if
! 171: you modified a \`.l' file. You may need the \`Flex' package
! 172: in order for those modifications to take effect. You can get
! 173: \`Flex' from any GNU archive site."
! 174: rm -f lex.yy.c
! 175: if [ $# -ne 1 ]; then
! 176: eval LASTARG="\${$#}"
! 177: case "$LASTARG" in
! 178: *.l)
! 179: SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
! 180: if [ -f "$SRCFILE" ]; then
! 181: cp "$SRCFILE" lex.yy.c
! 182: fi
! 183: ;;
! 184: esac
! 185: fi
! 186: if [ ! -f lex.yy.c ]; then
! 187: echo 'main() { return 0; }' >lex.yy.c
! 188: fi
! 189: ;;
! 190:
! 191: help2man)
! 192: echo 1>&2 "\
! 193: WARNING: \`$1' is missing on your system. You should only need it if
! 194: you modified a dependency of a manual page. You may need the
! 195: \`Help2man' package in order for those modifications to take
! 196: effect. You can get \`Help2man' from any GNU archive site."
! 197:
! 198: file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
! 199: if test -z "$file"; then
! 200: file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
! 201: fi
! 202: if [ -f "$file" ]; then
! 203: touch $file
! 204: else
! 205: test -z "$file" || exec >$file
! 206: echo ".ab help2man is required to generate this page"
! 207: exit 1
! 208: fi
! 209: ;;
! 210:
! 211: makeinfo)
! 212: if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
! 213: # We have makeinfo, but it failed.
! 214: exit 1
! 215: fi
! 216:
! 217: echo 1>&2 "\
! 218: WARNING: \`$1' is missing on your system. You should only need it if
! 219: you modified a \`.texi' or \`.texinfo' file, or any other file
! 220: indirectly affecting the aspect of the manual. The spurious
! 221: call might also be the consequence of using a buggy \`make' (AIX,
! 222: DU, IRIX). You might want to install the \`Texinfo' package or
! 223: the \`GNU make' package. Grab either from any GNU archive site."
! 224: file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
! 225: if test -z "$file"; then
! 226: file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
! 227: file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
! 228: fi
! 229: touch $file
! 230: ;;
! 231:
! 232: tar)
! 233: shift
! 234: if test -n "$run"; then
! 235: echo 1>&2 "ERROR: \`tar' requires --run"
! 236: exit 1
! 237: fi
! 238:
! 239: # We have already tried tar in the generic part.
! 240: # Look for gnutar/gtar before invocation to avoid ugly error
! 241: # messages.
! 242: if (gnutar --version > /dev/null 2>&1); then
! 243: gnutar ${1+"$@"} && exit 0
! 244: fi
! 245: if (gtar --version > /dev/null 2>&1); then
! 246: gtar ${1+"$@"} && exit 0
! 247: fi
! 248: firstarg="$1"
! 249: if shift; then
! 250: case "$firstarg" in
! 251: *o*)
! 252: firstarg=`echo "$firstarg" | sed s/o//`
! 253: tar "$firstarg" ${1+"$@"} && exit 0
! 254: ;;
! 255: esac
! 256: case "$firstarg" in
! 257: *h*)
! 258: firstarg=`echo "$firstarg" | sed s/h//`
! 259: tar "$firstarg" ${1+"$@"} && exit 0
! 260: ;;
! 261: esac
! 262: fi
! 263:
! 264: echo 1>&2 "\
! 265: WARNING: I can't seem to be able to run \`tar' with the given arguments.
! 266: You may want to install GNU tar or Free paxutils, or check the
! 267: command line arguments."
! 268: exit 1
! 269: ;;
! 270:
! 271: *)
! 272: echo 1>&2 "\
! 273: WARNING: \`$1' is needed, and you do not seem to have it handy on your
! 274: system. You might have modified some files without having the
! 275: proper tools for further handling them. Check the \`README' file,
! 276: it often tells you about the needed prerequirements for installing
! 277: this package. You may also peek at any GNU archive site, in case
! 278: some other package would contain this missing \`$1' program."
! 279: exit 1
! 280: ;;
! 281: esac
! 282:
! 283: exit 0
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to missing CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM / src / ox_toolkit