OpenXM_contrib/gc/Makefile - diff

Return to Makefile CVS log

Up to [local] / OpenXM_contrib / gc

Diff for /OpenXM_contrib/gc/Attic/Makefile between version 1.1.1.1 and 1.3

version 1.1.1.1, 1999/11/27 10:58:31

version 1.3, 2001/05/06 09:56:42

Line 7

# and runs some tests of collector and cords. Does not add cords or

# c++ interface to gc.a

# cord/de - builds dumb editor based on cords.

ABI_FLAG=

CC=gcc $(ABI_FLAG)

CXX=CC $(ABI_FLAG)

CXX=g++ $(ABI_FLAG)

AS=gcc -c -x assembler-with-cpp $(ABI_FLAG)

AS=as $(ABI_FLAG)

# The above doesn't work with gas, which doesn't run cpp.

# Define AS as `gcc -c -x assembler-with-cpp' instead.

# Under Irix 6, you will have to specify the ABI (-o32, -n32, or -64)

Line 24 CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EX

# Setjmp_test may yield overly optimistic results when compiled

# without optimization.

# -DSILENT disables statistics printing, and improves performance.

# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly

# -DFIND_LEAK causes GC_find_leak to be initially set.

# altered stubborn objects, at substantial performance cost.

# This causes the collector to assume that all inaccessible

# Use only for incremental collector debugging.

# -DFIND_LEAK causes the collector to assume that all inaccessible

# objects should have been explicitly deallocated, and reports exceptions.

# Finalization and the test program are not usable in this mode.

# -DSOLARIS_THREADS enables support for Solaris (thr_) threads.

Line 37 CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EX

Line 35 CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EX

# -D_SOLARIS_PTHREADS enables support for Solaris pthreads.

# Define SOLARIS_THREADS as well.

# -DIRIX_THREADS enables support for Irix pthreads. See README.irix.

# -DHPUX_THREADS enables support for HP/UX 11 pthreads.

# Also requires -D_REENTRANT. See README.hp.

# -DLINUX_THREADS enables support for Xavier Leroy's Linux threads.

# see README.linux. -D_REENTRANT may also be required.

# -DALL_INTERIOR_POINTERS allows all pointers to the interior

Line 85 CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EX

# finalize.c). Objects reachable from finalizable objects will be marked

# in a sepearte postpass, and hence their memory won't be reclaimed.

# Not recommended unless you are implementing a language that specifies

# these semantics.

# these semantics. Since 5.0, determines only only the initial value

# of GC_java_finalization variable.

# -DFINALIZE_ON_DEMAND causes finalizers to be run only in response

# to explicit GC_invoke_finalizers() calls.

# In 5.0 this became runtime adjustable, and this only determines the

# initial value of GC_finalize_on_demand.

# -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.

# This is useful if either the vendor malloc implementation is poor,

# or if REDIRECT_MALLOC is used.

Line 98 CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EX

Line 101 CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EX

# fragmentation, but generally better performance for large heaps.

# -DUSE_MMAP use MMAP instead of sbrk to get new memory.

# Works for Solaris and Irix.

# -DUSE_MUNMAP causes memory to be returned to the OS under the right

# circumstances. This currently disables VM-based incremental collection.

# This is currently experimental, and works only under some Unix and

# Linux versions.

# -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than

# GC_scratch_alloc() to get stack memory.

# -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever

Line 109 CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EX

Line 116 CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EX

# allocation strategy. The new strategy tries harder to minimize

# fragmentation, sometimes at the expense of spending more time in the

# large block allocator and/or collecting more frequently.

# If you expect the allocator to promtly use an explicitly expanded

# If you expect the allocator to promptly use an explicitly expanded

# heap, this is highly recommended.

# -DKEEP_BACK_PTRS Add code to save back pointers in debugging headers

# for objects allocated with the debugging allocator. If all objects

# through GC_MALLOC with GC_DEBUG defined, this allows the client

# to determine how particular or randomly chosen objects are reachable

# for debugging/profiling purposes. The backptr.h interface is

# implemented only if this is defined.

# -DGC_ASSERTIONS Enable some internal GC assertion checking. Currently

# this facility is only used in a few places. It is intended primarily

# for debugging of the garbage collector itself, but could also

# occasionally be useful for debugging of client code. Slows down the

# collector somewhat, but not drastically.

# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly

# altered stubborn objects, at substantial performance cost.

# Use only for debugging of the incremental collector.

LIBGC_CFLAGS= -O -DNO_SIGNALS -DSILENT \

-DREDIRECT_MALLOC=GC_malloc_uncollectable \

-DDONT_ADD_BYTE_AT_END -DALL_INTERIOR_POINTERS

Line 131 RANLIB= ranlib

Line 151 RANLIB= ranlib

srcdir = .

VPATH = $(srcdir)

OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o

OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o hpux_irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o

CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c

CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c hpux_irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c

CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c cord/cord.h cord/ec.h cord/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC cord/SCOPTIONS.amiga cord/SMakefile.amiga

Line 145 SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s a

Line 165 SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s a

threadlibs.c if_mach.c if_not_there.c gc_cpp.cc gc_cpp.h weakpointer.h \

gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h gc_alloc.h \

include/new_gc_alloc.h include/javaxfc.h sparc_sunos4_mach_dep.s \

solaris_threads.h $(CORD_SRCS)

solaris_threads.h backptr.h hpux_test_and_clear.s $(CORD_SRCS)

OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAKEFILE BCC_MAKEFILE \

README test.c test_cpp.cc setjmp_t.c SMakefile.amiga \

Line 153 OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAK

Line 173 OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAK

cord/gc.h include/gc.h include/gc_typed.h include/cord.h \

include/ec.h include/private/cord_pos.h include/private/gcconfig.h \

include/private/gc_hdrs.h include/private/gc_priv.h \

include/gc_cpp.h README.rs6000 \

include/gc_cpp.h README.rs6000 include/backptr.h \

include/weakpointer.h README.QUICK callprocs pc_excludes \

barrett_diagram README.OS2 README.Mac MacProjects.sit.hqx \

MacOS.c EMX_MAKEFILE makefile.depend README.debugging \

Line 162 OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAK

Line 182 OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAK

add_gc_prefix.c README.solaris2 README.sgi README.hp README.uts \

win32_threads.c NT_THREADS_MAKEFILE gc.mak README.dj Makefile.dj \

README.alpha README.linux version.h Makefile.DLLs \

WCC_MAKEFILE

WCC_MAKEFILE nursery.c include/gc_nursery.h include/gc_copy_descr.h \

include/leak_detector.h

CORD_INCLUDE_FILES= $(srcdir)/gc.h $(srcdir)/cord/cord.h $(srcdir)/cord/ec.h \

$(srcdir)/cord/private/cord_pos.h

Line 199 mark.o typd_mlc.o finalize.o: $(srcdir)/gc_mark.h

Line 220 mark.o typd_mlc.o finalize.o: $(srcdir)/gc_mark.h

base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)

echo > base_lib

rm -f on_sparc_sunos5_1

rm -f dont_ar_1

./if_mach SPARC SUNOS5 touch on_sparc_sunos5_1

./if_mach SPARC SUNOS5 touch dont_ar_1

./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o

./if_not_there on_sparc_sunos5_1 $(AR) ru gc.a $(OBJS) dyn_load.o

./if_mach M68K AMIGA touch dont_ar_1

./if_not_there on_sparc_sunos5_1 $(RANLIB) gc.a || cat /dev/null

./if_mach M68K AMIGA $(AR) -vrus gc.a $(OBJS) dyn_load.o

./if_not_there dont_ar_1 $(AR) ru gc.a $(OBJS) dyn_load.o

./if_not_there dont_ar_1 $(RANLIB) gc.a || cat /dev/null

# ignore ranlib failure; that usually means it doesn't exist, and isn't needed

cords: $(CORD_OBJS) cord/cordtest $(UTILS)

rm -f on_sparc_sunos5_3

rm -f dont_ar_3

./if_mach SPARC SUNOS5 touch on_sparc_sunos5_3

./if_mach SPARC SUNOS5 touch dont_ar_3

./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS)

./if_not_there on_sparc_sunos5_3 $(AR) ru gc.a $(CORD_OBJS)

./if_mach M68K AMIGA touch dont_ar_3

./if_not_there on_sparc_sunos5_3 $(RANLIB) gc.a || cat /dev/null

./if_mach M68K AMIGA $(AR) -vrus gc.a $(CORD_OBJS)

./if_not_there dont_ar_3 $(AR) ru gc.a $(CORD_OBJS)

./if_not_there dont_ar_3 $(RANLIB) gc.a || cat /dev/null

gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/gc_cpp.h $(srcdir)/gc.h Makefile

$(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc

Line 219 gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/gc_cpp.h $(src

Line 244 gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/gc_cpp.h $(src

test_cpp: $(srcdir)/test_cpp.cc $(srcdir)/gc_cpp.h gc_cpp.o $(srcdir)/gc.h \

base_lib $(UTILS)

rm -f test_cpp

./if_mach HP_PA "" $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a -ldld

./if_mach HP_PA HPUX $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a -ldld `./threadlibs`

./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a `./threadlibs`

c++: gc_cpp.o $(srcdir)/gc_cpp.h test_cpp

rm -f on_sparc_sunos5_4

rm -f dont_ar_4

./if_mach SPARC SUNOS5 touch on_sparc_sunos5_4

./if_mach SPARC SUNOS5 touch dont_ar_4

./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o

./if_not_there on_sparc_sunos5_4 $(AR) ru gc.a gc_cpp.o

./if_mach M68K AMIGA touch dont_ar_4

./if_not_there on_sparc_sunos5_4 $(RANLIB) gc.a || cat /dev/null

./if_mach M68K AMIGA $(AR) -vrus gc.a gc_cpp.o

./if_not_there dont_ar_4 $(AR) ru gc.a gc_cpp.o

./if_not_there dont_ar_4 $(RANLIB) gc.a || cat /dev/null

./test_cpp 1

echo > c++

Line 276 mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_ma

Line 303 mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_ma

./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.s

./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.s

./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s

./if_mach SPARC OPENBSD $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s

./if_mach HP_PA HPUX $(AS) -o hpux_test_and_clear.o $(srcdir)/hpux_test_and_clear.s

./if_mach HP_PA HPUX $(CC) -c -o md_tmp.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c

./if_mach HP_PA HPUX ld -r -o mach_dep.o md_tmp.o hpux_test_and_clear.o

./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c

mark_rts.o: $(srcdir)/mark_rts.c if_mach if_not_there $(UTILS)

mark_rts.o: $(srcdir)/mark_rts.c $(UTILS)

rm -f mark_rts.o

-./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c

./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c

Line 303 cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCL

Line 334 cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCL

cord/cordtest: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS)

rm -f cord/cordtest

./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb

./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld

./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld `./threadlibs`

./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`

cord/de: $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)

rm -f cord/de

./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`

./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld

./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld `./threadlibs`

./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses

./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`

./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses

./if_mach M68K AMIGA $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses

./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs`

if_mach: $(srcdir)/if_mach.c $(srcdir)/gcconfig.h

Line 330 clean:

Line 362 clean:

threadlibs $(CORD_OBJS) cord/cordtest cord/de

-rm -f *~

gctest: test.o gc.a if_mach if_not_there

gctest: test.o gc.a $(UTILS)

rm -f gctest

./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest test.o gc.a -lucb

./if_mach HP_PA "" $(CC) $(CFLAGS) -o gctest test.o gc.a -ldld

./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o gctest test.o gc.a -ldld `./threadlibs`

./if_not_there gctest $(CC) $(CFLAGS) -o gctest test.o gc.a `./threadlibs`

# If an optimized setjmp_test generates a segmentation fault,

# odds are your compiler is broken. Gctest may still work.

# Try compiling setjmp_t.c unoptimized.

setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/gc.h if_mach if_not_there

setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/gc.h $(UTILS)

$(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c

test: KandRtest cord/cordtest

Line 355 add_gc_prefix: add_gc_prefix.c

Line 387 add_gc_prefix: add_gc_prefix.c

gc.tar: $(SRCS) $(OTHER_FILES) add_gc_prefix

./add_gc_prefix $(SRCS) $(OTHER_FILES) > /tmp/gc.tar-files

(cd $(srcdir)/.. ; tar cvfh - `cat /tmp/gc.tar-files`) > gc.tar

tar cvfh gc.tar `cat /tmp/gc.tar-files`

pc_gc.tar: $(SRCS) $(OTHER_FILES)

tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES)

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>