===================================================================
RCS file: /home/cvs/OpenXM_contrib/gc/Attic/Makefile,v
retrieving revision 1.1.1.1
retrieving revision 1.1.1.2
diff -u -p -r1.1.1.1 -r1.1.1.2
--- OpenXM_contrib/gc/Attic/Makefile	1999/11/27 10:58:31	1.1.1.1
+++ OpenXM_contrib/gc/Attic/Makefile	2000/04/14 11:08:00	1.1.1.2
@@ -7,10 +7,10 @@
 #      	 and runs some tests of collector and cords.  Does not add cords or
 #	 c++ interface to gc.a
 # cord/de - builds dumb editor based on cords.
-ABI_FLAG=
-CC=gcc $(ABI_FLAG)
-CXX=CC $(ABI_FLAG)
-AS=gcc -c -x assembler-with-cpp $(ABI_FLAG)
+ABI_FLAG= 
+CC=cc $(ABI_FLAG)
+CXX=g++ $(ABI_FLAG)
+AS=as $(ABI_FLAG)
 #  The above doesn't work with gas, which doesn't run cpp.
 #  Define AS as `gcc -c -x assembler-with-cpp' instead.
 #  Under Irix 6, you will have to specify the ABI (-o32, -n32, or -64)
@@ -24,10 +24,8 @@ CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EX
 # Setjmp_test may yield overly optimistic results when compiled
 # without optimization.
 # -DSILENT disables statistics printing, and improves performance.
-# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
-#   altered stubborn objects, at substantial performance cost.
-#   Use only for incremental collector debugging.
-# -DFIND_LEAK causes the collector to assume that all inaccessible
+# -DFIND_LEAK causes GC_find_leak to be initially set.
+#   This causes the collector to assume that all inaccessible
 #   objects should have been explicitly deallocated, and reports exceptions.
 #   Finalization and the test program are not usable in this mode.
 # -DSOLARIS_THREADS enables support for Solaris (thr_) threads.
@@ -37,6 +35,8 @@ CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EX
 # -D_SOLARIS_PTHREADS enables support for Solaris pthreads.
 #   Define SOLARIS_THREADS as well.
 # -DIRIX_THREADS enables support for Irix pthreads.  See README.irix.
+# -DHPUX_THREADS enables support for HP/UX 11 pthreads.
+#  Also requires -D_REENTRANT. See README.hp.
 # -DLINUX_THREADS enables support for Xavier Leroy's Linux threads.
 #   see README.linux.  -D_REENTRANT may also be required.
 # -DALL_INTERIOR_POINTERS allows all pointers to the interior
@@ -85,9 +85,12 @@ CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EX
 #   finalize.c).  Objects reachable from finalizable objects will be marked
 #   in a sepearte postpass, and hence their memory won't be reclaimed.
 #   Not recommended unless you are implementing a language that specifies
-#   these semantics.
+#   these semantics.  Since 5.0, determines only only the initial value
+#   of GC_java_finalization variable.
 # -DFINALIZE_ON_DEMAND causes finalizers to be run only in response
 #   to explicit GC_invoke_finalizers() calls.
+#   In 5.0 this became runtime adjustable, and this only determines the
+#   initial value of GC_finalize_on_demand.
 # -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.
 #   This is useful if either the vendor malloc implementation is poor,
 #   or if REDIRECT_MALLOC is used.
@@ -98,6 +101,10 @@ CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EX
 #   fragmentation, but generally better performance for large heaps.
 # -DUSE_MMAP use MMAP instead of sbrk to get new memory.
 #   Works for Solaris and Irix.
+# -DUSE_MUNMAP causes memory to be returned to the OS under the right
+#   circumstances.  This currently disables VM-based incremental collection.
+#   This is currently experimental, and works only under some Unix and
+#   Linux versions.
 # -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than
 #   GC_scratch_alloc() to get stack memory.
 # -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever
@@ -109,12 +116,25 @@ CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EX
 #   allocation strategy.  The new strategy tries harder to minimize
 #   fragmentation, sometimes at the expense of spending more time in the
 #   large block allocator and/or collecting more frequently.
-#   If you expect the allocator to promtly use an explicitly expanded
+#   If you expect the allocator to promptly use an explicitly expanded
 #   heap, this is highly recommended.
+# -DKEEP_BACK_PTRS Add code to save back pointers in debugging headers
+#   for objects allocated with the debugging allocator.  If all objects
+#   through GC_MALLOC with GC_DEBUG defined, this allows the client
+#   to determine how particular or randomly chosen objects are reachable
+#   for debugging/profiling purposes.  The backptr.h interface is
+#   implemented only if this is defined.
+# -DGC_ASSERTIONS Enable some internal GC assertion checking.  Currently
+#   this facility is only used in a few places.  It is intended primarily
+#   for debugging of the garbage collector itself, but could also
+#   occasionally be useful for debugging of client code.  Slows down the
+#   collector somewhat, but not drastically.
+# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
+#   altered stubborn objects, at substantial performance cost.
+#   Use only for debugging of the incremental collector.
 #
 
 
-
 LIBGC_CFLAGS= -O -DNO_SIGNALS -DSILENT \
     -DREDIRECT_MALLOC=GC_malloc_uncollectable \
     -DDONT_ADD_BYTE_AT_END -DALL_INTERIOR_POINTERS
@@ -131,9 +151,9 @@ RANLIB= ranlib
 srcdir = .
 VPATH = $(srcdir)
 
-OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o
+OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o hpux_irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o
 
-CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c
+CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c hpux_irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c
 
 CORD_SRCS=  cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c cord/cord.h cord/ec.h cord/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC cord/SCOPTIONS.amiga cord/SMakefile.amiga
 
@@ -145,7 +165,7 @@ SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s a
     threadlibs.c if_mach.c if_not_there.c gc_cpp.cc gc_cpp.h weakpointer.h \
     gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h gc_alloc.h \
     include/new_gc_alloc.h include/javaxfc.h sparc_sunos4_mach_dep.s \
-    solaris_threads.h $(CORD_SRCS)
+    solaris_threads.h backptr.h hpux_test_and_clear.s $(CORD_SRCS)
 
 OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAKEFILE BCC_MAKEFILE \
            README test.c test_cpp.cc setjmp_t.c SMakefile.amiga \
@@ -153,7 +173,7 @@ OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAK
            cord/gc.h include/gc.h include/gc_typed.h include/cord.h \
            include/ec.h include/private/cord_pos.h include/private/gcconfig.h \
            include/private/gc_hdrs.h include/private/gc_priv.h \
-	   include/gc_cpp.h README.rs6000 \
+	   include/gc_cpp.h README.rs6000 include/backptr.h \
            include/weakpointer.h README.QUICK callprocs pc_excludes \
            barrett_diagram README.OS2 README.Mac MacProjects.sit.hqx \
            MacOS.c EMX_MAKEFILE makefile.depend README.debugging \
@@ -162,7 +182,8 @@ OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAK
            add_gc_prefix.c README.solaris2 README.sgi README.hp README.uts \
 	   win32_threads.c NT_THREADS_MAKEFILE gc.mak README.dj Makefile.dj \
 	   README.alpha README.linux version.h Makefile.DLLs \
-	   WCC_MAKEFILE
+	   WCC_MAKEFILE nursery.c include/gc_nursery.h include/gc_copy_descr.h \
+	   include/leak_detector.h
 
 CORD_INCLUDE_FILES= $(srcdir)/gc.h $(srcdir)/cord/cord.h $(srcdir)/cord/ec.h \
            $(srcdir)/cord/private/cord_pos.h
@@ -199,19 +220,23 @@ mark.o typd_mlc.o finalize.o: $(srcdir)/gc_mark.h
 
 base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
 	echo > base_lib
-	rm -f on_sparc_sunos5_1
-	./if_mach SPARC SUNOS5 touch on_sparc_sunos5_1
+	rm -f dont_ar_1
+	./if_mach SPARC SUNOS5 touch dont_ar_1
 	./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o
-	./if_not_there on_sparc_sunos5_1 $(AR) ru gc.a $(OBJS) dyn_load.o
-	./if_not_there on_sparc_sunos5_1 $(RANLIB) gc.a || cat /dev/null
+	./if_mach M68K AMIGA touch dont_ar_1
+	./if_mach M68K AMIGA $(AR) -vrus gc.a $(OBJS) dyn_load.o
+	./if_not_there dont_ar_1 $(AR) ru gc.a $(OBJS) dyn_load.o
+	./if_not_there dont_ar_1 $(RANLIB) gc.a || cat /dev/null
 #	ignore ranlib failure; that usually means it doesn't exist, and isn't needed
 
 cords: $(CORD_OBJS) cord/cordtest $(UTILS)
-	rm -f on_sparc_sunos5_3
-	./if_mach SPARC SUNOS5 touch on_sparc_sunos5_3
+	rm -f dont_ar_3
+	./if_mach SPARC SUNOS5 touch dont_ar_3
 	./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS)
-	./if_not_there on_sparc_sunos5_3 $(AR) ru gc.a $(CORD_OBJS)
-	./if_not_there on_sparc_sunos5_3 $(RANLIB) gc.a || cat /dev/null
+	./if_mach M68K AMIGA touch dont_ar_3
+	./if_mach M68K AMIGA $(AR) -vrus gc.a $(CORD_OBJS)
+	./if_not_there dont_ar_3 $(AR) ru gc.a $(CORD_OBJS)
+	./if_not_there dont_ar_3 $(RANLIB) gc.a || cat /dev/null
 
 gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/gc_cpp.h $(srcdir)/gc.h Makefile
 	$(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
@@ -219,15 +244,17 @@ gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/gc_cpp.h $(src
 test_cpp: $(srcdir)/test_cpp.cc $(srcdir)/gc_cpp.h gc_cpp.o $(srcdir)/gc.h \
 base_lib $(UTILS)
 	rm -f test_cpp
-	./if_mach HP_PA "" $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a -ldld
+	./if_mach HP_PA HPUX $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a -ldld `./threadlibs`
 	./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a `./threadlibs`
 
 c++: gc_cpp.o $(srcdir)/gc_cpp.h test_cpp
-	rm -f on_sparc_sunos5_4
-	./if_mach SPARC SUNOS5 touch on_sparc_sunos5_4
+	rm -f dont_ar_4
+	./if_mach SPARC SUNOS5 touch dont_ar_4
 	./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o
-	./if_not_there on_sparc_sunos5_4 $(AR) ru gc.a gc_cpp.o
-	./if_not_there on_sparc_sunos5_4 $(RANLIB) gc.a || cat /dev/null
+	./if_mach M68K AMIGA touch dont_ar_4
+	./if_mach M68K AMIGA $(AR) -vrus gc.a gc_cpp.o
+	./if_not_there dont_ar_4 $(AR) ru gc.a gc_cpp.o
+	./if_not_there dont_ar_4 $(RANLIB) gc.a || cat /dev/null
 	./test_cpp 1
 	echo > c++
 
@@ -276,9 +303,13 @@ mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_ma
 	./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.s
 	./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.s
 	./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
+	./if_mach SPARC OPENBSD $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
+	./if_mach HP_PA HPUX $(AS) -o hpux_test_and_clear.o $(srcdir)/hpux_test_and_clear.s
+	./if_mach HP_PA HPUX $(CC) -c -o md_tmp.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
+	./if_mach HP_PA HPUX ld -r -o mach_dep.o md_tmp.o hpux_test_and_clear.o
 	./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
 
-mark_rts.o: $(srcdir)/mark_rts.c if_mach if_not_there $(UTILS)
+mark_rts.o: $(srcdir)/mark_rts.c $(UTILS)
 	rm -f mark_rts.o
 	-./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
 	./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
@@ -303,16 +334,17 @@ cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCL
 cord/cordtest: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS)
 	rm -f cord/cordtest
 	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
-	./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld
+	./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld `./threadlibs`
 	./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
 
 cord/de: $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
 	rm -f cord/de
 	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
-	./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld
+	./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld `./threadlibs`
 	./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
 	./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
 	./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
+	./if_mach M68K AMIGA $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
 	./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs`
 
 if_mach: $(srcdir)/if_mach.c $(srcdir)/gcconfig.h
@@ -330,16 +362,16 @@ clean: 
 	      threadlibs $(CORD_OBJS) cord/cordtest cord/de
 	-rm -f *~
 
-gctest: test.o gc.a if_mach if_not_there
+gctest: test.o gc.a $(UTILS)
 	rm -f gctest
 	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest  test.o gc.a -lucb
-	./if_mach HP_PA "" $(CC) $(CFLAGS) -o gctest  test.o gc.a -ldld
+	./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o gctest  test.o gc.a -ldld `./threadlibs`
 	./if_not_there gctest $(CC) $(CFLAGS) -o gctest test.o gc.a `./threadlibs`
 
 # If an optimized setjmp_test generates a segmentation fault,
 # odds are your compiler is broken.  Gctest may still work.
 # Try compiling setjmp_t.c unoptimized.
-setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/gc.h if_mach if_not_there
+setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/gc.h $(UTILS)
 	$(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c
 
 test:  KandRtest cord/cordtest
@@ -355,7 +387,7 @@ add_gc_prefix: add_gc_prefix.c
 
 gc.tar: $(SRCS) $(OTHER_FILES) add_gc_prefix
 	./add_gc_prefix $(SRCS) $(OTHER_FILES) > /tmp/gc.tar-files
-	(cd $(srcdir)/.. ; tar cvfh - `cat /tmp/gc.tar-files`) > gc.tar
+	tar cvfh gc.tar `cat /tmp/gc.tar-files`
 
 pc_gc.tar: $(SRCS) $(OTHER_FILES)
 	tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES)