Annotation of OpenXM_contrib/gc/Makefile.dj, Revision 1.1.1.1
1.1 maekawa 1: # Primary targets:
2: # gc.a - builds basic library
3: # libgc.a - builds library for use with g++ "-fgc-keyword" extension
4: # c++ - adds C++ interface to library
5: # cords - adds cords (heavyweight strings) to library
6: # test - prints porting information, then builds basic version of gc.a,
7: # and runs some tests of collector and cords. Does not add cords or
8: # c++ interface to gc.a
9: # cord/de$(EXE_SUFFIX) - builds dumb editor based on cords.
10: ABI_FLAG=
11: CC=gcc $(ABI_FLAG)
12: CXX=gxx $(ABI_FLAG)
13: AS=gcc -c -x assembler-with-cpp $(ABI_FLAG)
14: # The above doesn't work with gas, which doesn't run cpp.
15: # Define AS as `gcc -c -x assembler-with-cpp' instead.
16: # Under Irix 6, you will have to specify the ABI (-o32, -n32, or -64)
17: # if you use something other than the default ABI on your machine.
18:
19: # special defines for DJGPP
20: CXXLD=gxx $(ABI_FLAG)
21: EXE_SUFFIX=.exe
22:
23: CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DALL_INTERIOR_POINTERS -DNO_EXECUTE_PERMISSION -DSILENT
24:
25: # For dynamic library builds, it may be necessary to add flags to generate
26: # PIC code, e.g. -fPIC on Linux.
27:
28: # Setjmp_test may yield overly optimistic results when compiled
29: # without optimization.
30: # -DSILENT disables statistics printing, and improves performance.
31: # -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
32: # altered stubborn objects, at substantial performance cost.
33: # Use only for incremental collector debugging.
34: # -DFIND_LEAK causes the collector to assume that all inaccessible
35: # objects should have been explicitly deallocated, and reports exceptions.
36: # Finalization and the test program are not usable in this mode.
37: # -DSOLARIS_THREADS enables support for Solaris (thr_) threads.
38: # (Clients should also define SOLARIS_THREADS and then include
39: # gc.h before performing thr_ or dl* or GC_ operations.)
40: # Must also define -D_REENTRANT.
41: # -D_SOLARIS_PTHREADS enables support for Solaris pthreads.
42: # Define SOLARIS_THREADS as well.
43: # -DIRIX_THREADS enables support for Irix pthreads. See README.irix.
44: # -DLINUX_THREADS enables support for Xavier Leroy's Linux threads.
45: # see README.linux. -D_REENTRANT may also be required.
46: # -DALL_INTERIOR_POINTERS allows all pointers to the interior
47: # of objects to be recognized. (See gc_priv.h for consequences.)
48: # -DSMALL_CONFIG tries to tune the collector for small heap sizes,
49: # usually causing it to use less space in such situations.
50: # Incremental collection no longer works in this case.
51: # -DLARGE_CONFIG tunes the collector for unusually large heaps.
52: # Necessary for heaps larger than about 500 MB on most machines.
53: # Recommended for heaps larger than about 64 MB.
54: # -DDONT_ADD_BYTE_AT_END is meaningful only with
55: # -DALL_INTERIOR_POINTERS. Normally -DALL_INTERIOR_POINTERS
56: # causes all objects to be padded so that pointers just past the end of
57: # an object can be recognized. This can be expensive. (The padding
58: # is normally more than one byte due to alignment constraints.)
59: # -DDONT_ADD_BYTE_AT_END disables the padding.
60: # -DNO_SIGNALS does not disable signals during critical parts of
61: # the GC process. This is no less correct than many malloc
62: # implementations, and it sometimes has a significant performance
63: # impact. However, it is dangerous for many not-quite-ANSI C
64: # programs that call things like printf in asynchronous signal handlers.
65: # -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not
66: # have execute permission, i.e. it may be impossible to execute
67: # code from the heap. Currently this only affects the incremental
68: # collector on UNIX machines. It may greatly improve its performance,
69: # since this may avoid some expensive cache synchronization.
70: # -DOPERATOR_NEW_ARRAY declares that the C++ compiler supports the
71: # new syntax "operator new[]" for allocating and deleting arrays.
72: # See gc_cpp.h for details. No effect on the C part of the collector.
73: # This is defined implicitly in a few environments.
74: # -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be defined
75: # as aliases for X, GC_realloc, and GC_free, respectively.
76: # Calloc is redefined in terms of the new malloc. X should
77: # be either GC_malloc or GC_malloc_uncollectable.
78: # The former is occasionally useful for working around leaks in code
79: # you don't want to (or can't) look at. It may not work for
80: # existing code, but it often does. Neither works on all platforms,
81: # since some ports use malloc or calloc to obtain system memory.
82: # (Probably works for UNIX, and win32.)
83: # -DIGNORE_FREE turns calls to free into a noop. Only useful with
84: # -DREDIRECT_MALLOC.
85: # -DNO_DEBUGGING removes GC_dump and the debugging routines it calls.
86: # Reduces code size slightly at the expense of debuggability.
87: # -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of
88: # order by specifying a nonstandard finalization mark procedure (see
89: # finalize.c). Objects reachable from finalizable objects will be marked
90: # in a sepearte postpass, and hence their memory won't be reclaimed.
91: # Not recommended unless you are implementing a language that specifies
92: # these semantics.
93: # -DFINALIZE_ON_DEMAND causes finalizers to be run only in response
94: # to explicit GC_invoke_finalizers() calls.
95: # -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.
96: # This is useful if either the vendor malloc implementation is poor,
97: # or if REDIRECT_MALLOC is used.
98: # -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly
99: # sets the heap block size. Each heap block is devoted to a single size and
100: # kind of object. For the incremental collector it makes sense to match
101: # the most likely page size. Otherwise large values result in more
102: # fragmentation, but generally better performance for large heaps.
103: # -DUSE_MMAP use MMAP instead of sbrk to get new memory.
104: # Works for Solaris and Irix.
105: # -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than
106: # GC_scratch_alloc() to get stack memory.
107: # -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever
108: # the garbage collector detects a value that looks almost, but not quite,
109: # like a pointer, print both the address containing the value, and the
110: # value of the near-bogus-pointer. Can be used to identifiy regions of
111: # memory that are likely to contribute misidentified pointers.
112: # -DOLD_BLOCK_ALLOC Use the old, possibly faster, large block
113: # allocation strategy. The new strategy tries harder to minimize
114: # fragmentation, sometimes at the expense of spending more time in the
115: # large block allocator and/or collecting more frequently.
116: # If you expect the allocator to promtly use an explicitly expanded
117: # heap, this is highly recommended.
118: #
119:
120:
121:
122: LIBGC_CFLAGS= -O -DNO_SIGNALS -DSILENT \
123: -DREDIRECT_MALLOC=GC_malloc_uncollectable \
124: -DDONT_ADD_BYTE_AT_END -DALL_INTERIOR_POINTERS
125: # Flags for building libgc.a -- the last two are required.
126:
127: CXXFLAGS= $(CFLAGS) -DOPERATOR_NEW_ARRAY
128: AR= ar
129: RANLIB= ranlib
130:
131:
132: # Redefining srcdir allows object code for the nonPCR version of the collector
133: # to be generated in different directories. In this case, the destination directory
134: # should contain a copy of the original include directory.
135: srcdir = .
136: VPATH = $(srcdir)
137:
138: OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o
139:
140: CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c
141:
142: CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c cord/cord.h cord/ec.h cord/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC cord/SCOPTIONS.amiga cord/SMakefile.amiga
143:
144: CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
145:
146: SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.s \
147: sparc_mach_dep.s gc.h gc_typed.h gc_hdrs.h gc_priv.h gc_private.h \
148: gcconfig.h gc_mark.h include/gc_inl.h include/gc_inline.h gc.man \
149: threadlibs.c if_mach.c if_not_there.c gc_cpp.cc gc_cpp.h weakpointer.h \
150: gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h gc_alloc.h \
151: include/new_gc_alloc.h include/javaxfc.h sparc_sunos4_mach_dep.s \
152: solaris_threads.h $(CORD_SRCS)
153:
154: OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAKEFILE BCC_MAKEFILE \
155: README test.c test_cpp.cc setjmp_t.c SMakefile.amiga \
156: SCoptions.amiga README.amiga README.win32 cord/README \
157: cord/gc.h include/gc.h include/gc_typed.h include/cord.h \
158: include/ec.h include/private/cord_pos.h include/private/gcconfig.h \
159: include/private/gc_hdrs.h include/private/gc_priv.h \
160: include/gc_cpp.h README.rs6000 \
161: include/weakpointer.h README.QUICK callprocs pc_excludes \
162: barrett_diagram README.OS2 README.Mac MacProjects.sit.hqx \
163: MacOS.c EMX_MAKEFILE makefile.depend README.debugging \
164: include/gc_cpp.h Mac_files/datastart.c Mac_files/dataend.c \
165: Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
166: add_gc_prefix.c README.solaris2 README.sgi README.hp README.uts \
167: win32_threads.c NT_THREADS_MAKEFILE gc.mak README.dj Makefile.dj \
168: README.alpha README.linux version.h Makefile.DLLs \
169: WCC_MAKEFILE
170:
171: CORD_INCLUDE_FILES= $(srcdir)/gc.h $(srcdir)/cord/cord.h $(srcdir)/cord/ec.h \
172: $(srcdir)/cord/private/cord_pos.h
173:
174: UTILS= if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX)
175:
176: # Libraries needed for curses applications. Only needed for de.
177: CURSES= -lcurses -ltermlib
178:
179: # The following is irrelevant on most systems. But a few
180: # versions of make otherwise fork the shell specified in
181: # the SHELL environment variable.
182: SHELL= /bin/sh
183:
184: SPECIALCFLAGS =
185: # Alternative flags to the C compiler for mach_dep.c.
186: # Mach_dep.c often doesn't like optimization, and it's
187: # not time-critical anyway.
188: # Set SPECIALCFLAGS to -q nodirect_code on Encore.
189:
190: all: gc.a gctest$(EXE_SUFFIX)
191:
192: pcr: PCR-Makefile gc_private.h gc_hdrs.h gc.h gcconfig.h mach_dep.o $(SRCS)
193: make -f PCR-Makefile depend
194: make -f PCR-Makefile
195:
196: $(OBJS) test.o dyn_load.o dyn_load_sunos53.o: $(srcdir)/gc_priv.h $(srcdir)/gc_hdrs.h $(srcdir)/gc.h \
197: $(srcdir)/gcconfig.h $(srcdir)/gc_typed.h Makefile
198: # The dependency on Makefile is needed. Changing
199: # options such as -DSILENT affects the size of GC_arrays,
200: # invalidating all .o files that rely on gc_priv.h
201:
202: mark.o typd_mlc.o finalize.o: $(srcdir)/gc_mark.h
203:
204: base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
205: echo > base_lib
206: rm -f on_sparc_sunos5_1
207: ./if_mach SPARC SUNOS5 touch on_sparc_sunos5_1
208: ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o
209: ./if_not_there on_sparc_sunos5_1 $(AR) ru gc.a $(OBJS) dyn_load.o
210: -./if_not_there on_sparc_sunos5_1 $(RANLIB) gc.a
211: # ignore ranlib failure; that usually means it doesn't exist, and isn't needed
212:
213: cords: $(CORD_OBJS) cord/cordtest$(EXE_SUFFIX) $(UTILS)
214: rm -f on_sparc_sunos5_3
215: ./if_mach SPARC SUNOS5 touch on_sparc_sunos5_3
216: ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS)
217: ./if_not_there on_sparc_sunos5_3 $(AR) ru gc.a $(CORD_OBJS)
218: -./if_not_there on_sparc_sunos5_3 $(RANLIB) gc.a
219:
220: gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/gc_cpp.h $(srcdir)/gc.h Makefile
221: $(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
222:
223: test_cpp$(EXE_SUFFIX): $(srcdir)/test_cpp.cc $(srcdir)/gc_cpp.h gc_cpp.o $(srcdir)/gc.h \
224: base_lib $(UTILS)
225: rm -f test_cpp test_cpp$(EXE_SUFFIX)
226: ./if_mach HP_PA "" $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a -ldld
227: ./if_not_there test_cpp$(EXE_SUFFIX) $(CXXLD) $(CXXFLAGS) -o test_cpp$(EXE_SUFFIX) $(srcdir)/test_cpp.cc gc_cpp.o gc.a
228: rm -f test_cpp
229:
230: c++: gc_cpp.o $(srcdir)/gc_cpp.h test_cpp$(EXE_SUFFIX)
231: rm -f on_sparc_sunos5_4
232: ./if_mach SPARC SUNOS5 touch on_sparc_sunos5_4
233: ./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o
234: ./if_not_there on_sparc_sunos5_4 $(AR) ru gc.a gc_cpp.o
235: -./if_not_there on_sparc_sunos5_4 $(RANLIB) gc.a
236: ./test_cpp$(EXE_SUFFIX) 1
237: echo > c++
238:
239: dyn_load_sunos53.o: dyn_load.c
240: $(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
241:
242: # SunOS5 shared library version of the collector
243: sunos5gc.so: $(OBJS) dyn_load_sunos53.o
244: $(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o -ldl
245: ln sunos5gc.so libgc.so
246:
247: # Alpha/OSF shared library version of the collector
248: libalphagc.so: $(OBJS)
249: ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
250: ln libalphagc.so libgc.so
251:
252: # IRIX shared library version of the collector
253: libirixgc.so: $(OBJS) dyn_load.o
254: ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
255: ln libirixgc.so libgc.so
256:
257: # Linux shared library version of the collector
258: liblinuxgc.so: $(OBJS) dyn_load.o
259: gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o -lo
260: ln liblinuxgc.so libgc.so
261:
262: mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s $(srcdir)/mips_ultrix_mach_dep.s $(srcdir)/rs6000_mach_dep.s $(UTILS)
263: rm -f mach_dep.o
264: ./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.s
265: ./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
266: ./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
267: ./if_mach RS6000 "" $(AS) -o mach_dep.o $(srcdir)/rs6000_mach_dep.s
268: ./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.s
269: ./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.s
270: ./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
271: ./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
272:
273: mark_rts.o: $(srcdir)/mark_rts.c if_mach if_not_there $(UTILS)
274: rm -f mark_rts.o
275: -./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
276: ./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
277: # Work-around for DEC optimizer tail recursion elimination bug.
278: # The ALPHA-specific line should be removed if gcc is used.
279:
280: alloc.o: version.h
281:
282: cord/cordbscs.o: $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
283: $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
284: mv cordbscs.o cord/cordbscs.o
285: # not all compilers understand -o filename
286:
287: cord/cordxtra.o: $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
288: $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
289: mv cordxtra.o cord/cordxtra.o
290:
291: cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
292: $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
293: mv cordprnt.o cord/cordprnt.o
294:
295: cord/cordtest$(EXE_SUFFIX): $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS) /tmp
296: rm -f cord/cordtest$(EXE_SUFFIX)
297: ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest$(EXE_SUFFIX) $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
298: ./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/cordtest$(EXE_SUFFIX) $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld
299: ./if_not_there cord/cordtest$(EXE_SUFFIX) $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a
300: rm -f cord/cordtest cordtest
301: -mv cordtest$(EXE_SUFFIX) cord/
302:
303: /tmp: $(UTILS)
304: ./if_not_there /tmp mkdir /tmp
305:
306: cord/de$(EXE_SUFFIX): $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
307: rm -f cord/de cord/de$(EXE_SUFFIX)
308: ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
309: ./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld
310: ./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
311: ./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
312: ./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
313: ./if_not_there cord/de$(EXE_SUFFIX) $(CC) $(CFLAGS) -o cord/de$(EXE_SUFFIX) $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES)
314:
315: if_mach$(EXE_SUFFIX): $(srcdir)/if_mach.c $(srcdir)/gcconfig.h
316: rm -f if_mach if_mach$(EXE_SUFFIX)
317: $(CC) $(CFLAGS) -o if_mach $(srcdir)/if_mach.c
318: rm -f if_mach
319:
320: threadlibs$(EXE_SUFFIX): $(srcdir)/threadlibs.c $(srcdir)/gcconfig.h Makefile
321: rm -f threadlibs threadlibs$(EXE_SUFFIX)
322: $(CC) $(CFLAGS) -o threadlibs $(srcdir)/threadlibs.c
323: rm -f threadlibs
324:
325: if_not_there$(EXE_SUFFIX): $(srcdir)/if_not_there.c
326: rm -f if_not_there if_not_there$(EXE_SUFFIX)
327: $(CC) $(CFLAGS) -o if_not_there $(srcdir)/if_not_there.c
328: rm -f if_not_there
329:
330: # Clean removes *.o several times,
331: # because as the first one doesn't seem to get them all!
332: clean:
333: rm -f gc.a *.o
334: rm -f *.o
335: rm -f *.o
336: rm -f cord/*.o
337: rm -f gctest gctest_dyn_link test_cpp
338: rm -f setjmp_test mon.out gmon.out a.out core if_not_there if_mach
339: rm -f threadlibs $(CORD_OBJS) cordtest cord/cordtest de cord/de
340: rm -f gctest$(EXE_SUFFIX) gctest_dyn_link$(EXE_SUFFIX) test_cpp$(EXE_SUFFIX)
341: rm -f setjmp_test$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX) if_mach$(EXE_SUFFIX)
342: rm -f threadlibs$(EXE_SUFFIX) cord/cordtest$(EXE_SUFFIX)
343: -rm -f *~
344:
345: gctest$(EXE_SUFFIX): test.o gc.a if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX)
346: rm -f gctest gctest$(EXE_SUFFIX)
347: ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest test.o gc.a -lucb
348: ./if_mach HP_PA "" $(CC) $(CFLAGS) -o gctest test.o gc.a -ldld
349: ./if_not_there gctest$(EXE_SUFFIX) $(CC) $(CFLAGS) -o gctest$(EXE_SUFFIX) test.o gc.a
350: rm -f gctest
351:
352: # If an optimized setjmp_test generates a segmentation fault,
353: # odds are your compiler is broken. Gctest may still work.
354: # Try compiling setjmp_t.c unoptimized.
355: setjmp_test$(EXE_SUFFIX): $(srcdir)/setjmp_t.c $(srcdir)/gc.h \
356: if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX)
357: rm -f setjmp_test$(EXE_SUFFIX)
358: $(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c
359: rm -f setjmp_test
360:
361: test: KandRtest cord/cordtest$(EXE_SUFFIX)
362: ./cord/cordtest$(EXE_SUFFIX)
363:
364: # Those tests that work even with a K&R C compiler:
365: KandRtest: setjmp_test$(EXE_SUFFIX) gctest$(EXE_SUFFIX)
366: ./setjmp_test$(EXE_SUFFIX)
367: ./gctest$(EXE_SUFFIX)
368:
369: add_gc_prefix$(EXE_SUFFIX): add_gc_prefix.c
370: $(CC) -o add_gc_prefix$(EXE_SUFFIX) $(srcdir)/add_gc_prefix.c
371: rm -f add_gc_prefix
372:
373: gc.tar: $(SRCS) $(OTHER_FILES) add_gc_prefix
374: ./add_gc_prefix$(EXE_SUFFIX) $(SRCS) $(OTHER_FILES) > /tmp/gc.tar-files
375: (cd $(srcdir)/.. ; tar cvfh - `cat /tmp/gc.tar-files`) > gc.tar
376:
377: pc_gc.tar: $(SRCS) $(OTHER_FILES)
378: tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES)
379:
380: floppy: pc_gc.tar
381: -mmd a:/cord
382: -mmd a:/cord/private
383: -mmd a:/include
384: -mmd a:/include/private
385: mkdir /tmp/pc_gc
386: cat pc_gc.tar | (cd /tmp/pc_gc; tar xvf -)
387: -mcopy -tmn /tmp/pc_gc/* a:
388: -mcopy -tmn /tmp/pc_gc/cord/* a:/cord
389: -mcopy -mn /tmp/pc_gc/cord/de_win.ICO a:/cord
390: -mcopy -tmn /tmp/pc_gc/cord/private/* a:/cord/private
391: -mcopy -tmn /tmp/pc_gc/include/* a:/include
392: -mcopy -tmn /tmp/pc_gc/include/private/* a:/include/private
393: rm -r /tmp/pc_gc
394:
395: gc.tar.Z: gc.tar
396: compress gc.tar
397:
398: gc.tar.gz: gc.tar
399: gzip gc.tar
400:
401: lint: $(CSRCS) test.c
402: lint -DLINT $(CSRCS) test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall"
403:
404: # BTL: added to test shared library version of collector.
405: # Currently works only under SunOS5. Requires GC_INIT call from statically
406: # loaded client code.
407: ABSDIR = `pwd`
408: gctest_dyn_link: test.o libgc.so
409: $(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link test.o -lgc -ldl -lthread
410:
411: gctest_irix_dyn_link: test.o libirixgc.so
412: $(CC) -L$(ABSDIR) -o gctest_irix_dyn_link test.o -lirixgc
413:
414: test_dll.o: test.c libgc_globals.h
415: $(CC) $(CFLAGS) -DGC_USE_DLL -c test.c -o test_dll.o
416:
417: test_dll: test_dll.o libgc_dll.a libgc.dll
418: $(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll
419:
420: SYM_PREFIX-libgc=GC
421:
422: # Uncomment the following line to build a GNU win32 DLL
423: # include Makefile.DLLs
424:
425: reserved_namespace: $(SRCS)
426: for file in $(SRCS) test.c test_cpp.cc; do \
427: sed s/GC_/_GC_/g < $$file > tmp; \
428: cp tmp $$file; \
429: done
430:
431: user_namespace: $(SRCS)
432: for file in $(SRCS) test.c test_cpp.cc; do \
433: sed s/_GC_/GC_/g < $$file > tmp; \
434: cp tmp $$file; \
435: done
436:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.dj CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM_contrib / gc