Annotation of OpenXM_contrib/gc/include/private/gcconfig.h, Revision 1.1.1.2
1.1 maekawa 1: /*
2: * Copyright 1988, 1989 Hans-J. Boehm, Alan J. Demers
3: * Copyright (c) 1991-1994 by Xerox Corporation. All rights reserved.
4: * Copyright (c) 1996 by Silicon Graphics. All rights reserved.
5: *
6: * THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
7: * OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
8: *
9: * Permission is hereby granted to use or copy this program
10: * for any purpose, provided the above notices are retained on all copies.
11: * Permission to modify the code and to distribute modified code is granted,
12: * provided the above notices are retained, and a notice that the code was
13: * modified is included with the above copyright notice.
14: */
15:
16: #ifndef CONFIG_H
17:
18: # define CONFIG_H
19:
20: /* Machine dependent parameters. Some tuning parameters can be found */
21: /* near the top of gc_private.h. */
22:
23: /* Machine specific parts contributed by various people. See README file. */
24:
25: /* First a unified test for Linux: */
26: # if defined(linux) || defined(__linux__)
27: # define LINUX
28: # endif
29:
30: /* Determine the machine type: */
31: # if defined(sun) && defined(mc68000)
32: # define M68K
33: # define SUNOS4
34: # define mach_type_known
35: # endif
36: # if defined(hp9000s300)
37: # define M68K
38: # define HP
39: # define mach_type_known
40: # endif
41: # if defined(__OpenBSD__) && defined(m68k)
42: # define M68K
43: # define OPENBSD
44: # define mach_type_known
45: # endif
1.1.1.2 ! maekawa 46: # if defined(__OpenBSD__) && defined(__sparc__)
! 47: # define SPARC
! 48: # define OPENBSD
! 49: # define mach_type_known
! 50: # endif
1.1 maekawa 51: # if defined(__NetBSD__) && defined(m68k)
52: # define M68K
53: # define NETBSD
54: # define mach_type_known
55: # endif
56: # if defined(vax)
57: # define VAX
58: # ifdef ultrix
59: # define ULTRIX
60: # else
61: # define BSD
62: # endif
63: # define mach_type_known
64: # endif
65: # if defined(mips) || defined(__mips)
66: # define MIPS
67: # if defined(ultrix) || defined(__ultrix) || defined(__NetBSD__)
68: # define ULTRIX
69: # else
70: # if defined(_SYSTYPE_SVR4) || defined(SYSTYPE_SVR4) || defined(__SYSTYPE_SVR4__)
71: # define IRIX5 /* or IRIX 6.X */
72: # else
73: # define RISCOS /* or IRIX 4.X */
74: # endif
75: # endif
76: # define mach_type_known
77: # endif
78: # if defined(sequent) && defined(i386)
79: # define I386
80: # define SEQUENT
81: # define mach_type_known
82: # endif
83: # if defined(sun) && defined(i386)
84: # define I386
85: # define SUNOS5
86: # define mach_type_known
87: # endif
88: # if (defined(__OS2__) || defined(__EMX__)) && defined(__32BIT__)
89: # define I386
90: # define OS2
91: # define mach_type_known
92: # endif
93: # if defined(ibm032)
94: # define RT
95: # define mach_type_known
96: # endif
97: # if defined(sun) && (defined(sparc) || defined(__sparc))
98: # define SPARC
99: /* Test for SunOS 5.x */
100: # include <errno.h>
101: # ifdef ECHRNG
102: # define SUNOS5
103: # else
104: # define SUNOS4
105: # endif
106: # define mach_type_known
107: # endif
1.1.1.2 ! maekawa 108: # if defined(sparc) && defined(unix) && !defined(sun) && !defined(linux) \
! 109: && !defined(__OpenBSD__)
1.1 maekawa 110: # define SPARC
111: # define DRSNX
112: # define mach_type_known
113: # endif
114: # if defined(_IBMR2)
115: # define RS6000
116: # define mach_type_known
117: # endif
118: # if defined(_M_XENIX) && defined(_M_SYSV) && defined(_M_I386)
119: /* The above test may need refinement */
120: # define I386
121: # if defined(_SCO_ELF)
122: # define SCO_ELF
123: # else
124: # define SCO
125: # endif
126: # define mach_type_known
127: # endif
128: # if defined(_AUX_SOURCE)
129: # define M68K
130: # define SYSV
131: # define mach_type_known
132: # endif
133: # if defined(_PA_RISC1_0) || defined(_PA_RISC1_1) \
134: || defined(hppa) || defined(__hppa__)
135: # define HP_PA
136: # define mach_type_known
137: # endif
1.1.1.2 ! maekawa 138: # if defined(LINUX) && (defined(i386) || defined(__i386__))
1.1 maekawa 139: # define I386
140: # define mach_type_known
141: # endif
142: # if defined(LINUX) && defined(powerpc)
143: # define POWERPC
144: # define mach_type_known
145: # endif
146: # if defined(LINUX) && defined(__mc68000__)
147: # define M68K
148: # define mach_type_known
149: # endif
1.1.1.2 ! maekawa 150: # if defined(LINUX) && defined(sparc)
1.1 maekawa 151: # define SPARC
152: # define mach_type_known
153: # endif
154: # if defined(__alpha) || defined(__alpha__)
155: # define ALPHA
156: # if !defined(LINUX)
157: # define OSF1 /* a.k.a Digital Unix */
158: # endif
159: # define mach_type_known
160: # endif
1.1.1.2 ! maekawa 161: # if defined(_AMIGA) && !defined(AMIGA)
1.1 maekawa 162: # define AMIGA
1.1.1.2 ! maekawa 163: # endif
! 164: # ifdef AMIGA
! 165: # define M68K
1.1 maekawa 166: # define mach_type_known
167: # endif
168: # if defined(THINK_C) || defined(__MWERKS__) && !defined(__powerc)
169: # define M68K
170: # define MACOS
171: # define mach_type_known
172: # endif
173: # if defined(__MWERKS__) && defined(__powerc)
174: # define POWERPC
175: # define MACOS
176: # define mach_type_known
177: # endif
1.1.1.2 ! maekawa 178: # if defined(macosx)
! 179: # define MACOSX
! 180: # define POWERPC
! 181: # define mach_type_known
! 182: # endif
1.1 maekawa 183: # if defined(NeXT) && defined(mc68000)
184: # define M68K
185: # define NEXT
186: # define mach_type_known
187: # endif
188: # if defined(NeXT) && defined(i386)
189: # define I386
190: # define NEXT
191: # define mach_type_known
192: # endif
193: # if defined(__OpenBSD__) && defined(i386)
194: # define I386
195: # define OPENBSD
196: # define mach_type_known
197: # endif
198: # if defined(__FreeBSD__) && defined(i386)
199: # define I386
200: # define FREEBSD
201: # define mach_type_known
202: # endif
203: # if defined(__NetBSD__) && defined(i386)
204: # define I386
205: # define NETBSD
206: # define mach_type_known
207: # endif
208: # if defined(bsdi) && defined(i386)
209: # define I386
210: # define BSDI
211: # define mach_type_known
212: # endif
213: # if !defined(mach_type_known) && defined(__386BSD__)
214: # define I386
215: # define THREE86BSD
216: # define mach_type_known
217: # endif
218: # if defined(_CX_UX) && defined(_M88K)
219: # define M88K
220: # define CX_UX
221: # define mach_type_known
222: # endif
223: # if defined(DGUX)
224: # define M88K
225: /* DGUX defined */
226: # define mach_type_known
227: # endif
228: # if (defined(_MSDOS) || defined(_MSC_VER)) && (_M_IX86 >= 300) \
229: || defined(_WIN32) && !defined(__CYGWIN32__) && !defined(__CYGWIN__)
230: # define I386
231: # define MSWIN32 /* or Win32s */
232: # define mach_type_known
233: # endif
234: # if defined(__DJGPP__)
235: # define I386
236: # ifndef DJGPP
237: # define DJGPP /* MSDOS running the DJGPP port of GCC */
238: # endif
239: # define mach_type_known
240: # endif
241: # if defined(__CYGWIN32__) || defined(__CYGWIN__)
242: # define I386
243: # define CYGWIN32
244: # define mach_type_known
245: # endif
246: # if defined(__BORLANDC__)
247: # define I386
248: # define MSWIN32
249: # define mach_type_known
250: # endif
251: # if defined(_UTS) && !defined(mach_type_known)
252: # define S370
253: # define UTS4
254: # define mach_type_known
255: # endif
256: /* Ivan Demakov */
257: # if defined(__WATCOMC__) && defined(__386__)
258: # define I386
259: # if !defined(OS2) && !defined(MSWIN32) && !defined(DOS4GW)
260: # if defined(__OS2__)
261: # define OS2
262: # else
263: # if defined(__WINDOWS_386__) || defined(__NT__)
264: # define MSWIN32
265: # else
266: # define DOS4GW
267: # endif
268: # endif
269: # endif
270: # define mach_type_known
271: # endif
272:
273: /* Feel free to add more clauses here */
274:
275: /* Or manually define the machine type here. A machine type is */
276: /* characterized by the architecture. Some */
277: /* machine types are further subdivided by OS. */
278: /* the macros ULTRIX, RISCOS, and BSD to distinguish. */
279: /* Note that SGI IRIX is treated identically to RISCOS. */
280: /* SYSV on an M68K actually means A/UX. */
281: /* The distinction in these cases is usually the stack starting address */
282: # ifndef mach_type_known
283: --> unknown machine type
284: # endif
285: /* Mapping is: M68K ==> Motorola 680X0 */
286: /* (SUNOS4,HP,NEXT, and SYSV (A/UX), */
287: /* MACOS and AMIGA variants) */
288: /* I386 ==> Intel 386 */
289: /* (SEQUENT, OS2, SCO, LINUX, NETBSD, */
290: /* FREEBSD, THREE86BSD, MSWIN32, */
291: /* BSDI,SUNOS5, NEXT, other variants) */
292: /* NS32K ==> Encore Multimax */
293: /* MIPS ==> R2000 or R3000 */
294: /* (RISCOS, ULTRIX variants) */
295: /* VAX ==> DEC VAX */
296: /* (BSD, ULTRIX variants) */
297: /* RS6000 ==> IBM RS/6000 AIX3.X */
298: /* RT ==> IBM PC/RT */
299: /* HP_PA ==> HP9000/700 & /800 */
300: /* HP/UX */
301: /* SPARC ==> SPARC under SunOS */
302: /* (SUNOS4, SUNOS5, */
303: /* DRSNX variants) */
304: /* ALPHA ==> DEC Alpha */
305: /* (OSF1 and LINUX variants) */
306: /* M88K ==> Motorola 88XX0 */
307: /* (CX_UX and DGUX) */
308: /* S370 ==> 370-like machine */
309: /* running Amdahl UTS4 */
310:
311:
312: /*
313: * For each architecture and OS, the following need to be defined:
314: *
315: * CPP_WORD_SZ is a simple integer constant representing the word size.
316: * in bits. We assume byte addressibility, where a byte has 8 bits.
317: * We also assume CPP_WORD_SZ is either 32 or 64.
318: * (We care about the length of pointers, not hardware
319: * bus widths. Thus a 64 bit processor with a C compiler that uses
320: * 32 bit pointers should use CPP_WORD_SZ of 32, not 64. Default is 32.)
321: *
322: * MACH_TYPE is a string representation of the machine type.
323: * OS_TYPE is analogous for the OS.
324: *
325: * ALIGNMENT is the largest N, such that
326: * all pointer are guaranteed to be aligned on N byte boundaries.
327: * defining it to be 1 will always work, but perform poorly.
328: *
329: * DATASTART is the beginning of the data segment.
330: * On UNIX systems, the collector will scan the area between DATASTART
331: * and DATAEND for root pointers.
332: *
333: * DATAEND, if not &end.
334: *
335: * ALIGN_DOUBLE of GC_malloc should return blocks aligned to twice
336: * the pointer size.
337: *
338: * STACKBOTTOM is the cool end of the stack, which is usually the
339: * highest address in the stack.
340: * Under PCR or OS/2, we have other ways of finding thread stacks.
341: * For each machine, the following should:
342: * 1) define STACK_GROWS_UP if the stack grows toward higher addresses, and
343: * 2) define exactly one of
344: * STACKBOTTOM (should be defined to be an expression)
345: * HEURISTIC1
346: * HEURISTIC2
347: * If either of the last two macros are defined, then STACKBOTTOM is computed
348: * during collector startup using one of the following two heuristics:
349: * HEURISTIC1: Take an address inside GC_init's frame, and round it up to
350: * the next multiple of STACK_GRAN.
351: * HEURISTIC2: Take an address inside GC_init's frame, increment it repeatedly
352: * in small steps (decrement if STACK_GROWS_UP), and read the value
353: * at each location. Remember the value when the first
354: * Segmentation violation or Bus error is signalled. Round that
355: * to the nearest plausible page boundary, and use that instead
356: * of STACKBOTTOM.
357: *
358: * If no expression for STACKBOTTOM can be found, and neither of the above
359: * heuristics are usable, the collector can still be used with all of the above
360: * undefined, provided one of the following is done:
361: * 1) GC_mark_roots can be changed to somehow mark from the correct stack(s)
362: * without reference to STACKBOTTOM. This is appropriate for use in
363: * conjunction with thread packages, since there will be multiple stacks.
364: * (Allocating thread stacks in the heap, and treating them as ordinary
365: * heap data objects is also possible as a last resort. However, this is
366: * likely to introduce significant amounts of excess storage retention
367: * unless the dead parts of the thread stacks are periodically cleared.)
368: * 2) Client code may set GC_stackbottom before calling any GC_ routines.
369: * If the author of the client code controls the main program, this is
370: * easily accomplished by introducing a new main program, setting
371: * GC_stackbottom to the address of a local variable, and then calling
372: * the original main program. The new main program would read something
373: * like:
374: *
375: * # include "gc_private.h"
376: *
377: * main(argc, argv, envp)
378: * int argc;
379: * char **argv, **envp;
380: * {
381: * int dummy;
382: *
383: * GC_stackbottom = (ptr_t)(&dummy);
384: * return(real_main(argc, argv, envp));
385: * }
386: *
387: *
388: * Each architecture may also define the style of virtual dirty bit
389: * implementation to be used:
390: * MPROTECT_VDB: Write protect the heap and catch faults.
391: * PROC_VDB: Use the SVR4 /proc primitives to read dirty bits.
392: *
393: * An architecture may define DYNAMIC_LOADING if dynamic_load.c
394: * defined GC_register_dynamic_libraries() for the architecture.
395: */
396:
397:
398: # define STACK_GRAN 0x1000000
399: # ifdef M68K
400: # define MACH_TYPE "M68K"
401: # define ALIGNMENT 2
402: # ifdef OPENBSD
403: # define OS_TYPE "OPENBSD"
404: # define HEURISTIC2
405: extern char etext;
406: # define DATASTART ((ptr_t)(&etext))
407: # endif
408: # ifdef NETBSD
409: # define OS_TYPE "NETBSD"
410: # define HEURISTIC2
411: extern char etext;
412: # define DATASTART ((ptr_t)(&etext))
413: # endif
414: # ifdef LINUX
415: # define OS_TYPE "LINUX"
416: # define STACKBOTTOM ((ptr_t)0xf0000000)
417: # define MPROTECT_VDB
418: # ifdef __ELF__
419: # define DYNAMIC_LOADING
420: extern char **__environ;
421: # define DATASTART ((ptr_t)(&__environ))
422: /* hideous kludge: __environ is the first */
423: /* word in crt0.o, and delimits the start */
424: /* of the data segment, no matter which */
425: /* ld options were passed through. */
426: /* We could use _etext instead, but that */
427: /* would include .rodata, which may */
428: /* contain large read-only data tables */
429: /* that we'd rather not scan. */
430: extern int _end;
431: # define DATAEND (&_end)
432: # else
433: extern int etext;
434: # define DATASTART ((ptr_t)((((word) (&etext)) + 0xfff) & ~0xfff))
435: # endif
436: # endif
437: # ifdef SUNOS4
438: # define OS_TYPE "SUNOS4"
439: extern char etext;
440: # define DATASTART ((ptr_t)((((word) (&etext)) + 0x1ffff) & ~0x1ffff))
441: # define HEURISTIC1 /* differs */
442: # define DYNAMIC_LOADING
443: # endif
444: # ifdef HP
445: # define OS_TYPE "HP"
446: extern char etext;
447: # define DATASTART ((ptr_t)((((word) (&etext)) + 0xfff) & ~0xfff))
448: # define STACKBOTTOM ((ptr_t) 0xffeffffc)
449: /* empirically determined. seems to work. */
450: # include <unistd.h>
451: # define GETPAGESIZE() sysconf(_SC_PAGE_SIZE)
452: # endif
453: # ifdef SYSV
454: # define OS_TYPE "SYSV"
455: extern etext;
456: # define DATASTART ((ptr_t)((((word) (&etext)) + 0x3fffff) \
457: & ~0x3fffff) \
458: +((word)&etext & 0x1fff))
459: /* This only works for shared-text binaries with magic number 0413.
460: The other sorts of SysV binaries put the data at the end of the text,
461: in which case the default of &etext would work. Unfortunately,
462: handling both would require having the magic-number available.
463: -- Parag
464: */
465: # define STACKBOTTOM ((ptr_t)0xFFFFFFFE)
466: /* The stack starts at the top of memory, but */
467: /* 0x0 cannot be used as setjump_test complains */
468: /* that the stack direction is incorrect. Two */
469: /* bytes down from 0x0 should be safe enough. */
470: /* --Parag */
471: # include <sys/mmu.h>
472: # define GETPAGESIZE() PAGESIZE /* Is this still right? */
473: # endif
474: # ifdef AMIGA
475: # define OS_TYPE "AMIGA"
476: /* STACKBOTTOM and DATASTART handled specially */
477: /* in os_dep.c */
478: # define DATAEND /* not needed */
479: # define GETPAGESIZE() 4096
480: # endif
481: # ifdef MACOS
482: # ifndef __LOWMEM__
483: # include <LowMem.h>
484: # endif
485: # define OS_TYPE "MACOS"
486: /* see os_dep.c for details of global data segments. */
487: # define STACKBOTTOM ((ptr_t) LMGetCurStackBase())
488: # define DATAEND /* not needed */
489: # define GETPAGESIZE() 4096
490: # endif
491: # ifdef NEXT
492: # define OS_TYPE "NEXT"
493: # define DATASTART ((ptr_t) get_etext())
494: # define STACKBOTTOM ((ptr_t) 0x4000000)
495: # define DATAEND /* not needed */
496: # endif
497: # endif
498:
499: # ifdef POWERPC
500: # define MACH_TYPE "POWERPC"
501: # ifdef MACOS
1.1.1.2 ! maekawa 502: # define ALIGNMENT 2 /* Still necessary? Could it be 4? */
1.1 maekawa 503: # ifndef __LOWMEM__
504: # include <LowMem.h>
505: # endif
506: # define OS_TYPE "MACOS"
507: /* see os_dep.c for details of global data segments. */
508: # define STACKBOTTOM ((ptr_t) LMGetCurStackBase())
509: # define DATAEND /* not needed */
510: # endif
511: # ifdef LINUX
1.1.1.2 ! maekawa 512: # define ALIGNMENT 4 /* Guess. Can someone verify? */
! 513: /* This was 2, but that didn't sound right. */
1.1 maekawa 514: # define OS_TYPE "LINUX"
515: # define HEURISTIC1
516: # undef STACK_GRAN
517: # define STACK_GRAN 0x10000000
1.1.1.2 ! maekawa 518: /* Stack usually starts at 0x80000000 */
1.1 maekawa 519: # define DATASTART GC_data_start
520: extern int _end;
521: # define DATAEND (&_end)
522: # endif
1.1.1.2 ! maekawa 523: # ifdef MACOSX
! 524: # define ALIGNMENT 4
! 525: # define OS_TYPE "MACOSX"
! 526: # define DATASTART ((ptr_t) get_etext())
! 527: # define STACKBOTTOM ((ptr_t) 0xc0000000)
! 528: # define DATAEND /* not needed */
! 529: # endif
1.1 maekawa 530: # endif
531:
532: # ifdef VAX
533: # define MACH_TYPE "VAX"
534: # define ALIGNMENT 4 /* Pointers are longword aligned by 4.2 C compiler */
535: extern char etext;
536: # define DATASTART ((ptr_t)(&etext))
537: # ifdef BSD
538: # define OS_TYPE "BSD"
539: # define HEURISTIC1
540: /* HEURISTIC2 may be OK, but it's hard to test. */
541: # endif
542: # ifdef ULTRIX
543: # define OS_TYPE "ULTRIX"
544: # define STACKBOTTOM ((ptr_t) 0x7fffc800)
545: # endif
546: # endif
547:
548: # ifdef RT
549: # define MACH_TYPE "RT"
550: # define ALIGNMENT 4
551: # define DATASTART ((ptr_t) 0x10000000)
552: # define STACKBOTTOM ((ptr_t) 0x1fffd800)
553: # endif
554:
555: # ifdef SPARC
556: # define MACH_TYPE "SPARC"
557: # define ALIGNMENT 4 /* Required by hardware */
558: # define ALIGN_DOUBLE
559: extern int etext;
560: # ifdef SUNOS5
561: # define OS_TYPE "SUNOS5"
562: extern int _etext;
563: extern int _end;
564: extern char * GC_SysVGetDataStart();
565: # define DATASTART (ptr_t)GC_SysVGetDataStart(0x10000, &_etext)
566: # define DATAEND (&_end)
567: # ifndef USE_MMAP
568: # define USE_MMAP
569: # endif
570: # ifdef USE_MMAP
571: # define HEAP_START (ptr_t)0x40000000
572: # else
573: # define HEAP_START DATAEND
574: # endif
575: # define PROC_VDB
576: /* HEURISTIC1 reportedly no longer works under 2.7. Thus we */
577: /* switched to HEURISTIC2, eventhough it creates some debugging */
578: /* issues. */
579: # define HEURISTIC2
580: # include <unistd.h>
581: # define GETPAGESIZE() sysconf(_SC_PAGESIZE)
582: /* getpagesize() appeared to be missing from at least one */
583: /* Solaris 5.4 installation. Weird. */
584: # define DYNAMIC_LOADING
585: # endif
586: # ifdef SUNOS4
587: # define OS_TYPE "SUNOS4"
588: /* [If you have a weak stomach, don't read this.] */
589: /* We would like to use: */
590: /* # define DATASTART ((ptr_t)((((word) (&etext)) + 0x1fff) & ~0x1fff)) */
591: /* This fails occasionally, due to an ancient, but very */
592: /* persistent ld bug. &etext is set 32 bytes too high. */
593: /* We instead read the text segment size from the a.out */
594: /* header, which happens to be mapped into our address space */
595: /* at the start of the text segment. The detective work here */
596: /* was done by Robert Ehrlich, Manuel Serrano, and Bernard */
597: /* Serpette of INRIA. */
598: /* This assumes ZMAGIC, i.e. demand-loadable executables. */
599: # define TEXTSTART 0x2000
600: # define DATASTART ((ptr_t)(*(int *)(TEXTSTART+0x4)+TEXTSTART))
601: # define MPROTECT_VDB
602: # define HEURISTIC1
603: # define DYNAMIC_LOADING
604: # endif
605: # ifdef DRSNX
606: # define CPP_WORDSZ 32
607: # define OS_TYPE "DRSNX"
608: extern char * GC_SysVGetDataStart();
609: extern int etext;
610: # define DATASTART (ptr_t)GC_SysVGetDataStart(0x10000, &etext)
611: # define MPROTECT_VDB
612: # define STACKBOTTOM ((ptr_t) 0xdfff0000)
613: # define DYNAMIC_LOADING
614: # endif
615: # ifdef LINUX
616: # define OS_TYPE "LINUX"
617: # ifdef __ELF__
618: # define DATASTART GC_data_start
619: # define DYNAMIC_LOADING
620: # else
621: Linux Sparc non elf ?
622: # endif
623: extern int _end;
624: # define DATAEND (&_end)
625: # define SVR4
626: # define STACKBOTTOM ((ptr_t) 0xf0000000)
627: # endif
1.1.1.2 ! maekawa 628: # ifdef OPENBSD
! 629: # define OS_TYPE "OPENBSD"
! 630: # define STACKBOTTOM ((ptr_t) 0xf8000000)
! 631: # define DATASTART ((ptr_t)(&etext))
! 632: # endif
1.1 maekawa 633: # endif
634:
635: # ifdef I386
636: # define MACH_TYPE "I386"
637: # define ALIGNMENT 4 /* Appears to hold for all "32 bit" compilers */
638: /* except Borland. The -a4 option fixes */
639: /* Borland. */
640: /* Ivan Demakov: For Watcom the option is -zp4. */
641: # ifndef SMALL_CONFIG
642: # define ALIGN_DOUBLE /* Not strictly necessary, but may give speed */
643: /* improvement on Pentiums. */
644: # endif
645: # ifdef SEQUENT
646: # define OS_TYPE "SEQUENT"
647: extern int etext;
648: # define DATASTART ((ptr_t)((((word) (&etext)) + 0xfff) & ~0xfff))
649: # define STACKBOTTOM ((ptr_t) 0x3ffff000)
650: # endif
651: # ifdef SUNOS5
652: # define OS_TYPE "SUNOS5"
653: extern int etext, _start;
654: extern char * GC_SysVGetDataStart();
655: # define DATASTART GC_SysVGetDataStart(0x1000, &etext)
656: # define STACKBOTTOM ((ptr_t)(&_start))
657: /** At least in Solaris 2.5, PROC_VDB gives wrong values for dirty bits. */
658: /*# define PROC_VDB*/
659: # define DYNAMIC_LOADING
660: # ifndef USE_MMAP
661: # define USE_MMAP
662: # endif
663: # ifdef USE_MMAP
664: # define HEAP_START (ptr_t)0x40000000
665: # else
666: # define HEAP_START DATAEND
667: # endif
668: # endif
669: # ifdef SCO
670: # define OS_TYPE "SCO"
671: extern int etext;
672: # define DATASTART ((ptr_t)((((word) (&etext)) + 0x3fffff) \
673: & ~0x3fffff) \
674: +((word)&etext & 0xfff))
675: # define STACKBOTTOM ((ptr_t) 0x7ffffffc)
676: # endif
677: # ifdef SCO_ELF
678: # define OS_TYPE "SCO_ELF"
679: extern int etext;
680: # define DATASTART ((ptr_t)(&etext))
681: # define STACKBOTTOM ((ptr_t) 0x08048000)
682: # define DYNAMIC_LOADING
683: # define ELF_CLASS ELFCLASS32
684: # endif
685: # ifdef LINUX
686: # define OS_TYPE "LINUX"
1.1.1.2 ! maekawa 687: # define HEURISTIC1
! 688: # undef STACK_GRAN
! 689: # define STACK_GRAN 0x10000000
! 690: /* STACKBOTTOM is usually 0xc0000000, but this changes with */
! 691: /* different kernel configurations. In particular, systems */
! 692: /* with 2GB physical memory will usually move the user */
! 693: /* address space limit, and hence initial SP to 0x80000000. */
1.1 maekawa 694: # if !defined(LINUX_THREADS) || !defined(REDIRECT_MALLOC)
695: # define MPROTECT_VDB
696: # else
697: /* We seem to get random errors in incremental mode, */
698: /* possibly because Linux threads is itself a malloc client */
699: /* and can't deal with the signals. */
700: # endif
701: # ifdef __ELF__
702: # define DYNAMIC_LOADING
703: # ifdef UNDEFINED /* includes ro data */
704: extern int _etext;
705: # define DATASTART ((ptr_t)((((word) (&_etext)) + 0xfff) & ~0xfff))
706: # endif
707: # include <features.h>
708: # if defined(__GLIBC__) && __GLIBC__ >= 2
709: extern int __data_start;
710: # define DATASTART ((ptr_t)(&__data_start))
711: # else
712: extern char **__environ;
713: # define DATASTART ((ptr_t)(&__environ))
714: /* hideous kludge: __environ is the first */
715: /* word in crt0.o, and delimits the start */
716: /* of the data segment, no matter which */
717: /* ld options were passed through. */
718: /* We could use _etext instead, but that */
719: /* would include .rodata, which may */
720: /* contain large read-only data tables */
721: /* that we'd rather not scan. */
722: # endif
723: extern int _end;
724: # define DATAEND (&_end)
725: # else
726: extern int etext;
727: # define DATASTART ((ptr_t)((((word) (&etext)) + 0xfff) & ~0xfff))
728: # endif
729: # endif
730: # ifdef CYGWIN32
731: # define OS_TYPE "CYGWIN32"
732: extern int _data_start__;
733: extern int _data_end__;
734: extern int _bss_start__;
735: extern int _bss_end__;
736: /* For binutils 2.9.1, we have */
737: /* DATASTART = _data_start__ */
738: /* DATAEND = _bss_end__ */
739: /* whereas for some earlier versions it was */
740: /* DATASTART = _bss_start__ */
741: /* DATAEND = _data_end__ */
742: /* To get it right for both, we take the */
743: /* minumum/maximum of the two. */
744: # define MAX(x,y) ((x) > (y) ? (x) : (y))
745: # define MIN(x,y) ((x) < (y) ? (x) : (y))
746: # define DATASTART ((ptr_t) MIN(&_data_start__, &_bss_start__))
747: # define DATAEND ((ptr_t) MAX(&_data_end__, &_bss_end__))
748: # undef STACK_GRAN
749: # define STACK_GRAN 0x10000
750: # define HEURISTIC1
751: # endif
752: # ifdef OS2
753: # define OS_TYPE "OS2"
754: /* STACKBOTTOM and DATASTART are handled specially in */
755: /* os_dep.c. OS2 actually has the right */
756: /* system call! */
757: # define DATAEND /* not needed */
758: # endif
759: # ifdef MSWIN32
760: # define OS_TYPE "MSWIN32"
761: /* STACKBOTTOM and DATASTART are handled specially in */
762: /* os_dep.c. */
763: # ifndef __WATCOMC__
764: # define MPROTECT_VDB
765: # endif
766: # define DATAEND /* not needed */
767: # endif
768: # ifdef DJGPP
769: # define OS_TYPE "DJGPP"
770: # include "stubinfo.h"
771: extern int etext;
772: extern int _stklen;
773: extern int __djgpp_stack_limit;
774: # define DATASTART ((ptr_t)((((word) (&etext)) + 0x1ff) & ~0x1ff))
775: /* # define STACKBOTTOM ((ptr_t)((word) _stubinfo + _stubinfo->size \
776: + _stklen)) */
777: # define STACKBOTTOM ((ptr_t)((word) __djgpp_stack_limit + _stklen))
778: /* This may not be right. */
779: # endif
780: # ifdef OPENBSD
781: # define OS_TYPE "OPENBSD"
782: # endif
783: # ifdef FREEBSD
784: # define OS_TYPE "FREEBSD"
785: # define MPROTECT_VDB
786: # endif
787: # ifdef NETBSD
788: # define OS_TYPE "NETBSD"
789: # endif
790: # ifdef THREE86BSD
791: # define OS_TYPE "THREE86BSD"
792: # endif
793: # ifdef BSDI
794: # define OS_TYPE "BSDI"
795: # endif
796: # if defined(OPENBSD) || defined(FREEBSD) || defined(NETBSD) \
797: || defined(THREE86BSD) || defined(BSDI)
798: # define HEURISTIC2
799: extern char etext;
800: # define DATASTART ((ptr_t)(&etext))
801: # endif
802: # ifdef NEXT
803: # define OS_TYPE "NEXT"
804: # define DATASTART ((ptr_t) get_etext())
805: # define STACKBOTTOM ((ptr_t)0xc0000000)
806: # define DATAEND /* not needed */
807: # endif
808: # ifdef DOS4GW
809: # define OS_TYPE "DOS4GW"
810: extern long __nullarea;
811: extern char _end;
812: extern char *_STACKTOP;
813: /* Depending on calling conventions Watcom C either precedes
814: or does not precedes with undescore names of C-variables.
815: Make sure startup code variables always have the same names. */
816: #pragma aux __nullarea "*";
817: #pragma aux _end "*";
818: # define STACKBOTTOM ((ptr_t) _STACKTOP)
819: /* confused? me too. */
820: # define DATASTART ((ptr_t) &__nullarea)
821: # define DATAEND ((ptr_t) &_end)
822: # endif
823: # endif
824:
825: # ifdef NS32K
826: # define MACH_TYPE "NS32K"
827: # define ALIGNMENT 4
828: extern char **environ;
829: # define DATASTART ((ptr_t)(&environ))
830: /* hideous kludge: environ is the first */
831: /* word in crt0.o, and delimits the start */
832: /* of the data segment, no matter which */
833: /* ld options were passed through. */
834: # define STACKBOTTOM ((ptr_t) 0xfffff000) /* for Encore */
835: # endif
836:
837: # ifdef MIPS
838: # define MACH_TYPE "MIPS"
839: # ifndef IRIX5
840: # define DATASTART (ptr_t)0x10000000
841: /* Could probably be slightly higher since */
842: /* startup code allocates lots of stuff. */
843: # else
844: extern int _fdata;
845: # define DATASTART ((ptr_t)(&_fdata))
846: # ifdef USE_MMAP
847: # define HEAP_START (ptr_t)0x30000000
848: # else
849: # define HEAP_START DATASTART
850: # endif
851: /* Lowest plausible heap address. */
852: /* In the MMAP case, we map there. */
853: /* In either case it is used to identify */
854: /* heap sections so they're not */
855: /* considered as roots. */
856: # endif /* IRIX5 */
857: # define HEURISTIC2
858: /* # define STACKBOTTOM ((ptr_t)0x7fff8000) sometimes also works. */
859: # ifdef ULTRIX
860: # define OS_TYPE "ULTRIX"
861: # define ALIGNMENT 4
862: # endif
863: # ifdef RISCOS
864: # define OS_TYPE "RISCOS"
865: # define ALIGNMENT 4 /* Required by hardware */
866: # endif
867: # ifdef IRIX5
868: # define OS_TYPE "IRIX5"
869: # define MPROTECT_VDB
870: # ifdef _MIPS_SZPTR
871: # define CPP_WORDSZ _MIPS_SZPTR
872: # define ALIGNMENT (_MIPS_SZPTR/8)
873: # if CPP_WORDSZ != 64
874: # define ALIGN_DOUBLE
875: # endif
876: # else
877: # define ALIGNMENT 4
878: # define ALIGN_DOUBLE
879: # endif
880: # define DYNAMIC_LOADING
881: # endif
882: # endif
883:
884: # ifdef RS6000
885: # define MACH_TYPE "RS6000"
886: # define ALIGNMENT 4
887: # define DATASTART ((ptr_t)0x20000000)
888: extern int errno;
889: # define STACKBOTTOM ((ptr_t)((ulong)&errno))
890: # define DYNAMIC_LOADING
891: /* For really old versions of AIX, this may have to be removed. */
892: # endif
893:
894: # ifdef HP_PA
895: # define MACH_TYPE "HP_PA"
896: # define ALIGNMENT 4
897: # define ALIGN_DOUBLE
898: extern int __data_start;
899: # define DATASTART ((ptr_t)(&__data_start))
900: # if 0
901: /* The following appears to work for 7xx systems running HP/UX */
902: /* 9.xx Furthermore, it might result in much faster */
903: /* collections than HEURISTIC2, which may involve scanning */
904: /* segments that directly precede the stack. It is not the */
905: /* default, since it may not work on older machine/OS */
906: /* combinations. (Thanks to Raymond X.T. Nijssen for uncovering */
907: /* this.) */
908: # define STACKBOTTOM ((ptr_t) 0x7b033000) /* from /etc/conf/h/param.h */
909: # else
910: # define HEURISTIC2
911: # endif
912: # define STACK_GROWS_UP
913: # define DYNAMIC_LOADING
914: # include <unistd.h>
915: # define GETPAGESIZE() sysconf(_SC_PAGE_SIZE)
916: /* They misspelled the Posix macro? */
917: # endif
918:
919: # ifdef ALPHA
920: # define MACH_TYPE "ALPHA"
921: # define ALIGNMENT 8
922: # ifdef OSF1
923: # define OS_TYPE "OSF1"
924: # define DATASTART ((ptr_t) 0x140000000)
925: extern _end;
926: # define DATAEND ((ptr_t) &_end)
927: # define HEURISTIC2
928: /* Normally HEURISTIC2 is too conervative, since */
929: /* the text segment immediately follows the stack. */
930: /* Hence we give an upper pound. */
931: extern int __start;
932: # define HEURISTIC2_LIMIT ((ptr_t)((word)(&__start) & ~(getpagesize()-1)))
933: # define CPP_WORDSZ 64
934: # define MPROTECT_VDB
935: # define DYNAMIC_LOADING
936: # endif
937: # ifdef LINUX
938: # define OS_TYPE "LINUX"
939: # define CPP_WORDSZ 64
940: # define STACKBOTTOM ((ptr_t) 0x120000000)
941: # ifdef __ELF__
1.1.1.2 ! maekawa 942: # if 0
! 943: /* __data_start apparently disappeared in some recent releases. */
1.1 maekawa 944: extern int __data_start;
945: # define DATASTART &__data_start
1.1.1.2 ! maekawa 946: # endif
! 947: # define DATASTART GC_data_start
! 948: # define DYNAMIC_LOADING
1.1 maekawa 949: # else
950: # define DATASTART ((ptr_t) 0x140000000)
951: # endif
952: extern int _end;
953: # define DATAEND (&_end)
954: # define MPROTECT_VDB
955: /* Has only been superficially tested. May not */
956: /* work on all versions. */
957: # endif
958: # endif
959:
960: # ifdef M88K
961: # define MACH_TYPE "M88K"
962: # define ALIGNMENT 4
963: # define ALIGN_DOUBLE
964: extern int etext;
965: # ifdef CX_UX
966: # define OS_TYPE "CX_UX"
967: # define DATASTART ((((word)&etext + 0x3fffff) & ~0x3fffff) + 0x10000)
968: # endif
969: # ifdef DGUX
970: # define OS_TYPE "DGUX"
971: extern char * GC_SysVGetDataStart();
972: # define DATASTART (ptr_t)GC_SysVGetDataStart(0x10000, &etext)
973: # endif
974: # define STACKBOTTOM ((char*)0xf0000000) /* determined empirically */
975: # endif
976:
977: # ifdef S370
978: # define MACH_TYPE "S370"
979: # define OS_TYPE "UTS4"
980: # define ALIGNMENT 4 /* Required by hardware */
981: extern int etext;
982: extern int _etext;
983: extern int _end;
984: extern char * GC_SysVGetDataStart();
985: # define DATASTART (ptr_t)GC_SysVGetDataStart(0x10000, &_etext)
986: # define DATAEND (&_end)
987: # define HEURISTIC2
988: # endif
989:
990: # ifndef STACK_GROWS_UP
991: # define STACK_GROWS_DOWN
992: # endif
993:
994: # ifndef CPP_WORDSZ
995: # define CPP_WORDSZ 32
996: # endif
997:
998: # ifndef OS_TYPE
999: # define OS_TYPE ""
1000: # endif
1001:
1002: # ifndef DATAEND
1003: extern int end;
1004: # define DATAEND (&end)
1005: # endif
1006:
1007: # if defined(SVR4) && !defined(GETPAGESIZE)
1008: # include <unistd.h>
1009: # define GETPAGESIZE() sysconf(_SC_PAGESIZE)
1010: # endif
1011:
1012: # ifndef GETPAGESIZE
1013: # if defined(SUNOS5) || defined(IRIX5)
1014: # include <unistd.h>
1015: # endif
1016: # define GETPAGESIZE() getpagesize()
1017: # endif
1018:
1019: # if defined(SUNOS5) || defined(DRSNX) || defined(UTS4)
1020: /* OS has SVR4 generic features. Probably others also qualify. */
1021: # define SVR4
1022: # endif
1023:
1024: # if defined(SUNOS5) || defined(DRSNX)
1025: /* OS has SUNOS5 style semi-undocumented interface to dynamic */
1026: /* loader. */
1027: # define SUNOS5DL
1028: /* OS has SUNOS5 style signal handlers. */
1029: # define SUNOS5SIGS
1030: # endif
1031:
1032: # if CPP_WORDSZ != 32 && CPP_WORDSZ != 64
1033: -> bad word size
1034: # endif
1035:
1036: # ifdef PCR
1037: # undef DYNAMIC_LOADING
1038: # undef STACKBOTTOM
1039: # undef HEURISTIC1
1040: # undef HEURISTIC2
1041: # undef PROC_VDB
1042: # undef MPROTECT_VDB
1043: # define PCR_VDB
1044: # endif
1045:
1046: # ifdef SRC_M3
1047: /* Postponed for now. */
1048: # undef PROC_VDB
1049: # undef MPROTECT_VDB
1050: # endif
1051:
1052: # ifdef SMALL_CONFIG
1053: /* Presumably not worth the space it takes. */
1054: # undef PROC_VDB
1055: # undef MPROTECT_VDB
1.1.1.2 ! maekawa 1056: # endif
! 1057:
! 1058: # ifdef USE_MUNMAP
! 1059: # undef MPROTECT_VDB /* Can't deal with address space holes. */
1.1 maekawa 1060: # endif
1061:
1062: # if !defined(PCR_VDB) && !defined(PROC_VDB) && !defined(MPROTECT_VDB)
1063: # define DEFAULT_VDB
1064: # endif
1065:
1066: # if defined(_SOLARIS_PTHREADS) && !defined(SOLARIS_THREADS)
1067: # define SOLARIS_THREADS
1068: # endif
1069: # if defined(IRIX_THREADS) && !defined(IRIX5)
1070: --> inconsistent configuration
1071: # endif
1072: # if defined(IRIX_JDK_THREADS) && !defined(IRIX5)
1073: --> inconsistent configuration
1074: # endif
1075: # if defined(LINUX_THREADS) && !defined(LINUX)
1076: --> inconsistent configuration
1077: # endif
1078: # if defined(SOLARIS_THREADS) && !defined(SUNOS5)
1079: --> inconsistent configuration
1080: # endif
1081: # if defined(PCR) || defined(SRC_M3) || \
1082: defined(SOLARIS_THREADS) || defined(WIN32_THREADS) || \
1083: defined(IRIX_THREADS) || defined(LINUX_THREADS) || \
1084: defined(IRIX_JDK_THREADS)
1085: # define THREADS
1086: # endif
1087:
1088: # if defined(HP_PA) || defined(M88K) || defined(POWERPC) \
1089: || (defined(I386) && defined(OS2)) || defined(UTS4) || defined(LINT)
1090: /* Use setjmp based hack to mark from callee-save registers. */
1091: # define USE_GENERIC_PUSH_REGS
1092: # endif
1093: # if defined(SPARC) && !defined(LINUX)
1094: # define SAVE_CALL_CHAIN
1095: # define ASM_CLEAR_CODE /* Stack clearing is crucial, and we */
1096: /* include assembly code to do it well. */
1097: # endif
1098:
1099: # endif
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>