=================================================================== RCS file: /home/cvs/OpenXM_contrib/gmp/doc/Attic/configuration,v retrieving revision 1.1.1.1 retrieving revision 1.1.1.2 diff -u -p -r1.1.1.1 -r1.1.1.2 --- OpenXM_contrib/gmp/doc/Attic/configuration 2000/09/09 14:12:20 1.1.1.1 +++ OpenXM_contrib/gmp/doc/Attic/configuration 2003/08/25 16:06:11 1.1.1.2 @@ -1,48 +1,89 @@ /* doc/configuration (in Emacs -*-outline-*- format). */ -* How to add a new file +Copyright 2000, 2001, 2002 Free Software Foundation, Inc. -** A file in the `mpn' subdirectory +This file is part of the GNU MP Library. -The way we build libmpn (in the `mpn' subdirectory) is quite special. +The GNU MP Library is free software; you can redistribute it and/or modify +it under the terms of the GNU Lesser General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or (at your +option) any later version. -There is (currently) only one ``generic'' file, one that is truly -target independent. That is `mp_bases.c'. All other files are kept -in subdirectories of `mpn' with the subdirectory names indicating the -target processor. For example, in the `alpha' subdirectory, code -specific to the Alpha processor is found. +The GNU MP Library is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY +or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public +License for more details. -When running `configure', a bunch of symbolic links are made in the -`mpn' subdirectory. If the the build host doesn't support symlinks -then either hard links or copying is used. +You should have received a copy of the GNU Lesser General Public License +along with the GNU MP Library; see the file COPYING.LIB. If not, write to +the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +02111-1307, USA. + + +* Adding a new file + +** Adding a top-level file + + i) Add it to libgmp_la_SOURCES in Makefile.am. + + ii) If libmp.la needs it (usually doesn't), then add it to + libmp_la_SOURCES too. + +** Adding a subdirectory file + +For instance for mpz, + + i) Add file.c to libmpz_la_SOURCES in mpz/Makefile.am. + + ii) Add mpz/file$U.lo to MPZ_OBJECTS in the top-level Makefile.am + + iii) If for some reason libmp.la needs it (usually doesn't) then add + mpz/file$U.lo to libmp_la_DEPENDENCIES in the top-level + Makefile.am too. + +The same applies to mpf, mpq, scanf and printf. + +** Adding an mpn file + +The way we build libmpn (in the `mpn' subdirectory) is quite special. + +Currently only mpn/mp_bases.c is truely generic and included in every +configuration. All other files are linked at build time into the mpn +build directory from one of the CPU specific sub-directories, or from +the mpn/generic directory. + There are four types of mpn source files. .asm Assembly code preprocessed with m4 - .S Assembly code preprocessed with CPP + .S Assembly code preprocessed with cpp .s Assembly code not preprocessed at all .c C code There are two types of .asm files. - i) ``Normal'' files containing one function, possibly with more than - one entry point. + i) ``Normal'' files containing one function, though possibly with + more than one entry point. ii) Multi-function files that generate one of a set of functions according to build options. +To add a new implementation of an existing function, -When adding a new implementation of an existing function, + i) Put it in the appropriate CPU-specific mpn subdirectory, it'll be + detected and used. - i) Put it in the appropriate mpn subdirectory. It'll be detected and - used. + ii) Any entrypoints tested by HAVE_NATIVE_func in other code must + have PROLOGUE(func) for configure to grep. This is normal for + .asm or .S files, but for .c files a dummy comment like the + following will be needed. - ii) If it's a .asm or .S, be sure to have a PROLOGUE(func) entry - point since configure greps for that to set up the - HAVE_NATIVE_func defines in config.h. + /* + PROLOGUE(func) + */ -When adding a new implementation using a multi-function file, in -addition do the following, +To add a new implementation using a multi-function file, in addition +do the following, i) Use a MULFUNC_PROLOGUE(func1 func2 ...) in the .asm, declaring all the functions implemented, including carry-in variants. @@ -51,137 +92,304 @@ addition do the following, then MULFUNC_PROLOGUE isn't necessary (but this is usually not the case). -When adding a new style of multi-function file, in addition do the +To add a new style of multi-function file, in addition do the following, i) Add to the "case" statement in configure.in which lists each multi-function filename and what function files it can provide. -When adding a completely new mpn function file, do the following, +To add a completely new mpn function file, do the following, - i) Add it to configure.in under one of the following + i) Ensure the filename is a valid C identifier, due to the + -DOPERATION_$* used to support multi-function files. This means + "-" can't be used (but "_" can). - a) `gmp_mpn_functions' if it exists for every target. This means - there must be a C version in mpn/generic. (Eg. add_n) + ii) Add it to configure.in under one of the following - b) `gmp_mpn_functions_optional' if it's a standard function, but - doesn't need to exist for every target. Code wanting to use - this will test HAVE_NATIVE_func to see if it's available. - (Eg. copyi) + a) `gmp_mpn_functions' if it exists for every target. This + means there must be a C version in mpn/generic. (Eg. mul_1) - c) `extra_functions' for some targets, if it's a special function - that only ever needs to exist for certain targets. Code - wanting to use it will generally look for the target, but - HAVE_NATIVE_func can be used if desired. + b) `gmp_mpn_functions_optional' if it's a standard function, but + doesn't need to exist for every target. Code wanting to use + this will test HAVE_NATIVE_func to see if it's available. + (Eg. copyi) - ii) If you want `HAVE_NATIVE_func' defined in config.h, add - `#undef HAVE_NATIVE_func' to acconfig.h. + c) `extra_functions' for some targets, if it's a special + function that only ever needs to exist for certain targets. + Code wanting to use it can test either HAVE_NATIVE_func or + HAVE_HOST_CPU_foo, as desired. - iii) If the function can be provided by a multi-function file, - then follow the directions above for them too. + iii) Add `#undef HAVE_NATIVE_func' to acconfig.h. This is only + actually necessary if that define is going to be used, but for + consistency it's good to do it always. -** Add a file in any other directory + iv) Add file.c to nodist_libdummy_la_SOURCES in mpn/Makefile.am (in + order to get an ansi2knr rule). If the file is only in + assembler then this step is unnecessary, but do it anyway so as + not to forget if later a .c version is added. -When adding a top-level file, + v) If the function can be provided by a multi-function file, then + add to the "case" statement in configure.in which lists each + multi-function filename and what function files it can provide. - i) Add it to libgmp_la_SOURCES in Makefile.am. - ii) If libmp.la needs it, then add it to libmp_la_SOURCES too. +** Adding a test program -When adding an mpz file, + i) Tests to be run early in the testing can be added to the main + "tests" sub-directory. - i) Add file.c to libmpz_la_SOURCES in mpz/Makefile.am. + ii) Tests for mpn, mpz, mpq and mpf can be added under the + corresponding tests subdirectory. - ii) Add mpz/file.lo to MPZ_OBJECTS in the top-level Makefile.am. + iii) Generic tests for late in the testing can be added to + "tests/misc". printf and scanf tests currently live there too. -If a multi-function mpz file is being added, + iv) Random number function tests can be added to "tests/rand". That + directory has some development-time programs too. - i) In mpz/Makefile.am, + v) C++ test programs can be added to "tests/cxx". A line like the + following must be added for each, since by default automake looks + for a .c file. - a) Add the file to EXTRA_DIST. + t_foo_SOURCES = t-foo.cc - b) Add rules copying the file at build time to duplicates with - appropriate names. +In all cases the name of the program should be added to check_PROGRAMS +in the Makefile.am. TESTS is equal to check_PROGRAMS, so all those +programs get run. - c) Add each such func.c to nodist_libmpz_la_SOURCES. +"tests/devel" has a number of programs which are only for development +purposes and are not for use in "make check". These should be listed +in EXTRA_PROGRAMS to get Makefile rules created, but they're never +built or run unless an explicit "make someprog" is used. - ii) Add each c) above also as mpz/func.lo in MPZ_OBJECTS in the - top-level Makefile.am. +** Macos directory - iii) In the multi-function file, expect a preprocessor symbol - OPERATION_func to indicate what form is being compiled. +The macos/configure script will automatically pick up additions to +gmp_mpn_functions, MPZ_OBJECTS, etc, but currently test programs need +to be added to Makefile.in manually. -The same applies to mpf and mpq (except that multi-function support -doesn't exist in mpq/Makefile.am at the moment). +When modifying the top-level configure.in ensure that it doesn't upset +the macos/configure script heuristics. -See mpz/mul_siui.c or mpf/integer.c for example multi-function files. -* Selecting compiler and its flags by hand +* Adding a new CPU -Specifying CC on the configure command line, will result in a default -set of compiler flags, CFLAGS; `-g' for all compilers plus `-O2' for -gcc. Specify CFLAGS to set better flags. +In general it's policy to use proper names for each CPU type +supported. If two CPUs are quite similar and perhaps don't have any +actual differences in GMP then they're still given separate names, for +example alphaev67 and alphaev68. -Example +Canonical names: - $ configure CC=my-gcc + i) Decide the canonical CPU names GMP will accept. -will give + ii) Add these to the config.sub wrapper if configfsf.sub doesn't + already accept them. - CFLAGS = -g -O2 + iii) Document the names in gmp.texi. -Specifying CC on the configure command line will make configure -believe it's a 32-bit compiler and not choose a source path with -64-bit assembly code. Specify CC64 as well as CC to make configure -pick 64-bit assembly code. +Aliases (optional): - $ configure CC=my64bit-cc CC64=my64bit-cc CFLAGS="-my -flags" + i) Any aliases can be added to the config.sub wrapper, unless + configfsf.sub already does the right thing with them. + ii) Leave configure.in and everywhere else using only the canonical + names. Aliases shouldn't appear anywhere except config.sub. + + iii) Document in gmp.texi, if desired. Usually this isn't a good + idea, better encourage users to know just the canonical + names. + +Configure: + + i) Add patterns to configure.in for the new CPU names. Include the + following (see configure.in for the variables to set up), + + a) ABI choices (if any). + b) Compiler choices. + c) mpn path for CPU specific code. + d) Good default CFLAGS for each likely compiler. + d) Any special tests necessary on the compiler or assembler + capabilities. + + ii) M4 macros to be shared by asm files in a CPU family are by + convention in a foo-defs.m4 like mpn/x86/x86-defs.m4. They're + likely to use settings from config.m4 generated by configure. + + * The configure system -** What we use -We use the tools in . +** Installing tools -** How to install new versions of Autoconf / Automake / Libtool +The current versions of automake, autoconf and libtool in use can be +checked in the ChangeLog. Look for "Update to ...". Patches may have +been applied, look for "Regenerate ...". -*** Build Libtool -With a fresh CVS checkout, run the bootstrap script with released -versions (not CVS versions) of Autoconf and Automake in PATH. +The GMP build system is in places somewhat dependent on the internals +of the build tools. Obviously that's avoided as much as possible, but +where it can't it creates a problem when upgrading or attempting to +use different tools versions. -*** Update gmp directory -gmp$ rm ltconfig ltmain.sh -gmp$ libtoolize --copy -gmp$ automake --add-missing --copy +** Updating gmp +The following files need to be updated when going to a new version of +the build tools. Unfortunately the tools generally don't identify +when an out-of-date version is present. + +aclocal.m4 is updated by running "aclocal -I mpfr". + +INSTALL.autoconf can be copied from INSTALL in autoconf. + +ltmain.sh comes from libtool. Remove it and run "libtoolize --copy", +or just copy the file by hand. + +ansi2knr.c, ansi2knr.1, install.sh, mdate-sh and mkinstalldirs come +from automake and can be updated by copying or by removing and running +"automake --add-missing --copy". + +texinfo.tex can be updated from ftp.gnu.org. Check it still works +with "make gmp.dvi" and "texi2pdf gmp.texi". + +configfsf.guess and configfsf.sub can be updated from ftp.gnu.org (or +from the "config" cvs module at subversions.gnu.org). The gmp +config.guess and config.sub wrappers are supposed to make such an +update fairly painless. + +depcomp from automake is not needed because all Makefile.am files +specify "no-dependencies". + ** How it works + During development: Input files Tool Output files ------------------------------------------ aclocal acinclude.m4 --------------> aclocal.m4 - + autoconf configure.in \ -------------> configure aclocal.m4 / - + automake Makefile.am \ -------------> Makefile.in - configure.in / - + configure.in / + autoheader configure.in \ -------------> config.in + aclocal.m4 | acconfig.h / +When configured with --enable-maintainer-mode the necessary tools are +re-run on changing the input files. This can end up running a lot +more things than are really necessary, but that's too bad. At build time: Input files Tool Output files ------------------------------------------ - - configure - Makefile.in \ -------------> / Makefile - config.in / | config.h - \ config.m4 + Makefile.in \ configure / Makefile + config.in | -------------> | config.h + gmp-h.in | | config.m4 + mp-h.in / | gmp.h + \ mp.h + +** C++ configuration + +It's intended that the contents of libgmp.la won't vary according to +whether --enable-cxx is selected. This means that if C++ shared +libraries don't work properly then a shared+static with --disable-cxx +can be done for the C parts, then a static-only with --enable-cxx to +get libgmpxx. + +libgmpxx.la uses some internals from libgmp.la, in order to share code +between C and C++. It's intended that libgmpxx can only be expected +to work with libgmp from the same version of GMP. If some of the +shared internals change their interface, then it's proposed to rename +them, for instance __gmp_doprint2 or the like, so as to provoke link +errors rather than mysterious failures from a mismatch. + +* Development setups + +** General + +--disable-shared will make builds go much faster, though of course +shared or shared+static should be tested too. + +--enable-mpbsd grabs various bits of mpz, which might need to be +adjusted if things in those routines are changed. Building mpbsd all +the time doesn't cost much. + +--prefix to a dummy directory followed by "make install" will show +what's installed. + +"make check" acts on the libgmp just built, and will ignore any other +/usr/lib/libgmp, or at least it should do. Libtool does various hairy +things to ensure it hits the just-built library. + +** Debugging + +A build with maximum debugging can be made with + + ./configure --host=none --enable-assert --enable-alloca=debug + +Malloc memory leaks are always checked by the test programs. With +alloca=debug any TMP_ALLOC leaks will be detected too. +--enable-alloca=malloc-reentrant also has this effect. + +** Long long limb testing + +On systems where gcc supports long long, but a limb is normally just a +long, the following can be used to force long long for testing +purposes. It will probably run quite slowly. + + ./configure --host=none ABI=longlong + +** Function argument conversions + +When using gcc, configuring with something like + + ./configure CFLAGS="-g -Wall -Wconversion -Wno-sign-compare" + +can show where function parameters are being converted due to having +function prototypes available, which won't happen in a K&R compiler. +Doing this in combination with the long long limb setups above is +good. + +Conversions between int and long aren't warned about by gcc when +they're the same size, which is unfortunate because casts should be +used in such cases, for the benefit of K&R compilers with int!=long +and where the difference matters in function calls. + +** K&R support + +Function definitions must be in the GNU stylized form to work. See +the ansi2knr.1 man page. + +__GMP_PROTO is used for function prototypes, other ANSI / K&R +differences are conditionalized in various places. + +Proper testing of the K&R support requires a compiler which gives an +error for ANSI-isms. Configuring with --host=none is a good idea, to +test all the generic C code. + +When using an ANSI compiler, the ansi2knr setups can be partially +tested with + + ./configure am_cv_prog_cc_stdc=no + +This will test the use of $U and the like in the makefiles, but not +much else. + +am_cv_prog_cc_stdc=no can be used with a compiler like HP C which is +K&R by default but to which configure normally adds ANSI mode flags. +This then should be a good full K&R test. + + + +Local variables: +mode: outline +fill-column: 70 +End: /* eof doc/configuration */