[BACK]Return to Makefile.in CVS log [TXT][DIR] Up to [local] / OpenXM_contrib / gmp / mpfr

Annotation of OpenXM_contrib/gmp/mpfr/Makefile.in, Revision 1.1

1.1     ! maekawa     1: # Makefile.in generated automatically by automake 1.4a from Makefile.am
        !             2:
        !             3: # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
        !             4: # This Makefile.in is free software; the Free Software Foundation
        !             5: # gives unlimited permission to copy and/or distribute it,
        !             6: # with or without modifications, as long as this notice is preserved.
        !             7:
        !             8: # This program is distributed in the hope that it will be useful,
        !             9: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
        !            10: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
        !            11: # PARTICULAR PURPOSE.
        !            12:
        !            13: SHELL = @SHELL@
        !            14:
        !            15: srcdir = @srcdir@
        !            16: top_srcdir = @top_srcdir@
        !            17: VPATH = @srcdir@
        !            18: prefix = @prefix@
        !            19: exec_prefix = @exec_prefix@
        !            20:
        !            21: bindir = @bindir@
        !            22: sbindir = @sbindir@
        !            23: libexecdir = @libexecdir@
        !            24: datadir = @datadir@
        !            25: sysconfdir = @sysconfdir@
        !            26: sharedstatedir = @sharedstatedir@
        !            27: localstatedir = @localstatedir@
        !            28: libdir = @libdir@
        !            29: infodir = @infodir@
        !            30: mandir = @mandir@
        !            31: includedir = @includedir@
        !            32: oldincludedir = /usr/include
        !            33:
        !            34: DESTDIR =
        !            35:
        !            36: pkgdatadir = $(datadir)/@PACKAGE@
        !            37: pkglibdir = $(libdir)/@PACKAGE@
        !            38: pkgincludedir = $(includedir)/@PACKAGE@
        !            39:
        !            40: top_builddir = ..
        !            41:
        !            42: ACLOCAL = @ACLOCAL@
        !            43: AUTOCONF = @AUTOCONF@
        !            44: AUTOMAKE = @AUTOMAKE@
        !            45: AUTOHEADER = @AUTOHEADER@
        !            46:
        !            47: INSTALL = @INSTALL@
        !            48: INSTALL_PROGRAM = @INSTALL_PROGRAM@
        !            49: INSTALL_DATA = @INSTALL_DATA@
        !            50: INSTALL_SCRIPT = @INSTALL_SCRIPT@
        !            51: INSTALL_STRIP_FLAG =
        !            52: transform = @program_transform_name@
        !            53:
        !            54: NORMAL_INSTALL = :
        !            55: PRE_INSTALL = :
        !            56: POST_INSTALL = :
        !            57: NORMAL_UNINSTALL = :
        !            58: PRE_UNINSTALL = :
        !            59: POST_UNINSTALL = :
        !            60:
        !            61: @SET_MAKE@
        !            62: build_alias = @build_alias@
        !            63: build_triplet = @build@
        !            64: host_alias = @host_alias@
        !            65: host_triplet = @host@
        !            66: target_alias = @target_alias@
        !            67: target_triplet = @target@
        !            68: AMDEP = @AMDEP@
        !            69: AMTAR = @AMTAR@
        !            70: AR = @AR@
        !            71: AS = @AS@
        !            72: AWK = @AWK@
        !            73: CALLING_CONVENTIONS_OBJS = @CALLING_CONVENTIONS_OBJS@
        !            74: CC = @CC@
        !            75: CCAS = @CCAS@
        !            76: CPP = @CPP@
        !            77: CXX = @CXX@
        !            78: CXXCPP = @CXXCPP@
        !            79: DEPDIR = @DEPDIR@
        !            80: DLLTOOL = @DLLTOOL@
        !            81: EXEEXT = @EXEEXT@
        !            82: LIBTOOL = @LIBTOOL@
        !            83: LN_S = @LN_S@
        !            84: M4 = @M4@
        !            85: MAINT = @MAINT@
        !            86: MAKEINFO = @MAKEINFO@
        !            87: OBJDUMP = @OBJDUMP@
        !            88: OBJEXT = @OBJEXT@
        !            89: PACKAGE = @PACKAGE@
        !            90: RANLIB = @RANLIB@
        !            91: SPEED_CYCLECOUNTER_OBJS = @SPEED_CYCLECOUNTER_OBJS@
        !            92: STRIP = @STRIP@
        !            93: U = @U@
        !            94: VERSION = @VERSION@
        !            95: gmp_srclinks = @gmp_srclinks@
        !            96: install_sh = @install_sh@
        !            97: mpn_objects = @mpn_objects@
        !            98: mpn_objs_in_libgmp = @mpn_objs_in_libgmp@
        !            99:
        !           100: # Copyright (C) 2000 Free Software Foundation, Inc.
        !           101: #
        !           102: # This file is part of the GNU MP Library.
        !           103: #
        !           104: # The GNU MP Library is free software; you can redistribute it and/or modify
        !           105: # it under the terms of the GNU Library General Public License as published by
        !           106: # the Free Software Foundation; either version 2 of the License, or (at your
        !           107: # option) any later version.
        !           108: #
        !           109: # The GNU MP Library is distributed in the hope that it will be useful, but
        !           110: # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
        !           111: # or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Library General Public
        !           112: # License for more details.
        !           113: #
        !           114: # You should have received a copy of the GNU Library General Public License
        !           115: # along with the GNU MP Library; see the file COPYING.LIB.  If not, write to
        !           116: # the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
        !           117: # MA 02111-1307, USA.
        !           118:
        !           119:
        !           120: AUTOMAKE_OPTIONS = gnu no-dependencies
        !           121:
        !           122: SUBDIRS = tests
        !           123:
        !           124: INCLUDES = -I$(top_srcdir)
        !           125:
        !           126: @WANT_MPFR_TRUE@noinst_LTLIBRARIES = @WANT_MPFR_TRUE@libmpfr.la
        !           127:
        !           128: # FIXME: Add rnd_mode.c when it's clean.
        !           129: libmpfr_la_SOURCES = \
        !           130:        add.c div_2exp.c neg.c set_dfl_prec.c set_str_raw.c agm.c get_str.c \
        !           131:        print_raw.c set_dfl_rnd.c sqrt.c clear.c init.c set_f.c \
        !           132:        sub.c cmp.c mul.c round.c set_prec.c cmp_ui.c mul_2exp.c set.c \
        !           133:        set_si.c div.c mul_ui.c set_d.c pow.c out_str.c pi.c set_z.c \
        !           134:        add_ulp.c log2.c random.c log.c exp.c div_ui.c zeta.c karadiv.c \
        !           135:        karasqrt.c print_rnd_mode.c
        !           136:
        !           137:
        !           138: EXTRA_DIST = mpfr.h mpfr-impl.h
        !           139: subdir = mpfr
        !           140: mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
        !           141: CONFIG_HEADER = ../config.h
        !           142: CONFIG_CLEAN_FILES =
        !           143: LTLIBRARIES =  $(noinst_LTLIBRARIES)
        !           144:
        !           145:
        !           146: DEFS = @DEFS@ -I. -I$(srcdir) -I..
        !           147: CPPFLAGS = @CPPFLAGS@
        !           148: LDFLAGS = @LDFLAGS@
        !           149: LIBS = @LIBS@
        !           150: libmpfr_la_LDFLAGS =
        !           151: libmpfr_la_LIBADD =
        !           152: am_libmpfr_la_OBJECTS =  add.lo div_2exp.lo neg.lo set_dfl_prec.lo \
        !           153: set_str_raw.lo agm.lo get_str.lo print_raw.lo set_dfl_rnd.lo sqrt.lo \
        !           154: clear.lo init.lo set_f.lo sub.lo cmp.lo mul.lo round.lo set_prec.lo \
        !           155: cmp_ui.lo mul_2exp.lo set.lo set_si.lo div.lo mul_ui.lo set_d.lo pow.lo \
        !           156: out_str.lo pi.lo set_z.lo add_ulp.lo log2.lo random.lo log.lo exp.lo \
        !           157: div_ui.lo zeta.lo karadiv.lo karasqrt.lo print_rnd_mode.lo
        !           158: libmpfr_la_OBJECTS =  $(am_libmpfr_la_OBJECTS)
        !           159: COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
        !           160: LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
        !           161: CFLAGS = @CFLAGS@
        !           162: CCLD = $(CC)
        !           163: LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
        !           164: DIST_SOURCES =  $(libmpfr_la_SOURCES)
        !           165: DIST_COMMON =  README Makefile.am Makefile.in
        !           166:
        !           167:
        !           168: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
        !           169:
        !           170: GZIP_ENV = --best
        !           171: depcomp =
        !           172: SOURCES = $(libmpfr_la_SOURCES)
        !           173: OBJECTS = $(am_libmpfr_la_OBJECTS)
        !           174:
        !           175: all: all-redirect
        !           176: .SUFFIXES:
        !           177: .SUFFIXES: .c .lo .o .obj
        !           178: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
        !           179:        cd $(top_srcdir) && $(AUTOMAKE) --gnu mpfr/Makefile
        !           180:
        !           181: Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
        !           182:        cd $(top_builddir) \
        !           183:          && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
        !           184:
        !           185:
        !           186: mostlyclean-noinstLTLIBRARIES:
        !           187:
        !           188: clean-noinstLTLIBRARIES:
        !           189:        -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
        !           190:
        !           191: distclean-noinstLTLIBRARIES:
        !           192:
        !           193: maintainer-clean-noinstLTLIBRARIES:
        !           194:
        !           195: mostlyclean-compile:
        !           196:        -rm -f *.o core *.core
        !           197:        -rm -f *.$(OBJEXT)
        !           198:
        !           199: clean-compile:
        !           200:
        !           201: distclean-compile:
        !           202:        -rm -f *.tab.c
        !           203:
        !           204: maintainer-clean-compile:
        !           205:
        !           206: mostlyclean-libtool:
        !           207:        -rm -f *.lo
        !           208:
        !           209: clean-libtool:
        !           210:        -rm -rf .libs _libs
        !           211:
        !           212: distclean-libtool:
        !           213:
        !           214: maintainer-clean-libtool:
        !           215:
        !           216: libmpfr.la: $(libmpfr_la_OBJECTS) $(libmpfr_la_DEPENDENCIES)
        !           217:        $(LINK)  $(libmpfr_la_LDFLAGS) $(libmpfr_la_OBJECTS) $(libmpfr_la_LIBADD) $(LIBS)
        !           218: .c.o:
        !           219:        $(COMPILE) -c $<
        !           220: .c.obj:
        !           221:        $(COMPILE) -c `cygpath -w $<`
        !           222: .c.lo:
        !           223:        $(LTCOMPILE) -c -o $@ $<
        !           224:
        !           225: # This directory's subdirectories are mostly independent; you can cd
        !           226: # into them and run `make' without going through this Makefile.
        !           227: # To change the values of `make' variables: instead of editing Makefiles,
        !           228: # (1) if the variable is set in `config.status', edit `config.status'
        !           229: #     (which will cause the Makefiles to be regenerated when you run `make');
        !           230: # (2) otherwise, pass the desired values on the `make' command line.
        !           231:
        !           232: all-recursive install-data-recursive install-exec-recursive \
        !           233: installdirs-recursive install-recursive uninstall-recursive  \
        !           234: check-recursive installcheck-recursive info-recursive dvi-recursive:
        !           235:        @set fnord $(MAKEFLAGS); amf=$$2; \
        !           236:        dot_seen=no; \
        !           237:        target=`echo $@ | sed s/-recursive//`; \
        !           238:        list='$(SUBDIRS)'; for subdir in $$list; do \
        !           239:          echo "Making $$target in $$subdir"; \
        !           240:          if test "$$subdir" = "."; then \
        !           241:            dot_seen=yes; \
        !           242:            local_target="$$target-am"; \
        !           243:          else \
        !           244:            local_target="$$target"; \
        !           245:          fi; \
        !           246:          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
        !           247:           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
        !           248:        done; \
        !           249:        if test "$$dot_seen" = "no"; then \
        !           250:          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
        !           251:        fi; test -z "$$fail"
        !           252:
        !           253: mostlyclean-recursive clean-recursive distclean-recursive \
        !           254: maintainer-clean-recursive:
        !           255:        @set fnord $(MAKEFLAGS); amf=$$2; \
        !           256:        dot_seen=no; \
        !           257:        rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
        !           258:          rev="$$subdir $$rev"; \
        !           259:          if test "$$subdir" = "."; then dot_seen=yes; else :; fi; \
        !           260:        done; \
        !           261:        test "$$dot_seen" = "no" && rev=". $$rev"; \
        !           262:        target=`echo $@ | sed s/-recursive//`; \
        !           263:        for subdir in $$rev; do \
        !           264:          echo "Making $$target in $$subdir"; \
        !           265:          if test "$$subdir" = "."; then \
        !           266:            local_target="$$target-am"; \
        !           267:          else \
        !           268:            local_target="$$target"; \
        !           269:          fi; \
        !           270:          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
        !           271:           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
        !           272:        done && test -z "$$fail"
        !           273: tags-recursive:
        !           274:        list='$(SUBDIRS)'; for subdir in $$list; do \
        !           275:          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
        !           276:        done
        !           277:
        !           278: tags: TAGS
        !           279:
        !           280: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
        !           281:        list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
        !           282:        unique=`for i in $$list; do \
        !           283:            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
        !           284:          done | \
        !           285:          $(AWK) '    { files[$$0] = 1; } \
        !           286:               END { for (i in files) print i; }'`; \
        !           287:        mkid -f$$here/ID $$unique $(LISP)
        !           288:
        !           289: TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
        !           290:                $(TAGS_FILES) $(LISP)
        !           291:        tags=; \
        !           292:        here=`pwd`; \
        !           293:        list='$(SUBDIRS)'; for subdir in $$list; do \
        !           294:    if test "$$subdir" = .; then :; else \
        !           295:            test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
        !           296:    fi; \
        !           297:        done; \
        !           298:        list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
        !           299:        unique=`for i in $$list; do \
        !           300:            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
        !           301:          done | \
        !           302:          $(AWK) '    { files[$$0] = 1; } \
        !           303:               END { for (i in files) print i; }'`; \
        !           304:        test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
        !           305:          || etags $(ETAGS_ARGS) $$tags  $$unique $(LISP)
        !           306:
        !           307: mostlyclean-tags:
        !           308:
        !           309: clean-tags:
        !           310:
        !           311: distclean-tags:
        !           312:        -rm -f TAGS ID
        !           313:
        !           314: maintainer-clean-tags:
        !           315:
        !           316: distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
        !           317:
        !           318: distdir: $(DISTFILES)
        !           319:        @for file in $(DISTFILES); do \
        !           320:          d=$(srcdir); \
        !           321:          if test -d $$d/$$file; then \
        !           322:            cp -pR $$d/$$file $(distdir); \
        !           323:          else \
        !           324:            test -f $(distdir)/$$file \
        !           325:            || cp -p $$d/$$file $(distdir)/$$file || :; \
        !           326:          fi; \
        !           327:        done
        !           328:        for subdir in $(SUBDIRS); do \
        !           329:          if test "$$subdir" = .; then :; else \
        !           330:            test -d $(distdir)/$$subdir \
        !           331:            || mkdir $(distdir)/$$subdir \
        !           332:            || exit 1; \
        !           333:            (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
        !           334:              || exit 1; \
        !           335:          fi; \
        !           336:        done
        !           337: info-am:
        !           338: info: info-recursive
        !           339: dvi-am:
        !           340: dvi: dvi-recursive
        !           341: check-am: all-am
        !           342: check: check-recursive
        !           343: installcheck-am:
        !           344: installcheck: installcheck-recursive
        !           345: install-exec-am:
        !           346: install-exec: install-exec-recursive
        !           347:
        !           348: install-data-am:
        !           349: install-data: install-data-recursive
        !           350:
        !           351: install-am: all-am
        !           352:        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
        !           353: install: install-recursive
        !           354: uninstall-am:
        !           355: uninstall: uninstall-recursive
        !           356: all-am: Makefile $(LTLIBRARIES)
        !           357: all-redirect: all-recursive
        !           358: install-strip:
        !           359:        $(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
        !           360: installdirs: installdirs-recursive
        !           361: installdirs-am:
        !           362:
        !           363:
        !           364: mostlyclean-generic:
        !           365:
        !           366: clean-generic:
        !           367:
        !           368: distclean-generic:
        !           369:        -rm -f Makefile $(CONFIG_CLEAN_FILES)
        !           370:        -rm -f config.cache config.log stamp-h stamp-h[0-9]*
        !           371:
        !           372: maintainer-clean-generic:
        !           373:        -rm -f Makefile.in
        !           374: mostlyclean-am:  mostlyclean-noinstLTLIBRARIES mostlyclean-compile \
        !           375:                mostlyclean-libtool mostlyclean-tags \
        !           376:                mostlyclean-generic
        !           377:
        !           378: mostlyclean: mostlyclean-recursive
        !           379:
        !           380: clean-am:  clean-noinstLTLIBRARIES clean-compile clean-libtool \
        !           381:                clean-tags clean-generic mostlyclean-am
        !           382:
        !           383: clean: clean-recursive
        !           384:
        !           385: distclean-am:  distclean-noinstLTLIBRARIES distclean-compile \
        !           386:                distclean-libtool distclean-tags distclean-generic \
        !           387:                clean-am
        !           388:        -rm -f libtool
        !           389:
        !           390: distclean: distclean-recursive
        !           391:
        !           392: maintainer-clean-am:  maintainer-clean-noinstLTLIBRARIES \
        !           393:                maintainer-clean-compile maintainer-clean-libtool \
        !           394:                maintainer-clean-tags maintainer-clean-generic \
        !           395:                distclean-am
        !           396:        @echo "This command is intended for maintainers to use;"
        !           397:        @echo "it deletes files that may require special tools to rebuild."
        !           398:
        !           399: maintainer-clean: maintainer-clean-recursive
        !           400:
        !           401: .PHONY: mostlyclean-noinstLTLIBRARIES distclean-noinstLTLIBRARIES \
        !           402: clean-noinstLTLIBRARIES maintainer-clean-noinstLTLIBRARIES \
        !           403: mostlyclean-compile distclean-compile clean-compile \
        !           404: maintainer-clean-compile mostlyclean-libtool distclean-libtool \
        !           405: clean-libtool maintainer-clean-libtool install-recursive \
        !           406: uninstall-recursive install-data-recursive uninstall-data-recursive \
        !           407: install-exec-recursive uninstall-exec-recursive installdirs-recursive \
        !           408: uninstalldirs-recursive all-recursive check-recursive \
        !           409: installcheck-recursive info-recursive dvi-recursive \
        !           410: mostlyclean-recursive distclean-recursive clean-recursive \
        !           411: maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
        !           412: distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
        !           413: dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
        !           414: install-exec install-data-am install-data install-am install \
        !           415: uninstall-am uninstall all-redirect all-am all install-strip \
        !           416: installdirs-am installdirs mostlyclean-generic distclean-generic \
        !           417: clean-generic maintainer-clean-generic clean mostlyclean distclean \
        !           418: maintainer-clean
        !           419:
        !           420:
        !           421: # Tell versions [3.59,3.63) of GNU make to not export all variables.
        !           422: # Otherwise a system limit (for SysV at least) may be exceeded.
        !           423: .NOEXPORT:

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>