Annotation of OpenXM_contrib/gmp/mpn/alpha/ev6/nails/addmul_2.asm, Revision 1.1
1.1 ! ohara 1: dnl Alpha ev6 nails mpn_addmul_2.
! 2:
! 3: dnl Copyright 2002 Free Software Foundation, Inc.
! 4: dnl
! 5: dnl This file is part of the GNU MP Library.
! 6: dnl
! 7: dnl The GNU MP Library is free software; you can redistribute it and/or
! 8: dnl modify it under the terms of the GNU Lesser General Public License as
! 9: dnl published by the Free Software Foundation; either version 2.1 of the
! 10: dnl License, or (at your option) any later version.
! 11: dnl
! 12: dnl The GNU MP Library is distributed in the hope that it will be useful,
! 13: dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
! 14: dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
! 15: dnl Lesser General Public License for more details.
! 16: dnl
! 17: dnl You should have received a copy of the GNU Lesser General Public
! 18: dnl License along with the GNU MP Library; see the file COPYING.LIB. If
! 19: dnl not, write to the Free Software Foundation, Inc., 59 Temple Place -
! 20: dnl Suite 330, Boston, MA 02111-1307, USA.
! 21:
! 22: include(`../config.m4')
! 23:
! 24: dnl INPUT PARAMETERS
! 25: define(`rp',`r16')
! 26: define(`up',`r17')
! 27: define(`n',`r18')
! 28: define(`vp',`r19')
! 29:
! 30: dnl Useful register aliases
! 31: define(`numb_mask',`r24')
! 32: define(`ulimb',`r25')
! 33: define(`rlimb',`r27')
! 34:
! 35: define(`m0a',`r0')
! 36: define(`m0b',`r1')
! 37: define(`m1a',`r2')
! 38: define(`m1b',`r3')
! 39:
! 40: define(`acc0',`r4')
! 41: define(`acc1',`r5')
! 42:
! 43: define(`v0',`r6')
! 44: define(`v1',`r7')
! 45:
! 46: dnl Used for temps: r8 r19 r28
! 47:
! 48: define(`NAIL_BITS',`GMP_NAIL_BITS')
! 49: define(`NUMB_BITS',`GMP_NUMB_BITS')
! 50:
! 51: dnl This declaration is munged by configure
! 52: NAILS_SUPPORT(3-63)
! 53:
! 54: dnl Runs at 4.0 cycles/limb. With unrolling, the ulimb load and the 3
! 55: dnl bookkeeping increments and the `bis' that copies from r21 to r5 could be
! 56: dnl removed and the instruction count reduced from 21 to to 16. We could
! 57: dnl thereby reach about 2.3 cycles/limb.
! 58:
! 59: dnl If this is going to be a Karatsuba basecase building block, we need some
! 60: dnl of the combinations below. That way, we won't ever hit the
! 61: dnl slower mpn_addmul_1 for any huge multiplication.
! 62: dnl
! 63: dnl Alt 3 Alt 4 Alt 5 Alt 6
! 64: dnl addmul_2 addmul_2 addmul_3 addmul_3
! 65: dnl addmul_3 addmul_3 addmul_4 addmul_4
! 66: dnl addmul_4 addmul_5 addmul_5
! 67: dnl addmul_6
! 68:
! 69: dnl Register usage:
! 70: dnl callee-saves: r9 r10 r11 r12 r13 r14 r15
! 71: dnl scratch: r0 r1 r2 r3 r4 r5 r6 r7 r8
! 72: dnl r16 r17 r18 r19 r20 r21 r22 r23 r24 r25 r27 r28
! 73: dnl return address: 26
! 74: dnl global pointer: 29
! 75: dnl stack pointer: 30
! 76:
! 77: ASM_START()
! 78: PROLOGUE(mpn_addmul_2)
! 79: lda numb_mask,-1(r31)
! 80: srl numb_mask,NAIL_BITS,numb_mask
! 81:
! 82: ldq v0, 0(vp)
! 83: ldq v1, 8(vp)
! 84:
! 85: bis r31, r31, acc0 C zero acc0
! 86: sll v0,NAIL_BITS, v0
! 87: bis r31, r31, acc1 C zero acc1
! 88: sll v1,NAIL_BITS, v1
! 89: bis r31, r31, r19
! 90:
! 91: C MAIN LOOP
! 92: ldq ulimb, 0(up)
! 93: lda up, 8(up)
! 94: mulq v0, ulimb, m0a C U1
! 95: umulh v0, ulimb, m0b C U1
! 96: mulq v1, ulimb, m1a C U1
! 97: umulh v1, ulimb, m1b C U1
! 98: lda n, -1(n)
! 99: beq n, Lend C U0
! 100: ALIGN(16)
! 101: Loop:
! 102: bis r31, r31, r31 C nop
! 103: ldq rlimb, 0(rp)
! 104: ldq ulimb, 0(up)
! 105: addq r19, acc0, acc0 C propagate nail
! 106:
! 107: lda rp, 8(rp)
! 108: srl m0a,NAIL_BITS,r8 C U0
! 109: lda up, 8(up)
! 110: mulq v0, ulimb, m0a C U1
! 111:
! 112: addq r8, acc0, r19
! 113: addq m0b, acc1, acc0
! 114: umulh v0, ulimb, m0b C U1
! 115: bis r31, r31, r31 C nop
! 116:
! 117: addq rlimb, r19, r19
! 118: srl m1a,NAIL_BITS,r8 C U0
! 119: bis r31, r31, r31 C nop
! 120: mulq v1, ulimb, m1a C U1
! 121:
! 122: addq r8, acc0, acc0
! 123: bis r31, m1b, acc1
! 124: umulh v1, ulimb, m1b C U1
! 125: and r19,numb_mask, r28 C extract numb part
! 126:
! 127: lda n, -1(n)
! 128: srl r19,NUMB_BITS, r19 C extract nail part
! 129: stq r28, -8(rp)
! 130: bne n, Loop C U0
! 131: C END LOOP
! 132: Lend:
! 133: ldq rlimb, 0(rp)
! 134: addq r19, acc0, acc0 C propagate nail
! 135: lda rp, 8(rp)
! 136: srl m0a,NAIL_BITS,r8 C U0
! 137: addq r8, acc0, r19
! 138: addq m0b, acc1, acc0
! 139: addq rlimb, r19, r19
! 140: srl m1a,NAIL_BITS,r8 C U0
! 141: addq r8, acc0, acc0
! 142: bis r31, m1b, acc1
! 143: and r19,numb_mask, r28 C extract limb
! 144:
! 145: srl r19,NUMB_BITS, r19 C extract nail
! 146: stq r28, -8(rp)
! 147:
! 148: addq r19, acc0, acc0 C propagate nail
! 149: and acc0,numb_mask, r28
! 150: stq r28, 0(rp)
! 151: srl acc0,NUMB_BITS, r19
! 152: addq r19, acc1, r0
! 153:
! 154: ret r31, (r26), 1
! 155: EPILOGUE(mpn_addmul_2)
! 156: ASM_END()
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>