File: [local] / OpenXM_contrib / gmp / mpn / sparc64 / Attic / README (download)
Revision 1.1.1.2 (vendor branch), Mon Aug 25 16:06:26 2003 UTC (21 years ago) by ohara
Branch: GMP
CVS Tags: VERSION_4_1_2, RELEASE_1_2_3, RELEASE_1_2_2_KNOPPIX_b, RELEASE_1_2_2_KNOPPIX Changes since 1.1.1.1: +92 -35
lines
Import gmp 4.1.2
|
Copyright 1997, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
This file is part of the GNU MP Library.
The GNU MP Library is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or (at your
option) any later version.
The GNU MP Library is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License
along with the GNU MP Library; see the file COPYING.LIB. If not, write to
the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA.
This directory contains mpn functions for 64-bit V9 SPARC
RELEVANT OPTIMIZATION ISSUES
Notation:
IANY = shift/add/sub/logical/sethi
IADDLOG = add/sub/logical/sethi
MEM = ld*/st*
FA = fadd*/fsub*/f*to*/fmov*
FM = fmul*
UltraSPARC-1/2 can issue four instructions per cycle, with these restrictions:
* Two IANY instructions, but only one of these may be a shift. If there is a
shift and an IANY instruction, the shift must precede the IANY instruction.
* One FA.
* One FM.
* One branch.
* One MEM.
* IANY/IADDLOG/MEM must be insn 1, 2, or 3 in an issue bundle. Taken branches
should not be in slot 4, since that makes the delay insn come from separate
bundle.
* If two IANY/IADDLOG instructions are to be executed in the same cycle and one
of these is setting the condition codes, that instruction must be the second
one.
To summarize, ignoring branches, these are the bundles that can reach the peak
execution speed:
insn1 iany iany mem iany iany mem iany iany mem
insn2 iaddlog mem iany mem iaddlog iany mem iaddlog iany
insn3 mem iaddlog iaddlog fa fa fa fm fm fm
insn4 fa/fm fa/fm fa/fm fm fm fm fa fa fa
The 64-bit integer multiply instruction mulx takes from 5 cycles to 35 cycles,
depending on the position of the most significant bit of the first source
operand. When used for 32x32->64 multiplication, it needs 20 cycles.
Furthermore, it stalls the processor while executing. We stay away from that
instruction, and instead use floating-point operations.
Integer conditional move instructions cannot dual-issue with other integer
instructions. No conditional move can issue 1-5 cycles after a load. (Or
something such bizarre.) Useless.
The UltraSPARC-3 pipeline seems similar, but is somewhat more rigid. Branches
execute slower, and there may be other new stalls. Integer multiply doesn't
halt the CPU and also has a much lower latency. But it's still not pipelined,
and thus useless for our needs.
STATUS
(Timings are for UltraSPARC-1/2. UltraSPARC-3 is a few cycles slower.)
* mpn_lshift, mpn_rshift: The current code runs at 2.0 cycles/limb. The IEU0
functional unit is saturated with shifts.
* mpn_add_n, mpn_sub_n: The current code runs at 4 cycles/limb. The 4
instruction recurrency is the speed limiter.
* mpn_addmul_1: The current code runs at 14 cycles/limb asymptotically. The
code sustains 4 instructions/cycle. It might be possible to invent a better
way of summing the intermediate 49-bit operands, but it is unlikely that it
will save enough instructions to save an entire cycle.
The load-use of the `rlimb' operand is not enough scheduled for good L2 cache
performance. Since UltraSPARC-1/2 L1 cache is direct mapped, we miss to L2
very often. The load-use of the std/ldx pairs via the stack are somewhat
over-scheduled.
It would be possible to save two instructions: (1) The `mov' could be avoided
if ths std/ldx were less scheduled. (2) The ldx of `rlimb' could be split
into two `ld' instructions, saving the shifts/masks.
* mpn_mul_1: The current code is a straightforward edit of the mpn_addmul_1
code. It would be possible to shave one or two cycles from it, with some
labour.
* mpn_submul_1: Braindead code just calling mpn_mul_1 + mpn_sub_n. It would be
possible to either match the mpn_addmul_1 performance, or in the worst case
use one more instruction group.
* mpn_Xmul_2: These could be made to run at 9 cycles/limb. Straightforward
generalization of mpn_Xmul_1.