Annotation of OpenXM_contrib/gmp/mpn/x86/k6/k62mmx/lshift.asm, Revision 1.1
1.1 ! maekawa 1: dnl AMD K6-2 mpn_lshift -- mpn left shift.
! 2: dnl
! 3: dnl K6-2: 1.75 cycles/limb
! 4:
! 5:
! 6: dnl Copyright (C) 1999, 2000 Free Software Foundation, Inc.
! 7: dnl
! 8: dnl This file is part of the GNU MP Library.
! 9: dnl
! 10: dnl The GNU MP Library is free software; you can redistribute it and/or
! 11: dnl modify it under the terms of the GNU Lesser General Public License as
! 12: dnl published by the Free Software Foundation; either version 2.1 of the
! 13: dnl License, or (at your option) any later version.
! 14: dnl
! 15: dnl The GNU MP Library is distributed in the hope that it will be useful,
! 16: dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
! 17: dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
! 18: dnl Lesser General Public License for more details.
! 19: dnl
! 20: dnl You should have received a copy of the GNU Lesser General Public
! 21: dnl License along with the GNU MP Library; see the file COPYING.LIB. If
! 22: dnl not, write to the Free Software Foundation, Inc., 59 Temple Place -
! 23: dnl Suite 330, Boston, MA 02111-1307, USA.
! 24:
! 25:
! 26: include(`../config.m4')
! 27:
! 28:
! 29: C mp_limb_t mpn_lshift (mp_ptr dst, mp_srcptr src, mp_size_t size,
! 30: C unsigned shift);
! 31: C
! 32:
! 33: defframe(PARAM_SHIFT,16)
! 34: defframe(PARAM_SIZE, 12)
! 35: defframe(PARAM_SRC, 8)
! 36: defframe(PARAM_DST, 4)
! 37: deflit(`FRAME',0)
! 38:
! 39: dnl used after src has been fetched
! 40: define(VAR_RETVAL,`PARAM_SRC')
! 41:
! 42: dnl minimum 9, because unrolled loop can't handle less
! 43: deflit(UNROLL_THRESHOLD, 9)
! 44:
! 45: .text
! 46: ALIGN(32)
! 47:
! 48: PROLOGUE(mpn_lshift)
! 49: deflit(`FRAME',0)
! 50:
! 51: C The 1 limb case can be done without the push %ebx, but it's then
! 52: C still the same speed. The push is left as a free helping hand for
! 53: C the two_or_more code.
! 54:
! 55: movl PARAM_SIZE, %eax
! 56: pushl %ebx FRAME_pushl()
! 57:
! 58: movl PARAM_SRC, %ebx
! 59: decl %eax
! 60:
! 61: movl PARAM_SHIFT, %ecx
! 62: jnz L(two_or_more)
! 63:
! 64: movl (%ebx), %edx C src limb
! 65: movl PARAM_DST, %ebx
! 66:
! 67: shldl( %cl, %edx, %eax) C return value
! 68:
! 69: shll %cl, %edx
! 70:
! 71: movl %edx, (%ebx) C dst limb
! 72: popl %ebx
! 73:
! 74: ret
! 75:
! 76:
! 77: C -----------------------------------------------------------------------------
! 78: ALIGN(16) C avoid offset 0x1f
! 79: L(two_or_more):
! 80: C eax size-1
! 81: C ebx src
! 82: C ecx shift
! 83: C edx
! 84:
! 85: movl (%ebx,%eax,4), %edx C src high limb
! 86: negl %ecx
! 87:
! 88: movd PARAM_SHIFT, %mm6
! 89: addl $32, %ecx C 32-shift
! 90:
! 91: shrl %cl, %edx
! 92: cmpl $UNROLL_THRESHOLD-1, %eax
! 93:
! 94: movl %edx, VAR_RETVAL
! 95: jae L(unroll)
! 96:
! 97:
! 98: movd %ecx, %mm7
! 99: movl %eax, %ecx
! 100:
! 101: movl PARAM_DST, %eax
! 102:
! 103: L(simple):
! 104: C eax dst
! 105: C ebx src
! 106: C ecx counter, size-1 to 1
! 107: C edx retval
! 108: C
! 109: C mm0 scratch
! 110: C mm6 shift
! 111: C mm7 32-shift
! 112:
! 113: movq -4(%ebx,%ecx,4), %mm0
! 114:
! 115: psrlq %mm7, %mm0
! 116:
! 117: Zdisp( movd, %mm0, 0,(%eax,%ecx,4))
! 118: loop L(simple)
! 119:
! 120:
! 121: movd (%ebx), %mm0
! 122: popl %ebx
! 123:
! 124: psllq %mm6, %mm0
! 125:
! 126: movd %mm0, (%eax)
! 127: movl %edx, %eax
! 128:
! 129: femms
! 130: ret
! 131:
! 132:
! 133: C -----------------------------------------------------------------------------
! 134: ALIGN(16)
! 135: L(unroll):
! 136: C eax size-1
! 137: C ebx src
! 138: C ecx 32-shift
! 139: C edx retval (but instead VAR_RETVAL is used)
! 140: C
! 141: C mm6 shift
! 142:
! 143: addl $32, %ecx
! 144: movl PARAM_DST, %edx
! 145:
! 146: movd %ecx, %mm7
! 147: subl $7, %eax C size-8
! 148:
! 149: leal (%edx,%eax,4), %ecx C alignment of dst
! 150:
! 151: movq 32-8(%ebx,%eax,4), %mm2 C src high qword
! 152: testb $4, %cl
! 153:
! 154: jz L(dst_aligned)
! 155: psllq %mm6, %mm2
! 156:
! 157: psrlq $32, %mm2
! 158: decl %eax
! 159:
! 160: movd %mm2, 32(%edx,%eax,4) C dst high limb
! 161: movq 32-8(%ebx,%eax,4), %mm2 C new src high qword
! 162: L(dst_aligned):
! 163:
! 164: movq 32-16(%ebx,%eax,4), %mm0 C src second highest qword
! 165:
! 166:
! 167: C This loop is the important bit, the rest is just support for it.
! 168: C Four src limbs are held at the start, and four more will be read.
! 169: C Four dst limbs will be written. This schedule seems necessary for
! 170: C full speed.
! 171: C
! 172: C The use of size-8 lets the loop stop when %eax goes negative and
! 173: C leaves -4 to -1 which can be tested with test $1 and $2.
! 174:
! 175: L(top):
! 176: C eax counter, size-8 step by -4 until <0
! 177: C ebx src
! 178: C ecx
! 179: C edx dst
! 180: C
! 181: C mm0 src next qword
! 182: C mm1 scratch
! 183: C mm2 src prev qword
! 184: C mm6 shift
! 185: C mm7 64-shift
! 186:
! 187: psllq %mm6, %mm2
! 188: subl $4, %eax
! 189:
! 190: movq %mm0, %mm1
! 191: psrlq %mm7, %mm0
! 192:
! 193: por %mm0, %mm2
! 194: movq 24(%ebx,%eax,4), %mm0
! 195:
! 196: psllq %mm6, %mm1
! 197: movq %mm2, 40(%edx,%eax,4)
! 198:
! 199: movq %mm0, %mm2
! 200: psrlq %mm7, %mm0
! 201:
! 202: por %mm0, %mm1
! 203: movq 16(%ebx,%eax,4), %mm0
! 204:
! 205: movq %mm1, 32(%edx,%eax,4)
! 206: jnc L(top)
! 207:
! 208:
! 209: C Now have four limbs in mm2 (prev) and mm0 (next), plus eax mod 4.
! 210: C
! 211: C 8(%ebx) is the next source, and 24(%edx) is the next destination.
! 212: C %eax is between -4 and -1, representing respectively 0 to 3 extra
! 213: C limbs that must be read.
! 214:
! 215:
! 216: testl $2, %eax C testl to avoid bad cache line crossing
! 217: jz L(finish_nottwo)
! 218:
! 219: C Two more limbs: lshift mm2, OR it with rshifted mm0, mm0 becomes
! 220: C new mm2 and a new mm0 is loaded.
! 221:
! 222: psllq %mm6, %mm2
! 223: movq %mm0, %mm1
! 224:
! 225: psrlq %mm7, %mm0
! 226: subl $2, %eax
! 227:
! 228: por %mm0, %mm2
! 229: movq 16(%ebx,%eax,4), %mm0
! 230:
! 231: movq %mm2, 32(%edx,%eax,4)
! 232: movq %mm1, %mm2
! 233: L(finish_nottwo):
! 234:
! 235:
! 236: C lshift mm2, OR with rshifted mm0, mm1 becomes lshifted mm0
! 237:
! 238: testb $1, %al
! 239: psllq %mm6, %mm2
! 240:
! 241: movq %mm0, %mm1
! 242: psrlq %mm7, %mm0
! 243:
! 244: por %mm0, %mm2
! 245: psllq %mm6, %mm1
! 246:
! 247: movq %mm2, 24(%edx,%eax,4)
! 248: jz L(finish_even)
! 249:
! 250:
! 251: C Size is odd, so mm1 and one extra limb to process.
! 252:
! 253: movd (%ebx), %mm0 C src[0]
! 254: popl %ebx
! 255: deflit(`FRAME',0)
! 256:
! 257: movq %mm0, %mm2
! 258: psllq $32, %mm0
! 259:
! 260: psrlq %mm7, %mm0
! 261:
! 262: psllq %mm6, %mm2
! 263: por %mm0, %mm1
! 264:
! 265: movq %mm1, 4(%edx) C dst[1,2]
! 266: movd %mm2, (%edx) C dst[0]
! 267:
! 268: movl VAR_RETVAL, %eax
! 269:
! 270: femms
! 271: ret
! 272:
! 273:
! 274: nop C avoid bad cache line crossing
! 275: L(finish_even):
! 276: deflit(`FRAME',4)
! 277: C Size is even, so only mm1 left to process.
! 278:
! 279: movq %mm1, (%edx) C dst[0,1]
! 280: movl VAR_RETVAL, %eax
! 281:
! 282: popl %ebx
! 283: femms
! 284: ret
! 285:
! 286: EPILOGUE()
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>