File: [local] / OpenXM_contrib / gmp / mpn / x86 / p6 / Attic / aorsmul_1.asm (download)
Revision 1.1.1.1 (vendor branch), Sat Sep 9 14:12:43 2000 UTC (23 years, 11 months ago) by maekawa
Branch: GMP
CVS Tags: maekawa-ipv6, VERSION_3_1_1, VERSION_3_1, RELEASE_1_2_2, RELEASE_1_2_1, RELEASE_1_1_3 Changes since 1.1: +0 -0
lines
Import gmp 3.1
|
dnl Intel P6 mpn_addmul_1/mpn_submul_1 -- add or subtract mpn multiple.
dnl
dnl P6: 6.35 cycles/limb (at 16 limbs/loop).
dnl Copyright (C) 1999, 2000 Free Software Foundation, Inc.
dnl
dnl This file is part of the GNU MP Library.
dnl
dnl The GNU MP Library is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Lesser General Public License as
dnl published by the Free Software Foundation; either version 2.1 of the
dnl License, or (at your option) any later version.
dnl
dnl The GNU MP Library is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl Lesser General Public License for more details.
dnl
dnl You should have received a copy of the GNU Lesser General Public
dnl License along with the GNU MP Library; see the file COPYING.LIB. If
dnl not, write to the Free Software Foundation, Inc., 59 Temple Place -
dnl Suite 330, Boston, MA 02111-1307, USA.
include(`../config.m4')
dnl P6 UNROLL_COUNT cycles/limb
dnl 8 6.7
dnl 16 6.35
dnl 32 6.3
dnl 64 6.3
dnl Maximum possible with the current code is 64.
deflit(UNROLL_COUNT, 16)
ifdef(`OPERATION_addmul_1', `
define(M4_inst, addl)
define(M4_function_1, mpn_addmul_1)
define(M4_function_1c, mpn_addmul_1c)
define(M4_description, add it to)
define(M4_desc_retval, carry)
',`ifdef(`OPERATION_submul_1', `
define(M4_inst, subl)
define(M4_function_1, mpn_submul_1)
define(M4_function_1c, mpn_submul_1c)
define(M4_description, subtract it from)
define(M4_desc_retval, borrow)
',`m4_error(`Need OPERATION_addmul_1 or OPERATION_submul_1
')')')
MULFUNC_PROLOGUE(mpn_addmul_1 mpn_addmul_1c mpn_submul_1 mpn_submul_1c)
C mp_limb_t M4_function_1 (mp_ptr dst, mp_srcptr src, mp_size_t size,
C mp_limb_t mult);
C mp_limb_t M4_function_1c (mp_ptr dst, mp_srcptr src, mp_size_t size,
C mp_limb_t mult, mp_limb_t carry);
C
C Calculate src,size multiplied by mult and M4_description dst,size.
C Return the M4_desc_retval limb from the top of the result.
C
C This code is pretty much the same as the K6 code. The unrolled loop is
C the same, but there's just a few scheduling tweaks in the setups and the
C simple loop.
C
C A number of variations have been tried for the unrolled loop, with one or
C two carries, and with loads scheduled earlier, but nothing faster than 6
C cycles/limb has been found.
ifdef(`PIC',`
deflit(UNROLL_THRESHOLD, 5)
',`
deflit(UNROLL_THRESHOLD, 5)
')
defframe(PARAM_CARRY, 20)
defframe(PARAM_MULTIPLIER,16)
defframe(PARAM_SIZE, 12)
defframe(PARAM_SRC, 8)
defframe(PARAM_DST, 4)
.text
ALIGN(32)
PROLOGUE(M4_function_1c)
pushl %ebx
deflit(`FRAME',4)
movl PARAM_CARRY, %ebx
jmp LF(M4_function_1,start_nc)
EPILOGUE()
PROLOGUE(M4_function_1)
push %ebx
deflit(`FRAME',4)
xorl %ebx, %ebx C initial carry
L(start_nc):
movl PARAM_SIZE, %ecx
pushl %esi
deflit(`FRAME',8)
movl PARAM_SRC, %esi
pushl %edi
deflit(`FRAME',12)
movl PARAM_DST, %edi
pushl %ebp
deflit(`FRAME',16)
cmpl $UNROLL_THRESHOLD, %ecx
movl PARAM_MULTIPLIER, %ebp
jae L(unroll)
C simple loop
C this is offset 0x22, so close enough to aligned
L(simple):
C eax scratch
C ebx carry
C ecx counter
C edx scratch
C esi src
C edi dst
C ebp multiplier
movl (%esi), %eax
addl $4, %edi
mull %ebp
addl %ebx, %eax
adcl $0, %edx
M4_inst %eax, -4(%edi)
movl %edx, %ebx
adcl $0, %ebx
decl %ecx
leal 4(%esi), %esi
jnz L(simple)
popl %ebp
popl %edi
popl %esi
movl %ebx, %eax
popl %ebx
ret
C------------------------------------------------------------------------------
C VAR_JUMP holds the computed jump temporarily because there's not enough
C registers when doing the mul for the initial two carry limbs.
C
C The add/adc for the initial carry in %ebx is necessary only for the
C mpn_add/submul_1c entry points. Duplicating the startup code to
C eliminiate this for the plain mpn_add/submul_1 doesn't seem like a good
C idea.
dnl overlapping with parameters already fetched
define(VAR_COUNTER,`PARAM_SIZE')
define(VAR_JUMP, `PARAM_DST')
C this is offset 0x43, so close enough to aligned
L(unroll):
C eax
C ebx initial carry
C ecx size
C edx
C esi src
C edi dst
C ebp
movl %ecx, %edx
decl %ecx
subl $2, %edx
negl %ecx
shrl $UNROLL_LOG2, %edx
andl $UNROLL_MASK, %ecx
movl %edx, VAR_COUNTER
movl %ecx, %edx
C 15 code bytes per limb
ifdef(`PIC',`
call L(pic_calc)
L(here):
',`
shll $4, %edx
negl %ecx
leal L(entry) (%edx,%ecx,1), %edx
')
movl (%esi), %eax C src low limb
movl %edx, VAR_JUMP
leal ifelse(UNROLL_BYTES,256,128+) 4(%esi,%ecx,4), %esi
mull %ebp
addl %ebx, %eax C initial carry (from _1c)
adcl $0, %edx
movl %edx, %ebx C high carry
leal ifelse(UNROLL_BYTES,256,128) (%edi,%ecx,4), %edi
movl VAR_JUMP, %edx
testl $1, %ecx
movl %eax, %ecx C low carry
cmovnz( %ebx, %ecx) C high,low carry other way around
cmovnz( %eax, %ebx)
jmp *%edx
ifdef(`PIC',`
L(pic_calc):
shll $4, %edx
negl %ecx
C See README.family about old gas bugs
leal (%edx,%ecx,1), %edx
addl $L(entry)-L(here), %edx
addl (%esp), %edx
ret
')
C -----------------------------------------------------------
ALIGN(32)
L(top):
deflit(`FRAME',16)
C eax scratch
C ebx carry hi
C ecx carry lo
C edx scratch
C esi src
C edi dst
C ebp multiplier
C
C VAR_COUNTER loop counter
C
C 15 code bytes per limb
addl $UNROLL_BYTES, %edi
L(entry):
deflit(CHUNK_COUNT,2)
forloop(`i', 0, UNROLL_COUNT/CHUNK_COUNT-1, `
deflit(`disp0', eval(i*4*CHUNK_COUNT ifelse(UNROLL_BYTES,256,-128)))
deflit(`disp1', eval(disp0 + 4))
Zdisp( movl, disp0,(%esi), %eax)
mull %ebp
Zdisp( M4_inst,%ecx, disp0,(%edi))
adcl %eax, %ebx
movl %edx, %ecx
adcl $0, %ecx
movl disp1(%esi), %eax
mull %ebp
M4_inst %ebx, disp1(%edi)
adcl %eax, %ecx
movl %edx, %ebx
adcl $0, %ebx
')
decl VAR_COUNTER
leal UNROLL_BYTES(%esi), %esi
jns L(top)
deflit(`disp0', eval(UNROLL_BYTES ifelse(UNROLL_BYTES,256,-128)))
M4_inst %ecx, disp0(%edi)
movl %ebx, %eax
popl %ebp
popl %edi
popl %esi
popl %ebx
adcl $0, %eax
ret
EPILOGUE()