[BACK]Return to 0INSTALL CVS log [TXT][DIR] Up to [local] / OpenXM_contrib / gnuplot

Diff for /OpenXM_contrib/gnuplot/Attic/0INSTALL between version 1.1 and 1.1.1.2

version 1.1, 2000/01/09 17:00:48 version 1.1.1.2, 2000/01/22 14:15:47
Line 52  several different ways:
Line 52  several different ways:
   
  o with configure's --prefix= option, eg.   o with configure's --prefix= option, eg.
    ./configure --prefix=/gnuplot     ./configure --prefix=/gnuplot
    Attention: This affects the location of *all* installed files!     gnuplot will look for the online help file, gnuplot.gih, in /gnuplot/share.
      Attention: This option affects the location of *all* installed files!
   
  o with configure's --datadir= option, eg.   o with configure's --datadir= option, eg.
    ./configure --datadir='/gnuplot/docs'     ./configure --datadir='/gnuplot/docs'
      gnuplot will look for the online help file, gnuplot.gih, in /gnuplot/docs.
   
  o at make time, eg.   o at make time, eg.
    make HELPFILE='/gnuplot/docs/gnuplot.gih'     make HELPFILE='/gnuplot/docs/gnuplot.gih'
      gnuplot will look for the online help file /gnuplot/docs/gnupot.gih.
   
  o at execution time by specifying the helpfile with the environment   o at execution time by specifying the helpfile with the environment
    variable GNUHELP (see "Environment Variables" below).     variable GNUHELP (see "Environment Variables" below).
Line 68  ways:
Line 71  ways:
   
  o with configure's --prefix= option, eg.   o with configure's --prefix= option, eg.
    ./configure --prefix=/gnuplot     ./configure --prefix=/gnuplot
      gnuplot will be installed as /gnuplot/bin/gnuplot.
    Attention: This affects the location of *all* installed files!     Attention: This affects the location of *all* installed files!
   
  o with configure's --bindir= option, eg.   o with configure's --bindir= option, eg.
    ./configure --bindir='/gnuplot/bin'     ./configure --bindir='/gnuplot/bin'
      gnuplot will be installed as /gnuplot/bin/gnuplot.
   
  o at make time, eg.   o at make time, eg.
    make GNUPLOT_BINDIR='/gnuplot/bin'     make BINDIR='/gnuplot/bin'
      gnuplot will be installed as /gnuplot/bin/gnuplot.
   
    If the executables are not installed in the default location, files     If the executables are not installed in the default location, files
 written by the `save' command cannot be used as scripts on Un*x platforms.  written by the `save' command cannot be used as scripts on Un*x platforms.
Line 121  $ ./configure --help
Line 127  $ ./configure --help
   --libdir=DIR            object code libraries in DIR [EPREFIX/lib]    --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
   --includedir=DIR        C header files in DIR [PREFIX/include]    --includedir=DIR        C header files in DIR [PREFIX/include]
   --mandir=DIR            Man documentation in DIR [PREFIX/man]    --mandir=DIR            Man documentation in DIR [PREFIX/man]
   --without-readline      Do not use the included readline function    --with-readline (*)     use the builtin minimal readline function
   --with-gnu-readline     Use the GNU readline version  If you don't use this,    --without-readline      do not use the builtin readline function
                           you won't have file name completion.    --with-readline=gnu     use the GNU readline library
   --with-gnu-readline=PATH        Specify the location of libreadline.    --with-readline=PATH            Specify the location of GNU readline
                           Use this form if your libreadline is not installed  
                           where your linker can find it.  
   --with-plot             use the Unix plot library    --with-plot             use the Unix plot library
   --with-plot=PATH                Specify the location of GNU libplot    --with-plot=PATH                Specify the location of GNU libplot
   --with-gd (*)           Enable gif terminal with Tom Boutell's gd library    --with-gd (*)           Enable gif terminal with Tom Boutell's gd library
Line 135  $ ./configure --help
Line 139  $ ./configure --help
   --with-png (*)          Enable png terminal    --with-png (*)          Enable png terminal
                           (requires libpng and libz)                            (requires libpng and libz)
   --with-png=PATH                 Specify the location of libpng    --with-png=PATH                 Specify the location of libpng
   --with-cwdrc            Check current directory for .gnuplotrc file,    --with-cwdrc            check current directory for .gnuplot file,
                           normally disabled for security reasons. However,                            normally disabled for security reasons
                           the home directory is always checked for a    --with-lasergnu         install lasergnu printer script
                           .gnuplotrc file.    --with-linux-vga        use the Linux SVGA console driver
   --with-lasergnu         Install lasergnu printer script                            (requires /usr/lib/libvga)
   --without-linux-vga (*) Do not use the Linux console driver  
                           (requires Linux SVGAlib /usr/lib/libvga)  
   --enable-apollo         Apollo Graphics Primitive Resource    --enable-apollo         Apollo Graphics Primitive Resource
   --enable-gpr            Apollo Graphics Primitive Resource (fixed-size window)    --enable-gpr            Apollo Graphics Primitive Resource (fixed-size window)
   --enable-cgi            enable CGI terminal (SCO only)    --enable-cgi            enable CGI terminal (SCO only)
Line 184  Unix, no configure
Line 186  Unix, no configure
 VMS  VMS
 ---  ---
   
    On VMS, invoke MAKE_VMS.COM (or BUILDVMS.COM if you have MMS or MMK     On VMS, you can use MMS, MMK, or another make utility, or you can
 but don't want to use the supplied DESCRIP.MMS).  You may get warnings  use BUILDVMS.COM.  The supplied files work with Alpha/VMS V6.2 and
 or more serious errors depending on the versions of the C compiler, the  DECC V5.7; you may get warnings or more serious errors depending on
 C run-time libraries, and {Open}VMS on your system.  the versions of the C compiler, the C run-time libraries, and VMS on
   your system.
   
     To compile using MMK:
        MMK/DESCRIPTION=MAKEFILE.VMS
     To compile using MMS on VAX:
        MMS/DESCRIPTION=MAKEFILE.VMS
     To compile using MMS on Alpha:
        MMS/DESCRIPTION=MAKEFILE.VMS/MACRO=__ALPHA__=1
   
   To compile using DEC MMS or MMK (PD clone),    Alternatively, you can use MAKE_VMS.COM.  This command file will run
      invoke MMS or MMK with the supplied descrip.mms  MMK or MMS to build gnuplot.  If you don't have either one installed, it
   Or if you have a unix-like make utility  will use the command file.  The first parameter on the command line is
      copy makefile.vms makefile  the compiler you want to use (default DECC).
      make  
     It may sometimes be useful to add  `/IGNORE=WARNING' to the `MMS' call.
   
     To compile using GNUC or VAXC:
        add /MACRO=GNUC or /MACRO=VAXC to the above command
     To compile with another make utility:
        check the documentation of your utility to specify the description
        file and any necessary macros (__ALPHA__, GNUC, or VAXC)
   Or if you don't have a suitable make:    Or if you don't have a suitable make:
      @buildvms       @BUILDVMS
   To tell gnuplot where to find the help library:    To tell gnuplot where to find the help library:
       $ define gnuplot$help disk:[directory]gnuplot.hlb       $ define gnuplot$help disk:[directory]gnuplot.hlb
   Alternatively (and preferably) put the help in the main system help library.    Alternatively, put the help in the main system help library.
   
 AmigaOS  AmigaOS
 -------  -------
Line 208  Using Aztec C 5.2a
Line 224  Using Aztec C 5.2a
       make -f makefile.ami        make -f makefile.ami
 Using SAS/C 6.1 or later versions  Using SAS/C 6.1 or later versions
       smake -f makefile.amg        smake -f makefile.amg
         You can also copy makefile.amg to smakefile and just type `smake'.
   
         At the beginning of makefile.amg you will find a configuration
         section where you have to adjust all settings which control the build
         process. Most important is probably to select the terminal devices
         which should be supported. You can create a version offering
         png graphics as well as gif support. Use the appropriate settings
         for CPU and MATH to compile for a specific machine type.
         Be sure to enable only those devices for which you have the
         necessary software already installed. Also ensure that the
         libraries and the sources are all compiled using the same
         settings for CPU and MATH.
 Using gcc: see Unix  Using gcc: see Unix
   
 Atari/TOS  Atari/TOS
Line 238  Using Borland C++ 3.1 and compiling for MS-Windows
Line 266  Using Borland C++ 3.1 and compiling for MS-Windows
   Put wgnuplot.exe, wgnuplot.dll, wgnuplot.hlp and wgnuplot.mnu    Put wgnuplot.exe, wgnuplot.dll, wgnuplot.hlp and wgnuplot.mnu
   in the windows directory.    in the windows directory.
   
   Using Visual C++ and compiling for Windows NT/95/98
         nmake -f makefile.nt
    or
         copy makefile.nt makefile
         nmake
   
 Using the MinGW32 port of egcs: you need the Micrsoft SDK for the  Using the MinGW32 port of egcs: you need the Micrsoft SDK for the
 moment.  moment.
       copy makefile.mgw makefile        copy makefile.mgw makefile
Line 335  The CGI drivers need the CGIPATH environment variable 
Line 369  The CGI drivers need the CGIPATH environment variable 
 to the CGI agents, and the CGIDISP and/or CGIPRNT environment variables  to the CGI agents, and the CGIDISP and/or CGIPRNT environment variables
 to set the output devices.  to set the output devices.
   
  If using dynamically linked executables with the X11 Window System, it   If creating dynamically linked executables for the X11 Window System, it
 may be necessary to define LD_LIBRARY_PATH - see man ld for details.  may be necessary to add flags to the LIBS variable in Makefile
 It is, however, prefered to use the appropriate linker options, eg.  to make sure gnuplot finds all required libraries at runtime.  Systems like
 -R under Solaris, or -rpath under DEC Unix and Irix.  SunOS and Solaris use -R to specify the runtime library search path, whereas
   OSF/Dec Unix, Irix and Linux use -rpath. If this is not possible, the
   LD_LIBRARY_PATH environment variable should be set.
   
 About --with-PACKAGE[=PATH]  About --with-PACKAGE[=PATH]
 ***************************  ***************************
Line 570  $ gnuplot
Line 606  $ gnuplot
   
         G N U P L O T          G N U P L O T
         Unix version 3.7          Unix version 3.7
         patchlevel 0          patchlevel 1
         last modified Tue Jan 12 13:48:06 BST 1999          last modified Tue Jan 12 13:48:06 BST 1999
   
         Copyright(C) 1986 - 1993, 1998          Copyright(C) 1986 - 1993, 1998

Legend:
Removed from v.1.1  
changed lines
  Added in v.1.1.1.2

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>