Annotation of OpenXM_contrib/gnuplot/buildvms.com, Revision 1.1.1.1
1.1 maekawa 1: $ ! for batch operation, set default to the gnuplot directory
2: $ !
3: $ ! buildvms.com
4: $ ! Command file to compile/link gnuplot, gnuplot_x11, and make gnuplot.hlb
5: $ !
6: $ ! lph: modified for compatibility with VMS 4.x (which lacks 'if ... endif'),
7: $ ! but made the default DECC
8: $ !
9: $! set noon
10: $ ON ERROR THEN GOTO FINISH
11: $!
12: $! detect compiler - drd
13: $! if DECC is around, assume that, else gcc is preferred. Finally vaxc
14: $ its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "")
15: $ its_gnuc = 0 ! comment out the next line to use VAXC if gcc is also present
16: $ its_gnuc = .not.its_decc .and. (f$trnlnm("gnu_cc").nes."")
17: $ its_vaxc = .not. (its_decc .or. its_gnuc)
18: $ its_decw = (f$trnlnm("DECW$INCLUDE") .nes. "")
19: $!
20: $! configure
21: $
22: $ pfix = "/prefix=all"
23: $ rtl = "DECCRTL"
24: $ if .NOT. its_decc then pfix = "/nolist"
25: $ if .NOT. its_decc then rtl = "VAXCRTL"
26: $!
27: $ x11 = ""
28: $ if its_decw then x11 = "X11,"
29: $!
30: $!-----------------------------------------------------------------
31: $!-----------------------------------------------------------------
32: $! customize CFLAGS for version of VMS, CRTL, and C compiler.
33: $!-----------------------------------------------------------------
34: $! these defines work for OpenVMS Alpha v6.2 and DEC C v5.3
35: $ CFLAGS = "/define=(ANSI_C,HAVE_LGAMMA,HAVE_ERF,HAVE_UNISTD_H,HAVE_GETCWD,HAVE_SLEEP,"-
36: +"''x11'NO_GIH,PIPES,DECCRTL)''pfix'/warnings=disable=ADDRCONSTEXT"
37: $!
38: $!-----------------------------------------------------------------
39: $!
40: $! A generic starting point
41: $!-----------------------------------------------------------------
42: $!
43: $!$ CFLAGS = "/NOWARN/NOOP/DEFINE=(''x11'NO_GIH,PIPES,''rtl')''pfix'"
44: $!
45: $! ----------------------------------------------------------------
46: $!
47: $! For VMS 4.7 and VAX C v2.4
48: $! ("Compiler abort - virtual memory limits exceeded" if attempt
49: $! to include all applicable terminals, but otherwise builds OK.
50: $! Runtime problem: an exit handler error, also w/ gcc build;
51: $! a VAXCRTL atexit bug?)
52: $!
53: $! Note: VAX uses D_FLOAT, maximum exponent ca 10e +/- 38;
54: $! will cause problems with some of the demos
55: $!
56: $!$ CFLAGS = "/NOOP/DEFINE=(NO_STRSTR, NO_SYS_TYPES_H, "-
57: $! +"HAVE_GETCWD, HAVE_SLEEP, NO_LOCALE_H,"-
58: $! +"SHORT_TERMLIST, NO_GIH,PIPES, ''rtl')"
59: $!$!
60: $!
61: $!-----------------------------------------------------------------
62: $!
63: $! This will build with gcc v1.42 on VMS 4.7
64: $! (no virtual memory limit problem)
65: $!
66: $! gcc v1.42 string.h can prefix str routines w/ gnu_ (ifdef GCC_STRINGS)
67: $! but the routines in GCCLIB are not prefixed w/ gcc_ :-(
68: $! link with GCCLIB, then ignore the link warnings about multiple
69: $! definitions of STR... in C$STRINGS
70: $!
71: $! GCC v1.42 has a locale.h, but neither gcc nor VMS v4.7 VAXCRTL has
72: $! the setlocale function
73: $!
74: $!
75: $! Note: _assert.c defines assert_gcc, if ndef NDEBUG, but
76: $! cgm.trm undefines NDEBUG, so we always compile/link _assert.c
77: $!
78: $!$ CFLAGS = "/NOOP/DEFINE=(''x11'NO_STRSTR, HAVE_GETCWD,"-
79: $! +" HAVE_SLEEP, NO_LOCALE_H, NO_GIH, PIPES, ''rtl')"
80: $!
81: $!-----------------------------------------------------------------
82: $!-----------------------------------------------------------------
83: $!
84: $ TERMFLAGS = "/INCLUDE=([],[.term])"
85: $
86: $ EXTRALIB = ""
87: $ if its_gnuc then cc := GCC/NOCASE
88: $ if its_gnuc then EXTRALIB = ",[]_assert,GNU_CC:[000000]GCCLIB/LIB"
89: $
90: $
91: $ CFLAGS="''cflags'" + "''pfix'"
92: $ LINKOPT=""
93: $!
94: $ if .NOT. its_decc then -
95: LINKOPT=",sys$disk:[]linkopt.vms/opt"
96: $!
97: $!
98: $ if its_decw then DEFINE/NOLOG X11 DECW$INCLUDE
99: $ if its_decw then DEFINE/NOLOG SYS SYS$LIBRARY
100: $!
101: $ set verify
102: $ cc 'CFLAGS' alloc.c
103: $ cc 'CFLAGS' binary.c
104: $ cc 'CFLAGS' bitmap.c
105: $ cc 'CFLAGS' command.c
106: $ cc 'CFLAGS' contour.c
107: $ cc 'CFLAGS' datafile.c
108: $ cc 'CFLAGS' eval.c
109: $ cc 'CFLAGS' fit.c
110: $ cc 'CFLAGS' graphics.c
111: $ cc 'CFLAGS' graph3d.c
112: $ cc 'CFLAGS' hidden3d.c
113: $ cc 'CFLAGS' internal.c
114: $ cc 'CFLAGS' interpol.c
115: $ cc 'CFLAGS' matrix.c
116: $ cc 'cflags' misc.c
117: $ cc 'CFLAGS' parse.c
118: $ cc 'CFLAGS' plot.c
119: $ cc 'CFLAGS' plot2d.c
120: $ cc 'CFLAGS' plot3d.c
121: $ cc 'CFLAGS' scanner.c
122: $ cc 'CFLAGS' set.c
123: $ cc 'CFLAGS' show.c
124: $ cc 'CFLAGS' specfun.c
125: $ cc 'CFLAGS' standard.c
126: $ cc 'CFLAGS' stdfn.c
127: $ cc 'cflags' 'TERMFLAGS' term.c
128: $ cc 'cflags' time.c
129: $ cc 'CFLAGS' util.c
130: $ cc 'CFLAGS' util3d.c
131: $ cc 'CFLAGS' version.c
132: $ cc 'CFLAGS' vms.c
133: $ if its_gnuc then cc 'CFLAGS' GNU_CC_INCLUDE:[000000]_assert.c
134: $!
135: $ link/exe=gnuplot -
136: bitmap,command,contour,eval,graphics,graph3d,vms,-
137: binary,specfun,interpol,fit,matrix,internal,misc,parse,-
138: plot,plot2d,plot3d,scanner,set,show,datafile,alloc,-
139: standard,stdfn,term,util,version,util3d,hidden3d,time'extralib''LINKOPT'
140: $!
141: $ cc 'CFLAGS' bf_test.c
142: $ link /exe=bf_test bf_test,binary,alloc 'extralib''LINKOPT'
143: $ ren bf_test.exe [.demo]
144: $ if .NOT. its_decw then goto do_docs
145: $!
146: $ CC 'CFLAGS' GPLT_X11 stdfn.c
147: $ LINK /exe=GNUPLOT_X11 gplt_x11,stdfn 'extralib''LINKOPT',SYS$INPUT:/OPT
148: SYS$SHARE:DECW$XLIBSHR/SHARE
149: $!
150: $DO_DOCS:
151: $ SET DEF [.DOCS]
152: $ if f$locate("ALL_TERM_DOC",CFLAGS).ne.f$length(CFLAGS) then -
153: copy /concatenate [-.term]*.trm []allterm.h
154: $ cc 'CFLAGS' /OBJ=doc2rnh.obj/include=([],[-],[-.term]) doc2rnh.c
155: $ SET DEF [-] ! LINKOPT is defined as being in []
156: $ link [.docs]doc2rnh /exe=[.docs]doc2rnh 'extralib''LINKOPT'
157: $ doc2rnh := $sys$disk:[.docs]doc2rnh
158: $ doc2rnh [.docs]gnuplot.doc [.docs]gnuplot.rnh
159: $ RUNOFF [.docs]gnuplot.rnh
160: $ library/create/help sys$disk:[]gnuplot.hlb gnuplot.hlp
161: $!
162: $ run [.demo]bf_test
163: $ if its_decw then -
164: write sys$output "%define GNUPLOT_X11 :== $Disk:[directory]GNUPLOT_X11"
165: $!
166: $FINISH:
167: $ set noverify
168: $ if its_decw then deassign x11
169: $ exit
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to buildvms.com CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM_contrib / gnuplot