Return to makefile.amg CVS log

Up to [local] / OpenXM_contrib / gnuplot

Initial revision

# Makefile for SAS/C 6.1 or better on the Amiga
#
# $Id: makefile.amg,v 1.29 1998/04/14 00:15:50 drd Exp $
#
#

CC = sc

# Remove 'MATH=IEEE' if you don't want to use the better Commodore
# math-routines. If you do so, you'll have to change 'scmieee.lib'
# to 'scm.lib' in the gnuplot and bf_test target lines below.
# I am guessing the syntax here : I want to define GP_INLINE=__inline.
# If you have SAS/C 6.57 or newer, you may wish to disable warning 317
# too. Just add it in the COPTS line.
OFLAGS = opt
DEFS   = def=AMIGA_SC_6_1 def=ANSI_C def=HAVE_SYS_STAT_H def=HAVE_STRNICMP def=HAVE_GETCWD def=PIPES def=GP_INLINE=__inline
COPTS  = idir=term data=f math=i ign=304+306 #noerrhigh #errrexx
DEBUG  = # Will be dbg=sf when called with smake -f makefile.amg debug
CFLAGS = $(COPTS) $(DEFS) $(OFLAGS) $(DEBUG)
LNDBG  = # Will be addsym when called with smake -f makefile.amg debug

# The directories where gnuplot and gnuplot.gih go:

DEST     = C:
HELPDEST = S:

# To simplify the handling of files that have grown so large that they
# must be compiled with the code=far option, the rules below have been
# set up. Now, if a file grows large, you only have to change its
# extension from .o to .oo, and the file will be compiled correctly.
# This must be done in the OBJS-variable below and in the corresponding 
# dependency-rule near the end of the file.


# Normal compilation rule
.c.o:
	$(CC) $(CFLAGS) objname=$@ $<

# Compilation rule for large files
.c.oo:
	$(CC) $(CFLAGS) code=f objname=$@ $<

OBJS = alloc.o amiga.o binary.o bitmap.o command.o contour.o datafile.o \
       eval.o fit.o graph3d.o graphics.oo help.o hidden3d.o internal.o \
       interpol.o matrix.o misc.o parse.o plot.o plot2d.o plot3d.o scanner.o \
       set.oo show.o specfun.o standard.o stdfn.o term.oo time.o util.o \
       util3d.o version.o

CSOURCE1 = alloc.c bf_test.c binary.c bitmap.c command.c set.c show.c 
CSOURCE2 = help.c graphics.c graph3d.o internal.c 
CSOURCE3 = misc.c eval.c parse.c plot.c plot2d.c plot3d.c scanner.c \
	standard.c stdfn.c 
CSOURCE4 = bitmap.c term.c util.c util3d.c version.c interpol.c fit.c matrix.c
CSOURCE5 = term/ai.trm term/amiga.trm term/aed.trm term/atariaes.trm \
	term/atarivdi.trm term/cgi.trm term/corel.trm \
	term/djsvga.trm term/dumb.trm term/dxf.trm term/dxy.trm \
	term/debug.trm term/eepic.trm term/epson.trm term/excl.trm \
	term/fig.trm term/hp26.trm term/hp2648.trm term/hpgl.trm  \
	term/hpljii.trm term/metafont.trm\
	term/apollo.trm term/gpr.trm term/hppj.trm term/compact.c 
CSOURCE6 = term/impcodes.h term/imagen.trm term/next.trm term/object.h \
	term/iris4d.trm term/kyo.trm term/latex.trm term/mif.trm \
	term/pbm.trm term/pc.trm 
CSOURCE7 = term/post.trm term/pstricks.trm term/qms.trm term/regis.trm \
	term/rgip.trm term/sun.trm\
	term/t410x.trm term/tek.trm term/texdraw.trm\
	term/tgif.trm term/tpic.trm \
	term/unixpc.trm term/unixplot.trm \
	term/v384.trm term/vws.trm term/x11.trm term/xlib.trm
CSOURCE8 = contour.c specfun.c amiga.c
CORETERM = $(CSOURCE5) $(CSOURCE6) $(CSOURCE7)


all: gnuplot demo/bf_test

gnuplot: $(OBJS)
	slink from lib:c.o $(OBJS) to gnuplot\
	lib lib:scmieee.lib lib:scnb.lib $(LNDBG)

demo/bf_test: bf_test.o binary.o alloc.o
	slink from lib:c.o bf_test.o binary.o alloc.o to demo/bf_test\
	lib lib:scmieee.lib lib:scnb.lib
	@echo "*N*NRun bf_test in demo subdirectory to make binary demo files*N"

docs: docs/gnuplot.doc docs/doc2gih docs/doc2tex docs/doc2ms docs/checkdoc
	docs/doc2gih <docs/gnuplot.doc >docs/gnuplot.gih

docs/doc2gih: docs/doc2gih.c docs/termdoc.c
	$(CC) $(CFLAGS) idir= link to docs/doc2gih docs/doc2gih.c docs/termdoc.c

docs/doc2tex: docs/doc2tex.c docs/allterm.h docs/termdoc.c
	$(CC) $(CFLAGS) def=ALL_TERM_DOC idir= link to docs/doc2tex docs/doc2tex.c docs/termdoc.c

docs/doc2ms: docs/doc2ms.c docs/allterm.h docs/termdoc.c
	$(CC) $(CFLAGS) def=ALL_TERM_DOC idir= link to docs/doc2ms docs/doc2ms.c docs/termdoc.c

docs/checkdoc: docs/checkdoc.c docs/allterm.h docs/termdoc.c 
	$(CC) $(CFLAGS) def=ALL_TERM_DOC idir= link to docs/checkdoc docs/checkdoc.c docs/termdoc.c

docs/allterm.h: $(CORETERM)
	join term/\#?.trm as docs/allterm.h


alloc.o: alloc.c plot.h
amiga.o: amiga.c
bf_test.o: bf_test.c
binary.o: binary.c plot.h
bitmap.o: bitmap.c bitmap.h plot.h
command.o: command.c plot.h setshow.h help.h
contour.o: contour.c plot.h
datafile.o: datafile.c plot.h fnproto.h binary.h setshow.h
eval.o: eval.c plot.h
fit.o: fit.c fit.h matrix.h plot.h
graph3d.o: graph3d.c plot.h setshow.h
graphics.oo: graphics.c plot.h setshow.h
help.o: help.c plot.h help.h
hidden3d.o: hidden3d.c plot.h setshow.h
internal.o: internal.c plot.h
interpol.o: interpol.c plot.h setshow.h
matrix.o: matrix.c matrix.h fit.h
misc.o: misc.c plot.h setshow.h help.h
parse.o: parse.c plot.h help.h
plot.o: plot.c plot.h setshow.h
plot2d.o: plot2d.c plot.h setshow.h fit.h binary.h help.h
plot3d.o: plot3d.c plot.h setshow.h binary.h help.h
scanner.o: scanner.c plot.h
set.oo: set.c plot.h setshow.h
show.o: show.c plot.h setshow.h
specfun.o: specfun.c plot.h
standard.o: standard.c plot.h
stdfn.o: stdfn.c stdfn.h
term.oo: term.c term.h plot.h setshow.h bitmap.h $(CSOURCE5) $(CSOURCE6) $(CSOURCE7)
time.o: time.c plot.h setshow.h
util.o: util.c plot.h
util3d.o: util3d.c plot.h setshow.h
version.o: version.c


clean:
	@-delete $(OBJS) bf_test.o binary.o quiet
	@-delete docs/\#?.o docs/\#?.lnk quiet

veryclean: clean
	@-delete demo/binary[1-3] fitdemo/fit.log quiet
	@-delete bf_test demo/fit.log gnuplot docs/gnuplot.gih quiet
	@-delete docs/doc2gih docs/doc2tex docs/doc2ms docs/checkdoc quiet

install: gnuplot docs/gnuplot.gih
	copy docs/gnuplot.gih $(HELPDEST)
	copy gnuplot $(DEST)

debug:
	smake -f makefile.amg DEBUG=dbg=sf LNDBG=addsym OFLAGS= all