Annotation of OpenXM_contrib/gnuplot/makefile.os2, Revision 1.1
1.1 ! maekawa 1: #
! 2: # $Id: makefile.os2,v 1.27 1998/04/14 00:15:54 drd Exp $
! 3: #
! 4: # Makefile for use with emx (and above) and GNUMake
! 5: # on OS/2 3.0 and above (might also work for OS/2 2.x)
! 6: #
! 7: # last modification date: 19981205
! 8: #
! 9:
! 10: # We depend on using cmd.exe (or a compatible one)
! 11: SHELL=cmd.exe
! 12:
! 13: #
! 14: # ***************** Begin of Configuration section ***************************
! 15: #
! 16:
! 17: # Comment out the definition lines to disable the according features:
! 18:
! 19: # X11 driver
! 20: # requires installed XFree86
! 21: X11=1
! 22:
! 23: # GD (GIF) device driver
! 24: # requires GD library (not part of gnuplot)
! 25: GD=1
! 26:
! 27: # PNG device driver
! 28: # requires PNG and Z libraries (not part of gnuplot)
! 29: PNG=1
! 30:
! 31: # VESAkit support
! 32: # requires SVGA- and VESA Kit (not part of gnuplot)
! 33: VESA=1
! 34:
! 35: # GNU_ReadLine support
! 36: # requires GNU readline library (static or DLL; not part of gnuplot)
! 37: GNU_RL=1
! 38:
! 39: # DEBUGging support
! 40: # creates binaries suitable for debugging. Some bugs may come and go
! 41: # as opposed to a production build since we lower the optimization level
! 42: # DEBUG=1
! 43:
! 44: # MOUSE support for PM terminal
! 45: # (not yet supported in official release)
! 46: # MOUSE=1
! 47:
! 48: #
! 49: # ****************** End of Configuration section ****************************
! 50: #
! 51:
! 52: #
! 53: # Miscellaneous setup
! 54: #
! 55:
! 56: .PHONY: all runtime alldocs demo binaries infomin clean veryclean
! 57: .SUFFIXES: .c .trm .o .obj .exe
! 58:
! 59: # seems to be a reasonable default ...
! 60: default: runtime
! 61:
! 62: # a help screen
! 63: help:
! 64: @echo " Usage: $(MAKE) -f makefile.os2 target"
! 65: @echo " target is one of:"
! 66: @echo " all runtime alldocs demo binaries infomin help clean veryclean"
! 67:
! 68: #
! 69: # Definitions of flags and symbols used by makefile.all and makefile.os2
! 70: #
! 71:
! 72: # these definitions are used by makefile.all
! 73: T=term/
! 74: D=docs/
! 75: L=$(D)latextut/
! 76: M=demo/
! 77:
! 78: #
! 79: # Definitions valid for all targets on OS/2
! 80: #
! 81:
! 82: OS2DIR = os2
! 83: DOCDIR = docs
! 84: DEMODIR=demo
! 85: TERMDIR=term
! 86:
! 87: OS2TERMS= $(TERMDIR)\pm.trm
! 88: ifdef X11
! 89: OS2TERMS += $(TERMDIR)\x11.trm
! 90: endif
! 91: ifdef VESA
! 92: OS2TERMS += $(TERMDIR)\emxvga.trm
! 93: endif
! 94:
! 95:
! 96: # where to place gnuplot.gih helpfile
! 97: HELPFILE = gnuplot.gih
! 98:
! 99: #
! 100: # 3 sets of variables are defined and used to create
! 101: # (1): gnuplot.exe
! 102: # 2 : gnupmdrv.exe (the PM-driver executable)
! 103: # 3 : utilities like doc2*.exe, bf_test.exe, ...
! 104: #
! 105: CC = gcc
! 106: CC2 = gcc
! 107: CC3 = gcc
! 108: O = o
! 109: O2 = obj
! 110: O3 = o
! 111:
! 112: # Flags for compiler and linker under OS/2
! 113: OS2FLAGS = -DOS2 -DHELPFILE=\"$(HELPFILE)\"
! 114:
! 115: # Flags for compiling with EMX/GCC
! 116: # Special note: -ffloat-store is necessary to avoid some
! 117: # strange behaviour (confirmed for gcc 2.7.x and graphics.c)
! 118: EMXSPECIFIC = -ffloat-store -DREADLINE -DHAVE_STRNICMP -DPIPES -DHAVE_STRERROR -DHAVE_SYS_SELECT_H -DHAVE_SYS_STAT_H
! 119: LIBS =
! 120: ifdef GNU_RL
! 121: EMXSPECIFIC += -DGNU_READLINE
! 122: LIBS += -lreadline -ltermcap
! 123: endif
! 124:
! 125: #
! 126: # Choose flags suitable for a debugging or for a production build
! 127: #
! 128: ifdef DEBUG
! 129: CFLAGS = -g $(OS2FLAGS) $(EMXSPECIFIC) -Wall -Wno-comment -O0 -Zmt
! 130: LFLAGS = -g -Zcrtdll -Zmt
! 131: CFLAGS2 = -g $(OS2FLAGS) $(EMXSPECIFIC) -Zomf -Zsys -Zmt -Wall -O0
! 132: LFLAGS2 = -g -Zomf -Zmt -Zcrtdll
! 133: CFLAGS3 = -g $(OS2FLAGS) $(EMXSPECIFIC) -Wall -Wno-comment -O0
! 134: LFLAGS3 = -g
! 135: else
! 136: CFLAGS = $(OS2FLAGS) $(EMXSPECIFIC) -O2 -Wall -Wno-unused -Wno-comment -Zmt
! 137: LFLAGS = -s -Zcrtdll -Zmt
! 138: CFLAGS2 = $(OS2FLAGS) $(EMXSPECIFIC) -Zomf -Zcrtdll -Zmt -O2 -Wall -Wno-unused
! 139: LFLAGS2 = -s -Zomf -Zmt -Zsys
! 140: CFLAGS3 = $(OS2FLAGS) $(EMXSPECIFIC) -O2 -Wall -Wno-unused -Wno-comment
! 141: LFLAGS3 = -s
! 142: endif
! 143:
! 144: #
! 145: # Settings for the terminals to be included
! 146: #
! 147: TERMFLAGS = -I. -I$(T)
! 148:
! 149: # All terminals available via #defines should be listed below
! 150: # Some terminals can be en/disabled in the configuration at the
! 151: # beginning of this Makefile.os2 but others may still require
! 152: # changes in term.h
! 153:
! 154: #
! 155: # GIF-support
! 156: ifdef GD
! 157: TERMFLAGS += -DHAVE_LIBGD
! 158: TERMLIBS += -lgd
! 159: endif
! 160: # PNG-support
! 161: ifdef PNG
! 162: TERMFLAGS += -DHAVE_LIBPNG
! 163: TERMLIBS += -lpng -lz
! 164: endif
! 165: # SVGA-/VESAkit support
! 166: ifdef VESA
! 167: TERMFLAGS += -DEMXVESA
! 168: TERMLIBS += -ljmgraph -lvesa
! 169: endif
! 170: # X11 support
! 171: ifdef X11
! 172: TERMFLAGS += -DX11
! 173: endif
! 174: # MOUSE support for PM terminal
! 175: ifdef MOUSE
! 176: TERMFLAGS += -DUSE_MOUSE
! 177: endif
! 178:
! 179: #
! 180: # Default Rules
! 181: #
! 182: .c.$(O):
! 183: $(CC) $(CFLAGS) $(TERMFLAGS) -o $*.$(O) -c $*.c
! 184: .c.obj:
! 185: $(CC2) $(CFLAGS2) -o $*.obj -c $*.c
! 186:
! 187: #
! 188: # Include dependencies valid for all platforms from makefile.all
! 189: #
! 190: include makefile.all
! 191:
! 192: #
! 193: # Pre-defined sets of targets:
! 194: #
! 195: all: runtime demo
! 196: alldocs: gnuplot.gih gnuplot.inf gnuplot.html gnuplot.info \
! 197: gnuplot.dvi gnuplot.ps
! 198: runtime: binaries infomin gnuplot.inf
! 199: infomin: gnupmdrv.hlp gnuplot.gih
! 200: demo: $(M)binary1 $(M)binary2 $(M)binary3
! 201: ifdef X11
! 202: binaries: gnuplot.exe gnupmdrv.exe gnuplot_x11.exe
! 203: else
! 204: binaries: gnuplot.exe gnupmdrv.exe
! 205: endif
! 206:
! 207: OBJS = $(COREOBJS) version.$(O)
! 208: term.$(O): $(OS2TERMS) term.h
! 209:
! 210: gnuplot.exe: $(OBJS)
! 211: $(CC) -o $@ $(OBJS) $(TERMLIBS) $(LIBS) $(LFLAGS)
! 212:
! 213: #
! 214: # Build the PM outboard driver
! 215: #
! 216: $(OS2DIR)\gnupmdrv.$(O2): $(OS2DIR)\gnupmdrv.c $(OS2DIR)\gnupmdrv.h
! 217: $(OS2DIR)\gclient.$(O2): $(OS2DIR)\gclient.c $(OS2DIR)\gnupmdrv.h
! 218: $(OS2DIR)\dialogs.$(O2): $(OS2DIR)\dialogs.c $(OS2DIR)\gnupmdrv.h $(OS2DIR)\dialogs.h
! 219: $(OS2DIR)\print.$(O2): $(OS2DIR)\print.c $(OS2DIR)\gnupmdrv.h
! 220: $(OS2DIR)\gnupmdrv.res : $(OS2DIR)\gnupmdrv.rc $(OS2DIR)\gnuplot.ico $(OS2DIR)\dialogs.h
! 221: cd $(OS2DIR) & rc -r gnupmdrv.rc & cd ..
! 222: OS2OBJ = $(OS2DIR)\gnupmdrv.$(O2) $(OS2DIR)\gclient.$(O2) $(OS2DIR)\print.$(O2) \
! 223: $(OS2DIR)\dialogs.$(O2)
! 224: gnupmdrv.exe: $(OS2OBJ) $(OS2DIR)\gnupmdrv.res $(OS2DIR)\gnupmdrv.def
! 225: $(CC2) $(LFLAGS2) -o $@ $(OS2OBJ) $(OS2DIR)\gnupmdrv.res $(OS2DIR)\gnupmdrv.def
! 226: gnupmdrv.hlp: $(OS2DIR)\gnupmdrv.ipf
! 227: ipfc $(OS2DIR)\gnupmdrv.ipf
! 228: move $(OS2DIR)\gnupmdrv.hlp .
! 229:
! 230: #
! 231: # Build the X11 outboard driver
! 232: #
! 233:
! 234: # X11 libraries
! 235: X11LIBS = -lX11 -lsocket -Zcrtdll
! 236: # X11 includes
! 237: X11INCLUDES = -I$(X11ROOT)/xfree86/include
! 238: X11FLAGS= -D__ST_MT_ERRNO -Zmtd -Zsysv-signals
! 239:
! 240: gnuplot_x11.exe: gplt_x11.o stdfn.o
! 241: $(CC) $(LFLAGS) $(X11FLAGS) $(EMXSPECIFIC) -o $@ $^ $(X11LIBS)
! 242:
! 243: gplt_x11.o: gplt_x11.c
! 244: $(CC) $(CFLAGS) $(X11FLAGS) $(EMXSPECIFIC) $(X11INCLUDES) -c -o $@ $<
! 245:
! 246: #
! 247: # Create documentation in various formats
! 248: #
! 249: # Change the call to LaTeX if the "latex2e" is not appropiate for you
! 250: # (and don't care about the strange way it's implemented ...)
! 251: gnuplot.dvi: gnuplot.tex
! 252: copy gnuplot.tex $(DOCDIR)\gnuplot_2.tex
! 253: cd $(DOCDIR) & latex2e gnuplot_2.tex
! 254: move $(DOCDIR)\gnuplot_2.dvi gnuplot.dvi
! 255: del $(DOCDIR)\gnuplot_2*
! 256: gnuplot.tex: $(DOCDIR)\gnuplot.doc doc2tex.exe
! 257: doc2tex $(DOCDIR)\gnuplot.doc gnuplot.tex
! 258: gnuplot.ps: gnuplot.dvi
! 259: dvips -o gnuplot.ps gnuplot.dvi
! 260: gnuplot.inf: $(DOCDIR)\gnuplot.ipf
! 261: ipfc -i $(DOCDIR)\gnuplot.ipf gnuplot.inf
! 262: gnuplot.gih: $(DOCDIR)\gnuplot.doc doc2gih.exe
! 263: doc2gih $(DOCDIR)\gnuplot.doc gnuplot.gih
! 264: gnuplot.html: $(DOCDIR)\gnuplot.doc doc2html.exe
! 265: doc2html $(DOCDIR)\gnuplot.doc gnuplot.html
! 266: gnuplot.info: $(DOCDIR)\gnuplot.doc doc2info.exe
! 267: doc2info <$(DOCDIR)\gnuplot.doc >gnuplot.info
! 268: gnuplot.texi: $(DOCDIR)\gnuplot.doc $(DOCDIR)\doc2texi.pl
! 269: perl $(DOCDIR)\doc2texi.pl $(DOCDIR)\gnuplot.doc >$(DOCDIR)\gnuplot.texi
! 270: gnuplot.rtf: $(DOCDIR)\gnuplot.doc doc2rtf.exe
! 271: doc2rtf $(DOCDIR)\gnuplot.doc gnuplot.rtf
! 272: gnuplot.ms: $(DOCDIR)\gnuplot.doc doc2ms.exe
! 273: doc2ms $(DOCDIR)\gnuplot.doc gnuplot.ms
! 274: $(DOCDIR)\gnuplot.ipf: $(DOCDIR)\gnuplot.doc doc2ipf.exe
! 275: doc2ipf $(DOCDIR)\gnuplot.doc $(DOCDIR)\gnuplot.ipf
! 276: #
! 277: # Tools for converting the documentation from docs\gnuplot.doc
! 278: # in various formats
! 279: #
! 280: doc2gih.exe doc2ipf.exe doc2html.exe doc2info.exe doc2tex.exe doc2rtf.exe: \
! 281: $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c $(DOCDIR)\allterm.h
! 282: #
! 283: # To include all terminal documentations in the documentation
! 284: # uncomment the following 2 lines
! 285: # doc2gih.exe doc2ipf.exe doc2html.exe doc2info.exe doc2tex.exe doc2rtf.exe: \
! 286: # $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c $(DOCDIR)\allterm.h
! 287:
! 288: $(DOCDIR)\allterm.h: $(CORETERM)
! 289: # echo > $@
! 290: cd $(TERMDIR) & type *.trm > ..\$@
! 291: doc2gih.exe: $(DOCDIR)\doc2gih.c $(DOCDIR)\termdoc.c $(OS2TERMS)
! 292: $(CC3) $(CFLAGS3) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2gih.c $(DOCDIR)\termdoc.c
! 293: doc2ipf.exe: $(DOCDIR)\doc2ipf.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c $(OS2TERMS)
! 294: $(CC3) $(CFLAGS3) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2ipf.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c
! 295: doc2tex.exe: $(DOCDIR)\doc2tex.c $(DOCDIR)\termdoc.c $(OS2TERMS) $(DOCDIR)\allterm.h
! 296: $(CC3) $(CFLAGS3) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2tex.c $(DOCDIR)\termdoc.c
! 297: doc2html.exe: $(DOCDIR)\doc2html.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c $(OS2TERMS)
! 298: $(CC3) $(CFLAGS3) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2html.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c
! 299: doc2info.exe: $(DOCDIR)\doc2info.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c $(OS2TERMS)
! 300: $(CC3) $(CFLAGS3) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2info.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c
! 301: doc2rtf.exe: $(DOCDIR)\doc2rtf.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c $(OS2TERMS)
! 302: $(CC3) $(CFLAGS3) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2rtf.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c
! 303: doc2ms.exe: $(DOCDIR)\doc2ms.c $(DOCDIR)\termdoc.c $(OS2TERMS)
! 304: $(CC3) $(CFLAGS3) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2ms.c $(DOCDIR)\termdoc.c
! 305: #
! 306: # Create binary demo files
! 307: #
! 308: $(M)binary1: $(M)bf_test.exe
! 309: cd $(DEMODIR) & bf_test.exe & cd ..
! 310: $(M)binary2: $(M)bf_test.exe
! 311: cd $(DEMODIR) & bf_test.exe & cd ..
! 312: $(M)binary3: $(M)bf_test.exe
! 313: cd $(DEMODIR) & bf_test.exe & cd ..
! 314: $(M)bf_test.exe : bf_test.c binary.$(O) alloc.$(O)
! 315: $(CC3) $(CFLAGS3) -o $@ bf_test.c binary.$(O) alloc.$(O)
! 316: #
! 317: # Clean up
! 318: #
! 319:
! 320: # Clean up all files temporary used
! 321: clean:
! 322: IF EXIST *.$(O) DEL *.$(O)
! 323: IF EXIST *.$(O2) DEL *.$(O2)
! 324: cd $(OS2DIR) & IF EXIST *.$(O2) DEL *.$(O2)
! 325: IF EXIST $(OS2DIR)\gnupmdrv.res DEL $(OS2DIR)\gnupmdrv.res
! 326: IF EXIST demo\bf_test.exe DEL demo\bf_test.exe
! 327: IF EXIST doc2*.exe DEL doc2*.exe
! 328: IF EXIST gnuplot.ipf DEL gnuplot.ipf
! 329: IF EXIST core DEL core
! 330: IF EXIST $(DOCDIR)\allterm.h DEL $(DOCDIR)\allterm.h
! 331:
! 332: # Clean up ALL files that were not part of the source distribution
! 333: veryclean: clean
! 334: IF EXIST *.exe.exe DEL gnuplot.exe
! 335: IF EXIST gnupmdrv.hlp DEL gnupmdrv.hlp
! 336: IF EXIST gnuplot.gih DEL gnuplot.gih
! 337: IF EXIST gnuplot.inf DEL gnuplot.inf
! 338: IF EXIST gnuplot.dvi DEL gnuplot.dvi
! 339: IF EXIST gnuplot.htm DEL gnuplot.htm
! 340: IF EXIST gnuplot.tex DEL gnuplot.tex
! 341: IF EXIST gnuplot.texi DEL gnuplot.texi
! 342: IF EXIST gnuplot.info DEL gnuplot.info
! 343: IF EXIST gnuplot.ms DEL gnuplot.ms
! 344: IF EXIST gnuplot.rtf DEL gnuplot.rtf
! 345: IF EXIST gnuplot.ps DEL gnuplot.ps
! 346: cd demo & IF EXIST binary? DEL binary?
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to makefile.os2 CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM_contrib / gnuplot