Annotation of OpenXM_contrib/gnuplot/makefile.tc, Revision 1.1
1.1 ! maekawa 1: # make file for Borland C++ 3.x
! 2: # uses Borland proprietary overlay manager
! 3: # Modified from the TurboC makefile by Maurice Castro
! 4: # The compile and link includes debug flags. Take them out if you
! 5: # do not want them included (-y -v -M, /m /s /v /l)
! 6: #
! 7: # the makefile no longer depends on a linker options file.
! 8: # this file will be created as needed. (AL 07/17/92)
! 9: #
! 10: # The compiler commands lines have become too long so I
! 11: # modified the make file to use an options file to store $(CFLAGS)
! 12: # (ALM 08/08/94)
! 13: #
! 14: # You will probably also need to edit term.h to not include some of the
! 15: # terminal types which you are not going to use, otherwise you will get a
! 16: # message about too much global data defined in term.c.
! 17: #
! 18:
! 19: # where to place gnuplot.gih helpfile
! 20: HELPFILE = gnuplot.gih
! 21: # location of Turbo C compiler
! 22: TC = c:\bc
! 23: #TC = c:\tc
! 24: # name of C compiler
! 25: CC = bcc
! 26: #CC = tcc
! 27: # location of TLINK.EXE and TCC.EXE or BCC.EXE
! 28: BIN = $(TC)\bin\\
! 29: #BIN =
! 30: # location of BGI files,
! 31: # change this line if not in TC directory, i.e. $(TC)\bgi
! 32: BGI = $(TC)\bgi
! 33: # location of bgiobj.exe tool - convertion of BGI to a linkable OBJ file.
! 34: BGIOBJ = $(TC)\bgi\bgiobj
! 35: #BGIOBJ =
! 36: # location of the system libraries
! 37: LIB = $(TC)\lib\\
! 38: # Super VGA support: name and location of the SuperVGA driver
! 39: SVGA_BGI = c:\bc\bgi\svga256.bgi
! 40: # the memory model to use (l = large code, large data; h = huge)
! 41: MODEL = l
! 42:
! 43: # -c means don't link, -f means emulate 8087 if not present
! 44: # -m? says which model to use
! 45: # -M means produce link map
! 46: # -y means include line numbers for debugger
! 47: # -v means include debug info
! 48: # -w- means ignore warnings and do not report them
! 49: # -DREADLINE to use the history/line editing capability. If you want this
! 50: # capability add -DREADLINE to CFLAGS
! 51: # -DLITE means no hiddenline removal to conserve memory
! 52: # -Z -2 -3 -G -O are optimization flags (-2 produces 286 only code)
! 53: #CFLAGS1 = -Ff=256 -c -f -m$(MODEL) -w- -Z -2 -G -O -n.
! 54: # HBB: specialise on '386 or higher, and take '-c' out, so
! 55: # the flags can be used for doc2xxx and bf_test as well:
! 56: CFLAGS1 = -Ff=256 -f -m$(MODEL) -w- -Z -3 -f287 -d -G -n. -v -y
! 57: #CFLAGS2 = -I$(TC)\include -DLITE -DMSDOS -DPC -DREADLINE -DHAVE_STRNICMP
! 58: # HBB: try without -DLITE, to activate hidden-lining (for trying)
! 59: # and #define ANSI_C!
! 60: CFLAGS2 = -I$(TC)\include -DMSDOS=1 -DPC -DANSI_C -DREADLINE=1 -DHAVE_GETCWD -DHAVE_STRNICMP
! 61: CFLAGS3 = -DHAVE_SLEEP -DEXTERN_ERRNO -DHAVE_STRING_H -DHAVE_VALUES_H
! 62:
! 63: # separate set of FLAGS (both CFLAGS and LDFLAGS for the doc2xxx tools:
! 64: DOC2XXX_FLAGS = -Idocs -Iterm @cflags.tc -ml -L$(TC)\lib
! 65:
! 66: TERMFLAGS =
! 67:
! 68: # With Overlay Support
! 69: OVLY1 = -Y
! 70: OVLY2 = -Yo
! 71: OVERLIB = $(LIB)overlay
! 72: SLASHO = /o
! 73: ODASH = /o-
! 74: # Without Overlay Support
! 75: #OVLY1 =
! 76: #OVLY2 =
! 77: #OVERLIB =
! 78: #SLASHO =
! 79: #ODASH =
! 80:
! 81: OBJ1 = bitmap.obj command.obj contour.obj eval.obj graphics.obj graph3d.obj
! 82: OBJ2 = help.obj internal.obj misc.obj parse.obj plot.obj plot2d.obj \
! 83: plot3d.obj readline.obj
! 84: OBJ3 = scanner.obj set.obj show.obj specfun.obj standard.obj stdfn.obj \
! 85: term.obj time.obj util.obj
! 86: OBJ4 = version.obj binary.obj interpol.obj fit.obj matrix.obj
! 87: OBJ5 = datafile.obj alloc.obj hidden3d.obj util3d.obj
! 88:
! 89: # uncomment svgaf.obj if you wish to include Super VGA support
! 90: OBJBGI= cgaf.obj egavgaf.obj hercf.obj attf.obj pc3270f.obj svgaf.obj
! 91:
! 92: OBJS = $(OBJ1) $(OBJ2) $(OBJ3) $(OBJ4) $(OBJ5) $(OBJBGI)
! 93:
! 94: CSOURCE5 = term\aed.trm term\cgi.trm term\dumb.trm term\dxy.trm \
! 95: term\eepic.trm term\epson.trm term\fig.trm term\hp26.trm \
! 96: term\hp2648.trm term\hpgl.trm term\hpljii.trm
! 97: CSOURCE6 = term\impcodes.h term\imagen.trm term\object.h \
! 98: term\iris4d.trm term\kyo.trm term\latex.trm term\pc.trm
! 99: CSOURCE7 = term\post.trm term\qms.trm term\regis.trm term\sun.trm \
! 100: term\t410x.trm term\tek.trm term\unixpc.trm term\unixplot.trm \
! 101: term\v384.trm term\x11.trm
! 102: CSOURCE8 = contour.c specfun.c binary.c interpol.c
! 103:
! 104: all: cflags.tc gnuplot.exe $(HELPFILE) demo\bf_test.exe
! 105:
! 106: # use linkopt.tc and cflags.tc to avoid command-line overflow
! 107:
! 108: gnuplot.exe: $(OBJS) linkopt.tc cflags.tc
! 109: # With or without debug information (select one)
! 110: $(BIN)tlink /m /s /v /l @linkopt.tc
! 111: # $(BIN)tlink @linkopt.tc
! 112:
! 113: # create linker options file
! 114: # note that when you change the model or switch overlaying,
! 115: # you will have to execute 'make clean'
! 116:
! 117: linkopt.tc: makefile.tc
! 118: echo >linkopt.tc $(LIB)C0$(MODEL) +
! 119: echo >>linkopt.tc $(SLASHO) $(OBJ1) +
! 120: echo >>linkopt.tc $(OBJ2) +
! 121: echo >>linkopt.tc $(OBJ3) +
! 122: echo >>linkopt.tc $(OBJ4) +
! 123: echo >>linkopt.tc $(OBJ5) +
! 124: echo >>linkopt.tc $(ODASH) $(OBJBGI) +
! 125: echo >>linkopt.tc ,gnuplot,gnuplot, +
! 126: echo >>linkopt.tc $(OVERLIB) +
! 127: echo >>linkopt.tc $(LIB)emu +
! 128: echo >>linkopt.tc $(LIB)math$(MODEL) +
! 129: echo >>linkopt.tc $(LIB)c$(MODEL) +
! 130: echo >>linkopt.tc $(LIB)graphics
! 131: # echo >>linkopt.tc -----
! 132: # echo >>linkopt.tc this file is generated automatically. don't change it, change the makefile.
! 133:
! 134: # Create an options file for the C flags to avoid command line overflow
! 135: # (the only way I could think of to make sure this file was up to date
! 136: # and present when needed was to make all object files dependant upon
! 137: # it - ugly) <- this may cause error, do make clean instead.
! 138: cflags.tc: makefile.tc
! 139: echo >cflags.tc $(CFLAGS1)
! 140: echo >>cflags.tc $(CFLAGS2)
! 141: echo >>cflags.tc $(CFLAGS3)
! 142:
! 143:
! 144:
! 145: # default rules
! 146:
! 147: .c.obj:
! 148: $(BIN)$(CC) -c $(OVLY2) @cflags.tc $<
! 149:
! 150: # The default for files is to be compiled for overlaying if OVLY1 and
! 151: # OVLY2 are defined. plot.c and parse.c are not suitable for overlaying.
! 152:
! 153: bitmap.obj: bitmap.c bitmap.h plot.h
! 154:
! 155: command.obj: command.c plot.h setshow.h help.h fit.h
! 156: $(BIN)$(CC) -c $(OVLY2) @cflags.tc -DHELPFILE=\"$(HELPFILE)\" command.c
! 157:
! 158: contour.obj: contour.c plot.h
! 159:
! 160: eval.obj: eval.c plot.h
! 161:
! 162: graphics.obj: graphics.c plot.h setshow.h
! 163:
! 164: graph3d.obj: graph3d.c plot.h setshow.h
! 165:
! 166: hidden3d.obj: hidden3d.c plot.h setshow.h
! 167:
! 168: util3d.obj: util3d.c plot.h setshow.h
! 169:
! 170: fit.obj: fit.c fit.h matrix.h plot.h
! 171:
! 172: matrix.obj: matrix.c matrix.h fit.h
! 173:
! 174: help.obj: help.c plot.h help.h
! 175:
! 176: internal.obj: internal.c plot.h
! 177:
! 178: misc.obj: misc.c plot.h setshow.h help.h
! 179:
! 180: parse.obj: parse.c plot.h
! 181: $(BIN)$(CC) -c $(OVLY1) @cflags.tc parse.c
! 182:
! 183: plot.obj: plot.c plot.h setshow.h
! 184: $(BIN)$(CC) -c $(OVLY1) @cflags.tc plot.c
! 185:
! 186: readline.obj: readline.c
! 187:
! 188: scanner.obj: scanner.c plot.h
! 189:
! 190: set.obj: set.c plot.h setshow.h
! 191:
! 192: show.obj: show.c plot.h setshow.h
! 193: $(BIN)$(CC) -c $(OVLY2) @cflags.tc -DHELPFILE="$(HELPFILE)" show.c
! 194:
! 195: specfun.obj: specfun.c
! 196:
! 197: standard.obj: standard.c plot.h
! 198:
! 199: stdfn.obj: stdfn.c stdfn.h
! 200:
! 201: interpol.obj: interpol.c plot.h setshow.h
! 202:
! 203: # the CSOURCE? dependencies are not up to date (but who cares)
! 204: term.obj: term.c term.h plot.h set.c show.c bitmap.h $(CSOURCE5) $(CSOURCE6) $(CSOURCE7)
! 205: $(BIN)$(CC) -c $(OVLY2) @cflags.tc $(TERMFLAGS) -DDEFAULTTERM="dospc" -Iterm -I. term.c
! 206:
! 207: util.obj: util.c plot.h
! 208:
! 209: version.obj: version.c
! 210:
! 211: # convert gnuplot.doc to gnuplot.gih
! 212: $(HELPFILE): doc2gih.exe docs\gnuplot.doc
! 213: doc2gih docs\gnuplot.doc $(HELPFILE)
! 214:
! 215: doc2gih.exe: docs\doc2gih.c docs\termdoc.c
! 216: $(BIN)$(CC) $(DOC2XXX_FLAGS) -edoc2gih.exe docs\doc2gih.c docs\termdoc.c
! 217:
! 218: doc2tex.exe: docs\doc2tex.c
! 219: $(BIN)$(CC) $(DOC2XXX_FLAGS) -DALL_TERM_DOC docs\doc2tex.c
! 220:
! 221: demo\bf_test.exe: bf_test.c binary.obj alloc.obj
! 222: $(BIN)$(CC) -edemo\bf_test.exe @cflags.tc -L$(TC)\lib bf_test.c binary.obj alloc.obj
! 223: cd demo
! 224: bf_test
! 225: cd ..
! 226:
! 227: # convert Borland Graphics Interface files to object for linking
! 228: cgaf.obj: $(BGI)\cga.bgi
! 229: $(BGIOBJ) /F $(BGI)\cga
! 230:
! 231: egavgaf.obj: $(BGI)\egavga.bgi
! 232: $(BGIOBJ) /F $(BGI)\egavga
! 233:
! 234: hercf.obj: $(BGI)\herc.bgi
! 235: $(BGIOBJ) /F $(BGI)\herc
! 236:
! 237: attf.obj: $(BGI)\att.bgi
! 238: $(BGIOBJ) /F $(BGI)\att
! 239:
! 240: pc3270f.obj: $(BGI)\pc3270.bgi
! 241: $(BGIOBJ) /F $(BGI)\pc3270
! 242:
! 243: svgaf.obj: $(SVGA_BGI)
! 244: $(BGIOBJ) /F $(SVGA_BGI) svgaf.obj _SVGA_driver_far SVGA_TEXT
! 245:
! 246: # $(OBJS): cflags.tc # this causes error message
! 247:
! 248: # clean target - remove all temp files, but leave executable intact
! 249: # needed when changing configuration (model or overlaying)
! 250:
! 251: clean:
! 252: del *.obj
! 253: del gnuplot.map
! 254: del linkopt.tc
! 255: del doc2gih.exe
! 256: del cflags.tc
! 257:
! 258: # realclean target - remove all files created by the makefile
! 259:
! 260: realclean: clean
! 261: del gnuplot.exe
! 262: del gnuplot.gih
! 263: del demo\soundfit.par
! 264: del demo\fit.log
! 265: del demo\bf_test.exe
! 266: del demo\bf_test.map
! 267: del demo\binary1
! 268: del demo\binary2
! 269: del demo\binary3
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to makefile.tc CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM_contrib / gnuplot