Annotation of OpenXM_contrib/gnuplot/makefile.tc, Revision 1.1.1.1
1.1 maekawa 1: # make file for Borland C++ 3.x
2: # uses Borland proprietary overlay manager
3: # Modified from the TurboC makefile by Maurice Castro
4: # The compile and link includes debug flags. Take them out if you
5: # do not want them included (-y -v -M, /m /s /v /l)
6: #
7: # the makefile no longer depends on a linker options file.
8: # this file will be created as needed. (AL 07/17/92)
9: #
10: # The compiler commands lines have become too long so I
11: # modified the make file to use an options file to store $(CFLAGS)
12: # (ALM 08/08/94)
13: #
14: # You will probably also need to edit term.h to not include some of the
15: # terminal types which you are not going to use, otherwise you will get a
16: # message about too much global data defined in term.c.
17: #
18:
19: # where to place gnuplot.gih helpfile
20: HELPFILE = gnuplot.gih
21: # location of Turbo C compiler
22: TC = c:\bc
23: #TC = c:\tc
24: # name of C compiler
25: CC = bcc
26: #CC = tcc
27: # location of TLINK.EXE and TCC.EXE or BCC.EXE
28: BIN = $(TC)\bin\\
29: #BIN =
30: # location of BGI files,
31: # change this line if not in TC directory, i.e. $(TC)\bgi
32: BGI = $(TC)\bgi
33: # location of bgiobj.exe tool - convertion of BGI to a linkable OBJ file.
34: BGIOBJ = $(TC)\bgi\bgiobj
35: #BGIOBJ =
36: # location of the system libraries
37: LIB = $(TC)\lib\\
38: # Super VGA support: name and location of the SuperVGA driver
39: SVGA_BGI = c:\bc\bgi\svga256.bgi
40: # the memory model to use (l = large code, large data; h = huge)
41: MODEL = l
42:
43: # -c means don't link, -f means emulate 8087 if not present
44: # -m? says which model to use
45: # -M means produce link map
46: # -y means include line numbers for debugger
47: # -v means include debug info
48: # -w- means ignore warnings and do not report them
49: # -DREADLINE to use the history/line editing capability. If you want this
50: # capability add -DREADLINE to CFLAGS
51: # -DLITE means no hiddenline removal to conserve memory
52: # -Z -2 -3 -G -O are optimization flags (-2 produces 286 only code)
53: #CFLAGS1 = -Ff=256 -c -f -m$(MODEL) -w- -Z -2 -G -O -n.
54: # HBB: specialise on '386 or higher, and take '-c' out, so
55: # the flags can be used for doc2xxx and bf_test as well:
56: CFLAGS1 = -Ff=256 -f -m$(MODEL) -w- -Z -3 -f287 -d -G -n. -v -y
57: #CFLAGS2 = -I$(TC)\include -DLITE -DMSDOS -DPC -DREADLINE -DHAVE_STRNICMP
58: # HBB: try without -DLITE, to activate hidden-lining (for trying)
59: # and #define ANSI_C!
60: CFLAGS2 = -I$(TC)\include -DMSDOS=1 -DPC -DANSI_C -DREADLINE=1 -DHAVE_GETCWD -DHAVE_STRNICMP
61: CFLAGS3 = -DHAVE_SLEEP -DEXTERN_ERRNO -DHAVE_STRING_H -DHAVE_VALUES_H
62:
63: # separate set of FLAGS (both CFLAGS and LDFLAGS for the doc2xxx tools:
64: DOC2XXX_FLAGS = -Idocs -Iterm @cflags.tc -ml -L$(TC)\lib
65:
66: TERMFLAGS =
67:
68: # With Overlay Support
69: OVLY1 = -Y
70: OVLY2 = -Yo
71: OVERLIB = $(LIB)overlay
72: SLASHO = /o
73: ODASH = /o-
74: # Without Overlay Support
75: #OVLY1 =
76: #OVLY2 =
77: #OVERLIB =
78: #SLASHO =
79: #ODASH =
80:
81: OBJ1 = bitmap.obj command.obj contour.obj eval.obj graphics.obj graph3d.obj
82: OBJ2 = help.obj internal.obj misc.obj parse.obj plot.obj plot2d.obj \
83: plot3d.obj readline.obj
84: OBJ3 = scanner.obj set.obj show.obj specfun.obj standard.obj stdfn.obj \
85: term.obj time.obj util.obj
86: OBJ4 = version.obj binary.obj interpol.obj fit.obj matrix.obj
87: OBJ5 = datafile.obj alloc.obj hidden3d.obj util3d.obj
88:
89: # uncomment svgaf.obj if you wish to include Super VGA support
90: OBJBGI= cgaf.obj egavgaf.obj hercf.obj attf.obj pc3270f.obj svgaf.obj
91:
92: OBJS = $(OBJ1) $(OBJ2) $(OBJ3) $(OBJ4) $(OBJ5) $(OBJBGI)
93:
94: CSOURCE5 = term\aed.trm term\cgi.trm term\dumb.trm term\dxy.trm \
95: term\eepic.trm term\epson.trm term\fig.trm term\hp26.trm \
96: term\hp2648.trm term\hpgl.trm term\hpljii.trm
97: CSOURCE6 = term\impcodes.h term\imagen.trm term\object.h \
98: term\iris4d.trm term\kyo.trm term\latex.trm term\pc.trm
99: CSOURCE7 = term\post.trm term\qms.trm term\regis.trm term\sun.trm \
100: term\t410x.trm term\tek.trm term\unixpc.trm term\unixplot.trm \
101: term\v384.trm term\x11.trm
102: CSOURCE8 = contour.c specfun.c binary.c interpol.c
103:
104: all: cflags.tc gnuplot.exe $(HELPFILE) demo\bf_test.exe
105:
106: # use linkopt.tc and cflags.tc to avoid command-line overflow
107:
108: gnuplot.exe: $(OBJS) linkopt.tc cflags.tc
109: # With or without debug information (select one)
110: $(BIN)tlink /m /s /v /l @linkopt.tc
111: # $(BIN)tlink @linkopt.tc
112:
113: # create linker options file
114: # note that when you change the model or switch overlaying,
115: # you will have to execute 'make clean'
116:
117: linkopt.tc: makefile.tc
118: echo >linkopt.tc $(LIB)C0$(MODEL) +
119: echo >>linkopt.tc $(SLASHO) $(OBJ1) +
120: echo >>linkopt.tc $(OBJ2) +
121: echo >>linkopt.tc $(OBJ3) +
122: echo >>linkopt.tc $(OBJ4) +
123: echo >>linkopt.tc $(OBJ5) +
124: echo >>linkopt.tc $(ODASH) $(OBJBGI) +
125: echo >>linkopt.tc ,gnuplot,gnuplot, +
126: echo >>linkopt.tc $(OVERLIB) +
127: echo >>linkopt.tc $(LIB)emu +
128: echo >>linkopt.tc $(LIB)math$(MODEL) +
129: echo >>linkopt.tc $(LIB)c$(MODEL) +
130: echo >>linkopt.tc $(LIB)graphics
131: # echo >>linkopt.tc -----
132: # echo >>linkopt.tc this file is generated automatically. don't change it, change the makefile.
133:
134: # Create an options file for the C flags to avoid command line overflow
135: # (the only way I could think of to make sure this file was up to date
136: # and present when needed was to make all object files dependant upon
137: # it - ugly) <- this may cause error, do make clean instead.
138: cflags.tc: makefile.tc
139: echo >cflags.tc $(CFLAGS1)
140: echo >>cflags.tc $(CFLAGS2)
141: echo >>cflags.tc $(CFLAGS3)
142:
143:
144:
145: # default rules
146:
147: .c.obj:
148: $(BIN)$(CC) -c $(OVLY2) @cflags.tc $<
149:
150: # The default for files is to be compiled for overlaying if OVLY1 and
151: # OVLY2 are defined. plot.c and parse.c are not suitable for overlaying.
152:
153: bitmap.obj: bitmap.c bitmap.h plot.h
154:
155: command.obj: command.c plot.h setshow.h help.h fit.h
156: $(BIN)$(CC) -c $(OVLY2) @cflags.tc -DHELPFILE=\"$(HELPFILE)\" command.c
157:
158: contour.obj: contour.c plot.h
159:
160: eval.obj: eval.c plot.h
161:
162: graphics.obj: graphics.c plot.h setshow.h
163:
164: graph3d.obj: graph3d.c plot.h setshow.h
165:
166: hidden3d.obj: hidden3d.c plot.h setshow.h
167:
168: util3d.obj: util3d.c plot.h setshow.h
169:
170: fit.obj: fit.c fit.h matrix.h plot.h
171:
172: matrix.obj: matrix.c matrix.h fit.h
173:
174: help.obj: help.c plot.h help.h
175:
176: internal.obj: internal.c plot.h
177:
178: misc.obj: misc.c plot.h setshow.h help.h
179:
180: parse.obj: parse.c plot.h
181: $(BIN)$(CC) -c $(OVLY1) @cflags.tc parse.c
182:
183: plot.obj: plot.c plot.h setshow.h
184: $(BIN)$(CC) -c $(OVLY1) @cflags.tc plot.c
185:
186: readline.obj: readline.c
187:
188: scanner.obj: scanner.c plot.h
189:
190: set.obj: set.c plot.h setshow.h
191:
192: show.obj: show.c plot.h setshow.h
193: $(BIN)$(CC) -c $(OVLY2) @cflags.tc -DHELPFILE="$(HELPFILE)" show.c
194:
195: specfun.obj: specfun.c
196:
197: standard.obj: standard.c plot.h
198:
199: stdfn.obj: stdfn.c stdfn.h
200:
201: interpol.obj: interpol.c plot.h setshow.h
202:
203: # the CSOURCE? dependencies are not up to date (but who cares)
204: term.obj: term.c term.h plot.h set.c show.c bitmap.h $(CSOURCE5) $(CSOURCE6) $(CSOURCE7)
205: $(BIN)$(CC) -c $(OVLY2) @cflags.tc $(TERMFLAGS) -DDEFAULTTERM="dospc" -Iterm -I. term.c
206:
207: util.obj: util.c plot.h
208:
209: version.obj: version.c
210:
211: # convert gnuplot.doc to gnuplot.gih
212: $(HELPFILE): doc2gih.exe docs\gnuplot.doc
213: doc2gih docs\gnuplot.doc $(HELPFILE)
214:
215: doc2gih.exe: docs\doc2gih.c docs\termdoc.c
216: $(BIN)$(CC) $(DOC2XXX_FLAGS) -edoc2gih.exe docs\doc2gih.c docs\termdoc.c
217:
218: doc2tex.exe: docs\doc2tex.c
219: $(BIN)$(CC) $(DOC2XXX_FLAGS) -DALL_TERM_DOC docs\doc2tex.c
220:
221: demo\bf_test.exe: bf_test.c binary.obj alloc.obj
222: $(BIN)$(CC) -edemo\bf_test.exe @cflags.tc -L$(TC)\lib bf_test.c binary.obj alloc.obj
223: cd demo
224: bf_test
225: cd ..
226:
227: # convert Borland Graphics Interface files to object for linking
228: cgaf.obj: $(BGI)\cga.bgi
229: $(BGIOBJ) /F $(BGI)\cga
230:
231: egavgaf.obj: $(BGI)\egavga.bgi
232: $(BGIOBJ) /F $(BGI)\egavga
233:
234: hercf.obj: $(BGI)\herc.bgi
235: $(BGIOBJ) /F $(BGI)\herc
236:
237: attf.obj: $(BGI)\att.bgi
238: $(BGIOBJ) /F $(BGI)\att
239:
240: pc3270f.obj: $(BGI)\pc3270.bgi
241: $(BGIOBJ) /F $(BGI)\pc3270
242:
243: svgaf.obj: $(SVGA_BGI)
244: $(BGIOBJ) /F $(SVGA_BGI) svgaf.obj _SVGA_driver_far SVGA_TEXT
245:
246: # $(OBJS): cflags.tc # this causes error message
247:
248: # clean target - remove all temp files, but leave executable intact
249: # needed when changing configuration (model or overlaying)
250:
251: clean:
252: del *.obj
253: del gnuplot.map
254: del linkopt.tc
255: del doc2gih.exe
256: del cflags.tc
257:
258: # realclean target - remove all files created by the makefile
259:
260: realclean: clean
261: del gnuplot.exe
262: del gnuplot.gih
263: del demo\soundfit.par
264: del demo\fit.log
265: del demo\bf_test.exe
266: del demo\bf_test.map
267: del demo\binary1
268: del demo\binary2
269: del demo\binary3
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to makefile.tc CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM_contrib / gnuplot