File: [local] / OpenXM_contrib / gnuplot / Attic / makefile.tc (download)
Revision 1.1.1.1 (vendor branch), Sun Jan 9 17:00:53 2000 UTC (24 years, 8 months ago) by maekawa
Branch: GNUPLOT
CVS Tags: maekawa-ipv6, VERSION_3_7_1, VERSION_3_7, RELEASE_20000124, RELEASE_1_2_2, RELEASE_1_2_1, RELEASE_1_1_3, RELEASE_1_1_2 Changes since 1.1: +0 -0
lines
Import gnuplot 3.7
|
# make file for Borland C++ 3.x
# uses Borland proprietary overlay manager
# Modified from the TurboC makefile by Maurice Castro
# The compile and link includes debug flags. Take them out if you
# do not want them included (-y -v -M, /m /s /v /l)
#
# the makefile no longer depends on a linker options file.
# this file will be created as needed. (AL 07/17/92)
#
# The compiler commands lines have become too long so I
# modified the make file to use an options file to store $(CFLAGS)
# (ALM 08/08/94)
#
# You will probably also need to edit term.h to not include some of the
# terminal types which you are not going to use, otherwise you will get a
# message about too much global data defined in term.c.
#
# where to place gnuplot.gih helpfile
HELPFILE = gnuplot.gih
# location of Turbo C compiler
TC = c:\bc
#TC = c:\tc
# name of C compiler
CC = bcc
#CC = tcc
# location of TLINK.EXE and TCC.EXE or BCC.EXE
BIN = $(TC)\bin\\
#BIN =
# location of BGI files,
# change this line if not in TC directory, i.e. $(TC)\bgi
BGI = $(TC)\bgi
# location of bgiobj.exe tool - convertion of BGI to a linkable OBJ file.
BGIOBJ = $(TC)\bgi\bgiobj
#BGIOBJ =
# location of the system libraries
LIB = $(TC)\lib\\
# Super VGA support: name and location of the SuperVGA driver
SVGA_BGI = c:\bc\bgi\svga256.bgi
# the memory model to use (l = large code, large data; h = huge)
MODEL = l
# -c means don't link, -f means emulate 8087 if not present
# -m? says which model to use
# -M means produce link map
# -y means include line numbers for debugger
# -v means include debug info
# -w- means ignore warnings and do not report them
# -DREADLINE to use the history/line editing capability. If you want this
# capability add -DREADLINE to CFLAGS
# -DLITE means no hiddenline removal to conserve memory
# -Z -2 -3 -G -O are optimization flags (-2 produces 286 only code)
#CFLAGS1 = -Ff=256 -c -f -m$(MODEL) -w- -Z -2 -G -O -n.
# HBB: specialise on '386 or higher, and take '-c' out, so
# the flags can be used for doc2xxx and bf_test as well:
CFLAGS1 = -Ff=256 -f -m$(MODEL) -w- -Z -3 -f287 -d -G -n. -v -y
#CFLAGS2 = -I$(TC)\include -DLITE -DMSDOS -DPC -DREADLINE -DHAVE_STRNICMP
# HBB: try without -DLITE, to activate hidden-lining (for trying)
# and #define ANSI_C!
CFLAGS2 = -I$(TC)\include -DMSDOS=1 -DPC -DANSI_C -DREADLINE=1 -DHAVE_GETCWD -DHAVE_STRNICMP
CFLAGS3 = -DHAVE_SLEEP -DEXTERN_ERRNO -DHAVE_STRING_H -DHAVE_VALUES_H
# separate set of FLAGS (both CFLAGS and LDFLAGS for the doc2xxx tools:
DOC2XXX_FLAGS = -Idocs -Iterm @cflags.tc -ml -L$(TC)\lib
TERMFLAGS =
# With Overlay Support
OVLY1 = -Y
OVLY2 = -Yo
OVERLIB = $(LIB)overlay
SLASHO = /o
ODASH = /o-
# Without Overlay Support
#OVLY1 =
#OVLY2 =
#OVERLIB =
#SLASHO =
#ODASH =
OBJ1 = bitmap.obj command.obj contour.obj eval.obj graphics.obj graph3d.obj
OBJ2 = help.obj internal.obj misc.obj parse.obj plot.obj plot2d.obj \
plot3d.obj readline.obj
OBJ3 = scanner.obj set.obj show.obj specfun.obj standard.obj stdfn.obj \
term.obj time.obj util.obj
OBJ4 = version.obj binary.obj interpol.obj fit.obj matrix.obj
OBJ5 = datafile.obj alloc.obj hidden3d.obj util3d.obj
# uncomment svgaf.obj if you wish to include Super VGA support
OBJBGI= cgaf.obj egavgaf.obj hercf.obj attf.obj pc3270f.obj svgaf.obj
OBJS = $(OBJ1) $(OBJ2) $(OBJ3) $(OBJ4) $(OBJ5) $(OBJBGI)
CSOURCE5 = term\aed.trm term\cgi.trm term\dumb.trm term\dxy.trm \
term\eepic.trm term\epson.trm term\fig.trm term\hp26.trm \
term\hp2648.trm term\hpgl.trm term\hpljii.trm
CSOURCE6 = term\impcodes.h term\imagen.trm term\object.h \
term\iris4d.trm term\kyo.trm term\latex.trm term\pc.trm
CSOURCE7 = term\post.trm term\qms.trm term\regis.trm term\sun.trm \
term\t410x.trm term\tek.trm term\unixpc.trm term\unixplot.trm \
term\v384.trm term\x11.trm
CSOURCE8 = contour.c specfun.c binary.c interpol.c
all: cflags.tc gnuplot.exe $(HELPFILE) demo\bf_test.exe
# use linkopt.tc and cflags.tc to avoid command-line overflow
gnuplot.exe: $(OBJS) linkopt.tc cflags.tc
# With or without debug information (select one)
$(BIN)tlink /m /s /v /l @linkopt.tc
# $(BIN)tlink @linkopt.tc
# create linker options file
# note that when you change the model or switch overlaying,
# you will have to execute 'make clean'
linkopt.tc: makefile.tc
echo >linkopt.tc $(LIB)C0$(MODEL) +
echo >>linkopt.tc $(SLASHO) $(OBJ1) +
echo >>linkopt.tc $(OBJ2) +
echo >>linkopt.tc $(OBJ3) +
echo >>linkopt.tc $(OBJ4) +
echo >>linkopt.tc $(OBJ5) +
echo >>linkopt.tc $(ODASH) $(OBJBGI) +
echo >>linkopt.tc ,gnuplot,gnuplot, +
echo >>linkopt.tc $(OVERLIB) +
echo >>linkopt.tc $(LIB)emu +
echo >>linkopt.tc $(LIB)math$(MODEL) +
echo >>linkopt.tc $(LIB)c$(MODEL) +
echo >>linkopt.tc $(LIB)graphics
# echo >>linkopt.tc -----
# echo >>linkopt.tc this file is generated automatically. don't change it, change the makefile.
# Create an options file for the C flags to avoid command line overflow
# (the only way I could think of to make sure this file was up to date
# and present when needed was to make all object files dependant upon
# it - ugly) <- this may cause error, do make clean instead.
cflags.tc: makefile.tc
echo >cflags.tc $(CFLAGS1)
echo >>cflags.tc $(CFLAGS2)
echo >>cflags.tc $(CFLAGS3)
# default rules
.c.obj:
$(BIN)$(CC) -c $(OVLY2) @cflags.tc $<
# The default for files is to be compiled for overlaying if OVLY1 and
# OVLY2 are defined. plot.c and parse.c are not suitable for overlaying.
bitmap.obj: bitmap.c bitmap.h plot.h
command.obj: command.c plot.h setshow.h help.h fit.h
$(BIN)$(CC) -c $(OVLY2) @cflags.tc -DHELPFILE=\"$(HELPFILE)\" command.c
contour.obj: contour.c plot.h
eval.obj: eval.c plot.h
graphics.obj: graphics.c plot.h setshow.h
graph3d.obj: graph3d.c plot.h setshow.h
hidden3d.obj: hidden3d.c plot.h setshow.h
util3d.obj: util3d.c plot.h setshow.h
fit.obj: fit.c fit.h matrix.h plot.h
matrix.obj: matrix.c matrix.h fit.h
help.obj: help.c plot.h help.h
internal.obj: internal.c plot.h
misc.obj: misc.c plot.h setshow.h help.h
parse.obj: parse.c plot.h
$(BIN)$(CC) -c $(OVLY1) @cflags.tc parse.c
plot.obj: plot.c plot.h setshow.h
$(BIN)$(CC) -c $(OVLY1) @cflags.tc plot.c
readline.obj: readline.c
scanner.obj: scanner.c plot.h
set.obj: set.c plot.h setshow.h
show.obj: show.c plot.h setshow.h
$(BIN)$(CC) -c $(OVLY2) @cflags.tc -DHELPFILE="$(HELPFILE)" show.c
specfun.obj: specfun.c
standard.obj: standard.c plot.h
stdfn.obj: stdfn.c stdfn.h
interpol.obj: interpol.c plot.h setshow.h
# the CSOURCE? dependencies are not up to date (but who cares)
term.obj: term.c term.h plot.h set.c show.c bitmap.h $(CSOURCE5) $(CSOURCE6) $(CSOURCE7)
$(BIN)$(CC) -c $(OVLY2) @cflags.tc $(TERMFLAGS) -DDEFAULTTERM="dospc" -Iterm -I. term.c
util.obj: util.c plot.h
version.obj: version.c
# convert gnuplot.doc to gnuplot.gih
$(HELPFILE): doc2gih.exe docs\gnuplot.doc
doc2gih docs\gnuplot.doc $(HELPFILE)
doc2gih.exe: docs\doc2gih.c docs\termdoc.c
$(BIN)$(CC) $(DOC2XXX_FLAGS) -edoc2gih.exe docs\doc2gih.c docs\termdoc.c
doc2tex.exe: docs\doc2tex.c
$(BIN)$(CC) $(DOC2XXX_FLAGS) -DALL_TERM_DOC docs\doc2tex.c
demo\bf_test.exe: bf_test.c binary.obj alloc.obj
$(BIN)$(CC) -edemo\bf_test.exe @cflags.tc -L$(TC)\lib bf_test.c binary.obj alloc.obj
cd demo
bf_test
cd ..
# convert Borland Graphics Interface files to object for linking
cgaf.obj: $(BGI)\cga.bgi
$(BGIOBJ) /F $(BGI)\cga
egavgaf.obj: $(BGI)\egavga.bgi
$(BGIOBJ) /F $(BGI)\egavga
hercf.obj: $(BGI)\herc.bgi
$(BGIOBJ) /F $(BGI)\herc
attf.obj: $(BGI)\att.bgi
$(BGIOBJ) /F $(BGI)\att
pc3270f.obj: $(BGI)\pc3270.bgi
$(BGIOBJ) /F $(BGI)\pc3270
svgaf.obj: $(SVGA_BGI)
$(BGIOBJ) /F $(SVGA_BGI) svgaf.obj _SVGA_driver_far SVGA_TEXT
# $(OBJS): cflags.tc # this causes error message
# clean target - remove all temp files, but leave executable intact
# needed when changing configuration (model or overlaying)
clean:
del *.obj
del gnuplot.map
del linkopt.tc
del doc2gih.exe
del cflags.tc
# realclean target - remove all files created by the makefile
realclean: clean
del gnuplot.exe
del gnuplot.gih
del demo\soundfit.par
del demo\fit.log
del demo\bf_test.exe
del demo\bf_test.map
del demo\binary1
del demo\binary2
del demo\binary3