Annotation of OpenXM_contrib/gnuplot/makefile.unx, Revision 1.1.1.1
1.1 maekawa 1: #
2: # $Id: makefile.unx,v 1.92 1998/04/14 00:15:57 drd Exp $
3: #
4: #
5: ############################################################
6: #
7: # GNUPLOT 3.0 Makefile (Unix X11 support) for
8: # Apollo/Sun/Dec5000/IBM-RS6000/HP9000/SGI/3B1/386IX/Cray
9: #
10: # Original version by:
11: # oliveria@caen.engin.umich.edu (ROQUE DONIZETE DE OLIVEIRA)
12: # Wed, 3 Jul 91 14:31:37 -0400
13: #
14: #>>> Customizing: You must customize part of this makefile for your site.
15: #>>> Then type 'make' for further instructions.
16: #>>> Customization instructions look like these lines do (#>>>).
17: #
18:
19: .NOEXPORT:
20:
21: TARGET = All# What to make by default
22:
23: ############################################################
24: #>>> Decide where the binaries and manuals will go.
25: # directory where to install executables on 'make install'
26: DEST=/usr/local/bin
27: # directory for installing man page on 'make man_install'.
28: MANDEST=/usr/local/man/man1
29: # where to install help file gnuplot.gih (note: this doesn't include gnuplot.gih)
30: HELPDEST=/usr/local/lib
31: #HELPDEST=docs
32: # Where to send email about bugs and comments (locally)
33: EMAIL=bug-gnuplot@dartmouth.edu
34:
35: ############################################################
36: #>>> Some machines may need MAKE to be defined explicitly
37: MAKE = make
38: #>>> Choose your C compiler and basic compiler flags.
39: # the C compiler
40: CC = cc
41: # -O if you trust your compiler's optimizer
42: COPTS =
43: # default loading command
44: LD = $(CC) $(CFLAGS)
45: NPROC = 2
46: # default installion command. On some systems, this doesn't exist or is
47: # incompatible. In this case just use cp. This should be handeled by the
48: # system specific make commands below. Please report systems that need this,
49: # so this can be added as default. (I think most SysV systems need this, but
50: # I'm not sure)
51: INSTALL=install
52: #INSTALL=cp
53: #
54: ############################################################
55: #>>> Choose some optional features.
56: #>>> At this point there are only two optional features:
57: # READLINE:
58: # If READLINE is defined, then command-line editing is supported.
59: # Otherwise, your normal terminal editing is all you get.
60: # Some machines will not support this, and they will turn this
61: # option off (for example, apollos running SR10.2 or SR10.3 and
62: # loaded with BSD4.3 instead of SYS5). Note: problems with
63: # gnuplot prompts have been noted when this feature is selected
64: # on IBM RS/6000 AIX, and compile errors are encountered on
65: # Sequent Dynix 3 and Convex OS 9.0. If seems to work with ConvexOS 10.1.
66: # GNU_READLINE
67: # If you want to use the more complex gnu version of readline, you can
68: # define GNU_READLINE as well as READLINE and add the appropriate library
69: # file(s) to LIBS below.
70: # NOCWDRC:
71: # If NOCWDRC is defined, then any .gnuplot in the current directory
72: # is not read on startup. This is a security consideration
73: # especially for root users ( we recommend you define -DNOCWDRC ).
74: OPTIONS = -DREADLINE -DNOCWDRC
75:
76: #>>> Optionally install the lasergnu script.
77: # Lasergnu is a handy shell script for creating a plot from the
78: # command line and sending it directly to the printer. It currently
79: # supports PostScript and imagen printers, and probably would need
80: # tailoring to your site.
81: # Use lasergnu_install to install lasergnu.
82: # Use lasergnu_noinstall to not install lasergnu (default).
83: LASERGNU = lasergnu_noinstall
84:
85: ############################################################
86: # X11 support
87: #
88:
89: #>>> List your X11 libraries
90: X11LIBS = -lX11
91:
92: #>>> List where the X11 include directory is found (if other than /usr/include)
93: X11INCLUDES =
94:
95: #>>> List additional CFLAGS for X11 compilation
96: # -DBSD_TYPES if your system defines FD_* macros for select in
97: # <sys/bsdtypes.h>
98: # -ISC22 to circumvent missing plots past the first on ISC 2.2
99: X11FLAGS =
100:
101: #>>> You shouldn't have to change these, since they are controlled by
102: #>>> Machine dependent definitions below.
103: # Compile option for plot.c and TERMFLAGS, to include X11 support
104: PLOTXFLAG = -DX11
105: # make gnuplot_x11 by default
106: GNUPLOT_X11 = gnuplot_x11
107: # install gnuplot_x11 by default
108: X11INSTALL = x11_install
109:
110: ############################################################
111: #>>> Okay, you've changed enough. Now type 'make'.
112:
113: ############################################################
114: # This is used to pass many of the above definitions to make
115: # subprocesses. Don't change this.
116: MY_FLAGS = CC="$(CC)" COPTS="$(COPTS)" DEST="$(DEST)" \
117: MANDEST="$(MANDEST)" HELPDEST="$(HELPDEST)" \
118: EMAIL="$(EMAIL)" LASERGNU="$(LASERGNU)"
119:
120: ############################################################
121: # Explanations of CFLAGS definitions.
122: # These should not need to be changed by you.
123: # They are set correctly for each machine below. If your machine
124: # doesn't fit the one of the patterns, override on the make command
125: # line or make a new target for it and a new _FLAGS definition.
126: # -DNO_MEMSET if you need to use bzero() instead of memset()
127: # -DNO_MEMCPY if your memcpy() is called bcopy()
128: # -DHAVE_COPY if you have bcopy() and no memcpy()
129: # -DHAVE_STRNICMP if you have strnicmp()
130: # -DHAVE_STRNCASECMP if you have strncasecmp() (GNU Libc, bsd)
131: # -DNO_TEMPNAM if you don't have tempnam()
132: # -DGAMMA=foo if your gamma function is called foo(). Apollos and
133: # Linux have lgamma(3m). The default is -DGAMMA=gamma.
134: # -DHAVE_GETCWD if your unix uses getcwd() instead of getwd()
135: # this is needed by HP-UX and Cray Unicos systems.
136: # -DHAVE_GETWD if you have getwd()
137: # -DULTRIX_KLUDGE if you run X windows on Ultrix and experience the
138: # "every other plot" problem.
139: # -DCRIPPLED_SELECT if "select errors" are encountered with X. This
140: # option is needed on SVR3 platforms with incomplete support for
141: # the BSD select() system call
142: # -DXPG3_LOCALE if your system uses the 'setlocale' function to
143: # support foreign charactersets (currently only ISO8859-1).
144: # -Dunix is required to explicitly define "unix" for SCO and IBM
145: # RS/6000 running AIX 3.2
146: # -DNO_STDLIB_H if you are missing the stdlib.h header (old bsd systems)
147: # -DNO_SYS_TYPES_H if you don't have sys/types.h
148: # -DNO_STRCHR if you have index instead of strchr
149: # -DNO_STRIN_H if you have strings.h instead of string.h
150: # -DHAVE_UNISTD_H if you have unistd.h
151: # -DHAVE_LIBC_H if you have libc.h (NeXT)
152: # -DNO_ERRNO_H if you don't have errno.h
153: # -fswitch if you are compiling on a Sun3 (or even -f68881)
154: # (but -fswitch is buggy on some systems, so watch out)
155: # -DRETSIGTYPE=int if the argument to signal is an int function
156: # -DSIGFUNC_NO_INT_ARG if the signal function may not have an int argument
157: # -DNO_STRERROR if your library does not have strerror()
158:
159: # Defaults in case the user types 'make All' directly
160: # Should match X11_FLAGS's CFLAGS definition
161: CFLAGS = $(COPTS) $(OPTIONS)
162:
163: ############################################################
164: # Terminal (device) support
165: #
166: # All devices available to a given machine are compiled in by default.
167: # This documents the flags available in TERMFLAGS, although TERMFLAGS
168: # is usually controlled by the machine-dependent definitions below.
169: # See other terminal defines in term.h.
170: # Define ULTRIX_KLUDGE if you have the every-other plot problem in Ultrix X11.
171: #
172: # -DAPOLLO Apollo Graphics Primitive Resource (window resize after replot)
173: # -DGPR Apollo Graphics Primitive Resource (fixed-size window)
174: # -DCGI SCO CGI
175: # -DIRIS IRIS4D series computer
176: # -DSUN Sun Microsystems Workstation
177: # -DLINUXVGA Linux PC with SuperVGA library
178: # -DUNIXPC unixpc (ATT 3b1 or ATT 7300)
179: # -DUNIXPLOT unixplot
180: # -DGNUGRAPH use GNU graphics version of UNIX plot library
181: # This can only be used in combination with -DUNIXPLOT
182: # -DX11 X11 Window System (This is $(PLOTXFLAG))
183: TERMFLAGS = -I. -Iterm $(PLOTXFLAG)
184:
185: ############################################################
186: # Library explanations.
187: # You shouldn't need to adjust this; again, it is handled by the
188: # machine-dependent definitions below.
189: #
190: # -lplot if you have -DUNIXPLOT in TERMFLAGS
191: # -lsuntool -lsunwindow -lpixrect if you have -DSUN in TERMFLAGS
192: # -lgl_s if -DIRIS4D in TERMFLAGS
193: # -lccgi if -DCGI in TERMFLAGS
194: # -lvga if -DLINUXVGA in TERMFLAGS
195: # -lmgr -lpixrect if -DMGR in TERMFLAGS. (conflicts with SunView)
196: # -lreadline (or -Lsomewhere libreadline.a) if you use the gnu version
197: # -ltermcap might be necessary after -lreadline
198: LIBS = -lm # -lplot is no longer shipped on SUNs
199:
200: ####################################################################
201: # List of object files except version.o
202: OBJS = bitmap.o command.o contour.o eval.o graphics.o graph3d.o help.o \
203: internal.o misc.o parse.o plot.o plot2d.o plot3d.o readline.o \
204: scanner.o set.o show.o specfun.o standard.o stdfn.o term.o time.o \
205: util.o binary.o interpol.o fit.o matrix.o datafile.o alloc.o \
206: util3d.o hidden3d.o
207:
208: NEXTOBJS = epsviewe.o
209: ############################################################
210: # Machine-dependent settings.
211: #
212: X11_FLAGS = \
213: CFLAGS="$(COPTS) $(OPTIONS)" \
214: LIBS="$(LIBS)" X11FLAGS="$(X11FLAGS)" X11INCLUDES="$(X11INCLUDES)" \
215: X11LIBS="$(X11LIBS)" \
216: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
217: X11INSTALL="$(X11INSTALL)" \
218: TERMFLAGS="$(TERMFLAGS)"
219:
220: DEC_OSF_FLAGS = \
221: CFLAGS="$(COPTS) $(OPTIONS) -I/usr/sys/include -I/usr/sys/BINARY -DANSI -DGAMMA=lgamma -D_XOPEN_SOURCE -DNO_MEMCPY -DNO_MEMSET" \
222: LIBS="$(LIBS) -ldnet_stub" \
223: X11FLAGS="$(X11FLAGS) -DMOTIF -D_NO_PROTO -D_OSF_SOURCE" \
224: X11INCLUDES="$(X11INCLUDES) -I/usr/include/Xm" \
225: X11LIBS="$(X11LIBS) -ldnet_stub" \
226: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
227: X11INSTALL="$(X11INSTALL)" \
228: TERMFLAGS="$(TERMFLAGS) "
229:
230: DEC_FLAGS = \
231: CFLAGS="$(COPTS) $(OPTIONS) -DNO_MEMCPY -DNO_MEMSET" \
232: LIBS="-lplot $(LIBS)" X11FLAGS="$(X11FLAGS)" \
233: X11INCLUDES="$(X11INCLUDES)" \
234: X11LIBS="$(X11LIBS)" \
235: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
236: X11INSTALL="$(X11INSTALL)" \
237: TERMFLAGS="$(TERMFLAGS) -DULTRIX_KLUDGE"
238:
239: APOLLO_FLAGS = \
240: CFLAGS="$(COPTS) $(OPTIONS) -DGAMMA=lgamma -DNO_MEMCPY -DNO_MEMSET" \
241: LIBS="$(LIBS)" X11FLAGS="$(X11FLAGS)" \
242: X11INCLUDES="$(X11INCLUDES)" \
243: X11LIBS="-L/usr/lib/X11 -lX11" \
244: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
245: X11INSTALL="$(X11INSTALL)" \
246: TERMFLAGS="$(TERMFLAGS) -DAPOLLO -DGPR"
247:
248: HP8_FLAGS = \
249: CFLAGS="$(COPTS) $(OPTIONS) -DHAVE_GETCWD -DNO_ERRNO_H" \
250: LIBS=$(LIBS) X11FLAGS="$(X11FLAGS)" \
251: X11INCLUDES="-I/usr/include/X11R4" \
252: X11LIBS="-L/usr/lib/X11R4 -lX11" \
253: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
254: X11INSTALL="$(X11INSTALL)" \
255: TERMFLAGS="-I. -Iterm -DX11"
256:
257: HP9_FLAGS = \
258: CFLAGS="$(COPTS) $(OPTIONS) -Ae -DHAVE_GETCWD -DNO_ERRNO_H" \
259: LIBS=$(LIBS) X11FLAGS="$(X11FLAGS)" \
260: X11INCLUDES="-I/usr/include/X11R5" \
261: X11LIBS="-L/usr/lib/X11R5 -lX11" \
262: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
263: X11INSTALL="$(X11INSTALL)" \
264: TERMFLAGS="-I. -Iterm -DX11" \
265: MFLAGS="CFLAGS=\"-Ae -I.. -I../term\""
266:
267: SOLARIS_X11_FLAGS = \
268: CFLAGS="$(COPTS) $(OPTIONS) -DHAVE_UNISTD_H -DHAVE_GETCWD -DHAVE_SYS_SYSTEMINFO_H -DHAVE_SYSINFO" \
269: X11FLAGS="$(X11FLAGS)" X11INCLUDES="$(X11INCLUDES)" \
270: X11LIBS="$(X11LIBS) -lsocket" \
271: X11INCLUDES="-I$$OPENWINHOME/include $(X11INCLUDES)" \
272: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
273: X11INSTALL="$(X11INSTALL)" \
274: TERMFLAGS="$(TERMFLAGS) -DHAVE_SYS_SYSTEMINFO_H -DHAVE_SYSINFO"
275:
276: SUN_FLAGS = \
277: CFLAGS="$(COPTS) $(OPTIONS) -DSUN" \
278: LIBS="-lsuntool -lsunwindow -lpixrect $(LIBS)" \
279: X11FLAGS=" " X11INCLUDES=" " \
280: X11LIBS=" " \
281: PLOTXFLAG=" " GNUPLOT_X11=" " X11INSTALL=x11_noinstall \
282: TERMFLAGS="-I. -Iterm"
283:
284: SUN_X11_FLAGS = \
285: CFLAGS="$(COPTS) $(OPTIONS)" \
286: LIBS="-L$$OPENWINHOME/lib $(LIBS)" \
287: X11FLAGS="$(X11FLAGS)" \
288: X11INCLUDES="-I$$OPENWINHOME/include $(X11INCLUDES)" \
289: X11LIBS="$(X11LIBS)" \
290: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
291: X11INSTALL="$(X11INSTALL)" \
292: TERMFLAGS="$(TERMFLAGS)"
293:
294: SUN_X11_MGR_FLAGS = \
295: CFLAGS="$(COPTS) $(OPTIONS)" \
296: LIBS="-lmgr -lpixrect -L/usr/mgr/lib $(LIBS)" \
297: X11FLAGS="$(X11FLAGS)" X11INCLUDES="$(X11INCLUDES)" \
298: X11LIBS="$(X11LIBS)" \
299: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
300: X11INSTALL="$(X11INSTALL)" \
301: TERMFLAGS="-I/usr/mgr/include -I. -Iterm -DMGR $(TERMFLAGS)"
302:
303: SGI_FLAGS = \
304: CFLAGS="-xansi $(COPTS) $(OPTIONS) -DHAVE_GETCWD -DNO_MEMCPY -DNO_MEMSET" \
305: LIBS="-lgl_s -lm -lX11_s $(LIBS)" X11FLAGS=" " X11INCLUDES=" " \
306: X11LIBS=" " \
307: PLOTXFLAG=" " GNUPLOT_X11=" " X11INSTALL=x11_noinstall \
308: TERMFLAGS="-I. -Iterm -DIRIS4D -DANSI" INSTALL="cp"
309:
310: SGIX11_FLAGS = \
311: CFLAGS="-xansi $(COPTS) $(OPTIONS) -DHAVE_GETCWD -DNO_MEMCPY -DNO_MEMSET" \
312: LIBS="-lgl_s -lm -lc_s -lX11_s $(LIBS)" X11FLAGS="$(X11FLAGS)" \
313: X11INCLUDES="$(X11INCLUDES)" \
314: X11LIBS="-lX11_s" \
315: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
316: X11INSTALL="$(X11INSTALL)" \
317: TERMFLAGS="-I. -Iterm -DX11 -DIRIS4D -DANSI" INSTALL="cp"
318: # TERMFLAGS="-I. -Iterm -DX11 -DIRIS4D -cckr" INSTALL="cp"
319:
320: CGI_FLAGS = \
321: CFLAGS="$(COPTS) $(OPTIONS) -Dunix -DNO_MEMCPY -DNO_MEMSET" \
322: LIBS="-lccgi $(LIBS)" X11FLAGS=" " X11INCLUDES=" " \
323: X11LIBS=" " PLOTXFLAG=" " GNUPLOT_X11=" " X11INSTALL=x11_noinstall \
324: TERMFLAGS="-I. -Iterm -DUNIXPLOT -DCGI"
325:
326: 3B1_FLAGS = \
327: CFLAGS="$(COPTS) $(OPTIONS) -DHAVE_GETCWD" \
328: LIBS="$(LIBS)" X11FLAGS=" " X11INCLUDES=" " \
329: X11LIBS=" " \
330: PLOTXFLAG=" " GNUPLOT_X11=" " X11INSTALL=x11_noinstall \
331: LD="ld /lib/crt0s.o /lib/shlib.ifile" \
332: TERMFLAGS="-I. -Iterm -DUNIXPC"
333:
334: 3B2_FLAGS = \
335: CFLAGS="$(COPTS) $(OPTIONS) -DHAVE_GETCWD" \
336: X11FLAGS=" " X11INCLUDES=" " \
337: X11LIBS=" " \
338: PLOTXFLAG=" " GNUPLOT_X11=" " X11INSTALL=x11_noinstall \
339: TERMFLAGS="-I. -Iterm -DUNIXPLOT" LIBS="$(LIBS) -lplot"
340:
341: 386IX_FLAGS = \
342: CFLAGS="$(COPTS) $(OPTIONS) -DHAVE_GETCWD -DTCSETSW -DTCGETS" \
343: LIBS="$(LIBS) -lcposix" X11FLAGS=" " X11INCLUDES=" " \
344: X11LIBS=" " PLOTXFLAG=" " GNUPLOT_X11=" " \
345: X11INSTALL=x11_noinstall \
346: TERMFLAGS="-I. -Iterm -DUNIXPLOT"
347:
348: 386IX_X11_FLAGS = \
349: CFLAGS="$(COPTS) $(OPTIONS) -DHAVE_GETCWD -DTCSETSW -DTCGETS" \
350: LIBS="$(LIBS) -lcposix" X11FLAGS="$(X11FLAGS)" X11INCLUDES="$(X11INCLUDES)" \
351: X11LIBS="$(X11LIBS)" PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11="$(GNUPLOT_X11)" \
352: X11INSTALL= "$(X11INSTALL)" \
353: TERMFLAGS="-I. -Iterm -DUNIXPLOT -DX11"
354:
355: ISC22_X11_FLAGS = \
356: CFLAGS="$(COPTS) $(OPTIONS) -DHAVE_GETCWD -DISC22" \
357: LIBS="$(LIBS) -lplot -lcposix" X11FLAGS="$(X11FLAGS)" X11INCLUDES="$(X11INCLUDES)" \
358: X11LIBS="$(X11LIBS) -linet -lpt -lcposix" PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11="$(GNUPLOT_X11)" \
359: X11INSTALL= "$(X11INSTALL)" \
360: TERMFLAGS="-I. -Iterm -DUNIXPLOT -DX11"
361:
362: AIX_FLAGS = \
363: CFLAGS="$(COPTS) $(OPTIONS) -DERF -DGAMMA=gamma -DXPG3_LOCALE -Dunix" \
364: LIBS="$(LIBS) -lbsd" X11FLAGS="$(X11FLAGS)" \
365: X11INCLUDES="$(X11INCLUDES)" \
366: X11LIBS="$(X11LIBS)" \
367: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
368: X11INSTALL="$(X11INSTALL)" \
369: TERMFLAGS="$(TERMFLAGS) -qmaxmem=9000"
370:
371: AIXO_FLAGS = \
372: CFLAGS="$(COPTS) $(OPTIONS) -DGAMMA=gamma -DXPG3_LOCALE -Dunix -DNO_MEMCPY -DNO_MEMSET" \
373: LIBS="$(LIBS) -lbsd" X11FLAGS="$(X11FLAGS)" \
374: X11INCLUDES="$(X11INCLUDES)" \
375: X11LIBS="$(X11LIBS)" \
376: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
377: X11INSTALL="$(X11INSTALL)" \
378: TERMFLAGS="$(TERMFLAGS)"
379:
380: NEXT_FLAGS = \
381: CFLAGS="$(COPTS) -DGAMMA=lgamma -DNEXT -DREADLINE -DHAVE_SGTTY_H -DHAVE_STRNCASECMP -DHAVE_LIBC_H $(OPTIONS)" \
382: LIBS="-lNeXT_s -lsys_s $(LIBS)" \
383: X11FLAGS="$(X11FLAGS)" \
384: X11INCLUDES=" " X11LIBS=" " PLOTXFLAG=" " \
385: GNUPLOT_X11=" " X11INSTALL=x11_noinstall \
386: TERMFLAGS="-I. -Iterm -ObjC -DANSI" OBJS=" $(OBJS) $(NEXTOBJS)"
387:
388: NEXT_X11_FLAGS = \
389: CFLAGS="$(COPTS) -DGAMMA=lgamma -DNEXT -DREADLINE -DHAVE_SGTTY_H -DHAVE_STRNCASECMP -DX_NOT_POSIX -DHAVE_LIBC_H $(OPTIONS)" \
390: LIBS="-lNeXT_s -lsys_s $(LIBS)" \
391: X11LIBS="-L/usr/lib/X11 -lX11" \
392: X11INCLUDES="$(X11INCLUDES)" X11FLAGS="$(X11FLAGS)" \
393: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
394: X11INSTALL="$(X11INSTALL)" \
395: TERMFLAGS="-I. -Iterm -DX11 -ObjC -DANSI" OBJS=" $(OBJS) $(NEXTOBJS)"
396:
397: CRAY_FLAGS = \
398: CFLAGS="$(COPTS) $(OPTIONS) -DHAVE_GETCWD -DNO_MEMCPY -DNO_MEMSET" \
399: LIBS="$(LIBS)" X11FLAGS=" " \
400: X11INCLUDES=" " \
401: X11LIBS=" " \
402: PLOTXFLAG=" " GNUPLOT_X11=" " \
403: X11INSTALL=x11_noinstall \
404: TERMFLAGS="-I. -Iterm"
405:
406: CRAY_X11_FLAGS = \
407: CFLAGS="$(COPTS) $(OPTIONS) -DHAVE_GETCWD -DNO_MEMSET -DNO_MEMCPY" \
408: LIBS="$(LIBS)" X11FLAGS="$(X11FLAGS)" \
409: X11INCLUDES="$(X11INCLUDES)" \
410: X11LIBS="$(X11LIBS)" \
411: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11="$(GNUPLOT_X11)" \
412: X11INSTALL=$(X11INSTALL) \
413: TERMFLAGS="-I. -Iterm -DX11"
414:
415: PTX_X11_FLAGS = \
416: CFLAGS="$(COPTS) $(OPTIONS) -DHAVE_GETCWD -DCRIPPLED_SELECT" \
417: LIBS="$(LIBS) -lplot" X11FLAGS="$(X11FLAGS)" \
418: X11INCLUDES="$(X11INCLUDES)" \
419: X11LIBS="-lX11 -lseq -lsocket -linet -lnsl" \
420: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11="$(GNUPLOT_X11)" \
421: X11INSTALL=$(X11INSTALL) \
422: TERMFLAGS="$(TERMFLAGS)"
423:
424: SEQUENT_X11_FLAGS = \
425: CFLAGS="$(COPTS) $(OPTIONS) -DHAVE_SGTTY_H -DCRIPPLED_SELECT -DNO_MEMSET -DNO_MEMCPY -DNO_STRCHR" \
426: LIBS="$(LIBS) -lplot" X11FLAGS="$(X11FLAGS) -DX_WCHAR" \
427: X11INCLUDES="$(X11INCLUDES)" \
428: X11LIBS="-lX11 -lseq " \
429: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11="$(GNUPLOT_X11)" \
430: X11INSTALL=$(X11INSTALL) \
431: TERMFLAGS="$(TERMFLAGS)"
432:
433: # Convex X11 uses -O1 for scalar optimization only
434:
435: CONVEX_X11_FLAGS = \
436: CFLAGS="$(COPTS) $(OPTIONS) -DHUGE=8.9e307 -O1 -DNO_MEMCPY -DNO_MEMSET" \
437: LIBS="$(LIBS)" X11FLAGS="$(X11FLAGS)" X11INCLUDES="$(X11INCLUDES)" \
438: X11LIBS="$(X11LIBS)" \
439: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
440: X11INSTALL="$(X11INSTALL)" \
441: TERMFLAGS="$(TERMFLAGS)"
442:
443: OSF_FLAGS = \
444: CFLAGS="$(COPTS) $(OPTIONS) -I/usr/sys/include -I/usr/sys/BINARY -DANSI -D_XOPEN_SOURCE -D__osf__ -DNO_MEMCPY -DNO_MEMSET" \
445: LIBS="$(LIBS)" \
446: X11FLAGS="$(X11FLAGS) -DMOTIF -D_NO_PROTO -D_OSF_SOURCE" \
447: X11INCLUDES="$(X11INCLUDES) -I/usr/include/Xm" \
448: X11LIBS="$(X11LIBS)" \
449: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
450: X11INSTALL="$(X11INSTALL)" \
451: TERMFLAGS="$(TERMFLAGS) "
452:
453: LINUX_FLAGS = \
454: CFLAGS="$(COPTS) $(OPTIONS) -DHAVE_STRNCASECMP -DGAMMA=lgamma -DHAVE_UNISTD_H -DLINUXVGA -D PROTOTYPE__P" \
455: LIBS="-lvga $(LIBS)" \
456: X11FLAGS="$(X11FLAGS)" \
457: X11INCLUDES="-I/usr/X386/include $(X11INCLUDES)" \
458: X11LIBS="-L/usr/X386/lib $(X11LIBS)" \
459: PLOTXFLAG="$(PLOTXFLAG)" GNUPLOT_X11=$(GNUPLOT_X11) \
460: X11INSTALL="$(X11INSTALL)" \
461: TERMFLAGS="$(TERMFLAGS) -DX11"
462:
463: ####################################################################
464: # List of source files
465: # Used for making shar files, lint, and some dependencies.
466: DIRS = term demo docs docs/latextut
467:
468: CSOURCE1 = bf_test.c binary.c command.c set.c show.c
469: CSOURCE2 = help.c graphics.c graph3d.c internal.c
470: CSOURCE3 = misc.c eval.c parse.c plot.c plot2d.o plot3d.o readline.c scanner.c standard.c stdfn.c
471: CSOURCE4 = bitmap.c term.c time.c util.c version.c fit.c matrix.c
472: CSOURCE5 = term/ai.trm term/amiga.trm term/aed.trm term/atariaes.trm term/atarivdi.trm \
473: term/cgi.trm term/corel.trm \
474: term/djsvga.trm term/dumb.trm \
475: term/dxf.trm term/dxy.trm term/debug.trm \
476: term/emxvga.trm term/eepic.trm term/epson.trm term/excl.trm \
477: term/fig.trm term/grass.trm term/hp26.trm term/hp2648.trm term/hpgl.trm \
478: term/hp500c.trm term/hpljii.trm term/metafont.trm term/mgr.trm\
479: term/apollo.trm term/gpr.trm term/hppj.trm term/compact.c
480: CSOURCE6 = term/impcodes.h term/imagen.trm term/next.trm term/object.h \
481: term/iris4d.trm term/kyo.trm term/latex.trm term/mif.trm \
482: term/pbm.trm term/pslatex.trm term/gpic.trm term/gnugraph.trm
483: CSOURCE7 = term/post.trm term/pstricks.trm term/qms.trm term/regis.trm \
484: term/rgip.trm term/sun.trm\
485: term/t410x.trm term/tek.trm term/texdraw.trm \
486: term/tgif.trm term/tpic.trm \
487: term/unixpc.trm term/unixplot.trm \
488: term/v384.trm term/vws.trm term/x11.trm term/xlib.trm term/linux.trm
489: CSOURCE8 = contour.c specfun.c gplt_x11.c interpol.c
490: CONFIGURE = configure configure.in Makefile.in docs/Makefile.in\
491: docs/latextut/Makefile.in
492: NEXTSRC = epsviewe.m epsviewe.h
493: # not C code, but still needed
494:
495: DEMOS = demo/1.dat demo/2.dat demo/3.dat demo/contours.dem \
496: demo/controls.dem demo/electron.dem demo/glass.dat demo/param.dem \
497: demo/polar.dem demo/simple.dem demo/surface1.dem \
498: demo/surface2.dem demo/using.dat demo/using.dem demo/world.cor \
499: demo/world.dat demo/world.dem \
500: demo/err.dat demo/poldat.dem demo/errorbar.dem \
501: demo/all.dem demo/animate.dem demo/bivariat.dem \
502: demo/prob.dem demo/stat.inc demo/prob2.dem demo/random.dem \
503: demo/discrete.dem demo/hidden.dem demo/airfoil.dem demo/gnuplot.rot\
504: demo/binary.dem demo/spline.dem demo/steps.dem demo/steps.dat \
505: demo/multimsh.dem demo/whale.dat demo/hemisphr.dat \
506: demo/scatter.dem demo/scatter2.dat demo/singulr.dem demo/klein.dat
507:
508: ETC = Copyright 0README README.gnu README.ami makefile.unx makefile.vms \
509: linkopt.amg makefile.amg makefile.ami linkopt.vms buildvms.com \
510: lasergnu makefile.r makefile.nt makefile.g 0FAQ 0BUGS\
511: term/README History gnuplot.el intergra.x11 0INSTALL README.3p1\
512: README.3p2 README.3p3 README.3p4 README.pro README.nex README.x11 \
513: README.3d README.mf README.win README.iso README.3p5 README.pic \
514: README.xli $(CONFIGURE)
515:
516: #BETA files (not standard distribution files)
517: BETA =
518: # PC-specific files
519: PC = corgraph.asm corplot.c header.mac hrcgraph.asm lineproc.mac \
520: linkopt.msc makefile.msc makefile.tc makefile.st makefile.djg \
521: pcgraph.asm gnuplot.def makefile.286 makefile.emx \
522: makefile.ztc linkopt.ztc term/fg.trm term/pc.trm
523: WINDOWS = makefile.win makefile.msw README.win win/wcommon.h \
524: win/wgnuplib.c win/wgnuplib.def win/wgnuplib.h win/wgnuplib.rc \
525: win/wgnuplot.def win/wgnuplot.hpj win/wgnuplot.mnu win/wgnuplot.rc \
526: win/wgraph.c win/winmain.c win/wmenu.c win/wpause.c \
527: win/wprinter.c win/wresourc.h win/wtext.c win/wtext.h \
528: win/geticon.c docs/doc2rtf.c term/win.trm
529: OS2 = makefile.os2 os2/makefile os2/dialogs.c os2/dialogs.h os2/gclient.c \
530: os2/gnuicon.uue os2/gnupmdrv.c os2/gnupmdrv.def os2/gnupmdrv.h \
531: os2/gnupmdrv.itl os2/gnupmdrv.rc os2/print.c docs/doc2ipf.c \
532: README.os2 term/pm.trm
533:
534: # Documentation and help files
535: DOCS1 = docs/makefile docs/README docs/checkdoc.c docs/doc2gih.c \
536: docs/doc2hlp.c docs/doc2hlp.com docs/doc2ms.c docs/doc2tex.c \
537: docs/gnuplot.1 docs/lasergnu.1 docs/toc_entr.sty docs/doc2info.pl \
538: docs/titlepag.ms docs/titlepag.tex docs/makefile.ami \
539: docs/doc2rtf.c
540: DOCS2 = docs/gnuplot.doc docs/gpcard.tex
541: DOCS3 = docs/latextut/makefile docs/latextut/eg1.plt \
542: docs/latextut/eg2.plt docs/latextut/eg3.dat docs/latextut/eg3.plt \
543: docs/latextut/eg4.plt docs/latextut/eg5.plt docs/latextut/eg6.plt \
544: docs/latextut/header.tex docs/latextut/tutorial.tex \
545: docs/latextut/linepoin.plt
546:
547: #########################################################################
548: # Default target (informational)
549: info:
550: @echo "Please do a 'make <MACHINE>' where <MACHINE> is one of the following:"
551: @echo
552: @echo "apollo for Apollo running SR10.3 with Apollo's X11"
553: @echo "dec_osf for Dec3100/5000 running DEC OSF/1 v1.0"
554: @echo "dec for Dec3100/5000 running Ultrix 3.1d with MIT's X11"
555: @echo "hp8 for HP/9000 700 series running HP/UX 8.0 with MIT's X11R4"
556: @echo "hp for HP/9000 700 series running HP/UX 9.01 with MIT's X11R5"
557: @echo "sun for Sun sparcstation running SunOS 4.1 with suntools (no X11) "
558: @echo "sun_x11 for Sun sparcstation running SunOS 4.1 with suntools and X11 "
559: @echo "solaris_x11 for Sun Sparcstation running Solaris 2 with X11 "
560: @echo "sgi for Silicon Graphics IRIS4D machines (no X11) "
561: @echo "sgix11 for Silicon Graphics IRIS4D machines (X11) "
562: @echo "next for NeXT Cube and Slab running NeXTOS 2.0+ (no X11)"
563: @echo "next_x11 for NeXT Cube and Slab running NeXTOS 2.0+ with X11"
564: @echo "3b1 for ATT 3b1 machines (no X11) "
565: @echo "3b2 for ATT 3b2 machines (no X11) "
566: @echo "386ix for 386 machines running 386/ix (no X11)"
567: @echo "386ix_x11 for 386 machines running 386/ix with T.Roell X386"
568: @echo "isc22_x11 for 386 machines running ISC 2.2 with T.Roell X386"
569: @echo "aix32 for IBM RS/6000 running AIX 3.2 with xlc 1.2"
570: @echo "aix32o for IBM RS/6000 running AIX 3.2 with xlc 1.1"
571: @echo "x11 for a generic machine (like a sun or dec) with MIT's X11"
572: @echo "cray for Cray Y-MP or Cray-2 running Unicos 6.0 or 6.1 (no X11)"
573: @echo "cray_x11 for Cray Y-MP or Cray-2 running Unicos 6.0 or 6.1 with X11"
574: @echo "ptx_x11 for Sequent Dynix/PTX with MIT X11"
575: @echo "sequent_x11 for Sequent Symmetry (DYNIX 3) with X11"
576: @echo "convex_x11 for Convex 9.0 or up with MIT X11"
577: @echo "osf for KSR1 running DEC OSF/1 v1.0 (use make -j 16)"
578: @echo "linux for LINUX with XFree86 or vgalib"
579: @echo
580: @echo "Examples:"
581: @echo
582: @echo " make x11"
583: @echo " make apollo"
584: @echo " make apollo OPTIONS='-DNOCWDRC' "
585: @echo " make apollo DEST='/usr/um/misc/bin' "
586: @echo " make dec"
587: @echo " make hp"
588: @echo " make next"
589: @echo " make solaris_x11"
590: @echo " make sun HELPDEST='/usr/um/misc/lib' "
591: @echo " make sun X11INCLUDES='-I/usr/local/include' "
592: @echo " make sun_x11"
593: @echo " make sgi"
594: @echo " make 3b1"
595: @echo " make 386ix"
596: @echo " make 386ix_x11"
597: @echo " make isc22_x11"
598: @echo " make aix32 MANDEST='/usr/um/misc/man/man1' COPTS='-O' "
599: @echo " make cray"
600: @echo " make cray_x11"
601: @echo
602: @echo "If you just type 'make All' , it will build gnuplot for Unix X11"
603: @echo "and the following variables will be used as default:"
604: @echo
605: @echo " DEST " $(DEST)
606: @echo " MANDEST " $(MANDEST)
607: @echo " HELPDEST " $(HELPDEST)
608: @echo " EMAIL " $(EMAIL)
609: @echo " CC " $(CC)
610: @echo " COPTS " $(COPTS)
611: @echo " OPTIONS " $(OPTIONS)
612: @echo " CFLAGS " $(CFLAGS)
613: @echo " LIBS " $(LIBS)
614: @echo " X11FLAGS " $(X11FLAGS)
615: @echo " X11LIBS " $(X11LIBS)
616: @echo " X11INCLUDES " $(X11INCLUDES)
617: @echo " TERMFLAGS " $(TERMFLAGS)
618: @echo " LASERGNU " $(LASERGNU)
619: @echo
620: @echo "If you are not familiar with makefiles or just want to know what"
621: @echo " 'make <MACHINE>' would do without actually doing anything, then type"
622: @echo " 'make <MACHINE> -n' "
623: @echo
624:
625: ###############################################################
626: # Targets for each machine
627:
628: x11:
629: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(X11_FLAGS) $(TARGET)
630:
631: dec_osf:
632: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(DEC_OSF_FLAGS) $(TARGET)
633:
634: dec:
635: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(DEC_FLAGS) $(TARGET)
636:
637: apollo:
638: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(APOLLO_FLAGS) $(TARGET)
639:
640: hp8:
641: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(HP8_FLAGS) $(TARGET)
642:
643: hp:
644: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(HP9_FLAGS) $(TARGET)
645:
646: next:
647: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(NEXT_FLAGS) $(TARGET)
648:
649: next_x11:
650: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(NEXT_X11_FLAGS) $(TARGET)
651:
652: solaris_x11:
653: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(SOLARIS_X11_FLAGS) $(TARGET)
654:
655: sun:
656: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(SUN_FLAGS) $(TARGET)
657:
658: sun_x11:
659: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(SUN_X11_FLAGS) $(TARGET)
660:
661: sun_x11_mgr:
662: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(SUN_X11_MGR_FLAGS) $(TARGET)
663:
664: sgi:
665: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(SGI_FLAGS) $(TARGET)
666:
667: sgix11:
668: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(SGIX11_FLAGS) $(TARGET)
669:
670: cgi:
671: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(CGI_FLAGS) $(TARGET)
672:
673: 3b1:
674: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(3B1_FLAGS) $(TARGET)
675:
676: 3b2:
677: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(3B2_FLAGS) $(TARGET)
678:
679: 386ix:
680: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(386IX_FLAGS) $(TARGET)
681:
682: 386ix_x11:
683: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(386IX_X11_FLAGS) $(TARGET)
684:
685: isc22_x11:
686: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(ISC22_X11_FLAGS) $(TARGET)
687:
688: aix32:
689: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(AIX_FLAGS) $(TARGET)
690:
691: aix32o:
692: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(AIXO_FLAGS) $(TARGET)
693:
694: cray:
695: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(CRAY_FLAGS) $(TARGET)
696:
697: cray_x11:
698: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(CRAY_X11_FLAGS) $(TARGET)
699:
700: ptx_x11:
701: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(PTX_X11_FLAGS) $(TARGET)
702:
703: sequent_x11:
704: make $(MFLAGS) $(MY_FLAGS) $(SEQUENT_X11_FLAGS) $(TARGET)
705:
706: convex_x11:
707: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(CONVEX_X11_FLAGS) $(TARGET)
708:
709: osf:
710: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(OSF_FLAGS) $(TARGET)
711:
712: linux:
713: $(MAKE) $(MFLAGS) $(MY_FLAGS) $(LINUX_FLAGS) $(TARGET)
714:
715: #############################################################
716: # Targets that really do something
717:
718: all:
719: @echo "Please just type 'make' in order to get some information on "
720: @echo "how to build gnuplot under Unix and the X Window System."
721:
722: All: gnuplot $(GNUPLOT_X11) doc demo/binary1
723:
724: gnuplot: $(OBJS) version.o
725: $(LD) -o gnuplot $(OBJS) version.o $(LIBS)
726:
727: doc:
728: ( cd docs; $(MAKE) $(MFLAGS) $(MY_FLAGS) gnuplot.gih )
729:
730: gnuplot_x11: gplt_x11.c stdfn.c
731: $(CC) $(CFLAGS) $(X11FLAGS) $(X11INCLUDES) -o gnuplot_x11 \
732: stdfn.c gplt_x11.c $(X11LIBS)
733:
734: demo/binary1 demo/binary2 demo/binary3: bf_test
735: ( cd demo; ../bf_test )
736:
737: bf_test: bf_test.o binary.o alloc.o
738: $(CC) $(CFLAGS) bf_test.o binary.o alloc.o -lm -o bf_test
739: ################################################################
740: # Installation instructions
741:
742: install:
743: @echo
744: @echo "Please do a 'make <MACHINE> TARGET=Install' where <MACHINE> is one of the following:"
745: @echo
746: @echo "apollo, dec, hp, sun, sun_x11, sgi, sgix11, cgi,"
747: @echo "next, next_x11, 3b1, 386ix, 386ix_x11, aix32, aix32o,"
748: @echo "x11, cray, cray_x11, ptx_x11, sequent_x11, convex_x11"
749: @echo
750: @echo "Examples:"
751: @echo
752: @echo " make x11 TARGET=Install "
753: @echo " make apollo TARGET=Install "
754: @echo " make dec TARGET=Install "
755: @echo " make hp TARGET=Install "
756: @echo " make sun TARGET=Install HELPDEST='/usr/um/misc/lib BINDIR='/usr/um/misc/bin' "
757: @echo " make aix32 TARGET=Install MANDEST='/usr/um/misc/man/man1' COPTS='-O' "
758: @echo
759: ################################################################
760: # Installation targets
761:
762: Install: All man_install $(X11INSTALL) $(LASERGNU)
763: cp gnuplot $(DEST)
764: strip $(DEST)/gnuplot
765: ( cd docs; $(MAKE) $(MFLAGS) $(MY_FLAGS) install-unix HELPDEST=$(HELPDEST) INSTALL="$(INSTALL)")
766:
767: x11_install: gnuplot_x11
768: cp gnuplot_x11 $(DEST)
769: strip $(DEST)/gnuplot_x11
770:
771: x11_noinstall:
772: @echo "X11 not requested, so gnuplot_x11 program not installed"
773:
774: man_install: docs/gnuplot.1
775: cp docs/gnuplot.1 $(MANDEST)
776:
777: lasergnu_install: lasergnu docs/lasergnu.1
778: cp lasergnu $(DEST)
779: chmod 755 $(DEST)/lasergnu
780: cp docs/lasergnu.1 $(MANDEST)
781:
782: lasergnu_noinstall:
783: @echo
784: @echo "Lasergnu will not be installed by default."
785: @echo "If you think you need the lasergnu script to print"
786: @echo " files on the imagen or PostScript printers, then"
787: @echo " type"
788: @echo " 'make <MACHINE> TARGET=Install LASERGNU='lasergnu_install' "
789: @echo
790: @echo "Lasergnu is really not needed since within gnuplot you can"
791: @echo " can create files (in impress or PostScript language) and"
792: @echo " print them through your favorite print command (lpr, lp, prf, ipr)."
793: @echo
794:
795: ################################################################
796: # Dependencies
797:
798: plot.o: plot.c
799: $(CC) $(CFLAGS) $(PLOTXFLAG) -c plot.c
800:
801: term.o: term.h term.c $(CSOURCE5) $(CSOURCE6) $(CSOURCE7)
802: $(CC) $(CFLAGS) $(TERMFLAGS) -c term.c
803:
804: version.o: version.c
805: $(CC) $(CFLAGS) -DCONTACT=\"$(EMAIL)\" -c version.c
806:
807: epsviewe.o : epsviewe.h epsviewe.m
808: $(CC) -ObjC -c epsviewe.m
809:
810: $(OBJS): plot.h
811:
812: command.o: command.c binary.h fit.h plot.h
813: $(CC) $(CFLAGS) -c command.c -DHELPFILE=\"$(HELPDEST)/gnuplot.gih\"
814:
815: show.o: show.c plot.h setshow.h
816: $(CC) $(CFLAGS) -DHELPFILE=\"$(HELPFILE)\" -DGNUPLOT_BINDIR=\"$(DEST)\" -c $<
817:
818:
819: command.o help.o misc.o parse.o: help.h
820:
821: command.o graphics.o graph3d.o misc.o plot.o set.o show.o term.o: setshow.h
822:
823: fit.o: fit.c fit.h matrix.h plot.h
824:
825: matrix.o: matrix.c matrix.h fit.h
826:
827: bitmap.o term.o: bitmap.h
828:
829: ################################################################
830: # Miscellaneous targets
831:
832: SOURCES=plot.h help.h setshow.h bitmap.h term.h $(CSOURCE1) $(CSOURCE2) \
833: $(CSOURCE3) $(CSOURCE4) $(CSOURCE5) $(CSOURCE6) $(CSOURCE7)\
834: $(CSOURCE8) $(NEXTSRC) $(WINDOWS) $(OS2)
835:
836: DOCS = $(DOCS1) $(DOCS2) $(DOCS3)
837:
838: lint:
839: lint -hx $(SOURCES)
840:
841: clean:
842: rm -f *.o *.orig *.rej *~ *.bak term/*~ term/*.orig term/*.bak
843: ( cd docs; $(MAKE) $(MFLAGS) clean )
844: ( cd docs/latextut; $(MAKE) $(MFLAGS) clean )
845:
846: spotless:
847: rm -f *.o *~ *.orig *.rej *.bak term/*~ term/*.orig term/*.bak \
848: TAGS gnuplot gnuplot_x11 bf_test demo/binary[1-3] \
849: demo/temp.set demo/defaults.ini
850: ( cd docs; $(MAKE) $(MFLAGS) clean )
851: ( cd docs/latextut; $(MAKE) $(MFLAGS) spotless )
852:
853: ################################################################
854: # Making shar files for mailing gnuplot
855:
856: shar: gnuplot.sh00 gnuplot.sh01 gnuplot.sh02 gnuplot.sh03 gnuplot.sh04 \
857: gnuplot.sh05 gnuplot.sh06 gnuplot.sh07 gnuplot.sh08 \
858: gnuplot.sh09 gnuplot.sh10 gnuplot.sh11 gnuplot.sh12 \
859: gnuplot.sh13 gnuplot.sh14 gnuplot.sh15 gnuplot.sh16
860:
861: gnuplot.sh00:
862: echo '#!/bin/sh' > gnuplot.sh00
863: echo '# This is a shell file to make directories' >> gnuplot.sh00
864: echo mkdir $(DIRS) >> gnuplot.sh00
865:
866: gnuplot.sh01: $(ETC)
867: shar $(ETC) > gnuplot.sh01
868:
869: gnuplot.sh02: $(DOCS1)
870: shar $(DOCS1) > gnuplot.sh02
871:
872: gnuplot.sh03: $(DOCS2)
873: shar $(DOCS2) > gnuplot.sh03
874:
875: gnuplot.sh04: $(DOCS3)
876: shar $(DOCS3) > gnuplot.sh04
877:
878: gnuplot.sh05: $(CSOURCE1)
879: shar $(CSOURCE1) > gnuplot.sh05
880:
881: gnuplot.sh06: $(CSOURCE2)
882: shar $(CSOURCE2) > gnuplot.sh06
883:
884: gnuplot.sh07: $(CSOURCE3)
885: shar $(CSOURCE3) > gnuplot.sh07
886:
887: gnuplot.sh08: $(CSOURCE4)
888: shar $(CSOURCE4) > gnuplot.sh08
889:
890: gnuplot.sh09: $(CSOURCE5)
891: shar $(CSOURCE5) > gnuplot.sh09
892:
893: gnuplot.sh10: $(CSOURCE6)
894: shar $(CSOURCE6) > gnuplot.sh10
895:
896: gnuplot.sh11: $(CSOURCE7)
897: shar $(CSOURCE7) > gnuplot.sh11
898:
899: gnuplot.sh12: $(PC)
900: shar $(PC) > gnuplot.sh12
901:
902: gnuplot.sh13: $(CSOURCE8)
903: shar $(CSOURCE8) > gnuplot.sh13
904:
905: gnuplot.sh14: $(DEMOS)
906: shar $(DEMOS) > gnuplot.sh14
907:
908: gnuplot.sh15: $(WINDOWS)
909: shar $(WINDOWS) > gnuplot.sh15
910:
911: gnuplot.sh16: $(BETA)
912: shar $(BETA) > gnuplot.sh16
913:
914: tar: $(ETC) $(SOURCES) $(PC) $(DEMOS) $(BETA) $(DOCS)
915: $(TAR) cvf /tmp/gnuplot.tar $(ETC) $(SOURCES) $(PC)\
916: $(DEMOS) $(BETA) $(DOCS)
917: #
918: # the following uses Rick Saltz's makekit shar generation tools
919: #
920:
921: kit: $(ETC) $(SOURCES) $(PC) $(DEMOS) $(BETA) $(DOCS)
922: makekit -s135k -k30 $(ETC) $(SOURCES) $(PC)\
923: $(DEMOS) $(BETA) $(DOCS)
924:
925: branch: rcs rcsdoc rcsdemo
926:
927: rcs:
928: rcs -b$(RCSVER) $(ETC) $(SOURCES) $(PC)
929:
930: rcsdoc:
931: rcs -b$(RCSVER) $(DOCS)
932:
933: rcsdemo:
934: rcs -b$(RCSVER) $(DEMOS)
935:
936: ciall: ci cidoc cidemo
937:
938: ci:
939: ci -l$(RCSVER) -m$(RCSCOM) -t-$(RCSCOM) $(SOURCES) $(PC) $(ETC)
940:
941: cidoc:
942: ci -l$(RCSVER) -m$(RCSCOM) -t-$(RCSCOM) $(DOCS)
943:
944: cidemo:
945: ci -l$(RCSVER) -m$(RCSCOM) -t-$(RCSCOM) $(DEMOS)
946:
947: ciforce:
948: ci -f$(RCSVER) -m$(RCSCOM) -t-$(RCSCOM) $(SOURCES) $(ETC) $(DOCS) $(DEMOS) $(PC)
949:
950: coall: co codoc codemo
951:
952: co:
953: co -l -r$(RCSVER) $(ETC) $(SOURCES) $(PC)
954:
955: codoc:
956: co -l -r$(RCSVER) $(DOCS)
957:
958: codemo:
959: co -l -r$(RCSVER) $(DEMOS)
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to makefile.unx CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM_contrib / gnuplot