Annotation of OpenXM_contrib/gnuplot/missing, Revision 1.1.1.2
1.1 maekawa 1: #! /bin/sh
2: # Common stub for a few missing GNU programs while installing.
1.1.1.2 ! ohara 3: # Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
! 4: # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
1.1 maekawa 5:
6: # This program is free software; you can redistribute it and/or modify
7: # it under the terms of the GNU General Public License as published by
8: # the Free Software Foundation; either version 2, or (at your option)
9: # any later version.
10:
11: # This program is distributed in the hope that it will be useful,
12: # but WITHOUT ANY WARRANTY; without even the implied warranty of
13: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14: # GNU General Public License for more details.
15:
16: # You should have received a copy of the GNU General Public License
17: # along with this program; if not, write to the Free Software
18: # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
19: # 02111-1307, USA.
20:
1.1.1.2 ! ohara 21: # As a special exception to the GNU General Public License, if you
! 22: # distribute this file as part of a program that contains a
! 23: # configuration script generated by Autoconf, you may include it under
! 24: # the same distribution terms that you use for the rest of that program.
! 25:
1.1 maekawa 26: if test $# -eq 0; then
27: echo 1>&2 "Try \`$0 --help' for more information"
28: exit 1
29: fi
30:
1.1.1.2 ! ohara 31: run=:
! 32:
! 33: # In the cases where this matters, `missing' is being run in the
! 34: # srcdir already.
! 35: if test -f configure.ac; then
! 36: configure_ac=configure.ac
! 37: else
! 38: configure_ac=configure.in
! 39: fi
! 40:
! 41: case "$1" in
! 42: --run)
! 43: # Try to run requested program, and just exit if it succeeds.
! 44: run=
! 45: shift
! 46: "$@" && exit 0
! 47: ;;
! 48: esac
! 49:
! 50: # If it does not exist, or fails to run (possibly an outdated version),
! 51: # try to emulate it.
1.1 maekawa 52: case "$1" in
53:
54: -h|--h|--he|--hel|--help)
55: echo "\
56: $0 [OPTION]... PROGRAM [ARGUMENT]...
57:
58: Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
59: error status if there is no known handling for PROGRAM.
60:
61: Options:
62: -h, --help display this help and exit
63: -v, --version output version information and exit
1.1.1.2 ! ohara 64: --run try to run the given command, and emulate it if it fails
1.1 maekawa 65:
66: Supported PROGRAM values:
67: aclocal touch file \`aclocal.m4'
68: autoconf touch file \`configure'
69: autoheader touch file \`config.h.in'
70: automake touch all \`Makefile.in' files
71: bison create \`y.tab.[ch]', if possible, from existing .[ch]
72: flex create \`lex.yy.c', if possible, from existing .c
1.1.1.2 ! ohara 73: help2man touch the output file
1.1 maekawa 74: lex create \`lex.yy.c', if possible, from existing .c
75: makeinfo touch the output file
1.1.1.2 ! ohara 76: tar try tar, gnutar, gtar, then tar without non-portable flags
1.1 maekawa 77: yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
78: ;;
79:
80: -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
1.1.1.2 ! ohara 81: echo "missing 0.4 - GNU automake"
1.1 maekawa 82: ;;
83:
84: -*)
85: echo 1>&2 "$0: Unknown \`$1' option"
86: echo 1>&2 "Try \`$0 --help' for more information"
87: exit 1
88: ;;
89:
1.1.1.2 ! ohara 90: aclocal*)
! 91: if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
! 92: # We have it, but it failed.
! 93: exit 1
! 94: fi
! 95:
1.1 maekawa 96: echo 1>&2 "\
97: WARNING: \`$1' is missing on your system. You should only need it if
1.1.1.2 ! ohara 98: you modified \`acinclude.m4' or \`${configure_ac}'. You might want
1.1 maekawa 99: to install the \`Automake' and \`Perl' packages. Grab them from
100: any GNU archive site."
101: touch aclocal.m4
102: ;;
103:
104: autoconf)
1.1.1.2 ! ohara 105: if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
! 106: # We have it, but it failed.
! 107: exit 1
! 108: fi
! 109:
1.1 maekawa 110: echo 1>&2 "\
111: WARNING: \`$1' is missing on your system. You should only need it if
1.1.1.2 ! ohara 112: you modified \`${configure_ac}'. You might want to install the
1.1 maekawa 113: \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
114: archive site."
115: touch configure
116: ;;
117:
118: autoheader)
1.1.1.2 ! ohara 119: if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
! 120: # We have it, but it failed.
! 121: exit 1
! 122: fi
! 123:
1.1 maekawa 124: echo 1>&2 "\
125: WARNING: \`$1' is missing on your system. You should only need it if
1.1.1.2 ! ohara 126: you modified \`acconfig.h' or \`${configure_ac}'. You might want
1.1 maekawa 127: to install the \`Autoconf' and \`GNU m4' packages. Grab them
128: from any GNU archive site."
1.1.1.2 ! ohara 129: files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
! 130: test -z "$files" && files="config.h"
! 131: touch_files=
! 132: for f in $files; do
! 133: case "$f" in
! 134: *:*) touch_files="$touch_files "`echo "$f" |
! 135: sed -e 's/^[^:]*://' -e 's/:.*//'`;;
! 136: *) touch_files="$touch_files $f.in";;
! 137: esac
! 138: done
! 139: touch $touch_files
1.1 maekawa 140: ;;
141:
1.1.1.2 ! ohara 142: automake*)
! 143: if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
! 144: # We have it, but it failed.
! 145: exit 1
! 146: fi
! 147:
1.1 maekawa 148: echo 1>&2 "\
149: WARNING: \`$1' is missing on your system. You should only need it if
1.1.1.2 ! ohara 150: you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
1.1 maekawa 151: You might want to install the \`Automake' and \`Perl' packages.
152: Grab them from any GNU archive site."
1.1.1.2 ! ohara 153: find . -type f -name Makefile.am -print |
! 154: sed 's/\.am$/.in/' |
! 155: while read f; do touch "$f"; done
! 156: ;;
! 157:
! 158: autom4te)
! 159: if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
! 160: # We have it, but it failed.
! 161: exit 1
! 162: fi
! 163:
! 164: echo 1>&2 "\
! 165: WARNING: \`$1' is needed, and you do not seem to have it handy on your
! 166: system. You might have modified some files without having the
! 167: proper tools for further handling them.
! 168: You can get \`$1Help2man' as part of \`Autoconf' from any GNU
! 169: archive site."
! 170:
! 171: file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
! 172: test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
! 173: if test -f "$file"; then
! 174: touch $file
! 175: else
! 176: test -z "$file" || exec >$file
! 177: echo "#! /bin/sh"
! 178: echo "# Created by GNU Automake missing as a replacement of"
! 179: echo "# $ $@"
! 180: echo "exit 0"
! 181: chmod +x $file
! 182: exit 1
! 183: fi
1.1 maekawa 184: ;;
185:
186: bison|yacc)
187: echo 1>&2 "\
188: WARNING: \`$1' is missing on your system. You should only need it if
189: you modified a \`.y' file. You may need the \`Bison' package
190: in order for those modifications to take effect. You can get
191: \`Bison' from any GNU archive site."
192: rm -f y.tab.c y.tab.h
193: if [ $# -ne 1 ]; then
194: eval LASTARG="\${$#}"
195: case "$LASTARG" in
196: *.y)
197: SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
198: if [ -f "$SRCFILE" ]; then
199: cp "$SRCFILE" y.tab.c
200: fi
201: SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
202: if [ -f "$SRCFILE" ]; then
203: cp "$SRCFILE" y.tab.h
204: fi
205: ;;
206: esac
207: fi
208: if [ ! -f y.tab.h ]; then
209: echo >y.tab.h
210: fi
211: if [ ! -f y.tab.c ]; then
212: echo 'main() { return 0; }' >y.tab.c
213: fi
214: ;;
215:
216: lex|flex)
217: echo 1>&2 "\
218: WARNING: \`$1' is missing on your system. You should only need it if
219: you modified a \`.l' file. You may need the \`Flex' package
220: in order for those modifications to take effect. You can get
221: \`Flex' from any GNU archive site."
222: rm -f lex.yy.c
223: if [ $# -ne 1 ]; then
224: eval LASTARG="\${$#}"
225: case "$LASTARG" in
226: *.l)
227: SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
228: if [ -f "$SRCFILE" ]; then
229: cp "$SRCFILE" lex.yy.c
230: fi
231: ;;
232: esac
233: fi
234: if [ ! -f lex.yy.c ]; then
235: echo 'main() { return 0; }' >lex.yy.c
236: fi
237: ;;
238:
1.1.1.2 ! ohara 239: help2man)
! 240: if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
! 241: # We have it, but it failed.
! 242: exit 1
! 243: fi
! 244:
! 245: echo 1>&2 "\
! 246: WARNING: \`$1' is missing on your system. You should only need it if
! 247: you modified a dependency of a manual page. You may need the
! 248: \`Help2man' package in order for those modifications to take
! 249: effect. You can get \`Help2man' from any GNU archive site."
! 250:
! 251: file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
! 252: if test -z "$file"; then
! 253: file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
! 254: fi
! 255: if [ -f "$file" ]; then
! 256: touch $file
! 257: else
! 258: test -z "$file" || exec >$file
! 259: echo ".ab help2man is required to generate this page"
! 260: exit 1
! 261: fi
! 262: ;;
! 263:
1.1 maekawa 264: makeinfo)
1.1.1.2 ! ohara 265: if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
! 266: # We have makeinfo, but it failed.
! 267: exit 1
! 268: fi
! 269:
1.1 maekawa 270: echo 1>&2 "\
271: WARNING: \`$1' is missing on your system. You should only need it if
272: you modified a \`.texi' or \`.texinfo' file, or any other file
273: indirectly affecting the aspect of the manual. The spurious
274: call might also be the consequence of using a buggy \`make' (AIX,
275: DU, IRIX). You might want to install the \`Texinfo' package or
276: the \`GNU make' package. Grab either from any GNU archive site."
277: file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
278: if test -z "$file"; then
279: file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
280: file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
281: fi
282: touch $file
1.1.1.2 ! ohara 283: ;;
! 284:
! 285: tar)
! 286: shift
! 287: if test -n "$run"; then
! 288: echo 1>&2 "ERROR: \`tar' requires --run"
! 289: exit 1
! 290: fi
! 291:
! 292: # We have already tried tar in the generic part.
! 293: # Look for gnutar/gtar before invocation to avoid ugly error
! 294: # messages.
! 295: if (gnutar --version > /dev/null 2>&1); then
! 296: gnutar "$@" && exit 0
! 297: fi
! 298: if (gtar --version > /dev/null 2>&1); then
! 299: gtar "$@" && exit 0
! 300: fi
! 301: firstarg="$1"
! 302: if shift; then
! 303: case "$firstarg" in
! 304: *o*)
! 305: firstarg=`echo "$firstarg" | sed s/o//`
! 306: tar "$firstarg" "$@" && exit 0
! 307: ;;
! 308: esac
! 309: case "$firstarg" in
! 310: *h*)
! 311: firstarg=`echo "$firstarg" | sed s/h//`
! 312: tar "$firstarg" "$@" && exit 0
! 313: ;;
! 314: esac
! 315: fi
! 316:
! 317: echo 1>&2 "\
! 318: WARNING: I can't seem to be able to run \`tar' with the given arguments.
! 319: You may want to install GNU tar or Free paxutils, or check the
! 320: command line arguments."
! 321: exit 1
1.1 maekawa 322: ;;
323:
324: *)
325: echo 1>&2 "\
326: WARNING: \`$1' is needed, and you do not seem to have it handy on your
327: system. You might have modified some files without having the
328: proper tools for further handling them. Check the \`README' file,
329: it often tells you about the needed prerequirements for installing
330: this package. You may also peek at any GNU archive site, in case
331: some other package would contain this missing \`$1' program."
332: exit 1
333: ;;
334: esac
335:
336: exit 0
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to missing CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM_contrib / gnuplot