File: [local] / OpenXM_contrib / gnuplot / Attic / set.c (download)
Revision 1.1.1.3 (vendor branch), Mon Sep 15 07:09:26 2003 UTC (20 years, 11 months ago) by ohara
Branch: GNUPLOT
CVS Tags: VERSION_3_7_3, RELEASE_1_2_3, RELEASE_1_2_2_KNOPPIX_b, RELEASE_1_2_2_KNOPPIX Changes since 1.1.1.2: +164 -41
lines
Import gnuplot 3.7.3
|
#ifndef lint
static char *RCSid = "$Id: set.c,v 1.21.2.7 2002/03/11 16:09:00 lhecking Exp $";
#endif
/* GNUPLOT - set.c */
/*[
* Copyright 1986 - 1993, 1998 Thomas Williams, Colin Kelley
*
* Permission to use, copy, and distribute this software and its
* documentation for any purpose with or without fee is hereby granted,
* provided that the above copyright notice appear in all copies and
* that both that copyright notice and this permission notice appear
* in supporting documentation.
*
* Permission to modify the software is granted, but not the right to
* distribute the complete modified source code. Modifications are to
* be distributed as patches to the released version. Permission to
* distribute binaries produced by compiling modified sources is granted,
* provided you
* 1. distribute the corresponding source modifications from the
* released version in the form of a patch file along with the binaries,
* 2. add special version identification to distinguish your version
* in addition to the base release version number,
* 3. provide your name and address as the primary contact for the
* support of your modified version, and
* 4. retain our contact information in regard to use of the base
* software.
* Permission to distribute the released version of the source code along
* with corresponding source modifications in the form of a patch file is
* granted with same provisions 2 through 4 for binary distributions.
*
* This software is provided "as is" without express or implied warranty
* to the extent permitted by applicable law.
]*/
/*
* 19 September 1992 Lawrence Crowl (crowl@cs.orst.edu)
* Added user-specified bases for log scaling.
*/
#include "plot.h"
#include "stdfn.h"
#include "setshow.h"
#include "national.h"
#include "alloc.h"
/*
* global variables to hold status of 'set' options
*
* IMPORTANT NOTE:
* ===============
* If you change the default values of one of the variables below, or if
* you add another global variable, make sure that the change you make is
* done in reset_command() as well (if that makes sense).
*/
TBOOLEAN autoscale_r = DTRUE;
TBOOLEAN autoscale_t = DTRUE;
TBOOLEAN autoscale_u = DTRUE;
TBOOLEAN autoscale_v = DTRUE;
TBOOLEAN autoscale_x = DTRUE;
TBOOLEAN autoscale_y = DTRUE;
TBOOLEAN autoscale_z = DTRUE;
TBOOLEAN autoscale_x2 = DTRUE;
TBOOLEAN autoscale_y2 = DTRUE;
TBOOLEAN autoscale_lt = DTRUE;
TBOOLEAN autoscale_lu = DTRUE;
TBOOLEAN autoscale_lv = DTRUE;
TBOOLEAN autoscale_lx = DTRUE;
TBOOLEAN autoscale_ly = DTRUE;
TBOOLEAN autoscale_lz = DTRUE;
TBOOLEAN multiplot = FALSE;
double boxwidth = -1.0; /* box width (automatic) */
TBOOLEAN clip_points = FALSE;
TBOOLEAN clip_lines1 = TRUE;
TBOOLEAN clip_lines2 = FALSE;
struct lp_style_type border_lp = { 0, -2, 0, 1.0, 1.0 };
int draw_border = 31;
TBOOLEAN draw_surface = TRUE;
char dummy_var[MAX_NUM_VAR][MAX_ID_LEN+1] = { "x", "y" };
char default_font[MAX_ID_LEN+1] = ""; /* Entry font added by DJL */
char xformat[MAX_ID_LEN+1] = DEF_FORMAT;
char yformat[MAX_ID_LEN+1] = DEF_FORMAT;
char zformat[MAX_ID_LEN+1] = DEF_FORMAT;
char x2format[MAX_ID_LEN+1] = DEF_FORMAT;
char y2format[MAX_ID_LEN+1] = DEF_FORMAT;
/* do formats look like times - use FIRST_X_AXIS etc as index
* - never saved or shown ...
*/
#if AXIS_ARRAY_SIZE != 10
# error error in initialiser for format_is_numeric
#endif
int format_is_numeric[AXIS_ARRAY_SIZE] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
enum PLOT_STYLE data_style = POINTSTYLE;
enum PLOT_STYLE func_style = LINES;
double bar_size = 1.0;
struct lp_style_type work_grid = { 0, GRID_OFF, 0, 1.0, 1.0 };
struct lp_style_type grid_lp = { 0, -1, 0, 1.0, 1.0 };
struct lp_style_type mgrid_lp = { 0, -1, 0, 1.0, 1.0 };
double polar_grid_angle = 0; /* nonzero means a polar grid */
int key = -1; /* default position */
struct position key_user_pos; /* user specified position for key */
TBOOLEAN key_reverse = FALSE; /* reverse text & sample ? */
struct lp_style_type key_box = { 0, -3, 0, 1.0, 1.0 }; /* -3 = no linetype */
double key_swidth = 4.0;
double key_vert_factor = 1.0;
double key_width_fix = 0.0;
TBOOLEAN is_log_x = FALSE;
TBOOLEAN is_log_y = FALSE;
TBOOLEAN is_log_z = FALSE;
TBOOLEAN is_log_x2 = FALSE;
TBOOLEAN is_log_y2 = FALSE;
double base_log_x = 0.0;
double base_log_y = 0.0;
double base_log_z = 0.0;
double base_log_x2 = 0.0;
double base_log_y2 = 0.0;
double log_base_log_x = 0.0;
double log_base_log_y = 0.0;
double log_base_log_z = 0.0;
double log_base_log_x2 = 0.0;
double log_base_log_y2 = 0.0;
FILE *gpoutfile;
char *outstr = NULL; /* means "STDOUT" */
TBOOLEAN parametric = FALSE;
double pointsize = 1.0;
int encoding;
char *encoding_names[] = { "default", "iso_8859_1", "cp437", "cp850", NULL };
TBOOLEAN polar = FALSE;
TBOOLEAN hidden3d = FALSE;
TBOOLEAN label_contours = TRUE; /* different linestyles are used for contours when set */
char contour_format[32] = "%8.3g"; /* format for contour key entries */
int angles_format = ANGLES_RADIANS;
double ang2rad = 1.0; /* 1 or pi/180, tracking angles_format */
int mapping3d = MAP3D_CARTESIAN;
int samples = SAMPLES; /* samples is always equal to samples_1 */
int samples_1 = SAMPLES;
int samples_2 = SAMPLES;
int iso_samples_1 = ISO_SAMPLES;
int iso_samples_2 = ISO_SAMPLES;
float xsize = 1.0; /* scale factor for size */
float ysize = 1.0; /* scale factor for size */
float zsize = 1.0; /* scale factor for size */
float xoffset = 0.0; /* x origin */
float yoffset = 0.0; /* y origin */
float aspect_ratio = 0.0; /* don't attempt to force it */
float surface_rot_z = 30.0; /* Default 3d transform. */
float surface_rot_x = 60.0;
float surface_scale = 1.0;
float surface_zscale = 1.0;
struct termentry *term = NULL; /* unknown */
char term_options[MAX_LINE_LEN+1] = "";
label_struct title = { "", 0.0, 0.0, "" };
label_struct timelabel = { "", 0.0, 0.0, "" };
label_struct xlabel = { "", 0.0, 0.0, "" };
label_struct ylabel = { "", 0.0, 0.0, "" };
label_struct zlabel = { "", 0.0, 0.0, "" };
label_struct x2label = { "", 0.0, 0.0, "" };
label_struct y2label = { "", 0.0, 0.0, "" };
int timelabel_rotate = FALSE;
int timelabel_bottom = TRUE;
char key_title[MAX_LINE_LEN+1] = "";
double rmin = -0.0;
double rmax = 10.0;
double tmin = -5.0;
double tmax = 5.0;
double umin = -5.0;
double umax = 5.0;
double vmin = -5.0;
double vmax = 5.0;
double xmin = -10.0;
double xmax = 10.0;
double ymin = -10.0;
double ymax = 10.0;
double zmin = -10.0;
double zmax = 10.0;
double x2min = -10.0;
double x2max = 10.0;
double y2min = -10.0;
double y2max = 10.0;
/* ULIG from plot.h: z y x t z2 y2 x2 r u v */
double writeback_min[AXIS_ARRAY_SIZE] = {-10.0, -10.0, -10.0, -5.0, -10.0, -10.0, -10.0, -0.0, -5.0, -5.0};
double writeback_max[AXIS_ARRAY_SIZE] = {+10.0, +10.0, +10.0, +5.0, +10.0, +10.0, +10.0, 10.0, +5.0, +5.0};
double loff = 0.0;
double roff = 0.0;
double toff = 0.0;
double boff = 0.0;
int draw_contour = CONTOUR_NONE;
int contour_pts = 5;
int contour_kind = CONTOUR_KIND_LINEAR;
int contour_order = 4;
int contour_levels = 5;
double zero = ZERO; /* zero threshold, not 0! */
int levels_kind = LEVELS_AUTO;
double *levels_list; /* storage for z levels to draw contours at */
int max_levels = 0; /* contour level capacity, before enlarging */
int dgrid3d_row_fineness = 10;
int dgrid3d_col_fineness = 10;
int dgrid3d_norm_value = 1;
TBOOLEAN dgrid3d = FALSE;
struct lp_style_type xzeroaxis = { 0, -3, 0, 1.0, 1.0 };
struct lp_style_type yzeroaxis = { 0, -3, 0, 1.0, 1.0 };
struct lp_style_type x2zeroaxis = { 0, -3, 0, 1.0, 1.0 };
struct lp_style_type y2zeroaxis = { 0, -3, 0, 1.0, 1.0 };
/* perhaps make these into an array one day */
int xtics = TICS_ON_BORDER | TICS_MIRROR;
int ytics = TICS_ON_BORDER | TICS_MIRROR;
int ztics = TICS_ON_BORDER; /* no mirror by default for ztics */
int x2tics = NO_TICS;
int y2tics = NO_TICS;
TBOOLEAN rotate_xtics = FALSE;
TBOOLEAN rotate_ytics = FALSE;
TBOOLEAN rotate_ztics = FALSE;
TBOOLEAN rotate_x2tics = FALSE;
TBOOLEAN rotate_y2tics = FALSE;
int range_flags[AXIS_ARRAY_SIZE]; /* = {0,0,...} */
int mxtics = MINI_DEFAULT;
int mytics = MINI_DEFAULT;
int mztics = MINI_DEFAULT;
int mx2tics = MINI_DEFAULT;
int my2tics = MINI_DEFAULT;
double mxtfreq = 10; /* # intervals between major */
double mytfreq = 10; /* tic marks */
double mztfreq = 10;
double mx2tfreq = 10;
double my2tfreq = 10;
double ticscale = 1.0; /* scale factor for tic mark */
double miniticscale = 0.5; /* and for minitics */
float ticslevel = 0.5;
struct ticdef xticdef = { TIC_COMPUTED };
struct ticdef yticdef = { TIC_COMPUTED };
struct ticdef zticdef = { TIC_COMPUTED };
struct ticdef x2ticdef = { TIC_COMPUTED };
struct ticdef y2ticdef = { TIC_COMPUTED };
TBOOLEAN tic_in = TRUE;
struct text_label *first_label = NULL;
struct arrow_def *first_arrow = NULL;
struct linestyle_def *first_linestyle = NULL;
int lmargin = -1; /* space between left edge and xleft in chars (-1: computed) */
int bmargin = -1; /* space between bottom and ybot in chars (-1: computed) */
int rmargin = -1; /* space between right egde and xright in chars (-1: computed) */
int tmargin = -1; /* space between top egde and ytop in chars (-1: computed) */
/* string representing missing values in ascii datafiles */
char *missing_val = NULL;
/* date&time language conversions */
/* extern struct dtconv *dtc; *//* HBB 980317: unused and not defined anywhere !? */
/*** other things we need *****/
/* input data, parsing variables */
extern TBOOLEAN is_3d_plot;
/* From plot2d.c */
extern struct curve_points *first_plot;
/* From plot3d.c */
extern struct surface_points *first_3dplot;
int key_hpos = TRIGHT; /* place for curve-labels, corner or outside */
int key_vpos = TTOP; /* place for curve-labels, corner or below */
int key_just = JRIGHT; /* alignment of key labels, left or right */
#ifndef TIMEFMT
#define TIMEFMT "%d/%m/%y\n%H:%M"
#endif
/* format for date/time for reading time in datafile */
char timefmt[25] = TIMEFMT;
/* array of datatypes (x in 0,y in 1,z in 2,..(rtuv)) */
/* not sure how rtuv come into it ?
* oh well, make first six compatible with FIRST_X_AXIS, etc
*/
int datatype[DATATYPE_ARRAY_SIZE];
char cur_locale[MAX_ID_LEN+1] = "C";
/* not set or shown directly, but controlled by 'set locale'
* defined in national.h
*/
char full_month_names[12][32] =
{ FMON01, FMON02, FMON03, FMON04, FMON05, FMON06, FMON07, FMON08, FMON09, FMON10, FMON11, FMON12 };
char abbrev_month_names[12][8] =
{ AMON01, AMON02, AMON03, AMON04, AMON05, AMON06, AMON07, AMON08, AMON09, AMON10, AMON11, AMON12 };
char full_day_names[7][32] =
{ FDAY0, FDAY1, FDAY2, FDAY3, FDAY4, FDAY5, FDAY6 };
char abbrev_day_names[7][8] =
{ ADAY0, ADAY1, ADAY2, ADAY3, ADAY4, ADAY5, ADAY6 };
/******** Local functions ********/
static void get_position __PROTO((struct position * pos));
static void get_position_type __PROTO((enum position_type * type, int *axes));
static void set_xyzlabel __PROTO((label_struct * label));
static void set_label __PROTO((void));
static void set_nolabel __PROTO((void));
static void set_arrow __PROTO((void));
static void set_noarrow __PROTO((void));
static void load_tics __PROTO((int axis, struct ticdef * tdef));
static void load_tic_user __PROTO((int axis, struct ticdef * tdef));
static void free_marklist __PROTO((struct ticmark * list));
static void load_tic_series __PROTO((int axis, struct ticdef * tdef));
static void load_offsets __PROTO((double *a, double *b, double *c, double *d));
static void delete_label __PROTO((struct text_label * prev, struct text_label * this));
static int assign_label_tag __PROTO((void));
static void delete_arrow __PROTO((struct arrow_def * prev, struct arrow_def * this));
static int assign_arrow_tag __PROTO((void));
static void set_linestyle __PROTO((void));
static void set_nolinestyle __PROTO((void));
static int assign_linestyle_tag __PROTO((void));
static void delete_linestyle __PROTO((struct linestyle_def * prev, struct linestyle_def * this));
static TBOOLEAN set_one __PROTO((void));
static TBOOLEAN set_two __PROTO((void));
static TBOOLEAN set_three __PROTO((void));
static int looks_like_numeric __PROTO((char *));
static void set_lp_properties __PROTO((struct lp_style_type * arg, int allow_points, int lt, int pt, double lw, double ps));
static void reset_lp_properties __PROTO((struct lp_style_type *arg));
static void set_locale __PROTO((char *));
static int set_tic_prop __PROTO((int *TICS, int *MTICS, double *FREQ,
struct ticdef * tdef, int AXIS, TBOOLEAN * ROTATE, char *tic_side));
/* following code segment appears over and over again */
#define GET_NUM_OR_TIME(store,axis) \
do{if ( datatype[axis] == TIME && isstring(c_token) ) { \
char ss[80]; struct tm tm; \
quote_str(ss,c_token, 80); ++c_token; \
if (gstrptime(ss,timefmt,&tm)) store = (double) gtimegm(&tm); else store = 0;\
} else {\
struct value value; \
store = real(const_express(&value));\
}}while(0)
/******** The 'reset' command ********/
void reset_command()
{
register struct curve_points *f_p = first_plot;
register struct surface_points *f_3dp = first_3dplot;
c_token++;
first_plot = NULL;
first_3dplot = NULL;
cp_free(f_p);
sp_free(f_3dp);
/* delete arrows */
while (first_arrow != NULL)
delete_arrow((struct arrow_def *) NULL, first_arrow);
/* delete labels */
while (first_label != NULL)
delete_label((struct text_label *) NULL, first_label);
/* delete linestyles */
while (first_linestyle != NULL)
delete_linestyle((struct linestyle_def *) NULL, first_linestyle);
strcpy(dummy_var[0], "x");
strcpy(dummy_var[1], "y");
strcpy(title.text, "");
strcpy(xlabel.text, "");
strcpy(ylabel.text, "");
strcpy(zlabel.text, "");
strcpy(x2label.text, "");
strcpy(y2label.text, "");
*title.font = 0;
*xlabel.font = 0;
*ylabel.font = 0;
*zlabel.font = 0;
*x2label.font = 0;
*y2label.font = 0;
strcpy(key_title, "");
strcpy(timefmt, TIMEFMT);
strcpy(xformat, DEF_FORMAT);
strcpy(yformat, DEF_FORMAT);
strcpy(zformat, DEF_FORMAT);
strcpy(x2format, DEF_FORMAT);
strcpy(y2format, DEF_FORMAT);
format_is_numeric[FIRST_X_AXIS] = format_is_numeric[SECOND_X_AXIS] = 1;
format_is_numeric[FIRST_Y_AXIS] = format_is_numeric[SECOND_Y_AXIS] = 1;
format_is_numeric[FIRST_Z_AXIS] = format_is_numeric[SECOND_Z_AXIS] = 1;
autoscale_r = DTRUE;
autoscale_t = DTRUE;
autoscale_u = DTRUE;
autoscale_v = DTRUE;
autoscale_x = DTRUE;
autoscale_y = DTRUE;
autoscale_z = DTRUE;
autoscale_x2 = DTRUE;
autoscale_y2 = DTRUE;
autoscale_lt = DTRUE;
autoscale_lu = DTRUE;
autoscale_lv = DTRUE;
autoscale_lx = DTRUE;
autoscale_ly = DTRUE;
autoscale_lz = DTRUE;
boxwidth = -1.0;
clip_points = FALSE;
clip_lines1 = TRUE;
clip_lines2 = FALSE;
set_lp_properties(&border_lp, 0, -2, 0, 1.0, 1.0);
draw_border = 31;
draw_surface = TRUE;
data_style = POINTSTYLE;
func_style = LINES;
bar_size = 1.0;
set_lp_properties(&work_grid, 0, GRID_OFF, 0, 0.5, 1.0);
set_lp_properties(&grid_lp, 0, -1, 0, 0.5, 1.0);
set_lp_properties(&mgrid_lp, 0, -1, 0, 0.5, 1.0);
polar_grid_angle = 0;
key = -1;
is_log_x = FALSE;
is_log_y = FALSE;
is_log_z = FALSE;
is_log_x2 = FALSE;
is_log_y2 = FALSE;
base_log_x = 0.0;
base_log_y = 0.0;
base_log_z = 0.0;
base_log_x2 = 0.0;
base_log_y2 = 0.0;
log_base_log_x = 0.0;
log_base_log_y = 0.0;
log_base_log_z = 0.0;
log_base_log_x2 = 0.0;
log_base_log_y2 = 0.0;
parametric = FALSE;
polar = FALSE;
hidden3d = FALSE;
label_contours = TRUE;
strcpy(contour_format, "%8.3g");
angles_format = ANGLES_RADIANS;
ang2rad = 1.0;
mapping3d = MAP3D_CARTESIAN;
samples = SAMPLES;
samples_1 = SAMPLES;
samples_2 = SAMPLES;
iso_samples_1 = ISO_SAMPLES;
iso_samples_2 = ISO_SAMPLES;
xsize = 1.0;
ysize = 1.0;
zsize = 1.0;
xoffset = 0.0;
yoffset = 0.0;
aspect_ratio = 0.0; /* dont force it */
surface_rot_z = 30.0;
surface_rot_x = 60.0;
surface_scale = 1.0;
surface_zscale = 1.0;
*timelabel.text = 0;
timelabel.xoffset = 0;
timelabel.yoffset = 0;
*timelabel.font = 0;
timelabel_rotate = FALSE;
timelabel_bottom = TRUE;
title.xoffset = 0;
title.yoffset = 0;
xlabel.xoffset = 0;
xlabel.yoffset = 0;
ylabel.xoffset = 0;
ylabel.yoffset = 0;
zlabel.xoffset = 0;
zlabel.yoffset = 0;
x2label.xoffset = 0;
x2label.yoffset = 0;
y2label.xoffset = 0;
y2label.yoffset = 0;
rmin = -0.0;
rmax = 10.0;
tmin = -5.0;
tmax = 5.0;
umin = -5.0;
umax = 5.0;
vmin = -5.0;
vmax = 5.0;
xmin = -10.0;
xmax = 10.0;
ymin = -10.0;
ymax = 10.0;
zmin = -10.0;
zmax = 10.0;
x2min = -10.0;
x2max = 10.0;
y2min = -10.0;
y2max = 10.0;
writeback_min[FIRST_Z_AXIS] = zmin; /* ULIG */
writeback_max[FIRST_Z_AXIS] = zmax;
writeback_min[FIRST_Y_AXIS] = ymin;
writeback_max[FIRST_Y_AXIS] = ymax;
writeback_min[FIRST_X_AXIS] = xmin;
writeback_max[FIRST_X_AXIS] = xmax;
writeback_min[SECOND_Z_AXIS] = zmin; /* no z2min (see plot.h) */
writeback_max[SECOND_Z_AXIS] = zmax; /* no z2max */
writeback_min[SECOND_Y_AXIS] = y2min;
writeback_max[SECOND_Y_AXIS] = y2max;
writeback_min[SECOND_X_AXIS] = x2min;
writeback_max[SECOND_X_AXIS] = x2max;
writeback_min[T_AXIS] = tmin;
writeback_max[T_AXIS] = tmax;
writeback_min[R_AXIS] = rmin;
writeback_max[R_AXIS] = rmax;
writeback_min[U_AXIS] = umin;
writeback_max[U_AXIS] = umax;
writeback_min[V_AXIS] = vmin;
writeback_max[V_AXIS] = vmax;
memset(range_flags, 0, sizeof(range_flags)); /* all = 0 */
loff = 0.0;
roff = 0.0;
toff = 0.0;
boff = 0.0;
draw_contour = CONTOUR_NONE;
contour_pts = 5;
contour_kind = CONTOUR_KIND_LINEAR;
contour_order = 4;
contour_levels = 5;
zero = ZERO;
levels_kind = LEVELS_AUTO;
dgrid3d_row_fineness = 10;
dgrid3d_col_fineness = 10;
dgrid3d_norm_value = 1;
dgrid3d = FALSE;
set_lp_properties(&xzeroaxis, 0, -3, 0, 1.0, 1.0);
set_lp_properties(&yzeroaxis, 0, -3, 0, 1.0, 1.0);
set_lp_properties(&x2zeroaxis, 0, -3, 0, 1.0, 1.0);
set_lp_properties(&y2zeroaxis, 0, -3, 0, 1.0, 1.0);
xtics =
ytics = TICS_ON_BORDER | TICS_MIRROR;
ztics = TICS_ON_BORDER; /* no mirror by default */
x2tics = NO_TICS;
y2tics = NO_TICS;
mxtics =
mytics =
mztics =
mx2tics =
my2tics = MINI_DEFAULT;
mxtfreq = 10.0;
mytfreq = 10.0;
mztfreq = 10.0;
mx2tfreq = 10.0;
my2tfreq = 10.0;
ticscale = 1.0;
miniticscale = 0.5;
ticslevel = 0.5;
xticdef.type = TIC_COMPUTED;
yticdef.type = TIC_COMPUTED;
zticdef.type = TIC_COMPUTED;
x2ticdef.type = TIC_COMPUTED;
y2ticdef.type = TIC_COMPUTED;
tic_in = TRUE;
lmargin =
bmargin =
rmargin =
tmargin = -1; /* autocomputed */
key_hpos = TRIGHT;
key_vpos = TTOP;
key_just = JRIGHT;
key_reverse = FALSE;
set_lp_properties(&key_box, 0, -3, 0, 1.0, 1.0);
key_swidth = 4;
key_vert_factor = 1;
key_width_fix = 0;
datatype[FIRST_X_AXIS] = FALSE;
datatype[FIRST_Y_AXIS] = FALSE;
datatype[FIRST_Z_AXIS] = FALSE;
datatype[SECOND_X_AXIS] = FALSE;
datatype[SECOND_Y_AXIS] = FALSE;
datatype[SECOND_Z_AXIS] = FALSE;
datatype[R_AXIS] = FALSE;
datatype[T_AXIS] = FALSE;
datatype[U_AXIS] = FALSE;
datatype[V_AXIS] = FALSE;
pointsize = 1.0;
encoding = ENCODING_DEFAULT;
set_locale("C"); /* default */
}
/******** The 'set' command ********/
void set_command()
{
static char GPFAR setmess[] = "\
valid set options: [] = choose one, {} means optional\n\n\
\t'angles', '{no}arrow', '{no}autoscale', 'bars', '{no}border',\n\
\t'boxwidth', '{no}clabel', '{no}clip', 'cntrparam', '{no}contour',\n\
\t'data style', '{no}dgrid3d', 'dummy', 'encoding', 'format',\n\
\t'function style', '{no}grid', '{no}hidden3d', 'isosamples',\n\
\t'{no}key', '{no}label', '{no}linestyle', 'locale', '{no}logscale',\n\
\t'[blrt]margin', 'mapping', 'missing', '{no}multiplot', 'offsets',\n\
\t'origin', 'output', '{no}parametric', 'pointsize', '{no}polar',\n\
\t'[rtuv]range', 'samples', 'size', '{no}surface', 'terminal',\n\
\t'tics', 'ticscale', 'ticslevel', '{no}timestamp', 'timefmt',\n\
\t'title', 'view', '[xyz]{2}data', '[xyz]{2}label', '[xyz]{2}range',\n\
\t'{no}{m}[xyz]{2}tics', '[xyz]{2}[md]tics', '{no}{[xyz]{2}}zeroaxis',\n\
\t'zero'";
c_token++;
if (!set_one() && !set_two() && !set_three())
int_error(setmess, c_token);
}
/* return TRUE if a command match, FALSE if not */
static TBOOLEAN
set_one()
{
/* save on replication with a macro */
#define PROCESS_AUTO_LETTER(AUTO, STRING,MIN,MAX) \
else if (equals(c_token, STRING)) { AUTO = DTRUE; ++c_token; } \
else if (almost_equals(c_token, MIN)) { AUTO |= 1; ++c_token; } \
else if (almost_equals(c_token, MAX)) { AUTO |= 2; ++c_token; }
if (max_levels == 0)
levels_list = (double *)gp_alloc((max_levels = 5)*sizeof(double),
"contour levels");
if (almost_equals(c_token, "ar$row")) {
c_token++;
set_arrow();
} else if (almost_equals(c_token, "noar$row")) {
c_token++;
set_noarrow();
} else if (almost_equals(c_token, "au$toscale")) {
c_token++;
if (END_OF_COMMAND) {
autoscale_r = autoscale_t = autoscale_x = autoscale_y = autoscale_z = autoscale_x2 = autoscale_y2 = DTRUE;
} else if (equals(c_token, "xy") || equals(c_token, "yx")) {
autoscale_x = autoscale_y = DTRUE;
c_token++;
}
PROCESS_AUTO_LETTER(autoscale_r, "r", "rmi$n", "rma$x")
PROCESS_AUTO_LETTER(autoscale_t, "t", "tmi$n", "tma$x")
PROCESS_AUTO_LETTER(autoscale_u, "u", "umi$n", "uma$x")
PROCESS_AUTO_LETTER(autoscale_v, "v", "vmi$n", "vma$x")
PROCESS_AUTO_LETTER(autoscale_x, "x", "xmi$n", "xma$x")
PROCESS_AUTO_LETTER(autoscale_y, "y", "ymi$n", "yma$x")
PROCESS_AUTO_LETTER(autoscale_z, "z", "zmi$n", "zma$x")
PROCESS_AUTO_LETTER(autoscale_x2, "x2", "x2mi$n", "x2ma$x")
PROCESS_AUTO_LETTER(autoscale_y2, "y2", "y2mi$n", "y2ma$x")
else
int_error("Invalid range", c_token);
} else if (almost_equals(c_token,"noau$toscale")) {
c_token++;
if (END_OF_COMMAND) {
autoscale_r = autoscale_t = autoscale_x = autoscale_y = autoscale_z = FALSE;
} else if (equals(c_token, "xy") || equals(c_token, "tyx")) {
autoscale_x = autoscale_y = FALSE;
c_token++;
} else if (equals(c_token, "r")) {
autoscale_r = FALSE;
c_token++;
} else if (equals(c_token, "t")) {
autoscale_t = FALSE;
c_token++;
} else if (equals(c_token, "u")) {
autoscale_u = FALSE;
c_token++;
} else if (equals(c_token, "v")) {
autoscale_v = FALSE;
c_token++;
} else if (equals(c_token, "x")) {
autoscale_x = FALSE;
c_token++;
} else if (equals(c_token, "y")) {
autoscale_y = FALSE;
c_token++;
} else if (equals(c_token, "x2")) {
autoscale_x2 = FALSE;
c_token++;
} else if (equals(c_token, "y2")) {
autoscale_y2 = FALSE;
c_token++;
} else if (equals(c_token, "z")) {
autoscale_z = FALSE;
c_token++;
}
} else if (almost_equals(c_token,"nobor$der")) {
draw_border = 0;
c_token++;
}
else if (almost_equals(c_token,"box$width")) {
struct value a;
c_token++;
if (END_OF_COMMAND)
boxwidth = -1.0;
else
/* if((boxwidth = real(const_express(&a))) != -2.0)*/
/* boxwidth = magnitude(const_express(&a));*/
boxwidth = real(const_express(&a));
} else if (almost_equals(c_token,"c$lip")) {
c_token++;
if (END_OF_COMMAND)
/* assuming same as points */
clip_points = TRUE;
else if (almost_equals(c_token, "p$oints"))
clip_points = TRUE;
else if (almost_equals(c_token, "o$ne"))
clip_lines1 = TRUE;
else if (almost_equals(c_token, "t$wo"))
clip_lines2 = TRUE;
else
int_error("expecting 'points', 'one', or 'two'", c_token);
c_token++;
} else if (almost_equals(c_token,"noc$lip")) {
c_token++;
if (END_OF_COMMAND) {
/* same as all three */
clip_points = FALSE;
clip_lines1 = FALSE;
clip_lines2 = FALSE;
} else if (almost_equals(c_token, "p$oints"))
clip_points = FALSE;
else if (almost_equals(c_token, "o$ne"))
clip_lines1 = FALSE;
else if (almost_equals(c_token, "t$wo"))
clip_lines2 = FALSE;
else
int_error("expecting 'points', 'one', or 'two'", c_token);
c_token++;
} else if (almost_equals(c_token,"hi$dden3d")) {
#ifdef LITE
printf(" Hidden Line Removal Not Supported in LITE version\n");
c_token++;
#else
/* HBB 970618: new parsing engine for hidden3d options */
set_hidden3doptions();
hidden3d = TRUE;
#endif /* LITE */
} else if (almost_equals(c_token,"nohi$dden3d")) {
#ifdef LITE
printf(" Hidden Line Removal Not Supported in LITE version\n");
#else
hidden3d = FALSE;
#endif /* LITE */
c_token++;
} else if (almost_equals(c_token,"cla$bel")) {
label_contours = TRUE;
c_token++;
if (isstring(c_token))
quote_str(contour_format, c_token++, 30);
} else if (almost_equals(c_token,"nocla$bel")) {
label_contours = FALSE;
c_token++;
} else if (almost_equals(c_token,"ma$pping3d")) {
c_token++;
if (END_OF_COMMAND)
/* assuming same as points */
mapping3d = MAP3D_CARTESIAN;
else if (almost_equals(c_token, "ca$rtesian"))
mapping3d = MAP3D_CARTESIAN;
else if (almost_equals(c_token, "s$pherical"))
mapping3d = MAP3D_SPHERICAL;
else if (almost_equals(c_token, "cy$lindrical"))
mapping3d = MAP3D_CYLINDRICAL;
else
int_error("expecting 'cartesian', 'spherical', or 'cylindrical'", c_token);
c_token++;
} else if (almost_equals(c_token,"co$ntour")) {
c_token++;
if (END_OF_COMMAND)
/* assuming same as points */
draw_contour = CONTOUR_BASE;
else {
if (almost_equals(c_token, "ba$se"))
draw_contour = CONTOUR_BASE;
else if (almost_equals(c_token, "s$urface"))
draw_contour = CONTOUR_SRF;
else if (almost_equals(c_token, "bo$th"))
draw_contour = CONTOUR_BOTH;
else
int_error("expecting 'base', 'surface', or 'both'", c_token);
c_token++;
}
} else if (almost_equals(c_token,"noco$ntour")) {
c_token++;
draw_contour = CONTOUR_NONE;
} else if (almost_equals(c_token,"cntrp$aram")) {
struct value a;
c_token++;
if (END_OF_COMMAND) {
/* assuming same as defaults */
contour_pts = 5;
contour_kind = CONTOUR_KIND_LINEAR;
contour_order = 4;
contour_levels = 5;
levels_kind = LEVELS_AUTO;
} else if (almost_equals(c_token, "p$oints")) {
c_token++;
contour_pts = (int) real(const_express(&a));
} else if (almost_equals(c_token, "li$near")) {
c_token++;
contour_kind = CONTOUR_KIND_LINEAR;
} else if (almost_equals(c_token, "c$ubicspline")) {
c_token++;
contour_kind = CONTOUR_KIND_CUBIC_SPL;
} else if (almost_equals(c_token, "b$spline")) {
c_token++;
contour_kind = CONTOUR_KIND_BSPLINE;
} else if (almost_equals(c_token, "le$vels")) {
int i = 0; /* local counter */
c_token++;
/* RKC: I have modified the next two:
* to use commas to separate list elements as in xtics
* so that incremental lists start,incr[,end]as in "
*/
if (almost_equals(c_token, "di$screte")) {
levels_kind = LEVELS_DISCRETE;
c_token++;
if(END_OF_COMMAND)
int_error("expecting discrete level", c_token);
else
levels_list[i++] = real(const_express(&a));
while(!END_OF_COMMAND) {
if (!equals(c_token, ","))
int_error("expecting comma to separate discrete levels", c_token);
c_token++;
if (i == max_levels)
levels_list = gp_realloc(levels_list,
(max_levels += 10)*sizeof(double),
"contour levels");
levels_list[i++] = real(const_express(&a));
}
contour_levels = i;
} else if (almost_equals(c_token, "in$cremental")) {
levels_kind = LEVELS_INCREMENTAL;
c_token++;
levels_list[i++] = real(const_express(&a));
if (!equals(c_token, ","))
int_error("expecting comma to separate start,incr levels", c_token);
c_token++;
if((levels_list[i++] = real(const_express(&a))) == 0)
int_error("increment cannot be 0", c_token);
if(!END_OF_COMMAND) {
if (!equals(c_token, ","))
int_error("expecting comma to separate incr,stop levels", c_token);
c_token++;
/* need to round up, since 10,10,50 is 5 levels, not four,
* but 10,10,49 is four
*/
contour_levels = (int) ( (real(const_express(&a))-levels_list[0])/levels_list[1] + 1.0);
}
} else if (almost_equals(c_token, "au$to")) {
levels_kind = LEVELS_AUTO;
c_token++;
if(!END_OF_COMMAND)
contour_levels = (int) real(const_express(&a));
} else {
if(levels_kind == LEVELS_DISCRETE)
int_error("Levels type is discrete, ignoring new number of contour levels", c_token);
contour_levels = (int) real(const_express(&a));
}
} else if (almost_equals(c_token, "o$rder")) {
int order;
c_token++;
order = (int) real(const_express(&a));
if ( order < 2 || order > 10 )
int_error("bspline order must be in [2..10] range.", c_token);
contour_order = order;
} else
int_error("expecting 'linear', 'cubicspline', 'bspline', 'points', 'levels' or 'order'", c_token);
} else if (almost_equals(c_token,"da$ta")) {
c_token++;
if (!almost_equals(c_token,"s$tyle"))
int_error("expecting keyword 'style'",c_token);
data_style = get_style();
} else if (almost_equals(c_token,"dg$rid3d")) {
int i;
TBOOLEAN was_comma = TRUE;
int local_vals[3];
struct value a;
local_vals[0] = dgrid3d_row_fineness;
local_vals[1] = dgrid3d_col_fineness;
local_vals[2] = dgrid3d_norm_value;
c_token++;
for (i = 0; i < 3 && !(END_OF_COMMAND);) {
if (equals(c_token,",")) {
if (was_comma) i++;
was_comma = TRUE;
c_token++;
} else {
if (!was_comma)
int_error("',' expected",c_token);
local_vals[i] = real(const_express(&a));
i++;
was_comma = FALSE;
}
}
if (local_vals[0] < 2 || local_vals[0] > 1000)
int_error("Row size must be in [2:1000] range; size unchanged",
c_token);
if (local_vals[1] < 2 || local_vals[1] > 1000)
int_error("Col size must be in [2:1000] range; size unchanged",
c_token);
if (local_vals[2] < 1 || local_vals[2] > 100)
int_error("Norm must be in [1:100] range; norm unchanged", c_token);
dgrid3d_row_fineness = local_vals[0];
dgrid3d_col_fineness = local_vals[1];
dgrid3d_norm_value = local_vals[2];
dgrid3d = TRUE;
} else if (almost_equals(c_token,"nodg$rid3d")) {
c_token++;
dgrid3d = FALSE;
} else if (almost_equals(c_token,"mis$sing")) {
c_token++;
if (END_OF_COMMAND) {
if (missing_val)
free(missing_val);
missing_val = NULL;
} else {
if (!isstring(c_token))
int_error("Expected missing-value string", c_token);
m_quote_capture(&missing_val, c_token, c_token);
c_token++;
}
} else if (almost_equals(c_token,"nomis$sing")) {
++c_token;
if (missing_val)
free(missing_val);
missing_val = NULL;
} else if (almost_equals(c_token,"du$mmy")) {
c_token++;
if (END_OF_COMMAND)
int_error("expecting dummy variable name", c_token);
else {
if (!equals(c_token,","))
copy_str(dummy_var[0],c_token++, MAX_ID_LEN);
if (!END_OF_COMMAND && equals(c_token,",")) {
c_token++;
if (END_OF_COMMAND)
int_error("expecting second dummy variable name", c_token);
copy_str(dummy_var[1],c_token++, MAX_ID_LEN);
}
}
} else if (almost_equals(c_token,"fo$rmat")) {
TBOOLEAN setx = FALSE, sety = FALSE, setz = FALSE;
TBOOLEAN setx2 = FALSE, sety2 = FALSE;
c_token++;
if (equals(c_token,"x")) {
setx = TRUE;
c_token++;
} else if (equals(c_token,"y")) {
sety = TRUE;
c_token++;
} else if (equals(c_token,"x2")) {
setx2 = TRUE;
c_token++;
} else if (equals(c_token,"y2")) {
sety2 = TRUE;
c_token++;
} else if (equals(c_token,"z")) {
setz = TRUE;
c_token++;
} else if (equals(c_token,"xy") || equals(c_token,"yx")) {
setx = sety = TRUE;
c_token++;
} else if (isstring(c_token) || END_OF_COMMAND) {
/* Assume he wants all */
setx = sety = setz = setx2 = sety2 = TRUE;
}
if (END_OF_COMMAND) {
if (setx) {
(void) strcpy(xformat,DEF_FORMAT);
format_is_numeric[FIRST_X_AXIS] = 1;
}
if (sety) {
(void) strcpy(yformat,DEF_FORMAT);
format_is_numeric[FIRST_Y_AXIS] = 1;
}
if (setz) {
(void) strcpy(zformat,DEF_FORMAT);
format_is_numeric[FIRST_Z_AXIS] = 1;
}
if (setx2) {
(void) strcpy(x2format,DEF_FORMAT);
format_is_numeric[SECOND_X_AXIS] = 1;
}
if (sety2) {
(void) strcpy(y2format,DEF_FORMAT);
format_is_numeric[SECOND_Y_AXIS] = 1;
}
} else {
if (!isstring(c_token))
int_error("expecting format string",c_token);
else {
if (setx) {
quote_str(xformat,c_token, MAX_ID_LEN);
format_is_numeric[FIRST_X_AXIS] = looks_like_numeric(xformat);
}
if (sety) {
quote_str(yformat,c_token, MAX_ID_LEN);
format_is_numeric[FIRST_Y_AXIS] = looks_like_numeric(yformat);
}
if (setz) {
quote_str(zformat,c_token, MAX_ID_LEN);
format_is_numeric[FIRST_Z_AXIS] =looks_like_numeric(zformat);
}
if (setx2) {
quote_str(x2format,c_token, MAX_ID_LEN);
format_is_numeric[SECOND_X_AXIS] = looks_like_numeric(x2format);
}
if (sety2) {
quote_str(y2format,c_token, MAX_ID_LEN);
format_is_numeric[SECOND_Y_AXIS] = looks_like_numeric(y2format);
}
c_token++;
}
}
} else if (almost_equals(c_token,"fu$nction")) {
c_token++;
if (!almost_equals(c_token,"s$tyle"))
int_error("expecting keyword 'style'",c_token);
func_style = get_style();
} else if (almost_equals(c_token,"la$bel")) {
c_token++;
set_label();
} else if (almost_equals(c_token,"nola$bel")) {
c_token++;
set_nolabel();
} else if (almost_equals(c_token,"li$nestyle") || equals(c_token, "ls" )) {
c_token++;
set_linestyle();
} else if (almost_equals(c_token,"noli$nestyle") || equals(c_token, "nols" )) {
c_token++;
set_nolinestyle();
} else if (almost_equals(c_token,"lo$gscale")) {
c_token++;
if (END_OF_COMMAND) {
is_log_x = is_log_y = is_log_z = is_log_x2 = is_log_y2 = TRUE;
base_log_x = base_log_y = base_log_z = base_log_x2 = base_log_y2 = 10.0;
log_base_log_x = log_base_log_y = log_base_log_z = log_base_log_x2 = log_base_log_y2 = M_LN10;
} else {
TBOOLEAN change_x = FALSE;
TBOOLEAN change_y = FALSE;
TBOOLEAN change_z = FALSE;
TBOOLEAN change_x2 = FALSE;
TBOOLEAN change_y2 = FALSE;
double newbase = 10, log_newbase;
if (equals(c_token, "x2"))
change_x2 = TRUE;
else if (equals(c_token, "y2"))
change_y2 = TRUE;
else { /* must not see x when x2, etc */
if (chr_in_str(c_token, 'x'))
change_x = TRUE;
if (chr_in_str(c_token, 'y'))
change_y = TRUE;
if (chr_in_str(c_token, 'z'))
change_z = TRUE;
}
c_token++;
if (!END_OF_COMMAND) {
struct value a;
newbase = magnitude(const_express(&a));
if (newbase < 1.1)
int_error("log base must be >= 1.1; logscale unchanged",
c_token);
}
log_newbase = log(newbase);
if (change_x) {
is_log_x = TRUE;
base_log_x = newbase;
log_base_log_x = log_newbase;
}
if (change_y) {
is_log_y = TRUE;
base_log_y = newbase;
log_base_log_y = log_newbase;
}
if (change_z) {
is_log_z = TRUE;
base_log_z = newbase;
log_base_log_z = log_newbase;
}
if (change_x2) {
is_log_x2 = TRUE;
base_log_x2 = newbase;
log_base_log_x2 = log_newbase;
}
if (change_y2) {
is_log_y2 = TRUE;
base_log_y2 = newbase;
log_base_log_y2 = log_newbase;
}
}
} else if (almost_equals(c_token,"nolo$gscale")) {
c_token++;
if (END_OF_COMMAND) {
is_log_x = is_log_y = is_log_z = is_log_x2 = is_log_y2 = FALSE;
} else if (equals(c_token, "x2")) {
is_log_x2 = FALSE; ++c_token;
} else if (equals(c_token, "y2")) {
is_log_y2 = FALSE; ++c_token;
} else {
if (chr_in_str(c_token, 'x')) {
is_log_x = FALSE;
base_log_x = 0.0;
log_base_log_x = 0.0;
}
if (chr_in_str(c_token, 'y')) {
is_log_y = FALSE;
base_log_y = 0.0;
log_base_log_y = 0.0;
}
if (chr_in_str(c_token, 'z')) {
is_log_z = FALSE;
base_log_z = 0.0;
log_base_log_z = 0.0;
}
c_token++;
}
} else if (almost_equals(c_token,"of$fsets")) {
c_token++;
if (END_OF_COMMAND) {
loff = roff = toff = boff = 0.0; /* Reset offsets */
} else {
load_offsets (&loff,&roff,&toff,&boff);
}
} else if (almost_equals(c_token, "noof$fsets")) {
loff = roff = toff = boff = 0.0;
++c_token;
} else if(almost_equals(c_token,"b$ars")) {
c_token++;
if(END_OF_COMMAND) {
bar_size = 1.0;
} else if(almost_equals(c_token,"s$mall")) {
bar_size = 0.0;
++c_token;
} else if(almost_equals(c_token,"l$arge")) {
bar_size = 1.0;
++c_token;
} else {
struct value a;
bar_size = real(const_express(&a));
}
} else if (almost_equals(c_token, "nob$ars")) {
++c_token;
bar_size = 0.0;
} else if (almost_equals(c_token, "enco$ding")) {
c_token++;
if(END_OF_COMMAND) {
encoding = ENCODING_DEFAULT;
} else if (almost_equals(c_token,"def$ault")) {
c_token++;
encoding = ENCODING_DEFAULT;
} else if (almost_equals(c_token,"iso$_8859_1")) {
c_token++;
encoding = ENCODING_ISO_8859_1;
} else if (almost_equals(c_token,"cp4$37")) {
c_token++;
encoding = ENCODING_CP_437;
} else if (almost_equals(c_token,"cp8$50")) {
c_token++;
encoding = ENCODING_CP_850;
} else {
int_error("expecting one of 'default', 'iso_8859_1', 'cp437' or 'cp850'", c_token);
}
} else
return(FALSE); /* no command match */
return(TRUE);
}
/* return TRUE if a command match, FALSE if not */
static TBOOLEAN
set_two()
{
if (almost_equals(c_token,"o$utput")) {
if (multiplot) {
int_error("you can't change the output in multiplot mode", c_token);
}
c_token++;
if (END_OF_COMMAND) { /* no file specified */
term_set_output(NULL);
if (outstr) {
free(outstr);
outstr = NULL; /* means STDOUT */
}
} else if (!isstring(c_token)) {
int_error("expecting filename",c_token);
} else {
/* on int_error, we'd like to remember that this is allocated */
static char *testfile = NULL;
m_quote_capture(&testfile,c_token, c_token); /* reallocs store */
/* Skip leading whitespace */
while (isspace((int)*testfile))
testfile++;
++c_token;
term_set_output(testfile);
/* if we get here then it worked, and outstr now = testfile */
testfile = NULL;
}
} else if (almost_equals(c_token,"origin")) {
struct value s;
c_token++;
if (END_OF_COMMAND) {
xoffset = 0.0;
yoffset = 0.0;
} else {
xoffset = real(const_express(&s));
if (!equals(c_token,","))
int_error("',' expected",c_token);
c_token++;
yoffset = real(const_express(&s));
}
} else if (almost_equals(c_token,"tit$le")) {
set_xyzlabel(&title);
} else if (almost_equals(c_token,"xl$abel")) {
set_xyzlabel(&xlabel);
} else if (almost_equals(c_token,"yl$abel")) {
set_xyzlabel(&ylabel);
} else if (almost_equals(c_token,"zl$abel")) {
set_xyzlabel(&zlabel);
} else if (almost_equals(c_token,"x2l$abel")) {
set_xyzlabel(&x2label);
} else if (almost_equals(c_token,"y2l$abel")) {
set_xyzlabel(&y2label);
} else if (almost_equals(c_token,"keyt$itle")) {
c_token++;
if (END_OF_COMMAND) { /* set to default */
key_title[0] = NUL;
} else {
if (isstring(c_token)) {
/* We have string specified - grab it. */
quote_str(key_title,c_token, MAX_LINE_LEN);
c_token++;
}
/* c_token++; */
}
} else if (almost_equals(c_token, "nokeyt$itle")) {
++c_token;
*key_title = 0;
} else if (almost_equals(c_token,"timef$mt")) {
c_token++;
if (END_OF_COMMAND) { /* set to default */
strcpy(timefmt,TIMEFMT);
} else {
if (isstring(c_token)) {
/* We have string specified - grab it. */
quote_str(timefmt,c_token, 25);
}
c_token++;
}
} else if (almost_equals(c_token,"loc$ale")) {
c_token++;
if (END_OF_COMMAND) {
set_locale("C");
} else if (isstring(c_token)) {
char ss[MAX_ID_LEN+1];
quote_str(ss,c_token,MAX_ID_LEN);
set_locale(ss);
++c_token;
} else {
int_error("Expected string", c_token);
}
}
#define DO_ZEROAX(variable, string,neg) \
else if (almost_equals(c_token, string)) { \
++c_token; if (END_OF_COMMAND) variable.l_type = -1; \
else { \
struct value a; \
int old_token = c_token;\
LP_PARSE(variable,1,0,-1,0); \
if (old_token == c_token) \
variable.l_type = real(const_express(&a)) - 1; \
}\
} else if (almost_equals(c_token, neg)) { \
++c_token; variable.l_type = -3; \
}
DO_ZEROAX(xzeroaxis, "xzero$axis", "noxzero$axis")
DO_ZEROAX(yzeroaxis, "yzero$axis", "noyzero$axis")
DO_ZEROAX(x2zeroaxis, "x2zero$axis", "nox2zero$axis")
DO_ZEROAX(y2zeroaxis, "y2zero$axis", "noy2zero$axis")
else if (almost_equals(c_token,"zeroa$xis")) {
c_token++;
LP_PARSE(xzeroaxis,1,0,-1,0);
memcpy(&yzeroaxis,&xzeroaxis,sizeof(struct lp_style_type));
} else if (almost_equals(c_token,"nozero$axis")) {
c_token++;
xzeroaxis.l_type = -3;
yzeroaxis.l_type = -3;
x2zeroaxis.l_type = -3;
y2zeroaxis.l_type = -3;
} else if (almost_equals(c_token,"par$ametric")) {
if (!parametric) {
parametric = TRUE;
if (!polar) { /* already done for polar */
strcpy (dummy_var[0], "t");
strcpy (dummy_var[1], "y");
if (interactive)
(void) fprintf(stderr,"\n\tdummy variable is t for curves, u/v for surfaces\n");
}
}
c_token++;
} else if (almost_equals(c_token,"nopar$ametric")) {
if (parametric) {
parametric = FALSE;
if (!polar) { /* keep t for polar */
strcpy (dummy_var[0], "x");
strcpy (dummy_var[1], "y");
if (interactive)
(void) fprintf(stderr,"\n\tdummy variable is x for curves, x/y for surfaces\n");
}
}
c_token++;
} else if (almost_equals(c_token, "poi$ntsize")) {
struct value a;
c_token++;
if (END_OF_COMMAND)
pointsize = 1.0;
else
pointsize = real(const_express(&a));
if(pointsize <= 0) pointsize = 1;
} else if (almost_equals(c_token,"pol$ar")) {
if (!polar) {
if (!parametric) {
if (interactive)
(void) fprintf(stderr,"\n\tdummy variable is t for curves\n");
strcpy (dummy_var[0], "t");
}
polar = TRUE;
if (autoscale_t) {
/* only if user has not set a range manually */
tmin = 0.0;
tmax = 2 * M_PI / ang2rad; /* 360 if degrees, 2pi if radians */
}
}
c_token++;
} else if (almost_equals(c_token,"nopo$lar")) {
if (polar) {
polar = FALSE;
if (parametric && autoscale_t) {
/* only if user has not set an explicit range */
tmin = -5.0;
tmax = 5.0;
}
if (!parametric) {
strcpy (dummy_var[0], "x");
if (interactive)
(void) fprintf(stderr,"\n\tdummy variable is x for curves\n");
}
}
c_token++;
} else if (almost_equals(c_token,"an$gles")) {
c_token++;
if (END_OF_COMMAND) {
/* assuming same as defaults */
angles_format = ANGLES_RADIANS;
ang2rad = 1;
} else if (almost_equals(c_token, "r$adians")) {
angles_format = ANGLES_RADIANS;
c_token++;
ang2rad = 1;
} else if (almost_equals(c_token, "d$egrees")) {
angles_format = ANGLES_DEGREES;
c_token++;
ang2rad = DEG2RAD;
} else
int_error("expecting 'radians' or 'degrees'", c_token);
if (polar && autoscale_t) {
/* set trange if in polar mode and no explicit range */
tmin = 0;
tmax = 2 * M_PI / ang2rad;
}
}
#define GRID_MATCH(string, neg, mask) \
if (almost_equals(c_token, string)) { work_grid.l_type |= mask; ++c_token; } \
else if (almost_equals(c_token, neg)) { work_grid.l_type &= ~(mask); ++c_token; }
else if (almost_equals(c_token,"g$rid")) {
c_token++;
if (END_OF_COMMAND && !work_grid.l_type)
work_grid.l_type = GRID_X|GRID_Y;
else
while (!END_OF_COMMAND) {
GRID_MATCH("x$tics", "nox$tics", GRID_X)
else GRID_MATCH("y$tics", "noy$tics", GRID_Y)
else GRID_MATCH("z$tics", "noz$tics", GRID_Z)
else GRID_MATCH("x2$tics", "nox2$tics", GRID_X2)
else GRID_MATCH("y2$tics", "noy2$tics", GRID_Y2)
else GRID_MATCH("mx$tics", "nomx$tics", GRID_MX)
else GRID_MATCH("my$tics", "nomy$tics", GRID_MY)
else GRID_MATCH("mz$tics", "nomz$tics", GRID_MZ)
else GRID_MATCH("mx2$tics", "nomx2$tics", GRID_MX2)
else GRID_MATCH("my2$tics", "nomy2$tics", GRID_MY2)
else if (almost_equals(c_token,"po$lar")) {
if (!work_grid.l_type)
work_grid.l_type = GRID_X;
c_token++;
if (END_OF_COMMAND) {
polar_grid_angle = 30*DEG2RAD;
} else {
/* get radial interval */
struct value a;
polar_grid_angle = ang2rad*real(const_express(&a));
}
} else if (almost_equals(c_token,"nopo$lar")) {
polar_grid_angle = 0; /* not polar grid */
c_token++;
} else
break; /* might be a linetype */
}
if (!END_OF_COMMAND) {
struct value a;
int old_token = c_token;
LP_PARSE(grid_lp,1,0,-1,1);
if (c_token == old_token) { /* nothing parseable found... */
grid_lp.l_type = real(const_express(&a)) - 1;
}
if (!work_grid.l_type)
work_grid.l_type = GRID_X|GRID_Y;
/* probably just set grid <linetype> */
if (END_OF_COMMAND) {
memcpy(&mgrid_lp,&grid_lp,sizeof(struct lp_style_type));
} else {
if (equals(c_token,","))
c_token++;
old_token = c_token;
LP_PARSE(mgrid_lp,1,0,-1,1);
if (c_token == old_token) {
mgrid_lp.l_type = real(const_express(&a)) -1;
}
}
if (!work_grid.l_type)
work_grid.l_type = GRID_X|GRID_Y;
/* probably just set grid <linetype> */
}
} else if (almost_equals(c_token,"nog$rid")) {
work_grid.l_type = GRID_OFF;
c_token++;
} else if (almost_equals(c_token,"su$rface")) {
draw_surface = TRUE;
c_token++;
} else if (almost_equals(c_token,"nosu$rface")) {
draw_surface = FALSE;
c_token++;
} else if (almost_equals(c_token,"bor$der")) {
struct value a;
c_token++;
if(END_OF_COMMAND){
draw_border = 31;
} else {
draw_border = (int)real(const_express(&a));
}
/* HBB 980609: add linestyle handling for 'set border...' */
/* For now, you have to give a border bitpattern to be able to specify a linestyle. Sorry for this,
* but the gnuplot parser really is too messy for any other solution, currently */
if(END_OF_COMMAND) {
set_lp_properties(&border_lp, 0, -2, 0, 1.0, 1.0);
} else {
LP_PARSE(border_lp, 1, 0, -2, 0);
}
} else if (almost_equals(c_token,"k$ey")) {
struct value a;
c_token++;
if (END_OF_COMMAND) {
key = -1;
key_vpos = TTOP;
key_hpos = TRIGHT;
key_just = JRIGHT;
key_reverse = FALSE;
set_lp_properties(&key_box,0,-3,0,1.0,1.0);
key_swidth = 4;
key_vert_factor = 1;
key_width_fix = 0;
key_title[0] = 0;
} else {
while (!END_OF_COMMAND) {
if (almost_equals(c_token,"t$op")) {
key_vpos = TTOP;
key = -1;
} else if (almost_equals(c_token,"b$ottom")) {
key_vpos = TBOTTOM;
key = -1;
} else if (almost_equals(c_token,"l$eft")) {
key_hpos = TLEFT;
/* key_just = TRIGHT; */
key = -1;
} else if (almost_equals(c_token,"r$ight")) {
key_hpos = TRIGHT;
key = -1;
} else if (almost_equals(c_token,"u$nder") ||
almost_equals(c_token,"be$low")) {
key_vpos = TUNDER;
if (key_hpos == TOUT)
key_hpos--;
key = -1;
} else if (almost_equals(c_token,"o$utside")) {
key_hpos = TOUT;
if (key_vpos == TUNDER)
key_vpos--;
key = -1;
} else if (almost_equals(c_token,"L$eft")) {
/* key_hpos = TLEFT; */
key_just = JLEFT;
/* key = -1; */
} else if (almost_equals(c_token,"R$ight")) {
/* key_hpos = TLEFT; */
key_just = JRIGHT;
/* key = -1; */
} else if (almost_equals(c_token,"rev$erse")) {
key_reverse = TRUE;
} else if (almost_equals(c_token,"norev$erse")) {
key_reverse = FALSE;
} else if (equals(c_token,"box")) {
++c_token;
if (END_OF_COMMAND)
key_box.l_type = -2;
else {
int old_token = c_token;
LP_PARSE(key_box,1,0,-2,0);
if (old_token == c_token) {
key_box.l_type = real(const_express(&a)) -1;
}
}
--c_token; /* is incremented after loop */
} else if (almost_equals(c_token,"nob$ox")) {
key_box.l_type = -3;
} else if (almost_equals(c_token, "sa$mplen")) {
++c_token;
key_swidth = real(const_express(&a));
--c_token; /* it is incremented after loop */
} else if (almost_equals(c_token, "sp$acing")) {
++c_token;
key_vert_factor = real(const_express(&a));
if (key_vert_factor < 0.0)
key_vert_factor = 0.0;
--c_token; /* it is incremented after loop */
} else if (almost_equals(c_token, "w$idth")) {
++c_token;
key_width_fix = real(const_express(&a));
--c_token; /* it is incremented after loop */
} else if (almost_equals(c_token,"ti$tle")) {
if (isstring(c_token+1)) {
/* We have string specified - grab it. */
quote_str(key_title,++c_token, MAX_LINE_LEN);
}
else
key_title[0] = 0;
} else {
get_position(&key_user_pos);
key = 1;
--c_token; /* will be incremented again soon */
}
c_token++;
}
}
} else if (almost_equals(c_token,"nok$ey")) {
key = 0;
c_token++;
} else if (almost_equals(c_token,"tic$s")) {
tic_in = TRUE;
c_token++;
if (almost_equals(c_token,"i$n")) {
tic_in = TRUE;
c_token++;
} else if (almost_equals(c_token,"o$ut")) {
tic_in = FALSE;
c_token++;
}
} else if (almost_equals(c_token,"xda$ta")) {
c_token++;
if(END_OF_COMMAND) {
datatype[FIRST_X_AXIS] = FALSE;
/* eh ? - t and u have nothing to do with x */
datatype[T_AXIS] = FALSE;
datatype[U_AXIS] = FALSE;
} else {
if (almost_equals(c_token,"t$ime")) {
datatype[FIRST_X_AXIS] = TIME;
datatype[T_AXIS] = TIME;
datatype[U_AXIS] = TIME;
} else {
datatype[FIRST_X_AXIS] = FALSE;
datatype[T_AXIS] = FALSE;
datatype[U_AXIS] = FALSE;
}
c_token++;
}
} else if (almost_equals(c_token,"yda$ta")) {
c_token++;
if(END_OF_COMMAND) {
datatype[FIRST_Y_AXIS] = FALSE;
datatype[V_AXIS] = FALSE;
} else {
if (almost_equals(c_token,"t$ime")) {
datatype[FIRST_Y_AXIS] = TIME;
datatype[V_AXIS] = TIME;
} else {
datatype[FIRST_Y_AXIS] = FALSE;
datatype[V_AXIS] = FALSE;
}
c_token++;
}
} else if (almost_equals(c_token,"zda$ta")) {
c_token++;
if(END_OF_COMMAND) {
datatype[FIRST_Z_AXIS] = FALSE;
} else {
if (almost_equals(c_token,"t$ime")) {
datatype[FIRST_Z_AXIS] = TIME;
} else {
datatype[FIRST_Z_AXIS] = FALSE;
}
c_token++;
}
} else if (almost_equals(c_token,"x2da$ta")) {
c_token++;
if(END_OF_COMMAND) {
datatype[SECOND_X_AXIS] = FALSE;
} else {
if (almost_equals(c_token,"t$ime")) {
datatype[SECOND_X_AXIS] = TIME;
} else {
datatype[SECOND_X_AXIS] = FALSE;
}
c_token++;
}
} else if (almost_equals(c_token,"y2da$ta")) {
c_token++;
if(END_OF_COMMAND) {
datatype[SECOND_Y_AXIS] = FALSE;
} else {
if (almost_equals(c_token,"t$ime")) {
datatype[SECOND_Y_AXIS] = TIME;
} else {
datatype[SECOND_Y_AXIS] = FALSE;
}
c_token++;
}
}
/* to save duplicating code for x/y/z/x2/y2, make a macro
* (should perhaps be a function ?)
* unfortunately, string concatenation is not supported on all compilers,
* so we have to explicitly include both 'on' and 'no' strings in
* the args
*/
/* change to a function: lph 25.09.1998 */
#define PROCESS_TIC_COMMANDS set_tic_prop
else if
(PROCESS_TIC_COMMANDS(&x2tics, &mx2tics, &mx2tfreq, &x2ticdef,
SECOND_X_AXIS, &rotate_x2tics, "x2") );
else if
(PROCESS_TIC_COMMANDS(&y2tics, &my2tics, &my2tfreq, &y2ticdef,
SECOND_Y_AXIS, &rotate_y2tics, "y2") );
else if
(PROCESS_TIC_COMMANDS(&xtics, &mxtics, &mxtfreq, &xticdef,
FIRST_X_AXIS, &rotate_xtics, "x") );
else if
(PROCESS_TIC_COMMANDS(&ytics, &mytics, &mytfreq, &yticdef,
FIRST_Y_AXIS, &rotate_ytics, "y") );
else if
(PROCESS_TIC_COMMANDS(&ztics, &mztics, &mztfreq, &zticdef,
FIRST_Z_AXIS, &rotate_ztics, "z") );
else if (almost_equals(c_token,"ticsl$evel")) {
double tlvl;
struct value a;
c_token++;
/* is datatype 'time' relevant here ? */
tlvl = real(const_express(&a));
ticslevel = tlvl;
}
#define PROCESS_MARGIN(variable, string) \
else if (almost_equals(c_token,string)) {\
++c_token; if (END_OF_COMMAND) variable = -1;\
else { struct value a; variable = real(const_express(&a)); } \
}
PROCESS_MARGIN(lmargin, "lmar$gin")
PROCESS_MARGIN(bmargin, "bmar$gin")
PROCESS_MARGIN(rmargin, "rmar$gin")
PROCESS_MARGIN(tmargin, "tmar$gin")
else
return(FALSE); /* no command match */
return(TRUE);
}
/* return TRUE if a command match, FALSE if not */
static TBOOLEAN
set_three()
{
if (almost_equals(c_token,"sa$mples")) {
register int tsamp1, tsamp2;
struct value a;
c_token++;
tsamp1 = (int)magnitude(const_express(&a));
tsamp2 = tsamp1;
if (!END_OF_COMMAND) {
if (!equals(c_token,","))
int_error("',' expected",c_token);
c_token++;
tsamp2 = (int)magnitude(const_express(&a));
}
if (tsamp1 < 2 || tsamp2 < 2)
int_error("sampling rate must be > 1; sampling unchanged",c_token);
else {
register struct surface_points *f_3dp = first_3dplot;
first_3dplot = NULL;
sp_free(f_3dp);
samples = tsamp1;
samples_1 = tsamp1;
samples_2 = tsamp2;
}
} else if (almost_equals(c_token,"isosa$mples")) {
register int tsamp1, tsamp2;
struct value a;
c_token++;
tsamp1 = (int)magnitude(const_express(&a));
tsamp2 = tsamp1;
if (!END_OF_COMMAND) {
if (!equals(c_token,","))
int_error("',' expected",c_token);
c_token++;
tsamp2 = (int)magnitude(const_express(&a));
}
if (tsamp1 < 2 || tsamp2 < 2)
int_error("sampling rate must be > 1; sampling unchanged",c_token);
else {
register struct curve_points *f_p = first_plot;
register struct surface_points *f_3dp = first_3dplot;
first_plot = NULL;
first_3dplot = NULL;
cp_free(f_p);
sp_free(f_3dp);
iso_samples_1 = tsamp1;
iso_samples_2 = tsamp2;
}
} else if (almost_equals(c_token,"si$ze")) {
struct value s;
c_token++;
if (END_OF_COMMAND) {
xsize = 1.0;
ysize = 1.0;
} else {
if (almost_equals(c_token, "sq$uare")) {
aspect_ratio = 1.0;
++c_token;
} else if (almost_equals(c_token,"ra$tio")) {
++c_token;
aspect_ratio = real(const_express(&s));
} else if (almost_equals(c_token, "nora$tio") || almost_equals(c_token, "nosq$uare")) {
aspect_ratio = 0.0;
++c_token;
}
if (!END_OF_COMMAND) {
xsize = real(const_express(&s));
if (equals(c_token,",")) {
c_token++;
ysize = real(const_express(&s));
} else {
ysize = xsize;
}
}
}
} else if (almost_equals(c_token,"ticsc$ale")) {
struct value tscl;
c_token++;
if (END_OF_COMMAND) {
ticscale = 1.0;
miniticscale = 0.5;
} else {
ticscale = real(const_express(&tscl));
if (END_OF_COMMAND) {
miniticscale = ticscale*0.5;
} else {
miniticscale = real(const_express(&tscl));
}
}
} else if (almost_equals(c_token,"t$erminal")) {
if (multiplot) {
int_error("You can't change the terminal in multiplot mode", c_token);
}
c_token++;
if (END_OF_COMMAND) {
list_terms();
screen_ok = FALSE;
} else {
term_reset();
term = 0; /* in case set_term() fails */
term = set_term(c_token);
c_token++;
/* get optional mode parameters
* not all drivers reset the option string before
* strcat-ing to it, so we reset it for them
*/
*term_options = 0;
if (term)
(*term->options)();
if (interactive && *term_options)
fprintf(stderr,"Options are '%s'\n",term_options);
}
} else if (almost_equals(c_token,"tim$estamp")) {
c_token++;
if (END_OF_COMMAND || !isstring(c_token))
strcpy(timelabel.text, DEFAULT_TIMESTAMP_FORMAT);
if (!END_OF_COMMAND) {
struct value a;
if (isstring(c_token)) {
/* we have a format string */
quote_str(timelabel.text, c_token, MAX_LINE_LEN);
++c_token;
} else {
strcpy(timelabel.text, DEFAULT_TIMESTAMP_FORMAT);
}
if (almost_equals(c_token,"t$op")) {
timelabel_bottom = FALSE;
++c_token;
} else if (almost_equals(c_token, "b$ottom")) {
timelabel_bottom = TRUE;
++c_token;
}
if (almost_equals(c_token,"r$otate")) {
timelabel_rotate = TRUE;
++c_token;
} else if (almost_equals(c_token, "n$orotate")) {
timelabel_rotate = FALSE;
++c_token;
}
/* We have x,y offsets specified */
if (!END_OF_COMMAND && !equals(c_token,","))
timelabel.xoffset = real(const_express(&a));
if (!END_OF_COMMAND && equals(c_token,",")) {
c_token++;
timelabel.yoffset = real(const_express(&a));
}
if (!END_OF_COMMAND && isstring(c_token)) {
quote_str(timelabel.font, c_token, MAX_LINE_LEN);
++c_token;
} else {
*timelabel.font = 0;
}
}
} else if (almost_equals(c_token,"not$imestamp")) {
*timelabel.text = 0;
c_token++;
} else if (almost_equals(c_token,"vi$ew")) {
int i;
TBOOLEAN was_comma = TRUE;
double local_vals[4];
struct value a;
local_vals[0] = surface_rot_x;
local_vals[1] = surface_rot_z;
local_vals[2] = surface_scale;
local_vals[3] = surface_zscale;
c_token++;
for (i = 0; i < 4 && !(END_OF_COMMAND);) {
if (equals(c_token,",")) {
if (was_comma) i++;
was_comma = TRUE;
c_token++;
} else {
if (!was_comma)
int_error("',' expected",c_token);
local_vals[i] = real(const_express(&a));
i++;
was_comma = FALSE;
}
}
if (local_vals[0] < 0 || local_vals[0] > 180)
int_error("rot_x must be in [0:180] degrees range; view unchanged", c_token);
if (local_vals[1] < 0 || local_vals[1] > 360)
int_error("rot_z must be in [0:360] degrees range; view unchanged", c_token);
if (local_vals[2] < 1e-6)
int_error("scale must be > 0; view unchanged", c_token);
if (local_vals[3] < 1e-6)
int_error("zscale must be > 0; view unchanged", c_token);
surface_rot_x = local_vals[0];
surface_rot_z = local_vals[1];
surface_scale = local_vals[2];
surface_zscale = local_vals[3];
}
/* to save replicated code, define a macro */
#define PROCESS_RANGE(AXIS,STRING, MIN, MAX, AUTO) \
else if (almost_equals(c_token, STRING)) { \
if(almost_equals(++c_token,"re$store")) { /* ULIG */ \
c_token++; \
MIN = get_writeback_min(AXIS); \
MAX = get_writeback_max(AXIS); \
AUTO = 0; \
} else { \
if (!equals(c_token,"[")) int_error("expecting '[' or 'restore'",c_token); \
c_token++; \
AUTO = load_range(AXIS,&MIN,&MAX,AUTO); \
if (!equals(c_token,"]")) int_error("expecting ']'",c_token); \
c_token++; \
if (almost_equals(c_token, "rev$erse")) { \
++c_token; range_flags[AXIS] |= RANGE_REVERSE;\
} else if (almost_equals(c_token, "norev$erse")) { \
++c_token; range_flags[AXIS] &= ~RANGE_REVERSE;\
} if (almost_equals(c_token, "wr$iteback")) { \
++c_token; range_flags[AXIS] |= RANGE_WRITEBACK;\
} else if (almost_equals(c_token, "nowri$teback")) { \
++c_token; range_flags[AXIS] &= ~RANGE_WRITEBACK;\
} \
}}
PROCESS_RANGE(R_AXIS, "rr$ange", rmin, rmax, autoscale_r)
PROCESS_RANGE(T_AXIS, "tr$ange", tmin, tmax, autoscale_t)
PROCESS_RANGE(U_AXIS, "ur$ange", umin, umax, autoscale_u)
PROCESS_RANGE(V_AXIS, "vr$ange", vmin, vmax, autoscale_v)
PROCESS_RANGE(FIRST_X_AXIS, "xr$ange", xmin, xmax, autoscale_x)
PROCESS_RANGE(FIRST_Y_AXIS, "yr$ange", ymin, ymax, autoscale_y)
PROCESS_RANGE(FIRST_Z_AXIS, "zr$ange", zmin, zmax, autoscale_z)
PROCESS_RANGE(SECOND_X_AXIS, "x2r$ange", x2min, x2max, autoscale_x2)
PROCESS_RANGE(SECOND_Y_AXIS, "y2r$ange", y2min, y2max, autoscale_y2)
else if (almost_equals(c_token,"z$ero")) {
struct value a;
c_token++;
zero = magnitude(const_express(&a));
} else if (almost_equals(c_token,"multi$plot")) {
term_start_multiplot();
c_token++;
} else if (almost_equals(c_token,"nomulti$plot")) {
term_end_multiplot();
c_token++;
} else
return(FALSE); /* no command match */
return(TRUE);
}
/*********** Support functions for set_command ***********/
/*
* The set.c PROCESS_TIC_PROP macro has the following characteristics:
* (a) options must in the correct order
* (b) 'set xtics' (no option) resets only the interval (FREQ)
* {it will also negate NO_TICS, see (d)}
* (c) changing any property also resets the interval to automatic
* (d) set no[xy]tics; set [xy]tics changes border to nomirror, rather
* than to the default, mirror.
* (e) effect of 'set no[]tics; set []tics border ...' is compiler
* dependent; if '!(TICS)' is evaluated first, 'border' is an
* undefined variable :-(
*
* This function replaces the macro, and introduces a new option
* 'au$tofreq' to give somewhat different behaviour:
* (a) no change
* (b) 'set xtics' (no option) only affects NO_TICS; 'autofreq' resets
* the interval calulation to automatic
* (c) the interval mode is not affected by changing some other option
* (d) if NO_TICS, set []tics will restore defaults (borders, mirror
* where appropriate)
* (e) if (NO_TICS), border option is processed.
*
* A 'default' option could easily be added to reset all options to
* the initial values - mostly book-keeping.
*
* To retain tic properties after setting no[]tics may also be
* straightforward (save value as negative), but requires changes
* in other code ( e.g. for 'if (xtics)', use 'if (xtics > 0)'
*/
static int set_tic_prop(TICS, MTICS, FREQ, tdef, AXIS, ROTATE, tic_side)
/* generates PROCESS_TIC_PROP strings from tic_side, e.g. "x2"
STRING, NOSTRING, MONTH, NOMONTH, DAY, NODAY, MINISTRING, NOMINI
"nox2t$ics" "nox2m$tics" "nox2d$tics" "nomx2t$ics"
*/
int *TICS, *MTICS, AXIS;
double *FREQ;
struct ticdef *tdef;
TBOOLEAN *ROTATE;
char *tic_side;
{
int match = 0; /* flag, set by matching a tic command */
char nocmd[12]; /* fill w/ "no"+'tic_side'+suffix */
char *cmdptr, *sfxptr;
(void) strcpy(nocmd, "no");
cmdptr = &nocmd[2];
(void) strcpy(cmdptr, tic_side);
sfxptr = &nocmd[strlen(nocmd)];
(void) strcpy(sfxptr, "t$ics"); /* STRING */
if (almost_equals(c_token, cmdptr)) {
match = 1;
if (almost_equals(++c_token, "ax$is")) {
*TICS &= ~TICS_ON_BORDER;
*TICS |= TICS_ON_AXIS;
++c_token;
}
/* if tics are off, reset to default (border) */
if (*TICS == NO_TICS) {
*TICS = TICS_ON_BORDER;
if (!strcmp(tic_side, "x") || !strcmp(tic_side, "y")) {
*TICS |= TICS_MIRROR;
}
}
if (almost_equals(c_token, "bo$rder")) {
*TICS &= ~TICS_ON_AXIS;
*TICS |= TICS_ON_BORDER;
++c_token;
}
if (almost_equals(c_token, "mi$rror")) {
*TICS |= TICS_MIRROR;
++c_token;
} else if (almost_equals(c_token, "nomi$rror")) {
*TICS &= ~TICS_MIRROR;
++c_token;
}
if (almost_equals(c_token, "ro$tate")) {
*ROTATE = TRUE;
++c_token;
} else if (almost_equals(c_token, "noro$tate")) {
*ROTATE = FALSE;
++c_token;
}
if (almost_equals(c_token, "au$tofreq")) { /* auto tic interval */
++c_token;
if (tdef->type == TIC_USER) {
free_marklist(tdef->def.user);
tdef->def.user = NULL;
}
tdef->type = TIC_COMPUTED;
}
/* user spec. is last */
else if (!END_OF_COMMAND) {
load_tics(AXIS, tdef);
}
}
if (almost_equals(c_token, nocmd)) { /* NOSTRING */
*TICS = NO_TICS;
c_token++;
match = 1;
}
/* other options */
(void) strcpy(sfxptr, "m$tics"); /* MONTH */
if (almost_equals(c_token, cmdptr)) {
if (tdef->type == TIC_USER) {
free_marklist(tdef->def.user);
tdef->def.user = NULL;
}
tdef->type = TIC_MONTH;
++c_token;
match = 1;
}
if (almost_equals(c_token, nocmd)) { /* NOMONTH */
tdef->type = TIC_COMPUTED;
++c_token;
match = 1;
}
(void) strcpy(sfxptr, "d$tics"); /* DAYS */
if (almost_equals(c_token, cmdptr)) {
match = 1;
if (tdef->type == TIC_USER) {
free_marklist(tdef->def.user);
tdef->def.user = NULL;
}
tdef->type = TIC_DAY;
++c_token;
}
if (almost_equals(c_token, nocmd)) { /* NODAYS */
tdef->type = TIC_COMPUTED;
++c_token;
match = 1;
}
*cmdptr = 'm';
(void) strcpy(cmdptr + 1, tic_side);
(void) strcat(cmdptr, "t$ics"); /* MINISTRING */
if (almost_equals(c_token, cmdptr)) {
struct value freq;
c_token++;
match = 1;
if (END_OF_COMMAND) {
*MTICS = MINI_AUTO;
} else if (almost_equals(c_token, "def$ault")) {
*MTICS = MINI_DEFAULT;
++c_token;
} else {
*FREQ = real(const_express(&freq));
*FREQ = floor(*FREQ);
*MTICS = MINI_USER;
}
}
if (almost_equals(c_token, nocmd)) { /* NOMINI */
*MTICS = FALSE;
c_token++;
match = 1;
}
return (match);
}
/* process a 'set {x/y/z}label command */
/* set {x/y/z}label {label_text} {x}{,y} */
static void set_xyzlabel(label)
label_struct *label;
{
c_token++;
if (END_OF_COMMAND) { /* no label specified */
*label->text = '\0';
return;
}
if (isstring(c_token)) {
/* We have string specified - grab it. */
quote_str(label->text, c_token, MAX_LINE_LEN);
c_token++;
}
if (END_OF_COMMAND)
return;
if (!almost_equals(c_token, "font") && !isstring(c_token)) {
/* We have x,y offsets specified */
struct value a;
if (!equals(c_token, ","))
label->xoffset = real(const_express(&a));
if (END_OF_COMMAND)
return;
if (equals(c_token, ",")) {
c_token++;
label->yoffset = real(const_express(&a));
}
}
if (END_OF_COMMAND)
return;
/* optional keyword 'font' can go here */
if (almost_equals(c_token, "f$ont"))
++c_token; /* skip it */
if (!isstring(c_token))
int_error("Expected font", c_token);
quote_str(label->font, c_token, MAX_LINE_LEN);
c_token++;
}
/* process a 'set label' command */
/* set label {tag} {label_text} {at x,y} {pos} {font name,size} */
/* Entry font added by DJL */
static void set_label()
{
struct value a;
struct text_label *this_label = NULL;
struct text_label *new_label = NULL;
struct text_label *prev_label = NULL;
struct position pos;
char text[MAX_LINE_LEN + 1], font[MAX_LINE_LEN + 1];
enum JUSTIFY just = LEFT;
int rotate = 0;
int tag;
TBOOLEAN set_text, set_position, set_just = FALSE, set_rot = FALSE,
set_font;
/* get tag */
if (!END_OF_COMMAND
&& !isstring(c_token)
&& !equals(c_token, "at")
&& !equals(c_token, "left")
&& !equals(c_token, "center")
&& !equals(c_token, "centre")
&& !equals(c_token, "right")
&& !almost_equals(c_token, "rot$ate")
&& !almost_equals(c_token, "norot$ate")
&& !equals(c_token, "font")) {
/* must be a tag expression! */
tag = (int) real(const_express(&a));
if (tag <= 0)
int_error("tag must be > zero", c_token);
} else
tag = assign_label_tag(); /* default next tag */
/* get text */
if (!END_OF_COMMAND && isstring(c_token)) {
/* get text */
quote_str(text, c_token, MAX_LINE_LEN);
c_token++;
set_text = TRUE;
} else {
text[0] = '\0'; /* default no text */
set_text = FALSE;
}
/* get justification - what the heck, let him put it here */
if (!END_OF_COMMAND && !equals(c_token, "at") && !equals(c_token, "font")
&& !almost_equals(c_token, "rot$ate") && !almost_equals(c_token, "norot$ate")) {
if (almost_equals(c_token, "l$eft")) {
just = LEFT;
} else if (almost_equals(c_token, "c$entre")
|| almost_equals(c_token, "c$enter")) {
just = CENTRE;
} else if (almost_equals(c_token, "r$ight")) {
just = RIGHT;
} else
int_error("bad syntax in set label", c_token);
c_token++;
set_just = TRUE;
}
/* get position */
if (!END_OF_COMMAND && equals(c_token, "at")) {
c_token++;
get_position(&pos);
set_position = TRUE;
} else {
pos.x = pos.y = pos.z = 0;
pos.scalex = pos.scaley = pos.scalez = first_axes;
set_position = FALSE;
}
/* get justification */
if (!END_OF_COMMAND && !almost_equals(c_token, "rot$ate") && !almost_equals(c_token, "norot$ate") && !equals(c_token, "font")) {
if (set_just)
int_error("only one justification is allowed", c_token);
if (almost_equals(c_token, "l$eft")) {
just = LEFT;
} else if (almost_equals(c_token, "c$entre")
|| almost_equals(c_token, "c$enter")) {
just = CENTRE;
} else if (almost_equals(c_token, "r$ight")) {
just = RIGHT;
} else
int_error("bad syntax in set label", c_token);
c_token++;
set_just = TRUE;
}
/* get rotation (added by RCC) */
if (!END_OF_COMMAND && !equals(c_token, "font")) {
if (almost_equals(c_token, "rot$ate")) {
rotate = TRUE;
} else if (almost_equals(c_token, "norot$ate")) {
rotate = FALSE;
} else
int_error("bad syntax in set label", c_token);
c_token++;
set_rot = TRUE;
}
/* get font */
font[0] = NUL;
set_font = FALSE;
if (!END_OF_COMMAND && equals(c_token, "font")) {
c_token++;
if (END_OF_COMMAND)
int_error("font name and size expected", c_token);
if (isstring(c_token)) {
quote_str(font, c_token, MAX_ID_LEN);
/* get 'name,size', no further check */
set_font = TRUE;
} else
int_error("'fontname,fontsize' expected", c_token);
c_token++;
} /* Entry font added by DJL */
if (!END_OF_COMMAND)
int_error("extraenous or out-of-order arguments in set label", c_token);
/* OK! add label */
if (first_label != NULL) { /* skip to last label */
for (this_label = first_label; this_label != NULL;
prev_label = this_label, this_label = this_label->next)
/* is this the label we want? */
if (tag <= this_label->tag)
break;
}
if (this_label != NULL && tag == this_label->tag) {
/* changing the label */
if (set_position) {
this_label->place = pos;
}
if (set_text)
(void) strcpy(this_label->text, text);
if (set_just)
this_label->pos = just;
if (set_rot)
this_label->rotate = rotate;
if (set_font)
(void) strcpy(this_label->font, font);
} else {
/* adding the label */
new_label = (struct text_label *)
gp_alloc(sizeof(struct text_label), "label");
if (prev_label != NULL)
prev_label->next = new_label; /* add it to end of list */
else
first_label = new_label; /* make it start of list */
new_label->tag = tag;
new_label->next = this_label;
new_label->place = pos;
(void) strcpy(new_label->text, text);
new_label->pos = just;
new_label->rotate = rotate;
(void) strcpy(new_label->font, font);
}
} /* Entry font added by DJL */
/* process 'set nolabel' command */
/* set nolabel {tag} */
static void set_nolabel()
{
struct value a;
struct text_label *this_label;
struct text_label *prev_label;
int tag;
if (END_OF_COMMAND) {
/* delete all labels */
while (first_label != NULL)
delete_label((struct text_label *) NULL, first_label);
} else {
/* get tag */
tag = (int) real(const_express(&a));
if (!END_OF_COMMAND)
int_error("extraneous arguments to set nolabel", c_token);
for (this_label = first_label, prev_label = NULL;
this_label != NULL;
prev_label = this_label, this_label = this_label->next) {
if (this_label->tag == tag) {
delete_label(prev_label, this_label);
return; /* exit, our job is done */
}
}
int_error("label not found", c_token);
}
}
/* assign a new label tag */
/* labels are kept sorted by tag number, so this is easy */
static int /* the lowest unassigned tag number */ assign_label_tag()
{
struct text_label *this_label;
int last = 0; /* previous tag value */
for (this_label = first_label; this_label != NULL;
this_label = this_label->next)
if (this_label->tag == last + 1)
last++;
else
break;
return (last + 1);
}
/* delete label from linked list started by first_label.
* called with pointers to the previous label (prev) and the
* label to delete (this).
* If there is no previous label (the label to delete is
* first_label) then call with prev = NULL.
*/
static void delete_label(prev, this)
struct text_label *prev, *this;
{
if (this != NULL) { /* there really is something to delete */
if (prev != NULL) /* there is a previous label */
prev->next = this->next;
else /* this = first_label so change first_label */
first_label = this->next;
free((char *) this);
}
}
/* process a 'set arrow' command */
/* set arrow {tag} {from x,y} {to x,y} {{no}head} */
static void set_arrow()
{
struct value a;
struct arrow_def *this_arrow = NULL;
struct arrow_def *new_arrow = NULL;
struct arrow_def *prev_arrow = NULL;
struct position spos, epos;
struct lp_style_type loc_lp;
int tag;
TBOOLEAN set_start, set_end, head = 1, set_line = 0;
/* Init struct lp_style_type loc_lp */
reset_lp_properties (&loc_lp);
/* get tag */
if (!END_OF_COMMAND
&& !equals(c_token, "from")
&& !equals(c_token, "to")
) {
/* must be a tag expression! */
tag = (int) real(const_express(&a));
if (tag <= 0)
int_error("tag must be > zero", c_token);
} else
tag = assign_arrow_tag(); /* default next tag */
/* HBB 20001018: removed code here that accepted 'first' or
* 'second' keywords. The resulting variables 'axes' and
* 'set_axes' effected nothing, anyway --> deleted them, too. */
/* get start position */
if (!END_OF_COMMAND && equals(c_token, "from")) {
c_token++;
if (END_OF_COMMAND)
int_error("start coordinates expected", c_token);
/* get coordinates */
get_position(&spos);
set_start = TRUE;
} else {
spos.x = spos.y = spos.z = 0;
spos.scalex = spos.scaley = spos.scalez = first_axes;
set_start = FALSE;
}
/* get end position */
if (!END_OF_COMMAND && equals(c_token, "to")) {
c_token++;
if (END_OF_COMMAND)
int_error("end coordinates expected", c_token);
/* get coordinates */
get_position(&epos);
set_end = TRUE;
} else {
epos.x = epos.y = epos.z = 0;
epos.scalex = epos.scaley = epos.scalez = first_axes;
set_end = FALSE;
}
/* get start position - what the heck, either order is ok */
if (!END_OF_COMMAND && equals(c_token, "from")) {
if (set_start)
int_error("only one 'from' is allowed", c_token);
c_token++;
if (END_OF_COMMAND)
int_error("start coordinates expected", c_token);
/* get coordinates */
get_position(&spos);
set_start = TRUE;
}
if (!END_OF_COMMAND && equals(c_token, "nohead")) {
c_token++;
head = 0;
}
if (!END_OF_COMMAND && equals(c_token, "head")) {
c_token++;
head = 1;
}
set_line = 1;
/* pick up a line spec - allow ls, but no point. */
LP_PARSE(loc_lp, 1, 0, 0, 0);
loc_lp.pointflag = 0; /* standard value for arrows, don't use points */
if (!END_OF_COMMAND)
int_error("extraneous or out-of-order arguments in set arrow", c_token);
/* OK! add arrow */
if (first_arrow != NULL) { /* skip to last arrow */
for (this_arrow = first_arrow; this_arrow != NULL;
prev_arrow = this_arrow, this_arrow = this_arrow->next)
/* is this the arrow we want? */
if (tag <= this_arrow->tag)
break;
}
if (this_arrow != NULL && tag == this_arrow->tag) {
/* changing the arrow */
if (set_start) {
this_arrow->start = spos;
}
if (set_end) {
this_arrow->end = epos;
}
this_arrow->head = head;
if (set_line) {
this_arrow->lp_properties = loc_lp;
}
} else {
/* adding the arrow */
new_arrow = (struct arrow_def *)
gp_alloc(sizeof(struct arrow_def), "arrow");
if (prev_arrow != NULL)
prev_arrow->next = new_arrow; /* add it to end of list */
else
first_arrow = new_arrow; /* make it start of list */
new_arrow->tag = tag;
new_arrow->next = this_arrow;
new_arrow->start = spos;
new_arrow->end = epos;
new_arrow->head = head;
new_arrow->lp_properties = loc_lp;
}
}
/* process 'set noarrow' command */
/* set noarrow {tag} */
static void set_noarrow()
{
struct value a;
struct arrow_def *this_arrow;
struct arrow_def *prev_arrow;
int tag;
if (END_OF_COMMAND) {
/* delete all arrows */
while (first_arrow != NULL)
delete_arrow((struct arrow_def *) NULL, first_arrow);
} else {
/* get tag */
tag = (int) real(const_express(&a));
if (!END_OF_COMMAND)
int_error("extraneous arguments to set noarrow", c_token);
for (this_arrow = first_arrow, prev_arrow = NULL;
this_arrow != NULL;
prev_arrow = this_arrow, this_arrow = this_arrow->next) {
if (this_arrow->tag == tag) {
delete_arrow(prev_arrow, this_arrow);
return; /* exit, our job is done */
}
}
int_error("arrow not found", c_token);
}
}
/* assign a new arrow tag */
/* arrows are kept sorted by tag number, so this is easy */
static int /* the lowest unassigned tag number */
assign_arrow_tag()
{
struct arrow_def *this_arrow;
int last = 0; /* previous tag value */
for (this_arrow = first_arrow; this_arrow != NULL;
this_arrow = this_arrow->next)
if (this_arrow->tag == last + 1)
last++;
else
break;
return (last + 1);
}
/* delete arrow from linked list started by first_arrow.
* called with pointers to the previous arrow (prev) and the
* arrow to delete (this).
* If there is no previous arrow (the arrow to delete is
* first_arrow) then call with prev = NULL.
*/
static void delete_arrow(prev, this)
struct arrow_def *prev, *this;
{
if (this != NULL) { /* there really is something to delete */
if (prev != NULL) /* there is a previous arrow */
prev->next = this->next;
else /* this = first_arrow so change first_arrow */
first_arrow = this->next;
free((char *) this);
}
}
/* ======================================================== */
/* process a 'set linestyle' command */
/* set linestyle {tag} {linetype n} {linewidth x} {pointtype n} {pointsize x} */
static void set_linestyle()
{
struct value a;
struct linestyle_def *this_linestyle = NULL;
struct linestyle_def *new_linestyle = NULL;
struct linestyle_def *prev_linestyle = NULL;
struct lp_style_type loc_lp;
int tag;
/* Init struct lp_style_type loc_lp */
reset_lp_properties (&loc_lp);
/* get tag */
if (!END_OF_COMMAND) {
/* must be a tag expression! */
tag = (int) real(const_express(&a));
if (tag <= 0)
int_error("tag must be > zero", c_token);
} else
tag = assign_linestyle_tag(); /* default next tag */
/* pick up a line spec : dont allow ls, do allow point type
* default to same line type = point type = tag
*/
LP_PARSE(loc_lp, 0, 1, tag - 1, tag - 1);
if (!END_OF_COMMAND)
int_error("extraneous or out-of-order arguments in set linestyle", c_token);
/* OK! add linestyle */
if (first_linestyle != NULL) { /* skip to last linestyle */
for (this_linestyle = first_linestyle; this_linestyle != NULL;
prev_linestyle = this_linestyle, this_linestyle = this_linestyle->next)
/* is this the linestyle we want? */
if (tag <= this_linestyle->tag)
break;
}
if (this_linestyle != NULL && tag == this_linestyle->tag) {
/* changing the linestyle */
this_linestyle->lp_properties = loc_lp;
} else {
/* adding the linestyle */
new_linestyle = (struct linestyle_def *)
gp_alloc(sizeof(struct linestyle_def), "linestyle");
if (prev_linestyle != NULL)
prev_linestyle->next = new_linestyle; /* add it to end of list */
else
first_linestyle = new_linestyle; /* make it start of list */
new_linestyle->tag = tag;
new_linestyle->next = this_linestyle;
new_linestyle->lp_properties = loc_lp;
}
}
/* process 'set nolinestyle' command */
/* set nolinestyle {tag} */
static void set_nolinestyle()
{
struct value a;
struct linestyle_def *this, *prev;
int tag;
if (END_OF_COMMAND) {
/* delete all linestyles */
while (first_linestyle != NULL)
delete_linestyle((struct linestyle_def *) NULL, first_linestyle);
} else {
/* get tag */
tag = (int) real(const_express(&a));
if (!END_OF_COMMAND)
int_error("extraneous arguments to set nolinestyle", c_token);
for (this = first_linestyle, prev = NULL;
this != NULL;
prev = this, this = this->next) {
if (this->tag == tag) {
delete_linestyle(prev, this);
return; /* exit, our job is done */
}
}
int_error("linestyle not found", c_token);
}
}
/* assign a new linestyle tag */
/* linestyles are kept sorted by tag number, so this is easy */
static int /* the lowest unassigned tag number */
assign_linestyle_tag()
{
struct linestyle_def *this;
int last = 0; /* previous tag value */
for (this = first_linestyle; this != NULL; this = this->next)
if (this->tag == last + 1)
last++;
else
break;
return (last + 1);
}
/* delete linestyle from linked list started by first_linestyle.
* called with pointers to the previous linestyle (prev) and the
* linestyle to delete (this).
* If there is no previous linestyle (the linestyle to delete is
* first_linestyle) then call with prev = NULL.
*/
static void delete_linestyle(prev, this)
struct linestyle_def *prev, *this;
{
if (this != NULL) { /* there really is something to delete */
if (prev != NULL) /* there is a previous linestyle */
prev->next = this->next;
else /* this = first_linestyle so change first_linestyle */
first_linestyle = this->next;
free((char *) this);
}
}
/*
* auxiliary functions for the `set linestyle` command
*/
void lp_use_properties(lp, tag, pointflag)
struct lp_style_type *lp;
int tag, pointflag;
{
/* This function looks for a linestyle defined by 'tag' and copies
* its data into the structure 'lp'.
*
* If 'pointflag' equals ZERO, the properties belong to a linestyle
* used with arrows. In this case no point properties will be
* passed to the terminal (cf. function 'term_apply_lp_properties' below).
*/
struct linestyle_def *this;
this = first_linestyle;
while (this != NULL) {
if (this->tag == tag) {
*lp = this->lp_properties;
lp->pointflag = pointflag;
return;
} else {
this = this->next;
}
}
/* tag not found: */
int_error("linestyle not found", NO_CARET);
}
/* ======================================================== */
enum PLOT_STYLE /* not static; used by command.c */
get_style()
{
register enum PLOT_STYLE ps = LINES; /* HBB: initial value, for 'gcc -W} */
c_token++;
if (almost_equals(c_token, "l$ines"))
ps = LINES;
else if (almost_equals(c_token, "i$mpulses"))
ps = IMPULSES;
else if (almost_equals(c_token, "p$oints"))
ps = POINTSTYLE;
else if (almost_equals(c_token, "linesp$oints") || equals(c_token, "lp"))
ps = LINESPOINTS;
else if (almost_equals(c_token, "d$ots"))
ps = DOTS;
else if (almost_equals(c_token, "ye$rrorbars"))
ps = YERRORBARS;
else if (almost_equals(c_token, "e$rrorbars"))
ps = YERRORBARS;
else if (almost_equals(c_token, "xe$rrorbars"))
ps = XERRORBARS;
else if (almost_equals(c_token, "xye$rrorbars"))
ps = XYERRORBARS;
else if (almost_equals(c_token, "boxes"))
ps = BOXES;
else if (almost_equals(c_token, "boxer$rorbars"))
ps = BOXERROR;
else if (almost_equals(c_token, "boxx$yerrorbars"))
ps = BOXXYERROR;
else if (almost_equals(c_token, "st$eps"))
ps = STEPS;
else if (almost_equals(c_token, "fs$teps"))
ps = FSTEPS;
else if (almost_equals(c_token, "his$teps"))
ps = HISTEPS;
else if (almost_equals(c_token, "vec$tor")) /* HBB: minor cosmetic change */
ps = VECTOR;
else if (almost_equals(c_token, "fin$ancebars"))
ps = FINANCEBARS;
else if (almost_equals(c_token, "can$dlesticks"))
ps = CANDLESTICKS;
else {
int_error("expecting 'lines', 'points', 'linespoints', 'dots', 'impulses',\n\
'yerrorbars', 'xerrorbars', 'xyerrorbars', 'steps', 'fsteps', 'histeps',\n\
'boxes', 'boxerrorbars', 'boxxyerrorbars', 'vector', 'financebars', 'candlesticks'", c_token);
return LINES; /* keep gcc -Wuninitialised happy */
}
c_token++;
return (ps);
}
/* For set [xy]tics... command */
static void load_tics(axis, tdef)
int axis;
struct ticdef *tdef; /* change this ticdef */
{
if (equals(c_token, "(")) { /* set : TIC_USER */
c_token++;
load_tic_user(axis, tdef);
} else { /* series : TIC_SERIES */
load_tic_series(axis, tdef);
}
}
/* load TIC_USER definition */
/* (tic[,tic]...)
* where tic is ["string"] value
* Left paren is already scanned off before entry.
*/
static void load_tic_user(axis, tdef)
int axis;
struct ticdef *tdef;
{
struct ticmark *list = NULL; /* start of list */
struct ticmark *last = NULL; /* end of list */
struct ticmark *tic = NULL; /* new ticmark */
char temp_string[MAX_LINE_LEN];
while (!END_OF_COMMAND) {
/* parse a new ticmark */
tic = (struct ticmark *) gp_alloc(sizeof(struct ticmark), (char *) NULL);
if (tic == (struct ticmark *) NULL) {
free_marklist(list);
int_error("out of memory for tic mark", c_token);
}
/* syntax is ( ['format'] value , ... )
* but for timedata, the value itself is a string, which
* complicates things somewhat
*/
/* has a string with it? */
if (isstring(c_token) &&
(datatype[axis] != TIME || isstring(c_token + 1))) {
quote_str(temp_string, c_token, MAX_LINE_LEN);
tic->label = gp_alloc(strlen(temp_string) + 1, "tic label");
(void) strcpy(tic->label, temp_string);
c_token++;
} else
tic->label = NULL;
/* in any case get the value */
GET_NUM_OR_TIME(tic->position, axis);
tic->next = NULL;
/* append to list */
if (list == NULL)
last = list = tic; /* new list */
else { /* append to list */
last->next = tic;
last = tic;
}
/* expect "," or ")" here */
if (!END_OF_COMMAND && equals(c_token, ","))
c_token++; /* loop again */
else
break; /* hopefully ")" */
}
if (END_OF_COMMAND || !equals(c_token, ")")) {
free_marklist(list);
int_error("expecting right parenthesis )", c_token);
}
c_token++;
/* successful list */
if (tdef->type == TIC_USER) {
/* remove old list */
/* VAX Optimiser was stuffing up following line. Turn Optimiser OFF */
free_marklist(tdef->def.user);
tdef->def.user = NULL;
}
tdef->type = TIC_USER;
tdef->def.user = list;
}
static void free_marklist(list)
struct ticmark *list;
{
register struct ticmark *freeable;
while (list != NULL) {
freeable = list;
list = list->next;
if (freeable->label != NULL)
free((char *) freeable->label);
free((char *) freeable);
}
}
/* load TIC_SERIES definition */
/* [start,]incr[,end] */
static void load_tic_series(axis, tdef)
int axis;
struct ticdef *tdef;
{
double start, incr, end;
int incr_token;
GET_NUM_OR_TIME(start, axis);
if (!equals(c_token, ",")) {
/* only step specified */
incr = start;
start = -VERYLARGE;
end = VERYLARGE;
} else {
c_token++;
incr_token = c_token;
GET_NUM_OR_TIME(incr, axis);
if (END_OF_COMMAND)
end = VERYLARGE;
else {
if (!equals(c_token, ","))
int_error("expecting comma to separate incr,end", c_token);
c_token++;
GET_NUM_OR_TIME(end, axis);
}
if (!END_OF_COMMAND)
int_error("tic series is defined by [start,]increment[,end]", c_token);
if (start < end && incr <= 0)
int_error("increment must be positive", incr_token);
if (start > end && incr >= 0)
int_error("increment must be negative", incr_token);
if (start > end) {
/* put in order */
double numtics;
numtics = floor((end * (1 + SIGNIF) - start) / incr);
end = start;
start = end + numtics * incr;
incr = -incr;
/*
double temp = start;
start = end;
end = temp;
incr = -incr;
*/
}
}
if (tdef->type == TIC_USER) {
/* remove old list */
/* VAX Optimiser was stuffing up following line. Turn Optimiser OFF */
free_marklist(tdef->def.user);
tdef->def.user = NULL;
}
tdef->type = TIC_SERIES;
tdef->def.series.start = start;
tdef->def.series.incr = incr;
tdef->def.series.end = end;
}
static void load_offsets(a, b, c, d)
double *a, *b, *c, *d;
{
struct value t;
*a = real(const_express(&t)); /* loff value */
if (!equals(c_token, ","))
return;
c_token++;
*b = real(const_express(&t)); /* roff value */
if (!equals(c_token, ","))
return;
c_token++;
*c = real(const_express(&t)); /* toff value */
if (!equals(c_token, ","))
return;
c_token++;
*d = real(const_express(&t)); /* boff value */
}
TBOOLEAN /* new value for autosc */
load_range(axis, a, b, autosc) /* also used by command.c */
int axis;
double *a, *b;
TBOOLEAN autosc;
{
if (equals(c_token, "]"))
return (autosc);
if (END_OF_COMMAND) {
int_error("starting range value or ':' or 'to' expected", c_token);
} else if (!equals(c_token, "to") && !equals(c_token, ":")) {
if (equals(c_token, "*")) {
autosc |= 1;
c_token++;
} else if (equals(c_token, "?")) { /* ULIG */
*a = get_writeback_min(axis);
autosc &= 2;
c_token++;
} else {
GET_NUM_OR_TIME(*a, axis);
autosc &= 2;
}
}
if (!equals(c_token, "to") && !equals(c_token, ":"))
int_error("':' or keyword 'to' expected", c_token);
c_token++;
if (!equals(c_token, "]")) {
if (equals(c_token, "*")) {
autosc |= 2;
c_token++;
} else if (equals(c_token, "?")) { /* ULIG */
*b = get_writeback_max(axis);
autosc &= 1;
c_token++;
} else {
GET_NUM_OR_TIME(*b, axis);
autosc &= 1;
}
}
return (autosc);
}
/* return 1 if format looks like a numeric format
* ie more than one %{efg}, or %something-else
*/
static int looks_like_numeric(format)
char *format;
{
if (!(format = strchr(format, '%')))
return 0;
while (++format, (*format >= '0' && *format <= '9') || *format == '.');
return (*format == 'f' || *format == 'g' || *format == 'e');
}
/* parse a position of the form
* [coords] x, [coords] y {,[coords] z}
* where coords is one of first,second.graph,screen
* if first or second, we need to take datatype into account
* mixed co-ordinates are for specialists, but it's not particularly
* hard to implement...
*/
#define GET_NUMBER_OR_TIME(store,axes,axis) \
do{if (axes >= 0 && datatype[axes+axis] == TIME && isstring(c_token) ) { \
char ss[80]; struct tm tm; \
quote_str(ss,c_token, 80); ++c_token; \
if (gstrptime(ss,timefmt,&tm)) store = (double) gtimegm(&tm); \
} else {\
struct value value; \
store = real(const_express(&value));\
}}while(0)
/* get_position_type - for use by get_position().
* parses first/second/graph/screen keyword
*/
static void get_position_type(type, axes)
enum position_type *type;
int *axes;
{
if (almost_equals(c_token, "fir$st")) {
++c_token;
*type = first_axes;
} else if (almost_equals(c_token, "sec$ond")) {
++c_token;
*type = second_axes;
} else if (almost_equals(c_token, "gr$aph")) {
++c_token;
*type = graph;
} else if (almost_equals(c_token, "sc$reen")) {
++c_token;
*type = screen;
}
switch (*type) {
case first_axes:
*axes = FIRST_AXES;
return;
case second_axes:
*axes = SECOND_AXES;
return;
default:
*axes = (-1);
return;
}
}
/* get_position() - reads a position for label,arrow,key,... */
static void get_position(pos)
struct position *pos;
{
int axes;
enum position_type type = first_axes;
get_position_type(&type, &axes);
pos->scalex = type;
GET_NUMBER_OR_TIME(pos->x, axes, FIRST_X_AXIS);
if (!equals(c_token, ","))
int_error("Expected comma", c_token);
++c_token;
get_position_type(&type, &axes);
pos->scaley = type;
GET_NUMBER_OR_TIME(pos->y, axes, FIRST_Y_AXIS);
/* z is not really allowed for a screen co-ordinate, but keep it simple ! */
if (equals(c_token, ",")) {
++c_token;
get_position_type(&type, &axes);
pos->scalez = type;
GET_NUMBER_OR_TIME(pos->z, axes, FIRST_Z_AXIS);
} else {
pos->z = 0;
pos->scalez = type; /* same as y */
}
}
static void set_lp_properties(arg, allow_points, lt, pt, lw, ps)
struct lp_style_type *arg;
int allow_points, lt, pt;
double lw, ps;
{
arg->pointflag = allow_points;
arg->l_type = lt;
arg->p_type = pt;
arg->l_width = lw;
arg->p_size = ps;
}
static void reset_lp_properties(arg)
struct lp_style_type *arg;
{
/* See plot.h for struct lp_style_type */
arg->pointflag = arg->l_type = arg->p_type = 0;
arg->l_width = arg->p_size = 1.0;
}
static void set_locale(lcl)
char *lcl;
{
#ifndef NO_LOCALE_H
int i;
struct tm tm;
if (setlocale(LC_TIME, lcl))
safe_strncpy(cur_locale, lcl, sizeof(cur_locale));
else
int_error("Locale not available", c_token);
/* we can do a *lot* better than this ; eg use system functions
* where available; create values on first use, etc
*/
memset(&tm, 0, sizeof(struct tm));
for (i = 0; i < 7; ++i) {
tm.tm_wday = i; /* hope this enough */
strftime(full_day_names[i], sizeof(full_day_names[i]), "%A", &tm);
strftime(abbrev_day_names[i], sizeof(abbrev_day_names[i]), "%a", &tm);
}
for (i = 0; i < 12; ++i) {
tm.tm_mon = i; /* hope this enough */
strftime(full_month_names[i], sizeof(full_month_names[i]), "%B", &tm);
strftime(abbrev_month_names[i], sizeof(abbrev_month_names[i]), "%b", &tm);
}
#else
safe_strncpy(cur_locale, lcl, sizeof(cur_locale));
#endif /* NO_LOCALE_H */
}
/*
* get and set routines for range writeback
* ULIG *
*/
double rm_log(int axis, double val);
double get_writeback_min(axis)
int axis;
{
/* printf("get min(%d)=%g\n",axis,writeback_min[axis]); */
return writeback_min[axis];
}
double get_writeback_max(axis)
int axis;
{
/* printf("get max(%d)=%g\n",axis,writeback_min[axis]); */
return writeback_max[axis];
}
void set_writeback_min(axis, val)
int axis;
double val;
{
val = rm_log(axis,val);
/* printf("set min(%d)=%g\n",axis,val); */
writeback_min[axis] = val;
}
void set_writeback_max(axis, val)
int axis;
double val;
{
val = rm_log(axis,val);
/* printf("set max(%d)=%g\n",axis,val); */
writeback_max[axis] = val;
}
double rm_log(axis, val)
int axis;
double val;
{
TBOOLEAN islog;
double logbase;
/* check whether value is in logscale */
switch( axis ) {
case FIRST_X_AXIS:
logbase = base_log_x;
islog = is_log_x;
break;
case FIRST_Y_AXIS:
logbase = base_log_y;
islog = is_log_y;
break;
case FIRST_Z_AXIS:
logbase = base_log_z;
islog = is_log_z;
break;
case SECOND_X_AXIS:
logbase = base_log_x2;
islog = is_log_x2;
break;
case SECOND_Y_AXIS:
logbase = base_log_y2;
islog = is_log_y2;
break;
default:
islog = FALSE;
}
if( ! islog ) return val;
/* remove logscale from value */
return pow(logbase,val);
}