Annotation of OpenXM_contrib/gnuplot/syscfg.h, Revision 1.1
1.1 ! maekawa 1: /*
! 2: * $Id: $
! 3: *
! 4: */
! 5:
! 6: /* GNUPLOT - syscfg.h */
! 7:
! 8: /*[
! 9: * Copyright 1986 - 1993, 1998 Thomas Williams, Colin Kelley
! 10: *
! 11: * Permission to use, copy, and distribute this software and its
! 12: * documentation for any purpose with or without fee is hereby granted,
! 13: * provided that the above copyright notice appear in all copies and
! 14: * that both that copyright notice and this permission notice appear
! 15: * in supporting documentation.
! 16: *
! 17: * Permission to modify the software is granted, but not the right to
! 18: * distribute the complete modified source code. Modifications are to
! 19: * be distributed as patches to the released version. Permission to
! 20: * distribute binaries produced by compiling modified sources is granted,
! 21: * provided you
! 22: * 1. distribute the corresponding source modifications from the
! 23: * released version in the form of a patch file along with the binaries,
! 24: * 2. add special version identification to distinguish your version
! 25: * in addition to the base release version number,
! 26: * 3. provide your name and address as the primary contact for the
! 27: * support of your modified version, and
! 28: * 4. retain our contact information in regard to use of the base
! 29: * software.
! 30: * Permission to distribute the released version of the source code along
! 31: * with corresponding source modifications in the form of a patch file is
! 32: * granted with same provisions 2 through 4 for binary distributions.
! 33: *
! 34: * This software is provided "as is" without express or implied warranty
! 35: * to the extent permitted by applicable law.
! 36: ]*/
! 37:
! 38: /* This header file provides system dependent definitions. New features
! 39: * and platforms should be added here.
! 40: */
! 41:
! 42: #ifndef SYSCFG_H
! 43: #define SYSCFG_H
! 44:
! 45: #ifdef HAVE_CONFIG_H
! 46: # include "config.h"
! 47: #endif
! 48:
! 49: #include "ansichek.h"
! 50: #include "stdfn.h"
! 51:
! 52: /*
! 53: * Define operating system dependent constants [default value]:
! 54: *
! 55: * OS: [" "] Name of OS plus trailing space
! 56: * HELPFILE: ["docs/gnuplot.gih"] Location of helpfile - overriden by Makefile
! 57: * HOME: ["HOME"] Name of environment variable which points to
! 58: * the directory where gnuplot's config file is found.
! 59: * PLOTRC: [".gnuplot"] Name of the gnuplot startup file.
! 60: * SHELL: ["/bin/sh"] Name, and in some cases, full path to the shell
! 61: * that is used to run external commands.
! 62: * DIRSEP1: ['/'] Primary character which separates path components.
! 63: * DIRSEP2: ['\0'] Secondary character which separates path components.
! 64: *
! 65: */
! 66:
! 67: #if defined(AMIGA_SC_6_1) || defined(AMIGA_AC_5) || defined(__amigaos__)
! 68: # define OS "Amiga "
! 69: # ifndef __amigaos__
! 70: # define HELPFILE "S:gnuplot.gih"
! 71: # define HOME "GNUPLOT"
! 72: # define SHELL "NewShell"
! 73: # define DIRSEP2 ':'
! 74: # endif
! 75: # ifndef AMIGA
! 76: # define AMIGA
! 77: # endif
! 78: /* Fake S_IFIFO for SAS/C
! 79: * See stdfn.h for details
! 80: */
! 81: # ifdef AMIGA_SC_6_1
! 82: # define S_IFIFO S_IREAD
! 83: # endif
! 84: #endif /* Amiga */
! 85:
! 86: #ifdef ATARI
! 87: # define OS "TOS "
! 88: # define HOME "GNUPLOT"
! 89: # define PLOTRC "gnuplot.ini"
! 90: # define SHELL "gulam.prg"
! 91: # define DIRSEP1 '\\'
! 92: # ifdef MTOS
! 93: # define DIRSEP2 '/'
! 94: # endif
! 95: /* I hope this is correct ... */
! 96: # ifdef __PUREC__
! 97: # define sscanf purec_sscanf
! 98: # endif
! 99: #endif /* Atari */
! 100:
! 101: #ifdef DOS386
! 102: # define OS "DOS 386 "
! 103: # define HELPFILE "gnuplot.gih"
! 104: # define HOME "GNUPLOT"
! 105: # define PLOTRC "gnuplot.ini"
! 106: # define DIRSEP1 '\\'
! 107: #endif /* DOS386 */
! 108:
! 109: #ifdef linux
! 110: # define OS "Linux "
! 111: #endif /* Linux */
! 112:
! 113: #if defined(__NeXT__) && !defined(NEXT)
! 114: # define NEXT
! 115: #endif /* NeXT */
! 116:
! 117: #ifdef OS2
! 118: # define OS "OS/2 "
! 119: # define HELPFILE "gnuplot.gih"
! 120: # define HOME "GNUPLOT"
! 121: # define PLOTRC "gnuplot.ini"
! 122: # define SHELL "c:\\os2\\cmd.exe"
! 123: # define DIRSEP1 '\\'
! 124: # define GP_GETCWD(path,len) _getcwd2 (path, len)
! 125: #endif /* OS/2 */
! 126:
! 127: #ifdef OSK
! 128: # define OS "OS-9 "
! 129: # define SHELL "/dd/cmds/shell"
! 130: #endif /* OS-9 */
! 131:
! 132: #if defined(vms) || defined(VMS)
! 133: # ifndef VMS
! 134: # define VMS
! 135: # endif
! 136: # define OS "VMS "
! 137: # define HOME "sys$login:"
! 138: # define PLOTRC "gnuplot.ini"
! 139: # ifdef NO_GIH
! 140: /* for show version long */
! 141: # define HELPFILE "GNUPLOT$HELP"
! 142: # endif
! 143: # if !defined(VAXCRTL) && !defined(DECCRTL)
! 144: # error Please /define either VAXCRTL or DECCRTL
! 145: # endif
! 146: /* avoid some IMPLICITFUNC warnings */
! 147: # ifdef __DECC
! 148: # include <starlet.h>
! 149: # endif /* __DECC */
! 150: #endif /* VMS */
! 151:
! 152: #if defined(_WINDOWS) || defined(_Windows)
! 153: # ifndef _Windows
! 154: # define _Windows
! 155: # endif
! 156: # ifdef WIN32
! 157: # define OS "MS-Windows 32 bit "
! 158: /* introduced by Pedro Mendes, prm@aber.ac.uk */
! 159: # define far
! 160: /* Fix for broken compiler headers
! 161: * See stdfn.h
! 162: */
! 163: # define S_IFIFO _S_IFIFO
! 164: # else
! 165: # ifndef WIN16
! 166: # define WIN16
! 167: # endif
! 168: # define OS "MS-Windows "
! 169: # endif /* WIN32 */
! 170: # define HOME "GNUPLOT"
! 171: # define PLOTRC "gnuplot.ini"
! 172: # define DIRSEP1 '\\'
! 173: #endif /* _WINDOWS */
! 174:
! 175: #if defined(MSDOS) && !defined(_Windows)
! 176: # if !defined(DOS32) && !defined(DOS16)
! 177: # define DOS16
! 178: # endif
! 179: # ifdef MTOS
! 180: # define OS "TOS & MiNT & MULTITOS & Magic - "
! 181: # endif /* MTOS */
! 182: # undef HELPFILE
! 183: # define HELPFILE "gnuplot.gih"
! 184: # define HOME "GNUPLOT"
! 185: # define PLOTRC "gnuplot.ini"
! 186: # define OS "MS-DOS "
! 187: # define DIRSEP1 '\\'
! 188: # ifdef __DJGPP__
! 189: # define DIRSEP2 '/'
! 190: # endif
! 191: #endif /* MSDOS */
! 192:
! 193: /* Note: may not catch all IBM AIX compilers or SCO compilers */
! 194: #if defined(__unix__)|| defined(unix) || defined(_AIX) || defined(SCO)
! 195: # ifndef unix
! 196: # define unix
! 197: # endif
! 198: # ifndef OS
! 199: # define OS "Unix "
! 200: # endif
! 201: #endif /* Unix */
! 202:
! 203: /* End OS dependent constants; fall-through defaults
! 204: * for the constants defined above are following.
! 205: */
! 206:
! 207: #ifndef OS
! 208: # define OS " "
! 209: #endif
! 210:
! 211: #ifndef HELPFILE
! 212: # define HELPFILE "docs/gnuplot.gih"
! 213: #endif /* !HELPFILE */
! 214:
! 215: #ifndef HOME
! 216: # define HOME "HOME"
! 217: #endif
! 218:
! 219: #ifndef PLOTRC
! 220: # define PLOTRC ".gnuplot"
! 221: #endif
! 222:
! 223: #ifndef SHELL
! 224: # define SHELL "/bin/sh" /* used if SHELL env variable not set */
! 225: #endif
! 226:
! 227: #ifndef DIRSEP1
! 228: # define DIRSEP1 '/'
! 229: #endif
! 230:
! 231: #ifndef DIRSEP2
! 232: # define DIRSEP2 NUL
! 233: #endif
! 234:
! 235: #ifndef FAQ_LOCATION
! 236: # define FAQ_LOCATION "http://www.uni-karlsruhe.de/~ig25/gnuplot-faq/"
! 237: #endif
! 238:
! 239: #ifndef CONTACT
! 240: # define CONTACT "bug-gnuplot@dartmouth.edu"
! 241: #endif
! 242:
! 243: #ifndef HELPMAIL
! 244: # define HELPMAIL "info-gnuplot@dartmouth.edu"
! 245: #endif
! 246: /* End fall-through defaults */
! 247:
! 248: /* Atari stuff. Moved here from command.c, plot2d.c, readline.c */
! 249: #if defined(ATARI) || defined(MTOS)
! 250: # ifdef __PUREC__
! 251: # include <ext.h>
! 252: # include <tos.h>
! 253: # include <aes.h>
! 254: # else
! 255: # include <osbind.h>
! 256: # include <aesbind.h>
! 257: # include <support.h>
! 258: # endif /* __PUREC__ */
! 259: #endif /* ATARI || MTOS */
! 260:
! 261:
! 262: /* DOS/Windows stuff. Moved here from command.c */
! 263: #if defined(MSDOS) || defined(DOS386)
! 264:
! 265: # ifdef DJGPP
! 266: # include <dos.h>
! 267: # include <dir.h> /* HBB: for setdisk() */
! 268: # else
! 269: # include <process.h>
! 270: # endif /* !DJGPP */
! 271:
! 272: # ifdef __ZTC__
! 273: # define HAVE_SLEEP 1
! 274: # define P_WAIT 0
! 275:
! 276: # elif defined(__TURBOC__)
! 277: # include <dos.h> /* for sleep() prototype */
! 278: # ifndef _Windows
! 279: # define HAVE_SLEEP 1
! 280: # include <conio.h>
! 281: # include <dir.h> /* setdisk() */
! 282: # endif /* _Windows */
! 283: # ifdef WIN32
! 284: # define HAVE_SLEEP 1
! 285: # endif
! 286:
! 287: # else /* must be MSC */
! 288: # if !defined(__EMX__) && !defined(DJGPP)
! 289: # ifdef __MSC__
! 290: # include <direct.h> /* for _chdrive() */
! 291: # endif /* __MSC__ */
! 292: # endif /* !__EMX__ && !DJGPP */
! 293: # endif /* !ZTC */
! 294:
! 295: #endif /* MSDOS */
! 296:
! 297:
! 298: /* Watcom's compiler; this should probably be somewhere
! 299: * in the Windows section
! 300: */
! 301: #ifdef __WATCOMC__
! 302: # include <direct.h>
! 303: # define HAVE_GETCWD 1
! 304: #endif
! 305:
! 306:
! 307: /* Misc platforms */
! 308: #if defined(apollo) || defined(alliant)
! 309: # define NO_LIMITS_H
! 310: #endif
! 311:
! 312: #ifdef sequent
! 313: # define NO_LIMITS_H
! 314: # define NO_STRCHR
! 315: #endif
! 316:
! 317:
! 318: /* Autoconf related stuff
! 319: * Transform autoconf defines to gnuplot coding standards
! 320: * This is only relevant for standard ANSI headers and functions
! 321: */
! 322: #ifdef HAVE_CONFIG_H
! 323:
! 324: # ifndef HAVE_ERRNO_H
! 325: # define NO_ERRNO_H
! 326: # endif
! 327:
! 328: # ifndef HAVE_FLOAT_H
! 329: # define NO_FLOAT_H
! 330: # endif
! 331:
! 332: # ifndef HAVE_LIMITS_H
! 333: # define NO_LIMITS_H
! 334: # endif
! 335:
! 336: # ifndef HAVE_LOCALE_H
! 337: # define NO_LOCALE_H
! 338: # endif
! 339:
! 340: # ifndef HAVE_MATH_H
! 341: # define NO_MATH_H
! 342: # endif
! 343:
! 344: # ifndef HAVE_STDLIB_H
! 345: # define NO_STDLIB_H
! 346: # endif
! 347:
! 348: # ifndef HAVE_STRING_H
! 349: # define NO_STRING_H
! 350: # endif
! 351:
! 352: # ifndef HAVE_TIME_H
! 353: # define NO_TIME_H
! 354: # endif
! 355:
! 356: # ifndef HAVE_SYS_TIME_H
! 357: # define NO_SYS_TIME_H
! 358: # endif
! 359:
! 360: # ifndef HAVE_SYS_TYPES_H
! 361: # define NO_SYS_TYPES_H
! 362: # endif
! 363:
! 364: # ifndef HAVE_ATEXIT
! 365: # define NO_ATEXIT
! 366: # endif
! 367:
! 368: # ifndef HAVE_MEMCPY
! 369: # define NO_MEMCPY
! 370: # endif
! 371:
! 372: # ifndef HAVE_MEMMOVE
! 373: # define NO_MEMMOVE
! 374: # endif
! 375:
! 376: # ifndef HAVE_MEMSET
! 377: # define NO_MEMSET
! 378: # endif
! 379:
! 380: # ifndef HAVE_SETVBUF
! 381: # define NO_SETVBUF
! 382: # endif
! 383:
! 384: # ifndef HAVE_STRERROR
! 385: # define NO_STRERROR
! 386: # endif
! 387:
! 388: # ifndef HAVE_STRCHR
! 389: # define NO_STRCHR
! 390: # endif
! 391:
! 392: # ifndef HAVE_STRRCHR
! 393: # define NO_STRRCHR
! 394: # endif
! 395:
! 396: # ifndef HAVE_STRSTR
! 397: # define NO_STRSTR
! 398: # endif
! 399:
! 400: #endif /* HAVE_CONFIG_H */
! 401: /* End autoconf related stuff */
! 402:
! 403: #endif /* !SYSCFG_H */
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to syscfg.h CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM_contrib / gnuplot