Annotation of OpenXM_contrib/gnuplot/term.h, Revision 1.1.1.2
1.1 maekawa 1: /*
1.1.1.2 ! maekawa 2: * $Id: term.h,v 1.12.2.2 1999/08/25 12:17:59 lhecking Exp $
1.1 maekawa 3: *
4: */
5:
6: /* GNUPLOT - term.h */
7:
8: /*[
9: * Copyright 1986 - 1993, 1998 Thomas Williams, Colin Kelley
10: *
11: * Permission to use, copy, and distribute this software and its
12: * documentation for any purpose with or without fee is hereby granted,
13: * provided that the above copyright notice appear in all copies and
14: * that both that copyright notice and this permission notice appear
15: * in supporting documentation.
16: *
17: * Permission to modify the software is granted, but not the right to
18: * distribute the complete modified source code. Modifications are to
19: * be distributed as patches to the released version. Permission to
20: * distribute binaries produced by compiling modified sources is granted,
21: * provided you
22: * 1. distribute the corresponding source modifications from the
23: * released version in the form of a patch file along with the binaries,
24: * 2. add special version identification to distinguish your version
25: * in addition to the base release version number,
26: * 3. provide your name and address as the primary contact for the
27: * support of your modified version, and
28: * 4. retain our contact information in regard to use of the base
29: * software.
30: * Permission to distribute the released version of the source code along
31: * with corresponding source modifications in the form of a patch file is
32: * granted with same provisions 2 through 4 for binary distributions.
33: *
34: * This software is provided "as is" without express or implied warranty
35: * to the extent permitted by applicable law.
36: ]*/
37:
38: /*
39: * term.h: terminal support definitions
40: * Edit this file depending on the set of terminals you wish to support.
41: * Comment out the terminal types that you don't want or don't have, and
42: * uncomment those that you want included. Be aware that some terminal
43: * types (eg, SUN, UNIXPLOT) will require changes in the makefile
44: * LIBS definition.
45: */
46:
47: /*
48: * first draft after all terminals are converted to new layout
49: * Stefan Bodewig Dec. 1995
50: */
51:
52: /* Define SHORT_TERMLIST to select a few terminals. It is easier
53: * to define the macro and list desired terminals in this section.
54: * Sample configuration for a Unix workstation
55: */
56: #ifdef SHORT_TERMLIST
57: # include "dumb.trm" /* dumb terminal */
58: # include "post.trm" /* postscript */
59: # include "regis.trm" /* regis graphics */
60: # include "table.trm" /* built-in, but used for the documentation */
61: # include "tek.trm" /* a Tek 4010 and others including VT-style */
62: # ifdef X11
63: # include "x11.trm" /* x Window system */
64: # endif /* X11 */
65: #else /* include all applicable terminals not commented out */
66:
67: /****************************************************************************/
68: /* Platform dependent part */
69: /****************************************************************************/
70:
71: /* Amiga */
72: #ifdef AMIGA
73: # include "amiga.trm"
74: #endif
75:
76:
77: /* Atari ST and MTOS */
78: #if defined(ATARI) || defined(MTOS)
79: # include "atarivdi.trm"
80: # ifdef MTOS
81: # include "multitos.trm"
82: # endif
83: # include "atariaes.trm"
84: #endif
85:
86:
87: /* Apple Macintosh */
88: #ifdef _Macintosh
89: # include "mac.trm"
90: #endif
91:
92:
1.1.1.2 ! maekawa 93: /* BeOS */
! 94: #ifdef __BEOS__
! 95: # include "be.trm"
! 96: #endif
! 97:
! 98:
1.1 maekawa 99: /****************************************************************************/
100: /* MS-DOS and Windows */
101: #if defined(MSDOS) || defined(_Windows)
102:
103: /* MSDOS with emx-gcc compiler */
104: # if defined(MSDOS) && defined(__EMX__)
105: /* Vesa-Cards */
106: # define EMXVESA
107: # include "emxvga.trm"
108: # endif /* MSDOS && EMX */
109:
110: /* MSDOS with djgpp compiler */
111: # ifdef DJGPP
112: # include "djsvga.trm"
113: # endif
114:
115: /* MSDOS with Zortech-C++ Compiler */
116: # ifdef __ZTC__
117: # include "fg.trm"
118: # endif
119:
120: /* All other Compilers */
121: # ifndef _Windows
122: # ifdef PC
123: /* uncomment the next line to include SuperVGA support */
124: # define BGI_NAME "svga256" /* the name of the SVGA.BGI for Borland C */
125: /* this also triggers the inclusion of Super VGA support */
126: # include "pc.trm" /* all PC types except MS WINDOWS */
127: # endif
128: # else /* _Windows */
129: # include "win.trm" /* MS-Windows */
130: # endif /* _Windows */
131: #endif /* MSDOS || _Windows */
132: /****************************************************************************/
133:
134:
135: /* NeXT */
136: #ifdef NEXT
137: # include "next.trm"
138: #endif
139:
1.1.1.2 ! maekawa 140: /* Apple MacOs X Server (Openstep Unix) */
! 141: #if defined(__APPLE__) && defined(__MACH__)
! 142: # include "openstep.trm"
! 143: #endif
1.1 maekawa 144:
145: /* OS/2 */
146: #ifdef OS2
147: /* presentation manager */
148: # include "pm.trm"
149: # ifdef EMXVESA
150: /* works with DOS and OS/2 (windowed/full screen) */
151: # include "emxvga.trm"
152: # endif
153: #endif /* OS2 */
154:
155:
156: /***************************************************************************/
157: /* Terminals for various Unix platforms */
158: /***************************************************************************/
159:
160: /* Apollo Graphics Primitive Resource */
161: #ifdef APOLLO
162: /* with resizeable windows */
163: # include "apollo.trm"
164: # ifdef GPR
165: /* with fixed windows */
166: # include "gpr.trm"
167: # endif
168: #endif /* Apollo */
169:
170: /* Iris */
171: #ifdef IRIS
172: # include "iris4d.trm"
173: #endif
174:
175:
176: /* Linux VGA */
177: #ifdef LINUXVGA
178: # include "linux.trm"
179: #endif
180:
181:
182: /* MGR Window system */
183: #ifdef MGR
184: # include "mgr.trm"
185: #endif
186:
187: /* Redwood Graphics Interface Protocol UNIPLEX */
188: /* Metafile, requires POSIX */
189: #ifdef RGIP
190: # include "rgip.trm"
191: #endif
192:
193:
194: /* SCO CGI drivers */
195: #ifdef SCO
196: # include "cgi.trm"
197: #endif
198:
199: /* SunView */
200: #ifdef SUN
201: # include "sun.trm"
202: #endif
203:
204:
205: /* VAX Windowing System requires UIS libraries */
206: #ifdef UIS
207: # include "vws.trm"
208: #endif
209:
210: /* AT&T Unix-PC */
211: #ifdef UNIXPC
212: # include "unixpc.trm"
213: #endif
214:
215: /****************************************************************************/
1.1.1.2 ! maekawa 216: /* Terminals not relevant for MSDOS, MS-Windows, ATARI or Amiga */
! 217: #if !(defined(MSDOS) || defined(_Windows) || defined(ATARI) || defined(MTOS) || defined(AMIGA))
1.1 maekawa 218:
219: /* AED 512 and AED 767 graphics terminals */
220: # include "aed.trm"
221:
222: # if defined(UNIXPLOT) || defined(GNUGRAPH)
223: # ifdef GNUGRAPH
224: # include "gnugraph.trm"
225: # else
226: # include "unixplot.trm"
227: # endif /* !GNUGRAPH */
228: # endif /* UNIXPLOT || GNUGRAPH */
229:
230: /* gpic for groff */
231: # include "gpic.trm"
232:
233: /* REGIS graphics language */
234: # include "regis.trm"
235:
236: /* Tektronix 4106, 4107, 4109 and 420x terminals */
237: # include "t410x.trm"
1.1.1.2 ! maekawa 238:
1.1 maekawa 239: /* a Tek 4010 and others including VT-style */
240: # include "tek.trm"
241:
242: /* inboard terminal driver for X11 (dumps gnuplot_x11 commands) */
243: # include "xlib.trm"
244:
1.1.1.2 ! maekawa 245: #endif /* !MSDOS && !_Windows && !_ATARI && !_MTOS && !AMIGA */
1.1 maekawa 246: /****************************************************************************/
247:
248:
249: /****************************************************************************/
250: /* These terminals can be used on any system */
251:
252: #ifdef X11
253: # include "x11.trm" /* X Window System */
254: #endif
255:
256: /* Adobe Illustrator Format */
257: #include "ai.trm"
258:
259: /* Computer Graphics Metafile (eg ms office) */
260: #include "cgm.trm"
261:
262: /* CorelDraw! eps format */
263: #include "corel.trm"
264:
265: /* debugging terminal */
266: #ifdef DEBUG
267: # include "debug.trm"
268: #endif
269:
270: /* dumb terminal */
271: #include "dumb.trm"
272:
273: /* DXF format for use with AutoCad (Release 10.x) */
274: #include "dxf.trm"
275:
1.1.1.2 ! maekawa 276: /* Roland DXY800A plotter */
! 277: /* #include "dxy.trm" */
! 278: /* QMS/EXCL laserprinter (Talaris 1590 and others) */
! 279: /* #include "excl.trm" */
1.1 maekawa 280:
281: /* fig graphics */
282: #include "fig.trm"
283:
284: /* NOTE THAT GIF REQUIRES A SEPARATE LIBRARY : see term/gif.trm */
285: /* GIF format. */
286: #ifdef HAVE_LIBGD
287: # include "gif.trm"
288: #endif
289:
1.1.1.2 ! maekawa 290: /* geographical info system */
! 291: /* #include "grass.trm" */
! 292:
! 293: /* HP2623A and probably others */
! 294: #include "hp26.trm"
! 295:
! 296: /* HP2647 and 2648 */
! 297: #include "hp2648.trm"
! 298:
! 299: /* HP DeskJet 500 C */
! 300: #include "hp500c.trm"
! 301:
! 302: /* HP7475, HP7220 plotters, and (hopefully) lots of others */
! 303: #include "hpgl.trm"
! 304:
! 305: /* HP Laserjet II */
! 306: #include "hpljii.trm"
! 307:
! 308: /* HP PrintJet */
! 309: #include "hppj.trm"
! 310:
! 311: /* Imagen laser printers */
! 312: #include "imagen.trm"
! 313:
! 314: /* Kyocera Prescribe printer */
! 315: /* #include "kyo.trm" */
! 316:
! 317: /* Frame Maker MIF 3.00 format driver */
! 318: #include "mif.trm"
! 319:
! 320: /* portable bit map */
! 321: #include "pbm.trm"
1.1 maekawa 322:
323: /* NOTE THAT PNG REQUIRES A SEPARATE LIBRARY : see term/png.trm */
324: #ifdef HAVE_LIBPNG
325: # include "png.trm"
326: #endif
327:
1.1.1.2 ! maekawa 328: /* postscript */
! 329: #include "post.trm"
! 330:
! 331: /* QMS laser printers */
! 332: #include "qms.trm"
! 333:
! 334: /* built-in, but used for the documentation */
! 335: #include "table.trm"
! 336:
! 337: /* x11 tgif tool */
! 338: #include "tgif.trm"
! 339:
! 340: /* tcl/tk with perl extensions */
! 341: #include "tkcanvas.trm"
! 342:
! 343: /* Vectrix 384 printer, also Tandy colour */
! 344: /* #include "v384.trm" */
1.1 maekawa 345:
346: /* wire printers */
1.1.1.2 ! maekawa 347: /* Epson LX-800, Star NL-10, NX-1000 and lots of others */
! 348: #define EPSONP
! 349:
! 350: /* Epson-style 60-dot per inch printers */
! 351: #define EPS60
! 352:
! 353: /* Epson-style 180-dot per inch (24 pin) printers */
! 354: #define EPS180
! 355:
1.1 maekawa 356: #define NEC
357: #define OKIDATA
358: #define STARC
1.1.1.2 ! maekawa 359:
! 360: /* Tandy DMP-130 series 60-dot per inch graphics */
! 361: #define TANDY60
! 362:
! 363: /* the common driver file for all of these */
! 364: #include "epson.trm"
! 365:
1.1 maekawa 366:
367: /* TeX related terminals */
368: #define EMTEX
1.1.1.2 ! maekawa 369: #define EEPIC
! 370:
! 371: /* latex and emtex */
! 372: #include "latex.trm"
! 373:
! 374: /* latex/tex with picture in postscript */
! 375: #include "pslatex.trm"
! 376:
! 377: /* EEPIC-extended LaTeX driver, for EEPIC users */
! 378: #include "eepic.trm"
! 379:
! 380: /* TPIC specials for TeX */
! 381: #include "tpic.trm"
! 382:
! 383: /* LaTeX picture environment with PSTricks macros */
! 384: #include "pstricks.trm"
! 385:
! 386: /* TeXDraw drawing package for LaTeX */
! 387: #include "texdraw.trm"
! 388:
! 389: /* METAFONT */
! 390: #include "metafont.trm"
! 391:
! 392: /* METAPOST */
! 393: #include "metapost.trm"
1.1 maekawa 394:
395: #endif /* !SHORT_TERMLIST */
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to term.h CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM_contrib / gnuplot