File: [local] / OpenXM_contrib / gnuplot / term / Attic / be.trm (download)
Revision 1.1.1.1 (vendor branch), Sat Jan 22 14:16:20 2000 UTC (24 years, 7 months ago) by maekawa
Branch: GNUPLOT
CVS Tags: maekawa-ipv6, VERSION_3_7_1, RELEASE_20000124, RELEASE_1_2_2, RELEASE_1_2_1, RELEASE_1_1_3, RELEASE_1_1_2 Changes since 1.1: +0 -0
lines
Import gnuplot 3.7
|
/*
* $Id: be.trm,v 1.6.2.1 1999/08/20 12:09:46 lhecking Exp $
*
*/
/*[
* Copyright 1986 - 1993, 1998 Thomas Williams, Colin Kelley
*
* Permission to use, copy, and distribute this software and its
* documentation for any purpose with or without fee is hereby granted,
* provided that the above copyright notice appear in all copies and
* that both that copyright notice and this permission notice appear
* in supporting documentation.
*
* Permission to modify the software is granted, but not the right to
* distribute the complete modified source code. Modifications are to
* be distributed as patches to the released version. Permission to
* distribute binaries produced by compiling modified sources is granted,
* provided you
* 1. distribute the corresponding source modifications from the
* released version in the form of a patch file along with the binaries,
* 2. add special version identification to distinguish your version
* in addition to the base release version number,
* 3. provide your name and address as the primary contact for the
* support of your modified version, and
* 4. retain our contact information in regard to use of the base
* software.
* Permission to distribute the released version of the source code along
* with corresponding source modifications in the form of a patch file is
* granted with same provisions 2 through 4 for binary distributions.
*
* This software is provided "as is" without express or implied warranty
* to the extent permitted by applicable law.
]*/
/*
* This file is included by ../term.c.
*
* be.trm --- inboard terminal driver for BE
*
* AUTHOR
* Xavier Pianet
*
*/
#include "driver.h"
#ifdef TERM_REGISTER
register_term(be)
#endif
#ifdef TERM_PROTO
int BE_args __PROTO((int argc, char *argv[]));
TERM_PUBLIC void BE_options __PROTO((void));
TERM_PUBLIC void BE_init __PROTO((void));
TERM_PUBLIC void BE_graphics __PROTO((void));
TERM_PUBLIC void BE_text __PROTO((void));
TERM_PUBLIC void BE_reset __PROTO((void));
TERM_PUBLIC void BE_move __PROTO((unsigned int x, unsigned int y));
TERM_PUBLIC void BE_vector __PROTO((unsigned int x, unsigned int y));
TERM_PUBLIC void BE_linewidth __PROTO((double lw));
TERM_PUBLIC void BE_pointsize __PROTO((double ps));
TERM_PUBLIC void BE_linetype __PROTO((int lt));
TERM_PUBLIC void BE_put_text __PROTO((unsigned int x, unsigned int y, const char str[]));
TERM_PUBLIC int BE_justify_text __PROTO((enum JUSTIFY mode));
TERM_PUBLIC void BE_point __PROTO((unsigned int x, unsigned int y, int number));
TERM_PUBLIC void BE_fillbox __PROTO((int style, unsigned int x, unsigned y, unsigned int width, unsigned int height));
#define BE_XMAX 4096
#define BE_YMAX 4096
/* approximations for typical font/screen sizes */
#define BE_VCHAR (BE_YMAX/25)
#define BE_HCHAR (BE_XMAX/100)
#define BE_VTIC (BE_YMAX/100)
#define BE_HTIC (BE_XMAX/150)
#endif
#ifndef TERM_PROTO_ONLY
#ifdef TERM_BODY
/* non-zero if '-display' found on command line */
int BE_Display = 0;
static void BE_atexit __PROTO((void));
typedef enum { hasNoArg, hasArg } OptionArg;
static struct beopt {
const char *option; /* Name of option */
OptionArg arg; /* Whether option has argument */
} BE_opts[] =
{
{ "-mono", hasNoArg }, { "-gray", hasNoArg }, { "-clear", hasNoArg },
{ "-pointsize", hasArg },
{ "-iconic", hasNoArg }, { "-rv", hasNoArg },
{ "-reverse", hasNoArg }, { "+rv", hasNoArg },
{ "-synchronous", hasNoArg },
{ "-display", hasArg }, { "-geometry", hasArg }, { "-bg", hasArg },
{ "-background", hasArg }, { "-bd", hasArg },
{ "-bordercolor", hasArg }, { "-bw", hasArg },
{ "-borderwidth", hasArg }, { "-fg", hasArg },
{ "-foreground", hasArg }, { "-fn", hasArg }, { "-font", hasArg },
{ "-name", hasArg },
{ "-title", hasArg },
// { "-xnllanguage", hasArg }, { "-xrm", hasArg },
{ "-raise", hasNoArg }, { "-noraise", hasNoArg },
{ "-persist", hasNoArg }
};
#define BE_nopts (sizeof(BE_opts) / sizeof(BE_opts[0]))
static FILE *BE_ipc;
static char **xargv = (char **)NULL;
static char *optvec[2*BE_nopts+1];
static char BE_command[] = "gnuplot_be";
/* BE_args - scan gnuplot command line for standard Toolkit options (to be done)
* called from plot.c so must not be TERM_PUBLIC (which may be static)
*/
int
BE_args(argc, argv)
int argc;
char *argv[];
{
int nbe = 0, i = 0, n;
xargv = (char **) gp_alloc (argc*sizeof(char *), "<xargv>");
if (!xargv) {
fputs ("not enough memory to copy argv - quitting\n", stderr);
exit (EXIT_FAILURE);
}
/* We make a copy of the argument vector because
* argv is modified later. */
memcpy (xargv, argv, argc*sizeof(char *));
optvec[i++] = BE_command;
while (++argv, --argc > 0) {
for (n = 0; n < BE_nopts; n++) {
if (strcmp(*argv, BE_opts[n].option) == 0) {
optvec[i++] = *xargv;
if (strcmp(*argv, "-display") == 0)
BE_Display++;
if (BE_opts[n].arg == hasArg) {
if (--argc <= 0)
return nbe;
optvec[i++] = *++xargv, ++argv;
nbe++;
}
nbe++;
break;
}
}
if (n == BE_nopts)
break;
}
return nbe;
}
static unsigned int BE_plot_number;
TERM_PUBLIC void
BE_options()
{
if (almost_equals(c_token, "res$et")) {
BE_atexit (); /* tell gnuplot_be to shut down */
++c_token;
}
if (!END_OF_COMMAND) {
struct value a;
BE_plot_number = (int) real(const_express(&a));
/* let gnuplot_be check range */
}
sprintf(term_options, "%d", BE_plot_number);
}
/* we do not want to have to duplicate all the code, so we
* do most of it with macros.
* PRINT0(format), PRINT1(format, p1), PRINT2(format, p1, p2) etc
* also FLUSH0(format), etc, which do an additional flush
*/
/*
* The Be terminal driver uses popen() pipe IPC
*/
static void
BE_atexit ()
{
if (BE_ipc) {
fputs("R\n", BE_ipc);
fclose(BE_ipc);
/* dont wait(), since they might be -persist */
BE_ipc = NULL;
}
}
TERM_PUBLIC void
BE_init()
{
if (!BE_ipc) {
/* first time through or after a reset */
int fdes[2];
pipe(fdes);
if (fork() == 0) {
/* child */
close(fdes[1]);
dup2(fdes[0], 0); /* stdin from pipe */
execvp(BE_command, optvec);
/* if we get here, something went wrong */
perror("exec failed");
exit(1);
}
/* parent */
close(fdes[0]); /* read end of pipe */
BE_ipc = fdopen(fdes[1], "w");
} {
static int been_here = 0;
if (!been_here) {
atexit(BE_atexit);
been_here = 1;
}
}
}
TERM_PUBLIC void
BE_reset()
{
/* leave the pipe alone, until exit or set term be reset */
}
#define PRINT0(fmt) fprintf(BE_ipc, fmt)
#define PRINT1(fmt,p1) fprintf(BE_ipc, fmt,p1)
#define PRINT2(fmt,p1,p2) fprintf(BE_ipc, fmt,p1,p2)
#define PRINT3(fmt,p1,p2,p3) fprintf(BE_ipc, fmt,p1,p2,p3)
#define PRINT4(fmt,p1,p2,p3,p4) fprintf(BE_ipc, fmt,p1,p2,p3,p4)
#define PRINT5(fmt,p1,p2,p3,p4,p5) fprintf(BE_ipc, fmt,p1,p2,p3,p4,p5)
#define FFLUSH() fflush(BE_ipc)
#define BEFORE_GRAPHICS /* nowt */
#define AFTER_TEXT /* nowt */
/* common stuff, using macros defined above */
TERM_PUBLIC void
BE_graphics()
{
BEFORE_GRAPHICS; /* kludge for crippled select */
PRINT1("G%d\n", BE_plot_number); /* for VMS sake, keep as separate prints */
}
TERM_PUBLIC void
BE_text()
{
PRINT0("E\n");
FFLUSH();
AFTER_TEXT; /* kludge for crippled select */
}
TERM_PUBLIC void
BE_move(x, y)
unsigned int x, y;
{
PRINT2("M%04d%04d\n", x, y);
}
TERM_PUBLIC void
BE_vector(x, y)
unsigned int x, y;
{
PRINT2("V%04d%04d\n", x, y);
}
TERM_PUBLIC void
BE_pointsize(ps)
double ps;
{
PRINT2("P7%04d%04d\n", /* size of point symbols */
(int) (term->h_tic * ps * 0.5), (int) (term->v_tic * ps * 0.5));
}
TERM_PUBLIC void
BE_linewidth(lw)
double lw;
{
PRINT1("W%04d\n", (int) lw);
}
TERM_PUBLIC void
BE_linetype(lt)
int lt;
{
PRINT1("L%04d\n", lt);
}
TERM_PUBLIC void
BE_put_text(x, y, str)
unsigned int x, y;
const char str[];
{
/* badly outrange labels can overflow into text field */
if (x < 10000 && y < 10000) {
PRINT3("T%04d%04d%s\n", x, y, str);
}
}
TERM_PUBLIC int
BE_justify_text(mode)
enum JUSTIFY mode;
{
PRINT1("J%04d\n", mode);
return (TRUE);
}
TERM_PUBLIC void
BE_point(x, y, number)
unsigned int x, y;
int number;
{
if (number >= 0)
number %= POINT_TYPES;
number += 1;
PRINT3("P%01d%04d%04d\n", number, x, y);
}
TERM_PUBLIC void
BE_fillbox(style, x, y, w, h)
int style;
unsigned int x, y, w, h;
{
PRINT5("F%04d%04u%04u%04u%04u\n", style, x, y, w, h);
}
#endif /* TERM_BODY */
#ifdef TERM_TABLE
TERM_TABLE_START(be_driver)
"be", "BeOS Window System",
BE_XMAX, BE_YMAX, BE_VCHAR, BE_HCHAR,
BE_VTIC, BE_HTIC, BE_options, BE_init, BE_reset,
BE_text, null_scale, BE_graphics, BE_move, BE_vector,
BE_linetype, BE_put_text, null_text_angle,
BE_justify_text, BE_point, do_arrow, set_font_null,
BE_pointsize, TERM_CAN_MULTIPLOT,
BE_text /* suspend can use same routine */ , 0 /* resume */ ,
BE_fillbox, BE_linewidth
TERM_TABLE_END(be_driver)
#undef LAST_TERM
#define LAST_TERM be_driver
TERM_TABLE_START(BE_driver)
"BE", "BE Window System (identical to be)",
BE_XMAX, BE_YMAX, BE_VCHAR, BE_HCHAR,
BE_VTIC, BE_HTIC, BE_options, BE_init, BE_reset,
BE_text, null_scale, BE_graphics, BE_move, BE_vector,
BE_linetype, BE_put_text, null_text_angle,
BE_justify_text, BE_point, do_arrow, set_font_null,
BE_pointsize, TERM_CAN_MULTIPLOT,
BE_text /* suspend can use same routine */ , 0 /* resume */ ,
BE_fillbox, BE_linewidth
TERM_TABLE_END(BE_driver)
#undef LAST_TERM
#define LAST_TERM be_driver
#endif /* TERM_TABLE */
#endif /* TERM_PROTO_ONLY */
#ifdef TERM_HELP
START_HELP(be)
"1 be",
"?commands set terminal be",
"?set terminal be",
"?set term be",
"?terminal be",
"?term be",
"?be",
"?BE",
" `gnuplot` provides the `be` terminal type for use with X servers. This",
" terminal type is set automatically at startup if the `DISPLAY` environment",
" variable is set, if the `TERM` environment variable is set to `xterm`, or",
" if the `-display` command line option is used.",
"",
" Syntax:",
" set terminal be {reset} {<n>}",
"",
" Multiple plot windows are supported: `set terminal be <n>` directs the",
" output to plot window number n. If n>0, the terminal number will be",
" appended to the window title and the icon will be labeled `gplt <n>`.",
" The active window may distinguished by a change in cursor (from default",
" to crosshair.)",
"",
" Plot windows remain open even when the `gnuplot` driver is changed to a",
" different device. A plot window can be closed by pressing the letter q",
" while that window has input focus, or by choosing `close` from a window",
" manager menu. All plot windows can be closed by specifying `reset`, which",
" actually terminates the subprocess which maintains the windows (unless",
" `-persist` was specified).",
"",
" Plot windows will automatically be closed at the end of the session",
" unless the `-persist` option was given.",
"",
" The size or aspect ratio of a plot may be changed by resizing the `gnuplot`",
" window.",
"",
" Linewidths and pointsizes may be changed from within `gnuplot` with",
" `set linestyle`.",
"",
" For terminal type `be`, `gnuplot` accepts (when initialized) the standard",
" X Toolkit options and resources such as geometry, font, and name from the",
" command line arguments or a configuration file. See the X(1) man page",
" (or its equivalent) for a description of such options.",
"",
" A number of other `gnuplot` options are available for the `be` terminal.",
" These may be specified either as command-line options when `gnuplot` is",
" invoked or as resources in the configuration file \"/.Xdefaults\". They are",
" set upon initialization and cannot be altered during a `gnuplot` session.",
"2 command-line_options",
"?commands set terminal be command-line-options",
"?set terminal be command-line-options",
"?set term be command-line-options",
"?be command-line-options",
"?command-line-options",
" In addition to the X Toolkit options, the following options may be specified",
" on the command line when starting `gnuplot` or as resources in your",
" \".Xdefaults\" file:",
"@start table - first is interactive cleartext form",
" `-clear` requests that the window be cleared momentarily before a",
" new plot is displayed.",
" `-gray` requests grayscale rendering on grayscale or color displays.",
" (Grayscale displays receive monochrome rendering by default.)",
" `-mono` forces monochrome rendering on color displays.",
" `-persist` plot windows survive after main gnuplot program exits",
" `-raise` raise plot window after each plot",
" `-noraise` do not raise plot window after each plot",
" `-tvtwm` requests that geometry specifications for position of the",
" window be made relative to the currently displayed portion",
" of the virtual root.",
"#\\begin{tabular}{|cl|} \\hline",
"#`-mono` & forces monochrome rendering on color displays.\\\\",
"#`-gray` & requests grayscale rendering on grayscale or color displays.\\\\",
"# & (Grayscale displays receive monochrome rendering by default.) \\\\",
"#`-clear` & requests that the window be cleared momentarily before a\\\\",
"# & new plot is displayed. \\\\",
"#`-tvtwm` & requests that geometry specifications for position of the\\\\",
"# & window be made relative to the currently displayed portion\\\\",
"# & of the virtual root. \\\\",
"#`-raise` & raise plot window after each plot. \\\\",
"#`-noraise` & do not raise plot window after each plot. \\\\",
"#`-persist`&plot windows survive after main gnuplot program exits. \\\\",
"%c l .",
"%`-mono`@forces monochrome rendering on color displays.",
"%`-gray`@requests grayscale rendering on grayscale or color displays.",
"% @(Grayscale displays receive monochrome rendering by default.)",
"%`-clear`@requests that the window be cleared momentarily before a",
"% @new plot is displayed.",
"%`-tvtwm`@requests that geometry specifications for position of the",
"% @window be made relative to the currently displayed portion",
"% @of the virtual root.",
"%`-raise`@raise plot window after each plot",
"%`-noraise`@do not raise plot window after each plot",
"%`-persist`@plot windows survive after main gnuplot program exits",
"@end table",
" The options are shown above in their command-line syntax. When entered as",
" resources in \".Xdefaults\", they require a different syntax.",
"",
" Example:",
" gnuplot*gray: on",
"",
" `gnuplot` also provides a command line option (`-pointsize <v>`) and a",
" resource, `gnuplot*pointsize: <v>`, to control the size of points plotted",
" with the `points` plotting style. The value `v` is a real number (greater",
" than 0 and less than or equal to ten) used as a scaling factor for point",
" sizes. For example, `-pointsize 2` uses points twice the default size, and",
" `-pointsize 0.5` uses points half the normal size.",
"2 monochome_options",
"?commands set terminal be monochrome_options",
"?set terminal be monochrome_options",
"?set term be monochrome_options",
"?be monochrome_options",
"?monochrome_options",
" For monochrome displays, `gnuplot` does not honor foreground or background",
" colors. The default is black-on-white. `-rv` or `gnuplot*reverseVideo: on`",
" requests white-on-black.",
"",
"2 color_resources",
"?commands set terminal be color_resources",
"?set terminal be color_resources",
"?set term be color_resources",
"?be color_resources",
"?color_resources",
" For color displays, `gnuplot` honors the following resources (shown here",
" with their default values) or the greyscale resources. The values may be",
" color names as listed in the BE rgb.txt file on your system, hexadecimal",
" RGB color specifications (see BE documentation), or a color name followed",
" by a comma and an `intensity` value from 0 to 1. For example, `blue, 0.5`",
" means a half intensity blue.",
"@start table - first is interactive cleartext form",
" gnuplot*background: white",
" gnuplot*textColor: black",
" gnuplot*borderColor: black",
" gnuplot*axisColor: black",
" gnuplot*line1Color: red",
" gnuplot*line2Color: green",
" gnuplot*line3Color: blue",
" gnuplot*line4Color: magenta",
" gnuplot*line5Color: cyan",
" gnuplot*line6Color: sienna",
" gnuplot*line7Color: orange",
" gnuplot*line8Color: coral",
"#\\begin{tabular}{|cl|} \\hline",
"#&gnuplot*background: white\\\\",
"#&gnuplot*textColor: black\\\\",
"#&gnuplot*borderColor: black\\\\",
"#&gnuplot*axisColor: black\\\\",
"#&gnuplot*line1Color: red\\\\",
"#&gnuplot*line2Color: green\\\\",
"#&gnuplot*line3Color: blue\\\\",
"#&gnuplot*line4Color: magenta\\\\",
"#&gnuplot*line5Color: cyan\\\\",
"#&gnuplot*line6Color: sienna\\\\",
"#&gnuplot*line7Color: orange\\\\",
"#&gnuplot*line8Color: coral\\\\",
"%c l .",
"%@gnuplot*background: white",
"%@gnuplot*textColor: black",
"%@gnuplot*borderColor: black",
"%@gnuplot*axisColor: black",
"%@gnuplot*line1Color: red",
"%@gnuplot*line2Color: green",
"%@gnuplot*line3Color: blue",
"%@gnuplot*line4Color: magenta",
"%@gnuplot*line5Color: cyan",
"%@gnuplot*line6Color: sienna",
"%@gnuplot*line7Color: orange",
"%@gnuplot*line8Color: coral",
"@end table",
"",
" The command-line syntax for these is, for example,",
"",
" Example:",
" gnuplot -background coral",
"",
"2 grayscale_resources",
"?commands set terminal be grayscale_resources",
"?set terminal be grayscale_resources",
"?set term be grayscale_resources",
"?be grayscale_resources",
"?grayscale_resources",
" When `-gray` is selected, `gnuplot` honors the following resources for",
" grayscale or color displays (shown here with their default values). Note",
" that the default background is black.",
"@start table - first is interactive cleartext form",
" gnuplot*background: black",
" gnuplot*textGray: white",
" gnuplot*borderGray: gray50",
" gnuplot*axisGray: gray50",
" gnuplot*line1Gray: gray100",
" gnuplot*line2Gray: gray60",
" gnuplot*line3Gray: gray80",
" gnuplot*line4Gray: gray40",
" gnuplot*line5Gray: gray90",
" gnuplot*line6Gray: gray50",
" gnuplot*line7Gray: gray70",
" gnuplot*line8Gray: gray30",
"#\\begin{tabular}{|cl|} \\hline",
"#&gnuplot*background: black\\\\",
"#&gnuplot*textGray: white\\\\",
"#&gnuplot*borderGray: gray50\\\\",
"#&gnuplot*axisGray: gray50\\\\",
"#&gnuplot*line1Gray: gray100\\\\",
"#&gnuplot*line2Gray: gray60\\\\",
"#&gnuplot*line3Gray: gray80\\\\",
"#&gnuplot*line4Gray: gray40\\\\",
"#&gnuplot*line5Gray: gray90\\\\",
"#&gnuplot*line6Gray: gray50\\\\",
"#&gnuplot*line7Gray: gray70\\\\",
"#&gnuplot*line8Gray: gray30\\\\",
"%c l .",
"%@gnuplot*background: black",
"%@gnuplot*textGray: white",
"%@gnuplot*borderGray: gray50",
"%@gnuplot*axisGray: gray50",
"%@gnuplot*line1Gray: gray100",
"%@gnuplot*line2Gray: gray60",
"%@gnuplot*line3Gray: gray80",
"%@gnuplot*line4Gray: gray40",
"%@gnuplot*line5Gray: gray90",
"%@gnuplot*line6Gray: gray50",
"%@gnuplot*line7Gray: gray70",
"%@gnuplot*line8Gray: gray30",
"@end table",
"",
"2 line_resources",
"?commands set terminal be line_resources",
"?set terminal be line_resources",
"?set term be line_resources",
"?be line_resources",
"?line_resources",
" `gnuplot` honors the following resources for setting the width (in pixels) of",
" plot lines (shown here with their default values.) 0 or 1 means a minimal",
" width line of 1 pixel width. A value of 2 or 3 may improve the appearance of",
" some plots.",
"@start table - first is interactive cleartext form",
" gnuplot*borderWidth: 2",
" gnuplot*axisWidth: 0",
" gnuplot*line1Width: 0",
" gnuplot*line2Width: 0",
" gnuplot*line3Width: 0",
" gnuplot*line4Width: 0",
" gnuplot*line5Width: 0",
" gnuplot*line6Width: 0",
" gnuplot*line7Width: 0",
" gnuplot*line8Width: 0",
"#\\begin{tabular}{|cl|} \\hline",
"#&gnuplot*borderWidth: 2\\\\",
"#&gnuplot*axisWidth: 0\\\\",
"#&gnuplot*line1Width: 0\\\\",
"#&gnuplot*line2Width: 0\\\\",
"#&gnuplot*line3Width: 0\\\\",
"#&gnuplot*line4Width: 0\\\\",
"#&gnuplot*line5Width: 0\\\\",
"#&gnuplot*line6Width: 0\\\\",
"#&gnuplot*line7Width: 0\\\\",
"#&gnuplot*line8Width: 0\\\\",
"%c l .",
"%@gnuplot*borderWidth: 2",
"%@gnuplot*axisWidth: 0",
"%@gnuplot*line1Width: 0",
"%@gnuplot*line2Width: 0",
"%@gnuplot*line3Width: 0",
"%@gnuplot*line4Width: 0",
"%@gnuplot*line5Width: 0",
"%@gnuplot*line6Width: 0",
"%@gnuplot*line7Width: 0",
"%@gnuplot*line8Width: 0",
"@end table",
"",
" `gnuplot` honors the following resources for setting the dash style used for",
" plotting lines. 0 means a solid line. A two-digit number `jk` (`j` and `k`",
" are >= 1 and <= 9) means a dashed line with a repeated pattern of `j` pixels",
" on followed by `k` pixels off. For example, '16' is a \"dotted\" line with one",
" pixel on followed by six pixels off. More elaborate on/off patterns can be",
" specified with a four-digit value. For example, '4441' is four on, four off,",
" four on, one off. The default values shown below are for monochrome displays",
" or monochrome rendering on color or grayscale displays. For color displays,",
" the default for each is 0 (solid line) except for `axisDashes` which defaults",
" to a '16' dotted line.",
"@start table - first is interactive cleartext form",
" gnuplot*borderDashes: 0",
" gnuplot*axisDashes: 16",
" gnuplot*line1Dashes: 0",
" gnuplot*line2Dashes: 42",
" gnuplot*line3Dashes: 13",
" gnuplot*line4Dashes: 44",
" gnuplot*line5Dashes: 15",
" gnuplot*line6Dashes: 4441",
" gnuplot*line7Dashes: 42",
" gnuplot*line8Dashes: 13",
"#\\begin{tabular}{|cl|} \\hline",
"#&gnuplot*borderDashes: 0\\\\",
"#&gnuplot*axisDashes: 16\\\\",
"#&gnuplot*line1Dashes: 0\\\\",
"#&gnuplot*line2Dashes: 42\\\\",
"#&gnuplot*line3Dashes: 13\\\\",
"#&gnuplot*line4Dashes: 44\\\\",
"#&gnuplot*line5Dashes: 15\\\\",
"#&gnuplot*line6Dashes: 4441\\\\",
"#&gnuplot*line7Dashes: 42\\\\",
"#&gnuplot*line8Dashes: 13\\\\",
"%c l .",
"%@gnuplot*borderDashes: 0",
"%@gnuplot*axisDashes: 16",
"%@gnuplot*line1Dashes: 0",
"%@gnuplot*line2Dashes: 42",
"%@gnuplot*line3Dashes: 13",
"%@gnuplot*line4Dashes: 44",
"%@gnuplot*line5Dashes: 15",
"%@gnuplot*line6Dashes: 4441",
"%@gnuplot*line7Dashes: 42",
"%@gnuplot*line8Dashes: 13",
"@end table"
END_HELP(be)
#endif /* TERM_HELP */