File: [local] / OpenXM_contrib / gnuplot / term / Attic / djsvga.trm (download)
Revision 1.1.1.2 (vendor branch), Sat Jan 22 14:16:21 2000 UTC (24 years, 7 months ago) by maekawa
Branch: GNUPLOT
CVS Tags: maekawa-ipv6, VERSION_3_7_1, RELEASE_20000124, RELEASE_1_2_2, RELEASE_1_2_1, RELEASE_1_1_3, RELEASE_1_1_2 Changes since 1.1.1.1: +1 -1
lines
Import gnuplot 3.7.1
|
/*
* $Id: djsvga.trm,v 1.10 1998/12/21 22:23:31 lhecking Exp $
*/
/* GNUPLOT - djsvga.trm */
/*[
* Copyright 1992 - 1993, 1998
*
* Permission to use, copy, and distribute this software and its
* documentation for any purpose with or without fee is hereby granted,
* provided that the above copyright notice appear in all copies and
* that both that copyright notice and this permission notice appear
* in supporting documentation.
*
* Permission to modify the software is granted, but not the right to
* distribute the complete modified source code. Modifications are to
* be distributed as patches to the released version. Permission to
* distribute binaries produced by compiling modified sources is granted,
* provided you
* 1. distribute the corresponding source modifications from the
* released version in the form of a patch file along with the binaries,
* 2. add special version identification to distinguish your version
* in addition to the base release version number,
* 3. provide your name and address as the primary contact for the
* support of your modified version, and
* 4. retain our contact information in regard to use of the base
* software.
* Permission to distribute the released version of the source code along
* with corresponding source modifications in the form of a patch file is
* granted with same provisions 2 through 4 for binary distributions.
*
* This software is provided "as is" without express or implied warranty
* to the extent permitted by applicable law.
]*/
/*
* This file is included by ../term.c.
*
* This terminal driver supports:
* svga
*
* AUTHORS
* Russell Lang
* Edzer Pebesma (gnuplot 3.6: new terminal layout, fonts, grx20)
* Hans-Bernhard Broeker (several improvements)
*
* send your comments or suggestions to (info-gnuplot@dartmouth.edu).
*
*/
/* HBB: A new version, called grx21a was released recently. To
* tell gnuplot you have it, add '-DGRX21' to your compilation flags.
* Currently, that only enables the drawing of wide lines. Maybe more
* to come.
*/
#include "driver.h"
#ifdef TERM_REGISTER
register_term(djsvga) /* no ; */
#endif
#ifdef TERM_PROTO
#define DJSVGA_XMAX 640
#define DJSVGA_YMAX 480
#define DJSVGA_XLAST (DJSVGA_XMAX - 1)
#define DJSVGA_YLAST (DJSVGA_YMAX - 1)
#define DJSVGA_VCHAR 16
#define DJSVGA_HCHAR 8
#define DJSVGA_VTIC 4
#define DJSVGA_HTIC 4
TERM_PUBLIC void DJSVGA_init __PROTO((void));
TERM_PUBLIC void DJSVGA_graphics __PROTO((void));
TERM_PUBLIC void DJSVGA_text __PROTO((void));
TERM_PUBLIC void DJSVGA_reset __PROTO((void));
TERM_PUBLIC void DJSVGA_options __PROTO((void));
TERM_PUBLIC void DJSVGA_linetype __PROTO((int linetype));
TERM_PUBLIC void DJSVGA_move __PROTO((unsigned int x, unsigned int y));
TERM_PUBLIC void DJSVGA_vector __PROTO((unsigned int x, unsigned int y));
TERM_PUBLIC int DJSVGA_angle __PROTO((int ang));
TERM_PUBLIC int DJSVGA_justify_text __PROTO((enum JUSTIFY mode));
TERM_PUBLIC void DJSVGA_put_text __PROTO((unsigned int x, unsigned int y,
char *str));
TERM_PUBLIC int DJSVGA_set_font __PROTO((char *fontname));
TERM_PUBLIC void DJSVGA_suspend __PROTO((void));
TERM_PUBLIC void DJSVGA_resume __PROTO((void));
/* clear part of multiplot */
TERM_PUBLIC void DJSVGA_fillbox __PROTO((int style, unsigned int x1,
unsigned int y1, unsigned int width,
unsigned int height));
TERM_PUBLIC void DJSVGA_linewidth __PROTO((double linewidth));
#define GOT_DJSVGA_PROTO
#endif /* TERM_PROTO */
#ifndef TERM_PROTO_ONLY
#ifdef TERM_BODY
/* SVGA driver using DJGPP */
#if (DJGPP==2)
# define GRX20
#endif
#ifdef GRX20
/* use grx20.h for DJGPP V1 / GRX V2 combo as well */
# include <grx20.h>
#else
# include <grx.h>
#endif
#include <pc.h>
static int dj_startx, dj_starty;
static int dj_xlast, dj_ylast;
#define DJNUMCOLOR 15
/* HBB: Let's just use long for GRX1 as well */
static long dj_color;
static long svga256color[DJNUMCOLOR] =
{7, 8, 2, 3, 4, 5, 9, 14, 12, 15, 13, 10, 11, 1, 6};
static long dj_colors[DJNUMCOLOR];
#ifdef GRX20
/* Save, Restore: for 16 color mode! */
static void *DJSVGA_colorbuf = NULL;
#endif
static GrTextOption DJSVGA_TextOption;
/* HBB: I think we should use GR_NAMEWIDTH (=16), instead of MAX_ID_LEN,
* which has nothing to do with GRX at all */
#ifdef GRX20
char DJSVGA_fontname[MAX_ID_LEN + 1] = "";
#else
char DJSVGA_fontname[MAX_ID_LEN + 1] = "@:pc8x14.fnt"; /* EGA bios font */
#endif
static GrContext *DJSVGA_context = 0; /* save screen for suspend/resume */
static char *dj_textsave = 0; /* for text-screen-saving */
static int dj_cursorx, dj_cursory;
static int dj_width, dj_height;
#ifdef GRX21
static double dj_linewidth; /* store linewidth assignments here */
#endif
TERM_PUBLIC void DJSVGA_init()
{
int i, on, r, g, b, medium = 170, low = 85;
GrFont *font = NULL;
#ifdef GRX20
font = &GrDefaultFont;
#endif
/* HBB: save textscreen contents and cursor-position */
dj_textsave = gp_alloc(ScreenRows() * ScreenCols() * 2, "djsvga term scrbuf");
ScreenRetrieve(dj_textsave);
dj_width = ScreenCols();
dj_height = ScreenRows();
ScreenGetCursor(&dj_cursory, &dj_cursorx);
GrSetMode(GR_default_graphics);
GrSetRGBcolorMode();
GrResetColors();
/* Allocate colors */
for (i = 0; i < DJNUMCOLOR; i++) {
on = (svga256color[i] & 8) ? 255 : medium;
r = (svga256color[i] & 4) ? on : 0;
g = (svga256color[i] & 2) ? on : 0;
b = (svga256color[i] & 1) ? on : 0;
if (svga256color[i] == 8)
r = g = b = low;
dj_colors[i] = GrAllocColor(r, g, b);
}
/* Get the screen size: */
dj_xlast = GrMaxX();
term->xmax = dj_xlast + 1;
dj_ylast = GrMaxY();
term->ymax = dj_ylast + 1;
/* if GRX 1.x loads an GRX 2.x save'd file: */
if (font == NULL && DJSVGA_fontname[0] == '\0')
sprintf(DJSVGA_fontname, "@:pc8x14.fnt");
if (DJSVGA_fontname[0] != '\0')
font = GrLoadFont(DJSVGA_fontname);
if (font == NULL)
font = GrLoadFont("@:pc8x14.fnt"); /* try EGA bios font */
if (font == NULL)
font = GrLoadFont("@:pc8x16.fnt"); /* try VGA bios font */
/*
* HBB: There are cases when we reach this point with font still NULL,
* eg. when the GRXFONT env.variable points to the GRX V1 fonts, but
* GRX V2 is used for this program: some fonts will *fail* to load in
* that setup (e.g. cour20b)! So IMHO, there should be some error
* treatment here..., like int_error("Couldn't load font!");
*/
DJSVGA_TextOption.txo_font = font;
DJSVGA_TextOption.txo_direct = GR_TEXT_RIGHT;
DJSVGA_TextOption.txo_xalign = GR_ALIGN_LEFT;
DJSVGA_TextOption.txo_yalign = GR_ALIGN_CENTER;
DJSVGA_TextOption.txo_chrtype = GR_BYTE_TEXT;
DJSVGA_TextOption.txo_bgcolor.v = GrNOCOLOR;
#ifndef GRX20
DJSVGA_TextOption.txo_xmag = 1;
DJSVGA_TextOption.txo_ymag = 1;
#endif
/* HBB: this version should work in all configurations */
term->v_char = font->h.height;
term->h_char = font->h.width;
#ifdef GRX20
if (DJSVGA_colorbuf == NULL)
DJSVGA_colorbuf = (void *) gp_alloc(GrColorSaveBufferSize(), "djsvga term colorbuf");
GrSaveColors(DJSVGA_colorbuf);
#endif
GrSetMode(GR_default_text);
ScreenUpdate(dj_textsave);
ScreenSetCursor(dj_cursory, dj_cursorx);
}
/*
* HBB: make these two inline, as they're called by other routines
* inside this module, and -finline-functions (normally switched
* on by 'gcc -O3') doesn't work for compiling term.c
*/
__inline__
TERM_PUBLIC void DJSVGA_graphics()
{
ScreenRetrieve(dj_textsave); /* HBB: save text screen contents */
ScreenGetCursor(&dj_cursory, &dj_cursorx);
GrSetMode(GR_default_graphics);
#ifdef GRX20
GrRestoreColors(DJSVGA_colorbuf);
#endif
}
__inline__
TERM_PUBLIC void DJSVGA_text()
{
(void) getkey();
GrSetMode(GR_width_height_text, dj_width, dj_height);
ScreenUpdate(dj_textsave); /* HBB: restore text screen */
ScreenSetCursor(dj_cursory, dj_cursorx);
}
TERM_PUBLIC void DJSVGA_reset()
{
GrResetColors();
free(dj_textsave);
}
TERM_PUBLIC void DJSVGA_options()
{
if (!END_OF_COMMAND && isstring(c_token)) {
quote_str(DJSVGA_fontname, c_token, MAX_ID_LEN);
c_token++;
}
sprintf(term_options, "\"%s\"", DJSVGA_fontname);
}
TERM_PUBLIC void DJSVGA_linetype(linetype)
int linetype;
{
if (linetype >= 13)
linetype %= 13;
/* HBB: set the TextOption color variable right here (faster) */
DJSVGA_TextOption.txo_fgcolor.v = dj_color = dj_colors[linetype + 2];
}
TERM_PUBLIC void DJSVGA_move(x, y)
unsigned int x, y;
{
dj_startx = x;
dj_starty = y;
}
TERM_PUBLIC void DJSVGA_vector(x, y)
unsigned int x, y;
{
#ifdef GRX21
GrLineOption dj_lineoption =
{dj_color, dj_linewidth, 0, ""};
GrCustomLine(dj_startx, dj_ylast - dj_starty, x, dj_ylast - y, &dj_lineoption);
#else
GrLine(dj_startx, dj_ylast - dj_starty, x, dj_ylast - y, dj_color);
#endif
dj_startx = x;
dj_starty = y;
}
/*
* HBB: IMHO, the previous version was seriously flawed. E.g.
* in the termentry, _justify_text was pointing to the
* null_justify_text dummy routine, so DJSVGA_justify wasn't
* ever called at all. I copied the routines from my (now
* otherwise pointless) own private driver, djgrx.trm, to
* cure that.
*/
TERM_PUBLIC int DJSVGA_angle(ang)
int ang;
{
if (ang) {
DJSVGA_TextOption.txo_direct = GR_TEXT_UP;
} else {
DJSVGA_TextOption.txo_direct = GR_TEXT_RIGHT;
}
return TRUE;
}
TERM_PUBLIC int DJSVGA_justify_text(mode)
enum JUSTIFY mode;
{
if (DJSVGA_TextOption.txo_direct == GR_TEXT_RIGHT) {
DJSVGA_TextOption.txo_yalign = GR_ALIGN_CENTER;
switch (mode) {
case LEFT:
DJSVGA_TextOption.txo_xalign = GR_ALIGN_LEFT;
break;
case CENTRE:
DJSVGA_TextOption.txo_xalign = GR_ALIGN_CENTER;
break;
case RIGHT:
DJSVGA_TextOption.txo_xalign = GR_ALIGN_RIGHT;
break;
}
} else {
DJSVGA_TextOption.txo_xalign = GR_ALIGN_CENTER;
switch (mode) {
case LEFT:
DJSVGA_TextOption.txo_yalign = GR_ALIGN_BOTTOM;
break;
case CENTRE:
DJSVGA_TextOption.txo_yalign = GR_ALIGN_CENTER;
break;
case RIGHT:
DJSVGA_TextOption.txo_yalign = GR_ALIGN_TOP;
break;
}
}
return TRUE;
}
TERM_PUBLIC int DJSVGA_set_font(fontname)
char *fontname;
{
char *cp;
GrFont *font;
safe_strncpy(DJSVGA_fontname, fontname, sizeof(DJSVGA_fontname));
cp = strstr(DJSVGA_fontname, ",");
if (cp != NULL)
*cp = NUL;
font = GrLoadFont(DJSVGA_fontname);
/*HBB: if no font found, do *not* report success! */
if (font != NULL) {
GrUnloadFont(DJSVGA_TextOption.txo_font);
DJSVGA_TextOption.txo_font = font;
return TRUE;
} else {
graph_error("Font not found");
return FALSE;
}
}
TERM_PUBLIC void DJSVGA_put_text(x, y, str)
unsigned int x, y;
char *str;
{
/* HBB: why isn't font!=NULL ensured elsewhere? Testing it at
* this point doesn't really make much sense (we're in graphics
* mode, so we can't even print out a useful error message!) */
/*if (DJSVGA_TextOption.txo_font != NULL) */
GrDrawString(str, strlen(str), x, dj_ylast - y, &DJSVGA_TextOption);
}
TERM_PUBLIC void DJSVGA_suspend()
{
DJSVGA_context = GrCreateContext(GrSizeX(), GrSizeY(), 0, 0);
GrBitBltNC(DJSVGA_context, 0, 0, 0, 0, 0, GrMaxX(), GrMaxY(), GrWRITE);
DJSVGA_text();
}
TERM_PUBLIC void DJSVGA_resume()
{
DJSVGA_graphics();
GrBitBltNC(0, 0, 0, DJSVGA_context, 0, 0, GrMaxX(), GrMaxY(), GrWRITE);
GrDestroyContext(DJSVGA_context);
}
TERM_PUBLIC void DJSVGA_fillbox(style, left, bottom, width, height)
int style;
unsigned int left, bottom, width, height;
{
if (style >= 13)
style %= 13;
/* HBB: prize question: should it be 'width-1' instead? */
/* HBB: fill with GRX Color '0', which *should* be black : */
GrFilledBox(left, dj_ylast - bottom, left + width, dj_ylast - bottom - height, 0);
}
TERM_PUBLIC void DJSVGA_linewidth(double linewidth)
{
#ifdef GRX21
dj_linewidth = linewidth;
#endif
}
#endif /* TERM_BODY */
#ifdef TERM_TABLE
/* HBB: I think \" is more readable than \042. BTW: why is this
* option 'documented' here, but not in the Help node? */
TERM_TABLE_START(djsvga_driver)
"svga", "IBM PC/Clone with Super VGA graphics board [\"fontname\"]",
DJSVGA_XMAX, DJSVGA_YMAX, DJSVGA_VCHAR, DJSVGA_HCHAR,
DJSVGA_VTIC, DJSVGA_HTIC,
DJSVGA_options,
DJSVGA_init, DJSVGA_reset, DJSVGA_text,
null_scale, DJSVGA_graphics, DJSVGA_move, DJSVGA_vector,
DJSVGA_linetype, DJSVGA_put_text,
DJSVGA_angle, DJSVGA_justify_text,
do_point, do_arrow, DJSVGA_set_font,
0, /* no pointsize() */
TERM_CAN_MULTIPLOT,
DJSVGA_suspend, DJSVGA_resume,
DJSVGA_fillbox, DJSVGA_linewidth
TERM_TABLE_END(djsvga_driver)
#undef LAST_TERM
#define LAST_TERM djsvga_driver
#endif /* TERM_TABLE */
#endif /* TERM_PROTO_ONLY */
/*
* HBB: I think this documentation should be at least a *bit* longer
* (E.g., the "fontname" parameter is claimed to be non-existent!)
*/
/* RCC: Not any more...
* If you have other ideas about what could be in the help section,
* please let me know (rccrawford@lanl.gov) --- particularly info
* about what fonts are permitted, if there is such a list.
*/
#ifdef TERM_HELP
START_HELP(svga)
"1 svga",
"?commands set terminal svga",
"?set terminal svga",
"?set term svga",
"?terminal svga",
"?term svga",
"?svga",
" The `svga` terminal driver supports PCs with SVGA graphics. It can only be",
" be used if it is compiled with DJGPP. Its only option is the font.",
"",
" Syntax:",
" set terminal svga {\"<fontname>\"}"
END_HELP(svga)
#endif /* TERM_HELP */