Annotation of OpenXM_contrib/gnuplot/term/dxf.trm, Revision 1.1.1.2
1.1 maekawa 1: /*
1.1.1.2 ! maekawa 2: * $Id: dxf.trm,v 1.7 1998/12/14 18:38:43 lhecking Exp $
1.1 maekawa 3: *
4: */
5:
6: /* GNUPLOT - dxf.trm */
7:
8: /*[
9: * Copyright 1991 - 1993, 1998
10: *
11: * Permission to use, copy, and distribute this software and its
12: * documentation for any purpose with or without fee is hereby granted,
13: * provided that the above copyright notice appear in all copies and
14: * that both that copyright notice and this permission notice appear
15: * in supporting documentation.
16: *
17: * Permission to modify the software is granted, but not the right to
18: * distribute the complete modified source code. Modifications are to
19: * be distributed as patches to the released version. Permission to
20: * distribute binaries produced by compiling modified sources is granted,
21: * provided you
22: * 1. distribute the corresponding source modifications from the
23: * released version in the form of a patch file along with the binaries,
24: * 2. add special version identification to distinguish your version
25: * in addition to the base release version number,
26: * 3. provide your name and address as the primary contact for the
27: * support of your modified version, and
28: * 4. retain our contact information in regard to use of the base
29: * software.
30: * Permission to distribute the released version of the source code along
31: * with corresponding source modifications in the form of a patch file is
32: * granted with same provisions 2 through 4 for binary distributions.
33: *
34: * This software is provided "as is" without express or implied warranty
35: * to the extent permitted by applicable law.
36: ]*/
37:
38: /*
39: * This file is included by ../term.c.
40: *
41: * This terminal driver supports:
42: * AutoCad (Release 10.x) dxf file format (import with AutoCad dxfin command)
43: *
44: *
45: * AUTHOR
46: * Florian Hiss (fhis1231@w204zrz.zrz.tu-berlin.de)
47: *
48: * send your comments or suggestions to (info-gnuplot@dartmouth.edu).
49: */
50:
51: /*
52: * adapted to the new terminal layout by Stefan Bodewig (Dec. 1995)
53: */
54:
55: #include "driver.h"
56:
57: #ifdef TERM_REGISTER
58: register_term(dxf)
59: #endif
60:
61: #ifdef TERM_PROTO
62: TERM_PUBLIC void DXF_init __PROTO((void));
63: TERM_PUBLIC void DXF_graphics __PROTO((void));
64: TERM_PUBLIC void DXF_text __PROTO((void));
65: TERM_PUBLIC void DXF_linetype __PROTO((int linetype));
66: TERM_PUBLIC void DXF_move __PROTO((unsigned int x, unsigned int y));
67: TERM_PUBLIC void DXF_vector __PROTO((unsigned int ux, unsigned int uy));
68: TERM_PUBLIC void DXF_put_text __PROTO((unsigned int x, unsigned int y,
69: char str[]));
70: TERM_PUBLIC int DXF_text_angle __PROTO((int ang));
71: TERM_PUBLIC int DXF_justify_text __PROTO((enum JUSTIFY mode));
72: TERM_PUBLIC void DXF_reset __PROTO((void));
73:
74: #define DXF_XMAX (120.0 * DXF_UNIT)
75: #define DXF_YMAX (80.0 * DXF_UNIT)
76: #define DXF_HTIC (0.01 * DXF_XMAX) /* 1.0 percent */
77: #define DXF_VTIC (0.01 * DXF_YMAX) /* 1.0 percent */
78: #define DXF_HCHAR (0.014 * DXF_XMAX) /* 1.4 percent */
79: #define DXF_VCHAR (0.026 * DXF_YMAX) /* 2.6 percent */
80: #endif /* TERM_PROTO */
81:
82: #ifndef TERM_PROTO_ONLY
83: #ifdef TERM_BODY
84:
85: #define DXF_UNIT 60.0
86: #define LINEWIDTH 0.0351 /* default line width is 1 pt */
87:
88: /* 120 (autocad units) wide by 80 (autocad units) high (default)
89: * use the GNUPLOT 'set size' command to change the defaults */
90: /* actual text height */
91: #define DXF_TEXTHEIGHT (0.7 * DXF_VCHAR)
92: /* actual text width, only a guess, we don't know the width of
93: * a character of given height of the AutoCad STANDARD text font,
94: * so change it if you like */
95: #define DXF_TEXTWIDTH (0.7 * DXF_HCHAR)
96: /* number of line types we support. see below */
97: #define DXF_LINE_TYPES 7
98: /* number of layers used for the drawing. see below */
99: #define MAX_LAYER 7
100: /* line type scaling */
101: #define LT_SCALE 1
102:
103: static unsigned int DXF_posx;
104: static unsigned int DXF_posy;
105: /* linetype is mapped to a layer. see below. */
106: static unsigned int dxf_linetype;
107: enum JUSTIFY dxf_justify = LEFT;
108: static float dxf_angle = 0.0; /* either 0 (horizontal) or 90.0 (vertical) */
109:
110: /* text style used in the entire drawing */
111: static char *text_style = "STANDARD";
112: /* text always resides on layer 0 */
113: #define TEXT_LAYER 0
114: /* each linetype resides on its own layer. each layer has its own color.
115: * this avoids difficulties that AutoCad has with proper scaling of
116: * the linetypes.
117: * change the colors according to your needs */
118: static char *layer_name[] ={ "0", "1", "2", "3", "4", "5", "6" };
119: /* the colours are white, red, yellow, green, cyan, blue, magenta.
120: * change them according to your needs.
121: * when using a black and white plotting device the colours map to different
122: * line thicknesses. see description of AutoCad print / plot command */
123: static char *layer_colour[] = { "7", "1", "2", "3", "4", "5", "6" };
124: /* support line types AutoCad has to offer by default. */
125: static char *layer_lines[] = { "CONTINUOUS", "DASHED", "HIDDEN", "CENTER",
126: "PHANTOM", "DOT", "DASHDOT" };
127:
128: static TBOOLEAN vector_was_last = FALSE;
129:
130: TERM_PUBLIC void DXF_init()
131: {
132: DXF_posx = DXF_posy = 0;
133: dxf_linetype = 0;
134: dxf_angle = 0.0;
135: vector_was_last = FALSE;
136: }
137:
138: TERM_PUBLIC void DXF_graphics()
139: {
140: register struct termentry *t = term;
141: int i;
142: static char GPFAR dxfi1[] = "\
143: 999\n\
144: %% GNUPLOT: dxf file for AutoCad\n\
145: 0\nSECTION\n 2\nHEADER\n\
146: 9\n$EXTMIN\n\
147: 10\n0.000\n 20\n0.000\n\
148: 9\n$EXTMAX\n\
149: 10\n%-6.3f\n 20\n%-6.3f\n\
150: 9\n$LIMMIN\n\
151: 10\n0.000\n 20\n0.000\n\
152: 9\n$LIMMAX\n\
153: 10\n%-6.3f\n 20\n%-6.3f\n\
154: 9\n$TEXTSTYLE\n 7\n%s\n\
155: 9\n$TEXTSIZE\n 40\n%-6.3f\n\
156: 9\n$PLINEWID\n 40\n%-6.4f\n\
157: 9\n$LTSCALE\n 40\n%-6.3f\n\
158: 9\n$COORDS\n 70\n 1\n\
159: 9\n$CELTYPE\n 6\nBYLAYER\n\
160: 9\n$CLAYER\n 8\n0\n\
161: 9\n$CECOLOR\n 62\n %s\n\
162: 9\n$MENU\n 1\nacad\n\
163: 0\nENDSEC\n\
164: 0\nSECTION\n 2\nTABLES\n";
165: static char GPFAR dxfi2[] = "\
166: 0\nTABLE\n 2\nLTYPE\n 70\n %d\n\
167: 0\nLTYPE\n 2\nCONTINUOUS\n 70\n 64\n\
168: 3\nSolid line\n 72\n 65\n 73\n 0\n 40\n0.0\n\
169: 0\nLTYPE\n 2\nDASHED\n 70\n 64\n\
170: 3\n__ __ __ __ __ __ __ __ __ __ __ __ __ __ __\n\
171: 72\n 65\n 73\n 2\n 40\n0.75\n 49\n0.5\n 49\n-0.25\n\
172: 0\nLTYPE\n 2\nHIDDEN\n 70\n 64\n\
173: 3\n_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _\n\
174: 72\n 65\n 73\n 2\n 40\n0.375\n 49\n0.25\n 49\n-0.125\n\
175: 0\nLTYPE\n 2\nCENTER\n 70\n 64\n\
176: 3\n____ _ ____ _ ____ _ ____ _ ____ _ ____ _ ____\n\
177: 72\n 65\n 73\n 4\n 40\n2.0\n 49\n1.25\n 49\n-0.25\n\
178: 49\n0.25\n 49\n-0.25\n\
179: 0\nLTYPE\n 2\nPHANTOM\n 70\n 64\n\
180: 3\n_____ _ _ _____ _ _ _____ _ _ _____ _ _ ____\n\
181: 72\n 65\n 73\n 6\n 40\n2.5\n 49\n1.25\n\
182: 49\n-0.25\n 49\n0.25\n 49\n-0.25\n 49\n0.25\n 49\n-0.25\n\
183: 0\nLTYPE\n 2\nDOT\n 70\n 64\n\
184: 3\n...............................................\n\
185: 72\n 65\n 73\n 2\n 40\n0.25\n 49\n0.0\n 49\n-0.25\n\
186: 0\nLTYPE\n 2\nDASHDOT\n 70\n 64\n\
187: 3\n__ . __ . __ . __ . __ . __ . __ . __ . __ . __\n\
188: 72\n 65\n 73\n 4\n 40\n1.0\n 49\n0.5\n 49\n-0.25\n\
189: 49\n0.0\n 49\n-0.25\n\
190: 0\nENDTAB\n";
191:
192: fprintf(gpoutfile, dxfi1,
193: t->xmax / DXF_UNIT, t->ymax / DXF_UNIT,
194: t->xmax / DXF_UNIT, t->ymax / DXF_UNIT,
195: text_style,
196: DXF_TEXTHEIGHT / DXF_UNIT,
197: LINEWIDTH,
198: (double) LT_SCALE,
199: layer_colour[0]);
200: /* the linetype table */
201: fprintf(gpoutfile, dxfi2, DXF_LINE_TYPES);
202: /* the layer table */
203: fprintf(gpoutfile, " 0\nTABLE\n 2\nLAYER\n 70\n %-d\n", MAX_LAYER);
204: for (i = 1; i <= MAX_LAYER; i++)
205: fprintf(gpoutfile, " 0\nLAYER\n 2\n%s\n 70\n 64\n62\n %s\n 6\n%s\n", layer_name[i - 1], layer_colour[i - 1], layer_lines[i - 1]);
206:
207: /* no blocks for insertion */
208: /* start the entity section */
209: fputs(" 0\nENDTAB\n0\nENDSEC\n\
210: 0\nSECTION\n 2\nBLOCKS\n 0\nENDSEC\n\
211: 0\nSECTION\n\
212: 2\nENTITIES\n",
213: gpoutfile);
214: }
215:
216: TERM_PUBLIC void DXF_text()
217: {
218: if (vector_was_last)
219: fputs(" 0\nSEQEND\n", gpoutfile);
220: fputs(" 0\nENDSEC\n 0\nEOF\n", gpoutfile);
221: }
222:
223: TERM_PUBLIC void DXF_linetype(linetype)
224: int linetype;
225: {
226: linetype = ABS(linetype);
227: linetype = linetype % DXF_LINE_TYPES;
228: dxf_linetype = linetype;
229: }
230:
231: TERM_PUBLIC void DXF_move(x, y)
232: unsigned int x, y;
233: {
234: DXF_posx = x;
235: DXF_posy = y;
236: if (vector_was_last)
237: fputs(" 0\nSEQEND\n", gpoutfile);
238: vector_was_last = FALSE;
239: fprintf(gpoutfile, "\
240: 0\nPOLYLINE\n 8\n%s\n 66\n 1\n\
241: 6\n%s\n\
242: 0\nVERTEX\n 8\n%s\n\
243: 6\n%s\n\
244: 10\n%-6.3f\n 20\n%-6.3f\n 30\n0.000\n",
245: layer_name[dxf_linetype],
246: layer_lines[dxf_linetype],
247: layer_name[dxf_linetype],
248: layer_lines[dxf_linetype],
249: DXF_posx / DXF_UNIT, DXF_posy / DXF_UNIT);
250:
251: }
252:
253: TERM_PUBLIC void DXF_vector(ux, uy)
254: unsigned int ux, uy;
255: {
256: DXF_posx = ux;
257: DXF_posy = uy;
258: vector_was_last = TRUE;
259:
260: fprintf(gpoutfile, "\
261: 0\nVERTEX\n 8\n%s\n\
262: 6\n%s\n\
263: 10\n%-6.3f\n 20\n%-6.3f\n 30\n0.000\n",
264: layer_name[dxf_linetype],
265: layer_lines[dxf_linetype],
266: DXF_posx / DXF_UNIT, DXF_posy / DXF_UNIT);
267: }
268:
269: TERM_PUBLIC void DXF_put_text(x, y, str)
270: unsigned int x, y;
271: char str[];
272: {
273: int stl;
274: float xleftpos, yleftpos, xrightpos, yrightpos;
275:
276: /* shut up gcc warnings - SB */
277: xleftpos = yleftpos = xrightpos = yrightpos = 1.0; /* dummy */
278: /* ignore empty strings */
279: if (str[0] == NUL)
280: return;
281:
282: stl = 0;
283: while (str[stl] != NUL)
284: ++stl; /* get string length */
285:
286: if (vector_was_last)
287: fputs(" 0\nSEQEND\n", gpoutfile);
288: vector_was_last = FALSE;
289: fprintf(gpoutfile, " 0\nTEXT\n 8\n%s\n", layer_name[TEXT_LAYER]);
290: if (dxf_angle != 90.0) {
291: switch (dxf_justify) {
292: case LEFT:
293: xleftpos = (float) x;
294: yleftpos = (float) (y - DXF_VCHAR / 4.0);
295: xrightpos = (float) (x + stl * DXF_TEXTWIDTH);
296: yrightpos = yleftpos;
297: break;
298: case RIGHT:
299: xleftpos = (float) (x - stl * DXF_TEXTWIDTH);
300: yleftpos = (float) (y - DXF_VCHAR / 4.0);
301: xrightpos = (float) x;
302: yrightpos = yleftpos;
303: break;
304: case CENTRE:
305: xleftpos = (float) (x - stl * DXF_TEXTWIDTH / 2.0);
306: yleftpos = (float) (y - DXF_VCHAR / 4.0);
307: xrightpos = (float) x; /* center point */
308: yrightpos = yleftpos;
309: break;
310: }
311: } else {
312: switch (dxf_justify) {
313: case LEFT:
314: xleftpos = (float) (x + DXF_VCHAR / 4.0);
315: yleftpos = (float) y;
316: xrightpos = xleftpos;
317: yrightpos = (float) (y + stl * DXF_TEXTWIDTH);
318: break;
319: case RIGHT:
320: xleftpos = (float) (x + DXF_VCHAR / 4.0);
321: yleftpos = (float) (y - stl * DXF_HCHAR);
322: xrightpos = xleftpos;
323: yrightpos = (float) y;
324: break;
325: case CENTRE:
326: xleftpos = (float) (x + DXF_VCHAR / 4.0);
327: yleftpos = (float) (y - stl * DXF_TEXTWIDTH / 2.0);
328: xrightpos = xleftpos;
329: yrightpos = (float) y; /* center point */
330: break;
331: }
332: }
333:
334: fprintf(gpoutfile, "\
335: 10\n%-6.3f\n 20\n%-6.3f\n 30\n0.000\n\
336: 40\n%-6.3f\n 1\n%s\n 50\n%-6.3f\n\
337: 7\n%s\n",
338: xleftpos / DXF_UNIT, yleftpos / DXF_UNIT,
339: DXF_TEXTHEIGHT / DXF_UNIT, str, dxf_angle,
340: text_style);
341:
342: if (dxf_justify != LEFT) {
343: fprintf(gpoutfile, " 72\n%d\n\
344: 11\n%-6.3f\n 21\n%-6.3f\n 31\n0.000\n",
345: dxf_justify,
346: xrightpos / DXF_UNIT, yrightpos / DXF_UNIT);
347: }
348: }
349:
350: TERM_PUBLIC int DXF_text_angle(ang)
351: int ang;
352: {
353: dxf_angle = 0.0;
354: if (ang == 1)
355: dxf_angle = 90.0;
356: return (TRUE);
357: }
358:
359: TERM_PUBLIC int DXF_justify_text(mode)
360: enum JUSTIFY mode;
361: {
362: dxf_justify = mode;
363: return (TRUE);
364: }
365:
366: TERM_PUBLIC void DXF_reset()
367: {
368: DXF_posx = DXF_posy = 0;
369: }
370:
371: #endif /* TERM_BODY */
372:
373: #ifdef TERM_TABLE
374: TERM_TABLE_START(dxf_driver)
375: "dxf", "dxf-file for AutoCad (default size 120x80)",
376: DXF_XMAX, DXF_YMAX, DXF_VCHAR, DXF_HCHAR,
377: DXF_VTIC, DXF_HTIC, options_null, DXF_init, DXF_reset,
378: DXF_text, null_scale, DXF_graphics, DXF_move, DXF_vector,
379: DXF_linetype, DXF_put_text, DXF_text_angle,
380: DXF_justify_text, do_point, do_arrow, set_font_null
381: TERM_TABLE_END(dxf_driver)
382:
383: #undef LAST_TERM
384: #define LAST_TERM dxf_driver
385:
386: #endif /* TERM_TABLE */
387: #endif /* TERM_PROTO_ONLY */
388:
389: #ifdef TERM_HELP
390: START_HELP(dxf)
391: "1 dxf",
392: "?commands set terminal dxf",
393: "?set terminal dxf",
394: "?set term dxf",
395: "?terminal dxf",
396: "?term dxf",
397: "?dxf",
398: " The `dxf` terminal driver creates pictures that can be imported into AutoCad",
399: " (Release 10.x). It has no options of its own, but some features of its plots",
400: " may be modified by other means. The default size is 120x80 AutoCad units,",
401: " which can be changed by `set size`. `dxf` uses seven colors (white, red,",
402: " yellow, green, cyan, blue and magenta), which can be changed only by",
403: " modifying the source file. If a black-and-white plotting device is used, the",
404: " colors are mapped to differing line thicknesses. See the description of the",
405: " AutoCad print/plot command."
406: END_HELP(dxf)
407: #endif /* TERM_HELP */
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to dxf.trm CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM_contrib / gnuplot / term