File: [local] / OpenXM_contrib / gnuplot / term / Attic / eepic.trm (download)
Revision 1.1.1.2 (vendor branch), Sat Jan 22 14:16:22 2000 UTC (24 years, 7 months ago) by maekawa
Branch: GNUPLOT
CVS Tags: maekawa-ipv6, VERSION_3_7_1, RELEASE_20000124, RELEASE_1_2_2, RELEASE_1_2_1, RELEASE_1_1_3, RELEASE_1_1_2 Changes since 1.1.1.1: +1 -1
lines
Import gnuplot 3.7.1
|
/*
* $Id: eepic.trm,v 1.8 1998/12/14 18:38:47 lhecking Exp $
*
*/
/* GNUPLOT - eepic.trm */
/*[
* Copyright 1990 - 1993, 1998
*
* Permission to use, copy, and distribute this software and its
* documentation for any purpose with or without fee is hereby granted,
* provided that the above copyright notice appear in all copies and
* that both that copyright notice and this permission notice appear
* in supporting documentation.
*
* Permission to modify the software is granted, but not the right to
* distribute the complete modified source code. Modifications are to
* be distributed as patches to the released version. Permission to
* distribute binaries produced by compiling modified sources is granted,
* provided you
* 1. distribute the corresponding source modifications from the
* released version in the form of a patch file along with the binaries,
* 2. add special version identification to distinguish your version
* in addition to the base release version number,
* 3. provide your name and address as the primary contact for the
* support of your modified version, and
* 4. retain our contact information in regard to use of the base
* software.
* Permission to distribute the released version of the source code along
* with corresponding source modifications in the form of a patch file is
* granted with same provisions 2 through 4 for binary distributions.
*
* This software is provided "as is" without express or implied warranty
* to the extent permitted by applicable law.
]*/
/*
* This file is included by ../term.c.
*
* This terminal driver supports:
* The EEPIC macros for LaTeX.
*
* AUTHORS
* David Kotz
*
* send your comments or suggestions to (info-gnuplot@dartmouth.edu).
*
*/
/*
* This file contains the eepic terminal driver, intended for use with the
* eepic.sty macro package for LaTeX. This is an alternative to the
* latex driver. You need eepic.sty, epic.sty, and a printer driver that
* supports the tpic \specials.
*
* Although dotted and dashed lines are possible with EEPIC, and are
* tempting, they do not work well for high-sample-rate curves, mushing
* the dashes all together into a solid line. For now anyway, the EEPIC
* driver will have only solid lines. Anyone got a solution?
*
* LATEX must also be defined.
*/
/*
* adapted to the new terminal layout by Stefan Bodewig (Dec. 1995)
*/
#include "driver.h"
#ifdef TERM_REGISTER
register_term(eepic)
#endif
#ifdef TERM_PROTO
TERM_PUBLIC void EEPIC_init __PROTO((void));
TERM_PUBLIC void EEPIC_graphics __PROTO((void));
TERM_PUBLIC void EEPIC_text __PROTO((void));
TERM_PUBLIC void EEPIC_linetype __PROTO((int linetype));
TERM_PUBLIC void EEPIC_move __PROTO((unsigned int x, unsigned int y));
TERM_PUBLIC void EEPIC_point __PROTO((unsigned int x, unsigned int y,
int number));
TERM_PUBLIC void EEPIC_vector __PROTO((unsigned int ux, unsigned int uy));
TERM_PUBLIC void EEPIC_arrow __PROTO((unsigned int sx, unsigned int sy,
unsigned int ex, unsigned int ey,
TBOOLEAN head));
TERM_PUBLIC void EEPIC_put_text __PROTO((unsigned int x, unsigned int y,
char str[]));
TERM_PUBLIC int EEPIC_justify_text __PROTO((enum JUSTIFY mode));
TERM_PUBLIC int EEPIC_text_angle __PROTO((int ang));
TERM_PUBLIC void EEPIC_reset __PROTO((void));
#define EEPIC_PTS_PER_INCH (72.27)
/* resolution of printer we expect to use */
#define DOTS_PER_INCH (300)
/* dot size in pt */
#define EEPIC_UNIT (EEPIC_PTS_PER_INCH/DOTS_PER_INCH)
/* 5 inches wide by 3 inches high (default) */
/* (EEPIC_PTS_PER_INCH/EEPIC_UNIT*5.0) */
#define EEPIC_XMAX (5*DOTS_PER_INCH)
/* (EEPIC_PTS_PER_INCH/EEPIC_UNIT*3.0) */
#define EEPIC_YMAX (3*DOTS_PER_INCH)
#define EEPIC_HTIC (5*DOTS_PER_INCH/72) /* (5./EEPIC_UNIT) */
#define EEPIC_VTIC (5*DOTS_PER_INCH/72) /* (5./EEPIC_UNIT) */
#define EEPIC_HCHAR (DOTS_PER_INCH*53/10/72) /* (5.3/EEPIC_UNIT) */
#define EEPIC_VCHAR (DOTS_PER_INCH*11/72) /* (11./EEPIC_UNIT) */
#endif /* TERM_PROTO */
#ifndef TERM_PROTO_ONLY
#ifdef TERM_BODY
static unsigned int EEPIC_posx;
static unsigned int EEPIC_posy;
enum JUSTIFY eepic_justify = LEFT;
static int eepic_angle = 0;
/* for DOTS point style */
#define EEPIC_TINY_DOT "\\rule{.1pt}{.1pt}"
/* POINTS */
#define EEPIC_POINT_TYPES 12 /* we supply more point types */
static char GPFAR *GPFAR EEPIC_points[] =
{
"\\raisebox{-1.2pt}{\\makebox(0,0){$\\Diamond$}}",
"\\makebox(0,0){$+$}",
"\\raisebox{-1.2pt}{\\makebox(0,0){$\\Box$}}",
"\\makebox(0,0){$\\times$}",
"\\makebox(0,0){$\\triangle$}",
"\\makebox(0,0){$\\star$}",
"\\circle{12}", "\\circle{18}", "\\circle{24}",
"\\circle*{12}", "\\circle*{18}", "\\circle*{24}"
};
/* LINES */
#define EEPIC_NUMLINES 5 /* number of linetypes below */
static char GPFAR *GPFAR EEPIC_lines[] =
{
"\\thicklines \\path", /* -2 border */
"\\thinlines \\drawline[-50]", /* -1 axes */
"\\thinlines \\path", /* 0 solid thin */
"\\thicklines \\path", /* 1 solid thick */
"\\Thicklines \\path", /* 2 solid Thick */
};
/* These are other possibilities
"\\thinlines \\dottedline{30}",
"\\thinlines \\drawline[-30]",
"\\thinlines \\dottedline{60}",
"\\thinlines \\drawline[-60]",
"\\thinlines \\dashline[-10]{20}[6]"
*/
static int EEPIC_type; /* current line type */
static TBOOLEAN EEPIC_inline = FALSE; /* are we in the middle of a line */
void EEPIC_endline __PROTO((void)); /* terminate any line in progress */
static int EEPIC_linecount = 0; /* number of points in line so far */
#define EEPIC_LINEMAX 50 /* max value for linecount */
/* ARROWS */
/* we use the same code as for LATEX */
/* figure out the best arrow */
void best_latex_arrow __PROTO((int sx, int sy, int ex, int ey, int who,
TBOOLEAN head));
TERM_PUBLIC void EEPIC_init()
{
EEPIC_posx = EEPIC_posy = 0;
EEPIC_linetype(-1);
fprintf(gpoutfile, "%% GNUPLOT: LaTeX picture using EEPIC macros\n\
\\setlength{\\unitlength}{%fpt}\n", EEPIC_UNIT);
}
TERM_PUBLIC void EEPIC_graphics()
{
register struct termentry *t = term;
fprintf(gpoutfile, "\\begin{picture}(%d,%d)(0,0)\n\
\\footnotesize\n", t->xmax, t->ymax);
}
TERM_PUBLIC void EEPIC_text()
{
EEPIC_endline();
fputs("\\end{picture}\n", gpoutfile);
}
TERM_PUBLIC void EEPIC_linetype(linetype)
int linetype;
{
EEPIC_endline();
if (linetype >= EEPIC_NUMLINES - 2)
linetype %= (EEPIC_NUMLINES - 2);
EEPIC_type = linetype;
}
TERM_PUBLIC void EEPIC_move(x, y)
unsigned int x, y;
{
EEPIC_endline();
EEPIC_posx = x;
EEPIC_posy = y;
}
TERM_PUBLIC void EEPIC_point(x, y, number) /* version of line_and_point */
unsigned int x, y;
int number; /* type of point */
{
EEPIC_move(x, y);
/* Print the character defined by 'number'; number < 0 means
to use a dot, otherwise one of the defined points. */
fprintf(gpoutfile, "\\put(%d,%d){%s}\n", x, y,
(number < 0 ? EEPIC_TINY_DOT
: EEPIC_points[number % EEPIC_POINT_TYPES]));
}
TERM_PUBLIC void EEPIC_vector(ux, uy)
unsigned int ux, uy;
{
if (!EEPIC_inline) {
EEPIC_inline = TRUE;
/* Start a new line. This depends on line type */
fprintf(gpoutfile, "%s(%u,%u)",
EEPIC_lines[EEPIC_type + 2],
EEPIC_posx, EEPIC_posy);
EEPIC_linecount = 1;
} else {
/* Even though we are in middle of a path,
* we may want to start a new path command.
* If they are too long then latex will choke.
*/
if (EEPIC_linecount++ >= EEPIC_LINEMAX) {
fprintf(gpoutfile, "\n%s(%u,%u)",
EEPIC_lines[EEPIC_type + 2],
EEPIC_posx, EEPIC_posy);
EEPIC_linecount = 1;
}
}
fprintf(gpoutfile, "(%u,%u)", ux, uy);
EEPIC_posx = ux;
EEPIC_posy = uy;
}
void EEPIC_endline()
{
if (EEPIC_inline) {
putc('\n', gpoutfile);
EEPIC_inline = FALSE;
}
}
TERM_PUBLIC void EEPIC_arrow(sx, sy, ex, ey, head)
unsigned int sx, sy, ex, ey;
TBOOLEAN head;
{
best_latex_arrow(sx, sy, ex, ey, 2, head); /* call latex routine */
EEPIC_posx = ex;
EEPIC_posy = ey;
}
TERM_PUBLIC void EEPIC_put_text(x, y, str)
unsigned int x, y; /* reference point of string */
char str[]; /* the text */
{
EEPIC_endline();
fprintf(gpoutfile, "\\put(%d,%d)", x, y);
if ((str[0] == '{') || (str[0] == '[')) {
fprintf(gpoutfile, "{\\makebox(0,0)%s}\n", str);
} else
switch (eepic_angle) {
case 0:{
switch (eepic_justify) {
case LEFT:{
fprintf(gpoutfile,
"{\\makebox(0,0)[l]{%s}}\n", str);
break;
}
case CENTRE:{
fprintf(gpoutfile,
"{\\makebox(0,0){%s}}\n", str);
break;
}
case RIGHT:{
fprintf(gpoutfile,
"{\\makebox(0,0)[r]{%s}}\n", str);
break;
}
}
break;
}
case 1:{ /* put text in a short stack */
switch (eepic_justify) {
case LEFT:{
fprintf(gpoutfile,
"{\\makebox(0,0)[lb]{\\shortstack{%s}}}\n", str);
break;
}
case CENTRE:{
fprintf(gpoutfile,
"{\\makebox(0,0)[l]{\\shortstack{%s}}}\n", str);
break;
}
case RIGHT:{
fprintf(gpoutfile,
"{\\makebox(0,0)[lt]{\\shortstack{%s}}}\n", str);
break;
}
}
break;
}
}
}
TERM_PUBLIC int EEPIC_justify_text(mode)
enum JUSTIFY mode;
{
eepic_justify = mode;
return (TRUE);
}
TERM_PUBLIC int EEPIC_text_angle(ang)
int ang;
{
/* we can't really write text vertically, but this will
put the ylabel centred at the left of the plot, and
then we'll make a \shortstack */
eepic_angle = ang;
return (TRUE);
}
TERM_PUBLIC void EEPIC_reset()
{
EEPIC_endline();
EEPIC_posx = EEPIC_posy = 0;
}
#endif
#ifdef TERM_TABLE
TERM_TABLE_START(eepic_driver)
"eepic", "EEPIC -- extended LaTeX picture environment",
EEPIC_XMAX, EEPIC_YMAX, EEPIC_VCHAR, EEPIC_HCHAR,
EEPIC_VTIC, EEPIC_HTIC, options_null, EEPIC_init, EEPIC_reset,
EEPIC_text, null_scale, EEPIC_graphics, EEPIC_move, EEPIC_vector,
EEPIC_linetype, EEPIC_put_text, EEPIC_text_angle,
EEPIC_justify_text, EEPIC_point, EEPIC_arrow, set_font_null
TERM_TABLE_END(eepic_driver)
#undef LAST_TERM
#define LAST_TERM eepic_driver
#endif
#endif
#ifdef TERM_HELP
START_HELP(eepic)
"1 eepic",
"?commands set terminal eepic",
"?set terminal eepic",
"?set term eepic",
"?terminal eepic",
"?term eepic",
"?eepic",
" The `eepic` terminal driver supports the extended LaTeX picture environment.",
" It is an alternative to the `latex` driver.",
"",
" The output of this terminal is intended for use with the \"eepic.sty\" macro",
" package for LaTeX. To use it, you need \"eepic.sty\", \"epic.sty\" and a",
" printer driver that supports the \"tpic\" \\specials. If your printer driver",
" doesn't support those \\specials, \"eepicemu.sty\" will enable you to use some",
" of them.",
"",
" Although dotted and dashed lines are possible with `eepic` and are tempting,",
" they do not work well for high-sample-rate curves, fusing the dashes all",
" together into a solid line. For now, the `eepic` driver creates only solid",
" lines. There is another gnuplot driver (`tpic`) that supports dashed lines,",
" but it cannot be used if your DVI driver doesn't support \"tpic\" \\specials.",
"",
" All drivers for LaTeX offer a special way of controlling text positioning:",
" If any text string begins with '{', you also need to include a '}' at the",
" end of the text, and the whole text will be centered both horizontally",
" and vertically by LaTeX. --- If the text string begins with '[', you need",
" to continue it with: a position specification (up to two out of t,b,l,r),",
" ']{', the text itself, and finally, '}'. The text itself may be anything",
" LaTeX can typeset as an LR-box. \\rule{}{}'s may help for best positioning.",
"",
" The `eepic` terminal has no options.",
"",
" Examples:",
" About label positioning:",
" Use gnuplot defaults (mostly sensible, but sometimes not really best):",
" set title '\\LaTeX\\ -- $ \\gamma $'",
" Force centering both horizontally and vertically:",
" set label '{\\LaTeX\\ -- $ \\gamma $}' at 0,0",
" Specify own positioning (top here):",
" set xlabel '[t]{\\LaTeX\\ -- $ \\gamma $}'",
" The other label -- account for long ticlabels:",
" set ylabel '[r]{\\LaTeX\\ -- $ \\gamma $\\rule{7mm}{0pt}'"
END_HELP(eepic)
#endif /* TERM_HELP */