File: [local] / OpenXM_contrib / gnuplot / term / Attic / epson.trm (download)
Revision 1.1.1.2 (vendor branch), Sat Jan 22 14:16:22 2000 UTC (24 years, 7 months ago) by maekawa
Branch: GNUPLOT
CVS Tags: maekawa-ipv6, VERSION_3_7_1, RELEASE_20000124, RELEASE_1_2_2, RELEASE_1_2_1, RELEASE_1_1_3, RELEASE_1_1_2 Changes since 1.1.1.1: +1 -1
lines
Import gnuplot 3.7.1
|
/*
* $Id: epson.trm,v 1.8 1998/12/14 18:38:55 lhecking Exp $
*
*/
/* GNUPLOT - epson.trm */
/*[
* Copyright 1990 - 1993, 1998
*
* Permission to use, copy, and distribute this software and its
* documentation for any purpose with or without fee is hereby granted,
* provided that the above copyright notice appear in all copies and
* that both that copyright notice and this permission notice appear
* in supporting documentation.
*
* Permission to modify the software is granted, but not the right to
* distribute the complete modified source code. Modifications are to
* be distributed as patches to the released version. Permission to
* distribute binaries produced by compiling modified sources is granted,
* provided you
* 1. distribute the corresponding source modifications from the
* released version in the form of a patch file along with the binaries,
* 2. add special version identification to distinguish your version
* in addition to the base release version number,
* 3. provide your name and address as the primary contact for the
* support of your modified version, and
* 4. retain our contact information in regard to use of the base
* software.
* Permission to distribute the released version of the source code along
* with corresponding source modifications in the form of a patch file is
* granted with same provisions 2 through 4 for binary distributions.
*
* This software is provided "as is" without express or implied warranty
* to the extent permitted by applicable law.
]*/
/*
* This file is included by ../term.c.
*
* This terminal driver supports:
* epson_lx800, nec_cp6, starc,
* epson_60dpi, tandy_60dpi
* epson_180dpi
*
* AUTHORS
* Russell Lang
* William Wilson
*
* send your comments or suggestions to (info-gnuplot@dartmouth.edu).
*
*/
/*
* adapted to the new terminal layout by Stefan Bodewig (1995)
*/
#include "driver.h"
#ifdef TERM_REGISTER
#ifdef EPS180
register_term(epson_180dpi)
#endif /* EPS180 */
#ifdef EPS60
register_term(epson_60dpi)
#endif /* EPS60 */
#ifdef EPSONP
register_term(epson_lx800)
#endif /* EPSONP */
#ifdef NEC
register_term(nec_cp6)
#endif /* NEC */
#ifdef OKIDATA
register_term(okidata)
#endif /* OKIDATA */
#ifdef STARC
register_term(starc)
#endif /* STARC */
#ifdef TAMDY60
register_term(tandy_60dpi)
#endif /* TANDY60 */
#endif /* TERM_REGISTER */
#ifdef TERM_PROTO
#if defined(EPS180) || defined(EPS60) || defined(EPSONP) || defined(TANDY60) || defined(OKIDATA)
TERM_PUBLIC void EPSONinit __PROTO((void));
TERM_PUBLIC void EPSONreset __PROTO((void));
#define EPSONlinetype b_setlinetype
#define EPSONmove b_move
#define EPSONvector b_vector
#define EPSONput_text b_put_text
#define EPSON_text_angle b_text_angle
#if defined(EPS60) || defined(EPSONP) || defined(TANDY60) || defined(OKIDATA)
#define EPSONVCHAR FNT5X9_VCHAR
#define EPSONHCHAR FNT5X9_HCHAR
#define EPSONVTIC 6
#define EPSONHTIC 6
#ifdef EPSONP
#define EPSONXMAX 512
#define EPSONYMAX 384
TERM_PUBLIC void EPSONgraphics __PROTO((void));
TERM_PUBLIC void EPSONtext __PROTO((void));
#endif /* EPSONP */
#endif /* four drivers */
#endif /* all five */
#ifdef EPS180
TERM_PUBLIC void EPS180graphics __PROTO((void));
TERM_PUBLIC void EPS180text __PROTO((void));
#define EPSON180VCHAR FNT13X25_VCHAR
#define EPSON180HCHAR FNT13X25_HCHAR
#define EPSON180VTIC 18
#define EPSON180HTIC 18
/* make the total dimensions 8 inches by 6 inches */
#define EPS180XMAX 1260
#define EPS180YMAX 1080
#endif /* EPS180 */
#if defined(EPS60) || defined(TANDY60) || defined(OKIDATA)
/* make the total dimensions 8 inches by 5 inches */
#define EPS60XMAX 480
#define EPS60YMAX 360
TERM_PUBLIC void EPS60graphics __PROTO((void));
#ifdef TANDY60
TERM_PUBLIC void TANDY60text __PROTO((void));
#endif /* TANDY60 */
#ifdef OKIDATA
TERM_PUBLIC void OKIDATAtext __PROTO((void));
#endif /* OKIDATA */
#ifdef EPS60
TERM_PUBLIC void EPS60text __PROTO((void));
#endif /* EPS60 */
#endif /* all three */
#ifdef NEC
TERM_PUBLIC void NECoptions __PROTO((void));
TERM_PUBLIC void NECinit __PROTO((void));
TERM_PUBLIC void NECgraphics __PROTO((void));
TERM_PUBLIC void NECtext __PROTO((void));
TERM_PUBLIC void NEClinetype __PROTO((int linetype));
TERM_PUBLIC void NECreset __PROTO((void));
#define NECmove b_move
#define NECvector b_vector
#define NECput_text b_put_text
#define NEC_text_angle b_text_angle
#define NECXMAX 400
#define NECYMAX 320
#define NECVCHAR FNT5X9_VCHAR
#define NECHCHAR FNT5X9_HCHAR
#define NECVTIC 6
#define NECHTIC 6
#endif /* NEC */
#ifdef STARC
TERM_PUBLIC void STARCinit __PROTO((void));
TERM_PUBLIC void STARCgraphics __PROTO((void));
TERM_PUBLIC void STARCtext __PROTO((void));
TERM_PUBLIC void STARClinetype __PROTO((int linetype));
TERM_PUBLIC void STARCreset __PROTO((void));
#define STARCmove b_move
#define STARCvector b_vector
#define STARCput_text b_put_text
#define STARC_text_angle b_text_angle
#define STARCXMAX 512
#define STARCYMAX 384
#define STARCVCHAR FNT5X9_VCHAR
#define STARCHCHAR FNT5X9_HCHAR
#define STARCVTIC 6
#define STARCHTIC 6
#endif /* STARC */
#endif /* TERM_PROTO */
#ifndef TERM_PROTO_ONLY
#ifdef TERM_BODY
#ifdef EPSONP
/* The following epson lx800 driver uses generic bit mapped graphics
routines to build up a bit map in memory. */
/* by Russell Lang, rjl@monu1.cc.monash.edu.au */
/* On PC, print using 'copy file /b lpt1:', do NOT use 'print' */
/* EPSON_init changes gpoutfile to binary mode on PC's */
void epson_dump __PROTO((void));
#define EPSONXLAST (EPSONXMAX - 1)
#define EPSONYLAST (EPSONYMAX - 1)
TERM_PUBLIC void EPSONinit()
{
}
TERM_PUBLIC void EPSONgraphics()
{
b_charsize(FNT5X9);
b_makebitmap((unsigned int) (EPSONXMAX * xsize),
(unsigned int) (EPSONYMAX * ysize), 1);
}
TERM_PUBLIC void EPSONtext()
{
epson_dump();
b_freebitmap();
}
TERM_PUBLIC void EPSONreset()
{
#ifdef VMS
fflush_binary();
#endif
}
/* output file must be binary mode for epson_dump */
void epson_dump()
{
register unsigned int x;
int j;
for (j = (b_ysize / 8) - 1; j >= 0; j--) {
/* select plotter graphics mode (square pixels) */
fputs("\033J\030", gpoutfile); /* line feed 8/72" = 8 dots */
fputs("\r\033*\005", gpoutfile);
(void) fputc((char) (b_xsize % 256), gpoutfile);
(void) fputc((char) (b_xsize / 256), gpoutfile);
for (x = 0; x < b_xsize; x++) {
(void) fputc((char) (*((*b_p)[j] + x)), gpoutfile);
}
}
#ifdef PC
fputs("Print using: COPY /B\n", stderr);
#endif
}
#endif /* EPSONP */
/* The following NEC CP6 Pinwriter driver uses generic bit mapped graphics
routines to build up a bit map in memory. */
/* by Russell Lang, rjl@monu1.cc.monash.edu.au */
/* On PC, print using 'copy file /b lpt1:', do NOT use 'print' */
/* NECinit changes gpoutfile to binary mode for PC's */
/* Add a Monochrome NEC printer (for faster speed and line types) jdc */
#ifdef NEC
void nec_dump __PROTO((void));
void nec_draft_dump __PROTO((void));
#define NECXLAST (NECXMAX - 1)
#define NECYLAST (NECYMAX - 1)
/* plane 0=black, 1=cyan(blue), 2=magenta(red), 3=yellow */
static unsigned int neccolor[] = { 1, 8, 4, 2, 10, 12, 6, 14 };
static unsigned int necpcolor[] = { 0, 2, 1, 4 };
static int NECmode;
TERM_PUBLIC void NECoptions()
{
if (END_OF_COMMAND) {
strcpy(term_options, "monochrome");
NECmode = 'm';
} else if (almost_equals(c_token, "m$onochrome")) {
c_token++;
strcpy(term_options, "monochrome");
NECmode = 'm';
} else if (almost_equals(c_token, "c$olor")
|| almost_equals(c_token, "c$olour")) {
c_token++;
strcpy(term_options, "color");
NECmode = 'c';
} else if (almost_equals(c_token, "d$raft")) {
c_token++;
strcpy(term_options, "draft");
NECmode = 'd';
} else {
/* error, but since the terminal is already set, default to mono */
strcpy(term_options, "monochrome");
NECmode = 'm';
int_error("modes: color, monochrome, draft", c_token);
}
}
TERM_PUBLIC void NECinit()
{
}
TERM_PUBLIC void NECgraphics()
{
b_charsize(FNT5X9);
b_makebitmap((unsigned int) (NECXMAX * xsize),
(unsigned int) (NECYMAX * ysize), (NECmode == 'c' ? 4 : 1));
}
TERM_PUBLIC void NECtext()
{
if (NECmode == 'd') {
nec_draft_dump();
} else {
nec_dump();
}
b_freebitmap();
}
TERM_PUBLIC void NEClinetype(linetype)
int linetype;
{
if (NECmode == 'c') {
if (linetype >= 6)
linetype %= 6;
b_setvalue(neccolor[linetype + 2]);
} else {
b_setlinetype(linetype);
}
}
TERM_PUBLIC void NECreset()
{
#ifdef VMS
fflush_binary();
#endif
}
/* output file must be binary mode for nec_dump */
void nec_dump()
{
unsigned int x;
unsigned int plane, offset;
int j;
unsigned int column8;
unsigned long column24;
char column3, column2, column1;
fputs("\033P\033l\005", gpoutfile); /* 10cpi, left margin 5 char */
for (j = (b_ysize / 8) - 1; j >= 0; j--) {
fputs("\033J\030", gpoutfile); /* 24/180" line feed */
for (plane = 0; plane < b_planes; plane++) {
offset = plane * b_psize;
if (b_planes > 1) {
/* select colour for plane */
fputs("\033r", gpoutfile);
(void) fputc((char) necpcolor[plane], gpoutfile);
}
/* select plotter graphics mode (square pixels) */
fputs("\r\033*\047", gpoutfile);
(void) fputc((char) ((b_xsize * 3) % 256), gpoutfile);
(void) fputc((char) ((b_xsize * 3) / 256), gpoutfile);
for (x = 0; x < b_xsize; x++) {
column8 = (unsigned int) (*((*b_p)[j + offset] + x));
column24 = 0;
if (column8 & 0x01)
column24 |= (long) 0x000007;
if (column8 & 0x02)
column24 |= (long) 0x000038;
if (column8 & 0x04)
column24 |= (long) 0x0001c0;
if (column8 & 0x08)
column24 |= (long) 0x000e00;
if (column8 & 0x10)
column24 |= (long) 0x007000;
if (column8 & 0x20)
column24 |= (long) 0x038000;
if (column8 & 0x40)
column24 |= (long) 0x1c0000;
if (column8 & 0x80)
column24 |= (long) 0xe00000;
column1 = (char) (column24 & (long) 0xff);
column2 = (char) ((column24 >> 8) & (long) 0xff);
column3 = (char) ((column24 >> 16) & (long) 0xff);
(void) fputc(column3, gpoutfile);
(void) fputc(column2, gpoutfile);
(void) fputc(column1, gpoutfile);
(void) fputc(column3, gpoutfile);
(void) fputc(column2, gpoutfile);
(void) fputc(column1, gpoutfile);
(void) fputc(column3, gpoutfile);
(void) fputc(column2, gpoutfile);
(void) fputc(column1, gpoutfile);
}
}
}
fputs("\r\033l", gpoutfile);
(void) fputc('\0', gpoutfile); /* set left margin to 0 */
if (b_planes > 1) {
fprintf(gpoutfile, "\033r");
(void) fputc('\0', gpoutfile); /* set color to black */
}
#ifdef PC
fputs("Print using: COPY /B\n", stderr);
#endif
#ifdef VMS
fflush_binary();
#endif
}
/* output file must be binary mode for nec_dump */
void nec_draft_dump()
{
unsigned int x;
unsigned int plane, offset;
int j;
fputs("\033P\033l\005\r", gpoutfile); /* 10cpi, left margin 5 char */
for (j = (b_ysize / 8) - 1; j >= 0; j--) {
fputs("\033J\030", gpoutfile); /* 24/180" line feed */
for (plane = 0; plane < b_planes; plane++) {
offset = plane * b_psize;
if (b_planes > 1) {
/* select colour for plane */
fputs("\033r", gpoutfile);
(void) fputc((char) necpcolor[plane], gpoutfile);
}
/* select plotter graphics mode (square pixels) */
fputs("\r\033*", gpoutfile);
(void) fputc('\0', gpoutfile);
(void) fputc((char) (b_xsize % 256), gpoutfile);
(void) fputc((char) (b_xsize / 256), gpoutfile);
for (x = 0; x < b_xsize; x++) {
(void) fputc((char) (*((*b_p)[j + offset] + x)), gpoutfile);
}
}
}
fputs("\r\033l", gpoutfile);
(void) fputc('\0', gpoutfile); /* set left margin to 0 */
if (b_planes > 1) {
fputs("\033r", gpoutfile);
(void) fputc('\0', gpoutfile); /* set color to black */
}
#ifdef PC
fputs("Print using: COPY /B\n", gpoutfile);
#endif
}
#endif /* NEC */
#ifdef STARC
/* The following Star color driver uses generic bit mapped graphics
routines to build up a bit map in memory. */
/* Star Color changes made by William Wilson, wew@naucse.cse.nau.edu */
/* On PC, print using 'copy file /b lpt1:', do NOT use 'print' */
/* STARC_init changes gpoutfile to binary mode on PC's */
void STARC_dump __PROTO((void));
#define STARCXLAST (STARCXMAX - 1)
#define STARCYLAST (STARCYMAX - 1)
/* plane 0=black, 1=cyan(blue), 2=magenta(red), 3=yellow */
static unsigned int STARCcolor[] = { 1, 8, 4, 2, 10, 12, 6, 14 };
static unsigned int STARCpcolor[] = { 0, 2, 1, 4 };
TERM_PUBLIC void STARCinit()
{
}
TERM_PUBLIC void STARCgraphics()
{
b_charsize(FNT5X9);
b_makebitmap((unsigned int) (STARCXMAX * xsize),
(unsigned int) (STARCYMAX * ysize), 4);
}
TERM_PUBLIC void STARCtext()
{
STARC_dump();
b_freebitmap();
}
TERM_PUBLIC void STARClinetype(linetype)
int linetype;
{
if (linetype >= 6)
linetype %= 6;
b_setvalue(STARCcolor[linetype + 2]);
}
TERM_PUBLIC void STARCreset()
{
#ifdef VMS
fflush_binary();
#endif
}
/* output file must be binary mode for STARC_dump */
void STARC_dump()
{
unsigned int x;
unsigned int plane, offset;
int j;
for (j = (b_ysize / 8) - 1; j >= 0; j--) {
fputs("\033J\030", gpoutfile); /* line feed 8/72" = 8 dots */
for (plane = 0; plane < b_planes; plane++) {
offset = plane * b_psize;
if (b_planes > 1) {
/* select colour for plane */
fputs("\033r", gpoutfile);
(void) fputc((char) STARCpcolor[plane], gpoutfile);
}
/* select plotter graphics mode (square pixels) */
fputs("\r\033*\005", gpoutfile);
(void) fputc((char) (b_xsize % 256), gpoutfile);
(void) fputc((char) (b_xsize / 256), gpoutfile);
for (x = 0; x < b_xsize; x++) {
(void) fputc((char) (*((*b_p)[j + offset] + x)), gpoutfile);
}
}
}
if (b_planes > 1) {
fputs("\033r", gpoutfile);
(void) fputc('\0', gpoutfile); /* set color to black */
}
#ifdef PC
fputs("Print using: COPY /B\n", stderr);
#endif
}
#endif /* STARC */
#ifdef EPS180
void eps180_dump __PROTO((void));
#define EPS180XLAST (EPS180XMAX - 1)
#define EPS180YLAST (EPS180YMAX - 1)
TERM_PUBLIC void EPS180graphics()
{
b_charsize(FNT13X25);
b_makebitmap((unsigned int) (EPS180XMAX * xsize),
(unsigned int) (EPS180YMAX * ysize), 1);
}
TERM_PUBLIC void EPS180text()
{
eps180_dump();
b_freebitmap();
}
/* output file must be binary mode for eps180_dump */
void eps180_dump()
{
register unsigned int x;
int j;
/* reset, set line spacing to 24/180", and move left margin */
fputs("\033@\033+\060\033l\005", gpoutfile);
for (j = (b_ysize / 8) - 1; j >= 0;) {
/* select printer graphics mode '39' */
fputs("\r\n\033*'", gpoutfile);
(void) fputc((char) (b_xsize % 256), gpoutfile);
(void) fputc((char) (b_xsize / 256), gpoutfile);
for (x = 0; x < b_xsize; x++) {
(void) fputc((char) (*((*b_p)[j] + x)), gpoutfile);
(void) fputc((char) (*((*b_p)[j - 1] + x)), gpoutfile);
(void) fputc((char) (*((*b_p)[j - 2] + x)), gpoutfile);
}
j -= 3;
}
fputs("\r\n\033@\r\n", gpoutfile); /* reset printer */
#ifdef PC
fputs("Print using: COPY /B\n", stderr);
#endif
}
#endif /* EPS180 */
#ifdef EPS60
void eps60_dump __PROTO((void));
#define EPS60XLAST (EPS60XMAX - 1)
#define EPS60YLAST (EPS60YMAX - 1)
TERM_PUBLIC void EPS60graphics()
{
b_charsize(FNT5X9);
b_makebitmap((unsigned int) (EPS60XMAX * xsize),
(unsigned int) (EPS60YMAX * ysize), 1);
}
TERM_PUBLIC void EPS60text()
{
eps60_dump();
b_freebitmap();
}
/* output file must be binary mode for eps60_dump */
void eps60_dump()
{
register unsigned int x;
int j;
fprintf(gpoutfile, "\033%c\030", '3'); /* set line spacing 24/216" = 8 dots */
for (j = (b_ysize / 8) - 1; j >= 0; j--) {
/* select printer graphics mode 'K' */
fputs("\r\n\033K", gpoutfile);
(void) fputc((char) (b_xsize % 256), gpoutfile);
(void) fputc((char) (b_xsize / 256), gpoutfile);
for (x = 0; x < b_xsize; x++) {
(void) fputc((char) (*((*b_p)[j] + x)), gpoutfile);
}
}
fprintf(gpoutfile, "\033%c\044\r\n", '3'); /* set line spacing 36/216" = 1/6" */
#ifdef PC
fputs("Print using: COPY /B\n", stderr);
#endif
}
#endif /* EPS60 */
#ifdef TANDY60
/* The only difference between TANDY60 and EPS60 is the inclusion
of codes to swap the Tandy printer into IBM mode and back
into Tandy mode. For a Tandy already in IBM mode, use EPS60. */
TERM_PUBLIC void TANDY60text()
{
#ifdef PC
fputs("Inserting Tandy/IBM mode conversion codes\n", stderr);
#endif
/* Switch to IBM mode, and leave 3 inches above the plot so as
to get rough vertical centring on the page. Perform the
centring by setting 1" line feeds and issuing 3 of them. */
fprintf(gpoutfile, "\033!\033%c%c\n\n\n", '3', 216);
eps60_dump();
b_freebitmap();
/* A form feed must be sent before switching back to Tandy mode,
or else the form setting will be messed up. */
fputs("\f\033!", gpoutfile);
}
#endif /* TANDY60 */
#ifdef OKIDATA
void okidata_dump __PROTO((void));
TERM_PUBLIC void OKIDATAtext()
{
okidata_dump();
b_freebitmap();
}
int bitrev_tbl[] =
{
0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff
};
/* output file must be binary mode for okidata_dump */
void okidata_dump()
{
register unsigned int x;
int j;
char cur_char;
int prev_char;
prev_char = 0;
fprintf(gpoutfile, "\033%c%c\020\033*eP:\003", '%', '9'); /* set line spacing 16/144" = 8 dots :Turned on single density graphics mode */
for (j = (b_ysize / 8) - 1; j >= 0; j--) {
fputs("\003\016", gpoutfile);
/* (void) fputc((char)(b_xsize%256),gpoutfile); */
/* (void) fputc((char)(b_xsize/256),gpoutfile); */
for (x = 0; x < b_xsize; x++) {
if ((cur_char = (char)
(bitrev_tbl[(int) (*((*b_p)[j] + x))])) == '\003') {
fputs("\003\003", gpoutfile);
} else {
(void) fputc((char) cur_char, gpoutfile);
}
}
}
fprintf(gpoutfile, "\003\002\033%c%c\030\r\n", '%', '9'); /* Turned off graphics mode: set line spacing 24/144" = 1/6" */
#ifdef PC
fputs("Print using: COPY /B\n", stderr);
#endif
}
#endif /* OKIDATA */
#endif /* TERM_BODY */
#ifdef TERM_TABLE
#ifdef EPS180
TERM_TABLE_START(epson180_driver)
"epson_180dpi", "Epson LQ-style 180-dot per inch (24 pin) printers",
EPS180XMAX, EPS180YMAX, EPSON180VCHAR, EPSON180HCHAR,
EPSON180VTIC, EPSON180HTIC, options_null, EPSONinit, EPSONreset,
EPS180text, null_scale, EPS180graphics, EPSONmove, EPSONvector,
EPSONlinetype, EPSONput_text, EPSON_text_angle,
null_justify_text, do_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(epson180_driver)
#undef LAST_TERM
#define LAST_TERM epson180_driver
#endif /* EPS180 */
#ifdef EPS60
TERM_TABLE_START(epson60_driver)
"epson_60dpi", "Epson-style 60-dot per inch printers",
EPS60XMAX, EPS60YMAX, EPSONVCHAR, EPSONHCHAR,
EPSONVTIC, EPSONHTIC, options_null, EPSONinit, EPSONreset,
EPS60text, null_scale, EPS60graphics, EPSONmove, EPSONvector,
EPSONlinetype, EPSONput_text, EPSON_text_angle,
null_justify_text, do_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(epson60_driver)
#undef LAST_TERM
#define LAST_TERM epson60_driver
#endif /* EPS60 */
#ifdef EPSONP
TERM_TABLE_START(epsonlx_driver)
"epson_lx800", "Epson LX-800, Star NL-10, NX-1000, PROPRINTER ...",
EPSONXMAX, EPSONYMAX, EPSONVCHAR, EPSONHCHAR,
EPSONVTIC, EPSONHTIC, options_null, EPSONinit, EPSONreset,
EPSONtext, null_scale, EPSONgraphics, EPSONmove, EPSONvector,
EPSONlinetype, EPSONput_text, EPSON_text_angle,
null_justify_text, line_and_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(epsonlx_driver)
#undef LAST_TERM
#define LAST_TERM epsonlx_driver
#endif /* EPSONP */
#ifdef NEC
TERM_TABLE_START(nec_driver)
"nec_cp6", "NEC printer CP6, Epson LQ-800 [monocrome color draft]",
NECXMAX, NECYMAX, NECVCHAR, NECHCHAR,
NECVTIC, NECHTIC, NECoptions, NECinit, NECreset,
NECtext, null_scale, NECgraphics, NECmove, NECvector,
NEClinetype, NECput_text, NEC_text_angle,
null_justify_text, line_and_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(nec_driver)
#undef LAST_TERM
#define LAST_TERM nec_driver
#endif /* NEC */
#ifdef OKIDATA
TERM_TABLE_START(okidata_driver)
"okidata", "OKIDATA 320/321 Standard",
EPS60XMAX, EPS60YMAX, EPSONVCHAR, EPSONHCHAR,
EPSONVTIC, EPSONHTIC, options_null, EPSONinit, EPSONreset,
OKIDATAtext, null_scale, EPS60graphics, EPSONmove, EPSONvector,
EPSONlinetype, EPSONput_text, EPSON_text_angle,
null_justify_text, do_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(okidata_driver)
#undef LAST_TERM
#define LAST_TERM okidata_driver
#endif /* OKIDATA */
#ifdef STARC
TERM_TABLE_START(starc_driver)
"starc", "Star Color Printer",
STARCXMAX, STARCYMAX, STARCVCHAR, STARCHCHAR,
STARCVTIC, STARCHTIC, options_null, STARCinit, STARCreset,
STARCtext, null_scale, STARCgraphics, STARCmove, STARCvector,
STARClinetype, STARCput_text, STARC_text_angle,
null_justify_text, line_and_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(starc_driver)
#undef LAST_TERM
#define LAST_TERM starc_driver
#endif /* STARC */
#ifdef TANDY60
TERM_TABLE_START(tandy60_driver)
"tandy_60dpi", "Tandy DMP-130 series 60-dot per inch graphics",
EPS60XMAX, EPS60YMAX, EPSONVCHAR, EPSONHCHAR,
EPSONVTIC, EPSONHTIC, options_null, EPSONinit, EPSONreset,
TANDY60text, null_scale, EPS60graphics, EPSONmove, EPSONvector,
EPSONlinetype, EPSONput_text, EPSON_text_angle,
null_justify_text, do_point, do_arrow, set_font_null, 0, TERM_BINARY
TERM_TABLE_END(tandy60_driver)
#undef LAST_TERM
#define LAST_TERM tandy60_driver
#endif /* TANDY60 */
#endif /* TERM_TABLE */
#endif /* TERM_PROTO_ONLY */
#ifdef TERM_HELP
START_HELP(epson_180dpi)
"1 epson-180dpi",
"?commands set terminal epson-180dpi",
"?set terminal epson-180dpi",
"?set term epson-180dpi",
"?terminal epson-180dpi",
"?term epson-180dpi",
"?epson-180dpi",
"?commands set terminal epson-60dpi",
"?set terminal epson-60dpi",
"?set term epson-60dpi",
"?terminal epson-60dpi",
"?term epson-60dpi",
"?epson-60dpi",
"?commands set terminal epson-lx800",
"?set terminal epson-lx800",
"?set term epson-lx800",
"?terminal epson-lx800",
"?term epson-lx800",
"?epson-lx800",
"?commands set terminal nec-cp6",
"?set terminal nec-cp6",
"?set term nec-cp6",
"?terminal nec-cp6",
"?term nec-cp6",
"?nec-cp6",
"?commands set terminal okidata",
"?set terminal okidata",
"?set term okidata",
"?terminal okidata",
"?term okidata",
"?okidata",
"?commands set terminal starc",
"?set terminal starc",
"?set term starc",
"?terminal starc",
"?term starc",
"?starc",
"?commands set terminal tandy-60dpi",
"?set terminal tandy-60dpi",
"?set term tandy-60dpi",
"?terminal tandy-60dpi",
"?term tandy-60dpi",
"?tandy-60dpi",
" This driver supports a family of Epson printers and derivatives.",
"",
" `epson-180dpi` and `epson-60dpi` are drivers for Epson LQ-style 24-pin",
" printers with resolutions of 180 and 60 dots per inch, respectively.",
"",
" `epson-lx800` is a generic 9-pin driver appropriate for printers like the",
" Epson LX-800, the Star NL-10 and NX-1000, the PROPRINTER, and so forth.",
"",
" `nec-cp6` is generix 24-pin driver that can be used for printers like the",
" NEC CP6 and the Epson LQ-800.",
"",
" The `okidata` driver supports the 9-pin OKIDATA 320/321 Standard printers.",
"",
" The `starc` driver is for the Star Color Printer.",
"",
" The `tandy-60dpi` driver is for the Tandy DMP-130 series of 9-pin, 60-dpi",
" printers.",
"",
" Only `nec-cp6` has any options.",
"",
" Syntax:",
" set terminal nec-cp6 {monochrome | colour | draft}",
"",
" which defaults to monochrome.",
"",
" With each of these drivers, a binary copy is required on a PC to print. Do",
" not use `print`---use instead `copy file /b lpt1:`."
END_HELP(epson_180dpi)
#endif /* TERM_HELP */