/*
* $Id: excl.trm,v 1.9 1998/04/14 00:17:41 drd Exp $
*
*/
/* GNUPLOT - excl.trm */
/* Copyright (c) 1992, 1998 by P. Klosowski at NIST. All Rights Reserved
*
* Permission to use, copy, and distribute this software and its
* documentation for any purpose with or without fee is hereby granted,
* provided that the above copyright notice appear in all copies and
* that both that copyright notice and this permission notice appear
* in supporting documentation.
*
* Permission to modify the software is granted, but not the right to
* distribute the complete modified source code. Modifications are to
* be distributed as patches to the released version. Permission to
* distribute binaries produced by compiling modified sources is granted,
* provided you
* 1. distribute the corresponding source modifications from the
* released version in the form of a patch file along with the binaries,
* 2. add special version identification to distinguish your version
* in addition to the base release version number,
* 3. provide your name and address as the primary contact for the
* support of your modified version, and
* 4. retain our contact information in regard to use of the base
* software.
* Permission to distribute the released version of the source code along
* with corresponding source modifications in the form of a patch file is
* granted with same provisions 2 through 4 for binary distributions.
*
* This software is provided "as is" without express or implied warranty
* to the extent permitted by applicable law.
*
* This file is included by ../term.c.
*
*
* send your comments or suggestions to (info-gnuplot@dartmouth.edu).
*
*/
/***
NAME
quic
PURPOSE
QUIC driver for GNUPLOT
NOTES
HISTORY
przemek - Aug 16, 1992: Created.
lars - Nov 30, 1998: Updated to new gnuplot copyright by
permission from Przemek
***/
/*
c *****************************************
c *****************************************
c ****** *****
c ****** EXCL command definitions *****
c ****** *****
c *****************************************
c *****************************************
*/
/*
* adapted to the new terminal layout by Stefan Bodewig (Dec. 1995)
*/
#include "driver.h"
#ifdef TERM_REGISTER
register_term(excl)
#endif
#ifdef TERM_PROTO
TERM_PUBLIC void EXCL_init __PROTO((void));
TERM_PUBLIC void EXCL_graphics __PROTO((void));
TERM_PUBLIC void EXCL_text __PROTO((void));
TERM_PUBLIC void EXCL_linetype __PROTO((int linetype));
TERM_PUBLIC void EXCL_move __PROTO((unsigned int x, unsigned int y));
TERM_PUBLIC void EXCL_vector __PROTO((unsigned int x2, unsigned int y2));
TERM_PUBLIC void EXCL_put_text __PROTO((unsigned int x, unsigned int y, char str[]));
TERM_PUBLIC void EXCL_reset __PROTO((void));
#define EXCL_XMAX 9000
#define EXCL_YMAX 6500
#define EXCL_XLAST (EXCL_XMAX - 1)
#define EXCL_YLAST (EXCL_YMAX - 1)
#define EXCL_VCHAR 120
#define EXCL_HCHAR 70
#define EXCL_VTIC 70
#define EXCL_HTIC 70
#endif /* TERM_PROTO */
#ifndef TERM_PROTO_ONLY
#ifdef TERM_BODY
/* Define ansi command headers, NUL character */
#define ESC "\033"
#define GS "\035"
#define CSI "\033["
#define DCS "\033P"
#define ST "\033\\"
/*
page numbers are given per "Talaris EXCL programmer's reference manual" M292 rev.2
NOTE: EXCL coordinate system places (0,0) at upper left corner of the page
c EXCL commands for initialization
c TALAMS: set ANSI (p. 162)
c TALMOD: set emulation *** EXCL (p. 164)
c TALPGO: set page orient *** landscape (p. 81)
c TALFCTL: set paper format *** 8.5x11 (p. 85)
c TALTBM: set top/bot margins ** in land mode to full pg (p. 73)
c TALLRM: set left/right margins (p. 75)
c PUM: set units ** units of measure set by TALPRM (p. 67)
c TALASF: Absorb cr/ff/lf/vt ** ON (p. 182)
c TALPOP: pop controller params (p. 168)
c TALPSH: push controller params (p. 167)
c TALPRM: set units of measure ** to 1/1000 inch (p. 64)
c TALGLT: set line type ** solid (p. 211)
c TALORG: set page absolute origin ** (0,0) UL corner (p. 78)
c TALPCW: set page clip window *** for landsc/full page (p. 84)
c TALGLP: line: **pen7x7mil*draw*smear*glyph112*font5279* (p. 208)
c TALGLPE: ending for TALGLP command, forcing DRAW mode
c TALGBB: bounding box; used only by qdrive (p. 207)
c TALFPO: Force page out ** clear bitmap (p. 95)
c TALGDW: graphical draw to hor,vert ** abs coords (p. 212)
c TALGMV: graphical move to hor,vert ** abs coords (p. 213)
*/
#define TALAMS "\033[0*s"
#define TALMOD "\033[1;0r"
#define TALPGO "\033[1;0p"
#define TALFCTL "\033[0;3x"
#define TALTBM "\033[0;8500 v"
#define TALLRM "\033[0;11000v"
#define PUM "\033[11h"
#define TALASF "\033[1 z"
#define TALPOP "\033[*]"
#define TALPSH "\033[*["
#define TALPRM "\033[3y"
#define TALGLT "\033[%s*t"
#define TALORG "\033[0;0o"
#define TALCCNT "\033[1;0u"
#define TALPCW "\033[0;8500;11000;0*c"
#define TALGLP_init "\033[7;7;8;1;112;5279*w"
#define TALGLP "\033[%d;%d;8*w"
#define TALFPO "\033[0*F"
#define TALGDW "\033[0;%d;%d*d"
#define TALGMV "\033[0;%d;%d*m"
/* TALPYL: polyline (p. 222)
** 5;0} list of 16-bit signed integers, encoded, mostly relative
** 5,1} list of ASCII absolute coords (if w/o +- signs)(e.g. 315:1222;)
*/
#define TALPYL "\033P5;1}"
TERM_PUBLIC void EXCL_init()
{
fprintf(gpoutfile, "%s%s%s%s%s%s",
TALPSH, TALAMS, TALMOD, TALCCNT, TALFCTL, TALASF);
/* ^save state ^setEXCL ^PaperSize8.5x11 */
/* ^setANSI ^copyCount1 ^absorbCtlChar */
fprintf(gpoutfile, "%s%s%s%s%s%s",
PUM, TALPRM, TALPGO, TALPCW, TALORG, TALGLP_init);
fprintf(gpoutfile, TALGLT, "");
/* ^setUnits ^landscape ^OriginZero ^SolidLine */
/* ^Units1/1000" ^pageClip ^SetLine */
}
TERM_PUBLIC void EXCL_graphics()
{
}
TERM_PUBLIC void EXCL_text()
{
fputs(TALFPO, gpoutfile);
/* ^pageout */
}
TERM_PUBLIC void EXCL_linetype(linetype)
int linetype;
{
/* excl line widths in mils: 4 is mimimum, but too thin; then
7,10,14,17,20,24,27...
exclpen=MOD(NPEN,8)*7
CSI exclpen; exclpen; TALGLPE
*/
static char *type[2 + 9] =
{
"", "40;40", "", "42;42", "14;21",
/* .... ---- -- -- -- . . . */
"", "49;30", "14;21", "", "49;30", "14;21"
/* same pattern, but thicker.. and thicker */
};
static int width[2+9] = { 14, 7, 7, 7, 7, 10, 10, 10, 17, 17, 17 };
if (linetype >= 9)
linetype %= 9;
fprintf(gpoutfile, TALGLP, width[linetype + 2], width[linetype + 2]);
/* ^width in dots */
fprintf(gpoutfile, TALGLT, type[linetype + 2]);
/* ^line type */
}
TERM_PUBLIC void EXCL_move(x, y)
unsigned int x, y;
{
fprintf(gpoutfile, TALGMV, 1000 + x, EXCL_YLAST + 1000 - y);
/* ^pen up vector */
}
TERM_PUBLIC void EXCL_vector(x2, y2)
unsigned int x2, y2;
{
fprintf(gpoutfile, TALGDW, 1000 + x2, EXCL_YLAST + 1000 - y2);
/* ^pen down vector */
}
TERM_PUBLIC void EXCL_put_text(x, y, str)
unsigned int x, y;
char str[];
{
char ch;
EXCL_move(x, y - EXCL_VCHAR / 3);
ch = *str++;
while (ch != NUL) {
putc(ch, gpoutfile);
ch = *str++;
}
}
TERM_PUBLIC void EXCL_reset()
{
fprintf(gpoutfile, "%s%s", TALFPO, TALPOP);
/* ^pageout ^pop */
}
#endif /* TERM_BODY */
#ifdef TERM_TABLE
TERM_TABLE_START(excl_driver)
"excl", "Talaris EXCL Laser printer (also Talaris 1590 and others)",
EXCL_XMAX, EXCL_YMAX, EXCL_VCHAR, EXCL_HCHAR,
EXCL_VTIC, EXCL_HTIC, options_null, EXCL_init, EXCL_reset,
EXCL_text, null_scale, EXCL_graphics, EXCL_move, EXCL_vector,
EXCL_linetype, EXCL_put_text, null_text_angle,
null_justify_text, line_and_point, do_arrow, set_font_null
TERM_TABLE_END(excl_driver)
#undef LAST_TERM
#define LAST_TERM excl_driver
#endif /* TERM_TABLE */
#endif /* TERM_PROTO_ONLY */
#ifdef TERM_HELP
START_HELP(excl)
"1 excl",
"?commands set terminal excl",
"?set terminal excl",
"?set term excl",
"?terminal excl",
"?term excl",
"?excl",
" The `excl` terminal driver supports Talaris printers such as the EXCL Laser",
" printer and the 1590. It has no options."
END_HELP(excl)
#endif