=================================================================== RCS file: /home/cvs/OpenXM_contrib/gnuplot/term/Attic/fig.trm,v retrieving revision 1.1 retrieving revision 1.1.1.3 diff -u -p -r1.1 -r1.1.1.3 --- OpenXM_contrib/gnuplot/term/Attic/fig.trm 2000/01/09 17:01:13 1.1 +++ OpenXM_contrib/gnuplot/term/Attic/fig.trm 2003/09/15 07:09:36 1.1.1.3 @@ -1,5 +1,5 @@ /* - * $Id: fig.trm,v 1.1 2000/01/09 17:01:13 maekawa Exp $ + * $Id: fig.trm,v 1.1.1.3 2003/09/15 07:09:36 ohara Exp $ */ /* GNUPLOT - fig.trm */ @@ -93,31 +93,48 @@ TERM_PUBLIC void FIG_lpoint __PROTO((unsigned int x, u #define FIG_DEFAULT DEFAULT #define FIG_ROMAN_FONT (0) /* actually, the default font */ -#ifndef FIG_RES -/* This is now 1200 per inch */ -#define FIG_RES (1200) +#if METRIC +# define INCH FALSE +#else +# define INCH TRUE #endif +/* These should not be defined elsewhere - ACZ */ +/* This is now 1200 per inch */ +#define FIG_IRES (1200) +/* This is now 450 per cm */ +#define FIG_MRES (450) + #define FIG_COORD_SYS 2 #define FIG_ORIENT (FIG_portrait?"Portrait":"Landscape") /* Could be "Portrait" */ -#define FIG_JUST "Center" +#define FIG_JUST "Center" /* Could be "Flush Left" */ #define FIG_UNIT (FIG_inches?"Inches":"Metric") /* Could be "Inches" */ +#define FIG_PAPER (FIG_inches ? "Letter" : "A4") +#define FIG_MAGNIFICATION 100.0 +#define FIG_MULTIPAGE "Single" +/* Could be "Multiple" */ +#define FIG_TRANSCOLOR -2 +/* none: -2; background: -1; 0..31: foreground colors */ +/* This could probably be dropped with the support of GIFs. */ +#define FIG_TRUERES (FIG_inches ? FIG_IRES : FIG_MRES) /* ACZ */ -#define FIG_MAGIC "#FIG 3.1" -#define FIG_HTIC (5*FIG_RES/80) -#define FIG_VTIC (5*FIG_RES/80) +#define FIG_MAGIC "#FIG 3.2" /* new file format - ACZ */ +#define FIG_HTIC(inch) ((inch) ? (5*FIG_IRES)/80 : (15*FIG_MRES)/100) +#define FIG_VTIC(inch) ((inch) ? (5*FIG_IRES)/80 : (15*FIG_MRES)/100) #define FIG_FONT_S (10) /* size in points */ #define FIG_MAX_POINTS 99999L /* almost infinite ;-) */ -#define FIG_to_pixel_v(s) ((s)*FIG_RES/72*3/4) /* height of font in pixels */ +/* height of font in pixels: */ +#define FIG_to_pixel_v(inch,s) (((inch) ? (s)*FIG_IRES : (s)*FIG_MRES*2.54) / 72 * 3/4) /* This is fudged to enlarge the drawing area, but gives fairly good results */ -#define FIG_to_pixel_h(s) (FIG_to_pixel_v(s)*6/10) /* this is a guess at the width */ +/* this is a guess at the width: */ +#define FIG_to_pixel_h(inch,s) (FIG_to_pixel_v(inch,s)*6/10) -#define FIG_VCHAR FIG_to_pixel_v(FIG_FONT_S) /* just for default, */ -#define FIG_HCHAR FIG_to_pixel_h(FIG_FONT_S) /* not really used */ +#define FIG_VCHAR FIG_to_pixel_v(INCH,FIG_FONT_S) /* just for default, */ +#define FIG_HCHAR FIG_to_pixel_h(INCH,FIG_FONT_S) /* not really used */ enum FIG_poly_stat { FIG_poly_new, FIG_poly_part @@ -140,29 +157,29 @@ static int FIG_poly_vec_max = 999; /* JFS */ static enum FIG_poly_stat FIG_polyvec_stat; /* 5 inches wide by 3 inches high */ -#define FIG_XMAX (5 * FIG_RES) -#define FIG_YMAX (3 * FIG_RES) +#define FIG_XMAX(inch) ((inch) ? 5*FIG_IRES : 12*FIG_MRES) +#define FIG_YMAX(inch) ((inch) ? 3*FIG_IRES : 8*FIG_MRES) -#define FIG_XOFF (FIG_RES/4) -#define FIG_YOFF (FIG_RES/4) +#define FIG_XOFF(inch) ((inch) ? FIG_IRES : 2*FIG_MRES) +#define FIG_YOFF(inch) ((inch) ? FIG_IRES : 2*FIG_MRES) -#define BFIG_HTIC (7*FIG_RES/80) -#define BFIG_VTIC (7*FIG_RES/80) +#define BFIG_HTIC(inch) ((inch) ? (7*FIG_IRES)/80 : (20*FIG_MRES)/100) +#define BFIG_VTIC(inch) ((inch) ? (7*FIG_IRES)/80 : (20*FIG_MRES)/100) #define BFIG_FONT_S (16) /* size in points */ -#define BFIG_VCHAR FIG_to_pixel_v(BFIG_FONT_S) /* height in pixels of font */ -#define BFIG_HCHAR FIG_to_pixel_h(BFIG_FONT_S) /* this is a guess at the width */ +#define BFIG_VCHAR FIG_to_pixel_v(INCH,BFIG_FONT_S) /* height in pixels of font */ +#define BFIG_HCHAR FIG_to_pixel_h(INCH,BFIG_FONT_S) /* this is a guess at the width */ static F_point *FIG_points = NULL; /* Array for the collection of points for POLYLINE, allocated on demand. */ static F_line FIG_line; /* 8 inches wide by 5 inches high */ -#define BFIG_XMAX (8 * FIG_RES) -#define BFIG_YMAX (5 * FIG_RES) +#define BFIG_XMAX(inch) ((inch) ? 8*FIG_IRES : 20*FIG_MRES) +#define BFIG_YMAX(inch) ((inch) ? 5*FIG_IRES : 15*FIG_MRES) -#define BFIG_XOFF (FIG_RES/2) -#define BFIG_YOFF (FIG_RES/2) +#define BFIG_XOFF(inch) ((inch) ? FIG_IRES : 2*FIG_MRES) +#define BFIG_YOFF(inch) ((inch) ? FIG_IRES : 2*FIG_MRES) static int FIG_type; /* negative types use real lines */ @@ -172,11 +189,11 @@ static float FIG_angle; /* Fig text angle 0=horiz, Pi static int FIG_use_color = FALSE; /* do we use color or not? */ static int FIG_is_big = FALSE; /* big plot ? */ static int FIG_color = DEFAULT; /* which color to use */ -static int FIG_xoff = FIG_XOFF; -static int FIG_yoff = FIG_YOFF; +static int FIG_xoff = FIG_XOFF(INCH); +static int FIG_yoff = FIG_YOFF(INCH); static int FIG_font_s = FIG_FONT_S; static int FIG_portrait = FALSE; -static int FIG_inches = FALSE; +static int FIG_inches = INCH; static void FIG_poly_clean __PROTO((enum FIG_poly_stat fig_stat)); @@ -235,11 +252,7 @@ TERM_PUBLIC void FIG_options() FIG_font_s = 0; FIG_default_thickness = 1; xsize_t = ysize_t = 0.; -#if METRIC - FIG_inches = FALSE; -#else - FIG_inches = TRUE; -#endif + FIG_inches = INCH; while (!END_OF_COMMAND) { if (almost_equals(c_token, "mo$nochrome")) { FIG_use_color = FALSE; @@ -366,21 +379,21 @@ TERM_PUBLIC void FIG_options() if (!FIG_is_big) { if (FIG_font_s == 0) /* KB */ FIG_font_s = FIG_FONT_S; - term->xmax = FIG_XMAX; - term->ymax = FIG_YMAX; - term->v_tic = FIG_VTIC; - term->h_tic = FIG_HTIC; - FIG_xoff = FIG_XOFF; - FIG_yoff = FIG_YOFF; + term->xmax = FIG_XMAX(FIG_inches); + term->ymax = FIG_YMAX(FIG_inches); + term->v_tic = FIG_VTIC(FIG_inches); + term->h_tic = FIG_HTIC(FIG_inches); + FIG_xoff = FIG_XOFF(FIG_inches); + FIG_yoff = FIG_YOFF(FIG_inches); } else { if (FIG_font_s == 0) /* KB */ FIG_font_s = BFIG_FONT_S; - term->xmax = BFIG_XMAX; - term->ymax = BFIG_YMAX; - term->v_tic = BFIG_VTIC; - term->h_tic = BFIG_HTIC; - FIG_xoff = BFIG_XOFF; - FIG_yoff = BFIG_YOFF; + term->xmax = BFIG_XMAX(FIG_inches); + term->ymax = BFIG_YMAX(FIG_inches); + term->v_tic = BFIG_VTIC(FIG_inches); + term->h_tic = BFIG_HTIC(FIG_inches); + FIG_xoff = BFIG_XOFF(FIG_inches); + FIG_yoff = BFIG_YOFF(FIG_inches); } if (FIG_portrait) { /* KB */ tmax_t = term->xmax; @@ -388,16 +401,11 @@ TERM_PUBLIC void FIG_options() term->ymax = tmax_t; } if (xsize_t > 0. && ysize_t > 0.) { - if (FIG_inches) { - term->xmax = (unsigned int) (xsize_t * FIG_RES); - term->ymax = (unsigned int) (ysize_t * FIG_RES); - } else { - term->xmax = (unsigned int) (xsize_t / 2.54 * FIG_RES); - term->ymax = (unsigned int) (ysize_t / 2.54 * FIG_RES); - } + term->xmax = (unsigned int) (xsize_t * FIG_TRUERES); + term->ymax = (unsigned int) (ysize_t * FIG_TRUERES); } - term->v_char = FIG_to_pixel_v(FIG_font_s); - term->h_char = FIG_to_pixel_h(FIG_font_s); + term->v_char = FIG_to_pixel_v(FIG_inches, FIG_font_s); + term->h_char = FIG_to_pixel_h(FIG_inches, FIG_font_s); FIG_thickness = FIG_default_thickness; if (parse_error) { /* JFS, KB */ int_error(options_list, c_token); @@ -431,10 +439,15 @@ TERM_PUBLIC void FIG_init() fprintf(gpoutfile, "\ %s\n\ -%s\n%s\n%s\n%d %d\n", +%s\n%s\n\ +%s\n%s\n\ +%.2f\n%s\n%d\n\ +%d %d\n", FIG_MAGIC, FIG_ORIENT, FIG_JUST, - FIG_UNIT, FIG_RES, FIG_COORD_SYS); + FIG_UNIT, FIG_PAPER, + FIG_MAGNIFICATION, FIG_MULTIPAGE, FIG_TRANSCOLOR, + FIG_IRES, FIG_COORD_SYS); } @@ -614,15 +627,27 @@ TERM_PUBLIC void FIG_put_text(x, y, str) unsigned int x, y; char *str; { + int has_latex_command = 0; + if (strlen(str) == 0) return; FIG_poly_clean(FIG_polyvec_stat); - y -= term->v_char / 2; /* assuming vertical center justified */ + if(FIG_angle != 0.0) + x += term->v_char / 2; /* assuming horizontally center justified */ + else + y -= term->v_char / 2; /* assuming vertical center justified */ + /* + * gnuplot used to create SPECIAL_TEXT for all text strings, but this + * is only really needed if str contains LaTeX commands. we assume that + * a string contains LaTeX commands if it contains a backslash. + */ + if (strchr(str,'\\')) + has_latex_command = SPECIAL_TEXT; fprintf(gpoutfile, "%d %d %d %d %d %d %6.3f %6.3f %d %6.3f %6.3f %d %d %s\\001\n", - O_TEXT, FIG_justify, FIG_color, 0, FIG_DEFAULT, + OBJ_TEXT, FIG_justify, FIG_color, 0, FIG_DEFAULT, FIG_ROMAN_FONT, (float) FIG_font_s, - FIG_angle, SPECIAL_TEXT, (float) term->v_char, + FIG_angle, has_latex_command, (float) term->v_char, (float) term->h_char * strlen(str), FIG_xoff + x, term->ymax + FIG_yoff - y, str); } @@ -653,7 +678,7 @@ TERM_PUBLIC int FIG_text_angle(ang) int ang; { if (ang) - FIG_angle = Pi / 2.0; /* vertical is pi/2 radians */ + FIG_angle = M_PI_2; /* vertical is pi/2 radians */ else FIG_angle = 0.0; /* horizontal */ return (TRUE); @@ -763,9 +788,9 @@ TERM_PUBLIC void FIG_reset() #ifdef TERM_TABLE TERM_TABLE_START(fig_driver) - "fig", "FIG 3.1 graphics language: X graphics editor", - FIG_XMAX, FIG_YMAX, FIG_VCHAR, FIG_HCHAR, - FIG_VTIC, FIG_HTIC, FIG_options, FIG_init, FIG_reset, + "fig", "FIG 3.2 graphics language: X graphics editor", + FIG_XMAX(INCH), FIG_YMAX(INCH), FIG_VCHAR, FIG_HCHAR, + FIG_VTIC(INCH), FIG_HTIC(INCH), FIG_options, FIG_init, FIG_reset, FIG_text, null_scale, FIG_graphics, FIG_move, FIG_vector, FIG_linetype, FIG_put_text, FIG_text_angle, FIG_justify_text, FIG_lpoint, FIG_arrow, set_font_null, FIG_pointsize, @@ -812,7 +837,7 @@ START_HELP(fig) "", " `thickness` sets the default line thickness, which is 1 if not specified.", " Overriding the thickness can be achieved by adding a multiple of 100 to the", -" to the `linetype` value for a `plot` command. In a similar way the `depth`", +" `linetype` value for a `plot` command. In a similar way the `depth`", " of plot elements (with respect to the default depth) can be controlled by", " adding a multiple of 1000 to . The depth is then +", " /1000 and the thickness is (%1000)/100 or, if that is",