File: [local] / OpenXM_contrib / gnuplot / term / Attic / gpic.trm (download)
Revision 1.1.1.2 (vendor branch), Sat Jan 22 14:16:23 2000 UTC (24 years, 7 months ago) by maekawa
Branch: GNUPLOT
CVS Tags: maekawa-ipv6, VERSION_3_7_1, RELEASE_20000124, RELEASE_1_2_2, RELEASE_1_2_1, RELEASE_1_1_3, RELEASE_1_1_2 Changes since 1.1.1.1: +1 -1
lines
Import gnuplot 3.7.1
|
/*
* $Id: gpic.trm,v 1.7 1998/12/14 18:39:28 lhecking Exp $
*/
/* GNUPLOT - gpic.trm -*-C-*- */
/*[
* Copyright 1993, 1998
*
* Permission to use, copy, and distribute this software and its
* documentation for any purpose with or without fee is hereby granted,
* provided that the above copyright notice appear in all copies and
* that both that copyright notice and this permission notice appear
* in supporting documentation.
*
* Permission to modify the software is granted, but not the right to
* distribute the complete modified source code. Modifications are to
* be distributed as patches to the released version. Permission to
* distribute binaries produced by compiling modified sources is granted,
* provided you
* 1. distribute the corresponding source modifications from the
* released version in the form of a patch file along with the binaries,
* 2. add special version identification to distinguish your version
* in addition to the base release version number,
* 3. provide your name and address as the primary contact for the
* support of your modified version, and
* 4. retain our contact information in regard to use of the base
* software.
* Permission to distribute the released version of the source code along
* with corresponding source modifications in the form of a patch file is
* granted with same provisions 2 through 4 for binary distributions.
*
* This software is provided "as is" without express or implied warranty
* to the extent permitted by applicable law.
]*/
/*
* This file is included by ../term.c.
*/
/*
* This terminal driver supports:
* The GPIC graphics language for groff
*
* AUTHOR
* Sigfrid Lundberg
*
* send your comments or suggestions to (siglun@volterra.teorekol.lu.se).
*
*/
/*
* adapted to the new terminal layout by Stefan Bodewig (Dec. 1995)
*/
#include "driver.h"
#ifdef TERM_REGISTER
register_term(gpic)
#endif
#ifdef TERM_PROTO
TERM_PUBLIC void GPIC_options __PROTO((void));
TERM_PUBLIC void GPIC_init __PROTO((void));
TERM_PUBLIC void GPIC_graphics __PROTO((void));
TERM_PUBLIC void GPIC_text __PROTO((void));
TERM_PUBLIC void GPIC_linetype __PROTO((int linetype));
TERM_PUBLIC void GPIC_move __PROTO((unsigned int x, unsigned int y));
TERM_PUBLIC void GPIC_vector __PROTO((unsigned int ux, unsigned int uy));
TERM_PUBLIC void GPIC_arrow __PROTO((unsigned int sx, unsigned int sy,
unsigned int ex, unsigned int ey,
TBOOLEAN head));
TERM_PUBLIC void GPIC_put_text __PROTO((unsigned int x, unsigned int y,
char str[]));
TERM_PUBLIC int GPIC_justify_text __PROTO((enum JUSTIFY mode));
TERM_PUBLIC int GPIC_text_angle __PROTO((int ang));
TERM_PUBLIC void GPIC_reset __PROTO((void));
#define GPIC_DOTS_PER_INCH (300)
/* 5 inches wide by 3 inches high (default) */
#define GPIC_XMAX (5*GPIC_DOTS_PER_INCH)
#define GPIC_YMAX (3*GPIC_DOTS_PER_INCH)
#define GPIC_HTIC (5*GPIC_DOTS_PER_INCH/72)
#define GPIC_VTIC (5*GPIC_DOTS_PER_INCH/72)
#define GPIC_HCHAR (GPIC_DOTS_PER_INCH*53/10/72)
#define GPIC_VCHAR (GPIC_DOTS_PER_INCH*11/72)
#endif /* TERM_PROTO */
#ifndef TERM_PROTO_ONLY
#ifdef TERM_BODY
#define GPIC_PTS_PER_INCH (72.27)
/* dot size in pt */
#define GPIC_UNIT (GPIC_PTS_PER_INCH/GPIC_DOTS_PER_INCH)
#define GPIC_coord(x) ((float)x)/((float)GPIC_DOTS_PER_INCH)
void GPIC_close_line __PROTO((void));
static float GPIC_x, GPIC_y;
static unsigned int GPIC_ltype;
enum JUSTIFY GPIC_justify = LEFT;
/* for DOTS point style */
static char *GPIC_lines[] =
{
"thickness 1.0", /* -2 border */
"", /* -1 axes */
"", /* 0 solid thin */
"dotted",
"dashed 0.05", /* 1 solid thick */
"dashed 0.075", /* 2 solid Thick */
};
/* number of linetypes above */
#define GPIC_NUMLINES (sizeof(GPIC_lines)/sizeof(char *))
static int GPIC_linecount = 0; /* number of points in line so far */
TERM_PUBLIC void GPIC_options()
{
float x, y;
struct value a;
GPIC_x = 0;
GPIC_y = 0;
if (!END_OF_COMMAND) {
x = real(const_express(&a));
if (!END_OF_COMMAND) {
y = real(const_express(&a));
GPIC_x = x;
GPIC_y = y;
}
}
sprintf(term_options, "Origin is at (%f,%f)", GPIC_x, GPIC_y);
}
TERM_PUBLIC void GPIC_init()
{
GPIC_linetype(-1);
fputs(".\\\"GNUPLOT: GROFF picture using the gpic preprocessor\n", gpoutfile);
}
TERM_PUBLIC void GPIC_graphics()
{
register struct termentry *t = term;
fprintf(gpoutfile, ".PS %f %f\n", GPIC_coord(t->xmax),
GPIC_coord(t->ymax));
fprintf(gpoutfile, "x=%f; y=%f\n", GPIC_x, GPIC_y);
}
TERM_PUBLIC void GPIC_text()
{
GPIC_close_line();
fputs(".PE\n", gpoutfile);
}
TERM_PUBLIC void GPIC_linetype(linetype)
int linetype;
{
if (linetype >= GPIC_NUMLINES - 2)
linetype %= (GPIC_NUMLINES - 2);
GPIC_ltype = linetype;
}
void GPIC_close_line()
{
if (GPIC_linecount > 0) {
fputs("; reset linewid\n", gpoutfile);
GPIC_linecount = 0;
}
}
TERM_PUBLIC void GPIC_move(x, y)
unsigned int x, y;
{
GPIC_close_line();
fprintf(gpoutfile, "move to (x+%f,y+%f)\n", GPIC_coord(x), GPIC_coord(y));
GPIC_linecount = 1;
}
TERM_PUBLIC void GPIC_vector(ux, uy)
unsigned int ux, uy;
{
if (GPIC_linecount == 1) {
fprintf(gpoutfile, "line %s to (x+%f,y+%f)",
GPIC_lines[GPIC_ltype + 2],
GPIC_coord(ux), GPIC_coord(uy));
} else {
fprintf(gpoutfile, "\
\\\n\
then to (x+%f,y+%f)",
GPIC_coord(ux), GPIC_coord(uy));
}
GPIC_linecount++;
}
TERM_PUBLIC void GPIC_arrow(sx, sy, ex, ey, head)
unsigned int sx, sy, ex, ey;
TBOOLEAN head;
{
GPIC_close_line();
if (head) {
fprintf(gpoutfile, "arrowhead=7; arrow from x+%f,y+%f to x+%f,y+%f\n",
GPIC_coord(sx), GPIC_coord(sy), GPIC_coord(ex), GPIC_coord(ey));
} else {
fprintf(gpoutfile, "line from x+%f,y+%f to x+%f,y+%f\n",
GPIC_coord(sx), GPIC_coord(sy), GPIC_coord(ex), GPIC_coord(ey));
}
}
TERM_PUBLIC void GPIC_put_text(x, y, str)
unsigned int x, y; /* reference point of string */
char str[]; /* the text */
{
GPIC_close_line();
fprintf(gpoutfile, "\"%s\" ", str);
switch (GPIC_justify) {
case LEFT:{
fputs("ljust ", gpoutfile);
break;
}
case CENTRE:{
fputs(" ", gpoutfile);
break;
}
case RIGHT:{
fputs("rjust ", gpoutfile);
break;
}
}
fprintf(gpoutfile, "at x+%f,y+%f\n", GPIC_coord(x), GPIC_coord(y));
}
TERM_PUBLIC int GPIC_justify_text(mode)
enum JUSTIFY mode;
{
GPIC_justify = mode;
return (TRUE);
}
TERM_PUBLIC int GPIC_text_angle(ang)
int ang;
{
GPIC_close_line();
return (FALSE);
}
TERM_PUBLIC void GPIC_reset()
{
fflush(gpoutfile);
}
#endif /* TERM_BODY */
#ifdef TERM_TABLE
TERM_TABLE_START(gpic_driver)
"gpic", "GPIC -- Produce graphs in groff using the gpic preprocessor",
GPIC_XMAX, GPIC_YMAX, GPIC_VCHAR, GPIC_HCHAR,
GPIC_VTIC, GPIC_HTIC, GPIC_options, GPIC_init, GPIC_reset,
GPIC_text, null_scale, GPIC_graphics, GPIC_move, GPIC_vector,
GPIC_linetype, GPIC_put_text, GPIC_text_angle,
GPIC_justify_text, line_and_point, GPIC_arrow, set_font_null
TERM_TABLE_END(gpic_driver)
#undef LAST_TERM
#define LAST_TERM gpic_driver
#endif /* TERM_TABLE */
#endif /* TERM_PROTO_ONLY */
#ifdef TERM_HELP
START_HELP(gpic)
"1 gpic",
"?commands set terminal gpic",
"?set terminal gpic",
"?set term gpic",
"?terminal gpic",
"?term gpic",
"?gpic",
" The `gpic` terminal driver generates GPIC graphs in the Free Software",
" Foundations's \"groff\" package. The default size is 5 x 3 inches. The only",
" option is the origin, which defaults to (0,0).",
"",
" Syntax:",
" set terminal gpic {<x> <y>}",
"",
" where `x` and `y` are in inches.",
"",
" A simple graph can be formatted using",
"",
" groff -p -mpic -Tps file.pic > file.ps.",
"",
" The output from pic can be pipe-lined into eqn, so it is possible to put",
" complex functions in a graph with the `set label` and `set {x/y}label`",
" commands. For instance,",
"",
" set ylab '@space 0 int from 0 to x alpha ( t ) roman d t@'",
"",
" will label the y axis with a nice integral if formatted with the command:",
"",
" gpic filename.pic | geqn -d@@ -Tps | groff -m[macro-package] -Tps",
" > filename.ps",
"",
" Figures made this way can be scaled to fit into a document. The pic language",
" is easy to understand, so the graphs can be edited by hand if need be. All",
" co-ordinates in the pic-file produced by `gnuplot` are given as x+gnuplotx",
" and y+gnuploty. By default x and y are given the value 0. If this line is",
" removed with an editor in a number of files, one can put several graphs in",
" one figure like this (default size is 5.0x3.0 inches):",
"",
" .PS 8.0",
" x=0;y=3",
" copy \"figa.pic\"",
" x=5;y=3",
" copy \"figb.pic\"",
" x=0;y=0",
" copy \"figc.pic\"",
" x=5;y=0",
" copy \"figd.pic\"",
" .PE",
"",
" This will produce an 8-inch-wide figure with four graphs in two rows on top",
" of each other.",
"",
" One can also achieve the same thing by the command",
"",
" set terminal gpic x y",
"",
" for example, using",
"",
" .PS 6.0",
" copy \"trig.pic\"",
" .PE"
END_HELP(gpic)
#endif /* TERM_HELP */