[BACK]Return to pc.trm CVS log [TXT][DIR] Up to [local] / OpenXM_contrib / gnuplot / term

File: [local] / OpenXM_contrib / gnuplot / term / Attic / pc.trm (download)

Revision 1.1, Sun Jan 9 17:01:15 2000 UTC (24 years, 4 months ago) by maekawa
Branch: MAIN

Initial revision

/*
 * $Id: pc.trm,v 1.20 1998/06/18 14:59:22 ddenholm Exp $
 *
 */

/* GNUPLOT - pc.trm */

/*[
 * Copyright 1990 - 1993, 1998
 *
 * Permission to use, copy, and distribute this software and its
 * documentation for any purpose with or without fee is hereby granted,
 * provided that the above copyright notice appear in all copies and
 * that both that copyright notice and this permission notice appear
 * in supporting documentation.
 *
 * Permission to modify the software is granted, but not the right to
 * distribute the complete modified source code.  Modifications are to
 * be distributed as patches to the released version.  Permission to
 * distribute binaries produced by compiling modified sources is granted,
 * provided you
 *   1. distribute the corresponding source modifications from the
 *    released version in the form of a patch file along with the binaries,
 *   2. add special version identification to distinguish your version
 *    in addition to the base release version number,
 *   3. provide your name and address as the primary contact for the
 *    support of your modified version, and
 *   4. retain our contact information in regard to use of the base
 *    software.
 * Permission to distribute the released version of the source code along
 * with corresponding source modifications in the form of a patch file is
 * granted with same provisions 2 through 4 for binary distributions.
 *
 * This software is provided "as is" without express or implied warranty
 * to the extent permitted by applicable law.
]*/

/*
 * This file is included by ../term.c.
 *
 * This terminal driver supports:
 *  Under Microsoft C
 *      cga, egabios, egalib, vgabios, hercules, corona325, att
 *  Under Turboc C
 *      cga, ega/vga, vgamono, svga, mcga, hercules, att
 *  Under Watcom C
 *      cga, ega/vga, vgamono, svga, mcga, hercules, ???
 *
 * AUTHORS
 *  Colin Kelley, Thomas Williams, William Wilson, Russell Lang
 *  modified by David J. Liu (liu@csb.yale.edu) for version 3.6
 *
 * send your comments or suggestions to (info-gnuplot@dartmouth.edu).
 *
 * Because only one compiler is used to generate gnuplot.exe
 * and the type of the single graphics board is auto-detected,
 * we can combine all these parts into one terminal type: PC
 * and let the computer take care of the rest.  -- DJL
 *
 * Since I don't have MicroSoft C, I assume it would define MSC.
 * Please correct it if you are using MS C.  Thank you.  -- DJL
 *
 */

/*
 * adapted to the new terminal layout by Stefan Bodewig (Dec. 1995)
 */

#include "driver.h"

#ifdef TERM_REGISTER
register_term(dospc)
#endif

#ifdef TERM_PROTO
TERM_PUBLIC void PC_text __PROTO((void));
TERM_PUBLIC void PC_reset __PROTO((void));
TERM_PUBLIC void PC_init __PROTO((void));
TERM_PUBLIC void PC_graphics __PROTO((void));
TERM_PUBLIC void PC_linetype __PROTO((int linetype));
TERM_PUBLIC void PC_move __PROTO((int x, int y));
TERM_PUBLIC void PC_vector __PROTO((int x, int y));
TERM_PUBLIC void PC_put_text __PROTO((int x, int y, char *str));
TERM_PUBLIC int PC_text_angle __PROTO((int ang));
TERM_PUBLIC int PC_justify_text __PROTO((enum JUSTIFY ang));

#define PC_HCHAR FNT5X9_HCHAR
#define PC_VCHAR FNT5X9_VCHAR
#define PC_HTIC 5
#define PC_VTIC 4
#define PC_XMAX 100		/* These two entries are just place holders. */
#define PC_YMAX 100		/* The actual values will be found in init.  */
#endif /* TERM_PROTO */

#ifndef TERM_PROTO_ONLY
#ifdef TERM_BODY

#ifdef __TURBOC__
static int huge detect_svga __PROTO((void));
#endif /* __TURBOC__ */

#include <string.h>
#include <stdlib.h>
#ifdef __TURBOC__
#include <graphics.h>
#include <conio.h>
#include <dos.h>
#endif /* __TURBOC__ */
#ifdef __WATCOMC__
#include <graph.h>
#endif /* WATCOMC */
#ifdef MSC
#include "mcega.h"
#endif /* MSC */

static int pattern[] ={ 0xffff, 0x0f0f, 0xffff, 0xaaaa, 0x3333, 0x3f3f, 0x0f0f };
static int vga_color[] ={ 7, 8, 2, 3, 4, 5, 9, 14, 12, 15, 13, 10, 11, 1, 6 };

static int pc_driver, pc_mode;
static int graphics_on = FALSE, pc_graphics = FALSE;
static int startx, starty, pc_lastx, pc_lasty, pc_colors;
static int pc_angle, pc_hjustify, pc_vjustify, pc_text_size, pc_text_dir, pc_corscreen = -1;


#ifdef __TURBOC__
extern int far _Cdecl SVGA_driver_far[];
#endif /* __TURBOC__ */

#ifdef __WATCOMC__
enum {
    HORIZ_DIR, VERT_DIR
};
static void _settextang(ang)
int ang;
{
    if (ang == HORIZ_DIR) {
	_settextorient(1, 0);
    } else {
	_settextorient(0, 1);
    }
}
#endif /* WATCOMC */

static int huge detect_svga(void)
{
    return 0;			/* the default mode, just a place holder */
}

void PC_setup()
{				/* called from the beginning of main() */
    int i, t, x, y;
    char pc_modename[9];
#ifdef __WATCOMC__
    struct videoconfig VC;
#endif /* WATCOMC */

    /* First link all BRI dribers, then detect the display card. */
    /* If environment PCTRM is set, try initiate the card/mode.  */

    /* special instruction on mode */
    safe_strncpy(pc_modename, getenv("PCTRM"), 8);

#ifdef __TURBOC__
    /* Some of this code including BGI drivers are copyright Borland Intl. */
    registerfarbgidriver(EGAVGA_driver_far);
    registerfarbgidriver(CGA_driver_far);
    registerfarbgidriver(Herc_driver_far);
    registerfarbgidriver(ATT_driver_far);
    registerfarbgidriver(PC3270_driver_far);
    pc_driver = DETECT;
    detectgraph(&pc_driver, &pc_mode);
    if (graphresult()) {
	fputs("Unable to initialize graphics.\n", stderr);
	return;
    }
#ifdef BGI_NAME
/* the highest standard pc_driver value, see graphics.h */
#define LAST_BGI 10
/* the last mode of the SVGA.BGI */
#define LAST_SVGA_MODE 6
    /* test SVGA if we have VGA */
    if ((pc_driver == VGA) && (pc_modename[0] == 'S')) {
	installuserdriver(BGI_NAME, &detect_svga);
	registerfarbgidriver(SVGA_driver_far);
	pc_driver = DETECT;
	initgraph(&pc_driver, &pc_mode, "");
        /* The following code, which is independent of the actual SVGA.BGI
	 * used, tries to find a mode of width defined in the environment
	 * variable PCTRM */
	if (pc_driver > LAST_BGI) {	/* success */
	    sscanf(pc_modename, "S%d", &t);
	    switch (t) {
	    case 800:
		break;		/* S800  */
	    case 1024:
		break;		/* S1024 */
	    case 1280:
		break;		/* S1280 */
	    default:
		t = 640;	/* 640x480 */
	    }
	    for (i = 0; i <= LAST_SVGA_MODE; i++) {
		setgraphmode(i);
		if ((getmaxx() + 1 == t) && (getmaxcolor() > 14))
		    pc_mode = i;
	    }
	    setgraphmode(pc_mode);
	    if (graphresult()) {	/* error, go back to VGA */
		pc_driver = VGA;
		pc_mode = 4;
	    }
	}
    }				/* SVGA tested */
    if (pc_driver <= LAST_BGI)
#endif /* BGI_NAME */
	initgraph(&pc_driver, &pc_mode, "");
    pc_colors = getmaxcolor() + 1;
    pc_lastx = getmaxx();
    pc_lasty = getmaxy();
    restorecrtmode();
    clrscr();
#endif /* __TURBOC__ */
#ifdef __WATCOMC__
    _getvideoconfig(&VC);
    if ((pc_driver = VC.adapter) == 0) {
	fprintf(stderr, "Unable to initialize graphics.\n");
	return;
    }
    switch (pc_driver = VC.adapter) {
    case _HERCULES:
	pc_mode = _HERCMONO;
	break;
    case _CGA:
	pc_mode = _HRESBW;
	break;
    case _MCGA:
	pc_mode = _MRES256COLOR;
	break;
    case _EGA:
	pc_mode = (VC.monitor == _MONO ? _ERESCOLOR : _ERESNOCOLOR);
	break;
    case _VGA:
	pc_mode = _VRES16COLOR;
	break;
    case _SVGA:
	if (pc_modename[0] == 'S') {	/* test SVGA resolution */
	    sscanf(pc_modename, "S%d", &t);
	    switch (t) {
	    case 800:
		pc_mode = _SVRES256COLOR;
		break;		/* S800  */
	    case 1024:
		pc_mode = _XRES256COLOR;
		break;		/* S1024 */
	    case 1280:
		pc_mode = _XRES256COLOR + 2;
		break;		/* S1280 */
		/* Someone help me, who knows, how a newer Watcom calls that */
	    default:
		t = 640;
		pc_mode = _VRES256COLOR;	/* 640x480 */
	    }
	    while (_setvideomode(pc_mode) == 0)
		pc_mode--;
	}
	break;
    default:
	fputs("Unable to initialize graphics.\n", stderr);
	return;
    }
    _setvideomode(pc_mode);
    _getvideoconfig(&VC);
    pc_lastx = VC.numxpixels - 1;
    pc_lasty = VC.numypixels - 1;
    pc_colors = VC.numcolors;
    _setvideomode(_DEFAULTMODE);
#endif /* WATCOMC */
    x = pc_lastx + 1;
    y = pc_lasty + 1;
    fprintf(stderr, "\tScreen of %d x %d pixels and %d colors.\n",
	    x, y, pc_colors);
    pc_graphics = TRUE;
}

TERM_PUBLIC void PC_init()
{
    char *pathp;
#ifdef __WATCOMC__
    struct _fontinfo fi;
#endif

    if (!pc_graphics) {
	fputs("Unable to initialize graphics.\n", stderr);
	term = 0;
	return;
    }
    /* Double the tic/font sizes. */
    pc_text_size = (pc_lasty > 590) ? 2 : 1;
    term->h_char = PC_HCHAR;
    term->v_char = PC_VCHAR;
    term->h_tic = PC_HTIC * pc_text_size;
    term->v_tic = PC_VTIC * pc_text_size;
    term->xmax = pc_lastx + 1;
    term->ymax = pc_lasty + 1;
#ifdef __TURBOC__
    setgraphmode(pc_mode);
    settextstyle(DEFAULT_FONT, HORIZ_DIR, pc_text_size);
    settextjustify(pc_hjustify, pc_vjustify);
    term->h_char = textheight("X");	/* overriding the default */
    term->v_char = textwidth("X");	/* overriding the default */
#endif /* __TURBOC__ */
#ifdef __WATCOMC__
    _setvideomode(pc_mode);
    _settextang(HORIZ_DIR);
    _settextalign(pc_hjustify, pc_vjustify);
    _setcharsize(pc_text_size * PC_HCHAR, pc_text_size * PC_VCHAR);
    _getfontinfo(&fi);
    term->h_char = fi.avgwidth;
    term->v_char = fi.pixheight * 1.5;
#endif /* WATCOMC */
#ifdef MSC
#endif /* MSC */
}

TERM_PUBLIC void PC_graphics()
{
    graphics_on = TRUE;
#ifdef __TURBOC__
    setgraphmode(pc_mode);
#endif /* __TURBOC__ */
#ifdef __WATCOMC__
    _setvideomode(pc_mode);
#endif /* WATCOMC */
#ifdef MSC
    if (pc_corscreen == -1)
	Vmode(18);		/* VGA */
    else {
	grinit(corscreen);
	grandtx();
    }				/* corolla */
#endif /* MSC */
}

TERM_PUBLIC void PC_linetype(linetype)
{
    if (pc_colors > 14) {	/* 16 or more colors */
	if (linetype >= 13)
	    linetype %= 13;
#ifdef __TURBOC__
	setcolor(vga_color[linetype + 2]);
#endif /* __TURBOC__ */
#ifdef __WATCOMC__
	_setcolor(vga_color[linetype + 2]);
#endif /* WATCOMC */
#ifdef MSC
#endif /* MSC */
    } else {			/* MONO */
	if (linetype >= 5)
	    linetype %= 5;
#ifdef __TURBOC__
	setlinestyle(4, pattern[linetype + 2], 1);
#endif /* __TURBOC__ */
#ifdef __WATCOMC__
	_setlinestyle(pattern[linetype + 2]);
#endif /* WATCOMC */
#ifdef MSC
	if (pc_corscreen != -1)
	    Cor_mask(pattern[linetype + 2]);
#endif /* MSC */
    }
}

TERM_PUBLIC void PC_move(x, y)
int x, y;
{
#ifdef __TURBOC__
    moveto(x, pc_lasty - y);
#endif /* __TURBOC__ */
#ifdef __WATCOMC__
    _moveto(x, pc_lasty - y);
#endif /* WATCOMC */
#ifdef MSC
#endif /* MSC */
    startx = x;
    starty = y;
}

TERM_PUBLIC void PC_vector(x, y)
int x, y;
{
#ifdef __TURBOC__
    lineto(x, pc_lasty - y);
#endif /* __TURBOC__ */
#ifdef __WATCOMC__
    _lineto(x, pc_lasty - y);
#endif /* WATCOMC */
#ifdef MSC
    if (pc_corscreen != -1)
	Cor_line(startx, COR_YLAST - starty, x, COR_YLAST - y);
#endif /* MSC */
    startx = x;
    starty = y;
}

TERM_PUBLIC void PC_reset()
{
    graphics_on = FALSE;
#ifdef __TURBOC__
    restorecrtmode();
    clrscr();
#endif /* __TURBOC__ */
#ifdef __WATCOMC__
    _setvideomode(_DEFAULTMODE);
#endif /* WATCOMC */
#ifdef MSC
    Vmode(3);
#endif /* MSC */
}

TERM_PUBLIC void PC_text()
{
    if (graphics_on) {
	graphics_on = FALSE;
	(void) getch();
#ifdef __TURBOC__
	restorecrtmode();
	clrscr();
#endif /* __TURBOC__ */
#ifdef __WATCOMC__
	_setvideomode(_DEFAULTMODE);
#endif /* WATCOMC */
#ifdef MSC
	if (pc_corscreen != -1) {
	    grreset();
	    txonly();
	}
	Vmode(3);
#endif /* MSC */
    }
}

TERM_PUBLIC int PC_text_angle(ang)
int ang;
{
    switch (ang) {
    case 0:
	pc_text_dir = HORIZ_DIR;
	break;
    case 1:
	pc_text_dir = VERT_DIR;
	break;
    }
    return TRUE;
}

TERM_PUBLIC int PC_justify_text(just)
enum JUSTIFY just;
{
#if defined(__TURBOC__)
    switch (just) {
    case LEFT:
	pc_hjustify = LEFT_TEXT;
	pc_vjustify = CENTER_TEXT;
	break;
    case CENTRE:
	pc_hjustify = CENTER_TEXT;
	pc_vjustify = CENTER_TEXT;
	break;
    case RIGHT:
	pc_hjustify = RIGHT_TEXT;
	pc_vjustify = CENTER_TEXT;
	break;
    }
    settextjustify(pc_hjustify, pc_vjustify);
    return 1;
#elif defined(__WATCOMC__)
    switch (just) {
    case LEFT:
	pc_hjustify = _LEFT;
	pc_vjustify = _HALF;
	break;
    case CENTRE:
	pc_hjustify = _CENTER;
	pc_vjustify = _HALF;
	break;
    case RIGHT:
	pc_hjustify = _RIGHT;
	pc_vjustify = _HALF;
	break;
    }
    _settextalign(pc_hjustify, pc_vjustify);
    return 1;
#else
    return (just == LEFT);
#endif
}

TERM_PUBLIC void PC_put_text(x, y, str)
int x, y;
char *str;
{
#ifdef __TURBOC__
    settextstyle(DEFAULT_FONT, pc_text_dir, pc_text_size);
    settextjustify(pc_hjustify, pc_vjustify);
    outtextxy(x, pc_lasty - y, str);
#endif /* __TURBOC__ */
#ifdef __WATCOMC__
    _setcharsize(pc_text_size * PC_VCHAR, pc_text_size * PC_HCHAR);
    _settextang(pc_text_dir);
    _settextalign(pc_hjustify, pc_vjustify);
    _grtext(x, pc_lasty - y, str);
#endif /* WATCOMC */
#ifdef MSC
#endif /* MSC */
}

#endif /* TERM_BODY */

#ifdef TERM_TABLE

TERM_TABLE_START(dospc_driver)
    "dospc", "IBM PC/Clone running DOS",
    PC_XMAX, PC_YMAX, PC_VCHAR, PC_HCHAR,
    PC_VTIC, PC_HTIC, options_null, PC_init, PC_reset,
    PC_text, null_scale, PC_graphics, PC_move, PC_vector,
    PC_linetype, PC_put_text, PC_text_angle,
    PC_justify_text, line_and_point, do_arrow, set_font_null
TERM_TABLE_END(pc_driver)

#undef LAST_TERM
#define LAST_TERM dospc_driver

#endif /* TERM_TABLE */
#endif /* TERM_PROTO_ONLY */

#ifdef TERM_HELP
START_HELP(dospc)
"1 dospc",
"?commands set terminal dospc",
"?set terminal dospc",
"?set term dospc",
"?terminal dospc",
"?term dospc",
"?dospc",
" The `dospc` terminal driver supports PCs with arbitrary graphics boards, which",
" will be automatically detected.  It should be used only if you are not using",
" the gcc or Zortec C/C++ compilers."
END_HELP(dospc)
#endif /* TERM_HELP */