[BACK]Return to tkcanvas.trm CVS log [TXT][DIR] Up to [local] / OpenXM_contrib / gnuplot / term

Diff for /OpenXM_contrib/gnuplot/term/Attic/tkcanvas.trm between version 1.1.1.1 and 1.1.1.2

version 1.1.1.1, 2000/01/09 17:01:16 version 1.1.1.2, 2000/01/22 14:16:30
Line 57 
Line 57 
  * adapted to the new terminal layout by Alex Woo (Sept. 1996)   * adapted to the new terminal layout by Alex Woo (Sept. 1996)
  */   */
   
   /*
    * extended interactive Tk/Tcl capabilities
    * Thomas Sefzick, March 1999, t.sefzick@fz-juelich.de
    *
    * added the perltk.trm code written by Slaven Rezic <eserte@cs.tu-berlin.de>,
    * the variable 'tk_perl' switches between tcl/tk and perltk code.
    * 'linewidth' and 'justify text' added, ends of plotted lines are now rounded.
    * if 'perltk' is chosen, perl code is produced, otherwise tcl code.
    * Thomas Sefzick, May 1999, t.sefzick@fz-juelich.de
    *
    * scale plot to fit into the actual size of the canvas as reported by
    * the window manager (the canvas itself doesn't report its real size).
    * Matt Willis, October 1999, mattbwillis@my-deja.com
    */
   
 #include "driver.h"  #include "driver.h"
   
 #ifdef TERM_REGISTER  #ifdef TERM_REGISTER
Line 64  register_term(tkcanvas)
Line 79  register_term(tkcanvas)
 #endif  #endif
   
 #ifdef TERM_PROTO  #ifdef TERM_PROTO
   TERM_PUBLIC void TK_options __PROTO((void));
 TERM_PUBLIC void TK_init __PROTO((void));  TERM_PUBLIC void TK_init __PROTO((void));
 TERM_PUBLIC void TK_graphics __PROTO((void));  TERM_PUBLIC void TK_graphics __PROTO((void));
 TERM_PUBLIC void TK_text __PROTO((void));  TERM_PUBLIC void TK_text __PROTO((void));
Line 72  TERM_PUBLIC void TK_move __PROTO((unsigned int x, unsi
Line 88  TERM_PUBLIC void TK_move __PROTO((unsigned int x, unsi
 TERM_PUBLIC void TK_vector __PROTO((unsigned int x, unsigned int y));  TERM_PUBLIC void TK_vector __PROTO((unsigned int x, unsigned int y));
 TERM_PUBLIC void TK_put_text __PROTO((unsigned int x, unsigned int y, char *str));  TERM_PUBLIC void TK_put_text __PROTO((unsigned int x, unsigned int y, char *str));
 TERM_PUBLIC void TK_reset __PROTO((void));  TERM_PUBLIC void TK_reset __PROTO((void));
   TERM_PUBLIC int TK_justify_text __PROTO((enum JUSTIFY));
   TERM_PUBLIC int TK_set_font __PROTO((char *font));
   TERM_PUBLIC void TK_linewidth __PROTO((double linewidth));
   
 #define TK_XMAX 1000  #define TK_XMAX 1000
 #define TK_YMAX 1000  #define TK_YMAX 1000
Line 88  TERM_PUBLIC void TK_reset __PROTO((void));
Line 107  TERM_PUBLIC void TK_reset __PROTO((void));
 #ifndef TERM_PROTO_ONLY  #ifndef TERM_PROTO_ONLY
 #ifdef TERM_BODY  #ifdef TERM_BODY
   
 static int tk_angle = 0;  /* plot2d.c */
   extern double min_array[], max_array[], base_array[], log_base_array[];
   extern TBOOLEAN log_array[];
   /* graphics.c */
   extern int xleft, xright, ybot, ytop;
   extern TBOOLEAN is_3d_plot;
   
   /* static int tk_angle = 0; unused, for now */
 static int tk_lastx;  static int tk_lastx;
 static int tk_lasty;  static int tk_lasty;
 static int tk_color = 0;  static int tk_color = 0;
 static char *tk_colors[] = { "black", "gray", "red", "blue", "green", "brown", "magenta", "cyan" };  static char tk_anchor[7] = "w";
   static double tk_linewidth = 1.0;
   static int tk_perl = 0;
   static int tk_interactive = 0;
   static char *tk_colors[] = {
       "black", "gray", "red", "blue", "green", "brown", "magenta", "cyan"
   };
   
 TERM_PUBLIC void TK_init()  TERM_PUBLIC void
   TK_options()
 {  {
     fputs("\      tk_perl = 0;
 proc gnuplot can {\n\      tk_interactive = 0;
 $can delete all\n\  
 set cmx [lindex [$can configure -width] 4]\n\  
 set cmy [lindex [$can configure -height] 4]\n",  
           gpoutfile);  
   
     tk_lastx = tk_lasty = tk_color = 0;      if (!END_OF_COMMAND) {
           if (almost_equals(c_token, "p$erltk")) {
               tk_perl = 1;
               c_token++;
           }
           if (almost_equals(c_token, "i$nteractive")) {
               tk_interactive = 1;
               c_token++;
           }
       }
   
       sprintf(term_options, "%s %s",
               tk_perl ? "perltk" : "",
               tk_interactive ? "interactive" : "");
 }  }
   
   TERM_PUBLIC void
   TK_init()
   {
   }
   
 TERM_PUBLIC void TK_graphics()  TERM_PUBLIC void
   TK_graphics()
 {  {
           /*
           * the resulting tcl or perl code takes the actual width and height
           * of the defined canvas and scales the plot to fit.
           * => NOTE: this makes 'set size' useless !!!
           * unless the original width and height is taken into account
           * by some tcl or perl code, that's why the 'gnuplot_plotarea' and
           * 'gnuplot_axisranges' procedures are supplied.
           */
       if (tk_perl) {
           fputs("\
   sub gnuplot {\n\
   my($can) = @_;\n\
   $can->delete('all');\n\
   my $cmx = ($can->configure(-width))[4];\n\
   my $cmy = ($can->configure(-height))[4];\n\
   my $cmx = $can->width - 2 * $can->cget(-border);\n\
   if ($cmx <= 1) {\n$cmx = ($can->cget(-width));\n}\n\
   my $cmy = $can->height - 2 * $can->cget(-border);\n\
   if ($cmy <= 1) {\n$cmy = ($can->cget(-height));\n}\n",
                 gpoutfile);
       } else {
           fputs("\
   proc gnuplot can {\n\
   $can delete all\n\
   set cmx [expr [winfo width $can]-2*[$can cget -border]]\n\
   if {$cmx <= 1} {set cmx [$can cget -width]}\n\
   set cmy [expr [winfo height $can]-2*[$can cget -border]]\n\
   if {$cmy <= 1} {set cmy [$can cget -height]}\n",
                 gpoutfile);
       }
       tk_lastx = tk_lasty = tk_color = 0;
 }  }
   
   TERM_PUBLIC void
 TERM_PUBLIC void TK_reset()  TK_reset()
 {  {
 }  }
   
 TERM_PUBLIC void TK_linetype(linetype)  TERM_PUBLIC void
   TK_linetype(linetype)
 int linetype;  int linetype;
 {  {
     tk_color = (linetype + 2) & 7;      tk_color = (linetype + 2) & 7;
 }  }
   
 TERM_PUBLIC void TK_move(x, y)  TERM_PUBLIC void
   TK_linewidth(linewidth)
   double linewidth;
   {
       tk_linewidth = linewidth;
   }
   
   TERM_PUBLIC void
   TK_move(x, y)
 unsigned int x, y;  unsigned int x, y;
 {  {
     tk_lastx = x;      tk_lastx = x;
     tk_lasty = 1000 - y;      tk_lasty = 1000 - y;
 }  }
   
   #define TK_REAL_VALUE(value,axis) \
    (log_array[axis])\
    ?pow(base_array[axis],min_array[axis]+value*(max_array[axis]-min_array[axis]))\
    :min_array[axis]+value*(max_array[axis]-min_array[axis])
   
 TERM_PUBLIC void TK_vector(x, y)  #define TK_X_VALUE(value) \
    (double)(value-xleft)/(double)(xright-xleft)
   
   #define TK_Y_VALUE(value) \
    (double)((TK_YMAX-value)-ybot)/(double)(ytop-ybot)
   
   TERM_PUBLIC void
   TK_vector(x, y)
 unsigned int x, y;  unsigned int x, y;
 {  {
           /*
           * this is the 1st part of the wrapper around the 'create line' command
           * used to bind some actions to a line segment:
           * bind {
           *      normal create line command
           *      } gnuplot_xy(some coordinates)
           */
       if (tk_interactive && !is_3d_plot) {
           if (tk_perl)
               fprintf(gpoutfile, "$can->bind(");
           else
               fprintf(gpoutfile, "$can bind [\n");
       }
           /*
            * end of 1st part of wrapper
            */
     y = 1000 - y;      y = 1000 - y;
     fprintf(gpoutfile,          /*
             "$can create line [expr $cmx * %d /1000] [expr $cmy * %d /1000] [expr $cmx * %d /1000] [expr $cmy * %d /1000] -fill %s\n",           * here is the basic well-known command for plotting a line segment
             tk_lastx, tk_lasty, x, y, tk_colors[tk_color]);           */
       if (tk_perl) {
           fprintf(gpoutfile,"\
   $can->createLine(\
   $cmx * %d / 1000, \
   $cmy * %d / 1000, \
   $cmx * %d / 1000, \
   $cmy * %d / 1000, -fill => q{%s}, -width => %f, -capstyle => q{round})",
                   tk_lastx, tk_lasty, x, y, tk_colors[tk_color], tk_linewidth);
       } else {
           fprintf(gpoutfile,"\
   $can create line \
   [expr $cmx * %d /1000] \
   [expr $cmy * %d /1000] \
   [expr $cmx * %d /1000] \
   [expr $cmy * %d /1000] -fill %s -width %f -capstyle round\n",
                   tk_lastx, tk_lasty, x, y, tk_colors[tk_color], tk_linewidth);
       }
   
           /*
            * this is the 2nd part of the wrapper around the 'create line'
            * command, it generates a mechanism which calls 'gnuplot_xy' for
            * the line segment pointed to by the mouse cursor when a mouse
            * button is pressed
            */
       if (tk_interactive && !is_3d_plot) {
           if (tk_perl) {
               /* Ev('W') not needed here, supplied anyhow, WHY ??? */
               fprintf(gpoutfile,"\
   , '<Button>' => \
   [\\&gnuplot_xy, %f, %f, %f, %f, %f, %f, %f, %f,",
                       TK_REAL_VALUE(TK_X_VALUE(tk_lastx), FIRST_X_AXIS),
                       TK_REAL_VALUE(TK_Y_VALUE(tk_lasty), FIRST_Y_AXIS),
                       TK_REAL_VALUE(TK_X_VALUE(tk_lastx), SECOND_X_AXIS),
                       TK_REAL_VALUE(TK_Y_VALUE(tk_lasty), SECOND_Y_AXIS),
                       TK_REAL_VALUE(TK_X_VALUE(x), FIRST_X_AXIS),
                       TK_REAL_VALUE(TK_Y_VALUE(y), FIRST_Y_AXIS),
                       TK_REAL_VALUE(TK_X_VALUE(x), SECOND_X_AXIS),
                       TK_REAL_VALUE(TK_Y_VALUE(y), SECOND_Y_AXIS));
               if (log_array[FIRST_X_AXIS]) {
                   fprintf(gpoutfile, " %f,",
                           TK_REAL_VALUE(TK_X_VALUE(0.5 * (x + tk_lastx)), FIRST_X_AXIS));
               } else {
                   fprintf(gpoutfile, " \"\",");
               }
               if (log_array[FIRST_Y_AXIS]) {
                   fprintf(gpoutfile, " %f,",
                           TK_REAL_VALUE(TK_Y_VALUE(0.5 * (y + tk_lasty)), FIRST_Y_AXIS));
               } else {
                   fprintf(gpoutfile, " \"\",");
               }
               if (log_array[SECOND_X_AXIS]) {
                   fprintf(gpoutfile, " %f,",
                           TK_REAL_VALUE(TK_X_VALUE(0.5 * (x + tk_lastx)), SECOND_X_AXIS));
               } else {
                   fprintf(gpoutfile, " \"\",");
               }
               if (log_array[SECOND_Y_AXIS]) {
                   fprintf(gpoutfile, " %f",
                           TK_REAL_VALUE(TK_Y_VALUE(0.5 * (y + tk_lasty)), SECOND_Y_AXIS));
               } else {
                   fprintf(gpoutfile, " \"\"");
               }
               fprintf(gpoutfile, "]);\n");
           } else {
               fprintf(gpoutfile,"\
   ] <Button> \
   \"gnuplot_xy %%W %f %f %f %f %f %f %f %f",
                       TK_REAL_VALUE(TK_X_VALUE(tk_lastx), FIRST_X_AXIS),
                       TK_REAL_VALUE(TK_Y_VALUE(tk_lasty), FIRST_Y_AXIS),
                       TK_REAL_VALUE(TK_X_VALUE(tk_lastx), SECOND_X_AXIS),
                       TK_REAL_VALUE(TK_Y_VALUE(tk_lasty), SECOND_Y_AXIS),
                       TK_REAL_VALUE(TK_X_VALUE(x), FIRST_X_AXIS),
                       TK_REAL_VALUE(TK_Y_VALUE(y), FIRST_Y_AXIS),
                       TK_REAL_VALUE(TK_X_VALUE(x), SECOND_X_AXIS),
                       TK_REAL_VALUE(TK_Y_VALUE(y), SECOND_Y_AXIS));
               if (log_array[FIRST_X_AXIS]) {
                   fprintf(gpoutfile, " %f",
                           TK_REAL_VALUE(TK_X_VALUE(0.5 * (x + tk_lastx)), FIRST_X_AXIS));
               } else {
                   fprintf(gpoutfile, " {}");
               }
               if (log_array[FIRST_Y_AXIS]) {
                   fprintf(gpoutfile, " %f",
                           TK_REAL_VALUE(TK_Y_VALUE(0.5 * (y + tk_lasty)), FIRST_Y_AXIS));
               } else {
                   fprintf(gpoutfile, " {}");
               }
               if (log_array[SECOND_X_AXIS]) {
                   fprintf(gpoutfile, " %f",
                           TK_REAL_VALUE(TK_X_VALUE(0.5 * (x + tk_lastx)), SECOND_X_AXIS));
               } else {
                   fprintf(gpoutfile, " {}");
               }
               if (log_array[SECOND_Y_AXIS]) {
                   fprintf(gpoutfile, " %f",
                           TK_REAL_VALUE(TK_Y_VALUE(0.5 * (y + tk_lasty)), SECOND_Y_AXIS));
               } else {
                   fprintf(gpoutfile, " {}");
               }
               fprintf(gpoutfile, "\"\n");
           }
       } else {
           if (tk_perl) {
               fprintf(gpoutfile, ";\n");
           }
       }
           /*
            * end of the wrapper
            */
     tk_lastx = x;      tk_lastx = x;
     tk_lasty = y;      tk_lasty = y;
 }  }
   
   #undef TK_REAL_VALUE
   #undef TK_X_VALUE
   #undef TK_Y_VALUE
   
 TERM_PUBLIC void TK_put_text(x, y, str)  TERM_PUBLIC void
   TK_put_text(x, y, str)
 unsigned int x, y;  unsigned int x, y;
 char *str;  char *str;
 {  {
     y = 1000 - y;      y = 1000 - y;
     fprintf(gpoutfile,      if (tk_perl) {
             "$can create text [expr $cmx * %d /1000] [expr $cmy * %d /1000] -text {%s} -fill %s -anchor w\n",          fprintf(gpoutfile,"\
             x, y, str, tk_colors[tk_color]);  $can->createText(\
   $cmx * %d / 1000, \
   $cmy * %d / 1000, \
   -text => q{%s}, -fill => q{%s}, -anchor => '%s', \
   (defined $font ? (-font => $font) : ()));\n",
                   x, y, str, tk_colors[tk_color], tk_anchor);
       } else {
           fprintf(gpoutfile,"\
   eval $can create text \
   [expr $cmx * %d /1000] \
   [expr $cmy * %d /1000] \
   -text \\{%s\\} -fill %s -anchor %s\
    [expr [info exists font]?\"-font \\$font\":{}]\n",
                   x, y, str, tk_colors[tk_color], tk_anchor);
       }
 }  }
   
 TERM_PUBLIC void TK_text()  TERM_PUBLIC int
   TK_justify_text(anchor)
   enum JUSTIFY anchor;
 {  {
     fputs("}\n", gpoutfile);      int return_value;
     fflush(gpoutfile);  
       switch (anchor) {
       case RIGHT:
           strcpy(tk_anchor, "e");
           return_value = TRUE;
           break;
       case CENTRE:
           strcpy(tk_anchor, "center");
           return_value = TRUE;
           break;
       case LEFT:
           strcpy(tk_anchor, "w");
           return_value = TRUE;
           break;
       default:
           strcpy(tk_anchor, "w");
           return_value = FALSE;
       }
       return return_value;
 }  }
   
   TERM_PUBLIC int
   TK_set_font(font)
   char *font;
   {
       if (!font || *font == NUL) {
           if (tk_perl)
               fputs("undef $font;\n", gpoutfile);
           else
               fputs("catch {unset $font}\n", gpoutfile);
       } else {
           char *name;
           int size = 0;
           size_t sep = strcspn(font, ",");
   
           name = malloc(sep + 1);
           if (!name)
               return FALSE;
           strncpy(name, font, sep);
           name[sep] = NUL;
           if (sep < strlen(font))
               sscanf(&(font[sep + 1]), "%d", &size);
           if (tk_perl) {
               fprintf(gpoutfile,"\
   if ($can->can('fontCreate')) {\n\
   $font = $can->fontCreate(-family => q{%s}",
                       name);
               if (size)
                   fprintf(gpoutfile, ", -size => %d", size);
               fputs(");\n}\n", gpoutfile);
           } else {
               fprintf(gpoutfile, "set font [font create -family %s", name);
               if (size)
                   fprintf(gpoutfile, " -size %d", size);
               fputs("]\n", gpoutfile);
           }
           free(name);
       }
       return TRUE;
   }
   
   TERM_PUBLIC void
   TK_text()
   {
           /*
           * when switching back to text mode some procedures are generated which
           * return important information about plotarea size and axis ranges:
           * 'gnuplot_plotarea' returns the plotarea size in tkcanvas units
           * 'gnuplot_axisranges' returns the min. and max. values of the axis
           * these are essentially needed to set the size of the canvas when the
           * axis scaling is important.
           * moreover, a procedure 'gnuplot_xy' is created which contains the
           * actions bound to line segments (see the above 'TK_vector' code):
           * if the user has defined a procedure named 'user_gnuplot_coordinates'
           * then 'gnuplot_xy' calls this procedure, otherwise is writes the
           * coordinates of the line segment the mouse cursor is pointing to
           * to standard output.
           */
       if (tk_perl) {
           fputs("};\n", gpoutfile);
           if (!is_3d_plot) {
               fputs("sub gnuplot_plotarea {\n", gpoutfile);
               fprintf(gpoutfile,
                       "return (%d, %d, %d, %d);\n",
                       xleft, xright, 1000 - ytop, 1000 - ybot);
               fputs("};\n", gpoutfile);
               fputs("sub gnuplot_axisranges {\n", gpoutfile);
               fprintf(gpoutfile,
                       "return (%f, %f, %f, %f, %f, %f, %f, %f);\n",
                       min_array[FIRST_X_AXIS], max_array[FIRST_X_AXIS],
                       min_array[FIRST_Y_AXIS], max_array[FIRST_Y_AXIS],
                       min_array[SECOND_X_AXIS], max_array[SECOND_X_AXIS],
                       min_array[SECOND_Y_AXIS], max_array[SECOND_Y_AXIS]);
               fputs("};\n", gpoutfile);
               if (tk_interactive) {
                   fputs("sub gnuplot_xy {\n",
                         gpoutfile);
                   fputs("my ($win, $x1s, $y1s, $x2s, $y2s, $x1e, $y1e, $x2e, $y2e, $x1m, $y1m, $x2m, $y2m) = @_;\n",
                         gpoutfile);
                   fputs("if (defined &user_gnuplot_coordinates) {\n",
                         gpoutfile);
                   fputs("my $id = $win->find('withtag', 'current');\n",
                         gpoutfile);
                   fputs("user_gnuplot_coordinates $win, $id, $x1s, $y1s, $x2s, $y2s, $x1e, $y1e, $x2e, $y2e, $x1m, $y1m, $x2m, $y2m\n",
                         gpoutfile);
                   fputs("} else {\n",
                         gpoutfile);
                   fputs("if (length($x1m)>0) {print \" $x1m\";} else {print \" \", 0.5*($x1s+$x1e);}\n",
                         gpoutfile);
                   fputs("if (length($y1m)>0) {print \" $y1m\";} else {print \" \", 0.5*($y1s+$y1e);}\n",
                         gpoutfile);
                   fputs("if (length($x2m)>0) {print \" $x2m\";} else {print \" \", 0.5*($x2s+$x2e);}\n",
                         gpoutfile);
                   fputs("if (length($y2m)>0) {print \" $y2m\";} else {print \" \", 0.5*($y2s+$y2e);}\n",
                         gpoutfile);
                   fputs("print \"\\n\"\n",
                         gpoutfile);
                   fputs("}\n",
                         gpoutfile);
                   fputs("};\n", gpoutfile);
               }
           }
       } else {
           fputs("}\n", gpoutfile);
           if (!is_3d_plot) {
               fputs("proc gnuplot_plotarea {} {\n", gpoutfile);
               fprintf(gpoutfile,
                       "return {%d %d %d %d}\n",
                       xleft, xright, 1000 - ytop, 1000 - ybot);
               fputs("}\n", gpoutfile);
               fputs("proc gnuplot_axisranges {} {\n", gpoutfile);
               fprintf(gpoutfile,
                       "return {%f %f %f %f %f %f %f %f}\n",
                       min_array[FIRST_X_AXIS], max_array[FIRST_X_AXIS],
                       min_array[FIRST_Y_AXIS], max_array[FIRST_Y_AXIS],
                       min_array[SECOND_X_AXIS], max_array[SECOND_X_AXIS],
                       min_array[SECOND_Y_AXIS], max_array[SECOND_Y_AXIS]);
               fputs("}\n", gpoutfile);
               if (tk_interactive) {
                   fputs("proc gnuplot_xy {win x1s y1s x2s y2s x1e y1e x2e y2e x1m y1m x2m y2m} {\n",
                         gpoutfile);
                   fputs("if {([llength [info commands user_gnuplot_coordinates]])} {\n",
                         gpoutfile);
                   fputs("set id [$win find withtag current]\n",
                         gpoutfile);
                   fputs("user_gnuplot_coordinates $win $id $x1s $y1s $x2s $y2s $x1e $y1e $x2e $y2e $x1m $y1m $x2m $y2m\n",
                         gpoutfile);
                   fputs("} else {\n", gpoutfile);
                   fputs("if {[string length $x1m]>0} {puts -nonewline \" $x1m\"} else {puts -nonewline \" [expr 0.5*($x1s+$x1e)]\"}\n",
                         gpoutfile);
                   fputs("if {[string length $y1m]>0} {puts -nonewline \" $y1m\"} else {puts -nonewline \" [expr 0.5*($y1s+$y1e)]\"}\n",
                         gpoutfile);
                   fputs("if {[string length $x2m]>0} {puts -nonewline \" $x2m\"} else {puts -nonewline \" [expr 0.5*($x2s+$x2e)]\"}\n",
                         gpoutfile);
                   fputs("if {[string length $y2m]>0} {puts \" $y2m\"} else {puts \" [expr 0.5*($y2s+$y2e)]\"}\n",
                         gpoutfile);
                   fputs("}\n", gpoutfile);
                   fputs("}\n", gpoutfile);
               }
           }
       }
       fflush(gpoutfile);
   }
   
 #endif /* TERM_BODY */  #endif /* TERM_BODY */
   
 #ifdef TERM_TABLE  #ifdef TERM_TABLE
   
 TERM_TABLE_START(tkcanvas)  TERM_TABLE_START(tkcanvas)
     "tkcanvas", "Tk/Tcl canvas widget",      "tkcanvas", "Tk/Tcl canvas widget [perltk] [interactive]",
     TK_XMAX, TK_YMAX, TK_VCHAR, TK_HCHAR,      TK_XMAX, TK_YMAX, TK_VCHAR, TK_HCHAR,
     TK_VTIC, TK_HTIC, options_null, TK_init, TK_reset,      TK_VTIC, TK_HTIC, TK_options, TK_init, TK_reset,
     TK_text, null_scale, TK_graphics, TK_move, TK_vector,      TK_text, null_scale, TK_graphics, TK_move, TK_vector,
     TK_linetype, TK_put_text, null_text_angle,      TK_linetype, TK_put_text, null_text_angle,
     null_justify_text, do_point, do_arrow, set_font_null      TK_justify_text, do_point, do_arrow, TK_set_font,
       NULL, 0, NULL, NULL, NULL, TK_linewidth
 TERM_TABLE_END(tkcanvas)  TERM_TABLE_END(tkcanvas)
   
 #undef LAST_TERM  #undef LAST_TERM
 #define LAST_TERM tkcanvas  #define LAST_TERM tkcanvas
   
Line 186  START_HELP(tkcanvas)
Line 590  START_HELP(tkcanvas)
 "?terminal tkcanvas",  "?terminal tkcanvas",
 "?term tkcanvas",  "?term tkcanvas",
 "?tkcanvas",  "?tkcanvas",
 " This terminal driver generates tk canvas widget commands.  To use it, rebuild",  " This terminal driver generates Tk canvas widget commands based on Tcl/Tk",
 " `gnuplot` (after uncommenting or inserting the appropriate line in \"term.h\"),",  " (default) or Perl.  To use it, rebuild `gnuplot` (after uncommenting or",
 " then",  " inserting the appropriate line in \"term.h\"), then",
 "",  "",
 "  gnuplot> set term tkcanvas",  "  gnuplot> set term tkcanvas {perltk} {interactive}",
 "  gnuplot> set output 'plot.file'",  "  gnuplot> set output 'plot.file'",
 "",  "",
 " After invoking \"wish\", execute the following sequence of tcl commands:",  " After invoking \"wish\", execute the following sequence of Tcl/Tk commands:",
 "",  "",
 "  % source plot.file",  "  % source plot.file",
 "  % canvas .c",  "  % canvas .c",
 "  % pack .c",  "  % pack .c",
 "  % gnuplot .c",  "  % gnuplot .c",
 "",  "",
 " The code generated by `gnuplot` creates a tcl procedure called \"gnuplot\"",  " Or, for Perl/Tk use a program like this:",
 " that takes the name of a canvas as its argument.  When the procedure is,",  "",
   "  use Tk;",
   "  my $top = MainWindow->new;",
   "  my $c = $top->Canvas;",
   "  $c->pack();",
   "  do \"plot.pl\";",
   "  gnuplot->($c);",
   "  MainLoop;",
   "",
   " The code generated by `gnuplot` creates a procedure called \"gnuplot\"",
   " that takes the name of a canvas as its argument.  When the procedure is",
 " called, it clears the canvas, finds the size of the canvas and draws the plot",  " called, it clears the canvas, finds the size of the canvas and draws the plot",
 " in it, scaled to fit.",  " in it, scaled to fit.",
   "",
   " For 2-dimensional plotting (`plot`) two additional procedures are defined:",
   " \"gnuplot_plotarea\" will return a list containing the borders of the plotting",
   " area \"xleft, xright, ytop, ybot\" in canvas screen coordinates, while the ranges",
   " of the two axes \"x1min, x1max, y1min, y1max, x2min, x2max, y2min, y2max\" in plot",
   " coordinates can be obtained calling \"gnuplot_axisranges\".",
   " If the \"interactive\" option is specified, mouse clicking on a line segment",
   " will print the coordinates of its midpoint to stdout. Advanced actions",
   " can happen instead if the user supplies a procedure named",
   " \"user_gnuplot_coordinates\", which takes the following arguments:",
   " \"win id x1s y1s x2s y2s x1e y1e x2e y2e x1m y1m x2m y2m\",",
   " the name of the canvas and the id of the line segment followed by the",
   " coordinates of its start and end point in the two possible axis ranges; the",
   " coordinates of the midpoint are only filled for logarithmic axes.",
 "",  "",
 " The current version of `tkcanvas` supports neither `multiplot` nor `replot`."  " The current version of `tkcanvas` supports neither `multiplot` nor `replot`."
 END_HELP(tkcanvas)  END_HELP(tkcanvas)
Legend:
Removed from v.1.1.1.1  
changed lines
  Added in v.1.1.1.2
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>