Return to wprinter.c CVS log

Up to [local] / OpenXM_contrib / gnuplot / win

Import gnuplot 3.7.1

#ifndef lint
static char *RCSid = "$Id: wprinter.c,v 1.1.1.2 1998/04/15 19:23:55 lhecking Exp $";
#endif

/* GNUPLOT - win/wprinter.c */
/*[
 * Copyright 1992, 1993, 1998   Maurice Castro, Russell Lang
 *
 * Permission to use, copy, and distribute this software and its
 * documentation for any purpose with or without fee is hereby granted,
 * provided that the above copyright notice appear in all copies and
 * that both that copyright notice and this permission notice appear
 * in supporting documentation.
 *
 * Permission to modify the software is granted, but not the right to
 * distribute the complete modified source code.  Modifications are to
 * be distributed as patches to the released version.  Permission to
 * distribute binaries produced by compiling modified sources is granted,
 * provided you
 *   1. distribute the corresponding source modifications from the
 *    released version in the form of a patch file along with the binaries,
 *   2. add special version identification to distinguish your version
 *    in addition to the base release version number,
 *   3. provide your name and address as the primary contact for the
 *    support of your modified version, and
 *   4. retain our contact information in regard to use of the base
 *    software.
 * Permission to distribute the released version of the source code along
 * with corresponding source modifications in the form of a patch file is
 * granted with same provisions 2 through 4 for binary distributions.
 *
 * This software is provided "as is" without express or implied warranty
 * to the extent permitted by applicable law.
]*/

/*
 * AUTHORS
 * 
 *   Maurice Castro
 *   Russell Lang
 * 
 * Send your comments or suggestions to 
 *  info-gnuplot@dartmouth.edu.
 * This is a mailing list; to join it send a note to 
 *  majordomo@dartmouth.edu.  
 * Send bug reports to
 *  bug-gnuplot@dartmouth.edu.
 */

/* Dump a file to the printer */

#define STRICT
#include <windows.h>
#include <windowsx.h>
#if WINVER >= 0x030a
#include <commdlg.h>
#endif
#ifdef WIN32
#include <stdio.h>
#include <stdlib.h>
#endif
#ifdef __MSC__
#include <memory.h>
#else
#include <mem.h>
#endif
#include "wgnuplib.h"
#include "wresourc.h"
#include "wcommon.h"

LPPRINT prlist = NULL;

BOOL CALLBACK WINEXPORT PrintSizeDlgProc(HWND hdlg, UINT wmsg, WPARAM wparam, LPARAM lparam);
BOOL CALLBACK WINEXPORT
PrintSizeDlgProc(HWND hdlg, UINT wmsg, WPARAM wparam, LPARAM lparam)
{
	char buf[8];
	LPPRINT lpr;
	lpr = (LPPRINT)GetWindowLong(GetParent(hdlg), 4);

	switch (wmsg) {
		case WM_INITDIALOG:
			wsprintf(buf,"%d",lpr->pdef.x);
			SetDlgItemText(hdlg, PSIZE_DEFX, buf);
			wsprintf(buf,"%d",lpr->pdef.y);
			SetDlgItemText(hdlg, PSIZE_DEFY, buf);
			wsprintf(buf,"%d",lpr->poff.x);
			SetDlgItemText(hdlg, PSIZE_OFFX, buf);
			wsprintf(buf,"%d",lpr->poff.y);
			SetDlgItemText(hdlg, PSIZE_OFFY, buf);
			wsprintf(buf,"%d",lpr->psize.x);
			SetDlgItemText(hdlg, PSIZE_X, buf);
			wsprintf(buf,"%d",lpr->psize.y);
			SetDlgItemText(hdlg, PSIZE_Y, buf);
			CheckDlgButton(hdlg, PSIZE_DEF, TRUE);
			EnableWindow(GetDlgItem(hdlg, PSIZE_X), FALSE);
			EnableWindow(GetDlgItem(hdlg, PSIZE_Y), FALSE);
			return TRUE;
		case WM_COMMAND:
			switch (wparam) {
				case PSIZE_DEF:
					EnableWindow(GetDlgItem(hdlg, PSIZE_X), FALSE);
					EnableWindow(GetDlgItem(hdlg, PSIZE_Y), FALSE);
					return FALSE;
				case PSIZE_OTHER:
					EnableWindow(GetDlgItem(hdlg, PSIZE_X), TRUE);
					EnableWindow(GetDlgItem(hdlg, PSIZE_Y), TRUE);
					return FALSE;
				case IDOK:
					if (SendDlgItemMessage(hdlg, PSIZE_OTHER, BM_GETCHECK, 0, 0L)) {
						SendDlgItemMessage(hdlg, PSIZE_X, WM_GETTEXT, 7, (LPARAM)((LPSTR)buf));
						GetInt(buf, (LPINT)&lpr->psize.x);
						SendDlgItemMessage(hdlg, PSIZE_Y, WM_GETTEXT, 7, (LPARAM)((LPSTR)buf));
						GetInt(buf, (LPINT)&lpr->psize.y);
					}
					else {
						lpr->psize.x = lpr->pdef.x;
						lpr->psize.y = lpr->pdef.y;
					}
					SendDlgItemMessage(hdlg, PSIZE_OFFX, WM_GETTEXT, 7, (LPARAM)((LPSTR)buf));
					GetInt(buf, (LPINT)&lpr->poff.x);
					SendDlgItemMessage(hdlg, PSIZE_OFFY, WM_GETTEXT, 7, (LPARAM)((LPSTR)buf));
					GetInt(buf, (LPINT)&lpr->poff.y);

					if (lpr->psize.x <= 0)
						lpr->psize.x = lpr->pdef.x;
					if (lpr->psize.y <= 0)
						lpr->psize.y = lpr->pdef.y;

					EndDialog(hdlg, IDOK);
					return TRUE;
				case IDCANCEL:
					EndDialog(hdlg, IDCANCEL);
					return TRUE;
			}
			break;
	}
	return FALSE;
}



/* GetWindowLong(hwnd, 4) must be available for use */
BOOL
PrintSize(HDC printer, HWND hwnd, LPRECT lprect)
{
HDC hdc;
DLGPROC lpfnPrintSizeDlgProc ;
BOOL status = FALSE;
PRINT pr;

	SetWindowLong(hwnd, 4, (LONG)((LPPRINT)&pr));
	pr.poff.x = 0;
	pr.poff.y = 0;
	pr.psize.x = GetDeviceCaps(printer, HORZSIZE);
	pr.psize.y = GetDeviceCaps(printer, VERTSIZE);
	hdc = GetDC(hwnd);
	GetClientRect(hwnd,lprect);
	pr.pdef.x = MulDiv(lprect->right-lprect->left, 254, 10*GetDeviceCaps(hdc, LOGPIXELSX));
	pr.pdef.y = MulDiv(lprect->bottom-lprect->top, 254, 10*GetDeviceCaps(hdc, LOGPIXELSX));
	ReleaseDC(hwnd,hdc);
#ifdef WIN32
	if (DialogBox (hdllInstance, "PrintSizeDlgBox", hwnd, PrintSizeDlgProc)
#else
#ifdef __DLL__
	lpfnPrintSizeDlgProc = (DLGPROC)GetProcAddress(hdllInstance, "PrintSizeDlgProc");
#else
	lpfnPrintSizeDlgProc = (DLGPROC)MakeProcInstance((FARPROC)PrintSizeDlgProc, hdllInstance);
#endif
	if (DialogBox (hdllInstance, "PrintSizeDlgBox", hwnd, lpfnPrintSizeDlgProc)
#endif
		== IDOK) {
		lprect->left = MulDiv(pr.poff.x*10, GetDeviceCaps(printer, LOGPIXELSX), 254);
		lprect->top = MulDiv(pr.poff.y*10, GetDeviceCaps(printer, LOGPIXELSY), 254);
		lprect->right = lprect->left + MulDiv(pr.psize.x*10, GetDeviceCaps(printer, LOGPIXELSX), 254);
		lprect->bottom = lprect->top + MulDiv(pr.psize.y*10, GetDeviceCaps(printer, LOGPIXELSY), 254);
		status = TRUE;
	}
#ifndef WIN32
#ifndef __DLL__
	FreeProcInstance((FARPROC)lpfnPrintSizeDlgProc);
#endif
#endif
	SetWindowLong(hwnd, 4, (LONG)(0L));

	return status;
}

#ifdef WIN32
/* Win32 doesn't support OpenJob() etc. so we must use some old code
 * which attempts to sneak the output through a Windows printer driver */
void 
PrintRegister(LPPRINT lpr)
{
	LPPRINT next;
	next = prlist;
	prlist = lpr;
	lpr->next = next;
}

LPPRINT
PrintFind(HDC hdc)
{
	LPPRINT this;
	this = prlist;
	while (this && (this->hdcPrn!=hdc)) {
		this = this->next;
	}
	return this;
}

void
PrintUnregister(LPPRINT lpr)
{
	LPPRINT this, prev;
	prev = (LPPRINT)NULL;
	this = prlist;
	while (this && (this!=lpr)) {
		prev = this;
		this = this->next;
	}
	if (this && (this == lpr)) {
		/* unhook it */
		if (prev)
			prev->next = this->next;
		else
			prlist = this->next;
	}
}


/* GetWindowLong(GetParent(hDlg), 4) must be available for use */
BOOL CALLBACK WINEXPORT
PrintDlgProc(HWND hDlg, UINT message, WPARAM wParam, LPARAM lParam)
{
	LPPRINT lpr;
	lpr = (LPPRINT)GetWindowLong(GetParent(hDlg), 4);

	switch(message) {
		case WM_INITDIALOG:
			lpr->hDlgPrint = hDlg;
			SetWindowText(hDlg,(LPSTR)lParam);
			EnableMenuItem(GetSystemMenu(hDlg,FALSE),SC_CLOSE,MF_GRAYED);
			return TRUE;
		case WM_COMMAND:
			lpr->bUserAbort = TRUE;
			lpr->hDlgPrint = 0;
			EnableWindow(GetParent(hDlg),TRUE);
			EndDialog(hDlg, FALSE);
			return TRUE;
	}
	return FALSE;
}

	
BOOL CALLBACK WINEXPORT
PrintAbortProc(HDC hdcPrn, int code)
{
    MSG msg;
    LPPRINT lpr;
    lpr = PrintFind(hdcPrn);

    while (!lpr->bUserAbort && PeekMessage(&msg, 0, 0, 0, PM_REMOVE)) {
		if (!lpr->hDlgPrint || !IsDialogMessage(lpr->hDlgPrint,&msg)) {
        	TranslateMessage(&msg);
        	DispatchMessage(&msg);
		}
    }
    return(!lpr->bUserAbort);
}


/* GetWindowLong(hwnd, 4) must be available for use */
void WDPROC
DumpPrinter(HWND hwnd, LPSTR szAppName, LPSTR szFileName)
{
HDC printer;
PRINTDLG pd;
PRINT pr;
DOCINFO di;
char *buf;
WORD *bufcount;
int count;
FILE *f;
long lsize;
long ldone;
char pcdone[10];

	memset(&pd, 0, sizeof(PRINTDLG));
	pd.lStructSize = sizeof(PRINTDLG);
	pd.hwndOwner = hwnd;
	pd.Flags = PD_PRINTSETUP | PD_RETURNDC;

	if ((f = fopen(szFileName, "rb")) == (FILE *)NULL)
	   return;
	fseek(f, 0L, SEEK_END);
	lsize = ftell(f);
	if (lsize <= 0)
	    lsize = 1;
	fseek(f, 0L, SEEK_SET);
	ldone = 0;

	if (PrintDlg(&pd)) {
	printer = pd.hDC;
	if (printer != (HDC)NULL) {
	  pr.hdcPrn = printer;
	  SetWindowLong(hwnd, 4, (LONG)((LPPRINT)&pr));
	  PrintRegister((LPPRINT)&pr);
	  if ( (buf = malloc(4096+2)) != (char *)NULL ) {
	    	bufcount = (WORD *)buf;
		EnableWindow(hwnd,FALSE);
		pr.bUserAbort = FALSE;
/* is parent set correctly */
		pr.hDlgPrint = CreateDialogParam(hdllInstance,"CancelDlgBox",hwnd,PrintDlgProc,(LPARAM)szAppName);
		SetAbortProc(printer, PrintAbortProc);
		di.cbSize = sizeof(DOCINFO);
		di.lpszDocName = szAppName;
		di.lpszOutput = NULL;
		if (StartDoc(printer, &di) > 0) {
		    while ( pr.hDlgPrint && !pr.bUserAbort 
			&& (count = fread(buf+2, 1, 4096, f)) != 0 ) {
			*bufcount = count;
			Escape(printer, PASSTHROUGH, count+2, (LPSTR)buf, NULL);
	    		ldone += count;
	    		sprintf(pcdone, "%d%% done", (int)(ldone * 100 / lsize));
	    		SetWindowText(GetDlgItem(pr.hDlgPrint, CANCEL_PCDONE), pcdone);
			if (pr.bUserAbort) 
			    AbortDoc(printer);
			else
			    EndDoc(printer);
		    }
		    if (!pr.bUserAbort) {
			EnableWindow(hwnd,TRUE);
			DestroyWindow(pr.hDlgPrint);
		    }
		    free(buf);
		}
	  }
	  DeleteDC(printer);
	  SetWindowLong(hwnd, 4, (LONG)(0L));
	  PrintUnregister((LPPRINT)&pr);
	}
	}
	fclose(f);
}


#else  /* !WIN32 */
/* documented in Device Driver Adaptation Guide */
/* Prototypes taken from print.h */
DECLARE_HANDLE(HPJOB);

HPJOB   WINAPI OpenJob(LPSTR, LPSTR, HPJOB);
int     WINAPI StartSpoolPage(HPJOB);
int     WINAPI EndSpoolPage(HPJOB);
int     WINAPI WriteSpool(HPJOB, LPSTR, int);
int     WINAPI CloseJob(HPJOB);
int     WINAPI DeleteJob(HPJOB, int);
int     WINAPI WriteDialog(HPJOB, LPSTR, int);
int     WINAPI DeleteSpoolPage(HPJOB);

/* Modeless dialog box - Cancel printing */
BOOL CALLBACK WINEXPORT
CancelDlgProc(HWND hDlg, UINT message, WPARAM wParam, LPARAM lParam)
{
    switch(message) {
	case WM_INITDIALOG:
	    SetWindowText(hDlg,(LPSTR)lParam);
	    return TRUE;
	case WM_COMMAND:
	    switch(LOWORD(wParam)) {
		case IDCANCEL:
		    DestroyWindow(hDlg);
		    return TRUE;
	    }
    }
    return FALSE;
}



/* Dialog box to select printer port */
BOOL CALLBACK WINEXPORT
SpoolDlgProc(HWND hDlg, UINT message, WPARAM wParam, LPARAM lParam)
{
LPSTR entry;
    switch(message) {
	case WM_INITDIALOG:
	    entry = (LPSTR)lParam;
	    while (*entry) {
		SendDlgItemMessage(hDlg, SPOOL_PORT, LB_ADDSTRING, 0, (LPARAM)entry);
		entry += lstrlen(entry)+1;
	    }
	    SendDlgItemMessage(hDlg, SPOOL_PORT, LB_SETCURSEL, 0, (LPARAM)0);
	    return TRUE;
	case WM_COMMAND:
	    switch(LOWORD(wParam)) {
		case SPOOL_PORT:
		    if (HIWORD(lParam) == LBN_DBLCLK)
			PostMessage(hDlg, WM_COMMAND, IDOK, 0L);
		    return FALSE;
		case IDOK:
		    EndDialog(hDlg, 1+(int)SendDlgItemMessage(hDlg, SPOOL_PORT, LB_GETCURSEL, 0, 0L));
		    return TRUE;
		case IDCANCEL:
		    EndDialog(hDlg, 0);
		    return TRUE;
	    }
    }
    return FALSE;
}

/* Print File to port */
void WDPROC
DumpPrinter(HWND hwnd, LPSTR szAppName, LPSTR szFileName)
{
#define PRINT_BUF_SIZE 4096
char *buffer;
char *portname;
int i, iport;
DLGPROC lpfnSpoolProc;
HPJOB hJob;
UINT count;
HFILE hf;
int error = FALSE;
DLGPROC lpfnCancelProc;
long lsize;
long ldone;
char pcdone[10];
MSG msg;
HWND hDlgModeless;

	if ((buffer = LocalAllocPtr(LHND, PRINT_BUF_SIZE)) == (char *)NULL)
	    return;
	/* get list of ports */
	GetProfileString("ports", NULL, "", buffer, PRINT_BUF_SIZE);
	/* select a port */
	lpfnSpoolProc = (DLGPROC)MakeProcInstance((FARPROC)SpoolDlgProc, hdllInstance);
	iport = DialogBoxParam(hdllInstance, "SpoolDlgBox", hwnd, lpfnSpoolProc, (LPARAM)buffer);
	FreeProcInstance((FARPROC)lpfnSpoolProc);
	if (!iport) {
		LocalFreePtr((void NEAR *)buffer);
		return;
	}
	portname = buffer;
	for (i=1; i<iport && lstrlen(portname)!=0; i++)
		portname += lstrlen(portname)+1;
	
	/* open file and get length */
	hf = _lopen(szFileName, OF_READ);
	if (hf == HFILE_ERROR) {
	    LocalFreePtr((void NEAR *)buffer);
	    return;
	}
	lsize = _llseek(hf, 0L, 2);
	(void)_llseek(hf, 0L, 0);
	if (lsize <= 0)
	    lsize = 1;

	hJob = OpenJob(portname, szFileName, (HDC)NULL);
	switch ((int)hJob) {
	    case SP_APPABORT:
	    case SP_ERROR:
	    case SP_OUTOFDISK:
	    case SP_OUTOFMEMORY:
	    case SP_USERABORT:
	        _lclose(hf);
		LocalFreePtr((void NEAR *)buffer);
	        return;
	}
	if (StartSpoolPage(hJob) < 0)
	    error = TRUE;

	ldone = 0;
	lpfnCancelProc = (DLGPROC)MakeProcInstance((FARPROC)CancelDlgProc, hdllInstance);
	hDlgModeless = CreateDialogParam(hdllInstance, "CancelDlgBox", hwnd, lpfnCancelProc, (LPARAM)szAppName);

	while (!error && hDlgModeless && IsWindow(hDlgModeless)
          && ((count = _lread(hf, buffer, PRINT_BUF_SIZE))!= 0) ) {
	    wsprintf(pcdone, "%d%% done", (int)(ldone * 100 / lsize));
	    SetWindowText(GetDlgItem(hDlgModeless, CANCEL_PCDONE), pcdone);
	    if (WriteSpool(hJob, buffer, count) < 0)
		error = TRUE;
	    ldone += count;
	    while (IsWindow(hDlgModeless) && PeekMessage(&msg, hDlgModeless, 0, 0, PM_REMOVE)) {
	        if (!IsDialogMessage(hDlgModeless, &msg)) {
		    TranslateMessage(&msg);
		    DispatchMessage(&msg);
		}
	    }
	}
	LocalFreePtr((void NEAR *)buffer);
	_lclose(hf);

	if (!hDlgModeless || !IsWindow(hDlgModeless))
	    error=TRUE;
	if (IsWindow(hDlgModeless))
	    DestroyWindow(hDlgModeless);
	hDlgModeless = 0;
	FreeProcInstance((FARPROC)lpfnCancelProc);
	EndSpoolPage(hJob);
	if (error)
	    DeleteJob(hJob, 0);
	else
	    CloseJob(hJob);
}
#endif /* !WIN32 */