Annotation of OpenXM_contrib/pari-2.2/MACHINES, Revision 1.2
1.1 noro 1: This file gives information about architectures/operating systems GP has been
2: compiled on. If your configuration is not listed, it means that nobody sent us
3: information about it, definitely not that building won't work a priori.
4: If indeed GP builds successfuly, we'd be grateful if you could notify us
5: (including a line analogous to the ones below), so that we can accordingly
6: expand the list.
7:
8: General notes:
9: - Arch
10: a star (*) in the first column means GP was built using portable kernel.
11:
12: - Bench, as output by `make bench'
1.2 ! noro 13: 1) can vary with load, available memory, compiler version ...
! 14: 2) is not the actual time spent: bench "nfields" is weighted by 1/5.
! 15: 3) An ! present next to the timing means that install() did not work with
! 16: that configuration ([BUG] in 'program' bench)
1.1 noro 17:
18: NOTE: bench timings in version 2.0.11 and 2.0.12 were not correct (given
19: between parentheses). Add about 25% to running times for comparison with
20: other versions.
21:
22: Clock frequency in MHz when known, in BM (BogoMIPS) otherwise.
1.2 ! noro 23: Bench
! 24: Arch / proc: OS: Compiler: sta: dyn: GP version:
1.1 noro 25: ==============================================================================
26: DEC/Alpha
1.2 ! noro 27: alpha21264c 1000MHz OSF1-V5.1 cc 990 1165 2.2.3 IS
! 28: alpha21264b 833MHz OSF1-V5.1 cc 1867 2099 2.1.1 JC
! 29: alpha21264 667Mhz FreeBSD-4.0 gcc 2626! 2656 2.0.20 IS
! 30: alpha21264 500MHz OSF1-V4.0 gcc-2.8.1 3178 3436 2.1.0 JC
! 31: alpha21264 500MHz OSF1-V4.0 gcc-2.95.3 1885 1980 2.2.1 GH
! 32: alpha21164a 600MHz Linux-2.4.9 gcc.2.96 4113 4097 2.2.3
! 33: alpha21164a 600MHz Linux-2.2.13 egcs 4270 4350 2.0.19(26)IS
! 34: alpha21164 600MHz OSF1-V4.0D cc 3996 4384 2.0.10 LG
! 35: alpha21164 533Mhz Linux 2.0.34 gcc (4294) (4385) 2.0.12 JC
! 36: alpha21164 500Mhz Linux-2.2.13 egcs-2.91.66 5167 5217 2.1.1
! 37: alpha21164 500Mhz Linux-2.2.13 gcc-2.95.3 4319 4253 2.2.2 (27)
! 38: alpha21064 172Mhz OSF1-3.0 cc 34104 35564 2.1.1
1.1 noro 39: ------------------------------------------------------------------------------
40: Sun/SPARC
1.2 ! noro 41: UltraSPARC60 450MHz Solaris-7 gcc 3970 4010 2.0.19 IS
! 42: UltraSPARC60 450MHz Solaris-7 cc 5070 5210 2.0.19 IS
! 43: UltraSPARC2i 440MHz Solaris-8 gcc-2.95.2 3914 4230 2.2.1
! 44: Ultra250 400MHz Solaris-7 gcc 4510 4560 2.0.19 IS
! 45: Ultra250 400MHz Solaris-7 cc 5950 6090 2.0.19 IS
! 46: UltraSPARC60 360MHz Solaris-2.6 gcc 5034 5209 2.0.16 IS
! 47: UltraSPARC60 360MHz Solaris-2.6 cc 6329 6453 2.0.16 IS
! 48: UltraSPARC2i 360MHz Solaris-7 egcs 5816 6286 2.0.16(17)HS
! 49: UltraSPARC2i 333MHz Solaris-7 gcc 5666 6818 2.0.20(18)
! 50: UltraSPARC10 300MHz Solaris-2.6 gcc (5932) (6102) 2.0.12 GN
! 51: UltraSPARC 300MHz Solaris-2.5 gcc 7643 7566 2.0.9 IS
! 52: UltraSPARC2 296MHz Solaris-2.5.1 gcc 6098 6277 2.0.16 IS
! 53: UltraSPARC2 296MHz Solaris-2.5.1 cc 7676 7869 2.0.16 IS
! 54: UltraSPARC2i 270MHz Solaris-7 gcc 9008 7860 2.0.16 IZ
! 55: UltraSPARC2i 270MHz Solaris-2.6 cc 9200 9970 2.0.10 LG
! 56: UltraSPARC2 248MHz Solaris-7 cc-5.0 9420 9692 2.0.18(13)GN
! 57: UltraSPARC2 248MHz Solaris-7 egcs 7218 7262 2.0.16 HS
! 58: UltraSPARC 200MHz Solaris-2.5.1 gcc 9226 9268 2.0.16 IS
! 59: UltraSPARC 200MHz Solaris-2.5.1 cc 11226 11755 2.0.16 IS
! 60: UltraSPARC 167MHz Solaris-2.6 gcc 10767 11218 2.0.16 IS
! 61: UltraSPARC 167MHz Solaris-2.6 cc 13677 13967 2.0.16 IS
! 62: UltraSPARC 167MHz Solaris-7 gcc-2.8.1 9044 9162 2.2.3
! 63: UltraSPARC 167MHz Solaris-2.5 g++ 13474 13418 2.0.9 (7) LG
! 64: UltraSPARC 167MHz Solaris-2.5 CC 15778! 16400! 2.0.9 LG
! 65: UltraSPARC 167MHz Solaris-2.5 cc 16241 17048 2.0.9 LG
! 66: UltraSPARC 143MHz Solaris-2.5 gcc-2.95.3 11905 11723 2.2.1
! 67:
! 68: SuperSPARC2 75MHz Solaris-2.5 gcc 16969 17013 2.0.10 LG
! 69: SuperSPARC 50Mhz Linux-2.2.14 gcc 41126 40854 2.0.18(20)BA
! 70: SuperSPARC 40MHz SunOS-4.1.3 gcc 31178 30456 2.0.19
! 71: SuperSPARC 40Mhz Solaris-2.5 gcc 31528 31576 2.0.16
! 72: TurboSPARC 170MHz Solaris-2.5 gcc 15907 16529 2.0.9 LG
! 73: MicroSPARC2 110MHz NextStep-v3 cc 37794! - 2.0.9 LG
! 74: MicroSPARC2 110MHz SunOS-4.1.4 gcc 31476 32123 2.0.9 LG
! 75: MicroSPARC2 110MHz Solaris-2.5 gcc-2.7.2 24197 24107 2.2.2
! 76: SPARCv7(SS2) 40MHz SunOS-4.1.3 gcc 115212! 115364 2.0.9 LG
! 77: SPARCv7(ELC) 33MHz SunOS-4.1.1 gcc 139406! - 2.0.8 GN
! 78: SPARCv7(SS400) ??? SunOS-4.1.4 gcc 107074 106494 2.0.16(19)DE
! 79: SPARCv7(HWS210) ??? Linux-2.2.5 gcc 98488! - 2.0.16(14)DE
1.1 noro 80: ------------------------------------------------------------------------------
81: Intel/x86
1.2 ! noro 82: AMD Athlon XP1800+ Linux-2.4.17 gcc-3.0.4 616 616 2.2.3 (30)PE
! 83: AMD Athlon MP1800+ Linux-2.4.9 gcc-2.96 696 688 2.2.3 (29)HC
! 84: AMD Athlon 1200MHz Linux-2.4.7 gcc-2.96 1002 992 2.1.2 CL
! 85: AMD Athlon 1100MHz Linux-2.4.2-2 gcc 1078 1076 2.1.1 DP
! 86: AMD Duron 1000MHz Linux-2.4.0 egcs 1364 1428 2.0.20 QL
! 87: AMD Athlon 850MHz Linux-2.2.17 gcc 1364 1342 2.1.0 JC
! 88: AMD Duron 700MHz Linux-2.4.0 egcs 2066 2138 2.0.20 QL
! 89: AMD Athlon 500MHz Linux-2.2.13 gcc 2736 2724 2.0.18 MS
! 90: AMD K6-2 350Mhz Linux-2.0.34 egcs (4856) (4756) 2.0.11 SH
! 91: AMD K6-2 350Mhz Linux-2.0.36 gcc 5154 4850 2.0.17
! 92: AMD K6 266MHz Linux-2.2.5 pgcc 5861 6001 2.0.16(16)IS
! 93: AMD K6 233Mhz Linux-2.2.14 gcc 6968 7158 2.0.18 QL
! 94: IBM/Cyrix 200MHz Linux-2.0.35 gcc 13190 13729 2.0.15 AP
! 95: PentiumIV 1600MHz Linux-2.4.18-3 gcc-2.96 938 960 2.2.4
! 96: PentiumIV 1400MHz Linux-2.4.4-4 gcc-2.95.3 1318 1354 2.1.3 HG
! 97: PentiumIII 1000MHz Linux-2.4.7-10 gcc-2.96 1104 1124 2.2.3
! 98: PentiumIII 933MHz Linux-2.2.15 egcs 1450 1485 2.0.20 IS
! 99: PentiumIII 800MHz Linux-2.2.14 egcs 1900 1882 2.0.20 CL
! 100: PentiumIII 800MHz Linux-2.2.19 gcc-2.96 1638 1624 2.1.2 OT
! 101: PentiumIII 733MHz Linux-2.2.14 egcs 2080 2090 2.0.19 IS
! 102: PentiumIII 533MHz Linux-2.2.14 gcc 2710 2730 2.0.19 IS
! 103: PentiumIII 500MHz Linux-2.2.12 egcs 3154 3176 2.0.18 HC
! 104: PentiumII 450MHz Linux-2.4.18 gcc-3.0.4 2348 2426 2.2.3 (31)PE
! 105: PentiumII 450MHz Linux-2.0.35 gcc 3220 3230 2.1.1 TT
! 106: PentiumII 400MHz Linux-2.3.99 gcc 3392 3410 2.0.20(25)GH
! 107: PentiumII 400MHz Linux-2.2.14 gcc 3886 3902 2.0.20 GH
! 108: PentiumII 366MHz Linux-2.2.16 gcc-2.95.2 4018 4118 2.1.3 HG
! 109: PentiumII 350MHz Linux-2.2.16 gcc-2.95.2 3760 3784 2.2.1
! 110: PentiumII 350MHz Win98 mingw-2.95.2 4412! - 2.1.0 (22)
! 111: PentiumII 350MHz Win98 + Cygwin1 gcc-2.95.2-5 4026! - 2.2.1
! 112: PentiumII 350MHz Win98 + RSX gcc 9436! - 2.0.20(24)
! 113: PentiumII 350Mhz Linux 2.0.36 pgcc-2.92.21 (3310) (3340) 2.0.12(11)PE
! 114: PentiumII 350Mhz Linux 2.0.36 egcs-2.92.21 (3352) (3402) 2.0.12(11)PE
! 115: PentiumII 350Mhz Linux 2.0.36 gcc (3600) (3610) 2.0.12 PE
! 116: PentiumII 333Mhz Linux-2.2.19 gcc-2.7 4446 4464 2.1.1 BA
! 117: PentiumII 333Mhz Linux-2.2.19 gcc-3.0.2 4104 4218 2.1.1 BA
! 118: PentiumII 300MHz NextStep-3.3 cc 5325! - 2.0.10
! 119: PentiumII 233MHz FreeBSD-2.2.5 gcc (6251) (6114) 2.0.11
! 120: PentiumII 233MHz Linux-2.0.35 gcc (7460) (7586) 2.0.12 HG
! 121: PentiumPro 200MHz Linux-2.2.12 egcs 2.91.66 6218 6274 2.2.3
! 122: Pentium 266Mhz Linux-2.0.29 gcc (7256) (7044) 2.0.11
! 123: Pentium 200MHz Linux-2.2.10 gcc 12062 12340 2.0.18 MS
! 124: Pentium 200Mhz NextStep-3.3 cc 16035! - 2.0.06 MS
! 125: Pentium 166MHz FreeBSD-2.2.5 gcc (15159) (14481) 2.0.11
! 126: Pentium 166MHz Solaris-2.6 gcc (13550) (13746) 2.0.12 GN
! 127: Pentium 133MHz Linux-1.2.8 gcc-2.7.2p (15448!) - 2.0.12 GN
! 128: Pentium 133MHz FreeBSD-2.2.5 gcc 15231 17259 2.0.10 KK
! 129: 486DX (Cyrix) 66MHz Linux 2.2.18 gcc 59078 60600 2.1.1 CC
! 130: 486DX2 50MHz Linux-2.0.33 gcc 213710 216224 2.0.9 LG
! 131: 486DX 50MHz DOS-5 + EMX gcc 77126! - 2.0.20
! 132: *i860 40MHz Concentrix cc 147989! - 2.0.9 LG
! 133: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1.1 noro 134: Intel/ARM
1.2 ! noro 135: *StrongARM 110MHz Linux-2.4.5 gcc-2.95.2 17162! - 2.1.1 BA
! 136: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
! 137: Intel/ia64
! 138: *Itanium 800MHz Linux-2.4.9 gcc-3.0.1 2557 2474 2.1.2 (28)BA
1.1 noro 139: ------------------------------------------------------------------------------
140: Motorola
1.2 ! noro 141: *MC68040 25MHz NextStep-v2 cc 250542! - 2.0.9 LG
! 142: MC68030 25MHz SunOS-4.0.3 gcc 683736! 685248 2.0.9 (4)
! 143: *MC68030 25MHz SunOS-4.0.3 gcc 1034136!1038368 2.0.9
1.1 noro 144: ------------------------------------------------------------------------------
145: IBM/POWER,PowerPC
1.2 ! noro 146: *PowerMac3,3 500MHz Linux-2.4.2 gcc 3742 3732 2.1.1 BA
! 147: *PPC800(G3) 400MHz Linux-2.4.3 gcc 4640 4624 2.2.0 GH
! 148: *PPC???(G3) 350MHz Mac OS X 10.1 gcc-2.95.2 5722! 2.1.2 NI
! 149: *PPC750(G3) 266MHz Linux-2.2.6 gcc 6944 6924 2.0.18 DE
! 150: *PPC604e 233MHz AIX-4.2 cc (8616!) - 2.0.12(3) GN
! 151: *PPC604 133MHz AIX-4.2 cc 21528! - 2.0.4 (3) GN
! 152: *PPC601 100MHz AIX-4.1 cc 21692! - 2.0.4 (3) GN
! 153: *PPC601 75MHz Linux-2.1.24 gcc 51810 52702 2.0.9 EK
! 154: *PPC601 66MHz AIX-3.2.5 cc 66280! - 2.0.4 (3) GN
! 155: *POWER2 66MHz AIX-4.2 cc 37592! - 2.0.4 (3) GN
! 156: ------------------------------------------------------------------------------
! 157: IBM/S390
! 158: *S390 630BM Linux-2.4.17 gcc-2.95.4 6764 6574 2.1.3 (33)BA
1.1 noro 159: ------------------------------------------------------------------------------
160: SGI/MIPS
1.2 ! noro 161: *R4000 50/70MHz IRIX-5.2 gcc 70764 70114 2.0.9 (1) TP
! 162: *R4000 50/70MHz IRIX-5.2 cc 81467 80176 2.0.9 (2) TP
! 163: *R10000 196Mhz IRIX-6.2 cc 15719 15581 2.0.13(12)BN
! 164: *R10000 196MHz IRIX-6.4 cc 8461 9856 2.0.10(8) TP
1.1 noro 165: ------------------------------------------------------------------------------
166: HP/PA-RISC
1.2 ! noro 167: HPPA9000/785 552MHz HPUX-11.00 gcc-2.9 8284 8460 2.2.4(34) IS
! 168: *HPPA8500 440MHz Linux-2.4.16 gcc-3.0.3 7558 7814 2.1.2 BA
! 169: HPPA9000/778 134MHz HPUX-10.20 cc 18898! 29138! 2.0.19(9)
! 170: *HPPA9000/778 134MHz HPUX-10.20 cc (23666!) - 2.0.12(10)
! 171: HPPA9000/735 100MHz HPUX-10.20 cc (25106!)(38898!)2.0.12(9)
! 172: HPPA9000/735 100MHz HPUX-09-07 cc 25714! - 2.0.16(15)IS
! 173: HPPA9000/720 ??? HPUX-10.20 cc 66138! - 2.0.9
! 174: *HPPA9000/720 ??? HPUX-10.20 cc 101114! 119626 2.0.9
! 175: HPPA9000/712 90MHz HPUX-10.20 cc (26756!)(45196!) 2.0.12(9)
! 176: *HPPA9000/712 ??? HPUX-10.10 gcc 66328! 71250! 2.0.5 (6)
! 177: *HPPA7100LC 60MHz NextStep-v3 cc 62866! - 2.0.10 LG
! 178: *HPPA7000 50MHz HPUX-09.05 cc 113406! 152778! 2.0.9 LG
1.1 noro 179: ------------------------------------------------------------------------------
180:
181: Notes:
182: ======
183: (1) uncomment the last PLOTLIBS= in Makefile
184: (2) same as above, compiled with cc -O2
185: (3) AIX/POWER versions built with cc options including
186: -qarch=com -qtune=601 (any other tuning makes them slower GN)
187: Addendum (IK): gcc 2.8.1 -O2 -DGCC_INLINE -mtune=604e produces a faster binary
188:
189: (4) Slightly different results in make bench (last decimal different in
190: 3 tests, due to a different mulsr())
191: (6) gcc -fPIC (otherwise /usr/bin/ld will not link the shared library)
192: (7) the `program' bench fails on "install(addii)". But if the symbol addii
193: is declared within extern "C" {} in paridecl.h, it works.
194:
195: (8) use
196: CC = cc -64 -DLONG_IS_64BIT
197: CFLAGS = -O -OPT:Olimit=2170
198: LD = cc -64
199: LDFLAGS = -O -L/usr/lib64
200: DLLD = cc -64
201: DLLDFLAGS = -shared -elf -no_unresolved -all -L/usr/lib64
202: CPP = cc -64 -E -I.
203:
204: (9) * for gp-dyn: couldn't find a way to produce PIC code with either
205: -- HP as, version HP92453-03 UX.10.20.05 (DAVIS) PA-RISC 2.0 Assembler
206: (+z, +Z ignored)
207: -- gcc-2.8.1 + gas-2.6 (hppa1.1-hp-hpux9.01), using BFD version 2.6
208: (-fPIC -shared ignored)
209:
210: (bad) FIX: in o-hpux.hppa/Makefile, move kernel.o from OBJS to OBJSGP.
211: Hence kernel.o has to be linked explicitly with all programs compiled with
212: libpari.sl
213:
214: * for gp-sta: remove +z from CFLAGS and LDFLAGS, final link only worked
215: with the following command line (there has to be a better way...):
216:
217: cc dummy.c -c
218: cc -o gp-sta -Wl,-a,archive -O dummy.o [... rest as produced by Configure]
219:
220: where dummy.c defines three dummy symbols (referenced in static libc):
221:
222: shl_findsym(){}
223: shl_unload(){}
224: shl_load(){}
225:
226: Whatever else I tried, linking failed:
227:
228: /usr/ccs/bin/ld: Data address is out of range for short load or store
229: Reference from: kernel.o(0x8) [for all symbols defined in level0.s]
230:
231: (10) compiled without +z flags
232:
1.2 ! noro 233: (11)
1.1 noro 234: CFLAGS (for egcs)= -O9 -malign-double -fschedule-insns2 -mpentium\
235: -march=pentium -fomit-frame-pointer -fno-strength-reduce\
236: -fno-inline-functions -fexpensive-optimizations
237: CFLAGS (for pgcc)= -O9 -malign-double -mk6 -fomit-frame-pointer\
238: -fno-strength-reduce -fno-inline-functions
239:
1.2 ! noro 240: Libc: 5.4.46. egcs/pgcc compiled with Haifa scheduler
1.1 noro 241: Binutils: 2.9.1.0.4 or 2.9.1.0.15
242:
243: (12) used LD = cc -Wl,-rpath,my_exotic_DLL_path
244:
1.2 ! noro 245: (13) use /opt/SUNWspro/bin/fpversion to get explicit recommended CFLAGS.
! 246: use -fsimple=1; the Sun FD6U2 cc 5.3 defaults to -fsimple=2 at higher
! 247: optimization levels, which is deadly to PARI.
! 248: (these options must be given _after_ the -fast macro if -fast is used, or the
! 249: -fast expansion will override them.)
1.1 noro 250:
1.2 ! noro 251: (14) use asmarch=sparcv7
! 252: (15) Configure defaults to hpux-none. Use Configure -a and specify the
1.1 noro 253: hppa kernel. Remove +z from compiler flags
1.2 ! noro 254: (16) CFLAGS = -mk6 -march=i586 -O6
! 255: (17) 256kb L2 Cache - Ultra U5
! 256: (18) 2 MB L2 Cache - Ultra U10
! 257: (19) replace err by pari_err in src/kernel/sparcv7/level0.S [in 2.0.16 or 17]
! 258: (20) asmarch incorrectly defaulted to MicroSPARC (bypassed using Configure -a)
! 259: (22) same machine as above, native binary compiled with mingw32-gcc-2.95.2
! 260: had to modify Odos/Makefile (to link with readline-4.0).
! 261: PROBLEMS:
1.1 noro 262: * when started from the shell, on ^C GP quits! OK when started from GUI
263: * stdin redirection from the shell (gp < file) doesn't work (SEGV in gp).
264: * ANSI escape sequences are printed "as is" (so don't enable colors)
1.2 ! noro 265: (24) same machine as above, using the RSX compatibility package
! 266: (25) Xeon
! 267: (26) RedHat-7.0 + alpha has a broken glibc-2.1.x [issquare(8388609^2) = 0 !]
1.1 noro 268: Updating to glibc-2.2 fixes the problem.
1.2 ! noro 269: (27) gcc-2.95.3 -O + new inline assembler [gcc-2.95.2 and gcc-2.95.3 -O3 both
! 270: produce a broken binary]
! 271: (28) gp-dyn: add -fPIC to CFLAGS [or linking fails].
! 272: gcc-2.96 fails
! 273: (29) added -mcpu=athlon -march=athlon to CFLAGS (very minor speedup).
! 274: clock frequency for Athlon 1800+ = 1530MHz
! 275: (30) cpu=Athlon XP1800+ Mandrake 8.1, Linux-2.4.17
! 276: CFLAGS= -fbranch-probabilities -fstrict-aliasing -falign-jumps
! 277: -foptimize-sibling-calls -fssa -maccumulate-outgoing-args
! 278: -minline-all-stringops
! 279: -march=athlon -O3 -DGCC_INLINE -Wall -Wno-implicit -fomit-frame-pointer
! 280:
! 281: (31) cpu=Pentium II 450@463 (FSB a 103mhz), Bi-Pro
! 282: Linux-2.4.18-rc2 + patches
! 283: CFLAGS= -fbranch-probabilities -O3 -DGCC_INLINE -Wall -Wno-implicit
! 284: -fstrict-aliasing -fssa -foptimize-sibling-calls -falign-jumps
! 285: -march=pentiumpro -maccumulate-outgoing-args -minline-all-stringops
! 286: -fomit-frame-pointer
! 287:
! 288: (32) gp-dyn: add -fPIC to CFLAGS [or linking fails].
! 289: Most gcc 2.95 ARM support lib have buggy (unsigned)%(unsigned)
! 290:
! 291: (33) LCDS System: 9672 G6 Model ZX7 (10 way processor, 32GB RAM)
! 292: DASD: Shark 2105-F20 (2.1 terabytes)
1.1 noro 293:
1.2 ! noro 294: (34) 64-bit executable
1.1 noro 295: =============================================================================
296: Contributors:
297: AW = Aleksander Wittlin
298: AP = Andreas Piotrowski
299: BA = Bill Allombert
300: BN = Balasubramanian Narasimhan
301: CC = Christian Cornelssen
302: CL = Christian Labesse
303: DE = Denis Excoffier
304: DP = David Purdy
305: EK = Emmanuel Kowalski
306: GH = Guillaume Hanrot
307: GN = Gerhard Niklasch
308: HC = Henri Cohen
309: HG = Herbert Gangl
310: HS = Hans Schaechl
311: IS = Igor Schein
312: JC = John Cremona
313: KK = Kimitoshi Kono
314: LG = Louis Granboulan
315: MS = Michael Stoll
1.2 ! noro 316: NI = Nathaniel Irons
1.1 noro 317: PE = Philippe Elbaz-Vincent
1.2 ! noro 318: OT = Olivier Thibault
1.1 noro 319: QL = Qing Liu
320: SH = Steve Harding
321: TP = Thomas Papanikolaou
322: TT = Tibor I. Toth
323: XR = Xavier Roblot
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to MACHINES CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM_contrib / pari-2.2