File: [local] / OpenXM_contrib / pari / Attic / Configure (download)
Revision 1.1.1.1 (vendor branch), Sun Jan 9 17:35:29 2000 UTC (24 years, 8 months ago) by maekawa
Branch: PARI_GP
CVS Tags: maekawa-ipv6, VERSION_2_0_17_BETA, RELEASE_20000124, RELEASE_1_2_1, RELEASE_1_1_3, RELEASE_1_1_2 Changes since 1.1: +0 -0
lines
Import PARI/GP 2.0.17 beta.
|
#! /bin/sh
#
# Configuration file for GP/PARI. (c) K.B & Ptitboul.
#
# Run Configure -help for Usage.
#
# The Configure included in Perl distribution (written by Larry Wall), as
# well as the autoconfig package (from the GNU team) were of much help in
# writing these config files. Thanks to all of them!
#
TOP=`pwd`
dflt_conf_file=dft.Config.in
# Directories
config_dir=config
src_dir=src
emacs_dir=emacs
doc_dir=doc
data_dir=data
extract_dir_list="$doc_dir $emacs_dir"
#
# Version number and patch level.
#
. $config_dir/version
rcsrevision="$version"
if test "0$patch" != 0; then rcsrevision="$version.$patch"; fi
cd $config_dir
####################### CONFIGURE - OPTIONS #################################
#
# Processing Options
#
fastread=yes
config_file=
optimization=full
prefix=/usr/local
which_graphic_lib=none
test -n "$GP_INSTALL_PREFIX" && prefix=$GP_INSTALL_PREFIX
while test $# -gt 0; do
case "$1" in
-l|-load) shift; initfile=$1;
cd $TOP
PATH=.:$PATH; export PATH
if test -z "$1";then initfile=$dflt_conf_file; fi
if test -r "$initfile"; then
. $initfile
if test ! -d $objdir; then mkdir $objdir; fi
. $config_dir/extract_files
exit 0
else
echo "Cannot read config file \"$initfile\"." >&2
exit 1
fi;;
-p|-prefix) shift; prefix=$1;;
--prefix=*|--prefi=*|--pref=*|--pre=*|--pr=*|--p=*)
prefix=`echo "$1" | sed -e 's/[-a-z]*=//'`;;
--disable-kernel) kernel=no;;
-a|-ask) fastread=no;;
-g) optimization=debugging;;
-pg) optimization=profiling;;
-rdll) DYNRELOC=yes;;
-h|-help|-\?)error=true;;
-v|-verbhelp)error=verb;;
-s|--static) DLLD=;;
-graphic) shift; which_graphic_lib=$1; graph_cmd=yes ;;
--graphic=*|--graphi=*|--graph=*|--grap=*|--gra=*|--gr=*|--g=*)
graph_cmd=yes
which_graphic_lib=`echo "$1" | sed -e 's/[-a-z]*=//'`;;
*) echo "*** Unrecognized option $1." >&2; error=true;;
esac
shift
done
case "$error" in
true) cat >&2 <<EOT
Usage: Configure [-ask|-help|-g|-pg] [ -load <filename> ] [ --prefix=<dir> ]
Options: names can be abbreviated to one character (e.g -h = -help)
-ask interactively ask for answers (defaults are still computed)
-help this message
-verbhelp a longer help message
-load specify a default config file (default $dflt_conf_file)
--static build static GP binary only
--prefix=<dir> install files in <dir>/... (default $prefix)
--graphic=<gr> which graphic library to use (default X11)
(none X11 sunview gnuplot)
Additional developer options:
-g creates debugging version
-pg creates profiling version
-rdll creates relocatable DLL (Cygwin32 only)
EOT
exit 1
;;
verb) cat >&2 <<EOT
Architecture, operating system and asm kernel.
Configure tries to detect what is the architecture of the machine (CPU type)
and what operating system it is running. Then, it decides whether an asm
kernel exists and should be used. You can override this with Configure -ask.
Which compiler will be used ?
Depending on the machine (architecture and operating system) and on what is
found in the path, a compiler is automatically chosen. If you set the
environment variable CC before typing Configure, it will be used instead.
EOT
exit 1
;;
esac
test "$fastread" = yes || cat <<EOT
==========================================================================
Beginning configuration questions for GP/PARI.
You will be asked some questions about your system. Most of the time, a list
of acceptable answers will be supplied as well as a default between brackets.
Type carriage return to accept these defaults.
Though the present script strives to prevent any fatal mistake on your part,
there's currently no easy way out if you make one. Your best bet is to press
Ctrl-C, then start again. Another possibility is to wait till the questions
end, edit the file "$dflt_conf_file", then run
Configure -load $dflt_conf_file
(which can be abbreviated to simply "Configure -l")
==========================================================================
EOT
####################### CONFIGURE - SHELL ###################################
if test -z "$OS2_SHELL"; then dir_sep=':' ; else dir_sep=';' ; fi
#
# Proper PATH setting
#
pth="\
/bin\
/usr/bin\
/usr/locateal/bin\
/usr/ucb\
/usr/locateal\
/usr/lbin\
/usr/5bin\
/etc\
/usr/etc\
/usr/gnu/bin\
/usr/new\
/usr/new/bin\
/usr/nbin\
/sys5.3/bin\
/sys5.3/usr/bin\
/bsd4.3/bin\
/bsd4.3/usr/ucb\
/bsd4.3/usr/bin\
/usr/bsd\
/bsd43/bin\
/opt/ansic/bin\
/usr/ccs/bin\
/usr/lib\
/usr/ucblib\
/lib\
/usr/ccs/lib\
/sbin\
/usr/sbin\
/usr/libexec\
"
for p in $pth
do
case "$dir_sep$PATH$dir_sep" in
*$dir_sep$p$dir_sep*) ;;
*) test -d $p && PATH=$PATH$dir_sep$p ;;
esac
done
PATH=.$dir_sep$PATH; export PATH
echo "Checking echo to see how to suppress newlines..."
if (echo "hi\c"; echo " ") | grep c >/dev/null 2>&1 ; then
echo "...using -n."; n=-n; c=
else
cat <<EOM
...using \c
EOM
n=; c='\c'
fi
if test "$fastread" != yes; then
echo $n ..."The star should be here-->$c"; echo '*'
fi
#
# We might need the following :
#
echo Looking for some tools first ...
list='ld zcat gzip ranlib perl emacs'
pathspace=`echo $PATH | sed -e "s/$dir_sep/ /g" | sed -e 's,\\\\,/,g'`
for file in $list; do
x=`./locate $file '' $pathspace`
eval $file=$x
case $x in
# support also DOS filesystems (hard drive prepended)
?:/*|/*) echo ..."$file is $x";;
*) echo ..."I could not find $file." >&2;;
esac
done
if test -z "$zcat" -a -n "$gzip"; then zcat="$gzip -dc"; fi
####################### CONFIGURE - ARCHITECTURE ############################
#
# Testing Architectures. Try uname to provide a default, then ask user.
#
arch=none; osname=unknown
myuname=`(uname -a) 2>/dev/null || arch 2>&1`
if test -d /NextApps; then myuname=nextstep; fi
if test -n "$myuname"; then
myuname=`echo $myuname | sed -e 's/^[^=]*=//' -e 's,/,,g' | \
tr '[A-Z]' '[a-z]' | tr '\012' ' '`
set X $myuname; shift; osname=$1
case "$osname" in
irix*) osname=irix;;
fx2800) arch=fx2800; osname=concentrix;;
hp*) arch=hppa; osname=hpux;;
freebsd|os2) arch=ix86;;
ultrix) arch=mips;;
nextstep) arch=`file /bin/sh | sed 's/.*(for architecture \(.*\))/\1/'`;;
osf1) case "$5" in alpha) arch=alpha;; esac;;
cygwin*) arch=$HOSTTYPE;;
linux) arch=`uname -m`
case "`cat /proc/cpuinfo`" in
*TMS390Z5[05]*) arch=sparcv8_super;; # SuperSparc I or II
*TMS390S1[05]*) arch=sparcv8_micro;; # MicroSparc I
*MB86904*) arch=sparcv8_micro;; # MicroSparc II
*MB86907*) arch=sparcv8_micro;; # TurboSparc
*MB86934*) arch=sparcv8_super;; # SparcLite
*RT625*) arch=sparcv8_super;; # HyperSparc
*CY605*) arch=sparcv8_super;;
esac;;
sunos) case "$3" in 5*) osname=solaris;; esac
case "$5" in
sun3*) arch=m68k;;
sun4|sun4[ce]) arch=sparcv7;;
sun4[dm]) cpu="TI,|FMI,|Cypress,|Ross,"
case "`(prtconf||devinfo)2>&- |egrep $cpu`" in
*TI,TMS390Z5[05]*) arch=sparcv8_super;; # SuperSparc I or II
*TI,TMS390S1[05]*) arch=sparcv8_micro;; # MicroSparc I
*FMI,MB86904*) arch=sparcv8_micro;; # MicroSparc II
*FMI,MB86907*) arch=sparcv8_micro;; # TurboSparc
*FMI,MB86934*) arch=sparcv8_super;; # SparcLite
*Ross,RT625*) arch=sparcv8_super;; # HyperSparc
*Cypress,CY605*) arch=sparcv8_super;;
*) arch=sparcv8;;
esac;;
sun4u) arch=sparcv9;;
i*pc) arch=ix86;;
*) case "$4" in sun) arch=m68k;; esac;;
esac;;
esac
fi
if test "$fastread" != yes; then
cat << EOM
==========================================================================
Currently supported architectures:
EOM
rep='none sparcv7 sparcv8_super sparcv8_micro sparcv9
m68k ix86 i386 i486 i586 i686 hppa alpha mips fx2800'
. ./display
echo $n ..."Which of these apply, if any ? $c"
dflt=$arch; . ./myread; arch=$ans
fi
#
# Test OS, using the info uname provided.
#
if test "$fastread" != yes; then
cat << EOM
==========================================================================
I know of the following Operating Systems
EOM
rep='os2 freebsd cygwin linux hpux aix osf1 solaris sunos nextstep concentrix irix';
. ./display
echo $n ..."Any of these apply ? $c"
dflt=$osname; . ./myread
osname=$ans
fi
#
# A pretty name for the architecture
# The asm file used (if any)
#
case "$arch" in
sparc) asmarch=sparcv8_micro; pretty=Sparc ;;
sparcv7) asmarch=$arch; pretty=SparcV7 ;;
sparcv8_micro) asmarch=$arch; pretty=MicroSparc ;;
sparcv8_super) asmarch=$arch; pretty=SuperSparc ;;
sparcv9) asmarch=sparcv8_micro; pretty=UltraSparc ;;
m68k) asmarch=$arch; pretty="MC680x0, x>=2" ;;
i?86) asmarch=ix86 ; pretty=$arch ;;
hppa) asmarch=none ; pretty=HP
case "$osname-`uname -r`" in
hpux-?.09.*) asmarch=none ;;
hpux-?.10.*) asmarch=$arch ;;
esac ;;
alpha) asmarch=$arch; pretty=Alpha ;;
mips) asmarch=none; pretty=Mips ;;
fx2800) asmarch=none; pretty="Alliant FX/2800" ;;
none) asmarch=none; pretty="unknown" ;;
*) asmarch=none; pretty=$arch
echo " Warning ! architecture $arch not tested";;
esac
#
# Modifications for pretty name and asm file
#
case "$osname" in
cygwin*|linux|freebsd|os2) pretty="$pretty running $osname";;
nextstep) pretty="$pretty running $osname";
if test "$arch" = m68k; then asmarch=none; fi ;;
esac
if test "$kernel" = no; then
asmarch=none;
echo "assembler micro kernel disabled"
else
if test "$fastread" != yes; then
cat << EOM
==========================================================================
An optimized Pari kernel is available for these architectures
("none" means that we will use the portable C version of GP/PARI)
EOM
rep='none sparcv7 sparcv8_super sparcv8_micro m68k ix86 alpha hppa'
. ./display
echo $n ..."Which of these apply, if any ? $c"
dflt=$asmarch; . ./myread; asmarch=$ans
cat << EOM
==========================================================================
EOM
fi
fi
case "$asmarch" in
none) prettyk="C portable";;
sparcv7) prettyk=SparcV7;;
sparcv8_super) prettyk=SuperSparc;;
sparcv8_micro) prettyk=MicroSparc;;
m68k) prettyk="MC680x0, x>=2";;
ix86) prettyk=ix86;;
hppa) prettyk=HPPA;;
alpha) prettyk=Alpha;;
ppc) prettyk=PPC;;
*) prettyk="$asmarch";;
esac
if test "$arch" != "$asmarch"; then
pretty="$pretty ($prettyk kernel)"
fi
echo "Building for architecture: $pretty"
case "$asmarch" in
sparc*) kern=$TOP/$src_dir/kernel
rm -f $kern/sparcv8_micro $kern/sparcv8_super
ln -s $kern/sparcv8 $kern/sparcv8_micro
ln -s $kern/sparcv8 $kern/sparcv8_super;;
esac
#
# Which copy, SHELL ?
#
case "$osname-$arch" in
os2-*) ln_s=cp; make_sh=sh; exe_suff=.exe; extraflag="-Zexe" ;;
cygwin*) ln_s="ln -s"; make_sh="/bin/sh"; exe_suff=.exe; extraflag="" ;;
*) ln_s="ln -s"; make_sh="/bin/sh"; exe_suff=; extraflag="" ;;
esac
####################### CONFIGURE - LIBRARIES ###############################
#
# Looking for libraries now
#
case "$osname" in
cygwin*) ver=`uname -r | cut -d. -f1`
cygtop=/Cygnus/cygwin/B$ver
if test ! -d $cygtop; then
cygtop=/Cygnus/cygwin-B$ver
if test ! -d $cygtop; then
echo ..."I could not find Cygwin top directory" >&2
fi
fi;;
esac
readline_enabledp="nil"
if test "$optimization" != profiling; then
# First, construct the PATHs
case "$osname" in
cygwin*) libpth="
$cygtop/H-${arch}-cygwin32/lib\
$cygtop/H-${arch}-cygwin32/${arch}-cygwin32/lib\
";;
os2) libpth=`echo $LIBRARY_PATH | sed 's/;/ /g' | sed 's,\\\\,/,g'`;;
*) libpth="\
/usr/local/lib\
/lib\
/usr/lib\
/opt/lib\
/opt/local/lib\
/opt/gnu/lib\
/lib/pa1.1\
/usr/lib/large\
/lib/large\
/usr/lib/small\
/lib/small\
/usr/ccs/lib\
/usc/ucblib\
/usr/shlib\
.\
";;
esac
if (xmkmf) >/dev/null 2>&1 && test -f Makefile; then
eval `make gp-X11 2> /dev/null | grep -v make`
rm -f Makefile Makefile.bak
x11pth="$usrlibdir $libdir";
fi
# We want these libraries:
#
echo Checking for optional libraries and headers...
# LIB: X11
pth=$x11pth
lib=X11; . ./locatelib
if test -f $Xincroot/X11/Xos.h -a -z "$graph_cmd"; then
which_graphic_lib=X11
test -n "$extralib" && echo ..."Extra Libraries are $extralib"
echo ..."Found X11 header files in $Xincroot/X11"
fi
pth=$libpth
# LIB: gnuplot
opth="$pth"
pth="$TOP/gnuplot-$osname-$arch $TOP/gnuplot $pth"
gpth="$pth"
lib=gnuplot; . ./locatelib
pth="$opth"
gnuplot_libs=
case $gnuplot in
/*|[c-z]:/*)
addgnuplot=gnuplot
for lib in vga vesa jmgraph linuxvga gd png z
do
. ./locatelib
eval "elib=\$$lib"
case $elib in
/*|[c-z]:/*) gnuplot_libs="$gnuplot_libs -l$lib";;
esac
done
if test "$which_graphic_lib" = gnuplot; then
if test -z "$gnuplot_libs"; then
echo "...I expect that no libraries are needed for gnuplot"
else
echo "...I expect that libraries $gnuplot_libs are needed for gnuplot"
fi
fi
;;
*)
if test "$which_graphic_lib" = gnuplot; then
echo "###"
echo "### Could not find gnuplot library in:"
echo "### ./gnuplot-$osname-$arch ./gnuplot"
echo "### $pth"
echo "###"
case "$osname" in
os2) tlib=gnuplot.a ;;
*) tlib=libgnuplot.a ;;
esac
echo "### You may need to execute"
echo "### ar cr $tlib version.o util.o term.o bitmap.o stdfn.o"
echo "### In the build directory of gnuplot-3.7, and move"
echo "### $tlib to ./gnuplot-$osname-$arch or ./gnuplot subdirs"
echo "###"
fi
;;
esac
# LIB: GNU ReadLine
readline_add="$GP_READLINE $TOP/readline-$osname-$arch $TOP/readline"
pth="$readline_add $pth"
lib=readline; . ./locatelib
rl_fullname=$try
addsunview=sunview
if test -n "$readline"; then
# Readline -- TermCap
if test -n "`(nm $rl_fullname | grep tgetent)2>/dev/null`"; then
lib=ncurses; . ./locatelib
if test -n "$try" -a -n "`(nm $try | grep tgetent)2>/dev/null`"; then
rl_ncurses=$ncurses
else
lib=termcap; . ./locatelib
rl_termcap=$termcap
fi
fi
# Readline -- Allocation
rl_liberty=`(nm $rl_fullname | grep alloca)2>/dev/null`
if test -n "$rl_liberty"; then
lib=iberty; . ./locatelib
if test -z "$try"; then rl_liberty=; fi
fi
# Readline -- Version
if (nm $rl_fullname | grep "\<_rl_copy\>")2>/dev/null; then addsunview=; fi
# Readline -- Headers
case "$osname" in
os2) incpth=`echo $C_INCLUDE_PATH | sed -e 's/\([^;]\)$/\1;/g' -e 's%;%/readline %g' -e 's,\\\\,/,g'` ;;
cygwin*) incpth="\
$cygtop/include/readline\
$cygtop/include\
$cygtop/H-${arch}-cygwin32/${arch}-cygwin32/include\
";;
*) incpth="\
/usr/local/include/readline\
/usr/include/readline\
/opt/include/readline\
/opt/local/include/readline\
/opt/gnu/include/readline\
/usr/unsupported/include/readline\
/usr/local/include\
/usr/include\
/opt/include\
/opt/local/include\
/opt/gnu/include\
";;
esac
pth="$readline_add $incpth"
x=`./locate 'readline.h' '' $pth`
CPPF_defined=
case $x in
?:/*|/*) rl_include=`echo $x | sed 's,/readline.h,,'`
if (grep CPPFunction $x > /dev/null 2>&1); then CPPF_defined=yes; fi
if (grep rl_message $x > /dev/null 2>&1); then rl_message=yes; fi
if (grep "rl_refresh_line *()" $x > /dev/null 2>&1); then
rl_refresh_line_oldproto=yes
fi
if (grep rl_completion_append_character $x > /dev/null 2>&1); then
rl_appendchar=yes
fi
if (grep rl_save_prompt $x > /dev/null 2>&1); then
rl_save_prompt=yes;
else
_rl_save_prompt=`(nm $rl_fullname | grep rl_save_prompt)2>/dev/null`
fi;;
*) echo ..."But no header file has been found"
readline=;;
esac
fi
if test -n "$readline"; then
echo ..."Found GNU readline header in $rl_include"
if (echo $rl_include | grep "readline$" > /dev/null); then
rl_include=`echo $rl_include | sed 's,/readline$,,'`
RLINCLUDE="-I$rl_include"
else
# in case headers are not installed correctly
RLINCLUDE="-I$rl_include -DREADLINE_LIBRARY"
fi
RLLIBS="-L$readline -lreadline"
if test -n "$rl_ncurses"; then
echo ..."Library ncurses needed by readline"
RLLIBS="$RLLIBS -lncurses"
fi
if test -n "$rl_termcap"; then
echo ..."Library termcap needed by readline"
RLLIBS="$RLLIBS -ltermcap"
fi
if test -n "$rl_liberty"; then
echo ..."Library liberty needed by readline"
RLLIBS="$RLLIBS -liberty"
fi
if test -z "$rl_appendchar"; then
echo ..."Library readline does not have completion_append_char"
fi
if test -z "$rl_save_prompt"; then
echo ..."Library readline does not have rl_save_prompt"
if test -n "$_rl_save_prompt"; then
echo ......"but it has _rl_save_prompt"
fi
fi
if test "$fastread" != yes; then
cat << EOM
==========================================================================
EOM
test -z "$addsunview" && cat <<EOT
Your readline library won't compile with sunview. You have four choices :
1) Avoid choosing sunview as your graphic lib (by the way, I won't let you).
2) Fetch a new readline (version number at least 2.0)
3) Recompile your GNU readline library, replacing rl_copy in the file
readline.c by some weird name (GNU chose rl_copy_text in later versions).
4) Answer "n" to the following question (not recommended).
EOT
echo $n "Do you want to use GNU readline library within GP ? $c"
rep='y n'; dflt=y; . ./myread
case $ans in
n) addsunview=sunview; readline=;;
esac
fi
fi
if test -n "$readline"; then readline_enabledp="t"; fi
# Graphic libs now.
#
if test "$fastread" != yes; then
if test -n "$X11"; then addX11=X11; fi
cat << EOT
==========================================================================
GP contains high resolution plotting functions. Choose among
none $addX11 $addsunview $addgnuplot
EOT
echo $n ..."Use which graphic library (\"none\" means no hi-res plot) ? $c"
rep="none $addX11 $addsunview $addgnuplot";
dflt=$which_graphic_lib; . ./myread
which_graphic_lib=$ans
case "$which_graphic_lib" in
X11)
gnuplot=;
# If xmkmf did not give the right answer
# X11 -- Headers
if test ! -f $Xincroot/X11/Xos.h; then
x11pth="\
/usr/openwin/share/lib\
/usr/openwin/lib\
/usr/X11R6/lib\
/usr/X11R5/lib\
/usr/X11R4/lib\
/usr/lib/X11R6\
/usr/lib/X11R5\
/usr/lib/X11R4\
/usr/local/X11R6/lib\
/usr/local/X11R5/lib\
/usr/local/X11R4/lib\
/usr/local/lib/X11R6\
/usr/local/lib/X11R5\
/usr/local/lib/X11R4\
/usr/X11/lib\
/usr/lib/X11\
/usr/local/X11/lib\
/usr/local/lib/X11\
/usr/X386/lib\
/usr/x386/lib\
/usr/XFree86/lib/X11\
/usr/lib\
/usr/local/lib\
/usr/unsupported/lib\
/usr/athena/lib\
/usr/local/x11r5/lib\
/usr/lpp/Xamples/lib\
";
pth=`echo $x11pth | s,/lib,/include,g`
x=`./locate X11/Xos.h '' $pth`
case $x in
/*) Xincroot=`echo $x | sed 's,/X11/Xos.h,,'`;;
*) Xincroot=;;
esac
if test -n "$Xincroot"; then
echo ..."Found X11 header files in $Xincroot/X11"
fi
fi
# X11 -- Lib
if test -f $Xincroot/X11/Xos.h -a -z "$X11"; then
pth=$x11pth;
lib=X11; . ./locatelib
fi ;;
gnuplot);;
*)gnuplot=;;
esac
else # fastread = yes
if test "$which_graphic_lib" = none -a -z "$graph_cmd" -a -n "$gnuplot"; then
which_graphic_lib=gnuplot
fi
if test -z "$X11" -a -z "$gnuplot" -a -z "$readline"; then
echo ...none
fi
fi
fi
####################### CONFIGURE - COMPILATION #############################
#
# Which optimization ?
#
if test "$fastread" != yes; then
cat << EOT
==========================================================================
The default is to fully optimize the compilation. You may choose to build
an executable for debugging or profiling instead. Choose among :
full debugging profiling
EOT
echo $n ..."Which optimization do you prefer ? $c"
dflt=$optimization; rep='full debugging profiling'; . ./myread
optimization=$ans
fi
#
# Which Compiler ?
#
if test -z "$CC"; then
echo Looking for the compilers ...
# Native Compilers
cc=`./locate cc '' $pathspace`
case "$osname" in
hpux) if test "$cc" = /usr/ccs/bin/cc -a -f /opt/ansic/bin/cc; then
cc=/opt/ansic/bin/cc; fi ;; # This is a better compiler
esac
case "$cc" in ?:/*|/*) echo ..."cc is $cc";;
*) echo ..."I could not find cc.";; esac
# GNU Compilers
gcc=`./locate gcc '' $pathspace`
if test -z "$gcc"; then
exe=$osname-$arch-gnu$$
$cc $extraflag -o $exe gnu.c
if $exe; then gcc=$cc; fi; rm -f $exe
fi
case "$gcc" in
?:/*|/*) echo ..."gcc is $gcc";;
*) echo ..."I could not find gcc."; gcc=;;
esac
if test -n "$gcc"; then
__gnuc__=`$gcc -v 2>&1 | sed -n 's/.*version //p'`
if test -z "$__gnuc__"; then __gnuc__=unknown; fi
echo GNU compiler version $__gnuc__
fi
case "$osname" in
osf1|aix) __gnuc__=;; # Native compilers are faster
hpux) __gnuc__=;; # versions older than 2.7 cannot build PIC code
# gp built with recent versions has bugs
concentrix) case "$__gnuc__" in 2.[78].*);; *)
__gnuc__=;; esac;;
esac
# Choosing the compiler
if test -n "$__gnuc__"; then CC=$gcc; else CC=$cc; fi
fi
if test "$fastread" != yes; then
cat << EOT
==========================================================================
Only ANSI C and C++ compilers are supported. Choosing the GNU compiler
gcc/g++ enables the inlining of kernel routines (about 20% speedup; if you
use a recent g++, it's a good idea to include the -fpermissive flag).
If you choose not to use gcc, the C++ version of Pari will be a little
faster because of general inlining, but can be used in library mode only
with C++ programs (we really recommand using gcc all the way through).
EOT
echo $n ..."Which C compiler shall I use ? $c"
dflt=$CC; rep=; . ./myread
CC=$ans
fi
#
# Which Flags for Compiler ?
#
if test "$CC" != "$gcc"; then __gnuc__=; fi
if test -z "$__gnuc__"; then
exe=$osname-$arch-gnu$$
$CC $extraflag -o $exe gnu.c
if $exe; then __gnuc__=yes; fi
rm -f $exe
fi
if test -n "$__gnuc__"; then
__GNUC__="-D__GNUC__"
OPTFLAGS="-O2 -DGCC_INLINE"
DBGFLAGS="-g -Wall -Wno-implicit"
PRFFLAGS="-pg"
# Some architectures need -fPIC for building dynamic lib
case "$osname-$arch" in hpux-*) DLCFLAGS=-fPIC;; esac
# Specific optimisations for some architectures
case "$osname-$arch" in
linux-i?86|cygwin*) OPTFLAGS="-O3 -DGCC_INLINE -fexpensive-optimizations -malign-loops=2 -malign-jumps=2 -malign-functions=2";;
esac
case "$osname-$asmarch" in *-sparcv8*) CFLAGS="$CFLAGS -mv8" ;; esac
else
CFLAGS=
DBGFLAGS="-g"
PRFFLAGS="-pg"
case "$osname-$arch" in
hpux-*) # -Aa is for ANSI C, +z for PIC code (for commercial HPUX compilers)
OPTFLAGS=-O; CFLAGS=-Aa; DLCFLAGS=+z;;
# best tuning option, even for PPC604:
aix-*) OPTFLAGS=-O2; CFLAGS='-qlanglvl=ansi -qtune=601';;
cygwin*|linux-i?86|freebsd-i?86)
OPTFLAGS=-O2; CFLAGS=-m486;;
osf1-*) OPTFLAGS='-O4 -migrate -ifo -Olimit 9999';;
sunos-*) OPTFLAGS=-fast; PRFFLAGS='-pg -Bstatic';;
solaris-*) OPTFLAGS=-fast; PRFFLAGS=-xpg;;
concentrix-*) OPTFLAGS=-Ogi;;
*) OPTFLAGS=-O;;
esac
fi
CFLAGS="$CFLAGS $DLCFLAGS"
case "$osname" in
nextstep) CFLAGS="-traditional-cpp $CFLAGS";;
esac
case "$optimization" in
full) suffix=; cflags="$OPTFLAGS $CFLAGS";;
profiling) suffix=.prf; cflags="$OPTFLAGS $CFLAGS $PRFFLAGS";;
debugging) suffix=.dbg; cflags="-DMEMSTEP=1048576 $DBGFLAGS $CFLAGS";;
esac
if test "$fastread" != yes; then
echo $n ..."With which flags ? $c"
dflt=$cflags; rep=; . ./myread
cflags=$ans
fi
# Here we should check it is an ANSI compiler...
echo "C compiler is $CC $cflags"
#
# Which Assembler ?
#
if test -z "$AS"; then
echo Looking for an assembler ...
if test "$osname" = hpux
then AS=`./locate as '' /usr/ccs/bin /bin` # We don't want GNU as
else AS=`./locate as '' $pathspace`
fi
case "$AS" in ?:/*|/*) echo ..."as is $AS";;
*) echo ..."I could not find as." ;; esac
fi
gnuas=no
if (echo | $AS --version 2>&1 | grep GNU > /dev/null); then
gnuas=yes
else
if (echo | $AS -v 2>&1 | grep GNU > /dev/null); then
gnuas=yes
fi
fi
if test "$gnuas" = yes; then
echo "...Hum, this looks like GNU as"
case "$osname-$asmarch" in
solaris-sparc*) KERNELCPPFLAGS="-DNO_UNDERSCORE $__GNUC__";;
esac
else
case "$osname-$asmarch" in
osf1-alpha) ASFLAGS="-O1";;
sunos-sparc*) ASFLAGS="-P -I. $__GNUC__";;
solaris-sparc*) ASFLAGS="-P -I. $__GNUC__ -T";;
hpux-hppa) ASFLAGS="+DA1.1";;
*) ASFLAGS=;;
esac
fi
echo "Assembler is $AS $ASFLAGS"
#
# Which C PreProcessor ?
#
case "$osname" in
nextstep) cppfl="-traditional-cpp" ;;
freebsd)
if test $PORTOBJFORMAT = "elf"; then
cppfl="-DUSE_ELF"
fi ;;
esac
CPP="$cc $cppfl -E -I."
echo "C PreProcessor is $CPP"
#
# Which Executable Linker ?
#
LIBS=
case "$osname-$arch" in
linux-*|cygwin*)
LD=$CC; LDFLAGS="$cflags -Xlinker -export-dynamic"
runpathprefix='-Xlinker -rpath -Xlinker ';;
osf1-alpha)
LD=$ld; LIBS='-lots -lc';runpathprefix='-rpath '
case "$optimization" in
full|profiling)
LDFLAGS='-g0 -O4 -std0 -call_shared /usr/lib/cmplrs/cc/crt0.o';;
debugging)
LDFLAGS='-std0 -call_shared /usr/lib/cmplrs/cc/crt0.o';;
esac;;
solaris-*) LD=$CC; LDFLAGS=$cflags; runpathprefix=-R ;;
os2-*) LD=$CC; LDFLAGS="$cflags -Zexe" ;;
*) LD=$CC; LDFLAGS=$cflags ;;
esac
if test "$fastread" != yes; then
echo $n ..."Which linker for building executables ? $c"
dflt=$LD; rep=; . ./myread
LD=$ans
fi
#
# Which Flags for Executable Linker?
#
if test "$fastread" != yes; then
echo $n ..."With which flags ? $c"
dflt=$LDFLAGS; rep=; . ./myread
LDFLAGS=$ans
fi
echo "Executable linker is $LD $LDFLAGS"
if test "$optimization" = profiling; then DLLD=; else
DLLD=${DLLD-ld}
# Which suffix for Dynamic Lib?
# Some linkers (SunOS 4) need minor and major lib version numbers.
# Some others (SunOS 5) need a link from a .so
# Some others (HPUX 09) do not want version numbers.
#
case "$osname-$arch" in
# aix-*) DLSUFFIX=a ;; dynamic linking does not work!
hpux-*) DLSUFFIX=sl ;;
irix-*) DLSUFFIX=so ;;
sunos-*) DLSUFFIX=so; somake=.`echo $version| sed 's/\.//g'`.$patch ;;
linux-*|solaris-*|*-alpha)
DLSUFFIX=so; somake=.$version; sodest=.$patch ;;
freebsd-*)
if test $PORTOBJFORMAT = "elf"; then
somake=.`echo $version | sed 's/\..*//g'`
DLSUFFIX=so; sodest=.`echo $version | sed 's/.*\.//'`.$patch
FREEBSD_ELF=1
else
DLSUFFIX=so; somake=.$version; sodest=.$patch
FREEBSD_ELF=0
fi ;;
cygwin*) DLSUFFIX=dll; somake= ; sodest= ;;
*) DLLD=;;
esac
somake=$DLSUFFIX$somake
sodest=$somake$sodest
fi
if test -n "$DLLD"; then
# Which Dynamic Lib Linker?
#
if test $DLLD = ld -a -n "$ld"; then
DLLD=$ld;
fi
if test "$fastread" != yes; then
echo $n ..."Which linker for building dynamic libs? $c"
dflt=$DLLD; rep=; . ./myread
DLLD=$ans
fi
# Which Flags for Dynamic Lib Linker ?
#
if ($DLLD -v 2>&1 | grep GNU > /dev/null); then
echo "...Hum, this looks like GNU ld"
DLLDFLAGS="-shared -soname \$@"
else
# not GNU ld
case "$osname-$arch" in
aix-*) DLLDFLAGS="-r" ;;
hpux-*) DLLDFLAGS="-b -E" ;;
freebsd-*) DLLDFLAGS="-Bshareable -x" ;;
linux-*) DLLDFLAGS="-shared -soname \$@" ;;
irix-*) DLLDFLAGS="-shared -elf -no_unresolved -all" ;;
*-alpha) DLLDFLAGS="-shared"; EXTRADLLDFLAGS='${LIBS}'
case "$optimization" in
full) DLLDFLAGS="$DLLDFLAGS -O3" ;;
esac;;
sunos-*) DLLDFLAGS="-assert nodefinitions" ;;
solaris-*) DLLDFLAGS="-G -h \$@" ;;
*) DLLD=;;
esac
fi
if test "$fastread" != yes; then
echo $n ..."Which flags for linker? $c"
dflt=$DLLDFLAGS; rep=; . ./myread
DLLDFLAGS=$ans
fi
fi
if test -z "$DLLD"; then
echo "No Dynamic Lib"
static=y
else
echo "Dynamic Lib linker is $DLLD $DLLDFLAGS"
static=n
fi
if test "$fastread" != yes; then
cat << EOT
==========================================================================
Should you change your mind, you only need to modify the lines
CC="$CC"
CFLAGS="$cflags"
LD="$LD"
LDFLAGS="$LDFLAGS"
DLLD="$DLLD"
DLLDFLAGS="$DLLDFLAGS"
in the Makefile
==========================================================================
EOT
fi
####################### CONFIGURE - READLINE VERSION ########################
if test -n "$readline"; then
exe=$osname-$arch-rlv$$
$CC $extraflag $RLINCLUDE -o $exe rl_version.c $RLLIBS 2>/dev/null
if test -r $exe; then readline=`$exe`; else readline=1.0; fi
rm -f $exe
fi
####################### CONFIGURE - LIBC ####################################
#
# Long integer ?
#
endian=4321;
exe=$osname-$arch-endian$$
if ($CC $extraflag endian.c -o $exe 2>/dev/null); then
endian=`$exe`;
fi
rm -f $exe
if test "$fastread" != yes; then
cat << EOT
Determining sizeof(long) and endianness. If your hardware supports different
size of longs (e.g SGI/MIPS), you can decide to use a particular word size
by specifying endianness (e.g answer 4321 instead of the proposed 87654321).
You'll probably have to specify some exotic compilation flag (e.g -o32,-n32)
============================================================================
EOT
echo $n "What is the internal byte representation of long integer ? $c"
dflt=$endian; rep='12345678 87654321 1234 4321'; . ./myread
endian=$ans
fi
echo "The internal byte representation of your long integers is $endian."
case $endian in
*8|8*) sizeof_long=8; pretty="$pretty 64-bit version";;
*) sizeof_long=4; pretty="$pretty 32-bit version";;
esac
#
# Looking in C lib for some functions.
#
exe=$osname-$arch-tmp$$
echo Checking some common types...
list=ulong; . ./look
echo Looking in C lib for some symbols...
extra_flags=
list=exp2; . ./look
list=strftime; . ./look
list='getrusage times ftime'; . ./look
list='sigrelse sigsetmask'; . ./look
list=TIOCGWINSZ; . ./look
# For install(). Do we need libdl.so?
# on irix and osf1 -ldl not needed
extra_flags=
list=dlopen; . ./look
if test "$has_dlopen" = no; then
echo "Try again, with -ldl this time..."
extra_flags=-ldl; . ./look
if test "$has_dlopen" = yes; then
LIBS="-ldl $LIBS"
fi
fi
####################### CONFIGURE - MAKE ####################################
dflt=$prefix; rep=
test "$fastread" = yes || cat <<EOT
==========================================================================
By default, gp will be installed in $dflt/bin, manual pages under
$dflt/man, etc..., with $dflt as prefix for all installation directories.
If you wish to have binaries under /bin but manual pages under
/usr/local/man, that's ok: you will be prompted separately for each of the
installation directories, the prefix being only used to set the defaults.
(You will be prompted before the actual installation is done.)
The names of executables and libraries contain their version number $version.
A symbolic link to gp or libpari.[a/so] will point to the most recent
installation of GP/PARI.
EOT
echo $n "Installation prefix ? $c"
. ./myread; prefix=$ans
echo $n ..."\"gp\" executable ? $c"
dflt=$prefix/bin; . ./myread; bindir=$ans
echo $n ..."\"pari\" library ? $c"
dflt=$prefix/lib; . ./myread; libdir=$ans
echo $n ..."include files ? $c"
dflt=$prefix/include/pari; . ./myread; includedir=$ans
echo $n ..."manual pages ? $c"
dflt=$prefix/man/man1; . ./myread; mandir=$ans
echo $n ..."documentation, help scripts, and emacs macros ? $c"
dflt=$prefix/lib/pari; . ./myread; miscdir=$ans
echo $n ..."miscellaneous data (galois resolvents) ? $c"
dflt=$miscdir/data; . ./myread; datadir=$ans
if test "$fastread" != yes; then
if test -z "$DLLD"; then
cat <<EOT
==========================================================================
We cannot build a dynamic executable. We will build the static version.
EOT
else
cat <<EOT
==========================================================================
By default, we will try to build the shared library and gp will be an
executable dynamically linked with it. Do you prefer to have the static
archive libpari.a and a statically linked executable (which is a bit
faster, but takes more disk place) ?
You can always type "make all" in case you want both later.
EOT
echo $n "Do you want static executable and library ? $c"
dflt=$static; rep='y n'; . ./myread; static=$ans
fi
fi
case "$static" in
y) echo "Default is static executable and archive library, graphic=$which_graphic_lib" ;;
n) echo "Default is dynamic executable and shared library, graphic=$which_graphic_lib" ;;
esac
#
# Target directory
#
pre=O
case "$optimization" in
full) objdir=$pre$osname-$arch ;;
debugging) objdir=$pre$osname-$arch.dbg ;;
profiling) objdir=$pre$osname-$arch.prf ;;
esac
if test "$fastread" != yes; then
cat << EOT
==========================================================================
This is the name of the directory where all the object files will be :
EOT
echo $n ..."Enter dir name : $c"
dflt=$objdir; rep=; . ./myread
objdir=$ans
fi
#
# For dynamic linking, before and after installing
#
case "$osname" in
*cygwin*) LDDYN="-L$libdir -lpari_dll" ; runpath="$libdir" ;
DYNLIBS=-lpari_dll ; DYNFLAGS=-Dlibpari_USE_DLL ;;
*) LDDYN="-L$libdir -lpari" ; runpath="$libdir" ;;
esac
cat << EOT
==========================================================================
EOT
####################### CONFIGURE - SPIT ####################################
#
# Now spit out the results
#
cd $TOP
if test ! -d $objdir; then mkdir -p $objdir; fi
dflt_conf_file=$objdir/$dflt_conf_file
cat > $dflt_conf_file << EOT
# Config file for Pari $release -- $pretty
EOT
case "$osname" in
os2) shell_q='"'; echo "shell_q='\"'" >> $dflt_conf_file;;
*) shell_q="'"; echo "shell_q=\"'\"" >> $dflt_conf_file;;
esac
for variable in\
version TOP config_dir src_dir emacs_dir doc_dir\
bindir includedir mandir miscdir libdir datadir\
optimization objdir static suffix\
arch asmarch osname pretty\
__gnuc__ gnuas CPP AS ASFLAGS CC cflags DBGFLAGS OPTFLAGS LD LDFLAGS\
DLLD DLSUFFIX somake sodest KERNELCPPFLAGS DLLDFLAGS EXTRADLLDFLAGS\
runpath runpathprefix LDDYN LIBS DYNLIBS DYNFLAGS DYNRELOC\
ranlib gzip zcat emacs perl ln_s make_sh exe_suff\
readline readline_enabledp CPPF_defined rl_refresh_line_oldproto\
rl_appendchar rl_save_prompt _rl_save_prompt rl_message\
RLINCLUDE RLLIBS\
sizeof_long endian has_exp2\
has_getrusage has_times has_ulong has_ftime has_strftime\
has_sigrelse has_sigsetmask has_dlopen has_TIOCGWINSZ\
gnuplot extralib X11 Xincroot which_graphic_lib gnuplot_libs\
; do
eval "echo $variable=\'"'$'"$variable\'" \>\> $dflt_conf_file
done
. $config_dir/extract_files
#
# Building...
#
cat << EOT
==========================================================================
EOT
echo $n "Shall we try to build pari $version.$patch ($status) now (y/n)? $c"
dflt=n; rep='y n'; . $config_dir/myread
case $ans in
y) if (make gp); then
echo $n "Shall we install the files where they belong (y/n)? $c"
dflt=n; rep='y n'; . $config_dir/myread
case $ans in
y) make install;;
n) echo "Ok. Type \"make install\" when you are ready";;
esac
fi;;
n) echo "Ok. Type \"make install\" when you are ready";;
esac
echo 'Bye !'