Annotation of OpenXM_contrib/pari/doc/usersch1.tex, Revision 1.1
1.1 ! maekawa 1: \chapter{Overview of the PARI system}
! 2:
! 3: \section{Introduction}
! 4:
! 5: \noindent
! 6: The PARI system is a package which is capable of doing formal computations
! 7: on recursive types at high speed; it is primarily aimed at number
! 8: theorists, but can be used by anybody whose primary need is speed.
! 9:
! 10: Although quite an amount of symbolic manipulation is possible in PARI, this
! 11: system does very badly compared to much more sophisticated systems like
! 12: Axiom, Macsyma, Maple, Mathematica or Reduce on such manipulations
! 13: (e.g.~multivariate polynomials, formal integration, etc\dots). On the other
! 14: hand, the three main advantages of the system are its speed (which can be
! 15: between 5 and 100 times better on many computations), the possibility of
! 16: using directly data types which are familiar to mathematicians, and its
! 17: extensive algebraic number theory module which has no equivalent in the
! 18: above-mentioned systems.
! 19:
! 20: It is possible to use PARI in two different ways:
! 21:
! 22: \quad 1) as a library, which can be called from an upper-level language
! 23: application (for instance written in C, C$++$, Pascal or Fortran);
! 24:
! 25: \quad 2) as a sophisticated programmable calculator, named {\bf GP}, which
! 26: contains most of the control instructions of a standard language like C.
! 27:
! 28: The use of GP is explained in chapters 2 and 3, and the programming in library
! 29: mode is explained in chapters 3, 4 and 5. In the present Chapter 1, we give
! 30: an overview of the system.
! 31:
! 32: \subsectitle{Important note:} A tutorial for GP is provided in the standard
! 33: distribution (\kbd{tutorial.dvi}) and you should read this first (at
! 34: least the beginning of it, you can skip the specialized topics you're not
! 35: interested in). You can then start over and read the more boring stuff which
! 36: lies ahead. But you should do that eventually, at the very least the various
! 37: Chapter headings. You can have a quick idea of what is available by looking
! 38: at the GP reference card (\kbd{refcard.dvi} or \kbd{refcard.ps}). In case
! 39: of need, you can then refer to the complete function description in Chapter 3.
! 40:
! 41: \subsectitle{How to get the latest version?}
! 42:
! 43: \noindent
! 44: This package can be obtained by anonymous ftp from quite a number of sites
! 45: (ask \kbd{archie} or your favourite Web search engine for the site nearest to
! 46: you). But, if you want the very latest version (including development
! 47: versions), you should use the anonymous ftp address
! 48:
! 49: \kbd{ftp://megrez.math.u-bordeaux.fr/pub/pari}
! 50:
! 51: \noindent
! 52: where you will find all the different ports and possibly some
! 53: binaries. A lot of version information, mailing list archives, and various
! 54: tips can be found on PARI's (fledgling) home page:
! 55:
! 56: \kbd{\wwwsite}
! 57:
! 58: \subsectitle{Implementation notes:} (You can skip this section and switch to
! 59: \secref{se:start} if you're not interested in hardware technicalities. You
! 60: won't miss anything that would be mentioned here.)
! 61:
! 62: Version \vers{} of the PARI package contains essentially three versions. The
! 63: first one is a specific implementation for 680x0 based computers which
! 64: contains a kernel (for the elementary arithmetic operations on multiprecise
! 65: integers and real numbers, and binary/decimal conversion routines) entirely
! 66: written in MC68020 assembly language (around 6000 lines), the rest being at
! 67: present entirely written in ANSI C with a C++-compatible syntax. The system
! 68: runs on SUN-3/xx, Sony News, NeXT cubes and on 680x0 based Macs with
! 69: x$\ge$2. It should be very easy to port on any other 680x0 based machine
! 70: like for instance the Apollo Domain workstations.
! 71:
! 72: Note that the assembly language source code uses the SUN syntax, which for
! 73: some strange reason differs from the Motorola standard used by most other
! 74: 680x0 machines in the world. In the Mac distribution, we have included a
! 75: program which automatically converts from the SUN syntax into the standard
! 76: one, at least for the needed PARI assembly file. On the Unix distribution,
! 77: we have included other versions of the assembly file, using different
! 78: syntaxes. {\bf This version is not really maintained anymore since we lack
! 79: the hardware to update/test it.}
! 80:
! 81: The second version is a version where most of the kernel routines are written
! 82: in C, but the time-critical parts are written in a few hundred lines
! 83: of assembler at most. At present there exist three versions for the Sparc
! 84: architecture: one for Sparc version 7 (e.g.~Sparcstation 1, 1+, IPC, IPX or 2),
! 85: one for Sparc version 8 with supersparc processors (e.g.~Sparcstation 10
! 86: and 20) and one for Sparc version 8 with microsparc I or II processors
! 87: (e.g.~Sparcclassic or Sparcstation 4 and 5). No specific version is written
! 88: for the Ultrasparc since it can use the microsparc II version. In addition,
! 89: versions exist for the HP-PA architecture, for the PowerPC architecture
! 90: (only for the 601), for the Intel family starting at the 386 (under Linux,
! 91: OS/2, MSDOS, or Windows), and finally for the DEC Alpha 64-bit processors.
! 92:
! 93: Finally, a third version is written entirely in C, and should be portable
! 94: without much trouble to any 32 or 64-bit computer having no real memory
! 95: constraints. It is about 2 times slower than versions with a small assembly
! 96: kernel. This version has been tested for example on MIPS based DECstations
! 97: 3100 and 5000 and SGI computers.
! 98:
! 99: In addition to Unix workstations and Macs, PARI has been ported to a
! 100: considerable number of smaller and larger machines, for example the VAX,
! 101: 68000-based machines like the Atari, Mac Classic or Amiga 500, 68020 machines
! 102: such as the Amiga 2500 or 3000, and even to MS-DOS 386 or better machines,
! 103: using the \tet{EMX} port of the GNU C compiler and DOS-extender.
! 104:
! 105: \section{The PARI types}
! 106: \label{se:start}\sidx{types}
! 107:
! 108: \noindent
! 109: The crucial word in PARI is \idx{recursiveness}: most of the types it knows
! 110: about are recursive. For example, the basic type {\bf Complex} exists (actually
! 111: called \typ{COMPLEX}). However, the components (i.e.~the real and imaginary
! 112: part) of such a ``complex number'' can be of any type. The only sensible ones
! 113: are integers (we are then in $\Z[i]$), rational numbers ($\Q[i]$), real
! 114: numbers ($\R[i]=\C$), or even elements of $\Z/n\Z$ ($(\Z/n\Z)[i]$ when this
! 115: makes sense), or $p$-adic numbers when $p\equiv 3 \mod 4$ ($\Q_{p}[i]$).
! 116:
! 117: This feature must of course not be used too rashly: for example you are in
! 118: principle allowed to create objects which are ``complex numbers of complex
! 119: numbers'', but don't expect PARI to make sensible use of such objects: you
! 120: will mainly get nonsense.
! 121:
! 122: On the other hand, one thing which {\it is\/} allowed is to have components
! 123: of different, but compatible, types. For example, taking again complex
! 124: numbers, the real part could be of type integer, and the imaginary part of
! 125: type rational.
! 126:
! 127: By compatible, we mean types which can be freely mixed in operations like $+$
! 128: or $\times$. For example if the real part is of type real, the imaginary part
! 129: cannot be of type integermod (integers modulo a given number $n$).
! 130:
! 131: Let us now describe the types. As explained above, they are built recursively
! 132: from basic types which are as follows. We use the letter $T$ to designate any
! 133: type; the symbolic names correspond to the internal representations of the
! 134: types.\medskip
! 135: \settabs\+xxx&typexxxxxxxxxxxx&xxxxxxxxxxxxxxxx&xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx\cr
! 136: %
! 137: \+&type \typ{INT} \idxtyp{INT}:& $\Z$& Integers (with
! 138: arbitrary precision)\sidx{integer}\cr
! 139: %
! 140: \+&type \typ{REAL}\idxtyp{REAL}:& $\R$& Real numbers
! 141: (with arbitrary precision)\sidx{real number}\cr
! 142: %
! 143: \+&type \typ{INTMOD}\idxtyp{INTMOD}:& $\Z/n\Z$&
! 144: Integermods (integers modulo $n$)\sidx{integermod}\cr
! 145: %
! 146: \+&type \typ{FRAC}\idxtyp{FRAC}:& $\Q$& Rational numbers
! 147: (in irreducible form)\sidx{rational number}\cr
! 148: %
! 149: \+&type \typ{FRACN}\idxtyp{FRACN}:& $\Q$& Rational numbers
! 150: (not necessarily in irreducible form)\cr
! 151: %
! 152: \+&type \typ{COMPLEX}\idxtyp{COMPLEX}:& $T[i]$& Complex
! 153: numbers\sidx{complex number}\cr
! 154: %
! 155: \+&type \typ{PADIC}\idxtyp{PADIC}:& $\Q_p$&
! 156: $p$-adic\sidx{p-adic number} numbers\cr
! 157: %
! 158: \+&type \typ{QUAD}\idxtyp{QUAD}:& $\Q[w]$& Quadratic Numbers
! 159: (where $[\Z[w]:\Z]=2$)\sidx{quadratic number}\cr
! 160: %
! 161: \+&type \typ{POLMOD}\idxtyp{POLMOD}:& $T[X]/P(X)T[X]$&
! 162: Polmods (polynomials modulo $P$)\sidx{polmod}\cr
! 163: %
! 164: \+&type \typ{POL}\idxtyp{POL}:& $T[X]$& Polynomials
! 165: \sidx{polynomial}\cr
! 166: %
! 167: \+&type \typ{SER}\idxtyp{SER}:& $T((X))$& Power series
! 168: (finite Laurent series)\sidx{power series}\cr
! 169: %
! 170: \+&type \typ{RFRAC}\idxtyp{RFRAC}:& $T(X)$& Rational
! 171: functions (in irreducible form) \sidx{rational function}\cr
! 172: %
! 173: \+&type \typ{RFRACN}\idxtyp{RFRACN}:& $T(X)$& Rational functions
! 174: (not necessarily in irreducible form)\cr
! 175: %
! 176: \+&type \typ{VEC}\idxtyp{VEC}:& $T^n$& Row (i.e.~horizontal)
! 177: vectors\sidx{row vector}\cr
! 178: %
! 179: \+&type \typ{COL}\idxtyp{COL}:& $T^n$& Column (i.e.~vertical)
! 180: vectors\sidx{column vector}\cr
! 181: %
! 182: \+&type \typ{MAT}\idxtyp{MAT}:& ${\cal M}_{m,n}(T)$&
! 183: Matrices\sidx{matrix}\cr
! 184: %
! 185: \+&type \typ{LIST}\idxtyp{LIST}:& $T^n$&
! 186: Lists\sidx{list}\cr
! 187: %
! 188: \+&type \typ{STR}\idxtyp{STR}:& &
! 189: Character strings\sidx{string}\cr
! 190: \noindent
! 191: and where the types $T$ in recursive types can be different in each component.
! 192:
! 193: In addition, there exist types \typ{QFR}\idxtyp{QFR} and \typ{QFI}
! 194: \idxtyp{QFI} for binary quadratic forms of respectively positive and
! 195: negative discriminants,\sidx{binary quadratic form} which can be used in
! 196: specific operations, but which may disappear in future versions.
! 197:
! 198: \sidx{GEN} Every PARI object (called \kbd{GEN} in the sequel) belongs
! 199: to one of these basic types. Let us have a closer look.
! 200:
! 201: \subsec{Integers and reals}:\sidx{integer}\sidx{real number}
! 202: they are of arbitrary and varying length (each number carrying in its
! 203: internal representation its own length or precision)
! 204: with the following mild restrictions (given for
! 205: 32-bit machines, the restrictions for 64-bit machines being so weak as to be
! 206: considered inexistent): integers must be in absolute value less than
! 207: $2^{268435456}$ (i.e.~roughly 80807124 digits). The precision of real
! 208: numbers is also at most 80807124 significant decimal digits, and the binary
! 209: exponent must be in absolute value less than $2^{23}=8388608$.
! 210:
! 211: Note that PARI has been optimized so that it works as fast as possible on
! 212: numbers with at most a few thousand decimal digits. In particular, not too
! 213: much effort has been put into fancy multiplication techniques (only the
! 214: Karatsuba algorithm is implemented). Hence, although it is possible to use
! 215: PARI to do computations with 80000000 decimal digits, much better programs
! 216: can be written for such huge numbers.
! 217:
! 218: Integers and real numbers are completely non-recursive types and are
! 219: sometimes called the {\it\idx{leaves}}.
! 220:
! 221: \subsec{Integermods, rational numbers (irreducible or not),
! 222: $p$-adic numbers, polmods, and
! 223: rational functions}:\sidx{integermod}\sidx{rational number}\sidx{p-adic number}
! 224: \sidx{polmod} these are recursive, but in a restricted way.
! 225:
! 226: For integermods or polmods, there are two components: the modulus, which
! 227: must be of type integer (resp.\ polynomial), and the representative number
! 228: (resp.\ polynomial).
! 229:
! 230: For rational numbers or rational functions, there are also only two
! 231: components: the numerator and the denominator, which must both be of type
! 232: integer (resp.\ polynomial).
! 233:
! 234: \def\limproj{{\displaystyle\lim_{\textstyle\longleftarrow}}}
! 235:
! 236: Finally, $p$-adic numbers have three components: the prime $p$, the
! 237: ``modulus'' $p^k$, and an approximation to the $p$-adic number. Here $\Z_p$
! 238: is considered as $\limproj \Z/p^k\Z$, and $\Q_p$ as its field of
! 239: fractions. Like real numbers, the codewords contain an exponent (giving
! 240: essentially the $p$-adic valuation of the number) and also the information on
! 241: the precision of the number (which is in fact redundant with $p^k$, but is
! 242: included for the sake of efficiency).
! 243:
! 244: \subsec{Complex numbers and quadratic numbers}:
! 245: \sidx{complex number}\sidx{quadratic number}
! 246: quadratic numbers are numbers of the form $a+bw$, where $w$ is such that
! 247: $[\Z[w]:\Z]=2$, and more precisely $w=\sqrt d/2$ when $d\equiv 0 \mod 4$,
! 248: and $w=(1+\sqrt d)/2$ when $d\equiv 1 \mod 4$, where $d$ is the discriminant
! 249: of a quadratic order. Complex numbers correspond to the very important
! 250: special case $w=\sqrt{-1}$.\label{se:compquad}
! 251:
! 252: Complex and quadratic numbers are partially recursive: the two components
! 253: $a$ and $b$ can be of type integer, real, rational, integermod or $p$-adic,
! 254: and can be mixed, subject to the limitations mentioned above. For example,
! 255: $a+bi$ with $a$ and $b$ $p$-adic is in $\Q_p[i]$, but this is equal to
! 256: $\Q_p$ when $p\equiv 1 \mod 4$, hence we must exclude these $p$ when one
! 257: explicitly uses a complex $p$-adic type.
! 258:
! 259: \subsec{Polynomials, power series, vectors, matrices and lists}:
! 260: \sidx{polynomial}\sidx{power series}\sidx{vector}\sidx{matrix}
! 261: they are completely recursive: their components can be of any type, and types
! 262: can be mixed (however beware when doing operations). Note in particular that
! 263: a polynomial in two variables is simply a polynomial with polynomial
! 264: coefficients.
! 265:
! 266: Note that in the present version \vers{} of PARI, there is a bug in the
! 267: handling of power series of power series (i.e.~power series in several
! 268: variables). However power series of polynomials (which are power series in
! 269: several variables of a special type) are OK. The reason for this bug is
! 270: known, but it is difficult to correct because the mathematical problem itself
! 271: contains some amount of imprecision.
! 272:
! 273: \subsec{Strings}: These contain objects just as they would be printed by the
! 274: GP calculator.
! 275:
! 276: \subsec{Notes}:
! 277:
! 278: \subsubsec{Exact and imprecise objects}: \sidx{imprecise object}we have
! 279: already said that integers and reals are called the \idx{leaves} because they
! 280: are ultimately at the end of every branch of a tree representing a PARI
! 281: object. Another important notion is that of an {\bf \idx{exact object}}: by
! 282: definition, numbers of basic type real, $p$-adic or power series are
! 283: imprecise, and we will say that a PARI object having one of these imprecise
! 284: types anywhere in its tree is not exact. All other PARI objects will be
! 285: called exact. This is a very important notion since no numerical analysis is
! 286: involved when dealing with exact objects.
! 287:
! 288: \subsubsec{Scalar types}:\sidx{scalar type} the first nine basic types, from
! 289: \typ{INT} to \typ{POLMOD}, will be called scalar types because they
! 290: essentially occur as coefficients of other more complicated objects. Note
! 291: that type \typ{POLMOD} is used to define algebraic extensions of a base ring,
! 292: and as such is a scalar type.
! 293:
! 294: \subsubsec{What is zero?} This is a crucial question in all computer
! 295: systems. The answer we give in PARI is the following. For exact types, all
! 296: zeros are equivalent and are exact, and thus are usually represented as an
! 297: integer \idx{zero}. The problem becomes non-trivial for imprecise types. For
! 298: $p$-adics the answer is as follows: every $p$-adic number (including 0) has
! 299: an exponent $e$ and a ``mantissa'' (a purist would say a ``significand'') $u$
! 300: which is a $p$-adic unit, except when the number is zero (in which case $u$
! 301: is zero), the significand having a certain ``precision'' $k$ (i.e.~being
! 302: defined modulo $p^k$). Then this $p$-adic zero is understood to be equal to
! 303: $O(p^e)$, i.e.~there are infinitely many distinct $p$-adic zeros. The number
! 304: $k$ is thus irrelevant.
! 305:
! 306: For power series the situation is similar, with $p$ replaced by $X$, i.e.~a
! 307: power series zero will be $O(X^e)$, the number $k$ (here the length of the
! 308: power series) being also irrelevant.\label{se:whatzero}
! 309:
! 310: For real numbers, the precision $k$ is also irrelevant, and a real zero will
! 311: in fact be $O(2^e)$ where $e$ is now usually a negative binary exponent. This
! 312: of course will be printed as usual for a real number ($0.0000\cdots$ in
! 313: \kbd{f} format or $0.Exx$ in \kbd{e} format) and not with a $O()$ symbol as
! 314: with $p$-adics or power series.
! 315:
! 316: \section{Operations and functions}
! 317:
! 318: \subsec{The PARI philosophy}.
! 319: The basic philosophy which governs PARI is that operations and functions
! 320: should, firstly, give as exact a result as possible, and secondly, be
! 321: permitted if they make any kind of sense.
! 322:
! 323: More specifically, if you do an operation (not a transcendental one) between
! 324: exact objects, you will get an exact object. For example, dividing 1 by 3
! 325: does not give $0.33333\cdots$ as you might expect, but simply the rational
! 326: number $(1/3)$. If you really want the result in type real, evaluate $1./3$
! 327: or add $0.$ to $(1/3)$.
! 328:
! 329: The result of operations between imprecise objects will be as precise as
! 330: possible. Consider for example one of the most difficult cases, that is the
! 331: addition of two real numbers $x$ and $y$. The \idx{accuracy} of the result is
! 332: {\it a priori\/} unpredictable; it depends on the precisions of $x$ and $y$,
! 333: on their sizes (i.e.~their exponents), and also on the size of $x+y$. PARI
! 334: works out automatically the right precision for the result, even when it is
! 335: working in calculator mode GP where there is a \idx{default precision}.
! 336:
! 337: In particular, this means that if an operation involves objects of
! 338: different accuracies, some digits will be disregarded by PARI. It is a
! 339: common source of errors to forget, for instance, that a real number is
! 340: given as $r + 2^e \varepsilon$ where $r$ is a rational approximation, $e$ a
! 341: binary exponent and $\varepsilon$ is a nondescript real number less than 1 in
! 342: absolute value\footnote{*}{this is actually not quite true: internally, the
! 343: format is $2^b (a + \varepsilon)$, where $a$ and $b$ are integers}. Hence,
! 344: any number less than $2^e$ may be treated as an exact zero:
! 345:
! 346: \bprog%
! 347: ? 0.E-28 + 1.E-100
! 348: \%1 = 0.E-28
! 349: \eprog
! 350: \noindent As an exercise, if \kbd{a = 2\pow -100}, why do \kbd{a + 0.} and
! 351: \kbd{a * 1.} differ ?
! 352:
! 353: The second part of the PARI philosophy is that PARI operations are in general
! 354: quite permissive. For instance taking the exponential of a vector should not
! 355: make sense. However, it frequently happens that a computation comes out with a
! 356: result which is a vector with many components, and one wants to get the
! 357: exponential of each one. This could easily be done either under GP or in
! 358: library mode, but in fact PARI assumes that this is exactly what you want to
! 359: do when you take the exponential of a vector, so no work is necessary. Most
! 360: transcendental functions work in the same way (see Chapter 3 for details).
! 361:
! 362: An ambiguity would arise with square matrices. PARI always considers that you
! 363: want to do componentwise function evaluation, hence to get for example the
! 364: exponential of a square matrix you would need to use a function with a
! 365: different name, \kbd{matexp} for instance. In the present version \vers, this
! 366: is not yet implemented. See however the program in Appendix C, which is a
! 367: first attempt for this particular function.
! 368:
! 369: The available operations and functions in PARI are described in detail in
! 370: Chapter 3. Here is a brief summary:
! 371:
! 372: \subsec{Standard operations}.
! 373:
! 374: \noindent
! 375: Of course, the four standard operators \kbd{+}, \kbd{-}, \kbd{*}, \kbd{/}
! 376: exist. It should once more be emphasized that division is, as far as possible,
! 377: an exact operation: $4$ divided by $3$ gives \kbd{(4/3)}. In addition to
! 378: this, operations on integers or polynomials, like \b{} (Euclidean
! 379: division), \kbd{\%} (Euclidean remainder) exist (and for integers, {\b{/}}
! 380: computes the quotient such that the remainder has smallest possible absolute
! 381: value). There is also the exponentiation operator \kbd{\pow }, when the
! 382: exponent is of type integer. Otherwise, it is considered as a transcendental
! 383: function. Finally, the logical operators \kbd{!} (\kbd{not} prefix operator),
! 384: \kbd{\&\&} (\kbd{and} operator), \kbd{||} (\kbd{or} operator) exist, giving
! 385: as results \kbd{1} (true) or \kbd{0} (false). Note that \kbd{\&} and \kbd{|}
! 386: are also accepted as synonyms respectively for \kbd{\&\&} and \kbd{||}.
! 387: However, there is no bitwise \kbd{and} or \kbd{or}.
! 388:
! 389: \subsec{Conversions and similar functions}.
! 390:
! 391: \noindent
! 392: Many conversion functions are available to convert between different types.
! 393: For example floor, ceiling, rounding, truncation, etc\dots. Other simple
! 394: functions are included like real and imaginary part, conjugation, norm,
! 395: absolute value, changing precision or creating an integermod or a polmod.
! 396:
! 397: \subsec{Transcendental functions}.
! 398:
! 399: \noindent
! 400: They usually operate on any object in $\C$, and some also on $p$-adics.
! 401: The list is everexpanding and of course contains all the elementary
! 402: functions, plus already a number of others. Recall that by extension, PARI
! 403: usually allows a transcendental function to operate componentwise on vectors
! 404: or matrices.
! 405:
! 406: \subsec{Arithmetic functions}.
! 407:
! 408: \noindent
! 409: Apart from a few like the factorial function or the Fibonacci numbers, these
! 410: are functions which explicitly use the prime factor decomposition of
! 411: integers. The standard functions are included. In the present version \vers,
! 412: a primitive, but useful version of Lenstra's Elliptic Curve Method (ECM) has
! 413: been implemented.
! 414:
! 415: There is now a very large package which enables the number theorist to work
! 416: with ease in algebraic number fields. All the usual operations on elements,
! 417: ideals, prime ideals, etc\dots are available.
! 418:
! 419: More sophisticated functions are also implemented, like solving Thue
! 420: equations, finding integral bases and discriminants of number fields,
! 421: computing class groups and fundamental units, computing in relative number
! 422: field extensions (including explicit class field theory), and also many
! 423: functions dealing with elliptic curves over $\Q$ or over local fields.
! 424:
! 425: \subsec{Other functions}.
! 426:
! 427: \noindent
! 428: Quite a number of other functions dealing with polynomials (e.g.~finding
! 429: complex or $p$-adic roots, factoring, etc), power series (e.g.~substitution,
! 430: reversion), linear algebra (e.g.~determinant, characteristic polynomial,
! 431: linear systems), and different kinds of recursions are also included. In
! 432: addition, standard numerical analysis routines like Romberg integration (open
! 433: or closed, on a finite or infinite interval), real root finding (when the
! 434: root is bracketed), polynomial interpolation, infinite series evaluation, and
! 435: plotting are included. See the last sections of Chapter~3 for details.
! 436: \vfill\eject
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>