=================================================================== RCS file: /home/cvs/OpenXM_contrib2/asir2000/configure,v retrieving revision 1.51 retrieving revision 1.68 diff -u -p -r1.51 -r1.68 --- OpenXM_contrib2/asir2000/configure 2012/05/07 13:26:16 1.51 +++ OpenXM_contrib2/asir2000/configure 2019/03/23 12:17:15 1.68 @@ -1,11 +1,9 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.68. +# Generated by GNU Autoconf 2.69 for asir 1.15. # # -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software -# Foundation, Inc. +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation @@ -134,6 +132,31 @@ export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh @@ -167,7 +190,8 @@ if ( set x; as_fn_ret_success y && test x = \"\$1\" ); else exitcode=1; echo positional parameters were not saved. fi -test x\$exitcode = x0 || exit 1" +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && @@ -212,21 +236,25 @@ IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. - # Preserve -v and -x to the replacement shell. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL - case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; - esac - exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 fi if test x$as_have_required = xno; then : @@ -328,6 +356,14 @@ $as_echo X"$as_dir" | } # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take @@ -449,6 +485,10 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). @@ -483,16 +523,16 @@ if (echo >conf$$.file) 2>/dev/null; then # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. + # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' + as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null @@ -504,28 +544,8 @@ else as_mkdir_p=false fi -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x +as_test_x='test -x' +as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -555,12 +575,12 @@ MFLAGS= MAKEFLAGS= # Identity of this package. -PACKAGE_NAME= -PACKAGE_TARNAME= -PACKAGE_VERSION= -PACKAGE_STRING= -PACKAGE_BUGREPORT= -PACKAGE_URL= +PACKAGE_NAME='asir' +PACKAGE_TARNAME='asir' +PACKAGE_VERSION='1.15' +PACKAGE_STRING='asir 1.15' +PACKAGE_BUGREPORT='' +PACKAGE_URL='' ac_unique_file="LICENSE" # Factoring default headers for most tests. @@ -603,11 +623,13 @@ ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS +WSLIB asm_obj USE_GC_SPARC64 libasir_postfix LAPACKLIB FEPLIB +GMPLIB USE_PLOT_FALSE USE_PLOT_TRUE XPMLIB @@ -616,8 +638,6 @@ GREP PARILIB PARIINC GC_DISTDIR -USE_GC7_FALSE -USE_GC7_TRUE GC_CONFIGURE_ARGS GC GCINC @@ -636,10 +656,10 @@ LN_S am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE +am__nodep AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE -am__quote am__include DEPDIR OBJEXT @@ -652,6 +672,10 @@ CC MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V am__untar am__tar AMTAR @@ -724,19 +748,21 @@ PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR -SHELL' +SHELL +am__quote' ac_subst_files='' ac_user_opts=' enable_option_checking +enable_silent_rules enable_maintainer_mode enable_dependency_tracking with_x enable_shared with_asir_gc -with_gc7 with_distdir with_pari enable_plot +enable_static_gmp enable_interval enable_fft_float with_mpi @@ -793,7 +819,7 @@ sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE}' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' @@ -1208,8 +1234,6 @@ target=$target_alias if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used" >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -1295,7 +1319,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures this package to adapt to many kinds of systems. +\`configure' configures asir 1.15 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1343,7 +1367,7 @@ Fine tuning of the installation directories: --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] + --docdir=DIR documentation root [DATAROOTDIR/doc/asir] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] @@ -1369,19 +1393,27 @@ _ACEOF fi if test -n "$ac_init_help"; then - + case $ac_init_help in + short | recursive ) echo "Configuration of asir 1.15:";; + esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-maintainer-mode + enable make rules and dependencies not useful (and + sometimes confusing) to the casual installer + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build --enable-shared enable linking shared libraries. [no] --enable-plot enable plot feature. [no] + --enable-static-gmp force to link statically with gmp. [no] --enable-interval enable interval feature. [no] --enable-fft-float enable FFT-FLOAT feature. [no] @@ -1390,7 +1422,6 @@ Optional Packages: --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-x use the X Window System --with-asir-gc modify Boehm's GC [yes] - --with-gc7 use GC 7.x (if --with-asir-gc=yes) [no] --with-distdir specify the spool for fetching. [no] --with-pari use the PARI library. [no] --with-mpi use the MPI library. [no] @@ -1478,10 +1509,10 @@ fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -configure -generated by GNU Autoconf 2.68 +asir configure 1.15 +generated by GNU Autoconf 2.69 -Copyright (C) 2010 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF @@ -1594,7 +1625,7 @@ $as_echo "$ac_try_echo"; } >&5 test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext + test -x conftest$ac_exeext }; then : ac_retval=0 else @@ -1824,7 +1855,8 @@ int main () { static int test_array [1 - 2 * !(($2) >= 0)]; -test_array [0] = 0 +test_array [0] = 0; +return test_array [0]; ; return 0; @@ -1840,7 +1872,8 @@ int main () { static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0 +test_array [0] = 0; +return test_array [0]; ; return 0; @@ -1866,7 +1899,8 @@ int main () { static int test_array [1 - 2 * !(($2) < 0)]; -test_array [0] = 0 +test_array [0] = 0; +return test_array [0]; ; return 0; @@ -1882,7 +1916,8 @@ int main () { static int test_array [1 - 2 * !(($2) >= $ac_mid)]; -test_array [0] = 0 +test_array [0] = 0; +return test_array [0]; ; return 0; @@ -1916,7 +1951,8 @@ int main () { static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0 +test_array [0] = 0; +return test_array [0]; ; return 0; @@ -1988,8 +2024,8 @@ cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by $as_me, which was -generated by GNU Autoconf 2.68. Invocation command line was +It was created by asir $as_me 1.15, which was +generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -2477,7 +2513,7 @@ test -n "$target_alias" && test "$program_prefix$program_suffix$program_transform_name" = \ NONENONEs,x,x, && program_prefix=${target_alias}- -am__api_version='1.11' +am__api_version='1.16' # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or @@ -2516,7 +2552,7 @@ case $as_dir/ in #(( # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. @@ -2574,9 +2610,6 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' @@ -2587,32 +2620,40 @@ case `pwd` in esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac -# Do `set' in a subshell so we don't clobber the current shell's +# Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken -alias in your environment" "$LINENO" 5 - fi - + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done test "$2" = conftest.file ) then @@ -2624,6 +2665,16 @@ Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. @@ -2634,8 +2685,8 @@ test "$program_suffix" != NONE && ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in @@ -2646,15 +2697,15 @@ if test x"${MISSING+set}" != xset; then esac fi # Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " else am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; @@ -2663,10 +2714,10 @@ if test x"${install_sh}" != xset; then esac fi -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. +# will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. @@ -2685,7 +2736,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -2725,7 +2776,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -2776,7 +2827,7 @@ do test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do - { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ @@ -2805,12 +2856,6 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. @@ -2829,7 +2874,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -2893,6 +2938,45 @@ else fi rmdir .tst 2>/dev/null +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." @@ -2914,8 +2998,8 @@ fi # Define the identity of the package. - PACKAGE=asir - VERSION=20030307 + PACKAGE='asir' + VERSION='1.15' cat >>confdefs.h <<_ACEOF @@ -2943,19 +3027,72 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' -AMTAR=${AMTAR-"${am_missing_run}tar"} +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. @@ -3001,7 +3138,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3041,7 +3178,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3094,7 +3231,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3135,7 +3272,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue @@ -3193,7 +3330,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3237,7 +3374,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3683,8 +3820,7 @@ cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include -#include -#include +struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); @@ -3768,50 +3904,109 @@ ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" - -am_make=${MAKE-make} -cat > confinc << 'END' +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5 +$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; } +cat > confinc.mk << 'END' am__doit: - @echo this is the am__doit target + @echo this is the am__doit target >confinc.out .PHONY: am__doit END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5 + (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + case $?:`cat confinc.out 2>/dev/null` in #( + '0:this is the am__doit target') : + case $s in #( + BSD) : + am__include='.include' am__quote='"' ;; #( + *) : + am__include='include' am__quote='' ;; +esac ;; #( + *) : ;; - esac -fi +esac + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5 +$as_echo "${_am_result}" >&6; } - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; @@ -3820,6 +4015,7 @@ fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' + am__nodep='_no' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= @@ -3842,8 +4038,9 @@ else # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. @@ -3877,16 +4074,16 @@ else : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - # We check with `-c' and `-o' for the sake of the "dashmstdout" + # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in @@ -3895,16 +4092,16 @@ else test "$am__universal" = false || continue ;; nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; - msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} @@ -3987,7 +4184,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -4027,7 +4224,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -4080,7 +4277,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_YACC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -4951,7 +5148,7 @@ elif test `basename ./"${CC}"` = "icc" ; then CFLAGS="-g -O" fi -GC=gc6.8 +GC=gc-7.4.2 # Check whether --with-asir-gc was given. if test "${with_asir_gc+set}" = set; then : @@ -4974,39 +5171,15 @@ if test -n "${host_alias}" ; then GC_CONFIGURE_ARGS="--host=${host_alias} ${GC_CONFIGURE_ARGS}" fi -# Check whether --with-gc7 was given. -if test "${with_gc7+set}" = set; then : - withval=$with_gc7; with_gc7=${withval} -else - with_gc7=no -fi +$as_echo "#define GC7 1" >>confdefs.h -if test ${with_gc7:=no} != no; then - case "${with_gc7}" in - 7*) GC_VERSION=${with_gc7} ;; - *) GC_VERSION=7.1 ;; - esac - GC=gc-${GC_VERSION} - $as_echo "#define GC7 1" >>confdefs.h -fi - - if test "$with_gc7" != no; then - USE_GC7_TRUE= - USE_GC7_FALSE='#' -else - USE_GC7_TRUE='#' - USE_GC7_FALSE= -fi - - - # Check whether --with-distdir was given. if test "${with_distdir+set}" = set; then : withval=$with_distdir; with_distdir=${withval} @@ -5060,7 +5233,7 @@ do for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue + as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in @@ -5126,7 +5299,7 @@ do for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue + as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in @@ -5381,6 +5554,19 @@ else fi +GMPLIB="-L${libdir} -lmpc -lmpfr -lgmp" +# Check whether --enable-static_gmp was given. +if test "${enable_static_gmp+set}" = set; then : + enableval=$enable_static_gmp; enable_static_gmp=yes +else + enable_static_gmp=no +fi + +if test ${enable_static_gmp:=no} != no ; then + GMPLIB='${libdir}/libmpc.a ${libdir}/libmpfr.a ${libdir}/libgmp.a' +fi + + # Check whether --enable-interval was given. if test "${enable_interval+set}" = set; then : enableval=$enable_interval; enable_interval=${enableval} @@ -5460,7 +5646,7 @@ i[3-6]86-*-linux*|x86-*-linux*) $as_echo "#define _BSD_SOURCE 1" >>confdefs.h ;; -*-*-cygwin*) +i[3-6]86-*-cygwin*|x86-*-cygwin*) asm_obj="${i386_aout_obj}" ;; i[3-6]86-*-interix*) @@ -5486,6 +5672,9 @@ sparc-sun-solaris2.*) asm_obj="${generic_obj}" $as_echo "#define __DARWIN__ 1" >>confdefs.h + if test -d /usr/X11/include -a x"${X_CFLAGS}" = x ; then + X_CFLAGS=-I/usr/X11/include + fi ;; arm*-*-linux*) asm_obj="${generic_obj}" @@ -5493,6 +5682,10 @@ arm*-*-linux*) CFLAGS="${CFLAGS} -fsigned-char" fi ;; +*-*-mingw*) + WSLIB="-lws2_32" + asm_obj="${generic_obj}" + ;; *) asm_obj="${generic_obj}" ;; @@ -5500,6 +5693,18 @@ esac + +for ac_func in sigaction +do : + ac_fn_c_check_func "$LINENO" "sigaction" "ac_cv_func_sigaction" +if test "x$ac_cv_func_sigaction" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SIGACTION 1 +_ACEOF + +fi +done + ac_fn_c_check_func "$LINENO" "socket" "ac_cv_func_socket" if test "x$ac_cv_func_socket" = xyes; then : @@ -5750,6 +5955,14 @@ LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' @@ -5770,10 +5983,6 @@ if test -z "${am__fastdepCC_TRUE}" && test -z "${am__f as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi -if test -z "${USE_GC7_TRUE}" && test -z "${USE_GC7_FALSE}"; then - as_fn_error $? "conditional \"USE_GC7\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi if test -z "${USE_PLOT_TRUE}" && test -z "${USE_PLOT_FALSE}"; then as_fn_error $? "conditional \"USE_PLOT\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 @@ -6076,16 +6285,16 @@ if (echo >conf$$.file) 2>/dev/null; then # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. + # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' + as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null @@ -6145,29 +6354,17 @@ else as_mkdir_p=false fi -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -6187,8 +6384,8 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by $as_me, which was -generated by GNU Autoconf 2.68. Invocation command line was +This file was extended by asir $as_me 1.15, which was +generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -6244,11 +6441,11 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -config.status -configured by $0, generated by GNU Autoconf 2.68, +asir config.status 1.15 +configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" -Copyright (C) 2010 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -6328,7 +6525,7 @@ fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' @@ -6352,7 +6549,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" +AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}" _ACEOF @@ -6803,32 +7000,38 @@ $as_echo "$as_me: executing $ac_file commands" >&6;} case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files + # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac + # TODO: see whether this extra hack can be removed once we start + # requiring Autoconf 2.70 or later. + case $CONFIG_FILES in #( + *\'*) : + eval set x "$CONFIG_FILES" ;; #( + *) : + set x $CONFIG_FILES ;; #( + *) : + ;; +esac shift - for mf + # Used to flag and report bootstrapping failures. + am_rc=0 + for am_mf do # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line + am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile which includes + # dependency-tracking related rules and includes. + # Grep'ing the whole file directly is not great: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | + sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ + || continue + am_dirpart=`$as_dirname -- "$am_mf" || +$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$am_mf" : 'X\(//\)[^/]' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$am_mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -6846,55 +7049,48 @@ $as_echo X"$mf" | q } s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + am_filepart=`$as_basename -- "$am_mf" || +$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$am_mf" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } - /^X\(\/\/\)[^/].*/{ + /^X\/\(\/\/\)$/{ s//\1/ q } - /^X\(\/\/\)$/{ + /^X\/\(\/\).*/{ s//\1/ q } - /^X\(\/\).*/{ - s//\1/ - q - } s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done + { echo "$as_me:$LINENO: cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles" >&5 + (cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } || am_rc=$? done + if test $am_rc -ne 0; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "Something went wrong bootstrapping makefile fragments + for automatic dependency tracking. Try re-running configure with the + '--disable-dependency-tracking' option to at least be able to build + the package (albeit without support for automatic dependency tracking). +See \`config.log' for more details" "$LINENO" 5; } + fi + { am_dirpart=; unset am_dirpart;} + { am_filepart=; unset am_filepart;} + { am_mf=; unset am_mf;} + { am_rc=; unset am_rc;} + rm -f conftest-deps.mk } ;;