=================================================================== RCS file: /home/cvs/OpenXM_contrib2/asir2000/configure,v retrieving revision 1.53 retrieving revision 1.64 diff -u -p -r1.53 -r1.64 --- OpenXM_contrib2/asir2000/configure 2012/05/30 02:24:33 1.53 +++ OpenXM_contrib2/asir2000/configure 2016/08/24 05:33:58 1.64 @@ -1,11 +1,9 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.68. +# Generated by GNU Autoconf 2.69 for asir 1.15. # # -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software -# Foundation, Inc. +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation @@ -134,6 +132,31 @@ export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh @@ -167,7 +190,8 @@ if ( set x; as_fn_ret_success y && test x = \"\$1\" ); else exitcode=1; echo positional parameters were not saved. fi -test x\$exitcode = x0 || exit 1" +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && @@ -212,21 +236,25 @@ IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. - # Preserve -v and -x to the replacement shell. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL - case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; - esac - exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 fi if test x$as_have_required = xno; then : @@ -328,6 +356,14 @@ $as_echo X"$as_dir" | } # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take @@ -449,6 +485,10 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). @@ -483,16 +523,16 @@ if (echo >conf$$.file) 2>/dev/null; then # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. + # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' + as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null @@ -504,28 +544,8 @@ else as_mkdir_p=false fi -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x +as_test_x='test -x' +as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -555,12 +575,12 @@ MFLAGS= MAKEFLAGS= # Identity of this package. -PACKAGE_NAME= -PACKAGE_TARNAME= -PACKAGE_VERSION= -PACKAGE_STRING= -PACKAGE_BUGREPORT= -PACKAGE_URL= +PACKAGE_NAME='asir' +PACKAGE_TARNAME='asir' +PACKAGE_VERSION='1.15' +PACKAGE_STRING='asir 1.15' +PACKAGE_BUGREPORT='' +PACKAGE_URL='' ac_unique_file="LICENSE" # Factoring default headers for most tests. @@ -603,6 +623,7 @@ ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS +WSLIB asm_obj USE_GC_SPARC64 libasir_postfix @@ -634,6 +655,7 @@ LN_S am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE +am__nodep AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE @@ -650,6 +672,10 @@ CC MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V am__untar am__tar AMTAR @@ -726,6 +752,7 @@ SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking +enable_silent_rules enable_maintainer_mode enable_dependency_tracking with_x @@ -790,7 +817,7 @@ sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE}' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' @@ -1205,8 +1232,6 @@ target=$target_alias if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used" >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -1292,7 +1317,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures this package to adapt to many kinds of systems. +\`configure' configures asir 1.15 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1340,7 +1365,7 @@ Fine tuning of the installation directories: --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] + --docdir=DIR documentation root [DATAROOTDIR/doc/asir] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] @@ -1366,17 +1391,24 @@ _ACEOF fi if test -n "$ac_init_help"; then - + case $ac_init_help in + short | recursive ) echo "Configuration of asir 1.15:";; + esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-maintainer-mode + enable make rules and dependencies not useful (and + sometimes confusing) to the casual installer + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build --enable-shared enable linking shared libraries. [no] --enable-plot enable plot feature. [no] --enable-interval enable interval feature. [no] @@ -1474,10 +1506,10 @@ fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -configure -generated by GNU Autoconf 2.68 +asir configure 1.15 +generated by GNU Autoconf 2.69 -Copyright (C) 2010 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF @@ -1590,7 +1622,7 @@ $as_echo "$ac_try_echo"; } >&5 test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext + test -x conftest$ac_exeext }; then : ac_retval=0 else @@ -1820,7 +1852,8 @@ int main () { static int test_array [1 - 2 * !(($2) >= 0)]; -test_array [0] = 0 +test_array [0] = 0; +return test_array [0]; ; return 0; @@ -1836,7 +1869,8 @@ int main () { static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0 +test_array [0] = 0; +return test_array [0]; ; return 0; @@ -1862,7 +1896,8 @@ int main () { static int test_array [1 - 2 * !(($2) < 0)]; -test_array [0] = 0 +test_array [0] = 0; +return test_array [0]; ; return 0; @@ -1878,7 +1913,8 @@ int main () { static int test_array [1 - 2 * !(($2) >= $ac_mid)]; -test_array [0] = 0 +test_array [0] = 0; +return test_array [0]; ; return 0; @@ -1912,7 +1948,8 @@ int main () { static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0 +test_array [0] = 0; +return test_array [0]; ; return 0; @@ -1984,8 +2021,8 @@ cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by $as_me, which was -generated by GNU Autoconf 2.68. Invocation command line was +It was created by asir $as_me 1.15, which was +generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -2473,7 +2510,7 @@ test -n "$target_alias" && test "$program_prefix$program_suffix$program_transform_name" = \ NONENONEs,x,x, && program_prefix=${target_alias}- -am__api_version='1.11' +am__api_version='1.15' # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or @@ -2512,7 +2549,7 @@ case $as_dir/ in #(( # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. @@ -2570,9 +2607,6 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' @@ -2583,32 +2617,40 @@ case `pwd` in esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac -# Do `set' in a subshell so we don't clobber the current shell's +# Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken -alias in your environment" "$LINENO" 5 - fi - + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done test "$2" = conftest.file ) then @@ -2620,6 +2662,16 @@ Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. @@ -2630,8 +2682,8 @@ test "$program_suffix" != NONE && ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in @@ -2642,15 +2694,15 @@ if test x"${MISSING+set}" != xset; then esac fi # Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " else am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi -if test x"${install_sh}" != xset; then +if test x"${install_sh+set}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; @@ -2659,10 +2711,10 @@ if test x"${install_sh}" != xset; then esac fi -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. +# will honor the 'STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. @@ -2681,7 +2733,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -2721,7 +2773,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -2772,7 +2824,7 @@ do test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do - { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ @@ -2801,12 +2853,6 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. @@ -2825,7 +2871,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -2889,6 +2935,45 @@ else fi rmdir .tst 2>/dev/null +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." @@ -2910,8 +2995,8 @@ fi # Define the identity of the package. - PACKAGE=asir - VERSION=20030307 + PACKAGE='asir' + VERSION='1.15' cat >>confdefs.h <<_ACEOF @@ -2939,19 +3024,72 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' -AMTAR=${AMTAR-"${am_missing_run}tar"} +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. @@ -2997,7 +3135,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3037,7 +3175,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3090,7 +3228,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3131,7 +3269,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue @@ -3189,7 +3327,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3233,7 +3371,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3679,8 +3817,7 @@ cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include -#include -#include +struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); @@ -3764,6 +3901,65 @@ ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" @@ -3783,7 +3979,7 @@ am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. +# Ignore all kinds of additional output from 'make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include @@ -3816,6 +4012,7 @@ fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' + am__nodep='_no' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= @@ -3838,8 +4035,9 @@ else # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. @@ -3873,16 +4071,16 @@ else : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - # We check with `-c' and `-o' for the sake of the "dashmstdout" + # We check with '-c' and '-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in @@ -3891,16 +4089,16 @@ else test "$am__universal" = false || continue ;; nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; - msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} @@ -3983,7 +4181,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -4023,7 +4221,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -4076,7 +4274,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_YACC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -4322,6 +4520,7 @@ ac_x_header_dirs=' /usr/local/X11R5/include /usr/local/X11R4/include +/opt/X11/include /usr/local/include/X11 /usr/local/include/X11R7 /usr/local/include/X11R6 @@ -4947,7 +5146,7 @@ elif test `basename ./"${CC}"` = "icc" ; then CFLAGS="-g -O" fi -GC=gc-7.2 +GC=gc-7.4.2 # Check whether --with-asir-gc was given. if test "${with_asir_gc+set}" = set; then : @@ -5032,7 +5231,7 @@ do for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue + as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in @@ -5098,7 +5297,7 @@ do for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue + as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in @@ -5432,7 +5631,7 @@ i[3-6]86-*-linux*|x86-*-linux*) $as_echo "#define _BSD_SOURCE 1" >>confdefs.h ;; -*-*-cygwin*) +i[3-6]86-*-cygwin*|x86-*-cygwin*) asm_obj="${i386_aout_obj}" ;; i[3-6]86-*-interix*) @@ -5458,6 +5657,9 @@ sparc-sun-solaris2.*) asm_obj="${generic_obj}" $as_echo "#define __DARWIN__ 1" >>confdefs.h + if test -d /usr/X11/include -a x"${X_CFLAGS}" = x ; then + X_CFLAGS=-I/usr/X11/include + fi ;; arm*-*-linux*) asm_obj="${generic_obj}" @@ -5465,6 +5667,10 @@ arm*-*-linux*) CFLAGS="${CFLAGS} -fsigned-char" fi ;; +*-*-mingw*) + WSLIB="-lws2_32" + asm_obj="${generic_obj}" + ;; *) asm_obj="${generic_obj}" ;; @@ -5472,6 +5678,18 @@ esac + +for ac_func in sigaction +do : + ac_fn_c_check_func "$LINENO" "sigaction" "ac_cv_func_sigaction" +if test "x$ac_cv_func_sigaction" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SIGACTION 1 +_ACEOF + +fi +done + ac_fn_c_check_func "$LINENO" "socket" "ac_cv_func_socket" if test "x$ac_cv_func_socket" = xyes; then : @@ -5722,6 +5940,14 @@ LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' @@ -6044,16 +6270,16 @@ if (echo >conf$$.file) 2>/dev/null; then # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. + # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' + as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null @@ -6113,29 +6339,17 @@ else as_mkdir_p=false fi -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -6155,8 +6369,8 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by $as_me, which was -generated by GNU Autoconf 2.68. Invocation command line was +This file was extended by asir $as_me 1.15, which was +generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -6212,11 +6426,11 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -config.status -configured by $0, generated by GNU Autoconf 2.68, +asir config.status 1.15 +configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" -Copyright (C) 2010 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -6296,7 +6510,7 @@ fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' @@ -6771,7 +6985,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6;} case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files + # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in @@ -6784,7 +6998,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6;} # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but + # We used to match only the files named 'Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. @@ -6818,21 +7032,19 @@ $as_echo X"$mf" | continue fi # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. + # from the Makefile without running 'make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue + test -z "$am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" ||