OpenXM_contrib2/asir2000/gc/Makefile.direct - diff

Return to Makefile.direct CVS log

Up to [local] / OpenXM_contrib2 / asir2000 / gc

Diff for /OpenXM_contrib2/asir2000/gc/Makefile.direct between version 1.1 and 1.2

version 1.1, 2002/07/24 08:00:05

version 1.2, 2003/06/24 05:11:31

Line 34 CFLAGS= -O -I$(srcdir)/include -DATOMIC_UNCOLLECTABLE

# To build the parallel collector on Linux, add to the above:

# -DGC_LINUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC

# To build the parallel collector n a static library on HP/UX, add to the above:

# To build the parallel collector in a static library on HP/UX,

# add to the above:

# -DGC_HPUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC -DUSE_HPUX_TLS -D_POSIX_C_SOURCE=199506L

# To build the thread-safe collector on Tru64, add to the above:

# -pthread -DGC_OSF1_THREADS

# HOSTCC and HOSTCFLAGS are used to build executables that will be run as

# part of the build process, i.e. on the build machine. These will usually

Line 70 HOSTCFLAGS=$(CFLAGS)

Line 73 HOSTCFLAGS=$(CFLAGS)

# -DGC_OSF1_THREADS enables support for Tru64 pthreads. Untested.

# -DGC_FREEBSD_THREADS enables support for FreeBSD pthreads. Untested.

# Appeared to run into some underlying thread problems.

# -DGC_MACOSX_THREADS enables support for Mac OS X pthreads. Untested.

# -DGC_DGUX386_THREADS enables support for DB/UX on I386 threads.

# See README.DGUX386.

# -DGC_WIN32_THREADS enables support for win32 threads. That makes sense

# for this Makefile only under Cygwin.

# -DGC_THREADS should set the appropriate one of the above macros.

# It assumes pthreads for Solaris.

# -DALL_INTERIOR_POINTERS allows all pointers to the interior

# of objects to be recognized. (See gc_priv.h for consequences.)

# Alternatively, GC_all_interior_pointers can be set at process

Line 105 HOSTCFLAGS=$(CFLAGS)

Line 113 HOSTCFLAGS=$(CFLAGS)

# See gc_cpp.h for details. No effect on the C part of the collector.

# This is defined implicitly in a few environments. Must also be defined

# by clients that use gc_cpp.h.

# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be

# -DREDIRECT_MALLOC=X causes malloc to be defined as alias for X.

# defined as aliases for X, GC_realloc, and GC_free, respectively.

# Unless the following macros are defined, realloc is also redirected

# to GC_realloc, and free is redirected to GC_free.

# Calloc and strdup are redefined in terms of the new malloc. X should

# be either GC_malloc or GC_malloc_uncollectable, or

# GC_debug_malloc_replacement. (The latter invokes GC_debug_malloc

# with dummy source location information, but still results in

# properly remembered call stacks on Linux/X86 and Solaris/SPARC.)

# properly remembered call stacks on Linux/X86 and Solaris/SPARC.

# It requires that the following two macros also be used.)

# The former is occasionally useful for working around leaks in code

# you don't want to (or can't) look at. It may not work for

# existing code, but it often does. Neither works on all platforms,

Line 123 HOSTCFLAGS=$(CFLAGS)

Line 133 HOSTCFLAGS=$(CFLAGS)

# The canonical use is -DREDIRECT_REALLOC=GC_debug_realloc_replacement,

# together with -DREDIRECT_MALLOC=GC_debug_malloc_replacement to

# generate leak reports with call stacks for both malloc and realloc.

# This also requires the following:

# -DREDIRECT_FREE=X causes free to be redirected to X. The

# canonical use is -DREDIRECT_FREE=GC_debug_free.

# -DIGNORE_FREE turns calls to free into a noop. Only useful with

# -DREDIRECT_MALLOC.

# -DNO_DEBUGGING removes GC_dump and the debugging routines it calls.

Line 210 HOSTCFLAGS=$(CFLAGS)

Line 223 HOSTCFLAGS=$(CFLAGS)

# -DUSE_3DNOW_PREFETCH causes the collector to issue AMD 3DNow style

# prefetch instructions. Same restrictions as USE_I686_PREFETCH.

# Minimally tested. Didn't appear to be an obvious win on a K6-2/500.

# -DUSE_PPC_PREFETCH causes the collector to issue PowerPC style

# prefetch instructions. No effect except on PowerPC OS X platforms.

# Performance impact untested.

# -DGC_USE_LD_WRAP in combination with the old flags listed in README.linux

# causes the collector some system and pthread calls in a more transparent

# fashion than the usual macro-based approach. Requires GNU ld, and

Line 239 HOSTCFLAGS=$(CFLAGS)

Line 255 HOSTCFLAGS=$(CFLAGS)

# makes incremental collection easier. Was enabled by default until 6.0.

# Rarely used, to my knowledge.

# -DHANDLE_FORK attempts to make GC_malloc() work in a child process fork()ed

# from a multithreaded parent. Currently only supported by linux_threads.c.

# from a multithreaded parent. Currently only supported by pthread_support.c.

# (Similar code should work on Solaris or Irix, but it hasn't been tried.)

# -DTEST_WITH_SYSTEM_MALLOC causes gctest to allocate (and leak) large chunks

# of memory with the standard system malloc. This will cause the root

# set and collected heap to grow significantly if malloced memory is

# somehow getting traced by the collector. This has no impact on the

# generated library; it only affects the test.

# -DPOINTER_MASK=0x... causes candidate pointers to be ANDed with the

# given mask before being considered. If either this or the following

# macro is defined, it will be assumed that all pointers stored in

# the heap need to be processed this way. Stack and register pointers

# will be considered both with and without processing.

# These macros are normally needed only to support systems that use

# high-order pointer tags. EXPERIMENTAL.

# -DPOINTER_SHIFT=n causes the collector to left shift candidate pointers

# by the indicated amount before trying to interpret them. Applied

# after POINTER_MASK. EXPERIMENTAL. See also the preceding macro.

CXXFLAGS= $(CFLAGS)

Line 248 AR= ar

Line 279 AR= ar

RANLIB= ranlib

OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o gcj_mlc.o specific.o gc_dlopen.o backgraph.o

OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o aix_irix_threads.o pthread_support.o pthread_stop_world.o darwin_stop_world.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o gcj_mlc.o specific.o gc_dlopen.o backgraph.o win32_threads.o

CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c gcj_mlc.c specific.c gc_dlopen.c backgraph.c

CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c aix_irix_threads.c pthread_support.c pthread_stop_world.c darwin_stop_world.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c gcj_mlc.c specific.c gc_dlopen.c backgraph.c win32_threads.c

CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c include/cord.h include/ec.h include/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC

Line 269 SRCS= $(CSRCS) mips_sgi_mach_dep.S rs6000_mach_dep.s a

Line 300 SRCS= $(CSRCS) mips_sgi_mach_dep.S rs6000_mach_dep.s a

include/private/solaris_threads.h include/gc_backptr.h \

hpux_test_and_clear.s include/gc_gcj.h \

include/gc_local_alloc.h include/private/dbg_mlc.h \

include/private/specific.h powerpc_macosx_mach_dep.s \

include/private/specific.h powerpc_darwin_mach_dep.s \

include/leak_detector.h include/gc_amiga_redirects.h \

include/gc_pthread_redirects.h ia64_save_regs_in_stack.s \

$(CORD_SRCS)

include/gc_config_macros.h include/private/pthread_support.h \

include/private/pthread_stop_world.h include/private/darwin_semaphore.h \

include/private/darwin_stop_world.h $(CORD_SRCS)

DOC_FILES= README.QUICK doc/README.Mac doc/README.MacOSX doc/README.OS2 \

doc/README.amiga doc/README.cords doc/debugging.html \

Line 282 DOC_FILES= README.QUICK doc/README.Mac doc/README.MacO

Line 315 DOC_FILES= README.QUICK doc/README.Mac doc/README.MacO

doc/README.contributors doc/README.changes doc/gc.man \

doc/README.environment doc/tree.html doc/gcdescr.html \

doc/README.autoconf doc/README.macros doc/README.ews4800 \

doc/README.DGUX386 doc/README.arm.cross

doc/README.DGUX386 doc/README.arm.cross doc/leak.html \

doc/scale.html doc/gcinterface.html

TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \

tests/leak_test.c tests/thread_leak_test.c

Line 290 TESTS= tests/test.c tests/test_cpp.cc tests/trace_test

Line 324 TESTS= tests/test.c tests/test_cpp.cc tests/trace_test

GNU_BUILD_FILES= configure.in Makefile.am configure acinclude.m4 \

libtool.m4 install-sh configure.host Makefile.in \

ltconfig aclocal.m4 config.sub config.guess \

include/Makefile.am include/Makefile.in \

doc/Makefile.am doc/Makefile.in \

ltmain.sh mkinstalldirs depcomp missing

OTHER_MAKEFILES= OS2_MAKEFILE NT_MAKEFILE NT_THREADS_MAKEFILE gc.mak \

Line 302 OTHER_FILES= Makefile setjmp_t.c callprocs pc_excludes

Line 338 OTHER_FILES= Makefile setjmp_t.c callprocs pc_excludes

MacProjects.sit.hqx MacOS.c \

Mac_files/datastart.c Mac_files/dataend.c \

Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \

add_gc_prefix.c gc_cpp.cpp win32_threads.c \

add_gc_prefix.c gc_cpp.cpp \

version.h AmigaOS.c \

$(TESTS) $(GNU_BUILD_FILES) $(OTHER_MAKEFILES)

Line 347 mach_dep.o $(SRCS)

Line 383 mach_dep.o $(SRCS)

$(OBJS) tests/test.o dyn_load.o dyn_load_sunos53.o: \

$(srcdir)/include/private/gc_priv.h \

$(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \

$(srcdir)/include/gc.h \

$(srcdir)/include/gc.h $(srcdir)/include/gc_pthread_redirects.h \

$(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \

Makefile

$(srcdir)/include/gc_config_macros.h Makefile

# The dependency on Makefile is needed. Changing

# options such as -DSILENT affects the size of GC_arrays,

# invalidating all .o files that rely on gc_priv.h

mark.o typd_mlc.o finalize.o ptr_chck.o: $(srcdir)/include/gc_mark.h $(srcdir)/include/private/gc_pmark.h

specific.o linux_threads.o: $(srcdir)/include/private/specific.h

specific.o pthread_support.o: $(srcdir)/include/private/specific.h

solaris_threads.o solaris_pthreads.o: $(srcdir)/include/private/solaris_threads.h

Line 453 liblinuxgc.so: $(OBJS) dyn_load.o

Line 489 liblinuxgc.so: $(OBJS) dyn_load.o

mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.S \

$(srcdir)/mips_ultrix_mach_dep.s \

$(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_macosx_mach_dep.s \

$(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_darwin_mach_dep.s \

$(srcdir)/sparc_mach_dep.S $(srcdir)/sparc_sunos4_mach_dep.s \

$(srcdir)/ia64_save_regs_in_stack.s \

$(srcdir)/sparc_netbsd_mach_dep.s $(UTILS)

rm -f mach_dep.o

./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.S

./if_mach MIPS IRIX5 $(CC) -E $(srcdir)/mips_sgi_mach_dep.S \

| ./if_mach MIPS IRIX5 grep -v "^\#" > $(srcdir)/mips_sgi_mach_dep.s

./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s

./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s

./if_mach POWERPC MACOSX $(AS) -o mach_dep.o $(srcdir)/powerpc_macosx_mach_dep.s

./if_mach POWERPC MACOSX $(AS) -o mach_dep.o $(srcdir)/powerpc_darwin_mach_dep.s

./if_mach ALPHA "" $(CC) -c -o mach_dep.o $(srcdir)/alpha_mach_dep.S

./if_mach ALPHA LINUX $(CC) -c -o mach_dep.o $(srcdir)/alpha_mach_dep.S

./if_mach SPARC SUNOS5 $(CC) -c -o mach_dep.o $(srcdir)/sparc_mach_dep.S

./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s

./if_mach SPARC OPENBSD $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s

Line 528 if_not_there: $(srcdir)/if_not_there.c

Line 565 if_not_there: $(srcdir)/if_not_there.c

clean:

rm -f gc.a *.o *.exe tests/*.o gctest gctest_dyn_link test_cpp \

setjmp_test mon.out gmon.out a.out core if_not_there if_mach \

threadlibs $(CORD_OBJS) cord/cordtest cord/de

threadlibs $(CORD_OBJS) cord/cordtest cord/de mips_sgi_mach_dep.s

-rm -f *~

gctest: tests/test.o gc.a $(UTILS)

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>