Annotation of OpenXM_contrib2/asir2000/gc/doc/Makefile.in, Revision 1.1
1.1 ! noro 1: # Makefile.in generated by automake 1.6.3 from Makefile.am.
! 2: # @configure_input@
! 3:
! 4: # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
! 5: # Free Software Foundation, Inc.
! 6: # This Makefile.in is free software; the Free Software Foundation
! 7: # gives unlimited permission to copy and/or distribute it,
! 8: # with or without modifications, as long as this notice is preserved.
! 9:
! 10: # This program is distributed in the hope that it will be useful,
! 11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! 12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! 13: # PARTICULAR PURPOSE.
! 14:
! 15: @SET_MAKE@
! 16:
! 17: #
! 18: #
! 19: # THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
! 20: # OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
! 21: #
! 22: # Permission is hereby granted to use or copy this program
! 23: # for any purpose, provided the above notices are retained on all copies.
! 24: # Permission to modify the code and to distribute modified code is granted,
! 25: # provided the above notices are retained, and a notice that the code was
! 26: # modified is included with the above copyright notice.
! 27: #
! 28: # Modified by: Grzegorz Jakacki <jakacki at acm dot org>
! 29: SHELL = @SHELL@
! 30:
! 31: srcdir = @srcdir@
! 32: top_srcdir = @top_srcdir@
! 33: VPATH = @srcdir@
! 34: prefix = @prefix@
! 35: exec_prefix = @exec_prefix@
! 36:
! 37: bindir = @bindir@
! 38: sbindir = @sbindir@
! 39: libexecdir = @libexecdir@
! 40: datadir = @datadir@
! 41: sysconfdir = @sysconfdir@
! 42: sharedstatedir = @sharedstatedir@
! 43: localstatedir = @localstatedir@
! 44: libdir = @libdir@
! 45: infodir = @infodir@
! 46: mandir = @mandir@
! 47: includedir = @includedir@
! 48: oldincludedir = /usr/include
! 49: pkgdatadir = $(datadir)/@PACKAGE@
! 50: pkglibdir = $(libdir)/@PACKAGE@
! 51: pkgincludedir = $(includedir)/@PACKAGE@
! 52: top_builddir = ..
! 53:
! 54: ACLOCAL = @ACLOCAL@
! 55: AUTOCONF = @AUTOCONF@
! 56: AUTOMAKE = @AUTOMAKE@
! 57: AUTOHEADER = @AUTOHEADER@
! 58:
! 59: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
! 60: INSTALL = @INSTALL@
! 61: INSTALL_PROGRAM = @INSTALL_PROGRAM@
! 62: INSTALL_DATA = @INSTALL_DATA@
! 63: install_sh_DATA = $(install_sh) -c -m 644
! 64: install_sh_PROGRAM = $(install_sh) -c
! 65: install_sh_SCRIPT = $(install_sh) -c
! 66: INSTALL_SCRIPT = @INSTALL_SCRIPT@
! 67: INSTALL_HEADER = $(INSTALL_DATA)
! 68: transform = @program_transform_name@
! 69: NORMAL_INSTALL = :
! 70: PRE_INSTALL = :
! 71: POST_INSTALL = :
! 72: NORMAL_UNINSTALL = :
! 73: PRE_UNINSTALL = :
! 74: POST_UNINSTALL = :
! 75: host_alias = @host_alias@
! 76: host_triplet = @host@
! 77:
! 78: EXEEXT = @EXEEXT@
! 79: OBJEXT = @OBJEXT@
! 80: PATH_SEPARATOR = @PATH_SEPARATOR@
! 81: AMTAR = @AMTAR@
! 82: AR = @AR@
! 83: AS = @AS@
! 84: AWK = @AWK@
! 85: CC = @CC@
! 86: CCAS = @CCAS@
! 87: CCASFLAGS = @CCASFLAGS@
! 88: CFLAGS = @CFLAGS@
! 89: CXX = @CXX@
! 90: CXXFLAGS = @CXXFLAGS@
! 91: CXXINCLUDES = @CXXINCLUDES@
! 92: DEPDIR = @DEPDIR@
! 93: DLLTOOL = @DLLTOOL@
! 94: ECHO = @ECHO@
! 95: EXTRA_TEST_LIBS = @EXTRA_TEST_LIBS@
! 96: GC_CFLAGS = @GC_CFLAGS@
! 97: GC_VERSION = @GC_VERSION@
! 98: INCLUDES = @INCLUDES@
! 99: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
! 100: LIBTOOL = @LIBTOOL@
! 101: LN_S = @LN_S@
! 102: MAINT = @MAINT@
! 103: MY_CFLAGS = @MY_CFLAGS@
! 104: OBJDUMP = @OBJDUMP@
! 105: PACKAGE = @PACKAGE@
! 106: RANLIB = @RANLIB@
! 107: STRIP = @STRIP@
! 108: THREADLIBS = @THREADLIBS@
! 109: VERSION = @VERSION@
! 110: addincludes = @addincludes@
! 111: addlibs = @addlibs@
! 112: addobjs = @addobjs@
! 113: addtests = @addtests@
! 114: am__include = @am__include@
! 115: am__quote = @am__quote@
! 116: install_sh = @install_sh@
! 117: target_all = @target_all@
! 118:
! 119: # installed documentation
! 120: #
! 121: dist_pkgdata_DATA = barrett_diagram debugging.html gc.man \
! 122: gcdescr.html README README.amiga README.arm.cross \
! 123: README.autoconf README.changes README.contributors \
! 124: README.cords README.DGUX386 README.dj README.environment \
! 125: README.ews4800 README.hp README.linux README.Mac \
! 126: README.MacOSX README.macros README.OS2 README.rs6000 \
! 127: README.sgi README.solaris2 README.uts README.win32 \
! 128: tree.html leak.html gcinterface.html scale.html
! 129:
! 130: subdir = doc
! 131: mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
! 132: CONFIG_CLEAN_FILES =
! 133: DIST_SOURCES =
! 134: DATA = $(dist_pkgdata_DATA)
! 135:
! 136: DIST_COMMON = README $(dist_pkgdata_DATA) Makefile.am Makefile.in
! 137: all: all-am
! 138:
! 139: .SUFFIXES:
! 140: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
! 141: cd $(top_srcdir) && \
! 142: $(AUTOMAKE) --gnu doc/Makefile
! 143: Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
! 144: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
! 145:
! 146: mostlyclean-libtool:
! 147: -rm -f *.lo
! 148:
! 149: clean-libtool:
! 150: -rm -rf .libs _libs
! 151:
! 152: distclean-libtool:
! 153: -rm -f libtool
! 154: uninstall-info-am:
! 155: dist_pkgdataDATA_INSTALL = $(INSTALL_DATA)
! 156: install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
! 157: @$(NORMAL_INSTALL)
! 158: $(mkinstalldirs) $(DESTDIR)$(pkgdatadir)
! 159: @list='$(dist_pkgdata_DATA)'; for p in $$list; do \
! 160: if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
! 161: f="`echo $$p | sed -e 's|^.*/||'`"; \
! 162: echo " $(dist_pkgdataDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgdatadir)/$$f"; \
! 163: $(dist_pkgdataDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgdatadir)/$$f; \
! 164: done
! 165:
! 166: uninstall-dist_pkgdataDATA:
! 167: @$(NORMAL_UNINSTALL)
! 168: @list='$(dist_pkgdata_DATA)'; for p in $$list; do \
! 169: f="`echo $$p | sed -e 's|^.*/||'`"; \
! 170: echo " rm -f $(DESTDIR)$(pkgdatadir)/$$f"; \
! 171: rm -f $(DESTDIR)$(pkgdatadir)/$$f; \
! 172: done
! 173: tags: TAGS
! 174: TAGS:
! 175:
! 176: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
! 177:
! 178: top_distdir = ..
! 179: distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
! 180:
! 181: distdir: $(DISTFILES)
! 182: @list='$(DISTFILES)'; for file in $$list; do \
! 183: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
! 184: dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
! 185: if test "$$dir" != "$$file" && test "$$dir" != "."; then \
! 186: dir="/$$dir"; \
! 187: $(mkinstalldirs) "$(distdir)$$dir"; \
! 188: else \
! 189: dir=''; \
! 190: fi; \
! 191: if test -d $$d/$$file; then \
! 192: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
! 193: cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
! 194: fi; \
! 195: cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
! 196: else \
! 197: test -f $(distdir)/$$file \
! 198: || cp -p $$d/$$file $(distdir)/$$file \
! 199: || exit 1; \
! 200: fi; \
! 201: done
! 202: check-am: all-am
! 203: check: check-am
! 204: all-am: Makefile $(DATA)
! 205:
! 206: installdirs:
! 207: $(mkinstalldirs) $(DESTDIR)$(pkgdatadir)
! 208:
! 209: install: install-am
! 210: install-exec: install-exec-am
! 211: install-data: install-data-am
! 212: uninstall: uninstall-am
! 213:
! 214: install-am: all-am
! 215: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! 216:
! 217: installcheck: installcheck-am
! 218: install-strip:
! 219: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! 220: INSTALL_STRIP_FLAG=-s \
! 221: `test -z '$(STRIP)' || \
! 222: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
! 223: mostlyclean-generic:
! 224:
! 225: clean-generic:
! 226:
! 227: distclean-generic:
! 228: -rm -f Makefile $(CONFIG_CLEAN_FILES)
! 229:
! 230: maintainer-clean-generic:
! 231: @echo "This command is intended for maintainers to use"
! 232: @echo "it deletes files that may require special tools to rebuild."
! 233: clean: clean-am
! 234:
! 235: clean-am: clean-generic clean-libtool mostlyclean-am
! 236:
! 237: distclean: distclean-am
! 238:
! 239: distclean-am: clean-am distclean-generic distclean-libtool
! 240:
! 241: dvi: dvi-am
! 242:
! 243: dvi-am:
! 244:
! 245: info: info-am
! 246:
! 247: info-am:
! 248:
! 249: install-data-am: install-dist_pkgdataDATA
! 250:
! 251: install-exec-am:
! 252:
! 253: install-info: install-info-am
! 254:
! 255: install-man:
! 256:
! 257: installcheck-am:
! 258:
! 259: maintainer-clean: maintainer-clean-am
! 260:
! 261: maintainer-clean-am: distclean-am maintainer-clean-generic
! 262:
! 263: mostlyclean: mostlyclean-am
! 264:
! 265: mostlyclean-am: mostlyclean-generic mostlyclean-libtool
! 266:
! 267: uninstall-am: uninstall-dist_pkgdataDATA uninstall-info-am
! 268:
! 269: .PHONY: all all-am check check-am clean clean-generic clean-libtool \
! 270: distclean distclean-generic distclean-libtool distdir dvi \
! 271: dvi-am info info-am install install-am install-data \
! 272: install-data-am install-dist_pkgdataDATA install-exec \
! 273: install-exec-am install-info install-info-am install-man \
! 274: install-strip installcheck installcheck-am installdirs \
! 275: maintainer-clean maintainer-clean-generic mostlyclean \
! 276: mostlyclean-generic mostlyclean-libtool uninstall uninstall-am \
! 277: uninstall-dist_pkgdataDATA uninstall-info-am
! 278:
! 279: # Tell versions [3.59,3.63) of GNU make to not export all variables.
! 280: # Otherwise a system limit (for SysV at least) may be exceeded.
! 281: .NOEXPORT:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [local] / OpenXM_contrib2 / asir2000 / gc / doc